3975 Hmi Jobs - Page 45

Skills: Rockwell Studio 5000, PLC Allen Bradley, Industrial Automation, ControlLogix, RSLogix 5000, FactoryTalk View, PlantPAx, We're Hiring: Project Automation Engineer Rockwell PLC Location: Indore (Office-Based) Experience - 4-10 Years Location - Indore (MP) Qualification - B.E. / Diploma Lead end-to-end commissioning of automation projects involving Allen Bradley PLCs (CompactLogix, ControlLogix), SCADA (FT View), Servo & AC Drives, and field instrumentation. Develop and deploy PLC logic using RSLogix 5000 / Studio 5000, ensuring reliable and optimized automation workflows. Design and configure SCADA systems (FactoryTalk View SE/ME), HMI development, and interface setup. Strong hands-on knowledge of PlantPAx DCS architecture and implementation. Collaborate with cross-functional teams for client requirement analysis, logic development, I/O mapping, and FAT/SAT execution. Troubleshoot hardware and software issues during installation and commissioning. Ensure compliance with safety, quality, and industry standards in all automation solutions. Provide documentation and technical support post-commissioning. If you're passionate about automation and want to be part of innovative industrial solutions, wed love to hear from you. Apply Now! Interested Candidates, Please Share Your Resume At ankur.tiwari@ics-india.co.in | hr@ics-india.co.in Call/WhatsApp: 9109188709 | 9109188512 Company Website: www.ics-india.co.in

Skills: Rockwell Studio 5000, PLC Allen Bradley, Industrial Automation, ControlLogix, RSLogix 5000, FactoryTalk View, PlantPAx, We're Hiring: Project Automation Engineer Rockwell PLC Location: Indore (Office-Based) Experience - 4-10 Years Location - Indore (MP) Qualification - B.E. / Diploma Lead end-to-end commissioning of automation projects involving Allen Bradley PLCs (CompactLogix, ControlLogix), SCADA (FT View), Servo & AC Drives, and field instrumentation. Develop and deploy PLC logic using RSLogix 5000 / Studio 5000, ensuring reliable and optimized automation workflows. Design and configure SCADA systems (FactoryTalk View SE/ME), HMI development, and interface setup. Strong hands-on knowledge of PlantPAx DCS architecture and implementation. Collaborate with cross-functional teams for client requirement analysis, logic development, I/O mapping, and FAT/SAT execution. Troubleshoot hardware and software issues during installation and commissioning. Ensure compliance with safety, quality, and industry standards in all automation solutions. Provide documentation and technical support post-commissioning. If you're passionate about automation and want to be part of innovative industrial solutions, wed love to hear from you. Apply Now! Interested Candidates, Please Share Your Resume At ankur.tiwari@ics-india.co.in | hr@ics-india.co.in Call/WhatsApp: 9109188709 | 9109188512 Company Website: www.ics-india.co.in

You should have knowledge of Controls System (DCS, PLC & SCADA) and Field Instruments (Transmitter, Sensors etc.). It is essential that you understand and review P&ID drawing. Your responsibilities will also include having knowledge of Control panel design, which involves components list, loop drawing, cable schedule, terminal schedule etc. Furthermore, you will be required to develop the logic diagram and HMI for the industrial processes. As an ideal candidate, you are expected to be an Engineering Graduate (Instrumentation & control/Electronics/ Electronics & Communication Engineering) with 2-3 years of experience in engineering and commissioning of automation systems. Knowledge of PCS7 will be advantageous, and candidates with advanced training certificates of Siemens DCS/PLC/SCADA/Instrumentation or similar certificates from other automation vendor (manufacturer) companies will be given preference. A combination of software and hardware design & understanding is desired, and knowledge of power plants will be a plus. In terms of personal attributes and traits, you should possess excellent Interpersonal and Communication skills. Being detail-oriented is a must, along with the ability to work safely in an industrial environment. Creative & Initiative skills for value addition are important, and self-motivation is a key trait that is required for this role.,

Company Profile Since year 2003, Oceaneering’s India Center has been an integral part of operations for Oceaneering’s robust product and service offerings across the globe. This center caters to diverse business needs, from oil and gas field infrastructure, subsea robotics to automated material handling & logistics. Our multidisciplinary team offers a wide spectrum of solutions, encompassing Subsea Engineering, Robotics, Automation, Control Systems, Software Development, Asset Integrity Management, Inspection, ROV operations, Field Network Management, Graphics Design & Animation, and more. In addition to these technical functions, Oceaneering India Center plays host to several crucial business functions, including Finance, Supply Chain Management (SCM), Information Technology (IT), Human Resources (HR), and Health, Safety & Environment (HSE). Our world class infrastructure in India includes modern offices, industry-leading tools and software, equipped labs, and beautiful campuses aligned with the future way of work. Oceaneering in India as well as globally has a great work culture that is flexible, transparent, and collaborative with great team synergy. At Oceaneering India Center, we take pride in “Solving the Unsolvable” by leveraging the diverse expertise within our team. Join us in shaping the future of technology and engineering solutions on a global scale. Position Summary Work under supervision to conceptualize, design and develop Industrialized Solutions in form of Siemens PLC based Control Systems and validate it against all required technical specifications. The Control System Engineer Apprentice will support and indulge in design, development and deployment of Control Logic and hardware for Remotely Operated Vehicles/Vessels (ROVs), Autonomous Mobile Robots (AMRs) and similar Electro-mechanical offshore systems for Oceaneering. Duties And Responsibilities Assist in design, development, run and report on qualification tests for Siemens based control equipment. Assist in development of the block diagrams / layout drawings prepared by Drafters for mechanical, electrical, network, control etc. Should be able to work on Siemens S7-1500F (Failsafe PLC) / S7-1200F, ET 200SP / ET 200MP (Distributed I/O), Siemens Comfort Panel / Unified Comfort Panel (HMI), Sinamics S120 / G120 (Motion Drives), Scalance X (Industrial Switches), TIA Portal (Totally Integrated Automation), WinCC Advanced / WinCC Professional (SCADA & HMI Development), Siemens Industrial Edge / MindSphere (Data Analytics & Cloud), OPC UA in TIA Portal / SIMATIC NET (OPC Communications), PROFINET / PROFIsafe / PROFIdrive (Siemens Communication & safety standards) and various industry standards in safety and high-performance HMI. Coordinate project deliveries and schedules with the Automation & Control teams globally Select suitable connectors, actuators, sensors, computational platforms, protection switch gear and other elements of details system design. Coordinate project deliveries and schedules with the Automation & Control teams globally. Iteratively develop proof-of-concept implementations, prototypes and demos to fine-tune technologies to practical, state of the art systems Develop an awareness of modern Electro-mechanical systems and design alternatives Learn and apply knowledge of relevant design standards and best practices Prepare reports and presentations on the status of the design and development process for discussion with stakeholders. Perform all other duties as requested, directed or assigned Keep abreast of industry trends and issues. Demonstrates high level of initiative to accomplish individual objectives assigned as well as team goals. Work towards individual goals aligned with department and organizational objectives. Comply to organizational HR policies and procedures. Understand and adhere to organizational HSE policies and practices. Qualifications REQUIRED Graduation (Bachelor degree) in Instrumentation Engineering, or Electrical Engineering, or Electronics & Communication or equivalent degree DESIRED Knowledge of Siemens Control System Software and Hardware Exposure of working on various network protocols viz. EtherNet, ControlNet etc. Experience in C and/or Python Programming Good communication skills. Must be fluent in the English language. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Hands on experience in MATLAB/SIMULINK and/or any other simulation tool would be an advantage. Knowledge in Electro-Mechanical Systems and CAD drawings would be an advantage. Strong background in mathematics and/or statistics is highly desirable. Knowledge, Skills, Abilities, And Other Characteristics An individual should demonstrate following competencies & qualities to be able to perform this role successfully: Communication skills Teamwork & Interpersonal skills Analytical, problem solving & decision making skills Organizing & planning skills Mentoring skills Leadership abilities How To Apply Oceaneering’s policy is to provide equal employment opportunity to all applicants. How To Apply Regular full-time employees who apply will be considered along with external candidates. Employees with less than six months with their current position are not eligible to apply for job postings. Please discuss your interest in the position with your current manager/supervisor prior to submitting your completed application. It is highly recommended to apply through the PeopleSoft or Oceanet portals. How To Apply In addition, we make a priority of providing learning and development opportunities to enable employees to achieve their potential and take charge of their future. As well as developing employees in a specific role, we are committed to lifelong learning and ongoing education, including developing people skills and identifying future supervisors and managers. Every month, hundreds of employees are provided training, including HSE awareness, apprenticeships, entry and advanced level technical courses, management development seminars, and leadership and supervisory training. We have a strong ethos of internal promotion. We can offer long-term employment and career advancement across countries and continents. Working at Oceaneering means that if you have the ability, drive, and ambition to take charge of your future-you will be supported to do so and the possibilities are endless.

About Excel-Par Electronics We are a leading manufacturer of high-quality magnetic components, producing millions of transformers and inductors for critical industries like metering, medical, and defence. Our state-of-the-art facility in Mysuru is built on a foundation of quality, precision, and innovation. We are looking for a skilled and proactive Automation Maintenance Engineers to ensure the seamless operation of our sophisticated automated manufacturing and testing lines. Your Role and Impact Leading the Automation Team at Excel-Par Electronics, you will be the technical cornerstone for our advanced production machinery. You will manage a team of Automation Engineers maintaining the intricate, high-speed automated systems that are the backbone of our manufacturing capability. The team's primary mission is to maximise machine uptime, enhance operational efficiency, and drive the continuous improvement of our automated processes, directly impacting our ability to deliver quality components daily. What You'll Do: Key Responsibilities Leadership & Team Management: Lead, mentor, and develop a high-performing team of automation engineers and technicians. Define clear roles and responsibilities, set strategic goals, and manage team performance to foster a culture of accountability and continuous technical growth. Promote a world-class safety culture, ensuring strict adherence to all safety procedures. Operational & Maintenance Strategy: Develop and execute a comprehensive maintenance strategy for all automated production machinery, including our extensive lines of automatic toroidal winders, CNC-controlled linear winders, and robotic soldering systems. Implement and oversee robust Preventive and Predictive Maintenance programs to maximize equipment uptime and reliability. Utilize a CMMS for maintenance planning, scheduling, and spare parts inventory management. Own and drive key performance indicators (KPIs) such as MTTR, MTBF, and Overall Equipment Effectiveness (OEE). Technical & Project Management: Serve as the subject matter expert on advanced automation systems, including PLCs (Siemens, Mitsubishi), SCADA, robotics, servo drives, and machine vision. Lead complex troubleshooting efforts and root cause analysis (RCA) for critical equipment failures, implementing effective long-term solutions. Manage the full lifecycle of automation projects, including upgrades and new installations, from budget and timeline management to vendor coordination and successful commissioning. Continuous Improvement & Digitalization: Champion continuous improvement initiatives using Lean and Total Productive Maintenance (TPM) methodologies like 5S and Kaizen. Lead the integration of Industry 4.0 and smart maintenance tools for real-time monitoring and predictive diagnostics. Collaborate with cross-functional teams (Production, Quality, and Engineering) to align maintenance activities with broader business objectives and drive process optimization. Safety & Compliance: Enforce all safety standards and procedures, including Lockout/Tagout (LOTO), machine guarding, and risk assessments. Ensure all automation equipment and processes are compliant with industry standards (e.g., OSHA, NFPA 70E, ISO 13849) and are prepared for internal and external audits. What You'll Bring: Qualifications & Experience Education: A Bachelor's or Master's degree in Automation, Mechatronics, Electrical, or Mechanical Engineering is required. Experience: 7 to 10 years of progressive experience in automation maintenance within a manufacturing environment, with a minimum of 2 to 3 years in a proven leadership or managerial role. Managerial Skills: Demonstrated ability in team leadership, project management, and budget coordination. Technical Expertise: Deep knowledge of PLC systems (Siemens, Xinje, Mitsubishi), HMI/SCADA, and industrial communication protocols. Hands-on experience with servo drives, VFDs, robotics, and safety circuits. Preferred Certifications: CMRP/CMRT, PMP, PLC Programming Certification, Lean Six Sigma Green Belt, and safety certifications like OSHA or NFPA 70E. Why Join Excel-Par Electronics? Strategic Impact: This is more than a maintenance role; you will shape the technological future and operational strategy of a leading manufacturing facility. Leadership Opportunity: Lead and mentor a skilled team, building a Centre of Excellence for automation maintenance. Innovation at the Core: Be empowered to explore and implement cutting-edge Industry 4.0 solutions, driving our digital transformation. A Culture of Excellence: Join a stable, growing company that values quality, sustainability, and the professional growth of its people. Non-negotiables Ability to work in shifts and any day of the week depending on maintenance requirements. Follow company policies.

Who We Are TAPI is the leading international supplier of active pharmaceutical ingredients (APIs). With the industry's broadest portfolio including over 350 API products. We are the go-to global supplier for APIs, supporting 80% of top 50 global pharmaceutical companies. We are proud of our reliable history in the generic API industry dating back over 80 years, and the fact we are considered to be one of the most trusted API suppliers, these enable TAPI to lead the industry, based on our experience, expertise, technologies, and exceptional customer service. Our employees are at the core of our success. Our Headquartered is in Israel, TAPI employs more than 4,000 professionals at 14 sites worldwide. Our state-of-the-art production facilities are located in Italy, Hungary, the Czech Republic, Croatia, Israel, Mexico and India. Our significant ongoing investment in R&D generates a steady flow of APIs, enabling timely introduction of new products to market. How You’ll Spend Your Day Preparation of Instrumentation engineering deliverables including Specifications, Instrument Datasheets, URS, BOQ, control philosophy, PLC I/O’s detailing, Logic Diagrams, calibration schedules, PM schedules etc. Provide inputs and review of engineering drawings including Instrument Location Plans, Cable & JB Schedules, Cable Routing Layouts, Instrument Installation Details, Process / Pneumatic Hook-Ups, Interconnection Diagrams, Loop Diagrams, Instrument Loop Diagrams Hands on experience of detail engineering of field Instrumentation in modification nature project & experience of calibration of field instrument (i.e. Temperature, Pressure) with master instruments and shall review calibration executed by technician Execute, supervise & support to technician team in day-to-day instrumentation maintenance activity. Prepare of spare need identification plan and support to Instrumentation Manager for spare management & fix repeated service call with route cause analysis and ensure maintenance activity right in first time with fast response Hands on experience of HART protocol based Instruments & transmitters & experience on working with DCS/PLC based SCADA System, HMI, DAS-Rockwell/Siemens/Emerson (i.e. loop testing, fault identification, data backup & migration activity etc.) Hands on experience on safety sensor or leak detection system (i.e. Hydrogen/Ammonia/VOC) etc., and execute time-to-time calibration/bump test with experience on EHS critical instrument/system working & maintenance Execute scheduled in house PM calls and Coordination with external Service Engineer for scheduled AMC PM calls or breakdown calls Having good knowledge of pharma documentation shall arrange to execute related documentation (i.e. CCM initiation, validation, qualification, testing, calibration etc.) Understanding and ensuring quality compliance with cGMP, GDP, GEP, GAMP, 21 CFR part 11 & EHS compliances i.e. IP rating, Intrinsic safe instrumentation, FLP, hazardous area classification, zone classification, FLP rating. Related operational PPEs. Work permit system System, Job safety analysis, Risk assessment. LOTTO procedure Good in computer skills and preparation of daily/monthly excel reports, work power point presentation and using of industrial software i.e. Priority/SAP/EAM etc. Your Experience And Qualifications BE/B.Tech - Electronics & Instrumentation/Electronics/Instrumentation Experience - 5+ year required Already Working @TEVA? If you are a current Teva employee, please apply using the internal career site available on "Employee Central". By doing so, your application will be treated with priority. You will also be able to see opportunities that are open exclusively to Teva employees. Use the following link to search and apply: Internal Career Site The internal career site is available from your home network as well. If you have trouble accessing your EC account, please contact your local HR/IT partner. Teva’s Equal Employment Opportunity Commitment Teva Pharmaceuticals is committed to equal opportunity in employment. It is Teva's global policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, sexual orientation, gender identity or expression, ancestry, veteran status, national or ethnic origin or any other legally recognized status entitled to protection under applicable laws. We are committed to a diverse and inclusive workplace for all. If you are contacted for a job opportunity, please advise us of any accommodations needed to support you throughout the recruitment and selection process. All accommodation information provided will be treated as confidential and used only for the purpose of providing an accessible candidate experience. Teva Pharmaceuticals is committed to equal opportunity in employment. It is Teva's policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

We at Smart Infrastructure Division in Siemens Ltd. is one of the top tier global suppliers of products, systems, solutions, and services for the efficient, reliable, and intelligent transmission and distribution of electrical power. As the trusted partner for the development and extension of an efficient and reliable power infrastructure that industry and the portfolio they need. JOIN US! WE MAKE REAL WHAT MATTERS. THIS IS YOUR ROLE. Job Summary: As an OT Development Engineer, you will be responsible for the complete development & execution of Operational Technology (OT) systems in the Special Purpose Machine (SPM) group. This role focuses on software development, industrial automation integration, and IIoT connectivity for custom-built machines. You will design, develop, standardize, and implement PLC/HMI/SCADA solutions and integrate OT systems with IT platforms using tools like Node-RED and MindSphere. The position demands strong technical execution, innovation in OT-IT convergence, and continuous improvement in deployment practices. Key Responsibilities: OT Software Development & Execution Develop and deploy PLC, HMI, and SCADA software for industrial automation systems. Work on Siemens platforms including TIA Portal, S7-1200/1500, WinCC, and SCADA, Motion System configurations. Prepare system-level IO lists, architecture documents, and control flow diagrams. Lead end-to-end commissioning of OT systems at Kalwa and supplier sites. IIoT & IT-OT Integration Integrate OT data and control systems with IT platforms using Node-RED, OPC UA, and industrial gateways. Develop dashboards and data flows for real-time monitoring and control using tools like Node-RED. Implement machine connectivity and analytics via Siemens MindSphere or equivalent industrial IoT platforms. Enable remote diagnostics, condition monitoring, and data logging across machine setups. System Integration & Connectivity Interface third-party automation components such as servo drives, robotics (industrial/cobot), vision systems, laser markers, label printers, and more. Work with protocols like PROFINET, PROFIBUS, TCP/IP, RS-232, and Modbus. Assist in integrating pneumatics, hydraulics, and motion control with OT logic and diagnostics. Ensure cyber-secure network design for OT components within broader enterprise infrastructure. Standardization & Continuous Improvement Develop standardized OT code libraries and HMI templates for scalable reuse. Maintain consistency in OT software across SPM platforms to increase efficiency and reduce errors. Propose and implement improvements in development workflows, commissioning practices, and data integration methods. Qualifications & Technical Skills: Bachelor’s degree in Electronics, Instrumentation, Mechatronics, Electrical, or related fields. 8+ years of experience in OT software development and industrial automation systems. Proficiency in Siemens automation (S7-1200/1500, TIA Portal, WinCC) and industrial integration. Strong working knowledge of Node-RED, MindSphere, OPC UA, and IIoT frameworks. Hands-on experience with integrating industrial robots, collaborative robots (cobots), and vision systems. Familiarity with EPLAN for reviewing electrical integration with OT. Understanding of network architectures, IT-OT gateways, and data protocols (MQTT, HTTP, REST APIs). Practical knowledge of interfacing with pneumatic, hydraulic, and motion control systems. Personal Attributes: Strong problem-solving mindset with a proactive approach to technology adoption. Passionate about digital transformation in industrial environments. Self-motivated and able to independently manage development and commissioning tasks. WE’VE GOT QUITE A LOT TO OFFER, HOW ABOUT YOU? We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we encourage applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and creativity and help us shape tomorrow.

https://forms.gle/f4tfpsApJq5BgDPi6 Job Title: Industrial Automation Engineer . Location: Panipat Qualification: Diploma / B..tech in Electrical Eng . Years of Experience: 2-4 yrs Salary Package: 2 LPA- 4 LPA ( negotiable ) Required Skills: ● Installation, Programming and commissioning of Ac Motor drives , Servo Drives , PLC , HMI, SCADA, Process controller etc . ● Must be able to understand the machine procedure and rectify the fault in the machine.. ● Experience on brands i.e. ( Delta , Siemens , Abb, Siemens, Yaskawa,INVT , Mitsubishi. Job Responsibility: ● Design, develop, test, and implement industrial automation solutions using DCS, SCADA, and other relevant technologies. ● Collaborate with cross-functional teams to identify process improvements and optimize production efficiency. ● Troubleshoot issues related to factory automation systems and resolve problems promptly. ● Ensure compliance with industry standards and regulations in the design and implementation of industrial automation projects. Interested Candidates can call and share their updated resume on WhatsApp:- Ph. No. :- 9996345210 E-mail :- hr.mavenjobs@gmail.com https://forms.gle/f4tfpsApJq5BgDPi6 Job Type: Full-time Pay: ₹200,000.00 - ₹400,000.00 per month Work Location: In person

Job Summary: We are seeking a skilled and detail-oriented PLC Programmer to design, develop, test, and troubleshoot programmable logic controller (PLC) systems for our automation projects. The ideal candidate will have experience with industrial automation equipment and will be responsible for ensuring seamless integration between hardware and software in custom machinery and control systems. Key Responsibilities: Design and develop PLC programs for automation equipment (e.g., SPMs, assembly lines, laser machines). Configure, program, and troubleshoot HMI (Human-Machine Interface) systems. Read and interpret electrical schematics, control panel layouts, and technical documents. Test and debug control systems both in-house and at customer sites. Integrate sensors, actuators, and field devices into PLC systems. Support installation, commissioning, and customer training on-site. Collaborate with mechanical, electrical, and design teams to develop control logic. Modify and improve existing programs for system upgrades or efficiency improvements. Ensure adherence to safety standards and quality guidelines. Qualifications: Diploma/Bachelor’s degree in Electrical, Electronics, Mechatronics, or a related field. 2–10 years of experience in PLC programming and industrial automation. Proficiency in programming PLCs (Siemens, Allen Bradley, Mitsubishi, Omron, etc.). Experience with SCADA/HMI development software. Strong knowledge of industrial communication protocols (Modbus, Profibus, Ethernet/IP). Hands-on experience with debugging tools and field wiring. Ability to work independently and in a team-oriented environment. Willingness to travel for commissioning and service support. Preferred Skills: Experience in special purpose machines (SPMs), laser marking, leak testing, or vision inspection systems. Familiarity with servo systems and motion controllers. Strong troubleshooting and analytical skills. Ability to manage multiple projects and meet deadlines. Job Type: Full-time Pay: ₹35,000.00 - ₹60,000.00 per month Application Question(s): How many Years of Experience do you have on Mitsubishi & SPM? How many years of experience do you have as a PLC Programmer? What is your Current CTC? Tell me two dates for your interview? Work Location: In person

Designation: Sr. Controls Application Engineer Experience Level: 6–10 Years Job Summary: We are seeking a highly skilled and experienced Controls Application Engineer to lead the pre-engineering and design and estimation of automation solutions in warehouse and intralogistics environments. The ideal candidate will have a strong background in PLC/HMI programming, material handling equipment, and conveyor systems, with a deep understanding of warehouse control systems (WCS) and integration with higher-level systems (WMS, ERP). Key Responsibilities: Lead the pre-engineering and design and estimation of automation solutions for automated warehouse solutions, including conveyors, AS/RS, sorters, and robotics. Knowledge on Programming of PLCs and HMIs (primarily Siemens TIA Portal or Rockwell Studio 5000) for custom material handling systems. Knowledge on design electrical schematics and panel layouts using AutoCAD Electrical or EPLAN. Coordinate field I/O, motor controls, VFDs, and safety circuits in compliance with global standards (UL508A, IEC). Work closely with mechanical application and software teams to ensure seamless understanding on the projects and alignment with customer requirements. Knowledge on complete project implementation processes and execution processes . Develop and maintain technical documentation including Functional Design Specifications , Network Architectures and Process Flows . Serve as a technical mentor for junior engineers and support project managers during the proposal and execution phases. Having good capability in building relationship with vendors and develop new vendors. Qualifications: Bachelor's degree in engineering (or related degree) with 4 – 6 years of relevant practical business experience. Strong electrical/controls design aptitude and basic knowledge of mechanical. Excellent technical problem-solving capability (hardware, controls) Demonstrated leadership skills. Enjoys the Material Handling and Automation business environment.

Donaldson is committed to solving the world’s most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. Key Responsibilities Machine Uptime Improvement (%) - Support to ensure maximum availability of machines for production and improve it over YOY, Perform root cause analysis for repeated breakdowns and implement corrective measures. MTTR & MTBF Improvement (Min) - Support to reduce MTTR by following standard troubleshooting practices and using proper tools, Support to improve MTBF by identifying recurring issues and suggesting permanent fixes, Maintain logs of repair time vs downtime for continuous benchmarking. Preventive maintenance plan adherence (%) - Strictly follow preventive maintenance schedules coordinating with planning teams, Achieve high compliance (% PM completed on time vs planned), Document and report PM findings, and escalate any potential risks. Spare Parts Follow-up and Coordination Zero unsafe acts during maintenance - Ensure zero accidents, near misses, or unsafe practices, Continuous Improvement Initiatives Sustainability project executions - Support projects related to energy saving, water conservation, waste reduction, etc. Breakdown Frequency Reduction (%) → Measure and reduce repeated failures. Education Qualification: Diploma in Electrical Technical Competence & Skills: Troubleshooting of Electrical Equipment- VFD, Switches, breaker, relays etc. Preventive Electrical Maintenance Understanding of Electrical Drawings Familiarity with PLC and HMI Systems Spare Parts & Inventory Support Maintenance Reporting & Documentation Relevant Experience: 7-10 years working experience maintenance in auto industries Others (% of travel, language, etc.): Hindi (read/write/speak) English (read/write) Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to talentacquisition@donaldson.com to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Just Engineering is a leading automation training provider company delivering PLC/SCADA Automation training from its state-of the-art training centre which is centrally located at JM Road, Deccan, Pune. We are currently looking for PLC SCADA Automation Trainer as a faculty having excellent communication skills in English, Hindi and Marathi with a pleasant personality. The following skills will be required to be successful in this role: Job Description: Technical Knowledge of Automation (PLC, SCADA, HMI, Electrical, Electronics & VFD’s, Electro Hydraulic & Pneumatic) Conduct training on Industrial Automation like PLC,SCADA,HMI for students and working professionals Classroom teaching and hands on practice should be given to students Knowledge of E-Plan & Auto-Cad software Design, engineering and development of PLC ,SCADA, HMI projects An ability to manage the batches and training centre activities Should be able to work closely with placement officer and students to monitor and help in placement activity Should be able to deliver seminar presentations to corporate and college students Proficient in using MS Office and preparing power point presentations for delivering lectures. Required Experience, Skills and Qualifications: Qualification: BE / B.Tech / MSc in Electrical / Electronics / Electronics and Telecommunication / Electrical / Instrumentation / Automation and Robotics from a Recognized University Experience: 1-3 yrs of experience in Automation Training / In Automation Projects / Fresher having passion in teaching Highlights of the position : Employment with leading MNC training provider in Automation Excellent Career Prospectus and Opportunities Immediate Start Salary commensurate with level of experience Job Type: Full-time Kindly share your resume or call on 7028953079 to discuss job opportunity.

IMEA (India, Middle East, Africa) India LIXIL INDIA PVT LTD Employee Assignment Not remote Full Time 1 September 2025 JOB DESCRIPTION – Senior Engineer– Electrical Maintenance Purpose: Maintain all the Electrical zones & Utilities- HT Yard (Substation-33KV/415Volts), 33KV HT Breakers- Out Door Type, Power Transformer – with Minimum rating of 2000 KVA ( 33/0.433 KV), LT breakers, APFCR Panel with Capacitor Bank of with Minimum Capacity- 800 KVAR, Online Industrial UPS with Battery Bank with Minimum Capacity – 400KVA, DG Set- with minimum Capacity -1010 KVA, ATS & AMF, LT Motors & Starters, Process Auto Control Panels, Panel Cooling system, Automatic Lighting System, Screw Air Compressors, Air Dryers, Screw Chiller, Auto Fire Sensing & Alarm System, Material handling & lifting Equipment’s (Like-Fork lifter, EOT crane, JIB crane, Electric hoist & Automobiles), Water Treatment Plants, Industrial Air Conditioning & Refrigeration System, Industrial gas storage & pumping system ( LPG & PNG), Process Automation & Instrumentation- Like PLC, HMI, VFD, Servo Drives & Motors ( SIEMENS, OMRON, Allen Bradley, Mitsubishi, Yaskawa, Delta & Schneider), Transducers, Safety Control & Measuring Instruments, Energy Saving Projects and Process Equipment’s Like – Tunnel Kiln, Ball mills, Auto spraying system, Motorized conveyors & agitators, Dryers & Furnace. Qualification: BE/B. Tech – Electrical & Electronics with Electrical Supervisor license Up to 33KV and AutoCAD proficiency (AutoCAD, SolidWorks) Experience: Required Minimum 7-9 years specific on hand work experience- advantage if the experience in same business line/continuous process industry like – Sanitaryware/ceramic field/FMCG/Automobile/Cement/Oil & Gas/Steel/Paper. General Requirements Shall be responsible for two primary functions: Equipment Maintenance and Co-ordination & Implementation of TPM system. Managing employees- Recruiting, onboarding, training, and managing electricians, developing systems- Developing and maintaining electrical systems, Planning and scheduling- work schedules, and assignments. Ensuring compliance- Ensuring compliance with electrical codes and safety standards, managing projects- the design, installation, and supply of electrical systems, managing budgets- Managing project budgets and ensuring financial objectives are met, managing records: Maintaining accurate records of electrical plans and documentation. Improving operations- Developing and improving departmental policies and procedures, and suggesting ways to increase revenues and efficiency, resolving issues- Investigating and resolving complaints, Communicating- Communicating job expectations and leading weekly team meetings. Accomplish department objectives by orienting, training, assigning, scheduling, coaching, counselling, disciplining team, communicating job expectations, planning, monitoring & reviewing job contributions and enforcing policies & procedures. Achieve objectives by contributing electrical engineering information, technical support recommendation to strategic plans, reviews, projects, preparing & completing action plans by implementing production, productivity & quality standards, resolving problems, completing audits, identifying trends & determining improvements. Perform maintenance management by supervising maintenance personnel and establishing priorities in maintenance schedules. Taking decision for Predictive & corrective maintenance of plant equipment based on performance. Meet department financial objectives by forecasting requirements, preparing an annual budget, scheduling expenditures, analysing variances & initiating corrective actions. Develop strategic electrical engineering plans by studying operational plans, existing conditions, determining needs to accomplish operational plans, mapping solutions, updating modifying requirements & solutions and preparing cost estimates & budgets. Assists with allocation, budgeting, resource planning & scheduling. Maintain approvals and assets, utilities, facility, parts inventory, monitoring purchase orders, invoice approvals, and manage the department budget. Monitor and control maintenance costs. Need to work on specific consumption & utilization. Plan electrical projects by determining specifications, establishing installation schedules, integrating requirements with process & electrical designs, verifying requirements & updating cost estimates and completes electrical projects by supervising installations & resolving design issues. Complete engineering projects on time and at or under budget. Timely Perform Performance Evaluations on direct reports and Verify Performance Evaluations are being performed on technical work force. Drive the Maintenance & Reliability initiative focused on Preventive & Predictive Maintenance, not reactive and maintain work order & inventory management. Maintain electrical systems by establishing & enforcing timely maintenance as per the schedules. Adherence of preventive maintenance schedule. Carry out routine maintenance work and respond to equipment faults and diagnose breakdown problems. Identification of obsolete & upgrade with latest or improved technology. Design, update & archiving the electrical Drawings, documents, necessary for the documentation of projects, programs and operator interface software. Broad-based, hands-on knowledge and experience with various types of instrument and electrical systems, equipment and software. Ability to operate & update data in Ariba, SAP, MS word, MS excel, MS power point, Google sheets, AutoCAD & SolidWorks etc and understand & develop drawings in AutoCAD & SolidWorks. Maintain safe & healthy work environment by establishing, following, enforcing standards & procedures and complying with codes & legal regulations. Statutory - Complying all kind of legal & statutory requirements related EHS for electrical department. Design and specify new equipment installations undertaken by the business unit. Prepare project cost estimates and capital appropriation requests justifying proposed spending with economic returns meeting company standards. Coordinate with production, maintenance, purchasing departments while preforming engineering activities. Must be able to work a flexible schedule. Failure Analysis of all Electrical equipment’s failures and compliance as per action plans, calculate the MTTR & MTBF. Provide process engineering and troubleshooting support to production, utilities as necessary to meet all the production commitments. Contributes to production flow by minimizing downtime due to equipment/parts failures. Good communication, analytical and troubleshooting skills. Willingness to work in a team-based environment and a commitment to continuous learning and improvement. Ensure TPM, KYT, TBT, KAIZEN, HAICHIBAN, 5S, Critical Six, OHSAS, ISO, QMS, EMS and Behaviour Based Safety. Typical Responsibilities O&M - Zero Down Time & 100 % uptime for all the electrical Equipment’s, Utilities and Installations (Including 33KV SS/HT Yard, PTR, all the HT & LT breakers, panels & relay control Panels, Safety, control & Protection circuits, LAS system, UPS’s and DG sets). Basic Knowledge in electrical & unit operations. Knowledge of working on HT & LT panels. Responsible for the day-to-day electrical engineering improvements and maintenance pertaining to the department while directing the activity of Electrical maintenance personnel for the safe, efficient operation of the plant Responsible for 33KV line maintenance for plant operations including external & internal. Direct the repair, maintenance, rearrangement, modification and installation of equipment. Design electrical & electronic control and communication systems for production equipment. Troubleshoot electrical and instrumentation maintenance issues and complete appropriate documentation. Evaluate all data to determine maintenance schedules to optimize equipment availability. Ensure to 100% Safe & Reliable electrical operations with required data & records around the clock (All the shifts). Ensure 100% Availability & Readiness of safe & reliable electrical installations for all the Process Equipment’s & Utilities (Including material handling & lifting equipment’s) - Zero Down Time & 100 % uptime. Ensure 100% availability of all the records & drawings at appropriate storage & designated place with display in ABC category. Need to Adhere, Ensure & Maintain 100% compliance as per the statutory & legal requirements, ISO, Company & Government policy, rules & regulations with all the required documents and timely submission with acknowledgement – including periodical testing, inspection & calibration and interacting with all the Government Officials to comply the Organization Statutory & Regulatory Compliance. PM/CBM Compliance to 100% RCA to be carried out for major & repetitive failures with appropriate corrective action and preventive actions. Adhere, Ensure, Maintain & timely completion of all the maintenance schedules for reliable maintenance – Need to review & update periodically as per the requirement & improvements to reduce maintenance cost & time and Only Proactive maintenance & approach. Minimization of Inventory & cost optimization by Indigenous Development of Spares. Development cost estimations, helps determine affordable & reliable material sources Reduction of Electricity & Maintenance- Identification, Designing & Implementation of Various Cost Reduction, Energy Savings, Reliability & Continuous Improvement Projects. Timely execution of AMC for all the Critical utilities as per the schedule. Timely execution & completion of all the approved projects & new equipment’s as per the requirement. Team Improvement, Building & Management – Skill matrix, Knowledge & Information sharing, clear communication, preparation of training calendar & appropriate training to all the team members. Scheduling of outsource requirements with appropriate justification & prior approvals. Cost Optimization with Budget & Control Measures.

Job description Position: Engineer - Sales (Automation) Location: Bangalore Language: Proficiency in English & Kannada Reporting to: Manager – Sales Education: Diploma/BE/B.Tech in EEE, ECE, Mechatronics, E&I, and Robotics & Automation. Experience: 3–6 years in sales of Automation or similar industrial automation products. About the Role: We are looking for a passionate and result-driven Engineer – Sales to join our dynamic team. The ideal candidate should have strong experience in selling Automation Products (PLC, SCADA, HMI, VFD, Motion, Safety products, etc.) within the industrial sector . If you excel in building relationships, understanding customer needs, and driving sales growth, we want to hear from you. Key Responsibilities Responsible for Rockwell Automation Product Sales of PLC, SCADA HMI, VFD, Motion, Safety products Etc. In the INDUSTRIAL SECTORS. Expertise in Industry Knowledge, Application Knowledge, Process Business Drivers (Understanding of needs of Process Solutions customers). Strong skills in Sales Fundamentals (listening, analyzing, lead qualifying, negotiating, Prospecting & New Customer Development. Develop and execute comprehensive sales plans to achieve business growth in assigned territories, accounts, or industries. Identify new business opportunities with both active and dormant customers. Analyze and understand customer needs, leveraging Multivista resources to provide tailored solutions. Maintain an active and healthy sales funnel to meet or exceed sales targets. Undertake daily sales calls to strengthen customer relationships and generate leads. Qualify, follow up, and close sales opportunities effectively. Drive value-based and customer-centric selling strategies. Skills Required Strong communication and presentation abilities. Proven customer relationship-building skills. Pre-sales and team coordination experience. Ability to analyze market trends and strategies. MS Office proficiency & Knowledge of SAP (added advantage). To know about our Company, please visit our website: www.multivistaglobal.com LinkedIn Page: https://www.linkedin.com/company/multivista-global-limited/

Job Purpose Job Purpose Description Candidate should have experience of 3-5 years and should be diploma in Electrical/ Instrumentation and Electronic Engineers who has experience in manufacturing industry preferably from Aluminium Extrusion. Candidate must have experience in PLC, HMI, Drives Programming and Troubleshooting. They must have knowldge of Hydraulic, Pneumatic Equipments, Anodising and Powder Coating plants. Should have exposure of 5'S, Kaizen, Autonomus maintenance and Energy Conservation.

Job Category: Engineering Job Type: Full Time Job Location: Mumbai On-site Pune Designation – Graphic Design Engineer Location – Pune and Mumbai Salary – 3.0 LPA To 6 LPA Gender – Both Experience – 6 Months To 5 Years Job timing – 9 AM TO 6 PM Qualification – A bachelor’s degree in B.Tech/B.E. with a specialization in Electrical, Electronics, or Electronics & Communication. Job Description(JD) – We are seeking a highly professional and motivated Graphic Design Engineer-GDS to join our dynamic team in our India office. The successful candidate will be a pivotal team member, driving the development of graphics for Building Management System (BMS) global projects, adhering to customer or account-specific standards. Key Responsibilities – Execute graphic development with precision for BMS projects. – Collaborate diligently with the team lead on HMI SCADA graphic development projects. – Efficiently handle first-level escalations related to the graphics projects. – Adhere strictly to set processes and maintain high-quality standards. – Guarantee on-time delivery of projects to meet and exceed customer satisfaction. Apply for this position Full Name * Email * Phone * Cover Letter * Upload CV/Resume *Allowed Type(s): .pdf, .doc, .docx By using this form you agree with the storage and handling of your data by this website. *

Location: Bengaluru, Karnataka, India Job ID: R0100148 Date Posted: 2025-08-18 Company Name: HITACHI ENERGY INDIA LIMITED Profession (Job Category): Engineering & Science Job Schedule: Full time Remote: No Job Description: The opportunity Project Engineering focuses on designing, communicating, and implementing an operational plan for completing an engineering-based project including: Preparing designs, project controls and specifications, schedules, cost estimates, production, transportation, installation, testing and/or commissioning of new infrastructure, facilities, equipment, etc. Monitoring progress and performance against the project plan; taking action to resolve operational problems and minimize delays. Identifying, developing, and gathering the resources necessary to complete the project. May include preparing engineering standards, designs and work specifications; developing project schedules, budgets and forecasts; and selecting materials, equipment, project staff, and external contractors A Senior Professional applies advanced knowledge of job area typically obtained through advanced education and work experience. Responsibilities may include: Managing projects / processes, working independently with limited supervision. Coaching and reviewing the work of lower level professionals. Problems faced are difficult and sometimes complex. How you’ll make an impact Create Base Design with all necessary Concepts. Verify the implemented Base Design in the Detail Design (Bay and Station level Engineering). Technical Coordination and Lead for the project team during the project execution phase (Detail Design, Manufacturing, Testing, Commissioning). Technical co-ordination for FAT. Responsible to ensure that specification is fulfilled in respect of the technical offer. Contribute to the improvement of the Net-margin including upsales, etc. Ensure project execution is carried out fulfilling internal processes and guidelines. Ensure experience and learnings during the project execution is shared with colleagues within the same unit (Sales, B&P, PMs, Engineering, Testing, Commissioning). Project execution for complex projects (E.g. Retrofit, Fast Track Projects, Turn Key Projects, etc.) Contribute to identify market compliant, low risk technical solution and efficient project setup (E.g. Organization, Communication, Sub-supplier). Should have knowledge on Generator, Line, Transformer, Busbar protection relays and Bay control units. Should have worked on IEDs configuration tools like PCM600, DIGSI, Agile studio, Easergy Studio, etc., Should have worked on MicroSCADA for SAS & DMS, Gateway and Remote HMI applications etc., Work experience on 800xA for HMI, Load shedding, Generator shedding application etc., will be added advantage Should have working knowledge of Protocols such as IEC61850, Modbus, IEC-104, IEC-101, DLMS etc., Should have working knowledge on Cyber Security for designing Substation Automation/Network control centers.) Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business Your background Candidate should have BE/B.Tech - Electrical or Electronics Engineering with 8 – 12 years of relevant experience. Proficiency in both spoken & written English language is required Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Position: Engineer - Sales (Automation) Location: Chennai Language: Proficiency in English and Tamil Education: Diploma/BE/B.Tech in EEE, ECE, Mechatronics, E&I and Robotics & Automation. Experience: 3 - 6 years in sales of Automation or similar industrial automation products. About the Role: We are looking for a passionate and result-driven Engineer – Sales to join our dynamic team. The ideal candidate should have strong experience in selling Automation Products (PLC, SCADA, HMI, VFD, Motion, Safety products, etc.) within the industrial sector. If you excel in building relationships, understanding customer needs, and driving sales growth, we want to hear from you. Key Responsibilities Responsible for Rockwell Automation Product Sales of PLC, SCADA HMI, VFD, Motion, Safety products, Etc. In the INDUSTRIAL SECTORS. Expertise in Industry Knowledge, Application Knowledge, Process Business Drivers (Understanding of needs of Process Solutions customers). Strong skills in Sales Fundamentals (listening, analyzing, lead qualifying, negotiating, Prospecting & New Customer Development. Develop and execute comprehensive sales plans to achieve business growth in assigned territories, accounts, or industries. Identify new business opportunities with both active and dormant customers. Analyze and understand customer needs, leveraging Multivista resources to provide tailored solutions. Maintain an active and healthy sales funnel to meet or exceed sales targets. Undertake daily sales calls to strengthen customer relationships and generate leads. Qualify, follow up, and close sales opportunities effectively. Drive value-based and customer-centric selling strategies. Skills Required Strong communication and presentation abilities. Proven customer relationship-building skills. Pre-sales and team coordination experience. Ability to analyze market trends and strategies. MS Office proficiency & Knowledge of SAP (added advantage). To know about our Company, please visit our website: www.multivistaglobal.com

Job Type - On SITE Job (Involves Travel across India) Job Location - Thirumudivakkam, Chennai - 600044 Salary Range / Month - Rs.30,000/- to 40,000/- Minimum Education - Diploma in Electrical / Electronics / Communications Engg. Experience Mandate - Experienced only Minimum Experience - 3+ Years Languages Required - Tamil & English (Must) & Hindi (Basic Level) Age Range - 23 to 40 Years Preferred Candidates from - within Tamilnadu Gender - Male SkillSets Required - Rockwell PLC Programming, FactoryTalk SCADA, HMI, Networking, Data Communications Job Details - Looking for PLC Programmer with 5+ Years Experience in Rockwell PLC Programming, FactoryTalk SCADA, HMI, Networking, Data Communications, Project Installation & Commissioning at On SITE Locations across India. Type of Interview - In Person at Office Location

Job Description: We are looking a Male Candidate for the profile of Sales Engineer. Candidate is expected have basic knowledge of PLC, HMI, SCADA, Drives & Electronics. Candidate should have excellent communication skill dedicated to selling & maintaining an excellent customer service level. Most importantly, a person possessing hands-on attitude rising to the challenges of a competitive market, a self-motivated achiever, who is result oriented person with the ability to work independently and as part of a team. Candidate should have his own Bike and willing to travel. Salary + Allowance + Incentive will be given. Job Responsibilities: • Daily Visits to client • Generating Purchase requirements from existing customers and other prospective sources. • Sending Quotations to Client • Follow-up with customers • MIS reports etc. • Proposal/ Tender submissions • Job Type: Full-time Qualification: • Education: Diploma/ BE /MSC • Field: Electronics/ Instrumentation/ Electrical • Location: Pune. • Freshers with Excellent communication skills can be considered

Designation: PLC / DCS Commissioning Engineer - Control and Automation Academics: Electrical / Electronics / Instrumentation (Diploma / B.E / NTTF) Basic Skill Set: PLC, HMI, SCADA, DCS Prefered Skill Set: PCS7, Siemens Step7, WinCC, TIA, VFD, PROFINET, MODBUS, IEC 61131-3 Programming, IEC 104, IEC 61850, Simocode, VFD JD: Customer site support, FAT, SAT and Commissioning Experience : 3 to 6 Years Domain Knowledge : Power&Energy / Cement / metals and minerals

Company Description ROK AUTOMATION is a leading Automation Service Providing Company with over 8 years of experience in the industry. We specialize in Panel building, PLC programming, SCADA Development, and Process Automation. Our expertise extends to the supply of various automation components such as PLCs, HMIs, VFDs, SCADAs, Servo Drives, Sensors, Industrial Ethernet Switches, and SMPS. Our dedicated team is committed to delivering high-quality automation solutions to enhance efficiency and productivity for our clients. Role Description This is a full-time hybrid role for a PLC Programmer located in Vasai Virar, with some work-from-home flexibility. The PLC Programmer will be responsible for designing, programming, testing, and maintaining PLC systems. Daily tasks include developing and implementing control systems, troubleshooting and diagnosing issues, conducting site visits for system installations, and creating technical documentation. Collaboration with project teams and clients to ensure successful project execution is also required. Qualifications Proficiency in PLC Programming, SCADA Development, and HMI Configuration Experience with Process Automation, Servo Drives, and VFDs Knowledge of Sensors, Industrial Ethernet Switches, and SMPS Strong problem-solving and troubleshooting skills Excellent communication and teamwork abilities Capability to work independently and adapt to a hybrid working environment Bachelor's degree or Diploma in Electrical Engineering, Automation, or related field Prior experience minimum 2years should have expertise in Delta and Mitshubhsi and Phoniex PLC programming.

Greeting from Mecno Automation LLP We are looking for Senior Automation Engineer (4 years minimum experience) specially in Process Automation with 500 above IO's system. Experience in Object oriented programming in PLC. VB Scripting experience. Electrical Knowledge and Electrical Panel rectification experience. - PLC programming (Siemens, Mitsubishi, Delta) - HMI programming (Siemens, Mitsubishi, Delta) - SCADA programming (WinCC or Aveva product) - Basic Electrical experience. - Site commissioning Job Type: Full-time Pay: ₹40,000.00 - ₹55,000.00 per month Benefits: Work from home Ability to commute/relocate: Pimplas, Thane, Maharashtra: Reliably commute or planning to relocate before starting work (Preferred) Experience: PLC Automation: 4 years (Required) SCADA: 2 years (Preferred) Willingness to travel: 75% (Preferred) Work Location: In person

Job Summary: We are seeking a skilled PLC Programmer to design, develop, test, and maintain Programmable Logic Controller (PLC) systems for industrial automation projects. The ideal candidate will have strong experience with PLC programming, HMI development, and integration of automation systems in a manufacturing or industrial setting. Key Responsibilities: Develop and implement PLC programs for automation systems (Siemens, Delta, Mitsubishi, etc.) Design and configure Human-Machine Interfaces (HMI) and SCADA systems. Troubleshoot and debug PLC software and hardware issues on-site and remotely. Read and interpret electrical schematics, P&IDs, and technical drawings. Work with cross-functional teams including electrical, mechanical, and process engineers to ensure seamless integration of automation systems. Test and validate automation systems to ensure they meet functional requirements and safety standards. Document control logic, program changes, and system configurations. Assist in commissioning, start-up, and ongoing support of automation projects. Maintain knowledge of current technologies and industry trends in automation. Qualifications: Bachelor’s degree or diploma in Electrical Engineering, Mechatronics, Automation, or related field. 2+ years of experience in PLC programming and automation (more for senior roles). Proficiency in programming platforms such as Siemens (TIA Portal, S7), Delta (WPLSOFT and IPSOFT), Mitsubishi, etc. Experience with HMI/SCADA software any Make. Knowledge of industrial communication protocols (Ethernet/IP, Modbus, Profibus, OPC). Ability to travel to customer sites for commissioning and support (if required). Strong analytical and problem-solving skills. Excellent documentation and communication skills. Preferred Qualifications (Optional): Experience in robotics or motion control systems.. Familiarity with SCADA system architecture. Hands-on experience with electrical panel design or wiring is a plus. Benefits: Competitive salary Paid leaves and holidays Training and professional development opportunities. Contact us : rokautomation@gmail.com.com Job Type: Full-time Pay: ₹18,000.00 - ₹40,000.00 per month Experience: PLC programming : 2 years (Required) Location: Vasai, Maharashtra (Required) Willingness to travel: 75% (Required) Work Location: In person Expected Start Date: 01/09/2025

IMEA (India, Middle East, Africa) India LIXIL INDIA PVT LTD Employee Assignment Not remote Full Time 1 September 2025 JOB DESCRIPTION – Senior Engineer– Electrical Maintenance Purpose: Maintain all the Electrical zones & Utilities- HT Yard (Substation-33KV/415Volts), 33KV HT Breakers- Out Door Type, Power Transformer – with Minimum rating of 2000 KVA ( 33/0.433 KV), LT breakers, APFCR Panel with Capacitor Bank of with Minimum Capacity- 800 KVAR, Online Industrial UPS with Battery Bank with Minimum Capacity – 400KVA, DG Set- with minimum Capacity -1010 KVA, ATS & AMF, LT Motors & Starters, Process Auto Control Panels, Panel Cooling system, Automatic Lighting System, Screw Air Compressors, Air Dryers, Screw Chiller, Auto Fire Sensing & Alarm System, Material handling & lifting Equipment’s (Like-Fork lifter, EOT crane, JIB crane, Electric hoist & Automobiles), Water Treatment Plants, Industrial Air Conditioning & Refrigeration System, Industrial gas storage & pumping system ( LPG & PNG), Process Automation & Instrumentation- Like PLC, HMI, VFD, Servo Drives & Motors ( SIEMENS, OMRON, Allen Bradley, Mitsubishi, Yaskawa, Delta & Schneider), Transducers, Safety Control & Measuring Instruments, Energy Saving Projects and Process Equipment’s Like – Tunnel Kiln, Ball mills, Auto spraying system, Motorized conveyors & agitators, Dryers & Furnace. Qualification: BE/B. Tech – Electrical & Electronics with Electrical Supervisor license Up to 33KV and AutoCAD proficiency (AutoCAD, SolidWorks) Experience: Required Minimum 7-9 years specific on hand work experience- advantage if the experience in same business line/continuous process industry like – Sanitaryware/ceramic field/FMCG/Automobile/Cement/Oil & Gas/Steel/Paper. General Requirements Shall be responsible for two primary functions: Equipment Maintenance and Co-ordination & Implementation of TPM system. Managing employees- Recruiting, onboarding, training, and managing electricians, developing systems- Developing and maintaining electrical systems, Planning and scheduling- work schedules, and assignments. Ensuring compliance- Ensuring compliance with electrical codes and safety standards, managing projects- the design, installation, and supply of electrical systems, managing budgets- Managing project budgets and ensuring financial objectives are met, managing records: Maintaining accurate records of electrical plans and documentation. Improving operations- Developing and improving departmental policies and procedures, and suggesting ways to increase revenues and efficiency, resolving issues- Investigating and resolving complaints, Communicating- Communicating job expectations and leading weekly team meetings. Accomplish department objectives by orienting, training, assigning, scheduling, coaching, counselling, disciplining team, communicating job expectations, planning, monitoring & reviewing job contributions and enforcing policies & procedures. Achieve objectives by contributing electrical engineering information, technical support recommendation to strategic plans, reviews, projects, preparing & completing action plans by implementing production, productivity & quality standards, resolving problems, completing audits, identifying trends & determining improvements. Perform maintenance management by supervising maintenance personnel and establishing priorities in maintenance schedules. Taking decision for Predictive & corrective maintenance of plant equipment based on performance. Meet department financial objectives by forecasting requirements, preparing an annual budget, scheduling expenditures, analysing variances & initiating corrective actions. Develop strategic electrical engineering plans by studying operational plans, existing conditions, determining needs to accomplish operational plans, mapping solutions, updating modifying requirements & solutions and preparing cost estimates & budgets. Assists with allocation, budgeting, resource planning & scheduling. Maintain approvals and assets, utilities, facility, parts inventory, monitoring purchase orders, invoice approvals, and manage the department budget. Monitor and control maintenance costs. Need to work on specific consumption & utilization. Plan electrical projects by determining specifications, establishing installation schedules, integrating requirements with process & electrical designs, verifying requirements & updating cost estimates and completes electrical projects by supervising installations & resolving design issues. Complete engineering projects on time and at or under budget. Timely Perform Performance Evaluations on direct reports and Verify Performance Evaluations are being performed on technical work force. Drive the Maintenance & Reliability initiative focused on Preventive & Predictive Maintenance, not reactive and maintain work order & inventory management. Maintain electrical systems by establishing & enforcing timely maintenance as per the schedules. Adherence of preventive maintenance schedule. Carry out routine maintenance work and respond to equipment faults and diagnose breakdown problems. Identification of obsolete & upgrade with latest or improved technology. Design, update & archiving the electrical Drawings, documents, necessary for the documentation of projects, programs and operator interface software. Broad-based, hands-on knowledge and experience with various types of instrument and electrical systems, equipment and software. Ability to operate & update data in Ariba, SAP, MS word, MS excel, MS power point, Google sheets, AutoCAD & SolidWorks etc and understand & develop drawings in AutoCAD & SolidWorks. Maintain safe & healthy work environment by establishing, following, enforcing standards & procedures and complying with codes & legal regulations. Statutory - Complying all kind of legal & statutory requirements related EHS for electrical department. Design and specify new equipment installations undertaken by the business unit. Prepare project cost estimates and capital appropriation requests justifying proposed spending with economic returns meeting company standards. Coordinate with production, maintenance, purchasing departments while preforming engineering activities. Must be able to work a flexible schedule. Failure Analysis of all Electrical equipment’s failures and compliance as per action plans, calculate the MTTR & MTBF. Provide process engineering and troubleshooting support to production, utilities as necessary to meet all the production commitments. Contributes to production flow by minimizing downtime due to equipment/parts failures. Good communication, analytical and troubleshooting skills. Willingness to work in a team-based environment and a commitment to continuous learning and improvement. Ensure TPM, KYT, TBT, KAIZEN, HAICHIBAN, 5S, Critical Six, OHSAS, ISO, QMS, EMS and Behaviour Based Safety. Typical Responsibilities O&M - Zero Down Time & 100 % uptime for all the electrical Equipment’s, Utilities and Installations (Including 33KV SS/HT Yard, PTR, all the HT & LT breakers, panels & relay control Panels, Safety, control & Protection circuits, LAS system, UPS’s and DG sets). Basic Knowledge in electrical & unit operations. Knowledge of working on HT & LT panels. Responsible for the day-to-day electrical engineering improvements and maintenance pertaining to the department while directing the activity of Electrical maintenance personnel for the safe, efficient operation of the plant Responsible for 33KV line maintenance for plant operations including external & internal. Direct the repair, maintenance, rearrangement, modification and installation of equipment. Design electrical & electronic control and communication systems for production equipment. Troubleshoot electrical and instrumentation maintenance issues and complete appropriate documentation. Evaluate all data to determine maintenance schedules to optimize equipment availability. Ensure to 100% Safe & Reliable electrical operations with required data & records around the clock (All the shifts). Ensure 100% Availability & Readiness of safe & reliable electrical installations for all the Process Equipment’s & Utilities (Including material handling & lifting equipment’s) - Zero Down Time & 100 % uptime. Ensure 100% availability of all the records & drawings at appropriate storage & designated place with display in ABC category. Need to Adhere, Ensure & Maintain 100% compliance as per the statutory & legal requirements, ISO, Company & Government policy, rules & regulations with all the required documents and timely submission with acknowledgement – including periodical testing, inspection & calibration and interacting with all the Government Officials to comply the Organization Statutory & Regulatory Compliance. PM/CBM Compliance to 100% RCA to be carried out for major & repetitive failures with appropriate corrective action and preventive actions. Adhere, Ensure, Maintain & timely completion of all the maintenance schedules for reliable maintenance – Need to review & update periodically as per the requirement & improvements to reduce maintenance cost & time and Only Proactive maintenance & approach. Minimization of Inventory & cost optimization by Indigenous Development of Spares. Development cost estimations, helps determine affordable & reliable material sources Reduction of Electricity & Maintenance- Identification, Designing & Implementation of Various Cost Reduction, Energy Savings, Reliability & Continuous Improvement Projects. Timely execution of AMC for all the Critical utilities as per the schedule. Timely execution & completion of all the approved projects & new equipment’s as per the requirement. Team Improvement, Building & Management – Skill matrix, Knowledge & Information sharing, clear communication, preparation of training calendar & appropriate training to all the team members. Scheduling of outsource requirements with appropriate justification & prior approvals. Cost Optimization with Budget & Control Measures.