Job Overview: Experienced Biopharma Design Engineer proficient in P&ID development and 3D modelling for process skids and plant piping systems. The ideal candidate will combine technical expertise with practical knowledge of Life science/biotech facility design requirements. Experience Level: 5-10 years Qualification: Bachelor's degree in Chemical, Mechanical, or related Engineering field Key Responsibilities: Create and review Process and Instrumentation Diagrams (P&IDs) following industry standards and GMP requirements. Develop 3D models for process skids and plant piping systems using industry-standard software (e.g., AutoCAD Plant 3D, REVIT). Coordinate with multi-disciplinary teams including process, mechanical, and automation engineers. Ensure compliance with ASME BPE standards. Essential Skills: Experience with modular/skid design. Knowledge of cleaning and sterilization processes. Strong analytical and problem-solving abilities. Excellent attention to detail. Good communication and documentation skills. Ability to work independently and as part of a team. Show more Show less

Job description: Position requires a Structural Engineer with 5 to 15 years of experience with thorough knowledge of Civil & Structural design and Engineering techniques. Responsible to perform Structural calculations independently, lead projects & deliver good quality reports and drawings. Responsible to plan & conduct independent work requiring judgement in evaluation, selection, application and compliance to codes, standards, specifications, and criteria. Devise new approaches to structural engineering problems and arrive workable solutions within budgeted hours and resources. Through professional communication skills, should be able to work with other engineering disciplines, sometimes across multiple offices. Education: Bachelor Degree in Civil Engineering (or) Master Degree in Structural Engineering from Reputed Institution or University with Academic Excellence. Experience, Skills & Technical Requirements: Civil & Structural Engineering experience in the Industrial domains such as Oil & Gas or Petrochemical Industry or Power Plants or Food & Beverages/ Pharma/ Semi-Conductor plant or other Industrial projects is preferred with a varied range of project execution. Demonstrated ability towards load calculation, structural analysis, sizing, design, and report preparation. Strong FEED and detailed design experience in steel & concrete structures, different foundation systems. Working knowledge on typical American codes such as IBC, ASCE, AISC and ACI Sound knowledge of structural calculation software such as STAAD, RISA3D, RISA FOUNDATION, RISA CONNECTION, LPILE etc. Structural Calculation Experience in Green field, retrofitting & modifications projects. Skilled to read, operate and review Laser scan data and 3D models in tools like SPR, Navis Works etc. Knowledge on European and British standards is an added advantage. Capable to read, interpret geotechnical reports. Exposure to Offshore Structures is an added attribute. Drawing Preparation skills with AutoCAD is an added advantage. Strong interpersonal leadership skills are essential for effective communication of complex issues across multiple offices and teams. Typical Duties & Responsibilities: Include but not limited to Civil/ Structural Calculations & Report Preparation Provide drawings for own designs & produce sketches to incorporate into the drawings by Designers. Arrive multiple design options with structural feasibilities, site constraints and compare it’s cost, schedule implications. Co-ordinate closely with Lead, Designer, and multi-disciplinary teams Checking the drawings & reviewing shop drawings Handle, draft, organize, store and retrieve the required inputs and outputs of the structural deliverables. Show more Show less

Job Summary: The Plumbing Lead Engineer as a part of an integrated, multi-discipline A/E Process team will be involved in Plumbing system design, detailed engineering for US Projects. The industries desirable are Advanced Technologies, Life Science, Pharma and Food or Beverage design. Education: Bachelor’s degree in Building services/Mechanical Engineering. Typical Duties & Responsibilities: Organize, assign, and delegate necessary engineering and design tasks to produce construction documents in conjunction with a team of engineers and designers. Manage scope, budget, and schedule to meet project goals. Coordinate and collaborate real time with other disciplines such as electrical, structural, architectural and process to develop designs. Independently lead plant design activities as an area/system leader and coordinate with multi-discipline designers. Perform Internal plumbing system include domestic cold & hot water supply, soil, waste & venting, rainwater down takes & disposal systems based on rainfall intensity, basement drainage, subsoil drainage. Hydraulic design calculation for water supply, sewerage, and storm water system through excel sheet. The knowledge of relevant software performing the above calculations shall be preferred and given advantages including Auto CAD, Revit, BIM 360, plumbing software, SprinkCALC etc. Perform quality review checks for 2D/3D modelling. Hot water system including Hot water generator, Domestic Steam boiler and heat pump etc. & relevant design calculations as per standards & applicable code. Effective Communication with client leads in understanding & delivering the scope of work on timely manner with utmost quality. Develops designer effort-hour estimates for plumbing system. Exercise judgment in developing plans or alternatives and work with teams to assure quality plans. Provide guidance and mentoring to project engineers and designers on a project-by-project basis. Display strong communication and interpersonal skills and have the ability to work in a fast-paced team environment with multiple deadlines. Requirements: Must have knowledge on US Plumbing design codes & standards. Must have worked on plumbing systems of US projects. Fire Fighting system design knowledge on including sprinkler, hydrants (internal & external), water curtain, plant rooms and water tanks, fire extinguishers, gas suppression system, signages as per relevant standards and applicable local & international codes. Design knowledge of gas supply systems will be an added advantage. Knowledge of the HVAC system will be an added advantage. 8+ years of Experience in plumbing design. Relevant engineering/design experience in industrial/advanced technology sector/Life sciences. Semiconductor, Life sciences/Pharma, Food & Beverage experience is preferable. Engineering/ design experience in plumbing, fire protection systems. Ability to interact with other engineering disciplines, clients, and vendors at all levels. Experience using REVIT in a BIM environment will be an added advantage. Good understanding & Application of IPC, UPC, US Building Plumbing codes & other relevant standards. Proficient in Microsoft suite (Excel). Excellent English level - written and spoken. Show more Show less

Summary: Technical Lead for the Information Solutions team will have overall responsibility to lead and develop projects with clients across multiple industry sectors primarily focused on Information Solutions scope. This scope can include projects related to SCADA, reporting, IoT, data collection, reporting, or analytics. Education: Bachelor of Engineering - Electronics & Communication Engineering or Instrumentation and Controls Engineering or Computer Science Engineering preferred or equivalent degree with experience Responsibilities: Technical project execution within the Information Solutions group, which includes budget, schedule, quality, and customer satisfaction. Interface with clients to define and manage scope on complex projects. This will require significant technical knowledge as well as project management skills Convey a positive image of Design Group and support for the development of strong Culture consistent with the Guiding Principles of Leadership. Understanding project requirements in order to develop/configure industrial control packages accordingly for use in manufacturing space. Understanding technical and operational constraints to create project development and commissioning plans. Working as an individual or in a team with other software engineers. Can also include working on large projects with other engineering disciplines such as greenfield design of a new manufacturing plant and all associated software system Designing control/SCADA systems including databases and database interfaces, data analytics & reporting, scripting (VB, python, etc.) and general programming Onsite startup of systems that you designed. If required. Understanding of back-end computing infrastructure used in manufacturing (compute hardware, virtualization, OS’s, networking, databases, etc.) is a plus. Managing multiple scopes of work in various phases simultaneously Communicating with client stake holders to understand scopes of work and deliverables Requirements: 12+ years of System Integration, SCADA and/or MES application development. Candidates with experience in the food and beverage or life science industries are preferred Preferred Ignition Certification Hands on experience in Designing control/SCADA systems including databases and database interfaces, data analytics & reporting, scripting (VB, python, SQL etc.) and general programming Requires strong fluency in at least two of the following SCADA platforms: Ignition, Rockwell, Wonderware, or GE. Strong SQL skills are a plus Experience in VMware, Hyper- V (virtualization tools), Cloud (amazon, google, azure), IoT edge., Linux OS Requires excellent analytical and problem-solving skills. Familiarity with Rockwell (ControlLogix, PLC5, SLC500) and Siemens PLC’s, PanelView HMI’s is a plus. The ability to simultaneously organize and successfully execute multiple project responsibilities is needed. Candidates must possess good communication and interpersonal skills, and the ability to interact with all levels of management, clients, and vendors. Contractor and Construction management skills are also a plus. Show more Show less

Job description: As a Delivery Lead/ Manager for the Control System Integration team, you will have overall responsibility to lead and develop projects with clients across multiple industry sectors focused on the Control system design, Process controls and information solutions scope. Require hands-on technical expertise with mentorship responsibilities to develop the next generation of electrical, controls & Information solutions engineers. Education and Experience: Bachelor’s degree in Electrical and Electronics Engineering (EEE) or Electronics and Communication Engineering (ECE) or Instrumentation and Controls Engineering (ICE) with 15+ years of relevant industry experience; Master’s degree Preferred Professional certifications in automation/controls Experience with multiple control system platforms Responsibilities: Technical Leadership Design, develop, and optimize control systems for process industries, and packaging machinery. Provide technical solutions for complex automation challenges across multiple manufacturing platforms Develop and maintain electrical and control system standards and best practices Troubleshoot and resolve critical control system issues across various manufacturing platforms Execute system improvements to enhance equipment efficiency, reliability, and product quality Implement industrial networking solutions and integrate various control systems Mentorship & Knowledge Transfer Coach and mentor junior electrical and controls engineers in electrical and control system design, programming, and troubleshooting Review and validate electrical and control system designs and programs developed by junior engineers Guide junior electrical and controls engineers in developing engineering specifications and original design concepts Develop and conduct technical training programs for team members Create technical documentation and knowledge base materials Foster a culture of continuous learning and innovation within the team Tool/Technical skills: 15+ years of experience in industrial automation and controls engineering Demonstrated expertise in process and packaging machinery control systems Extensive experience in selection and use of control system hardware (e.g., controller, power supplies, input/output cards and chassis, communication hardware, etc.) Expert-level knowledge in PLC, HMI and SCADA system design, programming, and troubleshooting (preferably PLC - Allen Bradley, Siemens, SCADA – Ignition, Wonderware & GE, Drives – Rockwell & Siemens) Strong understanding of industrial networks and communication protocols (Profinet, Ethernet/IP, Modbus, DeviceNet, BACnet) Proven experience with motion control systems and servo applications (Servo drive parameterization, programming, and tuning) Expert knowledge in selection of motors, motor controllers or drives, calculation of motor horsepower, torque, speed range, reduction ratios etc. selection of sensor technologies applicable to the desired type of measurement and have good knowledge in sensor characteristics. selection of other control elements like solenoid valves, On-off devices/relays, self-regulating devices, transducers, current/pneumatic [I/P] conversion, etc. based on application Conversant with codes, standards, and regulations like UL, IEC, ANSI, ISA, NEC, NEMA, and NFPA. Knowledge of Industry 4.0 and IIoT Technologies Knowledge of Manufacturing Execution Systems (MES) Integration Required Competencies Strong problem-solving and analytical skills Excellent communication and interpersonal abilities Proven mentoring and coaching experience Ability to work independently and lead technical initiatives Strong documentation and technical writing skills Project management capabilities Show more Show less

Job Summary: Technical Consultant will be responsible for designing, developing, and implementing software solutions in Microsoft technologies (.NET, C#, SQL Server etc..). Knowledge on SOAP and Rest API is must. In-depth knowledge of Microsoft technologies will be helpful. This position requires with an experience with 3 to 7 years with through knowledge in Microsoft technologies (.NET, C#, SQL Server etc..). Through professional communication skills, should be able to work with client teams, sometimes across multiple offices. Education: Bachelor’s degree in computer science or computer engineering from Reputed Institution or University with Academic Excellence. Requirements: This is a regular, full-time position with the understanding that a regular workweek will require extended days and hours as needed to meet business needs. Strong Analytical skills to address complex business scenarios. Strong interpersonal skills are essential for effective communication of complex issues across multiple offices and teams. Experience in C#, ASP.NET and T-SQL. Follow Software development Lifecyle practices. Strong knowledge and focus on .NET Framework, .NET Core Framework and MVC. Experience on Data integration methodologies including REST/SOAP API. Knowledge on Azure or any Cloud Platform technologies. Responsibilities: Development and Support (.NET Application) Utilize experience with relational databases to interchange or integrate data to and from back-end databases or services. Support transition(s), Go Live and Post Go live. Create relevant documentation (Technical Analysis, Design, and Deployment (or Release)) Create execution schedule. Meet the timelines. Attend meetings and update project status. Show more Show less

Job Summary: Controls/Automation Engineer will work on PLC programming and troubleshooting process / packaging machinery and line control systems. This role will challenge you to be a passionate and successful business family member all while expanding your technical abilities. Education: B.E. in Electrical Engineering, Electronics and Communication, Instrumentation and Control, or equivalent technical degree. Responsibilities: Create user applications to monitor and control the production of consumer goods, to satisfy various regulatory agencies, using modern industry standards. Design control systems that provide instantaneous feedback on the production life cycle Design, program, and troubleshoot packaging machinery and line control systems. Electrical engineering design support Electrical control panel design Industrial controller (PLC) programming design and Human Machine Interface (HMI) development Electrical engineering initiatives Support Design Group project teams. Requirements: 1-3 years’ experience in Industrial PLC or SCADA programming. This position will require the ability to simultaneously organize and successfully execute multiple project responsibilities. Candidates need to possess good communication and interpersonal skills, flexibility with tasks and the ability to interact with all levels of management, clients, and vendors. Project experience with Data analytics and reporting, electrical engineering and PLC automation applications is preferred. Project experience with AutoCAD Electrical and Rockwell PLC Programming is a plus. Project experience with pharmaceutical, consumer products and high-speed environments is a plus. Willing and able to travel as necessary for project requirements to include but not be limited to project installation and start-up activities, client meetings, company sponsored meetings, trainings, industry related seminars, forums, or conventions, etc. Travel Show more Show less

Job Summary: As an Electrical Design Engineer, you will work in our office and remotely with engineering teams of Architects and ME/EE-Engineers to help design technical solutions to meet our client’s business needs. The successful candidate will work with licensed engineers and other experienced designers to design power distribution and lighting systems for manufacturing, distribution, and other industrial and commercial facilities. Requirements: Minimum 6 to 8 years of Electrical panel design experience. Any Food, Beverage or Pharmaceutical Facilities or Industry Engineering experience is preferred. Hands on experience in preparation of single line diagrams and panel IGA & OGA drawings, Schematics based upon technical specifications, requirement of customer. Perform calculation & selection of Motors, Drives, AC, Load calculations & cable selections based upon application & design standards. Design Engineering, implement, maintain, and. Improve electrical instruments, equipment, facilities, Components, Products and systems for commercial & industrial purposes. Prepare and study technical drawings, specifications of electrical systems, and customer requirements. Writing regular progress reports and presenting them to project managers and clients Knowledge of UL508A, IEC, NEMA and other standards Tools Knowledge: AutoCAD Electrical, Eplan P8 Able to produce electrical design on a multi-discipline project Proficiency in the use of AutoCAD software is required. Must possess excellent communication and interpersonal skills, and the ability to interact with all levels of management, clients, and vendors. Must also possess good general computer skills including the use of Microsoft Excel, Word, and Outlook. Education: Master's / Bachelor’s of Engineering in Electrical and Electronics Engineering Responsibilities: Power utility coordination 277/480V building services Power distribution and calculations including switchboards, panel boards, transformers, wire sizing, voltage drop, conduit fill, cable tray sizing and fill, cooling calculations Selection of Motors, Drives, PLC and IO modules Preparation of design criteria, one-line diagrams and specification for electrical equipment. Selection and sizing of UPS for SCADA system and three phase inverters on site. Industrial control panel design - PLC , RIO and VFD Design wiring and conduit drawings using AutoCAD. Help resolve EE oriented Change Request Notices and Request for Information. Resolve RFIs Prepare grounding and bonding plan for new equipment. Develop electrical drawings using AutoCAD. Show more Show less

As an Electrical Engineer, you will work in our office and remotely with engineering teams of Architects and ME/EE-Engineers to help design technical solutions to meet our client’s business needs. The successful candidate will work with licensed engineers and other experienced designers to design power distribution and lighting systems for manufacturing, distribution, and other industrial and commercial facilities. Responsibilities: Power utility coordination 277/480V building services Power distribution and calculations including switchboards, panel boards, transformers, wire sizing, voltage drop, conduit fill, cable tray sizing and fill, AIC calculations Motor Control Center specification including VFDs and starters Interior and exterior lighting design using Visual lighting Preparation of design criteria, one-line diagrams and specification for electrical equipment. Selection and sizing of UPS for SCADA system and three phase inverters on site. MV, LV and fiber optics cable sizing and routing. Perform lightning and insulation coordination studies. Design wiring and conduit drawings using AutoCAD. Help resolve EE oriented Change Request Notices and Request for Information. Assist in developing construction drawings and review work packages. Resolve RFIs and FCRs. Prepare grounding and bonding plan for new equipment. Maintain NAMS and cable & raceway program. Develop electrical drawings using AutoCAD. Requirements: Minimum 5 years of Electrical design experience. Any Food, Beverage, Pharmaceutical or Semiconductor Facilities Engineering experience is highly desired. Hands on experience in preparation of single line diagrams and panel IGA & EGA drawings, Schematics based upon technical specifications, requirement of customer. Perform calculation & selection of Motors, Drives, AC, Load calculations & cable selections based upon application & design standards. Perform electrical studies for Voltage drop, Load Flow, Short circuit, Motor starting, Protective device coordination, Arc flash analysis using SKM / Easypower software Design Engineering, implement, maintain, and improve electrical instruments, equipment, facilities, Components, Products and systems for commercial & industrial purposes. Direct and coordinate manufacturing, installation, support, documentation, and testing activities to ensure compliance with specifications, codes, and customer requirements. Perform detailed calculation to compute and establish manufacturing, site and installation, standards, and specifications. Prepare and study technical drawings, specifications of electrical systems, and topographical maps to ensure that installation and operations conforms to standards and customer requirements. Writing regular progress reports and presenting them to project managers and clients Knowledge of UL508A, IEC, NEMA, British (BS), European, IS and other standards Tools Knowledge: AutoCAD Electrical, SKM, Easypower, Visual Lighting, REVIT Ability to produce electrical design on a multi-discipline project Proficiency in the use of AutoCAD (MEP) software is preferred. Must possess excellent communication and interpersonal skills, and the ability to interact with all levels of management, clients, and vendors. Must also possess good general computer skills including use of Microsoft Excel, Word, and Outlook. Education: Bachelor's/ Master's degree in Electrical and Electronics Engineering Additional Job Description: Must be able to perform level 1 duties competently and consistently. Design/alteration of moderately complex electrical equipment Prepare layouts using CAD tools. Evaluation of moderately complex designs; make engineering changes. Evaluate new parts. Prepare schematics, assemblies, detailed drawings, and bills of material (BOM) for moderately complex equipment. May support manufacturing/assembly teams. Manage and maintain project file. May travel to US offices for project execution / customer site to support field teams with technical assistance as required. Design/alteration of highly complex machines, sections, systems, or units; analyze designs with regards to performance and production methods to be use Act as a consultant to manufacturing/assembly and field teams; conduct performance tests or investigations to help solve production problems or improve manufacturing techniques where product design is a factor. Coordinate execution of design assignment with related work of manufacturing, tooling, material planning and other groups; direct preparation of design layouts/sketches/notes in readiness for preparation of final production, installation, and assembly drawings Observe products in operation to obtain essential data for further study; prepare initial operating and service instructions and preliminary service parts recommendations on new models and assemblies. Plan and lay out work for group, instruct new employees, check progress of work. Lead, coach, and mentor team of professionals Other duties as assigned. Show more Show less

Job Summary: As an Electrical Design Engineer, you will work in our office and remotely with engineering team of Architects and ME/EE-Engineers to help design technical solutions to meet our client’s business needs. The successful candidate will work with licensed engineers and other experienced designers to design power distribution and lighting systems for manufacturing, distribution, and other industrial and commercial facilities. Education: Bachelor of Engineering in Electrical and Electronics. Requirements: Minimum 4 to 8 years of Electrical panel design experience. Any Food, Beverage or Pharmaceutical Facilities or Industry Engineering experience is preferred. Hands on experience in preparation of single line diagrams and panel IGA & OGA drawings, Schematics based upon technical specifications, requirement of customer. Perform calculations & selection of Motors, Drives, AC, Load calculations & Cable selections based upon application & design standards. Design Engineering, implement, maintain, and. Improve electrical instruments, equipment, facilities, Components, Products, and systems for commercial & industrial purposes. Prepare and study technical drawings, specifications of electrical systems, and customer requirements. Writing regular progress reports and presenting them to project managers and clients Knowledge of UL508A, IEC, NEMA and other standards Able to produce electrical design on a multi-discipline project. Proficiency in the use of AutoCAD software is required. Must possess excellent communication and interpersonal skills, and the ability to interact with all levels of management, clients, and vendors. Must also possess good general computer skills including the use of Microsoft Excel, Word, and Outlook. Tool Knowledge: AutoCAD Electrical, Revit & EPlan P8 added advantage. Responsibilities: Power utility coordination 277/480V building services Power distribution and calculations including switchboards, panel boards, transformers, wire sizing, voltage drop, conduit fill, cable tray sizing and fill, cooling calculations. Selection of Motors, Drives, PLC and IO modules Preparation of design criteria, one-line diagrams and specification for electrical equipment. Selection and sizing of UPS for SCADA system and three phase inverters on site. Industrial control panel design - PLC, RIO and VFD Design wiring and conduit drawings using AutoCAD. Help resolve EE oriented Change Request Notices and Request for Information. Resolve RFIs Prepare grounding and bonding plan for new equipment. Develop electrical drawings using AutoCAD. Show more Show less

Job Summary: As an Electrical Design Engineer, you will work in office with engineering teams of Architects and ME/EE-Engineers to help design technical solutions to meet our client’s business needs. The successful candidate will work with licensed engineers and other experienced designers to design power distribution and lighting systems for manufacturing, distribution, and other industrial and commercial facilities. Responsibilities: Power utility coordination 277/480V building services Power distribution and calculations including switchboards, panel boards, transformers, wire sizing, voltage drop, conduit fill, cable tray sizing and fill, cooling calculations Selection of Motors, Drives, PLC and IO modules Preparation of design criteria, one-line diagrams and specification for electrical equipment. Selection and sizing of UPS for SCADA system and three phase inverters on site. Industrial control panel design - PLC , RIO and VFD Design wiring and conduit drawings using AutoCAD. Help resolve EE oriented Change Request Notices and Request for Information. Resolve RFIs Prepare grounding and bonding plan for new equipment. Develop electrical drawings using AutoCAD. Education: Bachelor's degree in Electrical and Electronics Engineering Requirements: Minimum 6 to 8 years of Electrical panel design experience. Any Food, Beverage or Pharmaceutical Facilities or Industry Engineering experience is preferred. Hands on experience in preparation of single line diagrams and panel IGA & OGA drawings, Schematics based upon technical specifications, requirement of customer. Perform calculation & selection of Motors, Drives, AC, Load calculations & cable selections based upon application & design standards. Design Engineering, implement, maintain, and. Improve electrical instruments, equipment, facilities, Components, Products, and systems for commercial & industrial purposes. Prepare and study technical drawings, specifications of electrical systems, and customer requirements. Writing regular progress reports and presenting them to project managers and clients Knowledge of UL508A, IEC, NEMA and other standards Tools Knowledge: AutoCAD Electrical, Eplan P8 Able to produce electrical design on a multi-discipline project. Proficiency in the use of AutoCAD software is required. Must possess excellent communication and interpersonal skills, and the ability to interact with all levels of management, clients, and vendors. Must also possess good general computer skills including the use of Microsoft Excel, Word, and Outlook. Show more Show less

Job Summary: As an Electrical Engineer Lead, you will work in our office and remotely with engineering teams of Architects and ME/EE-Engineers to help design technical solutions to meet our client’s business needs. The successful candidate will work with licensed engineers and other experienced designers to design power distribution and lighting systems for manufacturing, distribution, and other industrial and commercial facilities. Education: Bachelor's/ Master's degree in Electrical and Electronics Engineering Responsibilities: Power utility coordination 277/480V building services Power distribution and calculations including switchboards, panel boards, transformers, wire sizing, voltage drop, conduit fill, cable tray sizing and fill, AIC calculations Motor Control Center specification including VFDs and starters Interior and exterior lighting design using Visual lighting Preparation of design criteria, one-line diagrams and specification for electrical equipment. Selection and sizing of UPS for SCADA system and three phase inverters on site. MV, LV and fiber optics cable sizing and routing. Perform lightning and insulation coordination studies. Design wiring and conduit drawings using AutoCAD. Help resolve EE oriented Change Request Notices and Request for Information. Assist in developing construction drawings and review work packages. Resolve RFIs and FCRs. Prepare grounding and bonding plan for new equipment. Maintain NAMS and cable & raceway program. Develop electrical drawings using AutoCAD. Requirements: Minimum 12-18 years of Electrical design experience. Any Food, Beverage, Pharmaceutical or Semiconductor Facilities Engineering experience is highly desired. Hands on experience in preparation of single line diagrams and panel IGA & EGA drawings, Schematics based upon technical specifications, requirement of customer. Perform calculation & selection of Motors, Drives, AC, Load calculations & cable selections based upon application & design standards. Perform electrical studies for Voltage drop, Load Flow, Short circuit, Motor starting, Protective device coordination, Arc flash analysis using SKM / Easypower software Design Engineering, implement, maintain, and improve electrical instruments, equipment, facilities, Components, Products and systems for commercial & industrial purposes. Direct and coordinate manufacturing, installation, support, documentation, and testing activities to ensure compliance with specifications, codes, and customer requirements. Perform detailed calculation to compute and establish manufacturing, site and installation, standards, and specifications. Prepare and study technical drawings, specifications of electrical systems, and topographical maps to ensure that installation and operations conforms to standards and customer requirements. Writing regular progress reports and presenting them to project managers and clients Knowledge of UL508A, IEC, NEMA, British (BS), European, IS and other standards Tools Knowledge: AutoCAD Electrical, SKM, Easypower, Visual Lighting, REVIT Ability to produce electrical design on a multi-discipline project Proficiency in the use of AutoCAD (MEP) software is preferred. Must possess excellent communication and interpersonal skills, and the ability to interact with all levels of management, clients, and vendors. Must also possess good general computer skills including use of Microsoft Excel, Word, and Outlook. Show more Show less

Job Description: Our Controls Engineer will develop automation solutions and participate in various phases of automation projects including creating design specifications, software configuration, Programming, and testing, as well as commissioning & start-up (if required) of a variety of high speed and other automated manufacturing processes. Education: Bachelor’s degree in Electrical or Electronics & Communication or Instrumentation & Controls Engineering or similar degree preferred. Responsibilities: Create and design automation control systems and create project documentation and drawings to meet client requirements. Diagnose automation problems and interact with teams, clients and vendors. Configure software and hardware packages according to client design specification. Program PLCs (Allen-Bradley, Rockwell- Studio 5000, RSLogix 5000, RSLogix 500) and HMI / SCADAs (Factory Talk View SE and ME, Cimplicity, Wonderware, Ignition) Drives Programming (Powerflex Drive Configuration, Kinetix Drive Programming) Ability to handle Rockwell PLC and SCADA conversion project and Electrical CAD Experience. Communicate with project stakeholders the progress relative to plan Manage engineering projects as assigned. Manage project deliverables to agreed schedule and scope. Validate and commission facility systems following established execution protocols and ensure a successful turnover of the system to the customer. Requirements: 6+ years of direct experience as a controls engineer working on automated processes/system integration in High Tech, Food, Beverage, Consumer Health Product or other industrial manufacturing environment. Experience creating and designing automation controls systems (PLC, SCADA) Understanding of industrial control panel design and fabrication (UL508A). Understanding of engineering documentation such as P&IDs, process flow diagrams and standard operating procedures. Experience with field instrumentation, control system installation and configuration. Familiarity with machine safety applications, electrical power distribution and control panel design. Proficient with written and verbal technical communication including generating reports and conducting group presentations. Travel Show more Show less

Job Summary: Apply your knowledge of programming methods, electrical design and engineering problem solving to 21st century manufacturing. Software Programming /Design/ Controls/Automation Engineer will work on the Electrical panel design, program, and troubleshoot packaging machinery and line control systems. This role will challenge you to be a passionate and successful business family member all while expanding your technical abilities. Education: B.E. in Computer Science, Information Technology, Electrical Engineering, Electronics and Communication, Instrumentation and Control, or equivalent technical degree. Responsibilities: Create user applications to monitor and control the production of consumer goods, to satisfy various regulatory agencies, using modern industry standards. Design control systems that provide instantaneous feedback on the production life cycle Design, program, and troubleshoot packaging machinery and line control systems. Industrial controller (PLC) programming design and Human Machine Interface (HMI) development Electrical engineering initiatives Support Design Group project teams. Requirements: 1-3 years’ experience in Industrial control panel design or PLC or SCADA programming. This position will require the ability to simultaneously organize and successfully execute multiple project responsibilities. Candidates need to possess good communication and interpersonal skills, flexibility with tasks and the ability to interact with all levels of management, clients, and vendors. Knowledge in SQL and Python Programming. Project experience with Data analytics and reporting, electrical engineering and PLC automation applications is preferred. Project experience with AutoCAD Electrical and Rockwell PLC Programming is a plus. Project experience with pharmaceutical, consumer products and high-speed environments is a plus. Willing and able to travel as necessary for project requirements to include but not be limited to project installation and start-up activities, client meetings, company sponsored meetings, trainings, industry related seminars, forums, or conventions, etc. Travel Show more Show less

Job Description Process and maintain confidential employment documents. Provide support to recruitment function with activities such as posting job requisitions, sourcing resumes, scheduling interviews, coordinating drug screens, and career fair registration. Support Generalists in conducting exit interviews Assemble new hire and benefit materials. Answer employee questions about human resources programs, policies, and procedures. Prepare and generate reports for both internal and external customers. Coordination of meetings/events, including setup/cleanup, ordering refreshments, securing location, etc. Oversee specific processes in a “process owner” capacity. Support team projects as needed. Assist payroll team as needed. Other duties as assigned. Additional Job Description Resolve questions or concerns regarding travel arrangements, lodging, vehicle rental, etc. Assist with the implementation of new travel enhancements and training. Review and approve payment for travel partner invoices; coordinate yearly hotel RFP process. Handle all facility related Internal and external customers/contractors. Manage the issuing and cancellation of security passes to staff and contractors. Manage key and lock changes to offices, including ordering of supplies. Operate and manage energy and waste management processes and contract. Carry out frequent walk rounds, ensuring the building is in good order, noting any defects and correcting them. Recommend and carry out improvements that could be made to the cleaning, engineering and security services. Attend external meetings with landlords and related stakeholder Other duties as assigned

Job Summary: The selected candidate will perform 3D Modeling of Structural Elements/ Members, 2D Drawing Plans/Elevations/ Details Creation primarily in BIM 360/ Autodesk Construction Cloud/ Revit Structure or in another 3D/ 2D Structural CAD software. This role calls for a thorough working knowledge of the subject matter. Educational & Experience Requirements: Education: Diploma in Civil Engineering/ Bachelor of Civil Engineering Experience: 5+ Years Skill summary: Experienced in 3D Modeling of Structural members in different tools and software. Experienced in Detailing of various Structural items such as Structural Steel, Concrete elements & different Foundation systems. Experienced in various Industrial projects by coordinating with multi-disciplinary Engineering Teams. Exposure to Interference Checks. Exposure to Indian/ American/ International Industrial projects. Capable to read, interpret various sketches, inputs & details. Hands on experience in Revit, BIM 360/ Autodesk Construction Cloud/ Revit Structure is an added advantage. Strong interpersonal skills & communication skills are essential. Tool Knowledge: Revit Structure, BIM 360, Auto CAD, MicroStation, Plant 3D, SP3D, Advanced Steel, Tekla Structures etc. Responsibilities: Modeling of Structural components, RCC and other civil / structural items and extraction and detailing, extensive experience in Revit and AutoCAD. Co-ordinating with Multi-Disciplinary Engineering Team and Architects.

Summary: Entry Level IS Engineer will work on designing MES applications including databases and database interfaces, data analytics & reporting, scripting (Shell, Python, SQL etc.) and general programming. This role will challenge you to be a passionate and successful business family member all while expanding your technical abilities and offers opportunities to learn modern DevOps practices like containerization, CI/CD, and infrastructure automation. Qualification: Bachelor’s in Computer Science & Engineering / Information Technology / Data Analytics & Machine Learning - With good understanding and knowledge in programming languages (Python & C#), Cloud & DevOps: Docker, Kubernetes, GitHub Actions, Infrastructure as Code. Requirements: Understanding of back-end computing infrastructure used in manufacturing (computer hardware, virtualization, OS’s, networking, databases, etc.) Exposure to Docker and container orchestration tools like Kubernetes. Understanding of CI/CD pipelines and tools like GitHub Actions Basic knowledge in Infrastructure as Code using cloud provisioning tools like AWS, Azure. Comfortable with certificate management and secure communication protocols. This position will require the ability to simultaneously organize and successfully execute multiple project responsibilities. Candidates need to possess good communication and interpersonal skills, flexibility with tasks and the ability to interact with all levels of management, clients, and vendors. Must also possess good general computer skills including the use of Microsoft Excel, Word, and Outlook. Responsibilities: Assist in implementing containerized applications using Docker and manage workloads via Kubernetes. Develop and manage CI/CD pipelines for code deployment using GitHub Actions or similar tools. Provision and manage cloud infrastructure and Infrastructure as Code practices. Write clean, maintainable code and scripts (Python, SQL, shell scripting). Maintain program documentation and technical specifications. Program hardware/software integration and systems diagnostics to support machine-based control systems. Design and script interfaces for data acquisition, diagnostics, and system performance monitoring. Support Design Group project teams.

Qualification: Bachelors in Electronics and Electrical Engineering or Electronics and Communication Engineering or Instrumentation and Control Engineering or Equivalent degree Summary: Entry Level Controls Engineer will work on PLC/SCADA Programming, testing & commissioning. This role will challenge you to be a passionate and successful business family member all while expanding your technical abilities. Requirements: 0-2 years of experience in Industrial control panel design and basic knowledge in PLC or SCADA programming. Project experience with electrical engineering and PLC automation applications is preferred. Project experience / Knowledge in AutoCAD Electrical and Rockwell PLC Programming is a plus. This position will require the ability to simultaneously organize and successfully execute multiple project responsibilities. Candidates need to possess good communication and interpersonal skills, flexibility with tasks and the ability to interact with all levels of management, clients, and vendors. Must also possess good general computer skills including the use of Microsoft Excel, Word, and Outlook. Responsibilities: Create user applications to monitor and control the production of consumer goods, to satisfy various regulatory agencies, using modern industry standards. Design control systems that provide instantaneous feedback on the production life cycle. Design, program, and troubleshoot packaging machinery and line control systems. Electrical engineering design support Industrial controller (PLC) programming design and Human Machine Interface (HMI) development Electrical engineering initiatives Support Design Group project teams

Job Summary: Apply your knowledge of programming methods, electrical design and engineering problem solving to 21st century manufacturing. Software Programming /Design/ Controls/Automation Engineer will work on the Electrical panel design, program, and troubleshoot packaging machinery and line control systems. This role will challenge you to be a passionate and successful business family member all while expanding your technical abilities. Education: B.E. in Computer Science, Information Technology, Electrical Engineering, Electronics and Communication, Instrumentation and Control, or equivalent technical degree. Responsibilities: Create user applications to monitor and control the production of consumer goods, to satisfy various regulatory agencies, using modern industry standards. Design control systems that provide instantaneous feedback on the production life cycle Design, program, and troubleshoot packaging machinery and line control systems. Industrial controller (PLC) programming design and Human Machine Interface (HMI) development Electrical engineering initiatives Support Design Group project teams. Requirements: 1-3 years’ experience in Industrial control panel design or PLC or SCADA programming. This position will require the ability to simultaneously organize and successfully execute multiple project responsibilities. Candidates need to possess good communication and interpersonal skills, flexibility with tasks and the ability to interact with all levels of management, clients, and vendors. Knowledge in SQL and Python Programming. Project experience with Data analytics and reporting, electrical engineering and PLC automation applications is preferred. Project experience with AutoCAD Electrical and Rockwell PLC Programming is a plus. Project experience with pharmaceutical, consumer products and high-speed environments is a plus. Willing and able to travel as necessary for project requirements to include but not be limited to project installation and start-up activities, client meetings, company sponsored meetings, trainings, industry related seminars, forums, or conventions, etc. Travel

You will apply your knowledge of programming methods, electrical design, and engineering problem-solving to 21st-century manufacturing. As a Design/ Controls/Automation Engineer, you will be responsible for working on electrical panel design, programming, and troubleshooting packaging machinery and line control systems. This role will not only challenge you to be a passionate and successful business team member but also expand your technical abilities. Your educational background should include a B.E. in Electrical Engineering, Electronics and Communication, Instrumentation and Control, or an equivalent technical degree. Your responsibilities will include creating user applications to monitor and control the production of consumer goods to meet various regulatory agency requirements using modern industry standards. You will design control systems to provide instantaneous feedback on the production life cycle, program and troubleshoot packaging machinery and line control systems, provide electrical engineering design support, design electrical control panels, program industrial controllers (PLC), and develop Human Machine Interface (HMI). Additionally, you will be involved in electrical engineering initiatives and support Design Group project teams. The requirements for this position include 1-3 years of experience in industrial control panel design, PLC, or SCADA programming. You must demonstrate the ability to organize and execute multiple project responsibilities simultaneously. Strong communication and interpersonal skills, task flexibility, and the ability to interact with all levels of management, clients, and vendors are essential. Knowledge of SQL and Python Programming is required. Preferred qualifications include project experience in data analytics and reporting, electrical engineering, and PLC automation applications. Experience with AutoCAD Electrical and Rockwell PLC Programming is a plus, as well as familiarity with pharmaceutical, consumer products, and high-speed environments. You should be willing and able to travel as needed for project requirements, including project installation and start-up activities, client meetings, company-sponsored meetings, trainings, industry-related seminars, forums, or conventions.,