184 Design Calculations Jobs - Page 3

Job Description Responsible for planning and design of all Electrical part of building services elements and infrastructure networks. Responsible for concept design based on evaluation for various options in coordination with architectural, structural input and in accordance with initial load estimates. Responsible for design calculations and quantity estimation. Responsible for schematic and detailed design of the electrical system of building services elements. Ensure all design work is carried out in accordance with Company s quality standard procedures. Candidate Specification : B.E /B. Tech in Electrical Engineering discipline. Minimum 4-8 years of experience as engineer preferably in building project design. Extensive experience in Electrical building services design. Proficient in Electrical design software like Dialux Evo / Dialux 4.13, Earth Grid study and should have individually handled number of Amtech models individually. Well versed in reviewing and checking of drawings and calculations. Good knowledge of relevant international codes and regulations such as BS/BSEN/NFPA/Lighting Guides etc.

Roles & Responsibilities Review technical inputs/ data received from customer for adequacy. Resolve technical queries related to product design Carry out design calculations and detailed engineering and make proposal. Plan design activities in consultation with Design manager Plan all product drawings as per sales order Review relevant design outputs (drawings) for adequacy Co-ordinate design review. Ensure that all designing, and development requirements (Plan/ Input/ Review/ Verification/ Validation/ Change control) are effectively met. Act as an interface between customer/ sales team and internal departments. Ensure control over relevant documents as applicable. Visit customer sites when required.

Role & responsibilities Work closely with clients to create designs, conducting design calculations and selecting the right equipment and systems for installation. Carry out detailed engineering design for piped water supply and both above and below ground drainage, including the preparation of layouts, schematics, and details. Perform engineering design for public health and fire protection services, which involves preparing layouts, schematics, schedules, specifications, and details. Draft technical schedules and specifications. Organize and manage BIM documentation for design work. Act as a representative for the discipline during client meetings. Ensure that service and project work is completed within the agreed deadlines and budget. Make sure that appropriate service and design decisions are made. Prepare briefing documentation for water, drainage, and fire protection to facilitate outsourcing the design to approved delivery suppliers. Review design information from a delivery perspective to ensure it meets the requirements outlined in the briefing documentation. Has the ability to critically assess building services documentation (drawings, calculations, and specifications) at all design stages, from concept to construction documentation, and provide valuable design input and guidance. Demonstrate proficiency in designing sustainable plumbing and fire protection systems, including a solid understanding of hydraulics, piping systems, pumps, and equipment. Collaborate with other disciplines to ensure project coordination and timely delivery. Supervise junior engineering staff and provide training as needed to ensure that each project meets the required standards. Preferred candidate profile 4-8 years' experience in building services design engineering in LOCAL PROJECTS Bachelors degree or Masters degree in relevant subject. Experience in public health and fire protection designing is a must Ability to accept a high degree of responsibility in a team-based organisation, combined with ability to work independently. Working knowledge and understanding of Indian standards. Broad building design knowledge, from working on a wide range of projects. Excel skills (a detailed understanding including the use of macros). Although mechanically biased it is expected that you will have a good understanding of electrical concepts and their impact upon the overall project. Ideally also showing an awareness of other key design team members such as architects, structural and civil engineers. Perks and benefits Competitive salary and benefits package including Annual Discretionary Bonus, Comprehensive Health Insurance Scheme for both you and your family, Group Personal Accident Cover Our 5-day workweek policy supports work-life balance, ensuring you have time to relax and recharge. An International Culture that wherever your career takes you at Buro Happold, you wont be far from the exceptional Engage with our vibrant community through the Young Employees Forum, Diversity and Inclusion Forum, and BH Women's Network, fostering a supportive and diverse workplace culture

Role & responsibilities Undertaking detailed mechanical engineering design Preparing technical schedules. Planning and managing CAD documentation of design work. Monitoring performance of Technician (as appropriate). Under guidance of senior staff, representing Buro Happold at meetings with the client, other professionals and suppliers. Ensuring service and project work are carried out within agreed deadlines and within budget. Ensuring senior staff are kept informed of important and relevant service/design decisions and the objectives of the company and the client are achieved. Mentoring and assisting Graduate Engineers Preferred candidate profile 3-8 years' experience in mechanical engineering within an MEP Consultancy environment. Ability to accept a high degree of responsibility in a team-based organisation, combined with ability to work independently. Broad building design knowledge, from working on a wide range of projects. Excel skills (a detailed understanding including the use of macros). Although mechanically biased it is expected that you will have a good understanding of electrical concepts and their impact upon the overall project. Ideally also showing an awareness of other key design team members such as architects, structural and civil engineers. Knowledge of AutoCAD, Revit, IES, and Hevacomp software Bachelors degree in mechanical engineering from a reputed institute Perks and benefits Competitive salary and benefits package including Annual Discretionary Bonus, Comprehensive Health Insurance Scheme for both you and your family, Group Personal Accident Cover Our 5-day workweek policy supports work-life balance, ensuring you have time to relax and recharge. An International Culture that wherever your career takes you at Buro Happold, you wont be far from the exceptional Engage with our vibrant community through the Young Employees Forum, Diversity and Inclusion Forum, and BH Women's Network, fostering a supportive and diverse workplace culture

Role Description Working within our Design & Engineering teams, you'll create some of the worlds most iconic and ground-breaking structures and spaces that transform the world around us, from making journeys easier to opening up public places that bring people together. The role sits within our Resilience Global Business Area. We work to protect our natural environment and water resources, while powering our world for future generations. Around the world, were feeling the effects climate change, rapid urbanization, loss of biodiversity. The rate at which were seeing large-scale, unforeseen events such as floods and wildfires, is becoming more frequent. We are here to protect our natural environment and water resources, while powering our world for future generations. Role Accountabilities Leads a team of electrical protection & control engineers. Deliver multiple complex projects and manage client relationships. Estimating, scheduling & planning project deliverables. Collaboration with other design disciplines for capturing all the design interfaces. Leading & guiding team on engineering activities for variety of energy transition projects. Identify & create opportunities to implement new approaches to achieve time & cost savings. Understanding & preparation of design basis reports and design calculations. Understanding project specification & client requirement. QA/QC for in-house designs and those by external contractors. Advising on design and design change issues. Undertake site visits / non-intrusive surveys as required as part of the design activities or as part of site support. Risks identification assessment and management. Liaison with global team to understand & produce effective design solution. Be conversant with industry standards & latest technology available. Enhancing team capabilities. Qualifications & Experience BE / B-tech Electrical/Electronics/ Power Engineering. Or ME/ M-tech Electrical/Electronics/ Power Engineering At least 12 years experience in designing & execution of Power System Automation projects. Conversant in with key documentation like GA, Scheme, Wiring Diagram, SLD, Keyline diagram, trip matrix, Bill of quantity, Wiring Schedule, Cable schedule, FDS, Signal list, Architecture drawing, CT/VT dimensioning, Battery sizing, CT Saturation calculations, Protection system Coordination, Heat load calculations etc. Expertise in Protection & Control Relay settings parameterization for reputed Makes Like SEL, GE, SIEMENS etc. Worked with Internal and external parties, e.g., equipment suppliers, manufacturers, service providers, Professional bodies. Understanding & developing elementary documents & drawings for Busbar, Feeder, Transformer, Reactor, OHL, FACTS & HVDC Protection and SCADA for AIS & GIS. IEC61850 communication protocol-based Automation Projects. Computer-based engineering Tools e.g. ASPEN One-liner, PS CAD and ETAP etc. Communicating & advising on complex technical issues & its associated commercial aspects to peers & senior management. Construction and Design Management (CDM). Professional registration with any leading engineering body is preferred.

Solid Edge Soft, Review,approve or modify Machine designs.Check technical accuracy Mechanical calculations, detail drawing,3d Design,Develops Design as per customer requirements, Heavy Machine design Experience Must, selection of motor,gear,cylinder Required Candidate profile Experience in field of heavy machinery design , Press machine, extruder, rubber processing machinery etc.Machine Development and Design Experience,using Right Engineering Calculations, Team Handle.

Strong Mechanical Design Engineer Qualification: B.E/M.Tech in Mechanical Experience: 3 to 5Years Skills: Strong in Machine Design / R&D Design experience Capable to own the project delivery completely (from concept to release) Good Knowledge on Material Selection, Machining and Fabrication process and post processing operations. Thorough knowledge in calculations to define structures/loads, choose the right OEMs and its accessories in the market. Example Linear Guides, Motors, gearbox, bearings, etc. Pro-efficient in Sheet metal design Good knowledge on using sheet metal applications wherever necessary. Pro-efficient in creating manufacturing drawings, defining tolerances with GD&T Pro-efficient in UG-NX is a must Knowledge in Structural Analysis Awareness on Manufacturing techniques Good Presentation and Negotiation Skills Semiconductor & Special Purpose Machine Industry background is added advantage

JOB BRIEF This position requires the ability to work efficiently under minimal supervision, exercising initiative and independent judgment in the performance of assigned tasks and assisting in the Product engineering- Product design, Weldment Structures frame, Sheet metal modelling and Jigs & Fixtures. This position reports directly to the Engineering Manager and will also work in cooperation with the sales and marketing managers, as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: Use Solidworks to generate 3D modelling and detailing of any Mechanical products Weldments, Sheet metals. Responsible Jig and Fixture design development. Responsible for product design and development with applicable codes & standards. Responsible for preparing GA drawing and Fabrication drawing with BOM. Attention to detail and commitment to quality a must in reviewing, checking and clash checking other designer’s work. Prepare material take-offs for cost estimates and material procurement during concept and basis of design phases. Work with domestic and international teams to develop and support products. Update engineering manager with regular reporting of progress and status. REQUIREMENTS AND SKILLS Bachelor’s in Mechanical/Aeronautical engineering with 7+ years of experience. Extensive experience with Solidworks is MUST. Hands on experience in 3D modelling of Weldments, Sheet metals is must. Knowledgeable in Autodesk Inventor. Exposure to international codes and standards. Strong attention to detail Works independently and with minimal supervision Experience from Design engineering firms, preferred. Excellent organizational and communication skills is must. Proficient in Microsoft Office software

Design new products, modify existing designs, develop calculation tools, test procedures, solve problems, run/verify calculations, perform project specification reviews, perform design reviews, verify standards and manuals, and conduct meetings. Resolves problems using solutions that involve new techniques, technologies, or concepts. Maintains a working knowledge of new technologies which may improve products and develops recommendations accordingly. Upgrading the design standards, design rules and design calculations based on lessons learnt and feedback. Design and manufacturing review with sales and operations. Prepare design (hand) calculations for the design development/ evaluation. Manufacturing and field service support during assembly / commissioning. Make innovative changes in the existing product for improvements and easy manufacture Provide error free and timely designs and engineering outputs. Prepare the design documents and operation and maintenance manuals for the new product. Attend meetings and conferences to develop knowledge and skills. Discuss with vendors and understand their process/technology and implement in the product. Work with all IMI locations worldwide to understand the identified product, and its design and engineering requirements.

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience • 1-4 years of experience in relevant design discipline • Experience in engineering packages Qualification • Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Role & responsibilities Tool - Ugnx or Solidworks with experience in gearbox design. Skill Requirements : 2 to 9years experience These tasks are foundational and involve intermediate skill requirements for efficient execution. 1. Operating Manuals and Job Instructions: Preparation and regular updates to ensure adherence to procedures. 2. Data Compilation and Formatting: Collecting and organizing data into the required formats. 3. Part Drawings: Developing or updating drawings for basic components. 4. 3D Conversions: Converting 2D drawings into 3D models. 5. Scan to 2D Conversions: Transforming scanned images into precise 2D technical drawings. 6. New Housing Drawings from Existing Drawings: Creating housing designs based on established templates. 7. Material Code Creation . Interested candidate can share their resume to Sulochana@harita.co.in

Role & responsibilities Tool - Ugnx or Solidworks with experience in gearbox design. Skill Requirements : 2 to 9years experience These tasks are foundational and involve intermediate skill requirements for efficient execution. 1. Operating Manuals and Job Instructions: Preparation and regular updates to ensure adherence to procedures. 2. Data Compilation and Formatting: Collecting and organizing data into the required formats. 3. Part Drawings: Developing or updating drawings for basic components. 4. 3D Conversions: Converting 2D drawings into 3D models. 5. Scan to 2D Conversions: Transforming scanned images into precise 2D technical drawings. 6. New Housing Drawings from Existing Drawings: Creating housing designs based on established templates. 7. Material Code Creation . Interested candidate can share their resume to a.madhumathi@harita.co.in

Minimum 3-4 years of relevant experience in building robust and scalable design Proficiency in UX design tools such as Figma, Sketch, Adobe XD, or InVision for creating wireframes, prototypes, and user flows. Ability to create and interpret personas, user journey maps, and task analysis to inform design decisions. Proficiency in designing intuitive, accessible, and responsive interfaces that comply with WCAG accessibility standards.

Job Overview: We are seeking a highly skilled and experienced Design Manager to lead the design and development of railway products and components, including rolling stock, railway equipment, and infrastructure-related systems. The ideal candidate will manage a team of designers and engineers, oversee design processes, ensure compliance with railway standards, and collaborate with cross-functional departments to deliver innovative and reliable solutions for the railway sector. Key Responsibilities: Lead and manage the entire design lifecycle of railway products from concept to production. Coordinate with R&D, production, quality, and procurement teams to ensure design feasibility and manufacturability. Develop 2D/3D CAD models, engineering drawings, and detailed technical documentation. Ensure compliance with Indian Railways (RDSO) and international railway standards. Conduct design reviews and validation processes including FEA, simulations, and prototyping. Manage and mentor a team of design engineers and draftsmen. Review customer specifications and prepare technical proposals. Ensure timely delivery of design projects while maintaining quality and cost efficiency. Drive innovation in product design, material use, and manufacturing processes. Liaise with clients, vendors, and certification bodies as required. Key Skills & Competencies: Expertise in CAD software (e.g., AutoCAD, SolidWorks, CATIA, Creo). Strong understanding of railway design codes (RDSO, UIC, EN, AAR, etc.). Project management and team leadership skills. Knowledge of manufacturing processes (fabrication, machining, assembly). Familiarity with FEA and simulation tools. Attention to detail with excellent analytical and problem-solving skills. Effective verbal and written communication. Qualifications & Experience: Bachelor’s or Master’s degree in Mechanical Engineering, Industrial Design, or related field. 8–12 years of experience in mechanical/product design, preferably in the railway or heavy engineering sector. Prior experience managing a design team is required. Experience with Indian Railways or PSU projects is a strong advantage. Preferred Traits: Familiarity with ISO, IRIS, and other quality management systems. Exposure to digital engineering tools and PLM systems. Passion for railways and public infrastructure innovation.

Prepare and send client drawing & GTP for Link Box and Cable cleats Co-ordinate with client on request received for revised drawing & GTP Discuss queries with client Prepare new drawing & GTP of Link box and Cable cleats as per new requirement. Required Candidate profile Prepare and send QAP of Link Box Enter 60-90 Nylon cleat FG stock at the time of dispatch Submit vendor approval form and other technical documents to client in case of emergency.

Meinhardt is urgently looking for an experienced Senior Plumbing & Firefighting Engineer with minimum 10 years of experience in Railways, Airports, Hospital sector project, etc. Required Candidate profile Should have ability to lead project team, coordinate among different disciplines and ensure timely and quality delivery, Proficient in industry standard design software's such as AutoCAD, Revit, etc.

Responsible for engineering, design, and modification activities related to mechanical equipment, vessels and tanks and piping systems including equipment and piping specifications and procurement. May be involved with the support of installation and operation & maintenance of equipment. Discipline concerning air conditioning, refrigeration, ventilation, combustion, heat transfer, energy, power, fuels, propulsion, machinery, tools, manufacturing, fluids, plumbing, fire suppression systems and devices, water supplies and pumping systems for fire protection. Discipline covers the ability to solve problems that deliver and optimise safe, sustainable and ethical solutions for the design, production and operation of devices, machines, structures, processes and systems involving mechanical elements. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Knowledge Independently analyzes and applies solutions to challenging issues within the area of expertise by applying critical thinking Analyzes and applies solutions to atypical and/or challenging issues within the area of expertise using standard operating procedures/methodologies Engineering experience that provides knowledge and exposure to fundamental theories, principles and concepts Demonstrated experience using AutoCAD, Revit and Navisworks skills. Good written and verbal communication skills. Prepares project deliverables that are reviewed by senior team members Continues to grow knowledge of the organization, customers, and processes Technical Excellence Identifies incremental improvements to existing procedures or processes that increase efficiency or work quality Performs a self-check of work products prior to submitting them to others. Leadership Works independently and collaboratively with a lesser level of guidance needed for unfamiliar tasks Provides regular updates to the manager on project/assignment status May assist more junior staff members with aspects of their job and may coordinate activities of a small team. Qualifications Minimum Bachelor's Degree in Mechanical Engineering (with minimum 10years experience) or Equivalent and specialising in HVAC Design. He/She should be well versed with ASHRAE/CIBSE/NFPA. He/She should have experience in commercial, residential, datacentre, and infrastructure projects from different geographies - USA, Canada, ANZ Region. Experienced Senior Mechanical Engineer - Specialized in HVAC Design. Should be capable of leading the discussions with the Client and lead projects for the HVAC Disciplines. Should be able to take Design decisions independently.

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation and operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Qualifications Minimum Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Healthcare design experience required Overall 13+ years of work experience is preferred.

This position requires leading track designs by example primarily in Australia and New Zealand region and will need a combination of hands-on track design, design checking, mentoring, and training other team members. Primary KPI is to increase repeat work from ANZ through sustained high-quality deliverables. Lead in the production of track designs and provision of technical support throughout to support all stages of the design process (Feasibility through to Construction) in both Plain Line and S&C, especially in the ANZ region. Independently deliver / manage the production of design deliverables in accordance with client requirements Acts as a Senior technical resource and serve as technical advisor and/or mentor for lesser experienced team members. Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high-quality cost-effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component. Performs quality control review of design calculations, Models, or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Agility in the face of dynamic project stages. This position may also be leading similar designs in other global regions if required. Qualifications Master of Engineering degree or Bachelor degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Washington Accord accredited preferred. Registered Practicing Engineer - Victoria (RPEV), (RPEQ), or eligible for qualification or working towards. 12+ Years of Track Design experience in both greenfield and brownfield projects with substantial experience in Australian or New Zealand Projects. Prior or current experience in gauging as per ESC215 in New South Wales is mandatory. Proficiency in Power Rail Track, Microstation mandatory. Open Rail Designer preferred. Extensive experience and Technical Proficiency in Plain Line and Switches & Crossings mandatory, preferably in ANZ region. Experience with earthworks, including cut and fill modelling and quantity estimation. Solid understanding of Australian Track Design including interpretation of Standards and application of SiD, HSE regulations. Solid understanding of track construction methods, stageworks of projects, Way components and surveys in Australian region. Working knowledge of AMB standards and requirements Demonstrated ability to author technical reports. Demonstrated ability to present their work and represent their colleagues on the project in presentations and meetings. Technical quality of deliverables undertaking checks of design deliverables completed by team members in accordance with company procedures. Timely delivery in accordance with design programmes. Experience of Attendance at technical design reviews including Design and Construction Interface meetings and Interdisciplinary Design Checks to present Track design. Keep up to date with industry best practices and where appropriate apply best practices within the project team environment.

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 8+ years of work experience is preferred. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) for Transmission Line Electrical design is highly desirable Exposure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with Secondary Design for HV, MV Substations and Transmission Lines is preferable. Chartership or Fellowship with IET or equivalent is desirable Very good communication skills (Oral and Written) in English language is mandatory

Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements.

Responsible for engineering, design, and modification activities related to mechanical equipment, vessels and tanks and piping systems including equipment and piping specifications and procurement. May be involved with the support of installation and operation & maintenance of equipment. Discipline concerning air conditioning, refrigeration, ventilation, combustion, heat transfer, energy, power, fuels, propulsion, machinery, tools, manufacturing, fluids, plumbing, fire suppression systems and devices, water supplies and pumping systems for fire protection. Discipline covers the ability to solve problems that deliver and optimise safe, sustainable and ethical solutions for the design, production and operation of devices, machines, structures, processes and systems involving mechanical elements. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Technical Excellence Identifies incremental improvements to existing procedures or processes that increase efficiency or work quality Performs a self-check of work products prior to submitting them to others. Leadership Works independently and collaboratively with a lesser level of guidance needed for unfamiliar tasks Provides regular updates to the manager on project/assignment status May assist more junior staff members with aspects of their job and may coordinate activities of a small team. Qualifications Minimum Minimum Bachelor's Degree in Mechanical Engineering (with minimum 10years experience) or Equivalent and specialising in HVAC Design. He/She should be well versed with ASHRAE/CIBSE/NFPA. He/She should have experience in commercial, residential, datacentre, and infrastructure projects from different geographies - USA, Canada, ANZ Region. Experienced Senior Mechanical Engineer - Specialized in HVAC Design. Should be capable of leading the discussions with the Client and lead projects for the HVAC Disciplines. Should be able to take Design decisions independently. Energy Modelling , Building Performance analysis & IES Software skills listed in detail below. Utilize the energy modelling software like IES VE to simulate the building performance and energy consumption Analyze the data received from client and data from energy results and provide the best energy efficient solutions to tam Collaborate with the multidisciplinary teams for various inputs and outputs to do the efficient design process Ability to work on Cooling/Heating loads, Energy consumption and building performance in IES VE or any other modelling software Familiarity with ASHRAE 90.1, 62.1, 55 and CIBSE requirement Knowledge of Mechanical system architecture and components

Responsible for engineering design and modification activities related to electrical & electronic circuits, systems, and equipment. May involve the installation, operation & maintenance of electrical systems and equipment. Discipline concerning power systems, electronic and transmission equipment, electric service and supply systems, lighting systems, communication service and supply systems, fire alarm and detection systems, control systems or electrical installations. An electrical engineer focuses on designing, maintaining and improving products that are powered by or produce electricity. Electrical engineering deals with electricity, electro-magnetism and electronics. It also covers power, control systems, telecommunications and signal processing. These engineers are usually concerned with large-scale electrical systems such as motor control and power transmission, as well as utilizing electricity to transmit energy. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Electrical Engineers, UK) Minimum Overall 8+ years of work experience is preferred. Prior experience in leading large design engineering teams performing Grid Substation design in a global consultancy firm is preferred. Experience on HV Plant Design for large EHV Grid Substations is mandatory. Previous experience in design teams working for Grid Utilities (for e.g., National Grid, Transgrid, Powergrid etc.,) is highly desirable Expsoure to International standards (IEC, IEEE, ANSI, Australian Standards and Middle East region codes and standards) is preferred Previous design experience working with GIS and AIS EHV substation HV Plant Primary design is preferable Chartership or Fellowship with IET or equivalent is highly preferable Very good communication skills (Oral and Written) in English language is mandatory

Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise Develops study and design procedures to facilitate high quality cost effective work by others Participates in interdisciplinary review of project deliverables Develops construction cost estimates and estimates of technical efforts for projects Uses expertise in all steps of completing discipline component of PS&E package Performs quality control review of design calculations or drawings Prepares technical specification sections Provides input to the development of engineering budget and schedule to meet requirements Leads and mentors junior engineers and technicians in electrical design principles and best practices Collaborates with cross-functional teams to integrate electrical systems with other engineering disciplines Develops and implements innovative solutions to complex electrical engineering challenges Ensures compliance with relevant electrical codes, standards, and regulations Conducts feasibility studies and risk assessments for new electrical design projects Represents the company in technical forums and industry conferences related to electrical engineering Qualifications Minimum BA/BS in Electrical Engineering + 10YORE or demonstrated equivalency of experience and/or education Professional Engineering (PE) license in Electrical Engineering Extensive experience in electrical system design, including power distribution, lighting, and control systems Proficiency in electrical design software such as AutoCAD Electrical, ETAP, or similar tools Strong knowledge of National Electrical Code (NEC) and other relevant industry standards Demonstrated leadership experience in managing complex electrical engineering projects Excellent problem-solving and analytical skills Strong communication and interpersonal skills, with the ability to work effectively in cross-functional teams Experience in developing and reviewing technical specifications and construction documents Familiarity with energy-efficient design principles and sustainable engineering practices Ability to mentor and guide junior engineers and technicians Preferred Qualifications Master's degree in Electrical Engineering or related field Additional certifications such as LEED AP, CEM, or PMP Experience with Building Information Modeling (BIM) software Knowledge of emerging technologies in electrical engineering, such as smart grid systems or renewable energy integration

Preparation of structural calculation reports, design calculations using Excel and other in-house software, and analysis of load transfer mechanisms. Excellent technical skills in the design for Concrete and steel structures. Coordinate and collaborate effectively with the other disciplines. Leading a team of engineers and CAD technicians as per project requirements Able to provide technical support to the project team and managing the projects independently. Experience in complete life cycle of a design project within Water and Wastewater environment Strong problem-solving skills, with the ability to propose alternative solutions for encountered issues. Familiarity with international codes, including Eurocodes, American codes, Australian standards, and British Code of practices. Able to work effectively in a diverse team spread across various geographical locations. Familiarity with various software packages, ideally including MIDAS, Autodesk Robot, STAAD Pro, ETABS, and SAFE, with a preference for experience in Finite Element Analysis. Strong understanding of safety in design and related practices Performs and ensures quality control reviews of design calculations and drawings. Excellent written and verbal communication skills. Flexible to adopt new challenging tasks as per business requirements. Working towards Chartered Engineer (CEng) status will be advantageous. Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. Working towards Chartered Engineer (CEng), or Professional Engineer (PE) license or equivalent in the relevant field from any global organization (e.g., Institution of Civil Engineers, UK). 7 to 12 years of experience as a structural design engineer, preferably with a focus on water and wastewater-related design projects.