229 Instrumentation Maintenance Jobs

Lead & develop instrumentation team to support O&M & projects Oversee the design, specification, Approvals & installation of instrumentation like CV, XV, FT, TT, LT, PT & LS Review documents P&IDs, instrument index, loop diagrams & JB schedules

We are looking for Engineer for Instrumentation Department for Caustic Soda Plant at Dahej. The candidate having good experience in Chlor-Alkali / Chemical Plants. Type of Employment : On Roll (Priserve) Plant Location : Dahej, Bharuch (Gujarat) Project Site : GNAL (GACL+NALCO) Caustic Soda Plant Job Description: 1. Position : Shift Engineer - Instrumentation Qualification : BE/ B.Tech (Instrument) Experience : Mini. 3 year of experience in Continuous process plant 2. Position : Section Engineer - Instrumentation Qualification : BE/ B.Tech (Instrument) Experience : Mini. 7 year of experience in Continuous process plant * Immediate joiner will be preferred Please share this Job Opening with your friends & juniors who are searching the job for the same. Interested candidate can share his Updated CV with below detail on the mail id hr_siteoffice3@priserveinfra.com 1. Total Experience 2. Current CTC & monthly In hand salary 3. Expected CTC 4. Notice Period

* Install, calibrate, and maintain field instruments pressure, temperature, flow, level, * Troubleshoot and repair faulty instruments and control loops. P&IDs wiring diagrams. . Required Candidate profile * maintenance of PLCs &DCS systems. * Maintain accurate records of maintenance calibrations and repairs.

Role Erection and Commissioning of Instruments, Loop checking, troubleshooting & calibration. Inspection and witness of Instruments and control system If Interested pls share CV on careers@nglfinechem.com

Role & responsibilities 1. Knowledge of Operation and Maintenance of Residential site (Educational), which includes 33 KV HT line, 33 KV Substation, 1500 KVA HT DG, 62 KVA LT DG, HT Breaker, LT Breaker, Protection Relays, Transformers, Air Handling Units, Chiller Plant, STP Plant, Solar Plant, RO Plant, Fire Alarm System, CCTV, Water softener unit, Lifts, plumbing, Electrical, Mechanical, instrumentation, underground services & HVAC. 2. Liaison with Electricity Board, Electrical Inspector, Fire office, RIICO and other government agencies for smooth operation of campus. 3. Conversant with Project activity including Tendring, selection of vendor, Project execution, Commissioning and handing over of site. Soft Skills: Updating of maintenance record, technical records, AMC records, Budget, CAPEX, Project tenders, Vendor selection, Site handling, conflict resolution, technical issue resolution, Disaster Management, Computer Knowledge, MS word, MS Excel, MS Presentation.

To manage Installation, Commissioning, Preventive maintenance and Corrective Maintenance of Positive Displacement pump, Centrifugal Pump, Valves and packing equipment etc.

Skills Instrumentation troubleshooting Preventive maintenance Equipment inspection Calibration of instruments PLC programming Control system analysis Technical documentation Safety procedures knowledge Job Description PURPOSE OF THE ROLE To perform workshop services and job planning related to applicable instrumentation system maintenance activities at site in order to ensure seamless and smooth operations while adhering to statutory compliance and organisation's policies SUCCESS METRICS (TOP 3-5 KPI's) - Statutory compliance of resampling of legal metrology act in iRCMS system - Completion of the workshop jobs as per planning - Compliance to HSEF trainings and targets OPERATING NETWORK Internal: - Human Resource, Administration, Workshop, Planning, Security, Plants Maintenance etc. External: - Vendor, Equipment Manufacturers, Service Engineers, Contractors, etc. KNOWLEDGE AND COMPETENCIES Education Qualifications A Bachelor's degree in Engineering/ Technology (Instrumentation/ Electronics stream) or a Master's degree in Engineering/ Technology (Instrumentation/ Electronics stream) (Preferred) Experience (Must Have & Good to Have) - Up to 3-5 years of experience for degree in industrial / Instrument workshop maintenance field -Two years hands on experience is preferred Functional / Behavioral competencies required to execute the role Functional Competencies - Knowledge of various codes and standards - Domain Knowledge of Instrumentation Engineering - Instrumentation workshop practices

1. Calibration Activities: Perform scheduled calibration of instruments such as pressure gauges, temperature sensors, RTDs, pressure transmitters, differential pressure gauges, flow meters, etc. Maintain calibration records as per SOPs and regulatory guidelines. Ensure traceability of calibration standards to national/international standards. Coordinate with external agencies for calibration of master instruments and maintain certificates. 2. Instrumentation Maintenance: Routine maintenance and breakdown troubleshooting of process instruments and control systems in sterile areas (e.g., autoclaves, VHP systems, HVAC systems, SCADA/BMS). Assist in preventive maintenance of equipment as per schedule. Support qualification and validation activities related to instrumentation. 3. Documentation & Compliance: Ensure all activities are performed and documented as per GDP/cGMP. Maintain instrument history cards, calibration schedules, deviation reports, and change control records. Support audit preparedness (internal, external, regulatory). 4. Project Support & Installation: Assist in installation, commissioning, and qualification (IQ/OQ/PQ) of new instruments and systems. Support in execution of engineering change controls for instrumentation. 5. Safety & Training: Follow safety protocols while working in sterile and hazardous areas. Participate in internal trainings related to instrumentation and GMP. Key Skills and Competencies: Sound knowledge of calibration procedures and instrumentation in sterile/injectable environments- Practitioner. Familiar with regulatory requirements (USFDA, EU GMP, WHO GMP, etc.)-Practitioner Hands-on experience with PLCs, SCADA, and Building Management Systems (BMS)-Practitioner. Good documentation and communication skills-Practitioner. Attention to detail and proactive problem-solving-Practitioner.

Industry: Solar Panel Manufacturing Position: Production Operator ITI / Diploma / BE in Electrical or Mechanical OR Fitter trade Gender: Male only Department: Production Salary: 15,000 fixed Working Hours: 12 Hours Shift (8:30 AM – 8:30 PM) Required Candidate profile Location: Olpad, Surat Room accommodation 1-time free food Local transport: Provided from Olpad to plant MO NO : 90816 88100 /+91 90816 99400/+91 90816 99500/+91 90816 99200

KOC-SK Maintenance - Diploma/ITI with 5 years above in installation and maintenance and repair of different types of analyzer. Interview Cochin/Mumbai/Baroda/Chennai. Apply: arvindhrjobs@gmail.com - WhatsApp:9072244333. Required Candidate profile Diploma in Instrumentation/ Electronics Engg. or +2 & ITI, 10 Yrs Exp. in maintenance + 1 Year Exp. In Maximo. Apply: arvindhrjobs@gmail.com. 9072244333. Interview at: Cochin/Mumbai/Baroda/Chennai. Perks and benefits Food/Allowance + Transportation & Accommodation.

You will be joining TEZ ENGINEERING & INFRASTRUCTURES PRIV LIMITED as a full-time C&I Technical professional based in Talwandi Sabo, Punjab, India. Your primary responsibility will be to oversee and manage control and instrumentation tasks. This includes designing, developing, and maintaining control systems while ensuring adherence to industry standards. You will work closely with other engineering teams to meet project objectives, conduct inspections, troubleshoot issues, and guarantee timely completion within allocated budgets. To excel in this role, you must possess expertise in Control Systems Design and Development, Instrumentation Maintenance, and Troubleshooting. Familiarity with industry standards and a track record of compliance is essential. You should have a keen eye for detail to perform inspections and quality checks effectively. Strong problem-solving abilities, analytical skills, and excellent communication and collaboration skills are also required. A Bachelor's degree in Engineering or a related field is necessary, and any prior experience in the construction or engineering sector would be advantageous.,

Electrical & Instrumentation Job description Complete study of contract documents and applicable standards for instruments. Review of various engineering documents like Technical specifications, Data sheets, I/O checklist, Loop details, Interlock schemes, Control room layout, cable schedules, marshalling racks, cable routing, grounding, hardware console, system cabinets, Human Machine Interface (HMI) stations etc Devising instrument layout drawings, wiring drawings, junction box schedule and cable trench layouts. Framing installation hookups and cable interconnection drawings. Selecting control Instruments, handling enquiry specification preparation and selecting instruments based on type of application. Reviewing of Vendor documents and follow ups. Data collection at site for the basic engineering (ESD & DCS Architecture detail collection, existing ESD Auxiliary console loop drawing, ESD Auxiliary Console Internal Wiring Drawings, Marshalling cabinet wirings, C&E drawings Attended and witnessed I/A DCS graphic dynamic testing at vendor testing facilities Active participation in the Factory Acceptance Test (FAT) for DCS & ESD system at vendor premises Overall co-ordination with vendor and other sub-contractors Installation & Commissioning Ensured instrument equipment works complied with project specifications, company procedures, method statements and quality assurance and controls documentation. Supervised and monitoring the flow of inspection on-site and calibration prior to meet the project deadline. Tasks to monitor all subcontractor activity prior for deadline start of Instrumentation Workload. Assigned to witnessing for calibration of instrumentation, commissioning of the following equipment: Smart Flow, pressure, temperature, level transmitters, different control valves, pressure gauges and Fire & Gas alarms. Transferring & Commissioning of loops includes thorough study and understanding of the process, checking of the Logic for interlocks, Verifying Cause and Effects, and proper pre- planned preparations to ensure completion of Transfer within given deadline. Efficiently Handled Transferring of Critical loops and commissioning them without affecting the process with proper precautions. Preparation of test equipment, consumables, tools and technicians to execute commissioning work at fabrication site including instrument calibration, loop check and function test, stroking control valve, shutdown valve and blow down valve, pop test for pressure relief valve. Checking the integrity of the field packages regarding communications as they were commissioned and incorporated into the main DCS and ESD systems. Execute the OTP for process related packages and utilities systems. Commissioning Assistance to vendor related process and utilities packages. Reviewing of DCS and ESD software modification during commissioning activities Roles and Responsibilities If you are interested kindly send their updated resume on this id hrjobsconsultacy2020@gmail.com & call for more details at 8700311618

KOC Maintenance - 10 years experience in Oil & Gas maintenance out of 3 years as supervisor. Manage a team of Technicians and co-ordinate with engineers. Interview Cochin/Mumbai/Baroda/Chennai. Apply: arvindhrjobs@gmail.com - WhatsApp:9072244333. Required Candidate profile Diploma in Instrumentation/ Electronics Engg. or +2 & ITI, 10 Yrs Exp. in maintenance + 1 Year Exp. In Maximo. Apply: arvindhrjobs@gmail.com. 9072244333. Interview at: Cochin/Mumbai/Baroda/Chennai. Perks and benefits Food/Allowance + Transportation & Accommodation.

Erection, commissioning & Maintenance of Field Instruments e.g. Transmitters (pressure, Temp, DP, level switch, smoke detectors, rtd, hd, MOV, ROV, TT, UVIR, HCD)Troubleshooting on commissioning OF ups and battery bank Required Candidate profile INSTALLATION, TESTING AND COMMISSIONING OF HT & LT/LV POWER PANELS, DISTRIBUTION TRANSFORMER, LIGHTING , BATTERY CHARGER, DRY BATTERY BANK, UPS, HT & LT MOTORS, MOTOR OPERATED...

How will you CONTRIBUTE and GROW? The Maintenance Engineer-Instrumentation is responsible for maintaining safety, reliability and efficiency of his primary plant through strict implementation of maintenance plan in adherence with AL guidelines. The role mainly consists of minimizing downtime of the plant by implementing the defined PM plan as per group guidelines and approved by CRT and maintaining strict adherence to the same. He is also responsible for maintaining reliability and availability in his /her function in the plant as per AL group standard within the allocated maintenance budget. Proposing initiatives that will contribute to improvement in reliability of the facility and implementing them once they are validated by Maintenance In-charge and CRT functional experts and approved by the CRT Manager is part of his role as well. He /she has operational reporting to the Maintenance In-Charge and functional reporting to the CRT Functional Lead of AL India. The Maintenance Engineer-Instrumentation main contribution and accountabilities will be: 1. Prepare annual maintenance plan (PM plan and turnaround) for Instrumentation based on historical performance, vendor manuals, AL group guidelines, submit to Maintenance In-charge for approval process. 2. Implement the approved maintenance plan and ensure that there is no sli page. Submit the non compliance to Maintenance In-charge for validation process. 3. Prepare a monthly report on maintenance activities for Instrumentation and submit to Maintenance In-charge and respective Functional Lead in Central Reliability Team. 4. Perform RCA for the technical & safety incidents and take corrective actions to prevent reoccurrence. Coordinate with vendors for resolution if required. 5. Prepare annual maintenance budget for Instrumentation, get it reviewed byFunctional Manager, initiate timely purchases and keep the expenditure under control. 6. Prepare TAR plan for Instrumentation, list of spare parts for procurement (based on SPM selection matrix, OEM recommendation and VS study), ensure timely availability of spares to perform PM and TAR maintenance. 7. Raise and track GWSR; raise an alert to Maintenance In-charge for any delay in procurement process. 8. Participate in quarterly maintenance audits conducted by CRT and close audit non conformities in definite time. Maintain audit finding reports and implement the improvement plan under the guidance of Maintenance In-charge. 9. Actively participate in implementation of special projects launched by CRT on a time to time basis. ___________________ Are you a MATCH? Education: Diploma or B.Tech in Instrumentation and Control. Work Experience: 5 to 6 years experience in maintenance in industrial operations in Instrumentation Engineering. Language & Culture: Intermediate English is preferable and the ability to excel in a fast-paced, multicultural environment. Fluent Hindi is preferable. Communication & Influence: Strong technical and communication skills Strong analytical and problem-solving capabilities Ability to work on M.S. Office. Ability to handle technical tasks independently. Our Differences make our Performance At Air Liquide, we are committed to build a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their background. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world.

ROLES & RESPONSIBILITIES: Develop instrumentation analysis, histories, etc. and ensure the provision of proper records of all works done according to standard engineering / company practice requirements. Responsible for designing, developing, installing, managing and/or maintaining instrumentation which is used to monitor and control engineering systems, machinery and processes. Designs instrumentation systemsfor plant expansions, including the development of field and control room instrumentation specifications. Designs and implements online analyzers by determining the plant requirements, developing specifications, installing the analyzers, and evaluating the impact. To carry-out Failure Analysis for Instrument& systems failuresand to bring effectiveness in the maintenance by suggest / implement remedial actions. To eliminate repetitive failures through case study & root-cause analysis & reliability improvement plan of instrumentation. Review all control system spares,works on optimization and consolidations of all systems, spares and provide technical support to the field instrument staff to implement the same. Study and plan a preventive maintenance schedule and prepare a detail procedure as per vendor recommendations, prepare a strategy and procedure to schedule maintenance during plant shut down on the systems. Carryout troubleshooting, monitor equipments performance; contributes to the design and review of modifications proposals to utilize unexplored capabilities of the system. Reviews all materials, manpower and contract labours to ensure day-to-day maintenance, preventative maintenance and turnaround works are carried out to minimize unit down time. To provide engineering details, validation and ensure execution of instrumentation system in up-coming projects. Coordinates and supervises the Instrumentation & Controls Section Technicians to provide a complete maintenance service to the Operations Department and perform installation of the same, maintenance, testing and repair for Units on site. Including preparation of schedules, establishing work priorities and carrying out testing as required for turnaround. Coordinates all turnaround activities on the units. Manages the preventive maintenance schedules for all equipments & all the stock levels to ensure the availability of spare parts at all times. Responsible for planning of turnarounds and participate actively to carryout Safety Critical checks (logic checks) and in execution through supervision of both in-house and vendor / contractor personnel to ensure completion of agreed schedule, scope and quality and ensuring safe working at all times. To review/approve plan for testing, calibration of instruments, statutory compliance and safe working in hazardous area. TOTAL YEARS OF EXPERIENCE AND EDUCATIONAL QUALIFICATION: BE / B. Tech Electronic/Instrumentation/Control System Engineering with 12+ years hands on experience in handling of Instrumentation in large and complex manufacturing plants.

Instrument Technician-Freshers 0-3 years of Experience Diploma in Instrumentation/Electronics/Electrical engineering. Location: Jaigarh, Ratnagiri On Randstad payroll- 12 months contract Responsibilities: i. Preventive Maintenance of various Instrumentation. ii. Breakdown maintenance of Plant Instruments. iii. Installation & calibration of various field Instruments. iv. Maintaining IMS Audit & BSC Audit documents. i.e., Permit to work, TBT, JSA, HIRA. Etc. v. Maintaining daily Logs & reports. vi. Coordination with AMC vendors. vii. Coordination with Internal departments. i.e., Operation, Electrical, Mechanical, Store, Marine, Security. viii. Control room operations. Knowledge of Electrical system will be added advantage. May apply on ranju.nair@randstad.co.in

Perform calibration, maintenance, and repair of instrumentation systems to ensure optimal performance. Troubleshoot issues with instruments, control systems, and other related equipment. Required Candidate profile Conduct routine inspections to identify potential problems before they become major issues. Collaborate with cross-functional teams to resolve complex technical issues.

The Instrumentation Engineer plays a crucial role in ensuring the safe and efficient operation of instrumentation systems within the plant. At Birla Cellulosic, Kharach, a prominent player in the Pulp & Fibre industry, we are dedicated to delivering high-quality products and solutions while upholding innovation and sustainability. As an Instrumentation Engineer, you will be at the forefront of maintaining safety practices, including PTW, JSA, TBT, and behavior-based safety measures. Your expertise with technologies such as Yokogawa DCS system, Profibus, Fieldbus Foundation communication protocol, as well as PLC systems like Siemens and Allen Bradley, will be vital in fulfilling your responsibilities. Your primary duties will encompass the upkeep of various instrumentation components such as control valves, ON-OFF valves, and flow meters. The role will involve planning, scheduling, and executing preventive maintenance tasks along with overseeing annual shutdowns. Troubleshooting skills, Root Cause Analysis (RCA), effective communication, and the ability to handle emergencies while efficiently managing manpower are essential attributes for excelling in this position. To qualify for this role, you must hold a Bachelor's degree in Instrumentation Engineering or a related field. A solid understanding of safety practices, familiarity with the mentioned technologies, hands-on experience in instrumentation maintenance, and excellent communication and interpersonal skills are prerequisites for this position. Your capability to handle unforeseen emergencies and effectively manage manpower will be critical for success in this dynamic role.,

Preventive Maintenance & Routine Maintenance of field instrument Maintenance of Marine Container & Transport Safety Statutory compliance to Instrument equipment tasks of DCS, PLC, Analysers & Field Instrumentation, PLC for trouble shooting

Role & responsibilities Perform routine preventive and corrective maintenance on equipment and machinery. Diagnose & Troubleshoot mechanical, electrical, hydraulic, and pneumatic issues. Repair & Replace defective parts, components, or systems to restore functionality. Inspect equipment regularly to identify potential problems before breakdowns occur. Assist in installation, testing, and commissioning of new machinery. Maintain accurate maintenance logs, records, and service reports. Ensure compliance with safety regulations and company policies. Support production teams by minimizing downtime through quick interventions. Collaborate with engineers, supervisors, and other technicians to resolve technical issues. Participate in shutdowns, overhauls, and continuous improvement initiatives. Preferred candidate profile Qualification : ITI / Diploma / B.E. in Mechanical, Electrical, or related field Experience : 25 years (Junior) / 5+ years (Senior) in industrial equipment maintenance Technical Skills : Strong knowledge of mechanical, electrical, hydraulic, and pneumatic systems Industry Exposure : Experience in Manufacturing, Process Industry, Power Plant, or Facility Maintenance preferred Tools Handling : Proficiency in using hand tools, power tools, and diagnostic equipment Safety Awareness : Knowledge of workplace safety standards, PPE, and permit-to-work systems Soft Skills : Good problem-solving ability, teamwork, time management, and communication skills Flexibility : Willingness to work in shifts, travel to sites, and support shutdown/overhaul activities

. Preparation of COD Reports, Updating checklist, Breakdown reports, incident reports. . Operate, Repair & maintenance of a refrigeration system . Repair & Maintenance of the MHES, like RT, Forklift, BOPT & HPTs . Utility & Electrical/Instrumentation maintenance of Panels, DB, UPS, Stabilizer & Batteries. . Recording ISO files, history cards, Data logger, incoming product temperature, Compressor logbooks, & day to day electricity consumption details . Root cause analysed of non-conformance & take corrective action . Daily Checking & keeping healthy of Hydrant, Sprinkler system, Fire alarm, PA system & CCTV . Periodical Checking of all fire extinguisher & refilling schedule. . Organising periodical training related to safety & Safety recording maintaining. . Periodical mock drills on fire, evacuation, electrocution & medical emergency. . Maintaining safety culture on the floor, Reporting on near miss, unsafe condition & unsafe act. . Operate, Checking & maintenance of DG Set, Earth pits conditioning, Lightening Arresters, water pumps, docks, doors & refer trucks . Renewal of license / Certificates . Maintain record of Diesel consumption, water consumption, electricity & other consumables, DG Maintenance Reports, Spare list. . Ensuring of doing energy efficient activities . Plan & activate preventive maintenance and maintain its record.

Designation : Instrumentation Engineer (Maintenance Role) Industry : Chemical Industry. Education : B.E. /B.Tech Instrumentation & Control. Exp.: 10-14 yrs CTC : Upto 14 LPA Job Location : Near Halol, Vadodara.

Key Responsibilities: Ensure proper installation, calibration, and maintenance of analytical instruments and equipment. Handle and troubleshoot Chromatographic systems (HPLC, GC), Atomic Spectrophotometers, Analytical Balances, pH / Conductivity meters, and Autoclaves. Support validation and qualification of instruments as per regulatory guidelines (USFDA, EU, WHO). Coordinate preventive and corrective maintenance schedules with vendors. Maintain calibration records and ensure compliance with GMP and GLP requirements. Provide technical support to analytical teams for smooth lab operations. Key Skills: Strong technical knowledge of laboratory instrumentation. Familiarity with pharma quality and regulatory requirements. Good documentation practices and problem-solving skills. Qualification: B.E. / B.Tech in Instrumentation Experience: 2- 5 years preferred (Freshers with strong fundamentals may also apply).

Job Summary: We are looking for an Instrumentation Maintenance Executive to take care of all instruments and control systems used in our chemical plant. The person will be responsible for regular maintenance, calibration, and troubleshooting of instruments to ensure smooth and safe plant operation. Key Responsibilities: Perform routine maintenance of instruments like pressure, temperature, flow, and level transmitters. Calibrate instruments as per schedule to ensure accuracy. Troubleshoot and repair faulty instruments and control systems. Maintain and update records of all maintenance and calibration activities. Support automation systems like PLC, DCS, SCADA. Follow all safety rules and ensure instruments are safe to operate. Keep track of spare parts and request for replacements when needed. Assist in process improvement and energy-saving projects.