702 Equipment Maintenance Jobs - Page 19

Key Responsibilities: 1 Switchyard Operation & Monitoring: Perform routine monitoring of all switchyard equipment (Transformers, Circuit Breakers, CTs, PTs, Isolators, Reactors, Busbars, etc.). Execute switching operations for energization/de-energization of transmission lines, transformers, and other equipment as per the Load Dispatch Center (LDC) schedule. Ensure voltage, frequency, and load parameters remain within permissible limits. Operate GIS (Gas-Insulated Switchgear) & AIS (Air-Insulated Switchgear) substations . 2 Fault Handling & Emergency Response: Detect and analyze faults, tripping events, and abnormal conditions in switchyard operations. Coordinate with Grid Operators (SLDC/RLDC/NLDC) and Maintenance teams for fault rectification. Respond to blackouts, grid disturbances, or equipment failures and take corrective actions. Maintain proper switching sequence & safety procedures during emergency restoration. 3 SCADA & Substation Automation: Monitor real-time power flow, alarms, and event logs using SCADA/HMI systems. Perform remote/local operation of switchgear, isolators, and circuit breakers . Troubleshoot SCADA communication issues and coordinate with the automation team . 4 Permit to Work (PTW) & Safety Compliance: Issue and verify Permit to Work (PTW), Lockout-Tagout (LOTO) procedures for maintenance activities. Ensure adherence to safety protocols, grounding procedures, and electrical isolation procedures . Conduct safety checks before and after maintenance work on equipment. 5 Reporting & Documentation: Maintain shift logs, event reports, switching operation records, and relay tripping reports . Record voltage, current, frequency, and load conditions in daily shift reports. Generate reports on load flow, transformer loading, reactive power compensation, and outage analysis . Technical Knowledge: Switchyard Equipment Operation (400kV/220kV/132kV Transformers, CBs, CTs, PTs, Reactors, etc.) Switching & Interlocking Procedures, Load Dispatch Coordination SCADA, HMI, RTU, and Substation Automation (IEC 61850, MODBUS, DNP3) Grid Code Compliance & Permit to Work (PTW) Procedures Fault Handling, Tripping Analysis, and Protection Relay Coordination Certifications: Electrical Safety, Grid Operation & Power System Protection (Preferred). Software Skills: SCADA/HMI Operation, Siemens DIGSI, GE EnerVista, MiCOM S1 Agile. Key Traits: Attention to detail, quick decision-making, troubleshooting expertise, and shift flexibility . Preferred Experience In: Shift Operations in 400kV Switchyards / Substations GIS & AIS Substation Equipment Operation Grid Synchronization & Load Flow Management Emergency Handling & Fault Response Coordination SCADA & Substation Automation Systems

Job Description About Us Established in 2003, UFT is a brand in itself, With core business focus on Software & Engineering services performed to the satisfaction of our customers. We are well placed to serve our expertise to global customers with operations at Bangalore (India) & USA. Dedication and deliberation is the main motto of the employees who work to inculcate and optimize every customers requirements. Prime importance is laid upon the security and integrity of the client data. An army of over 300 coupled with an excellent infrastructure makes it possible for us to quickly ramp up to execute large projects. UFT is an ISO 9001 : 2015 certified company About Company Toyota Kirloskar Motor Private Limited is an Indian joint venture between Toyota Motor Corporation and Kirloskar Group, for

Job Description: Position : maintenance manager (Automotive industry) Experience : 3-8 year in Automotive industry with IATF, EHS and EMS standards salary : negotiable Location : Meerut Industry : Automotive Qualification : Diploma/ B Tech ( Electrical ) Well versed with maintenance documentation and IATF and EHS and EMS standards. Develop and implement a preventive maintenance schedule for all manufacturing equipment and machinery. Coordinate with production and quality departments to minimize downtime and maximize equipment efficiency. Ensure timely troubleshooting and repairs of machinery, tools, and systems (e.g., CNC Coiling machines, Grinding machines,, etc.). Maintain all tools, machinery, and related equipment to keep them in optimal working condition. Lead, supervise, and mentor the maintenance team, including technicians, Electrician and engineers. Ensure training of maintenance staff on equipment handling, safety standards, and best practices. Maintain an inventory of critical spare parts and manage suppliers to ensure the availability of necessary equipment. Negotiate with suppliers for cost-effective purchase and quick deliveries of spare parts. Ensure compliance with safety standards and regulations related to equipment maintenance and usage. Implement workplace safety programs and practices to prevent injuries and accidents. Manage relationships with external vendors and contractors for specialized repairs, maintenance contracts, and equipment installations. Maintain accurate records of maintenance activities, including breakdowns, repairs, preventive maintenance tasks, and costs. Generate reports for

BUILD CAREER WITH CHIRON ! WALK IN INTERVIEW On 29 June 2025, Sunday TIME: 10:00 AM to 2:00 PM ENGINEERING & MAINTENANCE, MANUFACTURING Experience 0 7 Years Qualification: ITI/ Diploma/ B.Tech / BE (Electrical / Mech / Instrumentation / Electronics/ Mechatronics) (* Shift applicable) Equipment Maintenance Utility Operation & Maintenance Instrumentation and Calibration HVAC, EMS-BMS Operation Water Systems Operation Automation (Robotic, PLC- SCADA Programming) QMS / Documentation

Key Responsibilities: Supervising Maintenance Activities: Overseeing the daily operations of the maintenance department, including scheduling, assigning tasks, and ensuring timely completion of maintenance and repair work. Managing a Team: Leading, training, and mentoring a team of maintenance technicians, engineers, and other staff, fostering a positive and productive work environment. Ensuring Safety and Compliance: Implementing and enforcing safety procedures and regulations related to maintenance activities, ensuring a safe working environment for all employees and compliance with relevant standards (e.g., ISO, OSHA). Developing Maintenance Strategies: Creating and implementing preventative and predictive maintenance plans to minimize equipment downtime and optimize performance. Managing Budgets: Developing and managing the maintenance budget, tracking expenses, and ensuring cost-effective maintenance practices. Equipment Maintenance: Overseeing the maintenance and repair of various equipment, including boilers, reactors, pumps, and other specialized chemical plant equipment. Inventory Management: Managing spare parts and materials inventory, ensuring timely availability of necessary components for maintenance and repairs. Troubleshooting and Problem Solving: Diagnosing and resolving complex maintenance issues, implementing corrective and preventative actions to minimize downtime and improve equipment reliability. Project Management: Managing maintenance-related projects, including upgrades, installations, and overhauls, ensuring timely and efficient execution. Documentation and Reporting: Maintaining accurate maintenance records, generating reports on maintenance activities, and analyzing data to identify areas for improvement. Education: Bachelor's degree in Mechanical Engineering or a related field is typically required. Experience: Significant experience in plant maintenance, preferably in a chemical manufacturing environment, with experience in a managerial or supervisory role. Technical Expertise: Strong knowledge of chemical plant equipment, maintenance practices, and safety regulations. Leadership and Management: Excellent leadership, communication, and interpersonal skills, with the ability to motivate and manage a team effectively. Problem-Solving and Decision-Making: Strong analytical and problem-solving skills, with the ability to identify and resolve complex maintenance issues. Safety and Compliance: Thorough understanding of safety regulations and procedures related to chemical plant maintenance. Budget Management: Experience in developing and managing maintenance budgets. In the context of Haridwar, Uttarakhand, a maintenance manager in the chemical industry would be expected to: Be familiar with local regulations and safety standards applicable to chemical plants in India. Possess a good understanding of the specific equipment and processes used in the local chemical industry. Be able to work effectively with local vendors and suppliers. Possess strong communication and interpersonal skills to work with a diverse team of maintenance personnel. Have a proven track record of managing maintenance activities in a cost-effective and efficient manner.

Production Planning: Develop and communicate daily, weekly, and monthly production plans to meet organisational targets Workflow Management Team Supervision Equipment Maintenance Quality Assurance Reporting Issue Resolution Training Safety Compliance

Responsibilities: * Installation & De-installation * Maintain equipment Note: 1. Candidate from North Region will be prefer. 2. Qualification: ITI Electronics, Electrical, Diploma in Electronic and B.Tech. Travel allowance Mobile bill reimbursements Food allowance Health insurance Annual bonus

Fitters must be skilled with hands and understand job complexities. Key tasks: use and maintain tools, assemble parts, read plans, coordinate with crew, fix pipe faults, perform maintenance checks, and respond to emergencies. Fitter cert+ ITI/diploma Required Candidate profile Qualified Fitter -2+ years of experience in Aluminium Manufacturing. Skilled in tools, blueprint reading, safety protocols, and working in tough conditions. Physically fit, sharp observation skills.

Maintenance Engineer Since our founding, IDEMIA has been on a mission to unlock the world and make it safer through our cutting-edge identity technologies. Our technology leadership makes us the partner of choice for hundreds of governments and thousands of enterprises in over 180 countries, including some of the biggest and most influential brands in the world. In applying our unique expertise in biometrics and cryptography , we enable our clients to unlock simpler and safer ways to pay, connect, access, identify, travel and protect public places at scale and in total security. Our teams work from 5 continents and speak 100+ different languages. We strongly believe that our diversity is a key driver of innovation and performance. Purpose This role plans, designs and implements maintenance programs to optimize the availability and productivity of production site facilities and equipment. Key Missions We are hiring " Maintenance Engineer " based at Mahape, Navi Mumbai . Key roles and responsibilities include: Manages and participates in the installation and commissioning of new equipment, following the local safety guidelines Repairs and maintains mechanical and electronic equipment, tools, and instruments, following the local safety guidelines Liaises with production staff to coordinate repair work, statutory safety inspections and supply of new plant and equipment with production schedules Works in a team with Health and Safety to ensure the machines are compliant with the law Manages the contract with the machine suppliers Monitors the equipment inventory and consumables Provides information for external or internal audit (KPI/ ISO certification) Maintains key performance indicators and delivers monthly reports Requires good knowledge of maintenance procedures and tools obtained through work experience Works independently with moderate supervision Faces problems of a routine nature, but may at times require interpretation or deviation from standard procedures Communicates information that requires some explanation or interpretation Profile & Other Information By choosing to work at IDEMIA, you will join a unique tech company, offering a wide range of growth opportunities. You will contribute to a safer world, collaborating with an international and global community. We value the diversity of our teams and welcome people from all walks of life, regardless of how they look, where they come from, who they love, or what they think. We deliver cutting edge, future proof innovation that reach the highest technological standards and were transforming, fast, to stay a leader in a world thats changing fast, too. At IDEMIA, people can develop their expertise and feel a sense of ownership and empowerment, in a global environment, as part of a company with the ambition and the ability to change the world. Visit our website to know more about the leader in Identity Technologies www.idemia.com

Experience in Machine Shop equipment maintenance CNC, VMC, HMC, Robot. Preferably hands-on experience of maintenance in the CNC machines of Fanuc, Siemens, Mitsubishi. Experienced in Ball Screw Maintenance, Linear Guide ways. Required Candidate profile Knowledge in MTBF, MTTR and various aspects of various machines Should be knowledgeable in various SPM machines. Specialized in handling and servicing of HYDRAULICS and PNEUMATIC types of equipment.

Operate and monitor washing, dry cleaning, and drying machinery, including adding chemicals and cleaning lint traps. Identify stained or damaged items and determine status for repair, spot treatment, rewash, or discard. Inspect cleanliness of articles removed from the washer, dryer, or dry-cleaning machines and place in clean linen carts. Set dryers to designated times and temperatures based on fabrics contained in load. Remove lint and debris from dryer screens, dry cleaning filters, and drain trap after each load. Fold cleaned articles into designated size, either by hand or using folding machine. Maintain accurate records of items laundered. Follow all company safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Visually inspect tools, equipment, or machines (eg, to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors. PREFERRED QUALIFICATIONS Education: No high school diploma or G. E. D. equivalent. Related Work Experience: No related work experience.

Diploma mechanical fresher required at vadodara location Salary- 20833 ctc 15022 inhand Interview at vadodara location only Wtsapp me resume at 9953124655- hr recruiter

Maintenance, Repair and troubleshooting of biomedical equipment's of all hospitals Managing the inventory of all types of medical equipment's installed in the hospital. Coordination with Vendors & service personnel for all assets for any breakdown. Required Candidate profile Looking for person with 5-7 years of experience in Hospital managing Bio Medical profile to handle our all 6 units.He/She will be based out of our head office in Chandigarh.Must be open for travelling

We are thrilled to announce the foxconn Hon Hai Technology India Mega Development Private Limited Is Hiring For a Variety Positions across different functions and levels at Our TN Location Walk In Date : 23rd to 25th June 2025 Reporting Time : 8.30 am to 10.00 am Location: Foxconn Hon Hai Technology India Mega Development Pvt Ltd (6th Gate) Sipcot Hi-Tech Sez, Sipcot Industrial Park, Phase-II Chennai-Bangalore National Highway(NH-4) Suguvarchatiram, Sriperumbadur Role & responsibilities MLB - EE in SMT SMT - EE (Equipment Engineering) Machines Handled Fuji, GKG Printer, Reflow, and AOI. SMT Machine maintenance / Troubleshooting / Calibration. Skill knowledge in line Installation, Alignment and bring up activities. Skill in FUJI Mounter programming / Cycle time reduction. Skill in Breakdown analysis / Troubleshooting & Repair. Machine Tossing control and spare part management. New product development, CPK, GRR, Machine Installation. MLB - Automation Engineering Automation control and Automation machine Troubleshooting. Skill in PLC, Servo drives and System level knowledge. Robotic and Pneumatic Troubleshooting. New Automation Development. Industry 4.0 Knowledge. Updated Technology Experience (AI / Machine Learning / Light out) Defamation knowledge like (Dashboard / Control Centre) MLB - Asset Management Purchase management & Inventory management Customer Management Yield and cost improvement Spare parts management Customer handling and logical thinker. Good Communication skill Inventory management Purchase Process & Management Capex Management RFID & COA MLB Technical Support Responsible for the relative management work and planning. Responsible for the headcount planning and recruitment Knowledge in insurance renewal process and E-nomination. Knowledge in SMT line safety and audit. MLB - TE (Testing Eng ) Test Maintenance Spare Management Downtime Management Team Skill level Improvement Human Skills Training Jobs of section assign Resource coordination to achieved KPI ( Pack out /Retest/NTF/efficiency/Cost) Achieved to major KPI of group MLB-QA (Quality Assurance) IQC (Incoming Quality Control) SQA (Supplier Quality Assurance) IPQC (In Process Quality Control) Strong SMT Components Knowledge Must MLB-QA cORT: Experienced in MLB-Cosmetic Online Reliability Test ORT Chamber handling and Calibration Sample collection and testing process Experienced in Failure Analysis and Tracking Good in the customer handling MLB - AOI Engineering Skill in SPI ( Solder Paste Inspection), AOI ( Automated Optical Inspection) Skill in AOI Programming / Trouble Shooting / Maintenance. Skill in AOI Calibration / System level knowledge. Machine learning / Debugging. Machines handled like, Holly, Samsung, Kohyoung, Parmi. MLB - MECH (Mechanical Eng) Skilled in (SMT / UF / Testing) Carriers & Fixtures Tooling Skilled in Fixtures / Carriers Designing Skill in Fixtures / Carriers Alloy and Composition Skill in Fixture Localization & Modification Skill in New Fixture Development MLB- ME(Manufacturing Eng) SMT / UF / Backend Process Knowledge Skill in SMT / UF Issue Analysis Skill in solution finding and tracking Skill in IPC Standard / Certification Skill in SOP Preparation and Modification Skilled in Reflow profile Tuning and Troubleshooting Expertise in Surface Mount Technology (SMT) processes, along with experience in Design for Manufacturing (DFM) analysis Failure Mode and Effect Analysis (FMEA), Failure Analysis (FA), and New Product Introduction (NPI). Preferred candidate profile EMS Industry

Roles and Responsibilities Perform breakdown maintenance, equipment calibration, and pneumatic system maintenance tasks to ensure optimal plant operations. Troubleshoot issues with industrial automation systems, including robotic pick-and-place machines and continuous process equipment. Conduct EMS (Environmental Monitoring System) checks to maintain compliance with regulatory requirements. Collaborate with team members to resolve technical issues related to instrumentation, sensors, drives, and other industrial automation components. Desired Candidate Profile 3-8 years of experience in electronic manufacturing industries with good communication. Diploma or B.Tech/B.E. degree in Any Specialization. Strong understanding of automation equipment, equipment maintenance, industrial calibration, pneumatics, robotics, sensor technology.

Job Summary: We are seeking a skilled and experienced Senior Biomedical Engineer to lead the installation, maintenance, and troubleshooting of critical care medical equipment such as ventilators, patient monitors, BiPAP/CPAP devices, and other ICU-related instruments. This role demands strong technical knowledge, leadership abilities, and a commitment to ensuring the safety and functionality of healthcare technology. Key Responsibilities: Oversee installation, calibration, and commissioning of biomedical equipment at hospitals and clinics. Perform preventive and corrective maintenance of ventilators, patient monitors, infusion pumps, BiPAPs, CPAPs, and other life-support equipment. Conduct training sessions for hospital staff on equipment usage and basic troubleshooting. Lead a team of junior biomedical engineers and support their development and performance. Respond promptly to service requests and ensure timely resolution of issues. Maintain accurate service reports, documentation, and inventory of spare parts. Collaborate with the sales and application teams during equipment demonstrations and technical clarifications. Ensure compliance with medical equipment regulations, safety standards, and company SOPs. Stay updated with new technologies and provide feedback to improve product offerings and service quality.

Must have Electrical Competency certificate issued by AP Electrical Licensing Board for Electricians. Should have Computer knowledge and CMMS. Must have karnataka state - C License Required Candidate profile Should have sound skill in maintenance of Electrical & instrumentation equipment like 132 KV Switch yard, Transformers, Breakers, HT< Panels, HT& LT motors, Field instruments, PLC, SCADA, BMS etc..

Mainly focus on BREAKDOWN MAINT, PLC based TROUBLESHOOTING, LINE KAIZEN ACTIVITY, INCREASING MACHINE PERFORMANCE, SPARE PARTS MGMT, 3S ACTIVITY, PLC PROGRAM MODIFICATIONS, ROBOTS POSITION ADJUSTMENTS, PREVENTIVE MAINTENANCE, IATF & ISO ASSESSMENTS.. Required Candidate profile DIP/BE 4+yrs exp into Electrical Maintenance with AUTOMOTIVE units Strong exposure with STAMPING & WELDING PROCESS must Strong in EQUIPMENT MAINTENANCE, 5S, TPM, MECHANICS, ELECTRONICS, MTTR, MTBF Perks and benefits Excellent Perks. Send CV to adonis@adonisstaff.in

Complete inventory of uniforms and linens. Conduct monthly inventory of laundry supplies. Report faulty equipment, maintenance needs, and safety hazards to manager/supervisor. Train employees on all laundry procedures, including safety procedures and equipment operation. Verify that laundry requests are completed for each department as needed. Operate and monitor washing, dry cleaning, and drying machinery. Inspect linens and terry for damage. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Speak with others using clear and professional language; prepare and review written documents accurately and completely. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. . Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: At least 1 year of supervisory experience. License or Certification: None .

Role & Operate and monitor pharmaceutical manufacturing machines (e.g. granulation, compression, coating, capsule filling). Maintain cleanliness and hygiene (as per GMP norms) in the manufacturing area. Assist in line clearance, material movement, and documentation work. responsibilities Preferred candidate profile

Career Area: Manufacturing : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you'rejoining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don'tjust talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. JOB PURPOSETo supervise a staff responsible for providing the most efficient, economical and timely Maintenance services required to support the manufacturing and utility operations. JOB DUTIES:This is a supervisory position responsible for providing the most appropriate Plant Engineering & Maintenance services to support manufacturing. Included in these duties are Preventive and Predictive maintenance services, electrical/electronic, systems integration and other services needed to support the operation. Directs a staff capable of providing needed services and utilizes appropriate expertise to assign work. Considers manpower requirements for each project and utilizes proper engineering resources to provide service. Provides guidance and support to staff personnel assigned specific portions of project and coordinates project to ensure completion as scheduled. Resolves problems in Maintenance services the most economical and efficient systems deciding what or which Spares and services should be purchased. Acts as a trouble-shooter and investigates and determines causes for failure, lack of efficiency and need for repairing or improving equipment. Analyzes problems, discusses with other technical personnel and determines most cost-effective method to resolve problem. Assigns work according to expertise and follows projects to ensure satisfactory completion. Ensures proper selection, direction, development and motivation of all personnel to maintain an effective and efficient work force capable of meeting objectives. Ensures government related compliance, proactive planning to ensure remain facility compliance with regulations. Adheres to established standards, policies and practices relating to quality, cost reduction, safety, hazardous materials, ergonomics, affirmative action, etc. in performing assigned duties. The position supervises or manages a work unit of primarily management and salaried employees where planning, scheduling, monitoring, and reviewing work of subordinates is required. The position is responsible for expense budgets, capital forecasts and expenditures, and all personnel issues in the area including performance evaluations of subordinates. The position often confronts complex issues and problems that require careful analysis and diagnosis. Problems are often unique, and solutions can require original approaches. The incumbent may modify existing approaches or develop new solutions. The incumbent establishes and then monitors general policies and guidelines for projects under his/her control, to ensure specific management goals are met and desired results are achieved. The position impacts key quality goals including Continuous Improvement, Delivery Timeliness, Equipment Accuracy, Operational Efficiency, Cost Savings, Process Capability, Part Quality, ISO and Class A Certification, etc. BACKGROUND/EXPERIENCE: Requires Bachelor of Engineering (full time) degree with experience of at least 15 years gained through practical experience on a variety of staff and supervisory assignments. An overall knowledge of Maintenance services manufacturing operations, processes, machines, equipment and systems is essential. Requires the ability to plan and organize as well as communicate with other technical personnel. Posting Dates: June 16, 2025 - June 24, 2025 Caterpillar is an Equal Opportunity Employer. Not ready to applyJoin our Talent Community.

Asteria Aerospace Ltd is a full-stack drone technology company providing actionable intelligence from aerial data. We develop deeply customized drone solutions for government and enterprise customers using our in-house hardware design, software development, and manufacturing capabilities. We have been a trusted partner to provide long-term and quality-focused drone products & services to the defence & homeland security, agriculture, oil & gas, energy & utilities, telecommunications, mining, and construction sectors. Our drone solutions protect borders and facilities, improve farm yields, inspect critical assets, and monitor construction sites using the power of aerial intelligence. Asteria Aerospace is a subsidiary of Jio Platforms Ltd, which is a majority-owned subsidiary of Reliance Industries Ltd. If drones excite and inspire you, we would love to have you as a part of our growing team of change-makers. Don t simply watch the latest tech unfold, be a part of creating the future with us! Our Values : Take Charge Build Trust Thrive Together Pursue Excellence Focus on Quality Designation: Associate Engineer I - Flight Operations Employment Mode - Full Term Contract Basis for 2 Years We are seeking a skilled drone pilot to join our team. The candidate will be responsible for operating drones for various applications, such as aerial surveying, inspection, mapping and surveillance. The drone pilot will ensure that all flight operations are carried out safely, efficiently, and in accordance with regulatory requirements. Candidates holding a DGCA Remote Pilot Certificate will be preferred. Specific Responsibilities: Conduct pre-flight checks to ensure the drone is airworthy and all equipment is in good working condition. Plan and execute flight operations for various applications, such as aerial surveying, inspection, and mapping. Monitor the drones flight path and adjust as necessary to ensure safety and compliance with regulations. Maintain accurate records of flight operations and equipment maintenance. Collaborate with other team members to develop flight plans, identify potential hazards, and ensure smooth operation of flight missions. Conduct post-flight inspections to assess any damage to the drone and equipment. Stay up-to-date with regulatory requirements, best practices, and emerging technologies related to drone operations.

Role & responsibilities Role Summary This role is responsible for leading the operations and maintenance of manufacturing equipment within the TS block, covering solution preparation systems, filling lines, terminal sterilizers, visual inspection units, and packing machinery. The position requires strong mechanical expertise to manage equipment setup, upgrades, and process improvements, ensuring alignment with regulatory standards from global health authorities. A key focus of the role is to enhance equipment reliability through proactive maintenance strategies, root cause analysis, and continuous improvement initiatives. The incumbent will also be accountable for building and nurturing a high-performance team culture by fostering collaboration, ownership, and accountability at all levels. In addition to technical leadership, the role involves developing people capabilities through structured coaching, mentoring, and skill-building programs. The individual will play a pivotal role in shaping a culture of excellence, safety, and compliance, while driving operational efficiency and sustainable performance. Key Responsibilities 1. Equipment Maintenance & Reliability Engineering - Develop and implement preventive and predictive maintenance strategies to enhance equipment reliability and minimize downtime. - Lead root cause analysis and troubleshooting of mechanical failures, ensuring timely resolution and documentation. - Drive spare parts planning, FMEA completion, and maintenance SOP adherence across all equipment. - Establish and maintain a network of qualified mechanical service vendors and ensure timely execution of maintenance contracts. - Monitor equipment performance trends and implement mechanical upgrades or modifications to improve efficiency and compliance. - Vendor network development for Mechanical works. 2. Equipment Qualification - Lead the mechanical design review and technical evaluation of new equipment, ensuring alignment with process requirements and regulatory expectations. - Prepare and review User Requirement Specifications (URS), and coordinate with vendors for technical discussions and solution finalization. - Oversee and approve Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), and qualification protocols (IQ, OQ, IOQ, PQ, PRQ, PV). - Review and validate engineering drawings including P&IDs, mechanical layouts, and utility schematics. - Coordinate with internal stakeholders and external agencies for equipment installation, commissioning, and validation. 3. Project Management - Lead the planning, design, and execution of capital and improvement projects, including mechanical infrastructure upgrades and equipment expansions. - Monitor project timelines, budgets, and resource allocations, ensuring alignment with business objectives. - Identify and implement opportunities for mechanical and operational improvements in safety, energy efficiency, and productivity. - Ensure successful execution of shutdown activities with a focus on mechanical readiness, safety, and minimal disruption. - Ensuring Implementation of Global Reliability Program (GRP) and Capital projects per plan - Planning and execution of shutdown activities on safely & timely manner 4. Documentation, Compliance & Audit Readiness - Ensure all engineering activities comply with cGMP, GDP, GEP, and EHS standards. - Maintain comprehensive documentation including mechanical specifications, risk assessments, and validation records. - Support internal and external audits, regulatory inspections, and ensure timely closure of deviations, incidents, and CAPAs. - Drive audit preparedness and ensure all mechanical systems are inspection-ready at all times. 5. Reporting & Analysis - Track and analyze mechanical equipment performance, failure trends, and maintenance KPIs. - Prepare monthly reports, annual budgets, and MIS dashboards for leadership review. - Ensure financial discipline by managing departmental expenses within approved limits. 6. People Leadership & Capability Development - Lead, mentor, and develop a technically strong engineering team with a focus on mechanical competencies. - Facilitate structured goal setting, performance reviews, and Individual Development Plans (IDPs). - Promote a culture of accountability, collaboration, and continuous learning. - Provide coaching and technical guidance to enhance team capabilities in mechanical troubleshooting, project execution, and compliance. 7. Cultural & Organizational Alignment - Embody and promote Pfizers core values: Courage, Equity, Excellence, and Joy. - Uphold ethical standards and ensure compliance with workplace legislation related to health, safety, discrimination, and harassment. 8. Statutory requirements : Expected to conduct themselves in line with relevant legislation pertaining to workplace health and safety, discrimination, harassment and bullying. 9. Environmental Health and Safety : Participate in and take responsibility for workplace environment, health and safety at the level required for this position, following the guidelines in the company Environmental, Health and Safety Management System Manual. Ensure personnel safety. Essential Requirements Education: - B.E. / B.Tech in Mechanical Engineering or a related discipline. Experience: - 15+ years of progressive experience in engineering maintenance and mechanical systems within the pharmaceutical or regulated manufacturing industry. Core Competencies: - Strong knowledge of injectable manufacturing equipment and cleanroom operations. - Proficiency in interpreting and reviewing P&ID, mechanical, and utility drawings. - Expertise in mechanical systems design, troubleshooting, and reliability engineering. - Familiarity with cGMP, regulatory guidelines, and statutory compliance. - Skilled in project management, vendor coordination, and capital budgeting. - Demonstrated ability in people management, coaching, and team development. - Excellent communication, negotiation, and interpersonal skills. - Cultural awareness and ability to lead diverse teams. - Strong execution mindset with a focus on results and continuous improvement.

The Advisor, Master Data management will be responsible for the delivery of Master data Management solutions, in a timely and cost-effective manner. They will contribute to the success of the broader work management initiative by applying their technical and practical expertise into the project to deliver high quality outputs and reporting on progress. Technical Capabilities: Graduate/Diploma in MechanicalEngineering/ElectricalEngineering with relevant experience. A strong Maintenance Planning background would be advantageous. Understanding of Master Data Standards and Processes Use of SAP, particularly related to Plant Maintenance Advanced Excel and Microsoft Office knowledge is desirable. Experience in reporting tools like Power Bi and Tableau would be an added advantage. Key Areas of Responsibility: TheAdvisor, Asset Managementwill perform the following duties: Positively support the culture to ensure a safe, productive, quality, sustainable and disciplined approach to work. Facilitates workshops, focus group discussion and one-on-one sessions with key site stakeholders to gather information required to meet project deliverables. Engages key site stakeholders to resolve issues and challenges regarding asset management projects. Support in the quality deliverables & timely delivery of projects and reports Cultivate positive relationships through effective communication, feedback, and consultation.Business requirement gathering. Master data development, creation and governance standard practice.Work management flow preparation for master data management. Utilises various tools and templates to support the development of quality standardised Master Data. Quality assurance and controlling as per the standard procedures in PM master data area. Implementation of continuous improvement plans in the Master data in accordance with the business requirements. Necessary skills: The ideal candidate will be able to display the following necessary skills: Good communications and stakeholder engagement skills with the capability to impart knowledge to colleagues in a clear and concise manner. Good analytical skills to understand the business requirements and ability to correlate with the standard practices. Methodical thinking and ability to develop the process and procedures as per the requirements. Good hands-on experience in principles of master data management. Enjoys focusing on and following set processes and the ability to propose new improvements in the process that helps the sustainability.

Roles and Responsibilities Manage plant operations, ensuring efficient production and quality control. Oversee equipment maintenance to minimize downtime and optimize performance. Ensure compliance with safety regulations and maintain a safe working environment. Coordinate with cross-functional teams to achieve production targets and improve overall efficiency. Monitor productivity levels, identify areas for improvement, and implement corrective actions.