201 Plumbing System Jobs - Page 4

Roles and Responsibilities Prepare detailed design calculations for HVAC, plumbing, fire fighting systems, electricals, and other related disciplines. Coordinate with consultants and contractors to ensure smooth execution of projects. Conduct site visits to monitor progress and identify potential issues. Develop and maintain relationships with clients to understand their needs and expectations. Ensure compliance with industry standards and regulations. CONTACT HR : 9236472875

• 9 –15 years of hands-on experience • Experience in office buildings /Commercial buildings. • Exposure to water supply and distribution • Proficient in AutoCAD, MS Office, Revit MEP • Knowledge on system design as per NBC, SP 35, and UPC guidelines.

Responsibilities: * Collaborate with cross-functional teams on project delivery. * Ensure compliance with building codes and standards. * Prepare detailed plumbing designs using AutoCAD software. Annual bonus

Drive all technical & soft services operations Own the performance of on site MST technician, Fire & Safety AMC, HVAC AMC, critical utilities, Housekeeping (HK),Security ensure laboratory uptime, compliance and safety standards are met 247. Required Candidate profile Oversee PPM, HVAC AMC, fire safety, vendor SLAs, audits, soft services, energy savings & capex. Lead teams, ensure compliance, submit MIS/risk reports must have technicians sourcing experience.

Job Description for Mechanical Design Manager GENERAL FOR DESIGN ENGINEER RESOURCE A] GENERAL Provide technical expertise to the company towards design of Plumbing + Fire Fighting services. Exhibits skills required for the role to bring about high-quality design deliverables and acquires new skill in the process. Collaborates well with the team and senior regularly. Handles Clients satisfactorily through proactive communication and addresses their requirements. Guides team members such as BIM Modelers effectively. B] JOB DESCRIPTION FOR PLUMBING SYSTEM DESIGN Design of Plumbing system shall consist of (but not limited to) the following Understanding and categorizing of project into type of Building as per National Building Code of India. Conceptualization of design theme. Performing hydraulic calculations for determining the flowrates, head and pipe sizes for various systems under Plumbing. Preparing Water demand calculations and Water Balance diagram. Preparation of Design Basis Report for Plumbing System along with required drawings/sketches. Estimating of Water storage / reserve to be planned. Deciding size and arrangement of U.G and O.H storage tanks. Planning of pump room with equipment, networking of pumps, piping, panel etc. Preparation of Water supply & Drainage schematic. Preparation of Schematic layouts for water supply, internal drainage, external drainage etc. Estimation of Power demand for Plumbing system. Preparation of Automation scheme for water tanks, deciding minimum I/Os required. TENDER & PROCUMENT: Preparation of Tender documents includes detailed Plumbing Layouts, Technical Specification, approved make List & BOQ for Tender enquiry. Techno-Commercial Evaluation of different types of Plumbing equipment & selection of optimum solution in view of project requirement. Preparation of block estimates based on available rates or through rate analysis. Techno-Commercial Evaluation of technical bids. Attending pre-bid meetings. GOOD FOR CONSTRUCTION STAGE: Preparation of Plumbing GFC layouts and sections. Coordination of layouts with Architectural, Structural/Civil and other disciplines. CONSTRUCTION ADMINISTRATION: Timely completing Vendor data reviews such as that of Shop Drawings, Product Submittals, GA Drawings etc., participating in discussion with Authorities, witnessing testing of equipment etc. Attending meetings with Client or Client representatives as per decided schedule. Site visits as and when required. DOCUMENTATION PROCESSES: Actively coordinating with various disciplines such as Architecture, Civil, Structural etc. Strictly adhering to company processes such as obtaining reviews from assigned experts, inter-disciplinary checks from various disciplines and clearances from discipline leaders. IT/SOFTWARE SKILLS: Proficiency in use of M.S office. Knowledge of AutoCAD. Knowledge and preferably experience on REVIT 3D. C] JOB DESCRIPTION FOR FIRE FIGHTING SYSTEM DESIGN Design of Fire Fighting system consists of (but not limited to) the following Understanding and categorizing of project into applicable Class of Fire. Conceptualization of design theme. Preparation of Design Basis Report for Fire Fighting System along with required drawings/sketches. Designing of Fire Fighting system and its equipment adhering to NBC/IS/NFPA norms or guidelines consisting of (but not limited to): Hydraulic calculation of water flowrate required for effective Fire Fighting. Selection of Pump capacity accordingly. Estimating of Water storage / reserve. Deciding size and arrangement of U.G and O.H storage tanks. Planning of Fire pump room, networking of pumps. Preparation of Sprinkler system schematic layouts referring provisions given in standards. Hydraulic design of Sprinkler system using Pipenet. Preparation of Hydrants schematic layouts referring criteria given in standards. Hydraulic design of Wet-riser network using Pipenet. Design of Pre-action system. Design of Gas suppression system. Selection and planning of Fire Extinguishers on layouts. Planning, design and preparation of Water curtains for compartmentation. Preparation of Schematic Fire fighting layouts & Fire SLD. Gas suppression system. TENDER & PROCUREMENT: Preparation of Tender documents includes detailed Fire Fighting Layouts, Technical Specification, approved make List & BOQ for Tender enquiry. Techno-Commercial Evaluation of different types of fire pumps & selection of optimum solution in view of project requirement. Preparation of block estimates. Techno-Commercial Evaluation of technical bids. Attending pre-bid meetings. GOOD FOR CONSTRUCTION STAGE: Preparation of Fire Fighting GFC layouts and sections. Coordination of layouts with Architectural, Structural/Civil and other disciplines. CONSTRUCTION ADMINISTRATION: Timely completing Vendor data reviews such as that of Shop Drawings, Product Submittals, GA Drawings etc., participating in discussion with Authorities, witnessing testing of equipment etc. Attending meetings with Client or Client representatives as per decided schedule. Site visits as and when required. DOCUMENTATION PROCESSES: Actively coordinating with various disciplines such as Architecture, Civil, Structural etc. Strictly adhering to company processes such as obtaining reviews from assigned experts, inter-disciplinary checks from various disciplines and clearances from discipline leaders. IT/SOFTWARE SKILLS: Knowledge of REVIT 3D Modelling. Should be able to develop small scale models. Experience of working on Pipe net Spray/Sprinkler module. Proficiency in use of M.S office. Knowledge of AutoCAD. Qualifications B.Tech. (Mechanical Engineering) Join the Cloud4c Talent Community If youre looking for a place that elevates creativity with humanity, work that is as innovative as it is fun, and people who lead with both head and heart, youve found it and our doors are open for you. Click to register with our Talent Community. Well keep your information and reach out to you when we post opportunities in the future that might be a fit. Sign Up

T Design & Development: Design mechanical components, systems, or processes using CAD software (e.g., AutoCAD, SolidWorks). Develop and test prototypes, and refine designs based on performance analysis. Project Planning & Execution: Prepare and review engineering plans, technical specifications, and cost estimates. Manage and oversee project timelines, resources, and execution from conception to completion. Installation & Commissioning: Supervise installation of mechanical equipment and systems (e.g., HVAC, plumbing, piping, machines). Ensure proper commissioning and performance testing of installed systems. Maintenance & Troubleshooting: Plan and conduct preventive maintenance activities. Diagnose mechanical issues and provide timely solutions to ensure minimal downtime. Collaboration & Coordination: Coordinate with electrical, civil, and other engineering teams on cross-functional projects. Liaise with vendors, contractors, and suppliers to ensure timely delivery and compliance. Process Improvement: Evaluate existing mechanical systems and recommend modifications to improve efficiency. Implement cost-saving techniques and performance enhancements. Compliance & Safety: Ensure all work complies with environmental and safety regulations. Participate in risk assessments and enforce safety protocols on-site. Technical Skills MEP System Design Proficiency in designing mechanical (HVAC), electrical (lighting, power), and plumbing (water supply, drainage, fire fighting) systems. AutoCAD / Revit MEP / BIM Strong knowledge of drafting and modeling software used for MEP layouts and clash detection. Project Management Ability to manage project timelines, cost estimation, resource planning, and execution across all MEP services. HVAC Knowledge In-depth understanding of heating, ventilation, and air conditioning system design, ducting, load calculation, and system balancing. Electrical System Expertise Knowledge of lighting systems, load distribution, power layouts, earthing, and UPS/generator systems. Plumbing and Fire Protection Proficiency in water supply systems, drainage, pump sizing, sprinkler systems, and compliance with fire safety standards. Codes & Standards Familiarity with local and international building codes (NBC, ASHRAE, NEC, NFPA, IPC, etc.). Site Supervision & Coordination Experience in overseeing on-site installation, testing, and commissioning of MEP works. Clash Detection & Coordination Use of BIM tools to detect and resolve clashes between architectural, structural, and MEP elements. Quantity Takeoff & BOQ Preparation Ability to calculate quantities and prepare Bill of Quantities for all MEP works. Preferred candidate profile B.Tech. / B.E in Mechanical Engineering

Electrical and Mechanical Works, Installation, Inspection, and testing of all equipment of MEP, Ensure all MEP equipment work carried out as per drawing, Need candidate from Developer companies Apply Only Local Candidates recruitment@goyalco.com

Job Summary: The MEP Lead / Manager will be responsible for overall planning, execution, quality control, and coordination of all Mechanical, Electrical, and Plumbing (MEP) systems in a commercial high-rise IT tower project. The role includes managing multidisciplinary teams, ensuring compliance with applicable Indian and international standards, and delivering systems that meet the latest sustainability and smart building requirements. Key Responsibilities: Design & Planning Review and approve MEP design drawings, shop drawings, and coordinated layouts. Ensure designs comply with local codes (e.g., NBC, ECBC) and international standards. Coordinate with architects, structural, and interior design teams for seamless system integration. Evaluate and implement value engineering options to optimize cost and performance. Execution & Supervision Oversee installation of HVAC, electrical, plumbing, fire protection, ELV, BMS, and other critical MEP services. Supervise subcontractors and ensure adherence to schedule, quality, and safety standards. Monitor site activities to ensure proper installation and workmanship. Testing, Commissioning & Handover Prepare and manage detailed testing and commissioning plans for all MEP systems. Oversee functional testing, system integration, and final acceptance tests. Ensure proper documentation, including O&M manuals and as-built drawings, are handed over to the client. Quality Assurance & Safety Develop and enforce MEP quality assurance and control procedures Conduct regular inspections and audits. Ensure strict compliance with health, safety, and environmental (HSE) standards. Cost & Contract Management Support preparation and control of MEP budgets. Evaluate subcontractor and supplier quotations and manage cost variations. Monitor procurement and ensure timely delivery of long lead items. Sustainability & Smart Systems Oversee implementation of energy-efficient and green building systems (e.g., as per IGBC or LEED requirements). Coordinate smart building solutions, including IoT-based monitoring, intelligent lighting, and advanced BMS. Reporting & Stakeholder Management Provide weekly and monthly progress reports to senior management and clients. Maintain clear communication channels with stakeholders, consultants, and statutory authorities Qualifications & Experience: Bachelors degree in Mechanical or Electrical Engineering (Master’s preferred). 12–15+ years of experience managing MEP works in large-scale high-rise commercial projects in India. At least one successfully delivered IT tower or commercial high-rise building project as MEP Lead / Manager. Strong knowledge of local statutory regulations and approval processes. Technical Skills & Knowledge: Applicable Indian Standards: NBC 2016 (National Building Code of India ECBC (Energy Conservation Building Code) IS codes (e.g., IS 3043 for earthing, IS 655 for HVAC ducting) Applicable International Standards: ASHRAE standards (HVAC design, indoor air quality, energy efficiency) NFPA codes (e.g., NFPA 70 for electrical, NFPA 13 for sprinkler systems, NFPA 72 for fire alarm systems) IEC standards for electrical systems IEEE standards for electrical design and grounding ISO 50001 (Energy Management) LEED standards (for green building compliance) BICSI standards (for IT and telecom infrastructure) Key Competencies: Strong technical expertise across all MEP disciplines. Leadership and team management skills. Excellent planning, organizational, and time management abilities. Strong communication and stakeholder management skills. Proficiency in design and coordination tools (AutoCAD, Revit MEP, Navisworks). Familiarity with project management software (Primavera P6, MS Project). Additional Requirements: Ability to handle multiple subcontractors and ensure alignment with overall project goals. Strong analytical and problem-solving abilities. Experience with green building certifications (IGBC/LEED) is a plus.

Responsibilities: * Collaborate with construction team on new projects * Install, maintain & repair plumbing systems * Ensure code compliance & safety standards met * Fix leaks & unclog drains * Manage water supply network Over time allowance Provident fund Health insurance

Position = Sr. Execution Engineer (Plumbing & Firefighting) Qualification = BE / DME (Mechanical) Experience = 8 to 12 Years Location = Pune Project Execution Experience = High-rise residential & Commercial Compensation = Best in the Industry Job Description Planning and scheduling of all plumbing and fire fighting activities in co-ordination with service contractors, service consultants for shop drawings, architect and civil execution team. Define and implement work procedure and method statements with strong supervision skills for good workmanship. Good execution experience in internal and external plumbing activities as per shop drawings, budget and timeline Good execution experience in the areas of water supply, water treatment plant, sewage treatment plant, rainwater harvesting, organic waste converter, firefighting, plumbing system, CP & sanitary fixtures as per shop drawing, specification and timeline Good knowledge on hydrant, sprinkle system, fire alarm system, PA system etc Strong co-ordination skills

WE ARE HIRING FOR OUR CLIENT COMPANY Good Knowledge in Electrical, Fire, Plumbing, WTP, STP, DG Maintenance EXPERIENCE IN RESIDENTIAL / COMMERCIAL BUILDING MAINTENANCE Candidate Should be Facility Management company Background *KOLKATA *7001294477

Job Summary: Responsible for operation and maintenance of the facilities and utility machineries which includes, Chillers, Heat exchangers, VRF, Makeup air handling units (AHU), House Vac system, Pumps, Vacuum pumps, Wet scrubber, Compressed air systems, Pumps and associated accessories. Ensuring 100% uptime of facility and utility machineries, addressing any mechanical related issues, planning and execution of the planned/unplanned maintenance, maintaining records for all the activities. Providing guidance to the technician on day-to-day activities and should be ready to attend the shift-based operation per business requirements and daily reporting to the technical managers. All time audit readiness Responsibilities: 100% uptime for all the facilities and utility machineries, also responsible for operation of utilities 24x7. Should have good documentation skills. Responsible for operation and adjustment of equipment per facilities requirement. Frequently training and guiding operators and workers on maintenance related activities. Daily tracking and monitoring of equipment performance. Responsible for preparation and updating equipment master list as and when required. Preparation of maintenance calendar for the equipment based on the manufacturer recommendations. Preparation of SOP and Work instructions as per the OEM requirements. Performing planned and unplanned maintenance for the equipment by coordinating with respective users. Maintaining PM, AMC and other maintenance related records for the equipment. Coordination with the external vendors for the OEM dependent activities (AMC). Preparation and maintenance of the critical spares for the machineries as per the OEM recommendations. Verification and maintenance of water generation and storage systems. Quick problem solving and finding root cause for the problems. Reducing MTTR and MTBF for the machineries. Finding root cause and implementing the CAPA for the failures. Ensuring safety, adherence to the procedures and policy. Supporting for the cross functional team. Monitoring technicians performance and providing guidance as and when required. Daily reporting to respective manager. Should have knowledge on GMP. Responsible for Energy conservation, validating and implementing suggestions. Reporting unsafe act and conditions to reduce the incident in the workplace. Kaizen and 5S Skills: Strong knowledge in Operation and maintenance of the utility and facility equipment. Ability to guide the team as and when required. Good communication skills and agile. Should have strong knowledge in electrical machineries like MAU(AHU),Pumps, Chiller ,Cooling tower, vacuum pump, Heat exchangers, VRF, Compressor, plumbing system. Qualification: BE mechanical engineer with 4-6 years of experience in manufacturing /process industries.

An MEP engineer who specializes in the design, installation, and maintenance of mechanical, electrical, and plumbing systems in buildings and other construction projects.

KP Group is looking for Plumber to join our dynamic team and embark on a rewarding career journey Installation of Plumbing Systems: Install and connect pipes, fixtures, and fittings for water supply, heating, cooling, and drainage systems in new construction or renovation projects Repair and Maintenance: Diagnose and repair plumbing issues, such as leaks, clogs, broken pipes, and faulty fixtures Pipefitting: Measure, cut, and thread pipes to fit specific locations and angles, using various plumbing tools and equipment Water Heater Installation: Install and service water heaters, boilers, and other heating systems Fixture Installation: Install and repair plumbing fixtures, such as sinks, toilets, bathtubs, showers, and faucets Backflow Prevention: Install and maintain backflow prevention devices to prevent the contamination of water supply Drain Cleaning: Use specialized tools, such as drain snakes or hydro-jetting equipment, to clear clogs and blockages in drain lines Gas Line Installation: Install and repair gas lines for appliances, such as stoves, water heaters, and fireplaces Plumbing Inspections: Conduct plumbing inspections to identify potential issues or compliance with plumbing codes and regulations Emergency Repairs: Respond to emergency plumbing calls, especially in cases of water leaks or pipe bursts

Lead plumbing system design, manage team, perform hydraulic calculations, ensure code compliance, coordinate with clients and stakeholders, maintain quality standards, and mentor junior staff for successful and efficient project delivery.

BE Mechanical/Electrical with 8+ years of experience, having expertise in MEP-Contracts, Fire protection systems, and other MEP services for Hospitality Projects(High Luxury Hotels) Core Responsibility: 1. Knowledge of MEP related services such as Electrical, PHE, FF, HVAC, STP, WTP, Security and Surveillance, Networking etc., 2. Knowledge of MEP sequence of works, IS codes, rate analysis of items etc. 3. Pre-qualification and short-listing of contractors for various MEP related activities. 4. Review, understand and correlate MEP GFC drawings with the BOQ 5. Reviewing MEP (BOQ technical specifications), preparing the bid documents as per standards and floating of MEP tenders, negotiation with all agencies, analysing the comparative statements and award of work. 6. Reviewing of received quotations, reply to queries received from contractors related to tender document. 7. Experienced in dealing with MEP contractors. 8. Interface with Site team and contractors, to ensure timely completion within given budget, specified standards and defined timelines. 9. Ensure contract policies and procedures are adequately covered as set by management. 10. Preparation, check, review releasing of workorder, agreement as per timelines to Contractors. Who are we looking for Experience in MEP contacts tendering works in MEP Contracting firm Qualifications: BE Electrical/Mechanical with 8+ years of experience.

To ensure site operating smoothly Key Responsibilities Maintain, repair, adjust, and replace the entire plumbing system, including waste-vent-water piping, valves, and the various fixtures and equipment served by this system Perform visual inspections for the detection of abnormal operation and correction of deficiencies Receive work orders and coordinate work to fit schedule as assigned by Supervisor/Manager Estimate time and materials required on work order Maintain work area and equipment in a clean and orderly condition following prescribed safety regulations Respond to calls from facility departments requesting immediate assistance for plumbing problems Respond to emergency call-in situations Cooperate with members of the department and facility on all emergency conditions regarding internal customers, visitors and staff Perform preventive maintenance on related equipment assigned by the Supervisor Have necessary stock and tools in order to maintain, repair or replace malfunctioning equipment Coordinate with other departmental employees on diversified work projects Make daily rounds of building and related equipment as assigned by Supervisor Know current safety regulations Attend all scheduled staff training and safety meetings Key Competencies: ITI Certificate Ability to read blueprints and specifications Good communication skills Ability to troubleshoot related systems

To ensure site operating smoothly Key Responsibilities Maintain, repair, adjust, and replace the entire plumbing system, including waste-vent-water piping, valves, and the various fixtures and equipment served by this system Perform visual inspections for the detection of abnormal operation and correction of deficiencies Receive work orders and coordinate work to fit schedule as assigned by Supervisor/Manager Estimate time and materials required on work order Maintain work area and equipment in a clean and orderly condition following prescribed safety regulations Respond to calls from facility departments requesting immediate assistance for plumbing problems Respond to emergency call-in situations Cooperate with members of the department and facility on all emergency conditions regarding internal customers, visitors and staff Perform preventive maintenance on related equipment assigned by the Supervisor Have necessary stock and tools in order to maintain, repair or replace malfunctioning equipment Coordinate with other departmental employees on diversified work projects Make daily rounds of building and related equipment as assigned by Supervisor Know current safety regulations Attend all scheduled staff training and safety meetings Key Competencies: ITI Certificate Ability to read blueprints and specifications Good communication skills Ability to troubleshoot related systems

To ensure site operating smoothly Key Responsibilities Maintain, repair, adjust, and replace the entire plumbing system, including waste-vent-water piping, valves, and the various fixtures and equipment served by this system Perform visual inspections for the detection of abnormal operation and correction of deficiencies Receive work orders and coordinate work to fit schedule as assigned by Supervisor/Manager Estimate time and materials required on work order Maintain work area and equipment in a clean and orderly condition following prescribed safety regulations Respond to calls from facility departments requesting immediate assistance for plumbing problems Respond to emergency call-in situations Cooperate with members of the department and facility on all emergency conditions regarding internal customers, visitors and staff Perform preventive maintenance on related equipment assigned by the Supervisor Have necessary stock and tools in order to maintain, repair or replace malfunctioning equipment Coordinate with other departmental employees on diversified work projects Make daily rounds of building and related equipment as assigned by Supervisor Know current safety regulations Attend all scheduled staff training and safety meetings Key Competencies: ITI Certificate Ability to read blueprints and specifications Good communication skills Ability to troubleshoot related systems

To ensure site operating smoothly Key Responsibilities Maintain, repair, adjust, and replace the entire plumbing system, including waste-vent-water piping, valves, and the various fixtures and equipment served by this system Perform visual inspections for the detection of abnormal operation and correction of deficiencies Receive work orders and coordinate work to fit schedule as assigned by Supervisor/Manager Estimate time and materials required on work order Maintain work area and equipment in a clean and orderly condition following prescribed safety regulations Respond to calls from facility departments requesting immediate assistance for plumbing problems Respond to emergency call-in situations Cooperate with members of the department and facility on all emergency conditions regarding internal customers, visitors and staff Perform preventive maintenance on related equipment assigned by the Supervisor Have necessary stock and tools in order to maintain, repair or replace malfunctioning equipment Coordinate with other departmental employees on diversified work projects Make daily rounds of building and related equipment as assigned by Supervisor Know current safety regulations Attend all scheduled staff training and safety meetings Key Competencies: ITI Certificate Ability to read blueprints and specifications Good communication skills Ability to troubleshoot related systems

Electrical systems-lighting, panels, DBs, cabling, and safety checks. HVAC systems-split units, air handling units, and exhaust fans. Ensure operational readiness and safety compliance of utility systems like DG, elevators & fire-fighting equipment.

Designation - Fire Alarm Technician Qualification - Dip/B tech Experience - 2 -5 years Salary - 1800 AED - 2500 AED 2 years Employment Visa Full time employment Job location - Dubai HR SAN - 7200255975 Required Candidate profile Candidate should bring all below documents! 1. Resume 2. Original Passport 3. Passport Size Photo-2 4. Educational document copy Candidates send your resume through WhatsApp 7200255975 Perks and benefits Free Accommodation & Transport

Job Title: Maintenance Technician Company : Avadale Resorts Department: Maintenance Reports To: Engineering Head. Employment Type: Full-Time Position Summary: We are seeking a skilled and motivated Maintenance Technician to oversee and execute the maintenance and repair of equipment, machinery, and systems within our facility. The ideal candidate will be responsible for ensuring that all mechanical and electrical systems are operating efficiently and safely to minimize downtime and maximize productivity. The Maintenance Engineer will work closely with other engineering teams, operations staff, and management to implement preventive maintenance programs and troubleshoot issues as they arise. Remuneration : Accommodation and all meals will be covered by the company, any travel expenses done for company related work will be covered by the company. In hand salary is negotiable depending upon experience and will be as per industry standards. Leave : One weekly off Annual Leave : 30 days (Annually) Sick Leave : 12 days ( Annually) Key Responsibilities: 1. Preventive Maintenance: -Implement the preventive maintenance (PM) schedule for all machines, equipment, and facilities, as stipulated by the management. - Keep records of maintenance activities, including inspections, repairs, and upgrades. 2. Equipment Repair: - Troubleshoot, diagnose, and repair malfunctions (equipment, mechanical, electrical, plumbing, masonry). - Respond to breakdowns and issues in a timely manner, minimizing downtime. - Work with external vendors and suppliers for major repairs or replacements as needed. 3. Safety and Compliance: Ensure all maintenance activities are performed in compliance with safety regulations and company policies. Conduct regular safety audits and risk assessments on equipment and machinery. Promote and ensure adherence to all Health & Safety guidelines in the workplace. 4. Documentation and Reporting: Maintain accurate records of all maintenance activities, including parts used, time spent, and work performed. Prepare and submit detailed maintenance reports to management, including any issues or improvements. Track and manage spare parts inventory. 5. Collaboration: Collaborate with the central team to schedule all works without disruptions. Provide technical support and training to the operations team as needed. 6. Project Work: Assist with or lead projects related to new installations, upgrades, or facility improvements. Coordinate with other departments during system installations or changes. Qualifications: Education: ITI Graduate with specialization in Electrical and/or Refrigeration and Air Conditioning Mechanic. Experience: Minimum of 0 year of experience in maintenance, preferably in the Hotel/Hospitality industry. Technical Skills: Training will be provided for air conditioning systems and other equipment. Proficiency in electrical, mechanical, plumbing and air conditioning systems. Strong troubleshooting and diagnostic skills. Certifications: Any relevant certifications are a plus. Soft Skills: Strong problem-solving and analytical abilities. Good communication skills and ability to work well in teams. Detail-oriented and able to manage multiple tasks effectively.

At JLL, the Planning Manager supports the Project Lead in managing and executing complex projects for various industrial developments. This role involves assisting with project coordination, technical oversight, and team management to ensure successful delivery of mechanical and plumbing systems within scope, budget, and timeline. The ideal candidate will have a strong background in mechanical and plumbing systems engineering and excellent project management skills. Key Responsibilities: Assist the Project Lead in planning, coordinating, and overseeing mechanical and plumbing systems engineering projects. Help develop and review designs, specifications, and drawings. Support in managing project schedules, budgets, and resources effectively. Coordinate with internal teams, subcontractors, architects, and clients. Conduct site visits to monitor installation progress and ensure compliance with design specifications. Assist in preparing technical reports, change orders, and project documentation. Help identify and mitigate potential project risks and issues related to mechanical and plumbing systems. Support quality control processes and ensure adherence to relevant codes and standards. Contribute to client presentations and progress meetings. Support the procurement process for mechanical and plumbing equipment and materials. Help prepare project proposals and cost estimates for mechanical and plumbing systems. Qualifications : Bachelor's degree in Civil or Construction Management Services. 10 years of experience in engineering projects. Familiarity with relevant building codes, standards, and regulations. Experience with project management tools and methodologies. Excellent problem-solving and analytical skills. Strong communication and interpersonal abilities. Detail-oriented with good organizational skills. Desired Skills: Knowledge of sustainable building practices and green building certifications (e.g., LEED, BREEAM). Understanding of Building Management Systems (BMS) and smart building technologies. Experience with energy modelling and analysis. Familiarity with integrated project delivery methods.

Key Responsibilities: Assist the Project Lead in planning, coordinating, and overseeingmechanical and plumbing systemsengineering projects. Help develop and reviewmechanical and plumbing systemssystem designs, specifications, and drawings. Support in managing project schedules, budgets, and resources effectively. Coordinate with internal teams, subcontractors, architects, and clients. Conduct site visits to monitor installation progress and ensure compliance with design specifications. Assist in preparing technical reports, change orders, and project documentation. Help identify and mitigate potential project risks and issues related tomechanical and plumbing systems. Support quality control processes and ensure adherence to relevant codes and standards. Contribute to client presentations and progress meetings. Support the procurement process formechanical and plumbingequipment and materials. Help prepare project proposals and cost estimates formechanical and plumbingsystems. Qualifications : Bachelor's degree in Mechanical or Building Services Engineering. 3-5 years of experience in MEP engineering projects. Strong knowledge of MEP systems, including HVAC, Mechanical erection, plumbing, and fire protection. Proficiency in MEP design software (e.g., Revit MEP, AutoCAD MEP, Navisworks). Familiarity with relevant building codes, standards, and regulations. Experience with project management tools and methodologies. Excellent problem-solving and analytical skills. Strong communication and interpersonal abilities. Detail-oriented with good organizational skills. Desired Skills: Knowledge of sustainable building practices and green building certifications (e.g., LEED, BREEAM). Understanding of Building Management Systems (BMS) and smart building technologies. Experience with energy modelling and analysis. Familiarity with integrated project delivery methods