Job Description: We are looking for an experienced and qualified Sr. QC Engineer to join our project team. The ideal candidate will be responsible for quality assurance and control of piping and structural work, with additional exposure to industrial HVAC systems being a plus. The candidate must ensure compliance with project specifications, industry standards, and client requirements. Qualification: B.E. / B.Tech in Mechanical Engineering NDT Level II Certification mandatory Experience: Minimum 5+ years of experience in: Industrial piping and structural works Preferable experience in industrial HVAC systems QA/QC documentation, inspection, and test planning Desired Candidate Profile: Strong understanding of codes and standards (ASME, ASTM, IS) Good documentation and reporting skills Should be proactive and capable of working independently at site Ability to coordinate with contractors, consultants, and internal teams Job Description: We are looking for an experienced and qualified Sr. QC Engineer to join our project team for the RIL site . The ideal candidate will be responsible for quality assurance and control of piping and structural work, with additional exposure to industrial HVAC systems being a plus. The candidate must ensure compliance with project specifications, industry standards, and client requirements. Qualification: B.E. / B.Tech in Mechanical Engineering NDT Level II Certification (UT, RT, PT, MPT – mandatory) Experience: Minimum 5+ years of experience in: Industrial piping and structural works Preferable experience in industrial HVAC systems QA/QC documentation, inspection, and test planning Desired Candidate Profile: Strong understanding of codes and standards (ASME, ASTM, IS) Good documentation and reporting skills Should be proactive and capable of working independently at site Ability to coordinate with contractors, consultants, and internal teams Candidate must be suitable. Show more Show less

Job Description : We are looking for an experienced and qualified Sr. QC Engineer to join our project team. The ideal candidate will be responsible for quality assurance and control of piping and structural work, with additional exposure to industrial HVAC systems being a plus. The candidate must ensure compliance with project specifications, industry standards, and client requirements. Qualification: B.E. / B.Tech in Mechanical Engineering NDT Level II Certification mandatory Experience: Minimum 5+ years of experience in: Industrial piping and structural works Preferable experience in industrial HVAC systems QA/QC documentation, inspection, and test planning Desired Candidate Profile: Strong understanding of codes and standards (ASME, ASTM, IS) Good documentation and reporting skills Should be proactive and capable of working independently at site Ability to coordinate with contractors, consultants, and internal teams Job Description: We are looking for an experienced and qualified Sr. QC Engineer to join our project team for the RIL site. The ideal candidate will be responsible for quality assurance and control of piping and structural work, with additional exposure to industrial HVAC systems being a plus. The candidate must ensure compliance with project specifications, industry standards, and client requirements. Qualification: B.E. / B.Tech in Mechanical Engineering NDT Level II Certification (UT, RT, PT, MPT – mandatory) Experience: Minimum 5+ years of experience in: Industrial piping and structural works Preferable experience in industrial HVAC systems QA/QC documentation, inspection, and test planning Desired Candidate Profile: Strong understanding of codes and standards (ASME, ASTM, IS) Good documentation and reporting skills Should be proactive and capable of working independently at site Ability to coordinate with contractors, consultants, and internal teams Candidate must be suitable. Show more Show less

Greetings from Synergy Resource Solutions, a leading HR Management Consultancy. Our client is a global leader in water technology and services for industrial and infrastructure markets. With a focus on solving water scarcity through desalination, water reuse, and zero liquid discharge (ZLD), they have executed over 2,000 projects across 60 countries. Leveraging the experience and knowhow gained over 40 years handling some of the most difficult to treat waters, they help some of the world’s most recognized companies reduce their water and carbon footprint, ultimately reducing water risk. Position: Manager Design - Vessels Total Experience: 15-20 years of relevant experience Education: Masters or Bachelor’s degree in mechanical engineering (M.E. / M.Tech. or B.E. / B.Tech) Location: Ahmedabad Primary Job Responsibilities, but not limited to the following: Study & internalize the requirements of a project pertaining to Pressure vessels, atmospheric tanks, ladders, and platforms & equipment’s related to ZLD- e.g. Flash tank, Heat Exchangers, FFE etc. Provide inputs to the Lead Mechanical engineer on schedule of designs. Conduct out calculations related to vessels & tanks. These include calculations pertaining to specific vessel functionality on one hand (resin expansion, internals sizing etc.) and vessel code calculations on the other (ASME sect VIII Div.1 / 2 vessel strength calculations, nozzle calculations etc.). Conduct analysis for wind, seismic & allowable nozzle loads on vessels and tanks. Conduct preliminary assessment of vessels for fatigue loading as mandated by project specifications. If more detailed FEA is required, coordinate with external agencies & provide system related inputs (data on pressure / temperature cycles). Review the outputs from designers to ensure the outputs meet the requirements of the project and are consistent with code requirements. Ensure that the requirements of OSHA are met when designing platforms & ladders. Review the selection of materials for every requirement to ensure compatibility. Participate in coordination & review meetings to ensure that project specific requirements are captured in designs. For example, nozzle orientations on vessels to be finalized in consultation with the piping group. Resolve vendor queries pertaining to vessels, tanks & platforms by coordinating with the Lead Mechanical Engineers. Participate in customer meetings as necessary on areas pertaining to vessels, tanks & platforms. Create requisitions & upload materials in SAP systems. Review vendor quotes for areas mentioned above to ensure that technical requirements are met. Create datasheets / specifications as required, pertinent to the areas mentioned above. Team handling Show more Show less

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Key Responsibilities Mechanical System Design & Engineering: Develop detailed mechanical designs, equipment layouts, and technical drawings for piping systems, pressure vessels, HVAC, rotating and static equipment, and utility distribution. Perform thermal, structural, and fluid dynamics analysis to optimize mechanical system performance. Create 3D models, P&IDs, and mechanical schematics using advanced CAD software. Select and specify materials, piping, pumps, valves, compressors, and heat exchangers for various industrial applications. Process & Utility System Design Design process piping, fluid transport, and mechanical utility systems for pharmaceutical, oil & gas, and semiconductor manufacturing facilities. Ensure proper sizing, pressure drop analysis, and flow rate calculations for mechanical pipelines and equipment. Develop mechanical infrastructure for critical plant operations, including compressed air, steam, vacuum, and cooling water systems. Perform stress analysis and dynamic simulations to ensure system integrity under operational loads. Equipment Selection & Integration Select, design, and integrate rotating and static equipment such as pumps, compressors, turbines, and heat exchangers into facility layouts. Ensure proper foundation design, vibration analysis, and mechanical support structures for large-scale equipment. Develop equipment installation and maintenance guidelines to enhance plant reliability. Advanced Digital Design & Coordination Use AutoCAD, Revit, SolidWorks, and Navisworks to create detailed 3D models and layouts for industrial plant construction. Conduct clash detection and coordination with structural, electrical, and process engineering teams. Utilize Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) to enhance mechanical system designs. Implement Building Information Modeling (BIM) methodologies to optimize mechanical system coordination. Regulatory Compliance & Sustainability Ensure designs comply with ASME, API, IS, NFPA, ISO, and local construction regulations. Integrate energy-efficient and sustainable practices into mechanical system designs, reducing operational costs and environmental impact. Conduct HAZOP and risk assessments to ensure mechanical systems meet safety and reliability standards. Project Coordination & Execution Collaborate with cross-functional teams, vendors, and contractors to ensure seamless execution of mechanical designs. Provide technical oversight and troubleshooting during project execution. Develop engineering reports, design justifications, and procurement specifications for mechanical components.. Qualifications & Experience Bachelor’s or Master’s Degree in Mechanical Engineering from a recognized institution. 10–15 years of experience in mechanical design engineering for construction, oil & gas, pharmaceuticals, or semiconductor manufacturing. Proven experience in designing piping systems, pressure vessels, rotating equipment, and industrial utilities. Strong problem-solving skills with the ability to manage multiple projects and cross-disciplinary coordination. About Micron Technology, Inc. We are an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life for all . With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron® and Crucial® brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities — from the data center to the intelligent edge and across the client and mobile user experience. To learn more, please visit micron.com/careers All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. To request assistance with the application process and/or for reasonable accommodations, please contact hrsupport_india@micron.com Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron. Show more Show less

Greetings from Synergy Resource Solutions, a leading HR Management Consultancy. Our client is a global leader in water technology and services for industrial and infrastructure markets. With a focus on solving water scarcity through desalination, water reuse, and zero liquid discharge (ZLD), they have executed over 2,000 projects across 60 countries. Leveraging the experience and knowhow gained over 40 years handling some of the most difficult to treat waters, they help some of the world’s most recognized companies reduce their water and carbon footprint, ultimately reducing water risk. Position: Manager Design - Vessels Total Experience: 15-20 years of relevant experience Education: Masters or Bachelor’s degree in mechanical engineering (M.E. / M.Tech. or B.E. / B.Tech) Location: Ahmedabad Primary Job Responsibilities, but not limited to the following: Study & internalize the requirements of a project pertaining to Pressure vessels, atmospheric tanks, ladders, and platforms & equipment’s related to ZLD- e.g. Flash tank, Heat Exchangers, FFE etc. Provide inputs to the Lead Mechanical engineer on schedule of designs. Conduct out calculations related to vessels & tanks. These include calculations pertaining to specific vessel functionality on one hand (resin expansion, internals sizing etc.) and vessel code calculations on the other (ASME sect VIII Div.1 / 2 vessel strength calculations, nozzle calculations etc.). Conduct analysis for wind, seismic & allowable nozzle loads on vessels and tanks. Conduct preliminary assessment of vessels for fatigue loading as mandated by project specifications. If more detailed FEA is required, coordinate with external agencies & provide system related inputs (data on pressure / temperature cycles). Review the outputs from designers to ensure the outputs meet the requirements of the project and are consistent with code requirements. Ensure that the requirements of OSHA are met when designing platforms & ladders. Review the selection of materials for every requirement to ensure compatibility. Participate in coordination & review meetings to ensure that project specific requirements are captured in designs. For example, nozzle orientations on vessels to be finalized in consultation with the piping group. Resolve vendor queries pertaining to vessels, tanks & platforms by coordinating with the Lead Mechanical Engineers. Participate in customer meetings as necessary on areas pertaining to vessels, tanks & platforms. Create requisitions & upload materials in SAP systems. Review vendor quotes for areas mentioned above to ensure that technical requirements are met. Create datasheets / specifications as required, pertinent to the areas mentioned above. Team handling If interested, please share your cv with details of total experience, current salary, expected salary and notice period. Show more Show less

Responsibilities: Prepare and submit RA (Running Account) bills as per work progress. Verify billing details with BOQ, work orders, and approved drawings. Ensure accurate application of GST, TDS, and other statutory taxes. Collect and check supporting documents: - Site measurement sheets - Work completion reports - Material delivery challans - Client NOC or work certifications Coordinate with: - Site engineers for work status - Project managers for approvals - Procurement for material records Submit bills to clients and follow up for approvals and payments. Maintain a tracker of: - Pending invoices - Retention amounts - Payment receipts Reconcile client accounts and resolve billing discrepancies. Raise final bills after project completion. Track and claim retention money as per contract terms. Maintain proper billing records and documentation. Submit regular billing and payment status reports to management. Ensure compliance with company policies and legal norms. Skills Required: Good knowledge of fire fighting systems (hydrants, sprinklers, piping, etc.) Familiarity with BOQ and construction billing procedures. Proficient in MS Excel, Tally, and/or ERP systems. Understanding of tax and billing compliance (GST, TDS, etc.) Show more Show less

This role is for one of the Weekday's clients Salary range: Rs 2000000 - Rs 3000000 (ie INR 20-30 LPA) Min Experience: 15 years Location: Ahmedabad JobType: full-time The Manager - Design (Vessels) will be responsible for overseeing and executing the design of pressure vessels, atmospheric tanks, associated platforms, ladders, and ZLD-related equipment such as flash tanks, heat exchangers, and falling film evaporators (FFE). The role demands a strong technical foundation, leadership in cross-functional coordination, and a hands-on approach to engineering design and code compliance. Requirements Key Responsibilities: Analyze project specifications for pressure vessels, tanks, platforms, ladders, and ZLD equipment. Provide design schedule inputs and updates to the Lead Mechanical Engineer. Perform mechanical design calculations for vessels and tanks, including: Code-based strength calculations (ASME Section VIII Div. 1 & 2) Nozzle sizing and orientation Vessel functionality-specific calculations (e.g., resin expansion, internals) Conduct structural evaluations for wind and seismic loads and allowable nozzle load limits. Carry out preliminary fatigue assessments based on project requirements and coordinate with external FEA consultants when needed. Review design outputs from draftsmen and designers to ensure alignment with project and code standards. Ensure platform and ladder designs comply with OSHA and other applicable safety standards. Review and validate material selection for vessels, tanks, and structural elements to ensure suitability and compatibility. Collaborate with piping and other engineering disciplines to finalize nozzle orientations and equipment layout. Address and resolve vendor technical queries by collaborating with internal engineering stakeholders. Attend customer and project meetings related to vessel, tank, and platform design as required. Prepare and upload material requisitions in the SAP system. Review vendor technical offers to ensure compliance with specifications and project needs. Develop equipment datasheets, technical specifications, and relevant documentation. Lead and mentor a team of design engineers and draftsmen. Key Skills & Competencies: Expertise in vessel and tank design, including structural and mechanical calculations. Strong working knowledge of international codes such as ASME Section VIII Div. 1 & 2. Familiarity with fatigue analysis, wind/seismic load analysis, and nozzle load evaluations. Proficiency in interpreting engineering drawings and equipment specifications. Experience with SAP, engineering tools/software, and document control systems. Excellent coordination, communication, and stakeholder management skills. Team leadership experience with a focus on quality and on-time delivery Show more Show less

Design Draftsman – Wastewater Treatment Systems Location: Maniyakaranpalaiyam, Ganapathy , Coimbatore Department: Proposal Engineering and Designing Reporting To: Team lead Salary Range - 15,000 -20,000 ______________ Job Summary: We are seeking a skilled and detail-oriented Design Draftsman to join our engineering team. The successful candidate will be responsible for developing technical drawings, layouts, and models related to wastewater treatment facilities, pipelines, and equipment. You will collaborate closely with engineers to transform conceptual designs into practical construction documents that meet technical, environmental, and safety standards. ______________ Key Responsibilities: Prepare technical drawings, schematics, and layouts for wastewater treatment systems, pipelines, and associated equipment. Create detailed 2D and 3D models using AutoCAD, SolidWorks, Revit, or other relevant CAD software. Translate conceptual designs provided by engineers into accurate, construction-ready drawings. Develop and update piping and instrumentation diagrams (P&IDs) and other technical drawings. Ensure all designs comply with applicable technical specifications, environmental guidelines, and safety regulations. Participate in project planning and coordination activities to align design deliverables with overall project timelines. Conduct site visits to gather information and incorporate real-world conditions into the design process. Provide technical support during project execution, coordinating with site engineers and contractors as needed. Maintain and update project documentation, ensuring all design records and revisions are well-documented. Support efforts to optimize wastewater treatment layouts for efficiency, space utilization, and cost-effectiveness. ______________ Qualifications: Diploma or Bachelor's degree in Mechanical, Civil, or Environmental Engineering, or related technical field. 2+ years of experience in design drafting, preferably in wastewater treatment or utility infrastructure projects. Proficiency in CAD software including AutoCAD, SolidWorks, or equivalent. Strong understanding of P&ID drawings, piping layouts, and mechanical design principles. Familiarity with environmental and safety standards in infrastructure design. Excellent attention to detail and accuracy in technical documentation. Strong communication and teamwork skills. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹20,000.00 per month Benefits: Cell phone reimbursement Flexible schedule Health insurance Internet reimbursement Provident Fund Schedule: Day shift Fixed shift Morning shift Supplemental Pay: Commission pay Joining bonus Overtime pay Performance bonus Yearly bonus Ability to commute/relocate: Coimbatore, Tamil Nadu: Reliably commute or planning to relocate before starting work (Preferred) Application Question(s): How many years of experience in wastewater treatment Education: Bachelor's (Preferred) Experience: total work: 1 year (Required)

Our solutions are a key part of most industries - electronics, medical research, renewable energy, food production, infrastructure and many more. Working with us means working with the latest technologies and groundbreaking, sustainable innovations. Join us on our journey for a better tomorrow. Role Purpose / Mission As Design Engineer / Sr Design Engineer – NPD – Oil Injected Screw Compressors, your mission is to deliver & participate in new product development projects with engineering point of view while Improving Time to Market and driving the technical competence of GECIA teams with a solution centric approach. You shall achieve this, by developing your competence and by reorienting your energy towards Product Innovation, technology platforms maintaining On-time Delivery & First Time Right Approach. As Design Engineer / Sr Design Engineer you need to plan project execution with the objective of delivering projects within the estimated time and quality standards within the limits of GECIA's structure, processes, and guidelines. Key Responsibilities Customer Focus Understand the project requirements and work content based on the inputs received. Ensure GECIA’s contribution to improve Time to Market. Communicate progress and deliverable updates to the stakeholders, raise red flags and highlight any concerns to all stakeholders. Demonstrate GECIA’s contribution to NPD Projects. Monitor deliverables with adherence to SOPs, resolve technical issues raised. Ensure proper co-ordination with other competences involved CAE, Electrical design etc. Ensure that designs are reviewed by design reviewer prior releasing the same. People Focus Adhere to the Team spirit towards Driving Customer Success & Improving Business Results Instill “CAN DO; WILL DO” attitude in yourself. Maintain a positive team moral with an open atmosphere of teamwork and co-operation. Technology Focus Nurture innovative ideas and focus improvements in the product performance, cost, life, reliability, Sustainability. Promote use of advance manufacturing techniques while designing new products. Promote sharing best practices across all NPD teams. Product Focus Create & Promote use of reusable components, product platforms, Subassemblies, Modular Designs. Operational Excellence Suggest different CAD automation projects to automate repeated processes & to improve the quality. What we expect from you? Experience & Knowledge Requirement Bachelor’s/Master’s degree in Mechanical Engineering with minimum 3-8 years of Experience. Should have basic knowledge of Air Compressors and designing of compressor Package. Should understand key contributors to product Performance, product quality, Aesthetic value. Should have basic understanding of Modularity approach. Should be able to read and interpret the International Standards applicable to Air Compressor industry. Knowledge about Design of Skid packages for compressor would be an added advantage. Knowledge of Sheet metal, Piping design, heavy fabrication, machining processes and parts design. Expertise in Product Development Process (Concept-to-Product). Knowledge of DFMEA, Design Review Processes is essential. Knowledge of DFM & DFA, Design for serviceability. Experience of working on CAD software like Inventor in 3D, 2D and Assembly environments & PLM system Vault/Enovia etc. Knowledge of BOM generation, working on ERP system. Experience of doing design calculations at component level. Personality Requirements Excellent communication skills Sense of urgency Committed team player with learning attitude Customer focus Capable of working under time pressure to respect deadlines Problem solving ability Systematic in planning and monitoring progress of projects. What you can expect from us An excellent culture Ample opportunities for professional development New challenges and opportunities to learn every day A culture known for respectful interaction, ethical behavior, and integrity Drive your Career, Explore Opportunities, Realize your Passion Have multiple interactions with different stakeholders internally and externally Potential to see your ideas realized and to make an impact on interesting projects Plenty of opportunities to grow and develop City - Pune Last Day to Apply 26/06/2025 Diverse by nature and inclusive by choice Bright ideas come from all of us. The more unique perspectives we embrace, the more innovative we are. Together we build a culture where difference is valued and we share a deep sense of purpose and belonging. Show more Show less

About Us: Deerns Spectrum Private Limited is the joint venture between Deerns Groep B.V. and Spectrum PharmaTECH Consultants Private Limited. As a fully integrated business of the globally operating Deerns Group, we specialise in high-end engineering services and are committed to delivering world-class engineering services across India, South Asia, and East Africa. Together, we offer comprehensive advisory, design, and engineering solutions for mission-critical facilities requiring specialized conditions, such as data centers, hospitals, laboratories, and clean rooms. With a unique combination of deep technical expertise and extensive local market knowledge, Deerns and Spectrum are dedicated to serving clients across key sectors, including data centers, healthcare, life sciences, and microelectronics. Deerns is a company that was founded 96+ years ago. We specialize in Mechanical, Electrical and Piping (MEP) advisory, design and engineering particularly for mission critical and high-tech building systems and industrial facilities. We have 600+ employees across 17 offices in 10 countries. We’re experiencing an exciting period of growth, and we have opportunities available for a talented and innovative individual to join our fast-growing office at a senior level and looking to take their career on to the next step. REQUIREMENTS / QUALIFICATIONS: Mechanical or Electrical University degree in Engineering. Working knowledge of plans, prints, specifications, and schematics associated with trade. Construction procedures and practices. Computer literate. Possess excellent communication and organizational skills. Experience: 6-7 Years of MEP project site execution work, preferably in Chemical/API/Intermediates Manufacturing industry RESPONSIBILITIES: Detailed understanding of the Contract documents (drawings and specifications), phasing plans, MEP systems interrelationships, construction sequencing, and project schedule. Facilitate problem-solving, as may arise, between MEP Subcontractors during construction. Validate design issues related to MEP and suggest alternative solutions. Assist in the receipt and review of MEP submittals. Log and post all MEP changes and as-built information on field drawings. Assist in the scoping review, budgeting, and justification of MEP change work order. Assist in the installation of MEP work. Direct, monitor, and control the activities of the MEP Subcontractor. Coordinating and administrating MEP-related materials, systems, and shop drawings. Liaison with Consultant MEP supervisory Engineers, Inspectors, and relevant staff. Ensure that MEP Subcontractors provide and adhere to relevant Quality documentation/records. Assist in the testing and commissioning of MEP equipment. Ensure safety procedures and protocols followed at site by all stake holders and relevant documentation is maintained. Join us and be part of a dynamic Deerns India team where your expertise in MEP engineering will drive innovation and excellence on-site! Apply now and take your career to the next level! Show more Show less

Presently we have an opening for Design Engineer - Mechanical who will responsible for design of skid mounted equipment's such as Lube oil systems, dosing systems etc. Responsibilities: 1. Review of codes, standards, and customer’s or end user’s specifications. 2. Attend kick off meetings with client and understand the requirements. 3. Selection of most suitable components from approved manufacturers. 4. Preparation of technical datasheets of major components being used in the equipment. 5. Preparation of P&I D, GAD, Foundation drawing, submit to the customer and get approval. 6. Creation of Bill of Material (BOM) for procurement. 7. Provide Technical Support & co-ordinate with production team to resolve their queries. Requirements: of relevant experience. 1. BE/BTech (Mechanical Engineering) with 3-4 years experience OR Diploma with 6-8 years 2. Experience in similar capacity at process equipment, piping systems, pumping systems, manufacturing company or at a design service provider to such companies. 3. Hands on experience of Auto-Cad to prepare P&I Ds, sketches for discussion with customer. 4. Proficiency in excel, outlook etc. 5. Excellent communication skills with positive attitude. Additional requirement (preferred ) 1. Hand on experience on Creo/SolidWorks / Plant 3D Job Location: Talawade, PUNE Show more Show less

Entity: Production & Operations Job Family Group: Engineering Group Job Description: About Bp bp Technical Solutions India (TSI) centre in Pune, aims to build on bp’s existing engineering and technical strengths to deliver high quality services to its hydrocarbons and new energy businesses worldwide. TSI brings together diverse engineering capability to provide technical services across a range of areas including engineering, maintenance, optimization, data processes, projects and subsurface, to deliver safe, affordable and lower emission energy, while continuously innovating how we work. Our purpose is to bring together people, energy and markets to power and navigate a changing world. In a time of constant change and possibility we need talent to pursue opportunities, motivated by elite insight and expertise. We’re always aspiring for more digital solutions, balanced outcomes and closer collaboration across our company and beyond, and you could be part of that too. Together we continue to grow as the world’s leading energy company! About The Role The Materials & Corrosion Engineer is accountable for providing corrosion and materials engineering expertise and judgement in the service of the Refinery integrity teams and projects teams in support of engineering risk and the delivery of safe, compliant, and efficient operations. Responsibilities Provide corrosion and materials engineering expertise to refinery teams operations teams across P&O (production & operations) (Operations, Maintenance & Reliability, Projects Ops, Turnarounds) to manage corrosion and materials threats on equipment. Ensure pragmatic solutions are identified and implemented to manage risk, production efficiency, defect elimination and standardization, to deliver safe, reliable, and compliant operations. Support damage mechanism reviews (DMR) for new equipment and revalidations. Review and carry out corrosion rate assessment and prepare corrosion management documentation. Provide corrosion input to risk-based inspection (RBI) plans. Review inspection results and make repair recommendations. Review and endorse corrosion-related metrics (e.g. corrosion control matrices and LOPC (Loss of Primary Containment) data) and intervene where appropriate. Provide corrosion and materials engineering support to incident investigations. May be required to support Biofuel and Biofuel pretreatment. People and business related: Provide visible safety leadership in accordance with bp safety leadership principles, lifesaving rules and process safety fundamentals to model desired safety behaviors Record relevant learning in shared learning systems, incorporate into local activities, specifications/ practices/ procedures and raise high priority lessons Support performance management through implementation, measurement, and analysis of relevant KPI’s to drive continuous improvement. Education: Must have education requirements: Degree in Corrosion or Materials Engineering related discipline (e.g., chemical engineering, chemistry, mechanical engineering, civil engineering). Post graduate certification in corrosion. Must have certifications: API 571 refinery damage mechanisms. API 580/581 RBI. Preferred education/certifications: Professional accreditation e.g., Professional Engineer, Chartered Engineer (IOM3, IChemE, Institute of Corrosion). Above ground storage tank inspection, inspection data analysis for corrosion rates, API 653 remaining life assessment and risk-based inspection plan development (will be beneficial). Certification and/or in-depth knowledge NACE Senior Corrosion Technologist, BSI ISO/ ENI AS Standards, AWS/ CSWIP/ ASNT NDT Techniques Relevant field experience with pressure systems integrity engineering for O&G processing facilities. Experience job requirements: Minimum years of relevant experience: 5+ years’ experience working in the field of Corrosion or Materials Engineering in refining operations. Total years of experience: 5+ years’ experience working in the field of Corrosion or Materials Engineering in refining operations. Must Have Experiences/skills (To Be Hired With) Operational corrosion management experience. Technical expertise in several areas related to the discipline applied to Refinery Operations. These include: Refinery corrosion mechanisms Refinery materials selection Understanding of refinery processing units Inspection techniques (e.g., UT, radiography, visual) Failure investigation Chemical treatments for corrosion control Corrosion monitoring Corrosion management systems for refinery operations Fabric maintenance / painting Certification and/or in-depth working knowledge in API 580, API 510, API 570, API 571, API 653, NACE Senior Corrosion Technologist, BS/ISO/EN/AS standards, AWS/CSWIP/ASNT NDT techniques Familiar with industry standards for corrosion and integrity management and their application. People leadership, teamwork, and an ability to network and influence across organizational boundaries. Fluent in English, written and oral. Familiar with process design, process safety, and operating conditions of typical O&G units Individual must be highly motivated and a self-starter Good to have experiences/skills (Can be trained for – learning/on-the-job): Welding. Sour service. Integrity management in refineries and oil & gas projects. Cathodic protection. Erosion and erosion management. Background in mechanical design, selection, fabrication and quality assurance of pressure equipment, heat exchangers, piping systems, valves, and pressure relief devices Knowledgeable in Biofuel production, process of producing feedstock for various products Knowledgeable in in pretreatment in Biofuel feedstock, reactions, product purification Why join bp At bp, we support our people to learn and grow in a diverse and challenging environment. We believe that our team is strengthened by diversity. We are committed to fostering an inclusive environment in which everyone is respected and treated fairly. There are many aspects of our employees’ lives that are meaningful, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, and excellent retirement benefits, among others! We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Travel Requirement Up to 10% travel should be expected with this role Relocation Assistance: This role is eligible for relocation within country Remote Type: This position is not available for remote working Skills: Advanced & Robotics Inspection Technologies, Advanced & Robotics Inspection Technologies, Agility core practices, Analytical Thinking, Commercial Acumen, Communication, Corrosion Management, Corrosion modelling, Creativity and Innovation, Data Management, Degradation monitoring, Degradation threat assessment, Digital fluency, Engineering Failure Analysis, Equipment preservation and protection, Erosion modelling, External degradation barrier selection, External degradation threats, Incident investigation and learning, Internal degradation barrier selection, Materials and corrosion design philosophy, Materials and weld performance limits, Materials manufacturing methods, Materials Non-Destructive Evaluation (NDE), Materials of construction {+ 10 more} Legal Disclaimer: We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks. Show more Show less

AC TECHNICIAN SENIOR FOR VRF ,PACKAGE INSTALATION/CHILLER KNOWLEDGE,SEMISKILLED VRF PIPING ,DUCTABLE ,CASSETTE AC INSTALATION KNOWELEDGE/FRESHER INTREST TO LEARN THE WORK

Piping fitter should have deep knowledge of the following: Pipe and piping components familiar with Different type of material ( CS, CS-IBR, CS-NACE, LTCS, SS-304, SS-316, SS-321, SS-347, P5, P6, P11, P22, P91, Duplex, Inconel) Type of Valves Inline items (Control Valves, Safety Valves, Flowmeters) Type of Pipe Supports Piping MOC (Material of Construction) Isometric Drawing Reading. Rolling (Horizontal, Vertical, Mixed rolling) Material Requirement Pipe Support requirement Pipe Schedule and Thickness chart Fitting Dimensions Knowledge to Welding Electrode and Fillers How to corelated the pipe supports with Isometric and support standard. Basic knowledge of P&ID Type of branches (Stub in, Stub on, Lateral, Vertical) How to the make miters Skill required for Welder (Tig & Arc – GTAW+SMAW) : Minimum 7 Years Experience & qualify during Test at Site. Skill required for Grinder : Minimum 7 Years experience. Understanding of Grinding Technique. Knowledge of Piping Materials Preparation of Bevel angle, depth, & Surface Finish Hand on experience for operating of AG-5, AG-7, Angle Grinder, Bench Grinder

What You Will Do Preferably should have knowledge of techno-commercial purchase of Direct material (DM) related to HVAC industry in a Manufacturing setup; DM such as MS fabrication, Sheet metal, heat exchanger, electrical items, control panels, Motor, piping, valves, Electrical & electronic goods etc. Scout/ source potential vendors to drive localization initiatives. Managing vendors, suppliers to meet objectives related to cost & delivery Vendor evaluation, negotiating contracts and preparing reports. Establish good relationships with key suppliers to meet targets. How You Will Do It Study of Purchase Requisition - DM. Sending RFI/ RFQ/ RFP (Request for Information/ Quotation/ Proposal) to different suppliers. Compare and evaluate techno-commercial offers from suppliers. Negotiate pricing & terms of agreement applicable to the Order and send Comparative statement for approval. Prepare for Sourcing Board presentation wherever applicable. Maintain approved prices in SAP wherever applicable. Converting Purchase requisitions to Purchase Order in SAP as per approved prices. Supplier capacity planning. Take lead in solving critical material shortage problems. Vendor visits & vendor development. New vendor onboarding- Co-ordinate with new supplier for required documentation; create vendor add request in MDG after receipt of required approvals from procurement and documents from supplier. Maintain updated records of purchased products, delivery information and invoices. Prepare reports on purchase, including cost analysis, spend analysis, inventory analysis etc. Rejection handling- Communicate to Supplier, tracking return material, informing supplier on returned material. Timey replacement of rejected material. Supplier Performance monitoring. What We Look For Should possess 7-8 years’ experience in Procurement; preferably in Manufacturing/ HVAC domain. Good knowledge of vendor sourcing practices (researching, evaluating, and liaising with vendors) Should have exposure to ISO standards & procedures. Hands-on experience with ERP – SAP Proficiency in MS Excel/Word/PowerPoint. Understanding of overall supply chain procedures. Solid analytical skills, with the ability to create financial reports and conduct cost analyses. Negotiation skills. Any Graduate preferably Diploma/Degree in Engineering. Show more Show less

Performs complex BIM or Plant Data Centric assignments involving the use of multiple application platforms, such as Revit, Intergraph SmartPlant, Plant 3D, etc. software, to achieve set results and deadlines. Duties and Responsibilities Works under general supervision to complete HVAC BIM design projects. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Directs project support and production for assigned projects, creating drawings as required using standards and content to meet job requirements (objects within the drawing, doors, lights, etc.). Develops and maintains HVAC system models, including ductwork, piping, and equipment layouts. Coordinates with other disciplines (structural, electrical, plumbing) to ensure proper integration of HVAC systems within the overall building model. Performs clash detection and resolution using software such as Navisworks to identify and resolve conflicts between building systems. Generates accurate quantity take-offs and schedules from BIM models to support cost estimation and procurement processes. Participates in project meetings to discuss design progress, challenges, and solutions with the project team and stakeholders. Ensures compliance with building codes, energy efficiency standards, and project specifications in HVAC system designs. Maintains and updates BIM content libraries specific to HVAC components and systems. Collaborates with engineers and architects to optimize HVAC system performance and energy efficiency through iterative design processes. Prepares and presents design options and recommendations to project managers and clients. Stays current with industry trends, new technologies, and best practices in HVAC BIM design and implementation. Qualifications Minimum : Bachelor's degree in Mechanical Engineering, Architectural Engineering, or related field + 2 years of relevant experience, or demonstrated equivalency of experience and/or education Proficiency in Revit, AutoCAD, and Navisworks Strong understanding of HVAC systems and building codes Experience with 3D modeling and BIM workflows Excellent problem-solving and analytical skills Preferred Qualifications: 3+ years of experience in HVAC design using BIM software Advanced knowledge of Revit MEP and its HVAC-specific features Familiarity with energy modeling and analysis tools Experience with Revizto, Microstation, or other BIM collaboration platforms LEED Accredited Professional certification Knowledge of sustainable design principles and energy-efficient HVAC systems Strong communication skills and ability to work effectively in a team environment Experience with clash detection and resolution in multi-discipline projects Familiarity with industry standards such as ASHRAE and SMACNA Ability to mentor junior designers and contribute to BIM standards development

Responsible for engineering, design, and modification activities related to mechanical equipment, vessels and tanks and piping systems including equipment and piping specifications and procurement. May be involved with the support of installation and operation & maintenance of equipment. Discipline concerning air conditioning, refrigeration, ventilation, combustion, heat transfer, energy, power, fuels, propulsion, machinery, tools, manufacturing, fluids, plumbing, fire suppression systems and devices, water supplies and pumping systems for fire protection. Discipline covers the ability to solve problems that deliver and optimise safe, sustainable and ethical solutions for the design, production and operation of devices, machines, structures, processes and systems involving mechanical elements. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Knowledge Independently analyzes and applies solutions to challenging issues within the area of expertise by applying critical thinking Analyzes and applies solutions to atypical and/or challenging issues within the area of expertise using standard operating procedures/methodologies Engineering experience that provides knowledge and exposure to fundamental theories, principles and concepts Demonstrated experience using AutoCAD, Revit and Navisworks skills. Good written and verbal communication skills. Prepares project deliverables that are reviewed by senior team members Continues to grow knowledge of the organization, customers, and processes Technical Excellence Identifies incremental improvements to existing procedures or processes that increase efficiency or work quality Performs a self-check of work products prior to submitting them to others. Leadership Works independently and collaboratively with a lesser level of guidance needed for unfamiliar tasks Provides regular updates to the manager on project/assignment status May assist more junior staff members with aspects of their job and may coordinate activities of a small team. Qualifications Minimum Bachelor's Degree in Mechanical Engineering (with minimum 10years experience) or Equivalent and specialising in HVAC Design. He/She should be well versed with ASHRAE/CIBSE/NFPA. He/She should have experience in commercial, residential, datacentre, and infrastructure projects from different geographies - USA, Canada, ANZ Region. Experienced Senior Mechanical Engineer - Specialized in HVAC Design. Should be capable of leading the discussions with the Client and lead projects for the HVAC Disciplines. Should be able to take Design decisions independently.

Title : Senior Mechanical Engineer (HVAC/MVAC/P&D for Water/Wastewater/Desalination) 5 to 10 Years of experience in wastewater/water industry. Awareness of pipe network design codes Experience in designing various mechanical components of wastewater treatment systems like ASP, MBBR, SBR, MBR, Digesters, Solids Handling systems, etc. Experience in designing Water Treatment systems including conventional and advance system (e.g., desalination systems). Experience leading the team on various design tasks/deliverables like- Developing the design of Wastewater Treatment Plants (including Sludge Treatment facilities and Odour Control facilities) and Water and Wastewater Networks. Water and wastewater mechanical equipment sizing and selectionScreens, Mixers, Conveyors, Sludge Thickeners and Centrifuges, Chemical dosing systems, etc. Preparing hydraulic calculations for pressurized/gravity systems. Pump and fan sizing/selection. Valve selection (including penstocks). Pipe sizing and material selection. Developing concept design, detail design, tender, and construction documentation in accordance with both, schedule, and budget. Preparing and reviewing design documents e.g., calculations, datasheets, specifications, pipe, and valve schedules. Supervision of 3d modeling and 2d drawing preparation. Good understanding of P&IDs and PFDs. Multidiscipline coordination. Undertake liaison with internal clients/customers/vendors to develop business relationships. Providing mentoring and support for junior engineers and cad technicians. Contribute to the production and delivery of concise high-quality technical documentation in English. Qualifications B.E./M.Tech. (preferred) in Mechanical Engineering field from a recognized university. Professional registration or licensure in their designated home office country or be in active pursuit of such registration.

Title : Senior Mechanical Engineer (HVAC/MVAC/P&D for Water/Wastewater/Desalination) Awareness of pipe network design codes Experience in designing various mechanical components of wastewater treatment systems like ASP, MBBR, SBR, MBR, Digesters, Solids Handling systems, etc. Experience in designing Water Treatment systems including conventional and advance system (e.g., desalination systems). Experience leading the team on various design tasks/deliverables like- Developing the design of Wastewater Treatment Plants (including Sludge Treatment facilities and Odour Control facilities) and Water and Wastewater Networks. Water and wastewater mechanical equipment sizing and selectionScreens, Mixers, Conveyors, Sludge Thickeners and Centrifuges, Chemical dosing systems, etc. Preparing hydraulic calculations for pressurized/gravity systems. Pump and fan sizing/selection. Valve selection (including penstocks). Pipe sizing and material selection. Developing concept design, detail design, tender, and construction documentation in accordance with both, schedule, and budget. Preparing and reviewing design documents e.g., calculations, datasheets, specifications, pipe, and valve schedules. Supervision of 3d modeling and 2d drawing preparation. Good understanding of P&IDs and PFDs. Multidiscipline coordination. Undertake liaison with internal clients/customers/vendors to develop business relationships. Providing mentoring and support for junior engineers and cad technicians. Contribute to the production and delivery of concise high-quality technical documentation in English. Qualifications B.E./M.Tech. (preferred) in Mechanical Engineering field from a recognized university. Professional registration or licensure in their designated home office country or be in active pursuit of such registration. 5 to 10 Years of experience in wastewater/water industry.

7 - 10 Years of experience in wastewater/water industry. Working Experience using Revit and/or Plant 3d and AutoCAD for water market-related designs An associate degree from an accredited technical institution or college in drafting or design Familiarity working with central files and local files Ability to graphically translate verbal and visual instructions into technical models/drawings Ability to manage work-sets, control visibility, and familiarity in using various parameters in Revit and/or Plant 3d families and schedules Experience with AutoCAD Experience in Revit and/or Plant 3d experience loading specifications into models Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university Drafting course from a recognized institute Working experience using REVIT, Autocad and Microstation Professional registration in their designated home office country or be in active pursuit of such registration.

Responsible for engineering, design, and modification activities related to mechanical equipment, vessels and tanks and piping systems including equipment and piping specifications and procurement. May be involved with the support of installation and operation & maintenance of equipment. Discipline concerning air conditioning, refrigeration, ventilation, combustion, heat transfer, energy, power, fuels, propulsion, machinery, tools, manufacturing, fluids, plumbing, fire suppression systems and devices, water supplies and pumping systems for fire protection. Discipline covers the ability to solve problems that deliver and optimise safe, sustainable and ethical solutions for the design, production and operation of devices, machines, structures, processes and systems involving mechanical elements. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Technical Excellence Identifies incremental improvements to existing procedures or processes that increase efficiency or work quality Performs a self-check of work products prior to submitting them to others. Leadership Works independently and collaboratively with a lesser level of guidance needed for unfamiliar tasks Provides regular updates to the manager on project/assignment status May assist more junior staff members with aspects of their job and may coordinate activities of a small team. Qualifications Minimum Minimum Bachelor's Degree in Mechanical Engineering (with minimum 10years experience) or Equivalent and specialising in HVAC Design. He/She should be well versed with ASHRAE/CIBSE/NFPA. He/She should have experience in commercial, residential, datacentre, and infrastructure projects from different geographies - USA, Canada, ANZ Region. Experienced Senior Mechanical Engineer - Specialized in HVAC Design. Should be capable of leading the discussions with the Client and lead projects for the HVAC Disciplines. Should be able to take Design decisions independently. Energy Modelling , Building Performance analysis & IES Software skills listed in detail below. Utilize the energy modelling software like IES VE to simulate the building performance and energy consumption Analyze the data received from client and data from energy results and provide the best energy efficient solutions to tam Collaborate with the multidisciplinary teams for various inputs and outputs to do the efficient design process Ability to work on Cooling/Heating loads, Energy consumption and building performance in IES VE or any other modelling software Familiarity with ASHRAE 90.1, 62.1, 55 and CIBSE requirement Knowledge of Mechanical system architecture and components

Performs complex BIM or Plant Data Centric assignments involving the use of multiple application platforms, such as Revit, Intergraph SmartPlant, Plant 3D, etc. software, to achieve set results and deadlines. Duties and Responsibilities Works under limited supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements (objects within the drawing, doors, lights, etc.). Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. 5+ Years Experience. Experience and proficiency inMicroStation and InRoads, OpenRoads, OpenRail, or other BIM Software (AutoCAD, Civil3D, Geopak, etc.) Engineer in Training Certification (EIT)

Position: Contract Engineer (Sourcing & Bidding) Industry: Open — Chemical, Fabrication, Piping, Engineering, or related industries Location: Baroda / Gujarat Salary: As per market standards & experience Job Summary We are looking for an experienced Contract Engineer with expertise in sourcing, tendering, and bidding processes. The ideal candidate should be capable of handling end-to-end procurement and contract management activities, preparing competitive bids, negotiating with vendors, and ensuring timely delivery of services or materials. The candidate can come from any industry background — chemical, fabrication, piping, or related engineering sectors. Key Responsibilities : Sourcing & Procurement Identify and develop a reliable supplier/vendor base across relevant industries. Evaluate vendor capabilities, negotiate terms, and maintain strong supplier relationships. Conduct market analysis and benchmarking to ensure competitive sourcing. Bidding & Tendering Manage preparation of technical and commercial bids/proposals. Review and understand client requirements and contract documents (RFQ, RFP, Tender docs). Liaise with internal departments (engineering, finance, legal, etc.) for bid preparation. Prepare costing sheets, commercial terms, and risk assessments. Contract Management Draft, review, and finalize contract agreements with vendors and clients. Monitor contract execution to ensure compliance with terms and deliverables. Manage change orders, contract variations, and claims, if any. Coordination & Reporting Coordinate with project managers, site teams, and clients for smooth project execution. Provide timely updates to management regarding bid status, sourcing progress, and risks. Maintain accurate documentation for audit and internal control purposes. Required Skills & Experience Bachelor’s Degree / Diploma in Engineering, Supply Chain, or related field. 3-8 years of experience in contract engineering, sourcing, bidding, or procurement. Prior experience in Chemical, Fabrication, Piping, or similar industries preferred. Strong understanding of commercial & contractual terms, cost estimation, and negotiation techniques. Excellent communication and interpersonal skills. Ability to work independently and handle multiple projects simultaneously. Proficient in MS Office (Excel, Word, PowerPoint); experience with ERP systems is an added advantage. Job Types: Full-time, Permanent Pay: ₹50,000.00 - ₹70,000.00 per month Benefits: Provident Fund Schedule: Day shift Fixed shift Weekend availability Work Location: In person

Job Description Summary The Product Piping Design Engineer will be responsible for the piping design within the Product Piping team, collaborating with cross-functional teams to ensure project success. This role requires a dynamic individual who can provide valuable inputs to the Product Definition Designer and oversee the review process of piping design packages. Job Description Key Responsibilities : Develop and design piping systems in accordance with project specifications and standards. Collaborate with the Product Definition (PDE) Designer to integrate piping design inputs effectively. Review and validate piping design packages to ensure accuracy and compliance with project requirements. Work closely with the Mechanical team to ensure seamless integration of piping designs with overall project objectives. Coordinate with Project Engineering and Sourcing teams to facilitate efficient project execution. Maintain documentation and records of design processes and adjustments. Required Qualifications/Skills Bachelor’s degree in Mechanical Engineering or a related field. Experience in mechanical design engineering, particularly in piping systems Familiarity with relevant design and engineering software tools. Desired Qualifications/Skills Strong collaboration skills and the ability to work effectively within a team. Excellent problem-solving abilities and attention to detail. Piping design at basic/medium level. Familiar with: NX, Autopipe and PLM Additional Information Relocation Assistance Provided: No Show more Show less

Scope Of Work* Primary Shared Across Functionally Quickly identify issues and risks related to the engineering activities identifying and implementing the required mitigation actions Organise the project engineering activities and the assigned resources (engineering specialists, subcontractors, tools, etc.) providing all needed explanation / support Verify the project documentation (technical specifications, drawings, calculations, etc.) and ensure its communication/explanation to the other parties involved in the project Provide inputs to the Functional Head in the definition and preparation of the project procedures and guidelines, and ensure that they are fully met in all the engineering activities and in their outputs (project specifications and documentation) Regularly inform the Functional Head on the performance and the status of the project engineering activities Coordinate the activities of the Engineering subcontractors, collect and verify their activity reports and authorise their payment within his/her limits of authorization Provide inputs to the Functional Head in the evaluation of the project changes (evaluating their feasibility, identifying the technical solution to implement and identifying the required resources) including the ones that can require a change order (to be discussed with the Client) Provide inputs to the Functional Head in the selection of the Engineering subcontractors Relationships Management* Internal External Employees Site coordination, Customer, Vendors, Government agencies Key Result Areas* Engineering execution plan Timely delivery of engineering documents/drawings Interface management Compliance to Codes and standards Vendor prints Key Competencies Behavioral Need to Have Nice to Have Communication skills Team Player Technical Need to Have Nice to Have Technical Knowledge in relevant field (Process, Static & Rotating Equipment, Piping & Instrumentation) Process and Functional Knowledge (including CAD) Relevant Manufacturing & Fabrication Knowledge Exposure to major client / PMC’s specifications and guidelines Thorough knowledge of codes and standards Engineering coordination of large-scale EPC project Interpretation of various codes and standards Knowledge of Statutory compliances Quantity control Customer interface Vendor print control Show more Show less