3261 Piping Jobs

Role Overview We are looking for a AutoCAD Design Engineer with experience in Fire Fighting Systems to join our Hyderabad-based Design team. The candidate will be responsible for preparing design drawings, layouts, hydraulic calculations, and technical documentation for various fire protection systems in compliance with national and international codes. Key Responsibilities Prepare 2D AutoCAD drawings for fire fighting systems including: Sprinkler systems Hydrant & hose reel systems Fire suppression systems (FM-200, NOVEC, CO₂, etc.) Create detailed layouts, piping schematics, and GA/isometric drawings. Conduct hydraulic calculations and pipe sizing. Coordinate with electrical and mechanical teams to avoid service clashes. Ensure designs comply with NFPA, NBC, and relevant IS codes. Prepare BOQ and material take-off based on finalized drawings. Support project and execution teams with drawings and technical clarifications. Modify drawings as per site changes and prepare as-built documentation. Collaborate with clients, consultants, and architects for design approvals. Required Skills Proficient in AutoCAD – drafting and layout preparation. Understanding of fire safety system components and layout standards. Knowledge of relevant codes: NFPA , NBC , IS standards . Strong coordination and communication skills. Ability to handle multiple projects under tight deadlines. Attention to detail and commitment to quality. Preferred Skills Experience in Revit MEP / BIM-based modeling . Hands-on experience in hydraulic calculation software. Familiarity with fire detection and access control systems is a plus. Work Environment Office-based in Hyderabad with occasional site coordination. Collaborative team environment with exposure to major infrastructure projects. How to Apply Send your updated CV and portfolio (if available) to hr@centaurfsa.com with the subject: Application for AutoCAD Design Engineer – Fire Fighting Job Type: Full-time Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Health insurance Paid time off Provident Fund Supplemental Pay: Yearly bonus Work Location: In person

How will you CONTRIBUTE and GROW? The Engineer is part of the hierarchical organization, reporting directly to the Head of the Department as direct discipline superior. In a project execution environment, the primary responsibility of the Engineer is to efficiently execute the work packages of the Discipline, been assigned and to assist the Discipline project Lead Engineer to deliver the work within contractual framework, quality, and schedule and overall cost effectiveness, in order to meet the overall project desired results. General Executes in compliance with Discipline Manual and Job Manual during project execution to ensure that all contractual requirements are implemented and fulfilled. Ensures good quality of the deliverables for the design work. Ensures completion of allocated tasks within allotted man-hours and schedule dates. Contributes to on time quality review of Inter-discipline documents and vendor deliverables. Contributes to implementation of safety relevant principles, standards, rules and procedures. Contributes to implementation of lessons learnt identified for the assigned projects. Supports the technical procurement activities for various types of equipment. Supports reviews and approval of Vendor documents applicable for the Discipline. Attends inspections as per requirement at the request of the Inspection department. Site assistance through replying to site queries. HSE, QA/QC Executes applicable scope of work in compliance with the requirements of the HSE Management System and IMS for the discipline/project. Ensures that the documentation is prepared, checked and approved according to Project Quality Plan and ready to be released by the respective Lead Engineer. Provides all necessary input to the lessons learnt process/capitalization and best engineering practice ___________________ Are you a MATCH? Education: MTech /ME , B.Tech / BE Discipline: Mechanical Engineering Work Experience: Experience in EPC or Detail design engineering company in the engineering discipline for execution of projects in various sectors like Oil & Gas, Energy, Refining, Petrochemicals. Experience range : 5 years — Materials Engineer Our Differences make our Performance At Air Liquide, we are committed to build a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their background. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world.

Responsibilities As a Design Engineer, you will have to work in close coordination with the design team and client. Your Role and Responsibilities will be: Creating detail design 3D model and related drawings using Ship Design software like Cadmatic or Ship Constructor or equivalent. Understanding of detailed production design for Piping related outfitting including 3D model. Understanding and study of PFD, P&ID’s, procurement specification etc. Technical knowledge of preparation of isometrics, arrangement, 3D model for basic, detail and production stages for marine / offshore platforms etc. Good understanding and knowledge of international piping standards, Piping components and material etc for new building & retrofit projects for Shipbuilding & Offshore Industry. Conversant with the Engineering Standards such as API, DIN, ASME, BS / EN etc Reading and understanding the P&IDs, Piping material specification and construction standard. Preparation of bill of materials and weight calculations. Understanding of Pipe support fabrication drawing, Piping Isometric sketches, Layout Drawings. Review of vendor’s documents, drawings, datasheets, specifications and calculations. Willing to re-locate on client site either domestic or International on short notice. Any other associated task or responsibilities assigned from time to time by the organization Job Requirements You are a Diploma or Graduate in Mechanical Engineering (or equivalent) with a Post Graduate qualification in Piping from a recognized institute and have a total work experience of up to 7 years. You must have up to 4 years of hands-on experience with 3D ship design software such as Cadmatic, ShipConstructor, AVEVA Marine, or similar tools. You have worked on detail or basic design projects in area of Ship Outfitting (Piping) design or with shipyard experience. You have good communication skills and enjoy helping customers. You have minute attention to detail and seek perfection in your work. You will be willing to continue to develop your technical knowledge and skills. You are ready to serve minimum service commitment of 1 years in our company. You are ready to relocate to Goa / Mumbai location. We Offer A full-time position with competitive benefits. Exciting and challenging working environment with exposure to international projects. A rapidly growing young and enthusiastic organization with shortest lines of communication with the management. Opportunities for international and domestic travel with ample scope of promotion and personal growth.

Position Summary: As Project Engineer, this job describes in supporting the project team regarding to develop Process flow sheets/ piping instrumentation diagrams in COMOS tool. Work You’ll Do: Drafting of PFDs and/or PIDs in CAE system COMOS or with CAD system AutoCAD. Implementation of changes in PFDs, PIDs or related documents. Data input and management within the CAE-system (database system COMOS) Technical specifications of machines and apparatuses for inquiry and order Execution and co-ordination of changes within the dedicated tasks Preparation of necessary component documentations and the respective, general plant documentation (lists, descriptions, plans, Datasheets etc.) Team: The person defined shall provide the technical support within the Project Team. The tasks of the Project Engineer within a project team include: Issue of Process Flow Sheets (PFD) and/ or Piping and Instrument Diagrams (PID) Issue of Plant listings and related data exploration and input to CAE tool. Support of project team in data input/ extraction of data into/ from CAE system COMOS. Issue of data sheets for specification of parts as compressors, blowers, heat exchangers, special machines, shut-off- and safety valves, etc. Documentation of technical equipment and engineering activities in sales orders Basic Qualifications: Engineering Degree in Mechanical/Mechatronics/Chemical with 0 - 3 years of experiences. Preferred Qualifications: Essential skill and Experience: Completed technical studies or educated technician. Basic knowledge of process technology Experience with CAD tools helpful (COMOS/AutoCAD) Experience in order handling within the plant engineering industry, especially for the processing industry helpful Interested in application of IT-systems/ database-systems. Good English skills in reading. Technical understanding Solution-oriented Flexible Communicative Team player Who we are: Mold-Masters is a global leader in the plastics industry. We design, manufacture, distribute, sell and service highly engineered and customized plastic processing equipment and systems. Our hot runners, temperature controllers, auxiliary injection and co-injection systems are utilized by customers of all sizes in every industry, from small local manufacturers to large worldwide OEM manufacturers of the most widely recognized brands. Over the course of our 50+ year history, we've built our reputation on delivering the best performance through our broad range of innovative technologies that optimize production to enhance molded part quality, increase productivity and lower part cost. Unlock your operations' full potential with Mold-Masters. Mold-Masters is an Operating Company of Hillenbrand. Hillenbrand (NYSE: HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose — Shape What Matters For Tomorrow™ — we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit: www.Hillenbrand.com. EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@hillenbrand.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

Position Summary: As Project Engineer, this job describes in supporting the project team regarding to develop Process flow sheets/ piping instrumentation diagrams in COMOS tool. Work You’ll Do: Drafting of PFDs and/or PIDs in CAE system COMOS or with CAD system AutoCAD. Implementation of changes in PFDs, PIDs or related documents. Data input and management within the CAE-system (database system COMOS) Technical specifications of machines and apparatuses for inquiry and order Execution and co-ordination of changes within the dedicated tasks Preparation of necessary component documentations and the respective, general plant documentation (lists, descriptions, plans, Datasheets etc.) Team: The person defined shall provide the technical support within the Project Team. The tasks of the Project Engineer within a project team include: Issue of Process Flow Sheets (PFD) and/ or Piping and Instrument Diagrams (PID) Issue of Plant listings and related data exploration and input to CAE tool. Support of project team in data input/ extraction of data into/ from CAE system COMOS. Issue of data sheets for specification of parts as compressors, blowers, heat exchangers, special machines, shut-off- and safety valves, etc. Documentation of technical equipment and engineering activities in sales orders Basic Qualifications: Engineering Degree in Mechanical/Mechatronics/Chemical with 2-5 years of experiences. Preferred Qualifications: Essential skill and Experience: Completed technical studies or educated technician. Basic knowledge of process technology Experience with CAD tools helpful (COMOS/AutoCAD) Experience in order handling within the plant engineering industry, especially for the processing industry helpful Interested in application of IT-systems/ database-systems. Good English skills in reading. Technical understanding Solution-oriented Flexible Communicative Team player Who we are: Mold-Masters is a global leader in the plastics industry. We design, manufacture, distribute, sell and service highly engineered and customized plastic processing equipment and systems. Our hot runners, temperature controllers, auxiliary injection and co-injection systems are utilized by customers of all sizes in every industry, from small local manufacturers to large worldwide OEM manufacturers of the most widely recognized brands. Over the course of our 50+ year history, we've built our reputation on delivering the best performance through our broad range of innovative technologies that optimize production to enhance molded part quality, increase productivity and lower part cost. Unlock your operations' full potential with Mold-Masters. Mold-Masters is an Operating Company of Hillenbrand. Hillenbrand (NYSE: HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose — Shape What Matters For Tomorrow™ — we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit: www.Hillenbrand.com. EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@hillenbrand.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

How will you CONTRIBUTE and GROW? The Engineer is part of the hierarchical organization, reporting directly to the Head of the Department as direct discipline superior. In a project execution environment, the primary responsibility of the Engineer is to efficiently execute the work packages of the Discipline, been assigned and to assist the Discipline project Lead Engineer to deliver the work within contractual framework, quality, and schedule and overall cost effectiveness, in order to meet the overall project desired results. General Executes in compliance with Discipline Manual and Job Manual during project execution to ensure that all contractual requirements are implemented and fulfilled. Ensures good quality of the deliverables for the design work. Ensures completion of allocated tasks within allotted man-hours and schedule dates. Contributes to on time quality review of Inter-discipline documents and vendor deliverables. Contributes to implementation of safety relevant principles, standards, rules and procedures. Contributes to implementation of lessons learnt identified for the assigned projects. Supports the technical procurement activities for various types of equipment. Supports reviews and approval of Vendor documents applicable for the Discipline. Attends inspections as per requirement at the request of the Inspection department. Site assistance through replying to site queries. HSE, QA/QC Executes applicable scope of work in compliance with the requirements of the HSE Management System and IMS for the discipline/project. Ensures that the documentation is prepared, checked and approved according to Project Quality Plan and ready to be released by the respective Lead Engineer. Provides all necessary input to the lessons learnt process/capitalization and best engineering practice ___________________ Are you a MATCH? Education: MTech /ME , B.Tech / BE Discipline: Mechanical Engineering Work Experience: Experience in EPC or Detail design engineering company in the engineering discipline for execution of projects in various sectors like Oil & Gas, Energy, Refining, Petrochemicals. Experience range : 5 years — Materials Engineer Our Differences make our Performance At Air Liquide, we are committed to build a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their background. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world.

Anywhere in India, Bhopal, Madhya Pradesh, India Department PROJECT CONSTRUCTION Job posted on Jul 31, 2025 Employee Type REGULAR Experience range (Years) 15 years - 25 years JOB DESCRIPTION SECTION I: BASIC INFORMATION ON THE ROLE Position Name Construction Manager Function Projects Line of Business Regional Business Grade D2 Reporting to Functionally Administratively Manager - Projects Manager - Projects Roles Reporting into No. of employees Role Description Site Engineer 1 or multiple Responsible for providing assistance in supervising and coordinating the on-site activities on a day to day basis SECTION II: JOB SUMMARY Responsible for the administration, management and co-ordination of all project construction related activities. SECTION III: DO – KEY ACTIVITIES AND RESPONSIBILITIES OF THE ROLE Perspective Responsibility Project Execution & Supervision Manage and supervise all mechanical erection and construction activities including installation of pumps, piping, valves, compressors, blowers, tanks, and other mechanical systems in a WTP. Monitor progress and ensure adherence to project schedule and design specifications. Coordinate with civil, electrical, and instrumentation teams for integrated execution. Resource & Contractor Management Allocate resources including manpower, equipment, and materials optimally. Supervise subcontractors and vendors to ensure work quality and timely delivery. Evaluate and approve mechanical work-related contractor bills. Technical & Quality Assurance Ensure mechanical construction meets design, specifications, and applicable codes and standards. Review and interpret mechanical drawings, P&IDs, isometrics, and equipment layouts. Conduct pre-commissioning and testing of mechanical systems. Health, Safety & Environment (HSE ) Enforce site safety standards and ensure compliance with HSE protocols. Lead toolbox talks, risk assessments, and mitigation plans. Coordination & Reporting Liaise with engineering, procurement, planning, and client teams. Prepare daily/weekly progress reports and highlight delays or risks. SECTION IV: DELIVER – KEY OUTPUTS / RESULTS FROM THE ROLE Key Performance Indicators (KPI) What are the measurable indicators for the role? Measurable Deliverables Adherence to project schedule timelines Compliance to budget Compliance to quality standards Timely and efficient reporting of project status Effective follow-up on all the project requirements Effective project deviation tracking mechanisms Customer Satisfaction Index Efficiency in maintenance of site condition Timely completion of project documentation SECTION V: DISPLAY – KNOWLEDGE & SKILLS In this section, please mention the qualification, technical skills and capabilities which are essential to execute the role. It may be a reflection of your own qualification and skills Qualification and technical skills required to execute the role. Please mention any functional knowledge. E.g. PhD in xyz Qualifications Degree in construction management, engineering, or related field Technical Skills MS Office Application Primavera Other suitable technical training Thorough understanding of corporate and industry practices, processes, standards Experience levels required to execute this role E.g. 2-4 yrs of experience as a salesman in abc market Specific Experience - 15 - 22 years of experience in construction project management Over all Experience - 15 - 22 years of project experience Behavioral skills / competencies required for the role. E.g. Attention to detail Behavioral Skills Stakeholder management Excellent organizational skills Strong interpersonal, communication, facilitation and presentation skills Strong analytical and problem solving skills Negotiation skills Project Management Conflict Management SECTION V: KEY INTERACTIONS Mention names of the roles which are not in your department with whom this role interacts Key Interaction – Internal Nature or purpose of interaction Management Strategic inputs and progress review Team Members and Inter-departmental members To define scope, establish and maintain a close working relationship, and ensure a joint commitment to the success of the project Key Interaction – External Nature or purpose of interaction Vendors For contracts, purchase, execution, evaluation, relationship management Clients Relationship management and project progress review

Job Summary Supervising HVAC Chiller plant project, having knowledge of MS piping, Pumps & Ducting etc. Interaction with clients during project execution, project planning, handling, preparation of reports, invoice submission, handing over of project with documentation. Responsibilities and Duties Handle a team of project supervisors, day to day interaction with clients. Job Types: Full-time, Permanent Pay: ₹11,418.00 - ₹30,000.00 per month Schedule: Day shift Work Location: In person

Piping Designer Description We are seeking an experienced Piping Designer to join our engineering team in India. The ideal candidate will have 5-12 years of experience in piping design and a strong background in engineering principles. Responsibilities Develop detailed piping design layouts and specifications for various projects. Prepare piping isometric drawings and 3D models using CAD software. Collaborate with engineering teams to ensure compliance with project specifications and industry standards. Conduct field surveys and site inspections to gather necessary information for design. Assist in the preparation of project documentation and reports. Provide technical support during the construction phase as needed. Ensure all designs meet safety and environmental regulations. Skills and Qualifications Bachelor's degree in Mechanical Engineering or a related field. Proficiency in CAD software (AutoCAD, MicroStation, or similar). Strong understanding of piping design standards and codes (ASME, ANSI, etc.). Experience with 3D modeling software (e.g., PDMS, SmartPlant 3D). Ability to read and interpret engineering drawings and specifications. Excellent analytical and problem-solving skills. Strong communication and teamwork abilities.

Company Description Established in 1986, MA̅NSH Engineers Pvt. Ltd. has over three decades of experience, serving more than 400 clients, including international partners. Headquartered in Ahmedabad, MA̅NSH Engineers Pvt. Ltd. is a leader in Fire Fighting Systems, specializing in turnkey contracts for Fire Suppression Systems. Our team of highly qualified Engineers is proficient in both design and execution, adhering to Indian and international standards. We offer end-to-end solutions for various industries, with a prestigious client portfolio including Bayer, Sanofi, Welspun, covestro, Meghmani, Glenmark, etc. Role Description This is a full-time, on-site role based in Ahmedabad for a Design Intern specializing in Fire Fighting Systems/Piping. The intern will be involved in daily tasks such as supporting the design of fire protection systems, conducting research, utilizing computer-aided design (CAD) software, creating graphics, and assisting the senior Engineers with various projects. This role offers hands-on experience in a professional engineering environment. Qualifications Knowledge of Computer-Aided Design (CAD) Excellent analytical and problem-solving skills Strong communication and teamwork abilities Ability to work on-site in Ahmedabad Pursuing or completed a degree in Engineering, Architecture, Design, or a related field.

Babcock Power is an Equal Opportunity Employer (M/F/D/V). Start Over with Job Search Returning Applicant? Login Now Pipe Stress Engineer Company: Babcock Power APAC Pvt. Ltd. Location: Chennai, India Job Type: Engineering Position Summary: Babcock Power is a global leader in providing innovative, high quality steam generation and energy-related products and services to the power generation and processing industries. We are an organization comprised of complementary, strategically assembled business units, each with its own specialized technology and skills; its own extensive experience and knowledge base; and its own rich history of creating advanced engineering solutions. Vogt Power International (VPI) is one of the business units of Babcock Power, based in Louisville, KY and specializes in the design, manufacture and supply of equipment and solutions to the power generation industry. VPI is an industry leader in heat recovery steam generators (HRSGs) with both domestic and international customers. We are currently seeking for a talented Pipe Stress Engineer to work on a multi-discipline project team to analyze and review the ASME pressure parts and support associated with our Heat Recovery Steam Generators. Essential Responsibilities Perform flexibility analyses for piping systems to ensure stresses are within code allowable limits. Develop piping stress models which include all physical properties of the piping, its contents, and insulation. Locate and design pipe supports and restraints which maintain static equilibrium and minimize stress. Work directly with our design group to ensure the detailed support designs are created accurately and on schedule. Work directly with Piping Designers, Structural Engineers, Product Engineers, Project Engineers, Lead Designers, and others to ensure pipe routing and equipment access is optimized and that loads are properly addressed where piping interfaces with equipment or supports interface with the main structure. Use hand calculations, internal spreadsheets, programs, or other tools to determine or validate miscellaneous expansions, stresses, loads, and support designs. Perform dynamic analyses to determine loads originating from safety valve opening, steam turbine trip, or other dynamic events. Create specifications, lists, requisitions, and review quotes to support the procurement of pipe support material. Communicate and coordinate with VPI’s customer (or customer’s representative) to ensure VPI’s piping scope interfaces properly with the customer’s piping scope. Provide organized and well written reports to describe assumptions, steps taken, and results from work performed. Provide leadership by learning, developing, and coordinating new techniques, standardizing procedures, and providing technical instruction and mentoring to department staff. Participate in project team and client meetings, as needed. Follow all company and department ISO procedures and work instructions. Perform other duties as assigned. Job Requirements / Skills, Knowledge And Abilities A Degree in Engineering related field with emphasis on statics, dynamics, stress analysis and/or Finite Element Analysis. Two years of experience in Heat Recovery Steam Generators or other related piping experience preferred. Experience in operating Caesar II or Auto Pipe piping analysis software preferred. Proficiency with Microsoft Excel. Prior knowledge of ASME Boiler & Pressure Vessel Codes, with an emphasis on B31.1 is preferred. Good communication skills and ability to work well in a team environment. Must have valid Passport for International Travel.

Job Title: HVAC Design Engineer Location: Sanpada, Navi Mumbai Experience: 5 to 15 Years Qualification: Minimum B.E. in Mechanical Engineering Company Overview: Structwel is a reputed Design Consultancy and Project Management firm offering services in Architectural, Civil, Structural and MEP (Mechanical, Electrical & Plumbing) design engineering for Industrial, Infrastructure, Commercial, and Residential sectors. Job Description: We are looking for a skilled and motivated HVAC Design Engineer to join our dynamic team. The ideal candidate will have experience in designing HVAC systems for a variety of building types and must be capable of working independently as well as part of a team. Key Responsibilities: System Design: Designing and developing HVAC systems for various building types, including industrial, institute & commercial. Load Calculations and Equipment Selection: Performing heating and cooling load calculations, selecting appropriate equipment (e.g., chillers, boilers, air handling units), and sizing ductwork and piping systems. Documentation: Preparing detailed engineering drawings, specifications, and technical documents using CAD software and other design tools. Collaboration: Working closely with architects, contractors, project managers, and other engineers to ensure seamless project execution. Compliance: Ensuring that HVAC designs comply with local building codes, regulations, and industry standards. Installation and Commissioning: Overseeing the installation of HVAC systems, conducting system testing, and troubleshooting any issues that arise during commissioning. Sustainability and Energy Efficiency: Designing systems that prioritize energy efficiency and sustainability, potentially aiming for green building certifications. Staying Updated: Keeping abreast of the latest HVAC technologies, trends, and best practices. Project Management: May be involved in project planning, budgeting, and timeline management. Essential Skills and Qualifications: Technical Expertise: Strong knowledge of HVAC principles, thermodynamics, fluid dynamics, and refrigeration. Design Software Proficiency: Proficiency in CAD software (e.g., AutoCAD, Revit MEP) and other relevant HVAC design tools. Analytical and Problem-Solving Skills: Ability to conduct load calculations, analyse system performance, and troubleshoot issues. Communication and Interpersonal Skills: Ability to effectively communicate with clients, colleagues, and other stakeholders. Project Management Skills: Ability to manage timelines, budgets, and resources effectively. Knowledge of Building Codes and Regulations: Familiarity with local building codes, safety standards, and environmental regulations. Bachelor's Degree: Typically requires a bachelor’s degree in mechanical engineering or a related field. Requirements: 2 to 6 years of experience in HVAC design

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title Production Engineer Location Pune About Us GD NASH is a part of Ingersoll Rand engineered solutions division & part of PFT. We are market leader in Centrifugal Blowers and Liquid Ring Vacuum Pumps Job Summary As a Production Engineer , your day-to-day duties will consist of managing the day-to-day production activities as per the plans. Job Description & Responsibilities Planning, managing, and overseeing all elements of production in the facility. Implementing and enforcing safety guidelines and procedures. Ensuring the facility complies with all health and safety regulations. Continuously finding ways to improve production efficiency. Control on manufacturing processes, Manpower, etc. Focus on achieving the targets – Monthly/Quarterly/ Yearly. Daily shop floor loading, update daily production reports. Reduce cycle time Focus on quality/safety/5S Ensure accurate records are maintained for product work orders. Study and understand the workload for the month/quarter/year. Daily planning and monitoring. Resolve the issues in production if any. Study of drawings, updates with engineering if any. Time calculations for the projects and time allocations. Preparation of bar chart. Manpower planning and allocation accordingly. Responsible for achieving daily/monthly/yearly targets. Resource planning (Man/Machine/Material) Preparations of procedures – Assembly/piping welding (GTAW/Fabrication) Hydro Test Performance Test/ Type test Painting Developing skills of operators Qualifications/Skills Proven work experience as a Production Engineer in Piping Fabrication and skid manufacturing or similar role. Knowledge of manufacturing process, and welding activities. Proficiency in MS Office and SAP. Diploma/Degree in Engineering, Mechanical/Production. 3 to 5 years of experience as a Production Engineer/Supervisor. Ability to quickly and efficiently resolve issues that occur during day-to-day operations. Salary – 30 – 40 K/Month. (3.6 – 4.8 L/PA). Role – On company role. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit www.IRCO.com.

Position Summary As Project Engineer, this job describes in supporting the project team regarding to develop Process flow sheets/ piping instrumentation diagrams in COMOS tool. Work You’ll Do Drafting of PFDs and/or PIDs in CAE system COMOS or with CAD system AutoCAD. Implementation of changes in PFDs, PIDs or related documents. Data input and management within the CAE-system (database system COMOS) Technical specifications of machines and apparatuses for inquiry and order Execution and co-ordination of changes within the dedicated tasks Preparation of necessary component documentations and the respective, general plant documentation (lists, descriptions, plans, Datasheets etc.) Team The person defined shall provide the technical support within the Project Team. The tasks of the Project Engineer within a project team include: Issue of Process Flow Sheets (PFD) and/ or Piping and Instrument Diagrams (PID) Issue of Plant listings and related data exploration and input to CAE tool. Support of project team in data input/ extraction of data into/ from CAE system COMOS. Issue of data sheets for specification of parts as compressors, blowers, heat exchangers, special machines, shut-off- and safety valves, etc. Documentation of technical equipment and engineering activities in sales orders Basic Qualifications Engineering Degree in Mechanical/Mechatronics/Chemical with 2-5 years of experiences. Preferred Qualifications Essential skill and Experience: Completed technical studies or educated technician. Basic knowledge of process technology Experience with CAD tools helpful (COMOS/AutoCAD) Experience in order handling within the plant engineering industry, especially for the processing industry helpful Interested in application of IT-systems/ database-systems. Good English skills in reading. Technical understanding Solution-oriented Flexible Communicative Team player Who We Are Mold-Masters is a global leader in the plastics industry. We design, manufacture, distribute, sell and service highly engineered and customized plastic processing equipment and systems. Our hot runners, temperature controllers, auxiliary injection and co-injection systems are utilized by customers of all sizes in every industry, from small local manufacturers to large worldwide OEM manufacturers of the most widely recognized brands. Over the course of our 50+ year history, we've built our reputation on delivering the best performance through our broad range of innovative technologies that optimize production to enhance molded part quality, increase productivity and lower part cost. Unlock your operations' full potential with Mold-Masters. Mold-Masters is an Operating Company of Hillenbrand. Hillenbrand (NYSE: HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose — Shape What Matters For Tomorrow™ — we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit: www.Hillenbrand.com. EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@hillenbrand.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

Position Summary As Project Engineer, this job describes in supporting the project team regarding to develop Process flow sheets/ piping instrumentation diagrams in COMOS tool. Work You’ll Do Drafting of PFDs and/or PIDs in CAE system COMOS or with CAD system AutoCAD. Implementation of changes in PFDs, PIDs or related documents. Data input and management within the CAE-system (database system COMOS) Technical specifications of machines and apparatuses for inquiry and order Execution and co-ordination of changes within the dedicated tasks Preparation of necessary component documentations and the respective, general plant documentation (lists, descriptions, plans, Datasheets etc.) Team The person defined shall provide the technical support within the Project Team. The tasks of the Project Engineer within a project team include: Issue of Process Flow Sheets (PFD) and/ or Piping and Instrument Diagrams (PID) Issue of Plant listings and related data exploration and input to CAE tool. Support of project team in data input/ extraction of data into/ from CAE system COMOS. Issue of data sheets for specification of parts as compressors, blowers, heat exchangers, special machines, shut-off- and safety valves, etc. Documentation of technical equipment and engineering activities in sales orders Basic Qualifications Engineering Degree in Mechanical/Mechatronics/Chemical with 0 - 3 years of experiences. Preferred Qualifications Essential skill and Experience: Completed technical studies or educated technician. Basic knowledge of process technology Experience with CAD tools helpful (COMOS/AutoCAD) Experience in order handling within the plant engineering industry, especially for the processing industry helpful Interested in application of IT-systems/ database-systems. Good English skills in reading. Technical understanding Solution-oriented Flexible Communicative Team player Who We Are Mold-Masters is a global leader in the plastics industry. We design, manufacture, distribute, sell and service highly engineered and customized plastic processing equipment and systems. Our hot runners, temperature controllers, auxiliary injection and co-injection systems are utilized by customers of all sizes in every industry, from small local manufacturers to large worldwide OEM manufacturers of the most widely recognized brands. Over the course of our 50+ year history, we've built our reputation on delivering the best performance through our broad range of innovative technologies that optimize production to enhance molded part quality, increase productivity and lower part cost. Unlock your operations' full potential with Mold-Masters. Mold-Masters is an Operating Company of Hillenbrand. Hillenbrand (NYSE: HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose — Shape What Matters For Tomorrow™ — we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit: www.Hillenbrand.com. EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@hillenbrand.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

We are looking for a skilled Process Designer with hands-on experience in drafting and developing Piping and Instrumentation Diagrams (P&IDs) . The successful candidate will work closely with process and mechanical engineers to translate process requirements into accurate and detailed engineering drawings, ensuring alignment with project specifications, safety standards, and industry best practices. Key Responsibilities Develop, update, and maintain P&ID drawings based on process design data and engineering input. Collaborate with process, instrumentation, mechanical, and piping teams to ensure accurate and coordinated designs. Interpret and implement process flow diagrams (PFDs) into detailed P&IDs. Ensure that all P&IDs meet relevant industry standards (e.g., ISA, ANSI, ISO) and client specifications. Maintain and manage the P&ID database and revision control throughout the project lifecycle. Incorporate engineering changes, field modifications, and as-built updates into the P&IDs. Coordinate with procurement and construction teams to ensure design intent is met. Support HAZOP and design review meetings by providing accurate and updated P&IDs. Maintain documentation and support quality assurance and compliance audits. Required Qualifications: Diploma or Bachelor's degree in Mechanical, Chemical, or Process Engineering or related field. 3–5+ years of experience in P&ID development and process drafting. Proficiency in CAD tools (e.g., AutoCAD, SmartPlant P&ID, AVEVA P&ID, MicroStation). Solid understanding of process systems, valves, instrumentation, and control strategies. Knowledge of industry standards (e.g., ISA S5.1, ASME, ANSI). Preferred Qualifications: Experience in EPC (Engineering, Procurement, and Construction) or industrial project environments. Familiarity with 3D plant design software (e.g., AutoCAD Plant 3D, PDMS, E3D) is an advantage. Basic understanding of process safety, instrumentation, and control systems. Key Competencies: Attention to detail and accuracy in drafting Strong communication and collaboration skills Ability to read and interpret engineering documents Knowledge of engineering change processes Time and document management

Key Responsibilities · Assist in preparing detailed proposals and BOQs for ammonia and utility-based EPC projects. · Interpret RFQs, P&IDs, PFDs, and layout drawings for technical compliance and estimation. · Support layout planning, equipment sizing, and design coordination. · Coordinate with vendors for pricing, technical offers, and delivery timelines. · Prepare cost estimation sheets, material take-offs, and bid documents. · Collaborate with sales and engineering teams for proposal finalization. · Participate in technical discussions with clients, consultants, and internal stakeholders. · Maintain documentation, revision logs, and standard costing templates. Technical Skills · Understanding of ammonia processes and EPC system integration. · Knowledge of fabrication drawings, tanks, pumps, piping, valves, and utilities. · Estimation and costing for mechanical/process equipment and piping systems. · Proficiency in MS Excel , AutoCAD , and basic costing software/models . · Ability to read P&IDs, GA Drawings, and technical specs. Soft Skills · Strong attention to detail and structured approach. · Effective communication for internal and client coordination. · Organized with strong documentation discipline. · Enthusiastic learner and collaborative team member. Education & Experience · B.E./B.Tech. in Mechanical / Chemical / Process Engineering (mandatory) · 5–8 years of experience in technical estimation, sales support, or proposals in the process industry. · Experience in ammonia or chemical plant EPC will be preferred.

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title Production Engineer Location Pune About Us GD NASH is a part of Ingersoll Rand engineered solutions division & part of PFT. We are market leader in Centrifugal Blowers and Liquid Ring Vacuum Pumps Job Summary As a Production Engineer , your day-to-day duties will consist of managing the day-to-day production activities as per the plans. Job Description & Responsibilities Planning, managing, and overseeing all elements of production in the facility. Implementing and enforcing safety guidelines and procedures. Ensuring the facility complies with all health and safety regulations. Continuously finding ways to improve production efficiency. Control on manufacturing processes, Manpower, etc. Focus on achieving the targets – Monthly/Quarterly/ Yearly. Daily shop floor loading, update daily production reports. Reduce cycle time Focus on quality/safety/5S Ensure accurate records are maintained for product work orders. Study and understand the workload for the month/quarter/year. Daily planning and monitoring. Resolve the issues in production if any. Study of drawings, updates with engineering if any. Time calculations for the projects and time allocations. Preparation of bar chart. Manpower planning and allocation accordingly. Responsible for achieving daily/monthly/yearly targets. Resource planning (Man/Machine/Material) Preparations of procedures – Assembly/piping welding (GTAW/Fabrication) Hydro Test Performance Test/ Type test Painting Developing skills of operators Qualifications/Skills Proven work experience as a Production Engineer in Piping Fabrication and skid manufacturing or similar role. Knowledge of manufacturing process, and welding activities. Proficiency in MS Office and SAP. Diploma/Degree in Engineering, Mechanical/Production. 3 to 5 years of experience as a Production Engineer/Supervisor. Ability to quickly and efficiently resolve issues that occur during day-to-day operations. Salary – 30 – 40 K/Month. (3.6 – 4.8 L/PA). Role – On company role. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit www.IRCO.com.

You should have 2 to 3 years of experience in HVAC design and drafting. Your responsibilities will include creating ducting and piping layouts, positioning equipment, conducting heat load calculations, developing piping schematics for condenser and chilled water systems, and performing quantity take-offs. Your expertise in these areas will be essential for successful project execution.,

The role at Assystem STUP involves enhancing the contribution to the maturity of the EWP and TOP CAD deliverables through technical support, review, and coaching. The primary responsibilities include ensuring the applicability and completeness of input engineering data, defining and executing corrective actions for data completion, and controlling the production outputs of CAD data based on requirements and DO rules. The specific areas of focus are piping, general installation, services (HVAC), electricity, and instrumentation. Ideal candidates possess extensive experience in industrial installation and commissioning. Additional tasks include producing P&ID with Aveva Diagram, coordinating with DO for licenses in an IO environment, conducting clash analysis, ensuring correctness in 3D modeling, and managing plant mechanical commissioning. Quality management of engineering data, including BOM completion, and the implementation of engineering services review and coaching are also essential. Candidates must have experience in design, construction, commissioning, operation, and maintenance requirements, especially in an international nuclear context. Assystem STUP is dedicated to equal treatment of all candidates and promotes diversity within the company. The organization values different backgrounds and perspectives, considering them crucial for creating innovative and impactful solutions. The focus is on skills, talent, and the ability to take risks. The company encourages candidates to bring their unique contributions to help shape the future.,

As a Sales & Costing Engineer specializing in Ship Building, Refit, and Piping Projects within the Marine industry, you will be responsible for preparing accurate cost estimates, developing Bills of Materials (BOMs) based on ship visits, and coordinating various technical documentation and sales support activities. With a background in mechanical/marine engineering, piping design, and project estimation, you will play a crucial role in managing site-based responsibilities during ship refits and ensuring seamless cost approval workflows with the management. Your key responsibilities will include visiting ships and refit sites to assess scope, preparing detailed costing sheets based on site data and specifications, drafting GOW requisitions during refit projects, coordinating with project leads for updated costing documentation, assisting in sales quotations and commercial proposals, tracking inventory using Google Sheets, communicating with OEMs and manufacturers regarding pricing and delivery timelines, and maintaining documentation for tenders and technical qualifications to support business development efforts. To excel in this role, you should hold a B.Tech or M.Tech in Mechanical or Marine Engineering, with an MBA preferred in Operations, Marketing, or Project Management. Additionally, you should possess 7-10 years of experience in piping design, ship refit estimation, or industrial project costing. Proficiency in Excel and Google Sheets is essential, along with strong communication skills in English, attention to detail, the ability to work independently, and a willingness to visit ships, collaborate with field teams, and manage deadlines effectively. This is a permanent position based in Visakhapatnam, with one available vacancy. If you have hands-on experience in preparing GOWs and BOMs during live ship repair/refit projects, advanced Excel skills, and a proactive approach to cost estimation and project management, we encourage you to apply for this challenging yet rewarding opportunity in the maritime industry.,

Stantec is a global leader in sustainable engineering, architecture, and environmental consulting. The diverse perspectives of our partners and interested parties drive us to think beyond what’s previously been done on critical issues like climate change, digital transformation, and future-proofing our cities and infrastructure. We innovate at the intersection of community, creativity, and client relationships to advance communities everywhere, so that together we can redefine what’s possible. The Stantec community unites approximately 32,000 employees working in over 450 locations across 6 continents. Primary Purpose Of Job Stantec is an engineering design and remediation leader in global infrastructure, water resources, buildings, mining, power & dams, and oil & gas sectors. We provide, program management and technology solutions for the environmental, water, wastewater, energy and power markets in North Americas, Europe, Middle East, and Asia Pacific regions. Stantec’s Pune, India office is looking for a Civil designer to join our team and work in Water group. The role is to support project managers/team leaders by providing civil design (CAD/BIM) support to ensure that project outcomes in terms of budget, schedule, technical and quality standards, meet both the client and STANTEC expectations. Design and documentation of projects under the instructions and guidance of a Project Engineer using Civil Engineering techniques utilizing software such as, but not limited to, Autodesk Civil3D, Infraworks and AutoCAD in accordance with Client standards and procedures. Key Accountabilities Engineering and design of WTP and WWTP Hydraulic design of treatment units and associated piping / channels, site drainage Design of pipelines, Pipe fittings, connection details, pipeline renewal Outline design / Optioneering Detailed design Prepare technical reports Coordinate / advise designers to prepare detailed drawings Liaison with vendors Need to work off-hours for client co-ordination: Occasionally Need to travel offshore for training/on-site work: Occasionally Key Responsibilities Technically deliver the design of treatment plants, hydraulic and utility design independently. Work in collaboration with Discipline Lead, Project Lead and other discipline leads and engineers, designers. Ensure the use of consistent design standards and best practices on projects in line with the technical direction of the discipline Developing excellence by ensuring project efficiencies are achieved. Ensure that the quality programs, appropriate design procedures and systems are followed. Person specification Professionally qualified Engineer, MEng or BEng (or equivalent) in Civil Engineering / Environmental Engineering with recent experience in water and wastewater treatment and disposal. 10 to 12 years of relevant experience. At least 8 years of experience working on civil engineering design aspects for WTP and WWTP and knowledge of various treatment methodologies (e.g.ASP/SBR/MBR /MBBR etc.). Experience of working on UK frameworks Understanding of P&ID, PFD for WTP and WWTP Knowledge of GIS/CAD Excellent data presentation abilities (MS Office) Ability to work in collaborative multi-discipline engineering environment Strong verbal and written communication skills Ability to make decisions independently and strong problem resolutions skills Professionally accredited or working towards it (ICE UK/ CIWEM) Primary Location: India | Pune Organization: Stantec IN Business Unit Employee Status: Regular Travel: No Schedule: Full time Job Posting: 31/07/2025 12:07:52 Req ID: 1000559

We have an urgent requirement for Piping Forman Construction - IOCL Panipat Site- MNC Client. Job Type:- TPC Duration:- Minimum Six months (Extendable based on performance and project work). Experience – Minimum 8-10 yrs in Oil and Gas/ Chemical Plants Piping Construction/ Fabrication/ Erection. Qualification :- ITI- Mechanical Job Profile :- 1) Thorough knowledge and hands on experience of piping specification, fabrication, and erection techniques. 2) Can supervise the Site work by subcontractor. 3) Reporting to Piping Construction Supervisor/ Engineer at Site. 4) Manage and Evaluate the Progress with Quality work done by subcontractor at Site. 5) Can engage properly to the Subcontractor work force (Welder / Fitter and other) as per available Site front to achieve the required Progress.

Qualification: Diploma holder / Draughtsman Responsibilities The position calls for working as Mechanical & Plumbing Senior Modeler/ draftsman in projects task forces, with responsibilities of preparing and checking P&ID, equipment layouts, piping and Ducting layouts, Air flow diagrams, supports, MTO, etc. He should be well versed with REVIT Families, dynamo and working on BIM platform. LOD Level : LOD - 250-35