344 Maintenance Planning Jobs - Page 9

4 About the position: The Permit Writer is a team member of the Maintenance and Turnaround Planning organization within the Chevron ENGINE Center and is responsible for drafting permits for Maintenance and TAR asset teams within Chevron s LNG facilities. This role is critical for ensuring that permits are developed in accordance with Chevron practices with proper documentation to ensure the safe execution of work. Key responsibilities: Drafts permits using the electronic Control of Work (eCoW) system Works with Permit Requesters to get permits through site validation, approval, and execution processes Leverages Chevron Control of Work - Work Authorisation Manual to ensure permits shall are drafted per company policy Works with Operations and Engineering groups to identify, gather, and attach the required supporting documentation based on planned scopes of work, examples include Isolation Confirmation Certificates (ICC) and Bypass Critical Protection Certificates (BCP) Required attachments including marked up diagrams, purpose of the equipment being bypassed, the reason for the bypass, alternative means of protection, and a Level 2 Hazard Analysis. Required Qualifications: Degree in relevant Engineering or Maintenance Discipline Experienced operations (maintenance or production) background Deep knowledge in maintenance and production planning and permitry Experience working with control of work or permit to work systems and the preparation of permitry in Refineries and/or LNG facilities Demonstrated knowledge and experience with Maintenance Work Management process which involves work prioritization, planning, estimating, scheduling, executing, and closing out maintenance work Preferred Qualifications: 5+ years of field experience supporting the planning and execution of maintenance activities in a complex processing facility Prior Maintenance Planning experience in Refineries and/or LNG facilities Proficient in Excel, JDE, SAP, Prometheus, Primavera P6 Prior experience using Permit Vision or other electronic Control of Work systems Demonstrated track-record of proactively identifying solutions to problems before they arise and developing contingency plans Chevron participates in E-Verify in certain locations as required by law.

About the position: The Turnaround Planner is a team member of the Maintenance and Turnaround organization within the Chevron ENGINE Center. The role provides turnaround and maintenance planning support to Chevrons Refining and Liquified Natural Gas (LNG) assets. This role will support the development of detailed job plans and accurate resource estimates for turnaround work scope. This position will collaborate across multiple levels of the organization and within multi-discipline teams including Operations, Engineering, Maintenance, and Reliability. This role forms part of a larger Maintenance Turnaround Planning network across Chevron. Key responsibilities: Develop fully integrated job estimates and work plans for multiple concurrent facility turnarounds across several operating assets. The Planner will work closely with Operations, Technical, and the Turnaround Core Teams to generate the tasks that feed into detailed plans and schedules The Engine Planner will work with Turnaround core team members in Chevrons Refining and LNG assets to develop cost and schedule estimates Validate turnaround scope is complete and assist with scope submissions for final evaluation Ensures scope plans are accurately detailed in appropriate scheduling tools (Primavera) Works closely with Procurement to order and track long lead material for large turnaround and capital project scope Develop Plot Plans and scope plotting density. Assist Turnaround Maintenance Team Leads on all deliverables for Peer Reviews Coordinate with operating facilities and contractors as necessary to ensure turnaround schedule alignment, analyze schedule data, and provide regular updates to stakeholders Document all lessons learned from all Phases of turnaround planning Adopt digital tools as rolled out for use and provide feedback to product owners Applies industry standards and best practices for Turnaround planning and execution while collaborating with cross-functional teams across Chevron refineries and LNG facilities Required Qualifications: 3-5 years of field experience supporting the execution of maintenance turnarounds for complex process facilities Degree in relevant Engineering or Maintenance Discipline 5 years relevant turnaround execution and planning experience providing technical and turnaround planning support to plant turnaround teams in a complex oil and gas operating environment is preferred Knowledge of scheduling tools (Primavera) and planning tools (salesforce) is preferred Experience in supporting Operations within the Refining or LNG industry is preferred Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law.

Strong understanding of SAP PM module functionalities and best practices. understanding of plant maintenance processes, including preventive, corrective, and predictive maintenance. Ability to manage project timelines, resources, and deliverables. Required Candidate profile Ability to communicate effectively with clients, gather requirements, and present solutions. Knowledge of SAP system configuration, customization, and testing. .

To look after all routine and preventive maintenance activities of plant machinery , ensuring optimal performance and minimal downtime.

Description We are seeking a highly experienced Plant Head to lead our manufacturing facility in India. The ideal candidate will have a proven track record in plant operations and management, with a focus on optimizing productivity and ensuring high standards of quality and safety. Responsibilities Oversee the entire operations of the plant, ensuring efficiency and productivity. Develop and implement operational strategies to meet company goals. Manage budgets and optimize resource allocation to improve profitability. Ensure compliance with safety regulations and maintain a safe working environment. Lead, mentor, and develop the plant management team and staff. Collaborate with other departments to align production with business objectives. Monitor production processes and make necessary adjustments to optimize performance. Implement continuous improvement initiatives to enhance operational efficiency. Skills and Qualifications Bachelor's degree in Engineering, Manufacturing, or related field; Master's degree preferred. 15-20 years of experience in plant management or a similar role. Strong knowledge of manufacturing processes, quality control, and supply chain management. Proficiency in lean manufacturing principles and methodologies. Excellent leadership and team management skills. Strong analytical and problem-solving abilities. Effective communication and interpersonal skills. Ability to manage budgets and financial reports. Familiarity with safety regulations and quality assurance standards.

Role & responsibilities Replenish inventory of LPG bottling consumables. Co-ordinate with logistics to ensure that the indents are serviced in packed segment. Ensure proper daily line ups for both bottling & bulk operations Updation of CMMS and Optimus as per agreed timeline. Carrying out daily tool box talk for Workers before start of the operations. Tier 2 Safe to Load inspections of both bulk & packed trucks Complete responsibility of productivity of the Bottling operations and MT packed per Man-hour. Vehicle turnaround time of the packed segment to be as per the agreed KPIS. Planning of workmen activity for production, bulk loading and other activities as per the demand. To ensure 100% of the indents are executed on a daily basis for the bottling segment (On Time & Full) Co-ordination with OIC-Logistics for the vehicle availability. 100% reporting of Incident / Accident in the prescribed format To meet the Carrousel Output of 500 cylinders/Hour.. Overall responsibility of the segregation and storage of cylinders. Control of consumables in Bottling and ensuring of the KPIS to be met with regards to consumables usage. Overall responsibility of up keep of machinery and reduction in down times during production runs and to ensure that preventive maintenance schedule is adhered to. Implementation of technical integrity at plant and inspection of safety critical barriers as per schedule Issuing of work permits, conducting safety green lights , Preparation of Prevention plan/MOC/HIRA along with HSE Conducting Tool box talk/Training before starting the project work. Managing the stores inventory with proper document for material movements Carrying out the projects preparation, BOQ , vendor selection, coordination with HSEQ for contractors training, etc. Co-ordination with Maintenance Executive to ensure that the down time of the bottling machinery is minimized and the problems with regards to the equipment are addressed. Understanding of Total’s Golden Safety Rules, Implementation of the same and encouraging / motivating Staff / workers reporting to them for implementing the same Implementation of MAESTRO at plant. Display of “Total Attitude” in day to day working and encouraging / motivating Staff / workers reporting to them for implementing the same. Payroll will be 3rd party called Quess Corp Interested candidates share resume at below Mail ID priyanka.k@external.totalenergies.com 8976988545

Responsible for efficient operation of both our electrical panel manufacturing processes and the upkeep of our facility infrastructure(Building maintenance).Facility Maintenance, Preventive Maintenance, Troubleshooting & Repairs ,Energy Efficiency.

Job Summary: We are seeking a skilled and dependable Factory Maintenance Technician with a minimum of 5 years of experience in industrial maintenance, preferably within Aluminium Composite Panel (ACP) manufacturing . The ideal candidate must have hands-on experience in maintaining Color Coating Lines, addressing frequent machinery breakdowns, and implementing preventive maintenance systems. This role is critical in ensuring uninterrupted production through timely repairs and systematic maintenance tracking. Key Responsibilities: Troubleshooting & Repairs: Diagnose and resolve mechanical, electrical, and pneumatic faults in ACP machinery and color coating lines. Attend to frequent breakdowns with a focus on minimizing production downtime. Conduct immediate and emergency maintenance as required. Color Coating Line Maintenance: Perform routine maintenance and troubleshooting of color coating line equipment including unwinders, coaters, curing ovens, and rewinders. Ensure coating quality is not impacted by mechanical faults or process irregularities. Monitor heating and curing systems, roller alignment, and web tension control mechanisms. Preventive Maintenance: Execute scheduled maintenance based on OEM recommendations and internal SOPs. Record and monitor key check points for machines like lamination lines, extrusion systems, cutting units, and color coating sections. Identify early signs of equipment wear and recommend timely action. Maintenance Records & Reporting: Maintain daily logs of all maintenance tasks, breakdowns, and part replacements. Document maintenance checklists, schedules, and reports systematically. Assist in preparing maintenance KPIs and machine performance reports. Inventory & Tools Management: Track and manage maintenance inventory and spare parts. Ensure all tools and equipment are in proper working condition. Safety & Compliance: Follow all industrial safety protocols during maintenance work. Ensure machines comply with health, safety, and environmental standards after service. Qualifications and Experience: Minimum 5 years of industrial maintenance experience, preferably in ACP and Color Coating Line operations. ITI or Diploma in Mechanical, Electrical, or Industrial Maintenance. Proven knowledge of mechanical systems, electrical panels, pneumatics, and color coating processes. Ability to read and interpret technical manuals, schematics, and control diagrams. Proficient in using maintenance software or logbooks for tracking work.

Role & responsibilities Preventive & Corrective Maintenance: Plan and execute preventive maintenance schedules for all hospital infrastructure including electrical systems, HVAC, plumbing, elevators, medical gas pipeline systems, fire safety systems, and biomedical equipment. Facility Management: Oversee the day-to-day operations of all hospital facilities to ensure optimal functionality and compliance with safety and health regulations. Vendor Management: Liaise with external contractors and service providers for outsourced services and equipment maintenance. Ensure quality standards and cost efficiency. Team Leadership: Lead and supervise a multidisciplinary team of technicians, electricians, plumbers, and biomedical engineers. Provide training, scheduling, and performance evaluations. Compliance & Safety: Ensure all systems comply with hospital safety standards, statutory regulations (e.g., NABH, ISO, fire safety norms), and environmental requirements. Budgeting & Reporting: Prepare and manage the maintenance budget. Maintain accurate records of maintenance work, equipment servicing, and incidents. Emergency Management: Respond promptly to emergency breakdowns and ensure minimal disruption to clinical services. Strong knowledge of hospital systems including HVAC, fire alarms, DG sets, STP/ETP, medical gas pipelines, etc. Familiarity with compliance standards such as NABH, ISO, and local municipal laws Preferred candidate profile * Candidates from hospital background will only be preferred. * Interested Candidate can share their CV at ayesha.tabassum@iqct.in

Role & responsibilities Sr. Mechanical Engineer (Infra Projects): Apco Infratech Pvt Ltd(www.apcoinfra.com) is urgently looking for Sr. Mechanical Engineer. Minimum 15 years of post-qualification experience. Should have minimum 10 years experience in Mechanical works associated with road, bridge projects. Must have hands on experience in erecting batching plants, workshops, weighbridges etc.. Installation commissioning operation and maintenance of gantry cranes. Monitoring machine maintenance and repair cost with respect to budgeted cost by doing preventive maintenance. Finalizing all spare and oil requirement by maintain minimum stock as per physical stocks. Training machine operators and mechanics for optimal performance. Must have hands on experience in SAP ERP (Work order creation, Repair order creation and purchase indents etc) Work Location: Mumbai Suburbs. Please send your updated resume to sapatil@apcoinfra.com Preferred candidate profile Qualification: BE/B. Tech (Mechanical) from reputed (UGC Recognized University) Must have verifiable 15 Years post qualification Experience.

Your Role Ensure to provide best in class field service at the customer site and represent VTS brands This can include all service activities from planned maintenance to troubleshooting and commissioning To take care preventive maintenance is done according to provided guidelines and Standard Operationg Procedures with the proper, supplied tools Proactively building up customer relationships and spotting of business opportunities whilst being on site Proactively generate leads for the Sales team Provide technical support in the form of troubleshooting either by phone or on site Opportunity to become certified as internal part-time trainer to provide trainings internally and help colleagues within the organization to grow their technical knowledge and ability Share lessons learned with colleagues to enhance exchange of experiences and foster a strong network Communicate service and other relevant activities to Customer and VTS Regional Manager This would be through daily service reports or relevant forms, e-mail and telephone communications Prepare information as requested whether routine or for special occasions and ensure that the customer receives proper service reports Collaborate with the internal team to find optimal solutions in case of breakdowns, expanding of customers activities or other customer specific situations In general give the best advice possible for the customer Make sure promises are kept Ensure a neat working environment, clean tools and proper administration Ensuring Invoicing for rendered Services and payment follow up till reciept of payment Ensure you work according to the company s safety guidelines, follow any customer specific safety guideline on-site In addition, you are expected to conduct Last Minute Risk Assessments and know the decontamination info from the records Always use necessary and prescribed Personal Protective Equipment To succeed, you will need Diploma in Mechanical Engineering Minimum 3 yrs relevant experience in related field Applicants who are already working as Service Engineer will have added advantage Knowledge of vacuum pumps preferred Read and understand OEM manuals and drawings Ability to work with hand and power tools, and ability to operate hand operated pallet trucks if necessary Full knowledge of hand tools and measuring devices In return, we offer you We believe there is always a better way Being open for change and feedback is what defines our culture We support you on your journey: individual learning opportunities, worldwide job opportunities, and technical training from our Air Academy You will be equipped with a company vehicle, work clothes, and specialty tools The safety and well-being of our employees is important to us, which is why we set high standards for your workplace safety We offer a fair compensation package We offer health insurance, paid leave, and retirement benefits We offer a diverse working environment that is collaborative and aims to create a workplace where you will be valued, proud, empowered, respected, developed and rewarded City Bangalore

Work Schedule Standard Office Hours (40/wk) Environmental Conditions Laboratory Setting, Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.) Job Description About Chromatography & Mass Spectrometry Division! The Chromatography and Mass Spectrometry business creates innovative instruments, consumables, and software solutions for analytical sciences. Roles and Responsibilities: Support Thermo Fisher customers through technical service, installation, operation, training, and repair of specialized analytical equipment like HPLC and CAD (Aerosol detector). Undertake product installation on client premises and demonstrate features related to 21 CFR compliance. Provide training and technical advice on instrument use, both in person and by phone, sharing Dos and Don ts for optimum performance of the system. Investigate difficulties and solve faults arising from operation or utilization. Rectify problems, suggest solutions, or arrange for repairs to be made. Provide a vital link between customers and Sales and Marketing. Ensure effective service is provided to the customer by maintaining communication between the customer and the company. Monitor repairs in terms of the organization s service/warranty cover and make suggestions for product improvements. Carry out planned maintenance calls and perform regular customer visits. Make recommendations about spare parts requirements and assist with monitoring equipment. Achieve assigned spares and service revenue targets by promoting PM kits, instrument upgrades, and software upgrades. Extensive traveling within the territory is required, with potential travel outside the territory if needed. Knowledge, Skills, and Abilities: Bachelor of Technology (Biotechnology/Electronics). 4 to 5 experience in analytical equipment like HPLC and CAD (Aerosol detector). Proficient in written and verbal communication. Interpersonal skills needed for a role that involves interacting with various individuals within and outside the company. Ability to prioritize service requests and produce clear and concise documentation. Self-motivated and proactive in technical and support approaches. Work closely with customers to understand their pain areas and act as a consultant between the organization and the customer, helping both achieve regional commercial goals. Build good rapport with customers and educate them about the procurement of PM kits annually, reducing system downtime.

Role & responsibilities Lead and manage the entire maintenance department, including mechanical, electrical, and utility maintenance teams. Plan, schedule and oversee preventive and corrective maintenance of machinery including weaving,dyeing, finishing, cutting, stitching, and packaging units. Ensure all machines and utility equipment are in optimal working condition. Minimize downtime through effective planning, monitoring, and quick troubleshooting of breakdowns. Manage spare parts inventory and procurement to avoid operational disruptions. Ensure adherence to safety, health, and environmental regulations. Collaborate with production and quality departments to align maintenance activities with production schedules. Lead root cause analysis (RCA) of recurring mechanical/electrical failures and implement long-term corrective actions. Develop maintenance KPIs, prepare reports, and recommend cost-effective improvements. Train and mentor junior engineers and technicians. Liaise with external vendors, service providers, and equipment manufacturers for maintenance support and upgrades. Preferred candidate profile: Minimum 15 years of experience in industrial maintenance, preferably in textile, weaving manufacturing plants. Bachelors degree in Electrical Engineering (preferred); degrees in Mechanical or Industrial Engineering may be considered with relevant experience. Proven leadership and team management skills. In-depth knowledge of textile production machinery and related systems. Excellent problem-solving and decision-making capabilities. Strong understanding of preventive and predictive maintenance practices. Familiarity with industrial safety protocols and compliance requirements

Role & responsibilities :- Initiate, implement, and manage the plant maintenance program based on best practices in the PET plastic recycling field, with an emphasis on planning/scheduling and preventive/predictive maintenance Monitor the use of inventories of spare parts, maintenance supplies, and equipment and initiate reordering when necessary Maintaining and repairing maintenance of shop equipment Establish and maintain a computerized maintenance management system (CMMS) for tracking work orders, spare parts, and maintenance history of plant equipment Maintain and update operating and training manuals for the maintenance department Monitor operation of plant equipment and systems and provide technical and process related solutions for improvement Review the operation of plant equipment and systems constantly, to minimize unplanned downtime, solve problems in a timely manner Initiate and carry out projects that improve efficiency and/or reduce operating costs Track, analyse and improve key maintenance parameters such as asset utilization, maintenance cost, PM compliance, schedule compliance, etc. Maintain safety, health, and environmental policies and procedures, and communicate with QHSE departments to ensure compliance with applicable procedures, rules and laws by maintenance department staff and operations Direct, maintain, and enforce the safety program for the maintenance department; review safety records to uphold standards of maximum safety for all maintenance technicians Communicate with, and coordinate activities with all Plant Operations Departments, to ensure all required works are carried out, with the minimum disruption to process activities Develop, maintain and analyse periodical reports related to relevant KPIs, present them to the management and recommend areas for improvement by providing detailed solutions for approval Ensure all used technical equipment is in strict compliance with all local laws and regulations Monitor the performance of all team members, set targets, assess the achievements and provide regular feedback to staff Motivate the team to achieve targets and support when needed Analyse the Training needs and ensure that training on-the-job and/or external is provided when needed and all team members have the latest knowledge about used technology and machines within the plants Assist with hiring of maintenance staff by conducting assessment tests and interviews Preferred candidate profile : Having experience in RPET Washing line

Role & responsibilities AWH / Journal /PIN CNC Grinding machines- Micromatioc /Fortuna/PMT/TOYODA Work head belt, bearings replacement Spindle & Hydrostatic Guide ways checking ,dresser axis alignment checking Tailstock checking Lubrication, Hydraulic, Coolant system maintenance Backlash checking & adjustment VMC/HMC machines- AMS/BFW/HAAS/DMG Ball screw & bearings replacement Drawbar maintenance Spindle Orientation setting, ATC alignment & setting parameter CAM box checking, cam & follower bearing replacement Index table alignment checking Backlash checking & adjustment Lubrication, Hydraulic, Coolant system maintenance Gear Hobbing Machine: Mitsubishi/Pfauter/Gleason Arbor checking & bearings replacement Table( C-axis) checking Backlash checking & adjustment Ball screw & bearings replacement Lubrication, Hydraulic, Coolant system maintenance Fanuc 0i-MB/MC/TB/TC and Siemens control can able to operate ABRO balancing machine Super finishing machine Shall be working in shift duty For Electrical Engineer following knowledge and experience is must: Cylinderical/AWH Grinding machines- Micromatic/Fortuna/PMT Induction Hardening machine- Maintenance of generator panel/Control card/Power panel CNC Turning/VMC/HMC machines- AMS/BFW/HAAS Siemens sinumerik 840D, 802D, 810D control- Parameters setting/input output checking/ Wiring tracing Fanuc 0i-MB/MC/TB/TC control - Parameters setting/input output checking/ Wiring tracing/Back-up loading Delta/ Siemens S7200/300/400 -PLC logic modification, Back-up downloading & uploading, Trouble shooting HT/LT knowledge & work experience Preferred candidate profile Position - Engineer Education - BE- Electrical, Diploma Electrical Experience - 8 to 10 years in Automobile, Auto Ancillary, Auto Component industry Location - Sanaswadi, Pune Nagar Road

Job Description To carry out all the utility activities like Boiler operation, Fork Lifts, Chilling plant / Air compressors operations and their maintenance as per maintenance program. To support all utility users requirements Job Responsibilities Ensuring all maintenance activities as per Maintenance Preparation and modification of Maintenance programs as per operations requirement Ensuring 100% availability of utilities to support and meet production targeted volumes Co ordination in preparing Project and Non Project planning activities as and when required Co ordination in supervising and implementing Project and Non project works Supporting customer departments in achieving yearly targets ( PRS & Non PRS targets Active participation in implementing systems like ISO 9000 , ISO 14001 etc Guiding all reportees in their day to day work Preparation of skill gap analysis for direct reportees and ensuring training for the same To keep watch on spares by taking monthly stock of the same To keep fork lifts in running condition To observe GMP in fork lift dept by daily cleaning and maintaining the Fork lift Dept clean and tidy - Job Requirement Education: B. Tech /BE -Electrical/ Electronics Engineering Work Experience: Minimum 6 years in similar function area Must be from a FMCG/Food /Beverage Industry FUNCTIONAL COMPETENCIES & SKILLS: Must have good knowledge of basic components & mechanisms of an Equipment Must have a hands on experience of Equipment maintenance , preparation of Maintenance Plans, Spares management Must have hands on experience in shift operations & man management. Should have worked in shifts for at least 2 years Must be having background of Food /FMCG/ Beverage industry. Exposure to Beverage Bottling operations will be an added advantage Must have basic knowledge of TPM Basics – CLIT, PM, Kaizens Must be having basic knowledge of RCA tools such as Why-Why Analysis, Fish Bone analysis Must have basic knowledge of Safety Risk Assessment tools, Emergency Plans, Hazard Identification, Work Permit System Must have basic knowledge about Hygiene, 5S, Food Safety Standards, HACCP

Effective 24-hour depot plan management Optimization of depot usage and resources Coordination of train movements and handovers Real-time support and management of forward-facing defects Timely reporting and notice submission to customers Strategic project fleet management aligned with contractual and business needs Degree in Engineering or equivalent qualification Experience or understanding of maintenance planning in a rail environment Knowledge of metro train systems and troubleshooting Familiarity with IT tools such as SAP, MS Project, Maximo, etc. A certification in project management or similar. Strong organizational and communication skills Flexibility with working hours

Role & responsibilities A "maintenance head" in the textile is responsible for overseeing all aspects of equipment and facility maintenance within a textile mill or factory . This includes planning, scheduling, and executing maintenance activities, managing technical teams, ensuring safety compliance, and optimizing equipment performance. Preferred candidate profile Technical Expertise: A comprehensive understanding of textile machinery, including different types of equipment (e.g., Coating, Dyeing, Jet , Jigar, Boiler, weaving, sizing), and their maintenance requirements is essential. Leadership and Management: This involves effectively managing a maintenance team, delegating tasks, and ensuring that maintenance activities are carried out efficiently and effectively. Communication and Collaboration: The ability to communicate clearly with team members, production staff, and senior management is crucial for coordinating maintenance activities and addressing issues promptly. Proactive Maintenance Planning: Establishing and implementing preventive maintenance procedures, using a CMMS (Computerized Maintenance Management System) to schedule work, and proactively addressing potential issues before they lead to breakdowns are vital. Safety Knowledge: A thorough understanding of safety regulations (e.g., OSHA Standards) and the ability to implement safety protocols to protect the workforce are essential. Problem-Solving: The ability to troubleshoot mechanical issues, diagnose problems, and develop solutions to minimize downtime is critical. Budget Management: Effectively managing the maintenance budget, allocating resources, and controlling costs are important for ensuring the long-term sustainability of the textile plant. Adaptability: The textile industry is constantly evolving, so the ability to adapt to new technologies and changes in production processes is important. Continuous Learning: Staying up-to-date with the latest maintenance technologies, best practices, and safety regulations is essential for maintaining a competitive edge

Develop & implement maintenance schedules, plans & procedures to ensure minimum downtime & maximum plant availability Oversee the maintenance & repair of all plant equipment, including boilers, turbines, pumps, & electrical systems

Role & responsibilities Experience in Plant maintenance, planning and inventory management. Developing and implementing maintenance schedules, including preventative maintenance plans for all machinery, equipment, and facilities. Overseeing maintenance personnel, training them on safety procedures, and coaching them on best practices Monitoring equipment performance, identifying potential issues, and recommending repairs or replacements Ensuring construction equipment are properly maintained and repaired Implementing preventative maintenance programs to minimize downtime and equipment failures Identifying areas for improvement in maintenance processes and implementing changes Maintenance of plant equipments and components with improvement in reliability and Maintenance Planning/scheduling, Monitoring & Control, Inventory Control. Preparation of budget/monthly reports and monitoring of Material /service expenses of maintenance services. Maintenance of BOM and other documentation/records in SAP for procurement activities/future purposes Exposure of SAP PM/MM Module is must Preparation of PRs and Management approval Coordination and communication with other departments and vendors for activities related to plant machinery maintenance Preparation of all types of MIS reports for as per management requirement (Daily, Weekly and Monthly etc.) related analysis and forecast Planning & forecasting the material requirements Ensure materials interchangeability as to provide alternative or equivalent materials for use it helps in reduce inventory level and avoid extra purchase. Ability to identify and resolve issues related to maintenance activities and parts inventory. Familiarity with various construction Equipments Preferred candidate profile Experience: 5 - 10 years in Mechanical Maintenance Department, Experience in construction company will be an advantage Qualification: BE Mechanical, Preferred MBA in Operation Management

The maintenance mechanic will be responsible for performing regular checks and planned maintenance activities on the Hard Capsule Machine (HCM) and attend to routine and recurring issues. Key Responsibilities: Responsible for performing weekly and Monthly checks and planned maintenance activity on HCM(Hard Capsule Machine). Attends routine and repeating HCM issues- Sensor stops, Manual stops and Capsule quality. Also Supports size changeovers and ensures HCM Stabilization for consistent and efficient operations. Carry out PMs as per Procedure. Carry out actions based on observations listed in Daily checks. To crosscheck and keep ready kits/parts and sub- assemblies required for Planned Maintenance. To stop machine and carry out maintenance as decided in Morning meetings/ Supervisor To take part in size changes, any other job as decided by the Maintenance Supervisor. To check daily STAS and troubleshoot repeating Stops, Long stops and do RCA with the Maintenance Supervisor. To actively participate with Quality Teams for Scrape Holes, Length etc. To fill all records as required by procedures. To adhere to EHS and GMP/GDP guidelines Knowledge of the lathe and milling operations. Key Requirements: Minimum ITI (Mechanical) education would be preferred. 2-6 Years in HCM maintenance. Trouble shooting skills for STAS codes & Capsule defects. Machine Maintenance Skills. Every day, Lonza s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically. People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference. Lonza is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a qualified individual with disability, protected veteran status, or any other characteristic protected by law.

Work Schedule Standard (Mon-Fri) Environmental Conditions Adherence to all Good Manufacturing Practices (GMP) Safety Standards Job Description Job Description When you join us at Thermo Fisher Scientific, you ll be part of an inquisitive team that shares your passion for exploration and discovery. With revenues of more than $40 billion and the largest investment in R&D in the industry, we give our people the resources and chances to create significant contributions to the world. Location/Division Specific Information When you are part of the team at Thermo Fisher Scientific, you ll do important work. Surrounded by collaborative colleagues, you ll have the support and opportunities that only a global leader can give you. Our respected, growing organization has an exceptional strategy for the near term and beyond. Take your place on our strong team and help us make significant contributions to the world. Discover Impactful Work: Carry out Installation, maintenance, and support of Thermo Fisher Scientific s range of GC/GCMS instruments in professional, reliable and customer-orientated manner. Additional service experience of HPLC, AAS or ICPOES will be added advantage. Provide training to customers in the operation and maintenance of equipment. Responsibility for meeting customer SLA and internal critical metric objectives To achieve service revenue budget by championing company products, developing strong customer relationships and working closely with commercial and operations teams To be highly responsive and proactive in dealing with customer s needs and maintain close relationships with Company Sales, Marketing and Service teams to assure quality outcomes for all service & product issues raised. To carry out your employment in an efficient and commercially appropriate manner Education B. Sc in Chemistry, Bachelor s in engineering or Equivalent. Experience 4+ years of hands-on experience servicing GC/GCMS equipment. Knowledge, Skills, Abilities Conduct on-site installation of GC/GCMS equipment and follow testing procedures to ensure accurate working order. Conduct on-site scheduled planned maintenance visits. Provide troubleshooting and repair support for customers. Cultivate and develop positive working relationships with customers, system users and company personnel. Complete and submit field service reports. Provide training for customers and users on system maintenance Provide feedback to product quality teams. Provide feedback for various reports including identifying and isolating outstanding problems with system. Must have strong interpersonal and effective communication skills. Work independently and as part of a group, to accomplish individual and team objectives as well as resolve routine customer concerns. Demonstrate Thermo Fisher Scientific values - Integrity, Intensity, Innovation, and Involvement Benefits We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation! Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued. Apply today! http://jobs.thermofisher.com Thermo Fisher Scientific is an EEO/Affirmative Action Employer and does not discriminate based on race, colour, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability or any other legally protected status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Please copy paste the below link in your browser to apply https://jobs.exxonmobil.com/job-invite/80724/ Job Title: Chennai Career Event - Applications Invited for Maintenance Engineer (CMMS) About us At ExxonMobil, our vision is to lead in energy innovations that advance modern living and a net-zero future. As one of the worlds largest publicly traded energy and chemical companies, we are powered by a unique and diverse workforce fueled by the pride in what we do and what we stand for. The success of our Upstream, Product Solutions and Low Carbon Solutions businesses is the result of the talent, curiosity and drive of our people. They bring solutions every day to optimize our strategy in energy, chemicals, lubricants and lower-emissions technologies. We invite you to bring your ideas to ExxonMobil to help create sustainable solutions that improve quality of life and meet societys evolving needs. Learn more about our What and our Why and how we can work work together . ExxonMobils affiliates in India ExxonMobils affiliates have offices in India in Bengaluru, Mumbai and the National Capital Region. ExxonMobil’s affiliates in India supporting the Product Solutions business engage in the marketing, sales and distribution of performance as well as specialty products across chemicals and lubricants businesses. The India planning teams are also embedded with global business units for business planning and analytics. ExxonMobil’s LNG affiliate in India supporting the upstream business provides consultant services for other ExxonMobil upstream affiliates and conducts LNG market-development activities. The Global Business Center - Technology Center provides a range of technical and business support services for ExxonMobil’s operations around the globe. ExxonMobil strives to make a positive contribution to the communities where we operate and its affiliates support a range of education, health and community-building programs in India. Read more about our Corporate Responsibility Framework. To know more about ExxonMobil in India, visit ExxonMobil India and the Energy Factor India. ExxonMobil is organizing scheduled in-person interviews at Chennai on July 5th and 6th, 2025 for Maintenance Engineer (Computerized Maintenance Management System) roles. Work Location: Bengaluru (Last date to apply is 27th June 2025) Note: Shortlisted candidates will receive an interview invitation letter from recruiting team What role you will play in our team Provide leadership and guidance in Maintenance Management & Materials Management as a Maintenance Engineer (Computerized Maintenance Management System) from Technology Center in Bengaluru, Karnataka What you will do Provides leadership, guidance and directional support in Maintenance Management & Materials Management from Technology Center Responsible for mentoring junior engineers & overseeing work being delivered by service providers around Computerized Maintenance Management System (CMMS) in Maintenance & Spares Management. Effectively communicate across various levels of work force within and outside the company, i.e., contractor, working level teams and leadership Develop new processes & bring continuous improvement in Maintenance Management & Materials Management through KPI monitoring and utilizing experience About You Skills and Qualifications Bachelor’s degree in Engineering (preferably Mechanical, Electrical & Instrumentation) from a recognized university with CGPA 7.0 or above Minimum 5 years’ experience in Oil and Gas Production/Operations or similar industry experience Minimum 2 years of hands-on experience in the field of Maintenance (Routine, Shutdown, Condition Based, etc.) & understanding of Reliability concepts (Equipment Maintenance Strategy, RCM, etc.) Minimum 5 years’ experience in Field Maintenance, CMMS (SAP) Maintenance and/or Materials Management Proficient in Asset Master Data Management and Governance Understanding of Asset Hierarchy, Asset Register, Functional Location, and Spare Parts Management Proficient in SAP Maintenance Management practices such as development of Maintenance Plan, Maintenance Item & Task List and manage planning and scheduling Facilitate the implementation of SAP PM & MM Facilitate workshop to collate business requirement and propose business process and/or system enhancement Thorough technical knowledge of various Oil & Gas industry equipment and services Able to understand engineering drawings and spares management philosophy Ability to understand and coordinate cross discipline work The role will be based in Bangalore and may require extended periods of international business travel Ability to work in shifts as required Should be willing and able to take extended international business trips as may be needed to any of the company sites Should be comfortable in relocating to Bengaluru and working in morning (9 to 18 hours) or evening (13:30 to 22:30 hours) shift time. Preferred Qualifications/ Experience Proficient in Enterprise Applications such as SAP (PM-Plant Maintenance, MM- Material Management & QM-Quality Management) Knowledge on SAP S/4 HANA preferred Basic Knowledge/experience in data analytic tools (PowerBI , Tableau, JMP, etc.) is advantage Strong Analytical Skills Proficient in Microsoft Office applications (Excel, Word, PowerPoint) and SharePoint Excellent verbal and written communication skills in English Should not have attended an interview for Maintenance Engineer (CMMS) position in the last 1 year Your benefits An ExxonMobil career is one designed to last. Our commitment to you runs deep: our employees grow personally and professionally, with benefits built on our core categories of health, security, finance and life. We offer you: Competitive compensation Medical plans, maternity leave and benefits, life, accidental death and dismemberment benefits Retirement benefits Global networking & cross-functional opportunities Annual vacations & holidays Day care assistance program Training and development program Tuition assistance program Workplace flexibility policy Relocation program Transportation facility Please note benefits may change from time to time without notice, subject to applicable laws. The benefits programs are based on the Company’s eligibility guidelines. Stay connected with us Learn more about ExxonMobil in India, visit ExxonMobil India and Energy Factor India. Follow us on LinkedIn and Instagram Like us on Facebook Subscribe our channel at YouTube

Job Title : Maintenance Technician Mechanical/Electrical Location : [Insert Location] Experience : 2–5 years of hands-on experience in mechanical, electrical, or general plant maintenance, preferably in a manufacturing setup. Role Objective To ensure smooth and uninterrupted operation of plant machinery and utilities through effective maintenance practices. The technician will be responsible for performing routine preventive maintenance, troubleshooting breakdowns, and supporting improvement activities in the maintenance department. Key Responsibilities Preventive & Breakdown Maintenance Carry out scheduled preventive maintenance of machines, equipment, and utilities. Attend to machine breakdowns and resolve issues promptly to minimize downtime. Assist in root cause analysis and implementation of corrective actions. Mechanical/Electrical Maintenance Perform mechanical tasks such as bearing replacement, alignment, lubrication, and welding (if applicable). Handle electrical maintenance tasks such as wiring, motor rewinding, switchgear checks, and control panel troubleshooting. Maintain proper documentation of repairs, maintenance logs, and spares usage. Utilities & Support Equipment Monitor and maintain compressors, DG sets, HVAC, cranes, and other plant utilities. Ensure timely maintenance and calibration of safety and utility devices. Spare Management & Safety Maintain adequate stock of frequently used spares and raise indents as required. Follow safety protocols strictly while performing maintenance jobs. Support the team in implementing 5S and TPM practices in the maintenance area. Continuous Improvement Suggest and implement small improvements to enhance equipment life and performance. Participate in Kaizen, 5S, and energy-saving initiatives. Key Qualifications Educational Background ITI (Fitter/Electrician/Machinist/Wireman) or Diploma in Mechanical/Electrical Engineering or relevant trades. Experience 2–5 years in maintenance of machines and utilities in a manufacturing or industrial setup. Exposure to electrical panels, mechanical assemblies, and plant maintenance activities preferred. Skills Ability to read and interpret technical drawings and wiring diagrams. Basic knowledge of safety procedures and lockout-tagout (LOTO) practices. Hands-on experience with tools, instruments, and maintenance equipment. Behavioral Competencies Team player with a proactive approach to solving problems. Willingness to work in shifts and respond to urgent maintenance calls. Commitment to safety, discipline, and documentation.

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview The Aerospace, Defense and Marine (Aerospace, Defense and Marine or AD&M) business unit of TE is part of the Industrial Solutions segment (Industrial Solutions) and is a world leader in the design of components and electrical interconnection solutions that are used for applications in extreme and rigorous environments. These interconnection solutions make possible applications of avionics, jet and propulsion engine management, flight controls, grounding systems and on-board entertainment for today's "connected aircraft". This capability is extended to military, marine, aviation, space, land and drone vehicles, as well as oil and gas exploration of open-ocean deposits. TE offers solutions for enhanced connectivity that work and resist in the most extreme environments on Earth, from the deepest oceans to the ends of space. ROLE OBJECTIVE NC collection, review / MRB Dispositions / Piece Part rejections handling- co-ordinate with incoming quality / Rejection summary reports / Quality cost reports preparations Responsibilities Day to day general maintenance and monitoring of plant utilities such as : 1. Generator 2. Compressor 3. LT Panel 4. Electrical & Civil maintenance (furniture s, fixtures & fitting, plumbing etc.,) Routine & periodical checks of machines & equipment s used for production as per the planning Must put a visible maintenance planning on each equipment and prepare a maintenance planning for the tools. Executing the preventive maintenance as per the planning. As well review & validate the effective functioning of equipment. Effective handling of break down maintenance, by studying MTTR, MTBF & other effectiveness monitoring tools. Effective communication, as well as analytical and problem-solving skills Maintain records of preventive and break down maintenance as per ISO and AS requirement. Effective monitoring & implementation of permanent action about breakdown. Knowledge & execution of continual improvements, SMED etc To keep list of machineries and equipment s and check list. Define and maintain an inventory of spares in order to repair the equipment s as per the technical documents. Prepare specifications for purchase of materials & spares. Knowledge on TPM, and other basic tools. To Co-ordinate for installation and setup activity. Assure product quality by testing product and system capabilities (Cm, Cmk) Adequate knowledge about PLC/CNC controls. & Monitoring of electrical equipment. Liaising with supplier, fabricators & other contractors. Develop budgets, estimating labor, material costs. Plan layout of electric power generating units, pneumatics lines and distribution lines and stations. Prepare and study technical drawings, specifications of electrical systems, and operations conform to standards and customer requirements. Ensure EHS standards are being implemented and followed. Supervising the team of permanent and temp workforce Ensure that required AMCs are established and that the contracts are renewed periodically. Keep equipment operational by following manufacturer s instructions and procedures. Requesting service repairs. Should bring improvement proposals in respect cost controlling and improvement activities. Candidate Desired Profile: EDUCATION/KNOWLEDGE / QUALIFICATIONS & EXPERIENCE BE/BTec E&C/ E&E / Mechatronics or equivalent. CRITICAL EXPERIENCE Minimum 10-12 yrs in maintenance TECHNICAL COMPETENCIES PLC/CNC Controls/Automation supports with Vision system Electrical and Mechanical Systems. Basic Knowledge on Pneumatic /Hydraulic systems. BEHAVIOURAL COMPETENCIES Good communication skills Strong Presentation skills Organizing and Time management skills Customer focus SET Strategy, Execution, Talent ValuesIntegrity, Accountability, Teamwork, Innovation, Inclusion MOTIVATION/CULTURE FIT: Passion for technology Quick learner Innovative in thinking Team player Competencies Managing and Measuring Work Motivating Others Building Effective Teams SET Strategy, Execution, Talent (for managers) ABOUT TE CONNECTIVITY TE Connectivity plc (NYSETEL) is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 9,000 engineers, working alongside customers in approximately 130 countries, TE ensures that EVERY CONNECTION COUNTS. Learn more at www.te.com and on LinkedIn , Facebook , WeChat, Instagram and X (formerly Twitter). WHAT TE CONNECTIVITY OFFERS: We are pleased to offer you an exciting total package that can also be flexibly adapted to changing life situations - the well-being of our employees is our top priority! Competitive Salary Package Performance-Based Bonus Plans Health and Wellness Incentives Employee Stock Purchase Program Community Outreach Programs / Charity Events Across our global sites and business units, we put together packages of benefits that are either supported by TE itself or provided by external service providers. In principle, the benefits offered can vary from site to site. Location