• Lab, Validation of instruments, Raw materials and finished products Testing, Basic knowledge of IMS/IATF & SAP Will be preferred. • Knowledge of PPAP, SPC, FMEA, customer audits, supplier audits and fulfilment of CSR. Required Candidate profile • Complete documentation to maintain NABL scope accreditation, • Lead the audit and resolution of NCs for timely completion of internal audits for NABL certifications.

Senior Mechanical Design Engineer About the Role Design, build, and test electromechanical components. Support the full lifecycle of mechanical and electro-mechanical systems from concept to productization, including conceptualization, design, CAD modelling, development, and testing/validation. Use CAD, Creo, Solid work software to develop basic 3D models and drawings. Design components using various materials such as metals, ceramics, quartz, plastics, and advanced coatings. Ensure documentation adheres to SEMI standards and industry best practices for geometric dimensioning and tolerancing (GD&T). Conduct detailed analyses, including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to accurately specify designs. Develop and conduct feasibility studies and test plans to characterize and validate design performance. Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation during design reviews. Collaborate with suppliers and internal teams to ensure solutions are manufactured with high quality, cost-effectiveness, and compliance with requirements. Deliver key documents, including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations. Provide technical guidance and mentorship to junior engineers. Leadership and Training Responsibilities Lead the technical team in mechanical design projects, ensuring efficient workflow and adherence to timelines. Train and develop junior engineers to enhance their skills in design, analysis, and industry best practices. Organize workshops or training sessions to promote continuous learning within the team. Encourage innovation and foster collaboration within the engineering team to achieve project goals. Serve as a point of escalation for technical challenges, providing solutions and strategies to overcome obstacles. Show more Show less

Gathering industrial requirements and collaborating with engineering during product specification and design phases. Designing macro-processes based on standard SMP and preparing for the introduction of new technologies. Conducting Process FMEA, line balancing, and ergonomic workstation design to optimize workflow. Developing and validating industrial documentation, including industrial data sheets and Industrial Maturity Follow-Up (IMFU). Overseeing the industrialization of retrofits and supporting production in achieving QCD targets. Providing expertise during tender phases and actively participating in R&D programs as an industrial representative. Engineering or master's degree in manufacturing, mechanical, electrical, or supply chain disciplines. 5 to 10 years of experience in manufacturing or manufacturing engineering. Technical expertise in process engineering, writing work instructions, line balancing, and Lean manufacturing principles. Experience working with ERP systems (e.g., SAP) for Bill of Materials, Routings, and Configuration follow-up. Knowledge of Quality, EHS standards, ergonomics, and tools like CAD and PLM (e.g., CATIA, DELMIA). Proficiency in Process FMEA and QRQC methodologies. Strong communication skills in English, both written and spoken.

Job Purpose (Significance Of The Role & Objectives) To ensure that every vehicle and battery produced meets stringent quality and safety standards by inspecting materials, monitoring production processes, validating final products, and ensuring regulatory compliance. The role also involves identifying andanalysingg defects and working collaboratively across departments to resolve quality issues. Key Objectives Reduce defect detection time by 20% over the next 6 months. Achieve a 98% First Pass Yield (FPY) in the assembly line. Key Responsibilities And Deliverables Inspect incoming materials to ensure they meet required specifications. Conduct in-process inspections to detect defects early during manufacturing. Perform final inspections on vehicles/batteries to verify quality and safety compliance. Document inspection results, non-conformities, and corrective actions taken. Prepare and submit quality reports to management. Ensure compliance with industry standards and regulatory requirements. Support tasks assigned by the Reporting Manager. Coordinate with internal teams for project and departmental activities. Maintain and implement documentation for assigned quality-related projects. Collaborate with QA, SCM, NPI, Design, Engineering, and Production teams. Contribute to reducing defect detection time by 20% in the next 6 months. Aim to achieve 98% First Pass Yield (FPY) in the assembly line. Collaborate with: QA, SCM, NPI, Design, Engineering and Production team. Desired Qualifications: Required Qualifications, Knowledge, and Experience Strong understanding of quality standards (ISO 9001, IATF 16949, etc.) Knowledge of battery components, manufacturing processes, and common defects Proficient in using quality tools such as 7QC tools, 8D, RCA, FMEA, and SPC Familiarity with inspection instruments and equipment (e.g., vernier calipers, micrometres, multimeters) Knowledge of safety and compliance requirements related to EV/battery systems Ability to read and interpret engineering drawings and technical specifications Understanding of production workflows and in-process quality control methods Key Competencies Behavioural: Result-oriented, goal-driven, with a strong sense of ownership High integrity and professionalism Strong communication and interpersonal skills Self-motivated, proactive, and adaptable Team player with a solution-focused mindset Technical: Visual & electrical inspection, torque tool handling Use of quality instruments and sampling plans Understanding of GD&T, welding symbols, color matching, surface finish Reading 2D/3D engineering drawings Supplier quality evaluation Show more Show less

Project Role : Software Development Engineer Project Role Description : Analyze, design, code and test multiple components of application code across one or more clients. Perform maintenance, enhancements and/or development work. Must have skills : Automotive Functional Safety Good to have skills : NA Minimum 7.5 Year(s) Of Experience Is Required Educational Qualification : 15 years full time education Summary: As a Functional Safety Engineer, you would work closely with the development teams (systems, hardware, embedded software, integration) to deliver successful results through robust, consistent process which is compliant with ISO 26262. Roles and Responsibilities: 1. Audits processes and technically assessing safety related product. 2. Works autonomously across various projects. 3. Develops and delivers training at various levels in functional safety. 4. Takes responsibility for the functional and technical safety concepts. 5. Executes specific safety analyses (including HARA, FMEA, DFA, FTA, ..). 6. Develops functional safety plans, and safety case arguments/evidence. 7. Supports business development activities. Professional & Technical Skills: 1. 7+ years’ knowledge of systems engineering, embedded software (firmware development) and hardware electronics development, for safety related systems. 2. 5+ years’ experience of applying functional safety to automotive systems, preferably in the position of safety manager or coordinating a small team. 3. Knowledge in ISO 26262 is a must and knowledge in ISO PAS 21448, ISO SAE 21434, and ASPICE is a strong advantage. 4. Experience with specialist development and safety analysis tools such Polarion or DOORS, Enterprise Architect or Rhapsody and similar tools. 5. Have well-developed analytical skills, a person who is rigorous but pragmatic, being able to justify decisions with solid rationale Additional Information: 1. The candidate should have a minimum of 7 years of experience in firmware development. 2. This position is based at our Hyderabad office. 3. A 15 years full time education is required (Bachelor of Engineering in Electronics, or any related stream) Show more Show less

REQUIRED TECHNICAL EXPERTISE: Understanding of Model Based System Engineering (MBSE), Model Based Development, Requirement Modeling, System Architecture (SysML), Software Architecture, AUTOSAR Architecture, FMEA, Cybersecurity & Functional Safety etc.· Experience in developing models in Sy stem, Software architecture using SysML and UML tools· Should be able to decompose and implement/author AUOSAR Architecture· Good understanding of Requirement Implementation in SYSML tools· Experience in AUTOSAR ASW, BSW development and generate RTE with Vector, dSpace etc.· Ability to consult and setup MBSE process for customer· Understanding of the End-To-End traceability within MB SE· Understanding of Source Control software like SVN, Git and process management software like JIRA etc.· System analysis using tools and support of model-based approach for system analysis.· Analysis of customer requirements, standards, supplier documents and legal requirements in collaboration with involved domains including capturing of requirements.· Good understanding of Product Development cycle and processes· Understanding of V model approach in product development· Awareness of ASPICE, INCOSE guideline s, Quality Assurance, Functional Safety and Cybersecurity standards etc.· Awareness of Verification and Validation processes i.e. SIL, MIL, HIL testing· Awareness of FMEA processes and terminology Tools : Experienced in any below listed tools is necessary· System Modelling – Rhapsody, CATIA No Magic (Cameo), Enterprise Architect (EA), Windchill Modeler, MATLAB Simulink, MATLAB Stateflow etc. Show more Show less

We are hiring Assistant Manager-Process Engineering for our client a specialized Active Pharmaceutical Ingredients (APIs) manufacturing, marketing, and service organization. Designation : Assistant Manager – Process Engineering Location : R&D Jigani (Requires travel among our cross functional units) JOB DESCRIPTION: · Perform and lead risk assessment exercises in support of Active Pharmaceutical Ingredients process scale up & validation activities. · Collaborate with R&D to ensure successful API product development and technical transfer to Manufacturing. · Coordinate Scale up & validation activities including, but not limited to, protocol training, execution by validation and other departments, data collection, deviation resolution, and CAPA initiation, in support of assigned validation projects. · Maintain knowledge and comprehensive understanding of peptide regulations and current interpretations affecting equipment, product, and process. · Scale up & Validation representative on site project team and resource to other departments for API product and process knowledge. · Develop specialized technology/unit operations knowledge and provide training to operations as content expert for manufacturing standard operating procedures (SOPs). · Perform troubleshooting and investigation on unexpected issues. Own equipment-related deviations, CAPAs, and changes. Lead or participate in investigations, problem-solving activities such as root cause analysis, FMEA, problem analysis, and in development/implementation of countermeasure for quality, safety, environmental events. · Provide process technical expertise for requirements, design, selection, installation, qualification, operation, maintenance, and reliability of process equipment and facilities. · Perform and summarize improvement opportunities in technical reports, investigations, plant/lab trials, data analysis, and process modeling. · Active participation and engagement in the meetings and activities of the assigned process team and safety/environmental sub-teams. Ensure process complies with current industry regulatory expectations, new regulations, and corporate policies and programs for Quality, Health and Safety & Environmental, Process Safety. Qualifications: B.Tech – Chemical Engineering Experience – Minimum 4-6 years of relevant experience in API products. Experiences in API Process Development & Scale up/ Process validation Additional Skills/Preferences: · Strong written and oral communication skills · Strong leadership and organizational skills · Knowledge in managing multiple project objectives or assignments · Technical Writing Immediate Recruitment.Please send your profile to hrdgradus@gmail.com or whatapp profile to 9886775176 Show more Show less

Mandatory skills -Relevant work experience: 8+ years Hands-on experience in Allegro/AltiumVery strong high speed and multilayer layout skills including multi layer stack up design, differential pair, impedance control, matched delay, etc Sound knowledge of electrical electronic components Surface Mount through Hole Very good knowledge of IPC Standards like IPC2221A, IPC-SM-782 and IPC 7351, UL and MIL standards experience in creation and validation of footprints, PCB library management and performs layout design Good knowledge of PCB design guidelines for EMI EMC aspects, some exposure on hardware testing

PTRC- PERFICIO TESTING AND RESEARCH CENTRE is looking for Quality Manager to join our dynamic team and embark on a rewarding career journey Develop and implement quality management systems and processes. Conduct quality audits and inspections. Monitor and analyze quality performance metrics. Collaborate with cross-functional teams to address quality issues. Provide training and support on quality standards and procedures. Ensure compliance with regulatory and quality standards. Stay updated with industry trends and best practices in quality management. Leadership Skills Retail Knowledge Communication Skills Problem-Solving Abilities

Roles & Responsibilities: Design & Engineering Development – Conceptualizing and executing detailed engineering designs. Machine Layout Preparation – Designing layouts incorporating feedback elements and actuators, including pneumatics, electrical, and hydraulics. Detailed Engineering & Standards Compliance – Creating precise engineering documentation while ensuring adherence to ISO, IS, and EN design standards. Strategic Planning & Design Review – Participating in departmental planning sessions and conducting design reviews. Team Collaboration & Project Execution – Working collaboratively to develop designs in alignment with project schedules. Technical Expertise – Applying knowledge in electrical, pneumatics, and hydraulics for comprehensive design solutions. Documentation Management – Preparing and maintaining essential engineering documentation. Safety & Risk Assessment – Ensuring safety in design and demonstrating proficiency in risk assessment methodologies such as FMEA and RCA. Design Software Proficiency – Utilizing industry-standard design tools, including SolidWorks and Autodesk Inventor. Candidate Profile: Diploma or Bachelor of Engineering in Mechanical Mechanical engineer with machine building experience [Machine tool design, SPM, Material handling, conveying equipment, Packaging m/c building]. Experience in in-plant automation equipment building is desired. Requires a thorough understand of technical, regulatory, and commercial issues as well as pure design considerations. Proficient with the engineering calculations of the stress and strains of mechanical members based on various load conditions. Cycle time calculations, Motor Power calculations, creative; good oral and written skills in English Hands on work experience in 3D modelling and designing in Solid Work, and Auto-CAD [2D and 3D] drafting, prefer experience in Automation industries, who are supplying to automobile sector, Packaging Industry. Show more Show less

Description As a global leader in precision measurement sensing technologies, VPG addresses an expanding array of applications in which accuracy, reliability, and repeatability make the difference. Whether in the design and safety of new generations of cars, trucks, and planes or optimizing advanced medical equipment and consumer products, VPG’s deep engineering expertise makes the world safer, smarter, and more productive. We are seeking a highly motivated Senior Engineer to join our Production team on a full-time basis: Position Description Will be the Process owner for Documentation / SOP and partial production Major Responsibilities & Accountabilities Work out budget requirements in terms of manpower based on annual production targets and targeted efficiency To finalize the production volumes based on the Budget quantities month wise in coordination with the Planning, after assessment of the demand and constraints. Drill down the monthly plan to weekly plan for manufacturing and provide weekly requirements to Assembly. Monitor production performance on a daily, weekly and monthly basis and continuously review the achievement status of the KPIs. Meet the quantity targets; Meet service levels and targeted quality. Manage queue days as per the established norms; Analyze reasons for performance / non-performance and make corrective action plan. Deploy 5 S activities; ensure training and adherence to 5 S procedures. Monitor and audit 5 S practices; Take action to improve implementation at shop floor. Full House Keeping Audit Critical Skills & Attributes Technical Competencies Latest cutting tools technology CNC Programming IATF core tool Knowledge FMEA Control copy preparation APQP ( PFMEA , MSA , SPC and PPAP ) Essential Competencies Written communication Skill IATF Procedure Knowledge SOP Preparation Lean Manufacturing TPM OEE Good to have Competencies Design of Jigs and Fixture ISO Knowledge Quality Standard Soft Skills Decision making skill Problem solving skill Effective Communication Skill Strategic Thinking Flexibility Ability to delegate. Conflict resolution skill Requirements Academic/Professional Education: BE / B.Tech Mechanical Relevant Experience Min. 6 to 8 years in relevant field in any Manufacturing Industry. Preferably Mechanical field. Good knowledge in all CNC / VMC / HMC machines. Good man managing skills. Good Document and SOP preparation skills Benefits Best In Industry  Show more Show less

Quality Control Engineer (Mech) - Manufacturing Join a diverse and inclusive work culture Our differences make us unique and stronger. Every day, you will work with colleagues from different cultures. You will be challenged to see things in a new way and you will experience why differences are a strength. We actively support diversity and inclusion. And we work for equality, ensuring we all have an equal opportunity to make the most of our talents. Department You will be part of Manufacturing Operation-India, Global Supply Chain, Cement who supports Capital and Service for Materials, Warehouse & Logistics. By joining this team, you will have the chance to work in an international environment involving different cultures and different challenges. This department works closely with both our internal and external customers to ensure FLSmidth equipment’s on time delivery and customer satisfaction. You will be located in the Arakkonam plant. Role The Quality Control Engineer role at Arakkonam ensures quality control processes and inspections are done according to best practices. Your Responsibilities: Perform inspections and tests on raw materials, in-process components, and finished products to verify conformance to quality standards. Monitor production processes and identify potential quality issues early in the manufacturing cycle. Conduct dimensional checks, mechanical tests, and other relevant evaluations to ensure product quality. Investigate product defects and process deviations, identifying root causes and recommending corrective actions. Collaborate with production and engineering teams to resolve quality-related issues effectively. Ensure adherence to quality standards, including ISO, ASTM, and other relevant certifications. Stay updated on regulatory requirements and ensure products meet all compliance standards. Work with suppliers to address quality concerns and improve material reliability. Investigate non-conformities, perform root cause analysis, and implement corrective and preventive actions (CAPA). Key Accountabilities Reviews and approves processes for inspection of inbound material to ensure that quality standards are met. Inspect and approve incoming materials from suppliers, ensuring they meet specified requirements. Maintain detailed records of quality inspections, test results, and non-conformance reports. Prepare quality control reports and present findings to supervisors and stakeholders. Promotes a culture of personal and team safety, including others who may be affected by the company’s operational activities. What You Bring Certification in quality management systems (e.g., ASQ CQE, Six Sigma Green/Black Belt) is preferred. Hands-on experience with quality software and ERP systems. Prior experience in cement equipment manufacturing is a significant plus. Strong knowledge of QAP, IP quality control processes, tools, and methodologies. Proficiency in using measurement tools and testing equipment. Familiarity with manufacturing standards for heavy equipment (e.g., ASTM, DIN, ISO). Experience with statistical process control (SPC), failure mode and effects analysis (FMEA), and other quality tools. Excellent analytical, organizational, and communication skills. Education Qualification Bachelor’s degree or diploma in Mechanical, or Industrial Engineering, or a related field. Experience 5+ years of experience in quality engineering in a heavy manufacturing environment. What We Offer Competitive benefit package including Health Insurance, Personal Accident / Disability, Group Term Life Insurance, Annual health check-up, and voluntary insurance options. Time to recharge through 30 days PTO (with up to 10 days carry forward as Earned Leave stock) Work-life balance with a flexible work schedule so you can focus on professional and personal priorities. Employee Assistance Program An equal opportunity employer committed to creating a diverse and inclusive workplace. A global network of supportive colleagues and growth opportunities As an equal opportunity employer, FLSmidth embraces diversity and equality by promoting an environment of inclusion. FLSmidth Cement is a technology and service supplier with a passion to help our customers produce cement efficiently. After 140+ years of pioneering new innovations, we are uniquely positioned to be at the forefront of our industry’s green transition. For further information on FLSmidth Cement business and services, visit www.flsmidth.com or www.flsmidth-cement.com. Show more Show less

URGENT OPENING Currently We required Manager - regulatory Affairs for Medical Device company. JD-Manager- Regulatory Affairs Plant office - Medical devices 52-54,63&64, Roz ka meo , Industrial Area, Nuh , District. Mewat ( Haryana), India Company will provide you the cab facility from Fix point of Gurugram & Faridabad Working Daya - 6 days in a week The candidate Profile and the job description is as follows - · The Company has state of art manufacturing facility and its own R & D facility with 10,000 and 1,00,000 Class room specifications with continuous innovations and thereby offering customized products as per the requirements of various markets in India and abroad. · The Company is accredited with the following standards – a) ISO 9001 : 2008 b) ISO 13485 : 2003 ( EN) c) Directive 93/42/EEC (CE) d) Registration certificate with Dept of Health & Human Services, USA e) GMP Certificate as per schedule M. f) DGQA registered · The Company is having strong presence in almost all the Corporate Hospitals across India besides Trade, Military, Para-Military forces and in prestigious Government institutions. · The Company markets under its own brand name in International markets like UAE, Oman, Sri Lanka, Nepal and Bangladesh and besides being an OEM supplier to various MNCs for the entire Europe, Australia, New Zealand, South Africa etc. · Company’s product range includes various types of high quality gauze and bandage products besides some unique products in the Advance Wound Care segment which are being exported to major companies in Europe as well as to Australia, New Zealand, Middle & Far East and South Africa. Key responsibilities: Spearheaded regulatory submission strategy for CE marking under EU MDR for Class IIa, IIb & III devices. Authored and maintained FDA 510 (K) submission, including predicate device comparison and labeling review. Developed and maintained Technical Files and Design Dossier for European markets. Coordinated Clinical Evaluation Reports (CER) and Periodic Safety Update Reports (PSUR). Acted as point-of-contact for notified bodies and regulatory authorities during audits and inspections. Implemented and maintained ISO 13485:2016-Compliant QMS, prepared company for successful MDSAP audit. Developed and maintained company-wide QMS in compliance with ISO 13485:2016 AND 21 CFR 820. Conducted risk management activities as per ISO 14971:2019 and ISO/TR 24971:2020, including, AFAP, FMEA and Hazard Analysis. Led PMS activity (Plan, Report and arrange the feedback, sales data and other regulatory requirements from Marketing team). Prepare documents related to the Post Market Surveillance, General Safety and Performance Requirement (GSPR) Risk Management process of Class III medical devices as per MDR 2017. Plz Mention your Current CTC - Expected CTC - Notice period- Date of Birth- And ready for relocate - Regards, Khushi Asthana HR Manager Pratham Search Job Types: Full-time, Permanent Pay: ₹70,000.00 - ₹100,000.00 per month Benefits: Cell phone reimbursement Food provided Health insurance Provident Fund Work Location: In person

About the Company: Olympus Corporation is a globally renowned leader in endoscopy enabled healthcare, pioneering innovative solutions that enhance people's lives every day. With a rich history spanning nearly a century, Olympus has continuously pushed the boundaries of what's possible in the realms of medical, scientific, and imaging technology. Since its inception, Olympus has remained committed to its founding principles of integrity, innovation, and quality. Over the years, the company has diversified its portfolio, excelling in various fields including endoscopy, microscopy, life sciences, and digital imaging. Purpose of the Role: The Staff Electrical Engineer will focus on the technical execution of electrical engineering projects within Olympus. Reporting to the Associate Director, this role emphasizes technical leadership while maintaining some project management responsibilities. The individual will collaborate closely with Global R&D and India leads to drive the design, development, and troubleshooting of electrical systems for medical devices. This position will take charge of strategic technical oversight, particularly in vendor partner management, ensuring high-quality engineering outcomes and adherence to regulatory standards such as FDA Design Controls. While contributing to project planning and delivery, the focus will be on leading technical initiatives, ensuring alignment with the broader R&D strategy and offshore operational goals. The role requires proactive liaison with internal teams and external teams to maintain seamless coordination and ensure the timely achievement of project milestones. Key Responsibilities: NPD and Stakeholder Management: Lead hands-on development and execution of electrical designs, driving the implementation of complex electrical systems from concept through to production. Focus on achieving performance, reliability, and regulatory compliance in every phase Oversee the design and development of electrical systems, including circuit design, PCB layout, power management, and signal processing for medical devices Ensure designs are optimized for safety, reliability, manufacturability, and compliance with medical device standards Manage the selection and integration of components, sensors, and electronic systems that meet design requirements and regulatory standards Perform detailed design reviews with internal teams and vendor partner, offering technical expertise to refine electrical architectures and ensuring they meet all Olympus R&D objectives Implement advanced electrical engineering techniques, such as circuit simulation, power analysis, thermal modeling, and PCB design optimization, to drive high performance and reliability Collaborate with cross-functional teams (mechanical, software, systems engineers) to ensure seamless integration of electrical designs into overall product architecture and meet system-level requirements Provide technical mentorship to junior engineers and vendor partner, ensuring that best practices are followed and that technical decisions are aligned with Olympus’ long-term innovation strategies Ensure seamless communication of technical updates between stakeholders, including Olympus global teams, regulatory bodies, and vendor partner, focusing on detailed design compliance and technical specifications Develop and validate test protocols for electrical systems, ensuring designs are robust, reliable, and scalable while adhering to safety and regulatory standards Drive innovation in electrical design, implementing new technologies to improve the functionality, performance, and reliability of medical devices Identify and implement process improvements for electrical engineering design, testing, and validation to optimize product development Project Management: Lead technical tracking of project progress, developing detailed Gantt charts and project plans that map out technical milestones, dependencies, and resource needs for electrical R&D activities Coordinate with the PMO teams to ensure technical objectives are aligned with project timelines, adjusting designs and technical approaches to mitigate risks or delays Create and manage technical resource plans, ensuring that internal engineering teams and vendor partner have the tools, talent, and resources required to meet demanding project timelines Proactively troubleshoot and resolve technical challenges, leveraging advanced engineering methodologies like root cause analysis (RCA), failure mode effect analysis (FMEA), and reliability testing to resolve bottlenecks Support RAID management by identifying and documenting key technical risks, ensuring that each risk has an associated mitigation plan grounded in strong engineering fundamentals Provide in-depth technical reports to the PMO on project progress, focusing on design validation, testing outcomes, technical issues encountered, and proposed engineering solutions Oversee technical escalations, ensuring that all technical roadblocks are swiftly identified and addressed, with proposed solutions backed by solid technical rationale Practice Development: Lead technical setup of engineering tools and workflows, including implementing software for electrical design (e.g., Altium, MATLAB, SPICE), lab setups, and testing protocols for streamlined development within the function Develop and oversee technical processes, including change control, design reviews, and prototype testing, ensuring the function operates with cutting-edge engineering efficiency Establish advanced testing and validation protocols, ensuring that all electrical systems developed in the function meet high standards for performance, durability, and compliance Direct hands-on prototyping and debugging, focusing on early-stage system validation, component selection, and electrical design tuning to meet evolving project needs Drive continuous improvement initiatives to optimize technical workflows, reduce design cycles, and improve overall engineering output quality by integrating feedback from testing and real-world results Ensure all electrical designs meet global regulatory and safety standards, working closely with regulatory bodies and certification teams to ensure the function’s output aligns with industry regulations Manage technical knowledge-sharing sessions within the function, facilitating the exchange of engineering know-how between internal teams and external vendor partner to elevate the overall technical skill set Regulatory & Compliance: Support the Associate Director in ensuring product development aligns with regulatory and industry standards, including FDA, CE, ISO, and other relevant certifications Assist in engaging with external teams and certification bodies to ensure compliance with applicable safety standards Help maintain documentation in accordance with Good Manufacturing Practices (GMP) and quality system regulations Risk Management & Problem-Solving: Work with the team to identify technical risks and support the development of mitigation strategies Provide input and technical support to address engineering challenges throughout the product development process Person Specification: Education A degree or higher qualification in Biomedical / Electrical Engineering from a recognized university. Master’s in biomedical /electrical engineering will be an added advantage. Experience 10+ years of experience in electrical engineering R&D in the medical devices domain, with a mix of technical and managerial responsibilities Proven experience in collaborating with PMOs and global teams on electrical projects Strong technical background in electrical design, circuit board development, and compliance with regulatory standards Experience in medical device development is preferred Skills Strong technical expertise in electrical engineering, electronics, and mechatronics, with hands-on experience in R&D and/or sustaining engineering, especially in product development environments Proficient in circuit design, PCB layout, power management, analog and digital signal processing, and microcontroller-based systems Experience with electromagnetic compatibility (EMC) testing, electrical safety, and risk management practices Experience working with vendor partner on R&D projects, assisting in performance tracking, SLA monitoring, and supporting demand planning to ensure alignment with project requirements Familiarity with medical device product lifecycle management, with experience in applying FDA Design Controls and international standards (e.g., 820-CFR, ISO14971, IEC60601), ensuring compliance with project-specific regulations Comfortable working in Agile SCRUM and stage-gate environments, ensuring collaboration with cross-functional teams to meet project objectives Ability to develop and contribute to design documentation, including schematics, specifications, and compliance records for manufacturability and quality assurance Technical proficiency in PCB design tools (Altium/OrCAD), with the ability to review and provide feedback on schematics, component selection, and PCB manufacturing outputs Understanding of electromagnetic compatibility (EMC) challenges in electrical designs, contributing to design solutions to mitigate risks Knowledge of manufacturing processes for electrical components and an ability to assist in resolving complex technical issues with a practical approach Experience with requirements management systems (e.g., DOORS, JAMA), contributing to risk analysis and DFMEA processes in electrical R&D projects Effective stakeholder management skills, collaborating with PMO teams to ensure technical alignment and timely project delivery Strong communication skills, with the ability to present technical updates and information clearly to cross-functional teams and stakeholders Show more Show less

The employee administers safety and occupational health programs in compliance with standards and requirements and to assure safety, healthy, and efficient operations. The employee prepares technical guidance and direction for safety and occupational health program implementation. The employee performs audits and inspections of work sites, as required, to assure compliance with safety and health program requirements; prepares technical reports of inspection findings; and develops corrective actions. The employee independently inspects construction projects to determine compliance with applicable occupational safety standards (e.g., floor load capacity, aisle space, adequacy of sprinkling systems, safety features on storage tanks containing flammable and volatile liquids, and the adequacy of scaffolding erected to facilitate painting of buildings). The employee completes hazard and job safety analysis to ensure proper use of machinery and equipment, personal protective equipment, and procedures. The employee conducts accident investigations to ascertain causes and to develop preventive safety measures. The employee trains employees and lower-grade safety staff in specific program requirements. The employee participates in the facility Safety Committee, Accident Review Board, and/or Environment of Care (EOC) Committee. Performs other duties as assigned. Lead system safety analysis activities for assigned projects such as Electric Power Steering, Autonomous Steering, and Steer by Wire Perform Safety Analysis such as FTA, FMEDA, and FMEA Support the development of ISO 26262 compliant processes and work products. Specify safety strategies and requirements for system architecture, including safety concept, failure management and driver-warning strategies Support development of robust, fail-safe, or fault tolerant architectures and components to satisfy safety requirements Specify detailed safety requirements, including diagnostic and software requirements Specify and monitor specific safety tests, including fault injection testing Perform and document safety assessments, including safety case Stay abreast of new technology and applications to steering systems, ADAS, etc. Job Type: Full-time Pay: ₹23,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Health insurance Paid sick time Provident Fund Schedule: Day shift Supplemental Pay: Yearly bonus Ability to commute/relocate: Vikhroli, Mumbai, Maharashtra: Reliably commute or willing to relocate with an employer-provided relocation package (Required) Experience: Safety plans: 1 year (Required) total work: 1 year (Required) Language: Hindi (Required) English (Required) Marathi (Required) Location: Vikhroli, Mumbai, Maharashtra (Required) Willingness to travel: 75% (Required) Work Location: In person

We are seeking a highly motivated and experienced Condition Monitoring Engineer with 5-10 years of relevant experience to join our team in Bengaluru . In this critical role, you will be instrumental in enhancing the reliability and performance of our machinery within a complex oil and gas operating environment. You will drive best practices in equipment monitoring, troubleshooting, and maintenance strategy optimization. Key Responsibilities: Implement and optimize machinery performance and condition monitoring programs, ensuring alignment with industry best practices. Monitor and report on key performance indicators (KPIs) to assess the effectiveness of equipment, work processes, and data. Collaborate closely with cross-functional teams, including Operations, Technical, Maintenance, and Projects, to drive asset reliability improvements. Facilitate knowledge sharing by documenting and incorporating lessons learned into applicable systems. Provide expert troubleshooting support for equipment to enhance overall reliability. Lead and execute workflows across various aspects of equipment and condition monitoring, including: Condition Monitoring and Reporting for critical equipment. Analysis and decision-making based on Condition Monitoring results. Reliability Performance Monitoring and Reporting. Maintenance Strategy Optimization. Identification of opportunities and conducting studies for asset performance improvement (IMPACT Phase 1). Management of Threats and Deficiency Processes. Support Business Unit Deviation Management. Required Qualifications: Minimum 5-10 years of hands-on experience in machinery engineering and condition monitoring support, specifically within the oil and gas sector. Bachelor's degree (B.E./B.Tech.) in Mechanical Engineering , Reliability Engineering, or a closely related field from an accredited university. Postgraduate qualifications in Reliability Engineering, Condition Monitoring, RCM (Reliability-Centered Maintenance), or RAM (Reliability, Availability, and Maintainability Analysis) and Maintenance Strategy Development are highly preferred. Mandatory Skills: Proficiency in Condition Monitoring Techniques: Expertise in vibration analysis, thermography, oil analysis, and ultrasonic testing. Advanced Machinery Troubleshooting: Proven ability to diagnose and resolve complex machinery issues in an industrial environment. Reliability Engineering Principles: Strong understanding and application of concepts such as RCM, FMEA, RAM analysis, and Root Cause Analysis (RCA). Data Analysis & Reporting: Skilled in interpreting complex condition monitoring data, generating insightful reports, and tracking KPIs effectively. Maintenance Strategy Optimization: Ability to develop, implement, and optimize proactive maintenance strategies. Cross-functional Collaboration: Excellent interpersonal skills and the ability to work effectively with diverse teams (Operations, Technical, Maintenance). Domain Knowledge: Solid understanding of rotating and reciprocating machinery performance in a complex oil and gas operating environment. Software Proficiency: Experience with relevant Condition Monitoring software platforms and diagnostic tools.

Your Ideas, Our Future - Join us in enabling creative mobility solutions for a connected world. At Voltaira group , we don’t just build connectivity solutions for mobility — we empower people to create them. With our brands, Voltaira group and Autokabel , we have earned a global reputation for excellence, precision, and forward-thinking technology. Headquartered in Germany, we develop Sensor, Connectivity, and Electrification solutions that transform the way the world moves. Join our international team of 11,500 professionals across 50 locations in Europe, America, Asia, and North Africa. Step into a culture where inclusivity is the foundation, where your ideas are trusted and supported, where passions are nurtured, and where the spirit of collaboration is not only encouraged but where we shape the future together. We are looking for Process Quality Engineer at one of our locations in Asia India, ( Pune Lonikand) Your tasks: Take the next step in your career with us in a global innovative (automotive) environment: To evaluate nonconforming product and process, responsible for solve the production line of quality problems. Responsible for the early stage of the project quality to parts PPAP approval and prepare the relevant quality control documents in the process of production (Including responsible for drafting and update the work instruction and SOP）. Responsible for organizing the CFT, prepare the PPAP documents and submit the customer for approval. Summary of processing customer feedback, and train related staff, improve the quality awareness of site personnel. Respond to customer audit and review, and actively take relevant improvements. Ensure that all necessary systems and procedures are in place to satisfy all customer’s requirements Carry out monthly Quality related activities like layout, process & Product audit, SPC, MSA,4M etc Ensure all Quality policies, procedures, and work instructions are documented in a clear, simple, and concise manner. Compilation of all KPIs and reporting to the Quality Head on the performance of the quality Handle audits of customers, certifying agency Can use all kinds of measurement equipment skilled; know the shape tolerance, reading drawing well. Arrange production plan independently. Quality control and management experience, process quality control skill. Qualification:- Degree/ Diploma in engineer (Electronics/ Mechanical) Certified internal auditor for IATF16949 Deep knowledge of quality tools (APQP, FMEA, 8D, etc.) Detail knowledge of 8D, LPA, CSR, CQI as per AIAG Familiar with 8D-Problem Solving, IATF 16949 quality management system and five tool With strong communication skills and negotiation skills. Ensure 8D submit on time if any complaint came from customer Ensure to achieve KPI target for Process Quality Responsible for IQS-Realization / Escalations / Tracking of Targets 6-8 Years of Quality Experience in Wire Harness Field Our offer: Flexible Working Hours Individual Promotion Corporate benefits program with many attractive offers Globally operating Group of Companies. Flat hierarchies and short decision-making process. Independent and autonomous work. Are you interested? We are looking forward to receive your application. If you have any questions in the meantime do not hesitate to contact us. Please apply online in English and use our web portal at voltaira.recruitee.com. Voltaira group FIT Voltaira India Pvt. Ltd. | Gat no. 433, Shed no.1 & 2| Near Weikfield, Village Lonikand | Taluka Haveli | Pune-412216 | Maharashtra, India Contact person: Voltaira HR Team. Business Unit: One Mobility Voltaira

Areas of expertise - Mechanical design and Design experience in Tire Building Machines (preferable). Specific Knowledge - Engineering, Design calculations, various industrial components application, CAD model preparation, FEA and FMEA. Business understanding : Understanding of Tire Industrial developments, Market Growth in various tire segments and customer / industry demands. Areas Of Responsibility / Competency Mechanical design and handling projects at a time - Full level Interaction with Team members, knowledge sharing and team leadership - Full level Machine risk assessments and safety standards - Full level Knowledge in Manufacturing process and Purchase - Supporting level Machine inspection and customer interface - Full level Mechanical design and Design experience in Tire Building Machines (preferable). Show more Show less

Job Title : Deputy General Manager – Design & Engineering (BESS) Department : Engineering & Projects Location : [Insert Location] Reports To : General Manager – Design & Engineering / Head of Projects Job Purpose To lead the design and engineering activities of Battery Energy Storage Systems (BESS) projects from concept to commissioning. The DGM will be responsible for ensuring that all technical designs meet industry standards, project requirements, safety regulations, and company objectives. Key Responsibilities Design & Engineering Lead the design of utility-scale and C&I BESS solutions. Review and approve electrical, mechanical, and civil engineering designs including SLDs, layouts, schematics, control systems, and protection schemes. Ensure integration with renewable energy systems (e.g., solar, wind) and grid infrastructure. Optimize system performance based on use-case requirements (e.g., peak shaving, frequency regulation, arbitrage). Ensure compliance with IEC, IEEE, UL, and other relevant standards. Project Development Support Provide technical input during pre-bid and proposal stages. Evaluate project feasibility and conduct techno-commercial assessments. Support preparation of tender documents, RFQs, and technical specifications. Stakeholder Coordination Liaise with OEMs, EPC contractors, consultants, and internal stakeholders. Evaluate vendor proposals and lead technical negotiations. Collaborate with utility and regulatory bodies for grid interconnection and approvals. Quality & Safety Define design validation and verification procedures. Conduct design reviews and risk assessments (FMEA, HAZOP, etc.). Ensure designs meet HSE standards and project-specific safety norms. Team Leadership Guide and mentor a team of engineers across multiple disciplines. Promote knowledge-sharing and continuous improvement within the design team. Key Qualifications Education B.E./B.Tech in Electrical Engineering, Power Systems, or related field. M.E./M.Tech preferred. Certifications in battery systems, power electronics, or energy storage are an advantage. Experience 12–18 years of total experience with at least 5 years in BESS or energy storage-related projects. Proven experience in handling end-to-end design for BESS systems (100kW to 100+MW scale). Technical Competencies Strong knowledge of BESS technologies (Li-ion, LFP, flow batteries, etc.). Proficiency in engineering tools (AutoCAD, ETAP, PVSyst, PSCAD, MATLAB, etc.). Familiarity with grid codes, SCADA/BMS systems, and EMS integration. Understanding of hybrid systems, microgrids, and renewable integration. Behavioral Competencies Strong leadership and decision-making abilities. Excellent project management and multitasking skills. Effective communication and stakeholder engagement. Analytical and problem-solving mindset. Employment Type : Full-Time Travel : Moderate (project sites, client meetings, OEM facilities)

What You’ll Do If you desire to be part of something special, to be part of a winning team, to be part of a fun team – winning is fun. We are looking forward to hire Engineer - XIL in Pune, India. In Eaton, making our work exciting, engaging, meaningful; ensuring safety, health, wellness; and being a model of inclusion & diversity are already embedded in who we are - it’s in our values, part of our vision, and our clearly defined aspirational goals. This exciting role offers opportunity to: Responsible for implementing Test Automation using HiL, PiL & MiL across Electrical & Industrial segments with strong focus on system validation Automation and new product development with strong focus on, system test coverage, compliance & industry standards. Contibutes Technical expertice on test automation strategies and streamlining the development processes by coordinating with teams from Eaton India Innovation Centre (Pune) and various Divisions/facilities in North America, EMEA, APAC. Contribute to the test automation, Software/ communication protocols validations by ensuring quality and robustness of the products. Responsible for writing the test specifications, test scripts for requirement. Test Execution on HIL and analysis of Test results Will be responsible for analyzing test cases and modify them. Functional and Diagnostic HIL testing. Responsible for providing the logs, discussing Issues with team Provides resolution of issues and supports integration of work. Contributes towards continuous process improvements to support the Eaton Business System; DMAIC / DFSS. Qualifications BE - Electronics 3-6yrs , Test Automation Bachelor’s in Electronics /Automotive /Electrical engineering – with relevant model based development/ validation experience in Automotive domain Experience in setting up HIL test systems using National Instruments/ DSpace Hardware/ Software toolchains Experience in manual & automation testing for embedded controls products Experience in advanced embedded system validation toolchain like National Instruments/ DSpace Experience in HIL SW Toolchains – NI VeriStand/ LabVIEW, DSpace Experience working with CANape, CANalyzer, CANoe, ClearCase, ClearQuest development tools Strong Knowledge of scripting languages like Python, VBA, m-scripting Responsible for design of test procedures, automation scripts, software tools Execute tests, document test results and managing defect lifecycle Communication protocols- CAN/ J1939/ CCP/ XCP/Modbus Strong written, oral communication and interpersonal skills – experience working in International teams is highly recommended Strong technical experience in - communication Protocols. Experience in Requirement, architecture, design & Test script reviews and requirement based testing - Unit, Integration, System testing. Sound Knowledge and experience with process frameworks (e.g CMMI) including requirements management, defect tracking, build management, change management, and configuration management tools Experience collaborating with local / global suppliers for Hardware/Software procurement, building test lab setups etc. Hands on experience with Emulators and simulators. System and Software reviews, FMEA. Excellent communications skills. A high degree of aptitude, creativity is required. Skills Good interpersonal and communication skills ]]> Show more Show less

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Overview As a leading global aerospace company, Boeing develops, manufactures and services commercial airplanes, defense products and space systems for customers in more than 150 countries. As a top U.S. exporter, the company leverages the talents of a global supplier base to advance economic opportunity, sustainability and community impact. Boeing’s team is committed to innovating for the future, leading with sustainability, and cultivating a culture based on the company’s core values of safety, quality and integrity. Technology for today and tomorrow The Boeing India Engineering & Technology Center (BIETC) is a 5500+ engineering workforce that contributes to global aerospace growth. Our engineers deliver cutting-edge R&D, innovation, and high-quality engineering work in global markets, and leverage new-age technologies such as AI/ML, IIoT, Cloud, Model-Based Engineering, and Additive Manufacturing, shaping the future of aerospace. People-driven culture At Boeing, we believe creativity and innovation thrives when every employee is trusted, empowered, and has the flexibility to choose, grow, learn, and explore. We offer variable arrangements depending upon business and customer needs, and professional pursuits that offer greater flexibility in the way our people work. We also believe that collaboration, frequent team engagements, and face-to-face meetings bring together different perspectives and thoughts – enabling every voice to be heard and every perspective to be respected. No matter where or how our teammates work, we are committed to positively shaping people’s careers and being thoughtful about employee wellbeing. With us, you can create and contribute to what matters most in your career, community, country, and world. Join us in powering the progress of global aerospace. Position Overview: Boeing Test and Evaluation team is currently looking for one Associate Reliability Engineer to join their team in Bengaluru, KA. Test & Evaluation engineers at Boeing make sure that products at the world’s largest aerospace company continue to meet the highest standards. From quality and reliability to safety and performance, their expertise is vital to the concept, design and certifications of a wide variety of commercial and military systems. Boeing Test and Evaluation (BT&E) -India is an integral part of BT&E and is engaged in supporting lab and flight test for various programs. Position Responsibilities : Reliability Engineer will refine various existing reliability tools as well as create new tools/processes for automating existing work making it more efficient and reliable. Examples include reliability analysis, automation of reliability group assignments, uncertainty analysis tool development, and statistical analysis of assets to determine possible advance warnings for groups of assets that could have suspect reliability. This role will be driving the Reliability Management Board for calibrated inventory to review the reliability reassessment recommendations coming from various sources like analytical tools, reports from the ground, feedback from calibration technicians and so on. This position would apply expertise in statistics and reliability to the field of predictive and preventive maintenance through data analysis. The candidate will also be responsible to perform risk assessments such as FMEA, FTA, leveraging RCM principles for Boeing’s production system. The candidate would analyze maintenance data from CMMS to identify trends in production system performance, life cycle cost modelling. Use results to develop maintenance strategies to optimize uptime, reliability and achieve business goal. Influences use of mathematical tools and processes. Forecasts mathematical needs and capabilities to address business requirements. Designs, codes, tests and maintain mathematical software. This position will also be responsible for coordinating and communicating regularly with experts in Boeing organizations around the world. Employer will not sponsor applicants for employment visa status. Basic Qualifications (Required Skills/Experience): A Bachelor’s degree or higher is required. Experience in DfR methodologies, with a strong focus on statistical and reliability modelling. Experience in reliability analysis of failure data such as Weibull, Exponential, PoF, Monte Carlo simulation. Proficient in Lifecycle data analysis, Cost modelling, Availability / Maintainability Modeling, with strong Reliability Engineering fundamentals Experience and knowledge in reliability management of metrology and measurement systems ensuring high reliability and maintainability. Strong background in reliability engineering methodologies: RCM, FMEA, FTA, and RCA Experience with predictive maintenance and prognostic health management techniques such as RUL estimation, conditioning monitoring alerts (AI and machine learning experience is a plus) Proficient with Reliability & Statistical analysis tools like Minitab, Mathematica, JMP, Tableau, Reliasoft Hands-on coding in Python/R/Matlab would be an added advantage Knowledge of failure modes of mechanical, electromechanical and electronic components Awareness of AS9100 or ISO9001 quality management system and ISO 17025 standard ASQ CRE certification will be added advantage Preferred Qualifications (Desired Skills/Experience): Bachelor’s/ Master’s Degree Typical Education & Experience: Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of education and experience (e.g. Master+4 years' related work experience, 5+ years' related work experience, etc.). Relocation: This position does offer relocation based on candidate eligibility within INDIA. Applications for this position will be accepted until Jun. 13, 2025 Export Control Requirements: This is not an Export Control position. Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift Not a Shift Worker (India) Equal Opportunity Employer: We are an equal opportunity employer. We do not accept unlawful discrimination in our recruitment or employment practices on any grounds including but not limited to; race, color, ethnicity, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military and veteran status, or other characteristics covered by applicable law. We have teams in more than 65 countries, and each person plays a role in helping us become one of the world’s most innovative, diverse and inclusive companies. We are proud members of the Valuable 500 and welcome applications from candidates with disabilities. Applicants are encouraged to share with our recruitment team any accommodations required during the recruitment process. Accommodations may include but are not limited to: conducting interviews in accessible locations that accommodate mobility needs, encouraging candidates to bring and use any existing assistive technology such as screen readers and offering flexible interview formats such as virtual or phone interviews. Show more Show less

NVIDIA GPUs have ignited a new era of computing with the advent of AI, for which the GPU acts as the brain of computers. Robotics, self-driving cars, industrial automation, and many other domains benefit from the computing power of GPUs. The high-quality and robust GPU software stack simplifies the realization of complex use cases. This has been possible because of the amazing group of people working here at NVIDIA who made this happen. We are now looking for a Senior System Software Engineer in Compute System software team to work on the architecture and design of the user mode drivers that interact with GPU, DLA and other Tegra compute engines. What You’ll Be Doing You will be involved in the definition, architectural design and analysis, and development of groundbreaking functional safety software, with an opportunity to shape the future of parallel computation on GPUs Modify complex software designed for diverse domains and fortify it to meet the standards vital for deployment in critical automotive sectors, while also successfully acquiring safety certification. Participate in development of proprietary and open computing standards and contribute to the development of next generation GPUs in collaboration with architecture and HW engineers at NVIDIA Inculcate a culture of high quality software development in the team, mentor other engineers What We Need To See BS/MS degree in Computer Science or related field or equivalent experience Passionate about high quality software engineering, and a desire to contribute towards creating better software Fair understanding of computer architecture, OS fundamentals 5+ years of proven experience in complex software development, design, and analysis A strong teammate; self-motivated and good demeanor A strong desire to learn, grow and create Ways To Stand Out From The Crowd Previous experience with Parallel Programming, particularly in CUDA, OpenCL, or Renderscript Prior experience with developing safety critical software, or hardening and taking complex software through software audits Hands-on background with software safety analyses, such as FMEA, FTA, ETA, HAZOP, DFA/coexistence analysis/freedom from interference, etc Hands-on experience with various tools and standards for better software engineering at the architectural, design, and code levels NVIDIA is committed to cultivating a diverse work environment and proud to be an equal opportunity employer. As we highly value diversity in our current and future employees, we do not discriminate (including in our hiring and promotion practices) on the basis of race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other characteristic protected by law. JR1991381 Show more Show less

The Head of CC&QC will be responsible to oversee and drive excellence in clinical operations and quality care delivery. This role demands a strategic leader with a deep understanding of hospital-based clinical workflows, quality protocols, patient safety, and risk management. As the primary custodian of clinical monitoring, documentation compliance, and patient experience outcomes, you will play a critical role in ensuring that all aspects of patient care—from admission to discharge—adhere to the highest standards of clinical effectiveness, ethical practice, and regulatory compliance. Key responsibilities: Clinical Service Delivery Management: Outpatient Care Monitoring - Outpatient Care Cycle monitoring and compliance monitoring - Consultation, TAT monitoring, and compliance reporting Follow-up monitoring and compliance Randomised Cross-Referral Checking Adverse Event Monitoring and follow-up Inpatient Care Monitoring - Bedside Care Management - Admission - Review of Admission Ward Transfer Assessment and high-risk flagging Referral Monitoring, Assessment and Fulfilment Consultant Visit Monitoring and Fulfilment Counselling compliance and monitoring Admission Refusal Monitoring and Compliance Outcome Monitoring Adherence to plan of care - Addressing discrepancies when found. Documentation Compliance and Medication Administration Compliance Privileged bedside procedure monitoring and compliance (Life-saving in critical care setting + Non- Non-life-saving routine bedside procedures) Adverse event documentation and follow-up up i.e. code blue/red / violet Plan of care adherence report - Discrepancy Reporting Medication Error Reporting Summary - according to the designed reporting template Privileged Bed-Side and life-saving procedure compliance report - if any discrepancies are found to be reported and documented Adverse Event Reporting (Weekly Summary) Inpatient Documentation Compliance Report (Report of Discrepancies if found) Review of Bedside Care KPI’s Monthly Plan of Care Deviation Report Monthly Medication Error Summary Privileged Procedure adherence compliance Adverse Event Compilation, along with response summary and action taken Monthly Inpatient Documentation Compliance Variance Report Surgical & Interventional Care Monitoring - Protocol compliance and monitoring - Surgery and Procedure Workflow compliance Documentation compliance, i.e., Consents and necessary medico-legal documentation Addressing discrepancies when found and documenting the action taken. Adverse Event Documentation Clinical Support Service Delivery monitoring and compliance with quality parameters Diagnostics TAT monitoring (IP and OP) Diagnostics Orders compliance and fulfilment (IP) and action taken for discrepancies Infection control monitoring and compliance as per norms Bio-Medical Waste Management monitoring and compliance as per norms CSSD protocol compliance Clinical Human Resource Management - Clinical Care Service Delivery Manpower Planning Clinical Care Roster Management & Optimisation with concerned department heads. Lifecycle Management - Training, Privileging and Appraisal - Upgradation and Retrenchment planning. Workflow mapping for all clinical care-related employees Quality Control Protocols for important clinical care scenarios about clinical service delivery Critical Manpower Level Document Creation Key clinical care functionaries identification and roadmap planning Orientation document preparation for clinical care staff (Position-wise) Clinical Care Positions Recruitment Protocol - Requisition, Interview and Assessment, end user vetting and exit interview protocol. Privileging protocol and certification Primary Lead for Quality Areas Domain Management Quality Control (NABH, NABL) and clinical Audits Adherence to industry standard norms on clinical care quality protocols for infection control, bio-medical waste management. Periodic Meetings with Clinical Care service delivery stakeholders on important cases/issues on protocol/quality parameters shortcomings. Compliance monitoring of the clinical service delivery workflow as outlined in the above points. Abnormal Reporting monitoring, and follow-up action Random diagnostics report cross verification (for different modalities) Abnormal Reporting Documentation and follow-up action taken Sudden Adverse outcome documentation and follow up action LAMA / DOPR higher centre referral report Clinical Risk Management Timely identification, documentation, and escalation of clinical and operational risks Implementation and monitoring of risk mitigation strategies in coordination with relevant clinical and administrative stakeholders Development of a Clinical Risk Register and periodic review of high-risk cases, outcomes, and trends. Proactive participation in root cause analysis (RCA) and failure mode effects analysis (FMEA) for adverse events. Collaboration with Quality and Safety teams to ensure implementation of corrective and preventive actions. Patient Experience Management (PREMs) Introduction and implementation of Patient Reported Experience Measures (PREMs) tools across inpatient and outpatient settings. Systematic collection, analysis, and reporting of patient feedback using structured PREMs methodologies. Identification of actionable insights from patient experience data to inform service improvement. Regular coordination with clinical teams to enhance patient-centric care delivery based on PREM's outcomes. Monitoring PREMs trends and submitting periodic dashboards/reports to senior leadership. Qualifications: MBBS/BDS/BHMS/BAMS with a Master’s degree in Hospital Administration (MHA), Health Management, or Public Health (MPH) from a recognised institution Certification in NABH, NABL, or other healthcare quality standards preferred Additional training or certification in Risk Management, Patient Safety, or Clinical Governance is an advantage Experience: Minimum 5-7 years of experience in hospital operations or clinical administration, with at least 3 years in a quality or patient safety leadership role Proven experience in managing end-to-end inpatient and outpatient clinical workflows Hands-on involvement in hospital accreditation processes (e.g., NABH/NABL audits) Demonstrated experience in clinical quality monitoring, risk mitigation, and adverse event management Exposure to PREMs implementation or patient experience measurement tools is desirable Desired Skillsets: Strong understanding of clinical protocols, patient safety norms, and quality indicators Expertise in developing and implementing SOPs for clinical documentation, care pathways, and compliance standards Proficient in data analysis and report generation for clinical quality metrics, adverse events, and performance KPIs Excellent coordination skills with clinical, diagnostic, and administrative teams Ability to identify clinical risks proactively and implement effective mitigation strategies Strong interpersonal, communication, and leadership skills Competence in handling sensitive situations with ethical clarity and professional discretion Tech-savvy with working knowledge of hospital information systems (HIS), quality dashboards, and audit tools Show more Show less

What We Offer At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied responsibilities as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are. Group Summary Transforming mobility. Making automotive technology that is smarter, cleaner, safer and lighter. That’s what we’re passionate about at Magna Powertrain, and we do it by creating world-class powertrain systems. We are a premier supplier for the global automotive industry with full capabilities in design, development, testing and manufacturing of complex powertrain systems. Our name stands for quality, environmental consciousness, and safety. Innovation is what drives us and we drive innovation. Dream big and create the future of mobility at Magna Powertrain. Job Responsibilities Company Introduction: At Magna , we create technology that disrupts the industry and solves big problems for consumers, our customers, and the world around us. We’re the only mobility technology company and supplier with complete expertise across the entire vehicle. We are committed to quality and continuous improvement because our products impact millions of people every day. But we’re more than what we make. We are a group of entrepreneurial-minded people whose collective expertise gives us a competitive advantage. World Class Manufacturing is a journey and it’s our talented people who lead us on this journey. Job Introduction Mechanical System Engineer / Geometrical Integration (MSE/GI) MSE/GI is a critical technical role in product system engineering. The position is responsible for ensuring the geometrical integrity of mechanical systems throughout the product development lifecycle. This includes defining and managing mechanical interfaces, integrating subsystems, and aligning the overall system with customer requirements, production processes, and installation needs. Major Responsibilities Define and manage mechanical system requirements and specifications, with a focus on geometrical integration. Oversee the integration of subsystems into the overall system architecture, ensuring system compatibility and compliance with design requirements. Collaborate with internal teams (Subprojects, Building Blocks, Product Function Groups) and customers to manage mechanical interfaces and alignment. Develop and maintain essential system documentation, including Bill of Materials (BOM), assembly drawings, and customer installation drawings. Lead design reviews, risk assessments, and workshops to ensure the system design is manufacturable, assembly-friendly, and aligned with customer requirements. Manage the integration of subsystem BOMs into a unified system BOM. Develop and communicate interface drawings to customers, including tolerance stack-ups at the system level. Ensure the system meets critical design targets such as weight, centre of gravity (CoG), moments of inertia, and material specifications. Lead the definition of the serviceability concept in collaboration with After Sales teams. Participate in change management processes, evaluating mechanical system impacts of proposed changes. Support the alignment of subsystems with internal and external teams to ensure successful project execution. Knowledge And Education A bachelor’s degree in mechanical engineering, Industrial Engineering, or a related technical field is mandatory. A master’s degree in mechanical engineering, System Engineering, or a related discipline is highly advantageous. Work Experience At least 3-5 years of experience in mechanical system integration, product design, or similar engineering roles. Experience in geometrical integration and managing interfaces at a system level is required. Experience in the automotive, aerospace, or similar complex engineering fields is beneficial. Familiarity with designing and managing systems with a focus on manufacturability and customer-specific requirements. Skills And Competencies Strong knowledge of mechanical system design, integration, and geometrical alignment. Proficiency with CAD tools (e.g., CATIA, SolidWorks, AutoCAD) and experience in 3D modelling. Experience in managing and integrating Bill of Materials (BOM) at the system level. Solid understanding of mechanical interfaces, tolerance stack-ups, and system-level integration. Ability to balance competing design requirements such as weight, materials, and cost considerations. Excellent communication and collaboration skills for coordinating across cross-functional teams and with customers. Experience in conducting and leading design reviews, risk assessments, and change management processes. Knowledge of industry standards for mechanical systems and geometrical integration. Experience with FMEA (Failure Mode and Effects Analysis) and serviceability concepts. Strong problem-solving skills and ability to think analytically under pressure. Awareness, Unity, Empowerment At Magna, we believe that a diverse workforce is critical to our success. That’s why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email to comply with GDPR requirements and your local Data Privacy Law. Worker Type Regular / Permanent Group Magna Powertrain Show more Show less

Greetings from Synergy Resource Solutions (www.synergyresource.co.in) a leading HR Consultancy Firm. Our client company is global market leader in Maritime Industry. They have offices around the globe and into Maritime business for last 200 years. Company is an international, knowledge-based group that supplies high technology systems and solutions to customers in the oil and gas industry, the merchant marine, Digital and the defense and aerospace industries. Position: Project Engineer- ICSS Qualification: - B.E/ M.E. Electrical / Instrumentation Control Experience:- 2 to 8 Years of experience in Process Automation. Location:- Mahape, Navi Mumbai Department:- Projects Reports To: - HOD – Projects/ Group Manager Job Description:- Field commissioning experience from maritime, shipping and/or offshore oil & gas installations Experience with automation of vessel types LNGC, FSRU, FPSO & relevant DCS system Knowledge of PCS (Process Control System), VCS (Vessel control system), PMS (Power Management System), LNG related applications (Gas Management, Vapor Header Pressure Control, Fuel Gas Header Pressure Control, Compressor handling (LD, HD), Gas Heater Control, Mist Separator Control, Vaporizer Control, Pre-Cooler Control, Fuel Change Over Sequence, Vapor Header Over Pressure Control), LNG FGSS (Fuel Gas Supply System), F&G (Fire & Gas), PSD (Process Shutdown), ESD (Emergency Shutdown) Hands on experience in Profibus, Modbus RTU/TCP, OPC UA/DA Skills:- Excellent cooperative & good communication skills with excellent verbal and written English Positive attitude, cope with challenges and finding solutions, self-driven & focused. Go-ahead spirit and target oriented Travel:- Based on the Exigency of the Assignment /Project Roles & Responsibilities:- Responsible for engineering, commissioning, and service attendance of Integrated Control System • Responsible for Commissioning startup on shipyards & offshore locations worldwide Responsible for SW production of Process Control System (PCS), Vessel Control Systems (VCS), Safety (Fire & Gas, PSD, ESD), Power Management System (PMS), Propulsion Control System in accordance with design documentation and procedures, as allocated by nearest supervisor. Production of HMI in accordance with P&ID (Process & Instrument Diagram), and I/O database Responsible for project documentation, as allocated by nearest supervisor. Report progress of work on regular basis, to nearest supervisor and PM (Project Manager) Participate in project meetings, IAT (Internal Acceptance Test) and FAT (Factory Acceptance Test), installation, commissioning including, SAT (Site Acceptance Test), CAT (Customer Acceptance Test) and Sea Trials (FMEA support) Handle both local and overseas projects and administrative work. Assist sales department with technical issues and enquiries. • Undertake all aspects of project works and ad-hoc tasks assigned from time-to-time. Candidates having matching experience & qualification can share their updated resume with details of their present salary, expectations & notice period. Show more Show less