167 Field Instrumentation Jobs

Dalmia Cement Bharat Ltd is looking for Electrical & Instrumentation Inspector to join our dynamic team and embark on a rewarding career journey Quality Inspection: Conduct inspections and audits of products, materials, components, or systems to verify conformance with established quality standards, specifications, and requirements Regulatory Compliance: Ensure compliance with applicable laws, regulations, codes, and industry standards governing product safety, environmental protection, occupational health, and consumer protection Documentation Review: Review documentation, records, and technical specifications related to inspected items or processes to confirm accuracy, completeness, and adherence to documentation requirements Physical Examination: Perform visual inspections, measurements, tests, and examinations of physical attributes, dimensions, and properties of inspected items using specialized tools, equipment, and instruments Sampling and Testing: Collect samples, specimens, or test specimens from production batches, lots, or shipments for laboratory analysis, testing, or further evaluation as per sampling plans and testing protocols Defect Identification: Identify and document defects, non-conformities, deviations, or discrepancies observed during inspections Classify defects based on severity, impact, and risk factors to determine appropriate corrective actions Root Cause Analysis: Investigate root causes of quality issues, failures, or discrepancies detected during inspections Analyze data, trends, and patterns to identify underlying problems and recommend preventive measures Corrective Action: Recommend corrective actions, preventive measures, and quality improvement initiatives to address identified issues, prevent recurrence, and enhance overall quality performance

Technical competency in handling electronic, thermal, or optical instruments Willingness to travel regularly for fieldwork (up to 80 km daily)Good written and verbal communication skills. and capable of managing time and tasks independently. Provident fund Travel allowance

The successful candidate will be responsible for assisting their Senior Engineer- Instrumentation tasks/deliverables to support water, wastewater, desalination, and Biosolids treatment facilities such as. Evaluate and develop alternative control system solutions that meet client requirements. Develop design reports, specifications, plans, and associated client deliverables for the I&C and SCADA systems. Specify instruments, controllers, computers, servers, ancillary equipment and components, and application software. Assist in defining interface requirements for process valves, adjustable frequency drives, and packaged systems. Develop new and modify existing application programming in PLCs (programmable logic controllers), HMIs (human machine interfaces) and associated components. Participate in consulting, design, construction, planning, commissioning/start-up, training, and close-out phase activities. Create documentation for application software. Work with and Coordinate SCADA system requirements with other disciplines including civil, structural, architectural, process mechanical, HVAC, plumbing, and electrical during the design phase. Interact with clients to gain an understanding of their systems. Work with contractors, and sub-contractors to resolve issues during, construction and commissioning/start-up Providing mentoring and support for junior engineers and cad technicians. Contribute to the production and delivery of concise high-quality technical documentation in English. Qualifications B.E./M.Tech. (preferred) in Instrumentation & Control from a recognized university. Professional registration or licensure in their designated home office country or be inactive pursuit of such registration. Awareness of Quality aspects (i.e., registers, design issues logs, QC process, design transmittals, etc.). Able to independently work efficiently and meet required deadlines by following relevant design manuals/standards and practices 6+ Years of experience in the water/wastewater industry Good English communication skills. Good team player

Job Summary: If you are a Project Engineer professional and looking for career opportunity, Emerson has an exciting offer to you! Project Engineer will handle techno commercial proposals for field instrumentation. In this Role, Your Responsibilities Will Be: Develop Techno-commercial proposals for field instrumentation and manage complete execution of Project Orders for Rosemount business. Provide pre-sales and post-sales technical support for Rosemount products Select suitable instruments based on the RFQ and detail the specifications Design instrumentation solutions based on the applications Provide Support to Emerson Sales Offices for efficient and effective Project Execution Prepare post order documentation. The position will be responsible for cleaning the documents, resolving the customer comments and timely submission. Attend internal project execution meetings to understand customer requirements and act accordingly. Procuring buyouts and co-ordination with the vendors Responsibility of meeting the project schedule Maintain log of key metrics for projects and proposals Who You Are: You readily action new challenges, without unnecessary planning. You know your strengths, weaknesses, opportunities, and limits. You show personal commitment and take-action to continuously improve. You learn quickly when facing new situations. You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. For This Role, You Will Need : Experience upto 2- 4 years Minimum 2- 3 years in core instrumentation with Process Industry, EPC Companies or OEM companies. Clear understanding of basic working principles of Pressure, Temperature, DP Flow and Level meters, Radar Type Level meters, Flame and Gas monitoring Systems Familiarity with installation and calibration of instruments Familiarity with the Instrument Data Sheets and Specifications, International Standards for Hazardous, Flammable Areas, Ingress Protection Codes. Selection of suitable instrument types and models based on the customer specifications Ability to handle MS Office applications like Word, Excel and Power Point with ease. Familiarity with MS Projects will be an added advantage. Candidates with knowledge of documentation related to the post order activities will be preferred. Preferred Qualifications that Set You Apart: BE /B. Tech in Instrumentation Engineering from a reputed institute. Candidates with Post-Graduation (ME, M Tech) in Instrumentation Engineering may also apply. Our Culture Commitment to You . .

ETS System Engineer - TAS Job Summary If you are a TAS expert professional, Emerson has an exciting role for you! We are looking for a TAS System Engineer in Oil and Gas domain to work with our ETS Systems Team. This role will work independently and as a part of a team to design, implementation & engineer the Oil and Gas Projects for DeltaV etc. You will participate in project-wide reviews of requirements, system architecture, and detailed design documents, engineering, site surveys, FAT support, commissioning etc. We value autonomy, self-reliance, fast movers, a passion for robust and maintainable tests, and above all, the ability to ship a quality product. In This Role, Your Responsibilities Will Be: Design & documentation. Maintain the skill level of the whole engineering team. Contribute to the overall quality of the organization in the engineering space. Ensuring high performance on a variety of platforms. Creating standard protocols & documentation for repat use. Participation in Pre FAT, FAT, SAT etc Review Deliverables for Quality & Accuracy with Peers & Lead. Monitor Compliance to process/Targets Maintain QMS system for defects, rework & other indicators Maintaining Cost, quality & schedule as per contractual terms Who You Are: You promote high visibility of shared contributions to goals. You quickly and significantly take action in constantly evolving, unexpected situations. You actively seek input from pertinent sources to make timely and well-informed decisions. You handle the risk that comes with moving forward when the outcome is not certain. For This Role, You Will Need: Engineering degree & equivalent work experience 2 to 3 years of DeltaV configuration and testing experience - Terminal experience preferred Knowledge of DeltaV components (Database (IO, Alarms and Events, Namedset), SFC configuration, EQM configuration, Class and Instance Configuration, Graphics configuration VB script knowledge preferred Basic knowledge of SQL (queries, SP, functions) is preferrable Basic knowledge of reporting packages (Crystal Report, SSRS) is preferrable Must have outstanding ability to work with people at all levels and must be a team player Field Instrumentation knowledge for Flow meters, pressure & temperature transmitters, control valves etc. Preparation of Project Cycle Documents like Functional Design Documents, Control Narratives, Test Procedures etc. FAT and SAT experience of TAS with domestic and international clients Customer/vendor/Factory Liaison to fulfill documentation and inspection requirements. Coordinate Tests/Inspections of all bought out/fabricated items. Computer skills in Windows, Outlook, MS Word, Adobe Acrobat and Excel. Preferred Qualifications that Set You Apart: Degree in Instrumentation & Control / Electrical / Electronics Engineering Basic understanding of networking protocols and concepts Capable of describing and documenting for overall Project strategy Contribute to and help maintain the engineering team Excellent written and verbal communication skills Innovative mind set. Thrive for Results Being Organizationally Savvy Interpersonal Savvy Business Ethics & Integrity

Instrument Engineer Location: Sanand, Near Ahmedabad, Gujarat, India Experience: 810 Years Qualification: B.E. – Instrumentation Engineering Industry: Semiconductor / Process / Automation Role Summary: We are looking for an experienced Instrument Engineer to join our team at our Sanand facility near Ahmedabad. The ideal candidate should have a strong background in instrumentation and controls engineering , particularly in a semiconductor or OSAT (Outsourced Semiconductor Assembly and Test) production environment. Key Responsibilities: Lead and manage instrumentation and controls engineering activities across OSAT production processes. Develop, modify, and troubleshoot PLC and HMI programs to optimize production and system performance. Execute start-up, commissioning , and integration of equipment, processes, and facility controls. Collaborate with process, equipment, and facility teams to ensure effective automation and system reliability. Support root cause analysis and corrective actions related to instrumentation and control systems. Ensure compliance with engineering standards, safety regulations, and operational protocols. Candidate Profile: B.E. in Instrumentation Engineering 5–10 years of relevant experience in instrumentation and control systems Strong hands-on knowledge of PLC/HMI programming and troubleshooting Experience in start-up and commissioning of automated equipment and systems Exposure to process or automation industries is highly desirable Strong analytical, communication, and team coordination skills Preferred Skills: Experience with SCADA systems, sensors, transmitters, and industrial communication protocols Familiarity with ISO and safety standards related to equipment automation Ability to interpret technical drawings, P&IDs, and control schematics

ROLES & RESPONSIBILITIES: Basic & Detailed Engineering & Design of Instrumentation & Control Systems for EPC Projects in the field of Oil & Gas Sector (Offshore / Onshore), Petrochemicals, Hydrocarbon, Power Plants, Metals and Mining & Process Industries. Candidate should be able to understand P&ID, review Project Scope of Work and develop Instrumentation & Control systems related detailed engineering drawings and documents assisting Draftsman. Should have knowledge of Field Instruments, Transmitters & Gauges, Control Valves, On-Off Actuated Valves, PSV's, PLCs, DCS system, ESD Systems, F&G Systems, Fire & Gas Detectors and Devices, Preparation of MR/RFQ, TBE, Offer Evaluation, PR & Vendor Document Review (VDR). Should have knowledge of development of System Architecture, Instrument Index, Instrument Data sheets, Package Specifications, Cable Block Diagrams, Hook-up Drawings, Cable Route Layouts and Schedules, Logic Diagrams, Bill of Material, MTO etc.

Position :- Instrument Supervisor Experience :- 1-6 years in Chemical / Oil Gas/Fertilizer Company Qualification :- Diploma in Instrumentation /Electronics ( Full Time) Erection & Commissioning of Smart Field Instruments , awareness of Safety permit system, field IOs. Well-acquainted to P& ID ,Sizing sheet, Hook-up drawing , ISO standards , JSA ,PSSR ,HAZOP. Erection & Commissioning of DCS/PLC , Smart Field Instruments ( YOKOGAWA DCS Preferable) Hands-on experience of FF /TURCK RIO and Siemens IMCC Commissioning. Co-ordination with vendors & Contractors for AMC/ARC/Repairing job Hands-on experience of FF /TURCK RIO and Siemens IMCC Commissioning Well-acquainted to P& ID ,Sizing sheet, Hook-up drawing , ISO standards , JSA ,PSSR ,HAZOP.

Candidate will be working with various process industries like (Cement, Power, Chemical, Plastic, Pharma, Oil & Gas, Steel, Paper etc after getting trained on Automation tools on a self support basis. Required Candidate profile Fresher Degree / Diploma - Electrical / Electronics / Instrumentation / Mechatronics. Perks and benefits Best in Industry

"# Field Instruments Maintenance # DCS / Calibration

We are looking candidate for Technical Associate-Instrument based at Dahej (Gujrat). Position description: To ensure & optimize smooth operation of all instruments. Role & responsibilities Strategic: Carrying out in house & external calibration of instruments as per schedule for proper functioning. Operational: Carry out & maintain safety interlocks & controlling instruments in working Complete shutdown instrument maintenance within time limit. Carry out instrument preventive maintenance as per schedule. Check all received spares as per specification. Check log book & decide jobs on priority basis. Carry out shutdown, break down, & preventive maintenance as per schedule to reduce plant break down. Responsible for smooth operation of instruments. Taking plant round & check instrument & write observation in daily report book. Inspection & checking of gas detector system as per schedule. Responsible to indent & inspect material as per specification. Responsible to maintain daily log book. Responsible for monitoring of flammability & oxygen percentage in the work environment as per schedule. Authorized to check safety of the instrument, if not stop the job Authorized to change faulty instruments in consultation with Dy. Manager- Instrument. Implementation of operational controls as per requirement of the operation / activity Guide the operators in implementation of QESH & RC systems. Ensure to follow safety norms to achieve zero accidents Report any near miss /incident or any non-compliance To participate in Root Cause Analysis of Various safety and process safety incidents, Monitor and ensure implementation of CAPA ( Corrective Actions & Preventive Actions) To Support Various Process safety and Responsible Care Initiatives Report non-conformities and implementation of corrective actions Responsible to complete any other assignment given by the senior Required Knowledge (of any equipment / Tools and techniques / Software) Field instruments, DCS, PLC, & SCADA single loop, duel loop control system Education & Experience Education Essential: Diploma in Instrumentation / Electronics & Communication Experience Essential:3-5 yrs Competencies / Skills Job Knowledge Innovation Observation. Communication skills Listening Motivation Team work. Promptness. Knowledge of erection & commissioning. if you are interested & your profile is suitable please share your updated resume on siddhi.pathak@laxmi.com/9125652023

Job Summary: If you are a Project Engineer professional and looking for career opportunity, Emerson has an exciting offer to you! Project Engineer will handle techno commercial proposals for field instrumentation. In this Role, Your Responsibilities Will Be: Develop Techno-commercial proposals for field instrumentation and manage complete execution of Project Orders for Rosemount business. Provide pre-sales and post-sales technical support for Rosemount products Select suitable instruments based on the RFQ and detail the specifications Design instrumentation solutions based on the applications Provide Support to Emerson Sales Offices for efficient and effective Project Execution Prepare post order documentation. The position will be responsible for cleaning the documents, resolving the customer comments and timely submission. Attend internal project execution meetings to understand customer requirements and act accordingly. Procuring buyouts and co-ordination with the vendors Responsibility of meeting the project schedule Maintain log of key metrics for projects and proposals Who You Are: You readily action new challenges, without unnecessary planning. You know your strengths, weaknesses, opportunities, and limits. You show personal commitment and take-action to continuously improve. You learn quickly when facing new situations. You effectively communicate in various settings: one-on-one, small and large groups, or among diverse styles and position levels. For This Role, You Will Need : Experience upto 2- 4 years Minimum 2- 3 years in core instrumentation with Process Industry, EPC Companies or OEM companies. Clear understanding of basic working principles of Pressure, Temperature, DP Flow and Level meters, Radar Type Level meters, Flame and Gas monitoring Systems Familiarity with installation and calibration of instruments Familiarity with the Instrument Data Sheets and Specifications, International Standards for Hazardous, Flammable Areas, Ingress Protection Codes. Selection of suitable instrument types and models based on the customer specifications Ability to handle MS Office applications like Word, Excel and Power Point with ease. Familiarity with MS Projects will be an added advantage. Candidates with knowledge of documentation related to the post order activities will be preferred. Preferred Qualifications that Set You Apart: BE /B. Tech in Instrumentation Engineering from a reputed institute. Candidates with Post-Graduation (ME, M Tech) in Instrumentation Engineering may also apply. Our Culture & Commitment to You . .

Job Summary: If you are a Sales professional and looking for career opportunity, Emerson has an exciting offer to you! Digital Sales Engineer role will handle sales for Emerson s flow portfolio (Coriolis, Mag, Vortex & Ultrasonic Clamp on Flow meter), Products for Standard and Un Specified Customers in South Region. In this Role, Your Responsibilities Will Be: Generate enquiries/leads from existing/New customers preferably by Connecting with customers digitally however can also visit customers in person for important cases/customers if needed for Flow meters ( Coriolis, Electro-magnetic, Vortex, Density/Viscosity meters & Ultrasonic Clamp on Meters) Pre-qualify customer requests for quotation by understanding their requirements and explore opportunities for additional products or services Collaborate with internal customers during entire sales cycle Help customer to select optimum product according to the specifications and application, taking into consideration the customer s lead-time and budgetary requirements Pro-active follow-up of quotations with the goal of winning the order Respond to customer s commercial and technical questions (phone and e-mail) within reasonable time Verify that purchase orders are in accordance to the offered financial and technical proposal and resolve any issues that occur during the order cycle Maintain accurate and complete records in CRM and other tools as required. Act as a liaison between customers, sales offices and factories Forecast & Meet monthly and yearly budget numbers Who You Are : You create a positive and motivating working environment. You see the big picture, constantly imagine future scenarios, and create strategies to sustain competitive advantage. You quickly and decisively act in constantly evolving, unexpected situations You model collaboration across the organization. You stay focused and composed in stressful situations. For This Role, You Will Need: Sound knowledge of products, applications, industry processes driven positioning and business processes Basic knowledge of Instrumentation Flow meters experience will be added advantage Preferred Qualifications that Set You Apart: B. E Instrumentation or equivalent Engineering degree from reputed Institution with 1 to 2 Years Experience in Sales function. Experience on field instrumentation / Flow / Analytics / Software / Application is preferable Our Culture & Commitment to You: . .

Preparation of instruments data sheets, hook up drawings for process / pneumatics. Understanding of Project timelines and align with peers/inter department colleagues for effective project execution. Able to interpret P & IDs, identify Field, Panel/ Soft tags. Clear understanding of Process interlocks, dynamos and signages. To understand the Process logics for proper Field instrumentation. Knowledge and trouble shooting of Analyzers, control valves, etc. Understanding of P&ID and Preparation instrumentation I/O database in the DCS system. Knowledge of control philosophy for plant automation. Knowledge of the field instrumentation (sensors, transducers, drives related to Pressure, Flow, Temperature, Level Controllers etc.) Knowledge of DCS / PLCs and Ladder Logic Programs To determine requirement, indenting, follow up for instruments and their spares and their checking prior to their acceptance for storage / use. Ensuring availability of required latest Standards. Guide technicians for day to day activity and monitor their progress. Ensure proper addressing of non-conformities thru root cause analysis using Why Why technique, preparation of Monthly Reports, Update Instrument Tag list periodically, Prepare Weekly Maintenance Schedule and its updating as per IMS guidelines and system requirements. Should have hands on SAP System for material requirement creation and WBS Elements Ensure daily logbook factually and fully reflects activities carried out. Understanding Integrated Management Systems, and Safety procedures for carrying out JSA and ability to prepare SOPs. Educational Requirements : B.Tech./ B.E. Instrumentation Skills and academic qualifications Educational Qualifications Minimum Qualification - B.Tech./ B.E. Instrumentation

Develop and design instrumentation systems, control systems for industrial processes Preparation of Instrument List RFQ preparation, bid evaluation Preparation of Instrument List Preparation of Instrument Hook Up Drawings, Instrument Location Layout Required Candidate profile Exp in Instrumentation & Control System Design. Should have exp in Oil & gas or Food & Beverage industry. Exp with Logic development for Process & Safety Control System Selection of Instruments

Who We Are Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips- the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world- like AI and IoT. If you want to work beyond the cutting-edge, continuously pushing the boundaries of"science and engineering to make possible"the next generations of technology, join us to Make Possible® a Better Future. What We Offer Location: Bangalore,IND At Applied, we prioritize the well-being of you and your family and encourage you to bring your best self to work. Your happiness, health, and resiliency are at the core of our benefits and wellness programs. Our robust total rewards package makes it easier to take care of your whole self and your whole family. Were committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits . Youll also benefit from a supportive work culture that encourages you to learn, develop and grow your career as you take on challenges and drive innovative solutions for our customers."We empower our team to push the boundaries of what is possible"”while learning every day in a supportive leading global company. Visit our Careers website to learn more about careers at Applied. Engineering Subject Matter Expert- Instrumentation Level/GradeE3 General Profile Fully demonstrates in-depth knowledge, experience and works as a subject matter expert. Assigned as a resource for colleagues with less experience including as a coach/mentor. Works independently, receives guidance in only moderately complex situations. Competencies Metrology, control systems & Instrumentation, associated Software and algorithm, CI Product Characterization, Problem Solving, Tactical and Strategic planning, Data Analytics, Decision Making and Critical Thinking, Leading Change, CI Methodologies, Listening & Communication, Project Management Key Responsibilities Responsible for resolving problems associated with metrology and measurement systems of the module / product (Example; gauges, sensors, probes) including Integration and testing Accountable for solving issues associated with Software & algorithm, communication protocols, obsolescence etc. of these metrology instruments Experience is working on different PLC modules, troubleshooting and problem solving Drive Continuous Improvement methods to achieve breakthrough improvements in supplier performance metrics for identified modules / products Understand data trends and drive quantified results by analytical systems and processes. Demonstration of results through usage of problem-solving methods Collaborate with other Supplier Engg to eliminate Muda and implementation of processes improvements to achieve consistency and efficiency across or within manufacturing, supply chain and logistics Evaluate internal controls, communications, risk assessments and maintenance of documentation Support Kaizen Events and Lean Six Sigma Black Belt level projects within and across operations and divisions to optimize performance Control deviations at supplier and minimize the part to part variability to achieve excellent process capabilities (Cp, Cpk) Functional Knowledge Experience in Semi-Conductor Industry, with Knowledge on Tools and processes of Semi-Conductor. Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines. Problem Solving Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information Impact Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies Education Masters Degree in Metrology / Control Systems and Instrumentation / Adv Manufacturing Travel requirement: 30 % of the time Experience: 10+ years of relevant experience Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Yes, 10% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Your responsibilities: Evaluation of suppliers offers and vendor documentation. Understanding and reviewing technical specifications and drawings. Developing wiring, arrangement, layout diagrams and Bill of Material for systems Selection and sizing of instruments such as analyzers, solenoid valves, limit, pressure & level switches, pressure transmitters and flow instruments Cable level segregation, conduit and cable tray selection and sizing Selection and sizing of appropriate Power and Control cables and junction boxes for hazardous zones and non-hazard zones Developing a comprehensive system by interacting with interdisciplinary interfaces such as Mechanical, Controls, Sourcing and Installation & Field Services teams Building system and sub-systems to meet ISA, ASME, IEC, UL, CE, NEC, and ATEX standards. Tools: Proficiency with at least one of the tools will be added advantage Design: AutoCAD, SPI, COMOS Calculations: CONVAL, INSTRUCALC

The Principal Engineer is part of the hierarchical organization, reporting directly to Team Manager as direct discipline superior. Principal Engineer is having strong ability in technical matters with profound knowledge of applicable Engineering principles and processes with an emphasis on safe, compliant, reliable, efficient and practical solutions required for the engineering design and execution of proposals and projects. Principal engineer acts as the discipline lead engineer for various proposals and projects and is responsible to deliver the work within contractual framework, quality, and schedule and overall cost effectiveness, in order to meet the overall project desired results Role & responsibilities Participates in the development and implementation of engineering practices, workflows and procedures; recommends and implements resulting specs and procedures. Participates in reviews of work activities and projects; monitors workflow. Consults with and makes recommendations to SME and Project Management Teams. Controls key parameters (KPIs), benchmarks and efficiency figures to be applied in estimating equipment, material and man-hours. Contributes to optimization of engineering practices, workflows and procedures based on collected KPIs. Solves problems of various degrees of complexity. Coordinates and participates in the training programs for Engineers and Designers in the department. Attends and participates in professional group meetings; stays abreast of new trends and innovations in the field of Discipline engineering. Project execution Ensures compliance to Discipline Manual and Job Manual during project execution to ensure that all contractual requirements are implemented and fulfilled. Ensures good quality of the deliverables for the design work. Ensures completion of WBS elements within allotted man-hours and schedule dates. Ensures on time quality review of Inter-discipline documents and vendor deliverables. Contributes to implementation of safety relevant principles, standards, rules and procedures. Ensures implementation of lessons learnt identified for the assigned projects. Manages the technical procurement activities for various types of equipment. Reviews and approves Vendor documents applicable for the Discipline. Attends to inspections as per requirement of the inspection department Site assistance through replying to site queries. Able to perform Man Hours calculations using Discipline calculation tool. Technical Community Participates to the Discipline related technical community, Participates in the development of Discipline related technical standards, specifications and design criteria. Develops knowledge in the area of responsibility through seminars, training and execution of various projects. HSE, QA/QC Executes applicable scope of work in compliance with the requirements of the HSE Management System and IMS for the discipline/project. Ensures that the documentation is prepared, checked and approved according to Project Quality Plan and ready to be released by the respective Lead Engineer. Provides all necessary input to the lessons learnt process/capitalization and best engineering practice Competency Management Contributes to the development and implementation of competitive solutions. Applies technical and specialist knowledge to stay up-to-date with innovations and developments in the industry and continues to offer best practice. In alignment with the Head of Department , supports mentoring and coaching to meet current and future needs. DOMAIN KNOWLEDGE Leads & coordinates Instrumentation and Control System Engineering for Projects. Has wide discipline knowledge; good coordination skill with all the other Engineering disciplines, engineering sub-contractors, vendors and construction teams. Review of client ITB and provide clarifications / deviations for such proposals, Prepare of estimates wrt Instrumentation Cost, Man-hours. Experience in instrumentation design engineering including selection and technical procurement services for Cryo Automatic Valves, Cryo Flow elements, Analyser Shelters, Modin ,Prefabricated Control Room, Analysers, field instrumentation, Control systems, Possess good coordination skill with all the other Engineering disciplines, engineering sub-contractors, vendors and construction teams. Guiding Instrument designers for detail installation engineering related to Instrument cable tray routing ,Tray sizing, Junction box grouping , IO assignment , Hookup diagram, cable schedule, Bulk Material, wiring and loop circuit drawings Control room layout sizing and design. Preparation of instrumentation list and IO list System Engineering BPCS/PLC/SIS system , MMS system and FGS system, Control system Architecture, IO Assignments, Functional / Logic diagrams, HMI graphic layouts, Conducting FATs for the systems. Good knowledge in SIL Review and SIL verification process Calculations for Flow element, Control Valve , Intrinsic Loop, ups power , Heat load Procurement Engineering - Technical Requisition Summary, Specification , Vendor Offer review, Technical Bid Evaluation , Vendor document review and approval for Field Instruments, Automatic Valve , Analysers, Control System, Shelter /Modin and prefabricated room. Attending inspections, FATs as per requirement at the request of inspection department Anticipation and Identification of risks and opportunities and recommend mitigations during execution Effective Communication skills with proactive coordination to manage interdisciplinary workflow. Ability to identify cost optimization opportunities during project execution . Tool proficiency - Smart Plant Instrumentation (SPI) all modules , Calculation tool ,Navisworks Auto-CAD Required Qualifications And Competencies Degree in Engineering, with 9 to 13 years of overall industry experience Knowledge Knowledge and experience with various ASTM, IS, IEC codes and standards as well as various FEED and PMC standards. Evidence of Value Engineering efforts in executed projects. Conversant with SPI (Intools) is a must. Conversance with 3D model review software like SPR is desirable. Ability to work on all instruments for Material requisition, Technical bid evaluation and vendor deliverable review ( added advantage of analyser and control system).Commissioning and field execution experience is added advantage. Advanced analytical, problem solving, accuracy, attention to details, and interpersonal skills. Ability to establish deadlines for the team, manage priorities, and effectively achieve the goals in fast paced environment is critical. Strong written and verbal communication skills in English is essential. Ability to foster communication within diverse cultural environments. Ability to give and receive constructive feedback and to respond appropriately. Work Experience: Experience in EPC or Detail design engineering company in the engineering discipline for execution of projects in various sectors like Oil & Gas, Energy, Refining, Petrochemicals.

Experience :- 3-4 year In Validation/ Calibration Location : Surat Post :- Deputy Technical Manager Department :- Plant Maintenance Job time :- 8 hour shift duty Salary :- 30,000 - 40,000 CTC ( 25k - 45 k in hand ) Facility :- No Required Candidate profile Witness Material Testing, Inward Inspection, In-process Inspection Liaison with Third Party Inspectors Ensure valid Calibration Status of all measuring and monitoring instruments.

Designation :Instrumentation Engineer Qualification : BE Instrument Experience : 5+ Years in Chemical/Petrochemical CTC : Upto 8 LPA (Negotiable for Right candidate) Location :Uppugal TN

Site Engineer Location: Chennai Qualification: Diploma/ B.E./ B.Tech/MTech (Instrumentation) Instrumentation qualification is a must for this role. Experience: 1-3 Years Job Description Planning & scheduling project activities and manage appropriate manpower. Project Execution at site locations with optimum utilization of manpower and Equipments. Preparing, scheduling, coordinating and monitoring the assigned engineering projects. Interacting daily with the clients to interpret their needs and requirements and representing them in the field Perform overall quality control of the work (budget, schedule, plans, personnels performance) and report regularly on project status. Assign responsibilities and mentor project team. Cooperate and communicate effectively with project manager and other project. participants to provide assistance and technical support. Review engineering deliverables and initiate appropriate corrective actions. Cooperating and communicating with the Project Manager and other project participants and collaborating with Senior Engineers to create more efficient project methods and to maintain the projects profitability. Review the work progress on daily basis. Prepare internal and external reports pertaining to job status. Plan ahead to prevent problems and resolve any emerging ones. Instrumentation knowledge related Radar Gauge, Flow meter, TAS projects OIL, Gas & Alcohol sector. Overall safety knowledge Customer handling

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Manufacturing Engineering MES Good to have skills : NAMinimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Operations Engineer, you will support the operations and/or manage delivery for production systems and services based on operational requirements and service agreement. Your typical day will involve ensuring smooth operations and timely delivery of services. Roles & Responsibilities:-Leading the project team for successful execution of the project with focus on quality deliverable within budget and given timeline-Responsible for design, implementation and testing of DCS software application (HMI and Associated control strategies entity)-Act as a primary technical work with customer for entire scope of the project-Develop design specification and configuration guidelines by understanding customer demands and expectations-Has a good knowledge of the DCS system and exposure to S88 architecture is must-Should have experience on Batch process e.g. Pharma, API-Conduct technical reviews for quality checks-Conducting or participation in SFAT-Channeling technical queries-Coach and develop system engineer skills-Review validate work before sending to customer-Provide technical clarification-Ensuring timely and quality work-Change control management Professional & Technical Skills: -Must Have Skills: Minimum 7.5 years of Emerson DeltaV DCS Pharma Project Execution Experience-Knowledge of S88 standard and certified GAMP5 and GDP requirements-Should have knowledge of Validation aspects and related software-Strong understanding of software engineering principles and methodologies.-Experience in leading the design, build, and configuration of applications.-Experience in developing and maintaining project plans.-Excellent communication and collaboration skills. Additional Information:-The candidate should have a minimum of 7.5 years of Emerson DeltaV DCS Pharma Project Execution Experience-This position is based at our Kolkata, Bengaluru, Pune, Mumbai, Chennai, Hyderabad and Ahmedabad office.-A full-time 15 years of education is required. Qualification 15 years full time education

Project Role : Application Architect Project Role Description : Provide functional and/or technical expertise to plan, analyze, define and support the delivery of future functional and technical capabilities for an application or group of applications. Assist in facilitating impact assessment efforts and in producing and reviewing estimates for client work requests. Must have skills : Manufacturing Engineering MES Good to have skills : NAMinimum 7.5 year(s) of experience is required Educational Qualification : Minimum 15 years of full time education Summary :As an Operations Engineer, you will support the operations and/or manage delivery for production systems and services based on operational requirements and service agreement. Your typical day will involve ensuring smooth operations and timely delivery of services. Roles & Responsibilities:-Leading the project team for successful execution of the project with focus on quality deliverable within budget and given timeline-Responsible for design, implementation and testing of DCS software application (HMI and Associated control strategies entity)-Act as a primary technical work with customer for entire scope of the project-Develop design specification and configuration guidelines by understanding customer demands and expectations-Has a good knowledge of the DCS system and exposure to S88 architecture is must-Should have experience on Batch process e.g. Pharma, API-Conduct technical reviews for quality checks-Conducting or participation in SFAT-Channeling technical queries-Coach and develop system engineer skills-Review validate work before sending to customer-Provide technical clarification-Ensuring timely and quality work-Change control management Professional & Technical Skills: -Must Have Skills: Minimum 7.5 years of Emerson DeltaV DCS Pharma Project Execution Experience-Knowledge of S88 standard and certified GAMP5 and GDP requirements-Should have knowledge of Validation aspects and related software-Strong understanding of software engineering principles and methodologies.-Experience in leading the design, build, and configuration of applications.-Experience in developing and maintaining project plans.-Excellent communication and collaboration skills. Additional Information:-The candidate should have a minimum of 7.5 years of Emerson DeltaV DCS Pharma Project Execution Experience-This position is based at our Pune, Kolkata, Bengaluru, Hyderabad, Mumbai, Chennai and Ahmedabad office.-A full-time 15 years of education is required. Qualification Minimum 15 years of full time education

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Manufacturing Engineering MES Good to have skills : NAMinimum 7.5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Lead, you will lead the effort to design, build, and configure applications, acting as the primary point of contact. Your typical day will involve collaborating with various teams to ensure that application development aligns with business objectives, overseeing project timelines, and facilitating communication among stakeholders to drive project success. You will also engage in problem-solving activities, providing guidance and support to your team while ensuring that best practices are followed throughout the development process. Your role will be pivotal in shaping the direction of application projects and ensuring that they meet the needs of the organization and its clients. Roles & Responsibilities:Provide second-level support for Syncade MES-related issues.Troubleshoot and resolve issues related to workflows, recipes, equipment integration, and batch report.Collaborate with cross-functional teams (SAP, MuleSoft, CLM) to support batch execution and electronic batch record (EBR) integrity.Support system upgrades, patches, and validation activities.Develop and maintain documentation including support procedures, configuration changes, and training materials.Participate in root cause analysis and continuous improvement initiatives related to MES performance and reliability.Ensure compliance with GxP, FDA 21 CFR Part 11, and other regulatory requirements through ITSM Process (Incident Management, Problem Management, Change Management).Provide training and support to end-users as needed.Experience with SQL, XML, or VB scripting for troubleshooting or reporting.Familiarity with data integration between MES and ERP/LIMS system using BI framework. Professional & Technical Skills: - Must To Have Skills: Proficiency in Emerson Syncade MES- Strong understanding of application design and development processes.- Experience with project management methodologies and tools.- Ability to analyze complex problems and develop effective solutions.- Familiarity with software development life cycle and best practices. Additional Information:- The candidate should have minimum 7.5 years of experience in Manufacturing Engineering MES.- This position is based at our Bengaluru office.- A 15 years full time education is required. Qualification 15 years full time education

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Manufacturing Engineering MES Good to have skills : NAMinimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Operations Engineer, you will support the operations and/or manage delivery for production systems and services based on operational requirements and service agreement. Your typical day will involve ensuring smooth operations and timely delivery of services. Roles & Responsibilities:-Leading the project team for successful execution of the project with focus on quality deliverable within budget and given timeline-Responsible for design, implementation and testing of DCS software application (HMI and Associated control strategies entity)-Act as a primary technical work with customer for entire scope of the project-Develop design specification and configuration guidelines by understanding customer demands and expectations-Has a good knowledge of the DCS system and exposure to S88 architecture is must-Should have experience on Batch process e.g. Pharma, API-Conduct technical reviews for quality checks-Conducting or participation in SFAT-Channeling technical queries-Coach and develop system engineer skills-Review validate work before sending to customer-Provide technical clarification-Ensuring timely and quality work-Change control management Professional & Technical Skills: -Must Have Skills: Minimum 5 years of Emerson DeltaV DCS Pharma Project Execution Experience-Knowledge of S88 standard and certified GAMP5 and GDP requirements-Should have knowledge of Validation aspects and related software-Strong understanding of software engineering principles and methodologies.-Experience in leading the design, build, and configuration of applications.-Experience in developing and maintaining project plans.-Excellent communication and collaboration skills. Additional Information:-The candidate should have a minimum of 5 years of Emerson DeltaV DCS Pharma Project Execution Experience-This position is based at our Pune, Kolkata, Bengaluru, Hyderabad, Mumbai, Chennai and Ahmedabad office.-A full-time 15 years of education is required. Qualification 15 years full time education