141 Design Reviews Jobs - Page 5

Project Management Product design Development Design reviews DFM GD&T Project Planning Project Costing Budget management Timeline management Role: Design Manager Industry Type: Auto Components Department: Research & Development Employment Type: Full Time, Permanent Role Category: Engineering & Manufacturing Education UG: B.Tech/B.E. in Any Specialization

Project Management Product design Development Design reviews DFM GD&T Project Planning Project Costing Budget management Timeline management Role: Design Manager Industry Type: Auto Components Department: Research & Development Employment Type: Full Time, Permanent Role Category: Engineering & Manufacturing Education UG: B.Tech/B.E. in Any Specialization

As a Process Design & Optimization Engineer, you will be responsible for developing and optimizing LNG liquefaction, regasification, and storage processes. You will perform simulations, modeling, and analysis of chemical processes using tools like Aspen Plus or HYSYS. Your role will also involve monitoring and troubleshooting LNG plant operations to ensure smooth functioning. You will collaborate with operations teams to improve plant performance and efficiency. In addition, you will contribute to new projects by conducting feasibility studies, design reviews, and commissioning. You will work closely with project teams to ensure timely and cost-effective delivery. Ensuring health, safety, and environmental compliance will be a key part of your responsibilities. You will implement safety protocols, ensure compliance with industry regulations, and conduct risk assessments and HAZOP studies for new and existing processes. As part of the research & development aspect of the role, you will explore innovative technologies to improve LNG processing and reduce carbon emissions. You will also evaluate new materials and catalysts for enhanced performance. Collaboration with cross-functional teams, including mechanical, electrical, and instrumentation engineers, will be essential. You will provide technical expertise to support training and development initiatives. This is a full-time position with a day shift and morning shift schedule. The work location is in person.,

As a Senior Lead Site Reliability Engineer (SRE) in Thane / Lower Parel, you will be an integral part of the SRE practice ensuring the reliability, availability, scalability, and efficiency of systems. Your role will involve designing, implementing, and governing systems for reliability, availability, and scalability. You will be responsible for developing incident response processes, collaborating with development teams, and ensuring applications are designed with reliability in mind. Additionally, you will support continuous system improvements, manage platform tools, and ensure minimal downtime. Key Responsibilities - Design, implement, and govern systems for reliability, availability, and scalability. - Develop incident response processes for quick resolution. - Collaborate with development teams to ensure applications are designed with reliability. - Perform competitive analysis to maintain minimal downtime. - Support IT architecture alignment, integration design, and design reviews. - Manage platform tools for high availability and disaster recovery across on-premises and cloud infrastructure. - Mentor team members and collaborate with vendor IT teams. Key Result Areas - Assist SRE team on deployment and technical functions on DAST and IAST to perform any kind of vulnerability at runtime. - Maintain and monitor application environments, including patching and upgrades. - Ensure application availability, scalability, and fault tolerance. - Contribute to solution architecture and identify trade-offs in cost, performance, and scalability. - Collaborate on deployment plans and maintain adherence to security and enterprise standards. - Lead a team of SREs, ensuring system performance meets business and technical requirements. Qualifications & Experience - Education: BE/ B. Tech. / ME / M. Tech. / MCA - 8-15 years of relevant experience in SRE, IT infrastructure management, and application lifecycle best practices. - Strong knowledge of cloud infrastructure, disaster recovery, and IT security frameworks. - Excellent collaboration skills with both internal and vendor teams. - Leadership experience is a plus.,

As a Senior Electrical Engineer within our team, you will be responsible for preparing proposals and developing scopes, which includes conceptual designs and execution plans. You will play a lead technical role in P&C design projects ranging from 11kV up to 400kV, and you may also act as the senior Engineer on project teams when necessary. Your primary tasks will involve generating engineering cost and man-hour estimates, as well as schedules. You will be expected to produce detailed electricity substation P&C design packages that comply with required client and technical standards (IEC/IEEE etc.). This includes designing protection and control systems, such as Relay one-line diagrams, schematics diagrams, wiring diagrams, front view diagrams, SCADA architecture, signal lists, and cable schedules. You should also be capable of updating equipment drawings based on the scheme for Rind bus, one and a half breaker, and two bus systems. In addition, you will be responsible for preparing calculations and reports for engineering studies, such as voltage drop analysis, AC/DC load studies, and other relevant studies. You will facilitate coordination of design activities across different departments, including Civil/Structural and Physical Engineers. Regular design reviews, virtual meetings, and close collaboration with clients will be part of your routine tasks. As part of the team, you will also coordinate with team members to monitor project schedules and ensure the delivery of high-quality work. Collaboration with the US Energy Engineering Team and WSP US Office is essential for effective project execution. Your role will involve providing guidance and mentorship to less experienced team members, as well as developing and enhancing processes, tools, and potentially implementing new technologies into the design process. Maintaining a Safety by Design approach on all projects is crucial. You will be expected to conduct periodic quality checks for other engineers and designers, and exhibit ingenuity, foresight, and wise decision-making skills to proactively identify and resolve challenges. Your contribution to departmental tools and workflows aimed at improving the effectiveness of design processes, specification development, and project implementation is highly valued. Participation in training sessions and meetings dedicated to addressing targeted organizational initiatives is encouraged to contribute to the progress and growth of the team. Your role as a Senior Electrical Engineer is pivotal in driving the success of our projects and ensuring the quality of our deliverables.,

As our new Software Tester, you will play a crucial role in supporting the growth and strengthening the relationships with our North American clients. Your responsibilities will include reviewing software requirements, preparing test scenarios, executing testing at all levels (both Manual & Automated), collaborating with team members and departments, analyzing test results, preparing reports, interacting with clients to understand product requirements, participating in design reviews, detecting and tracking software defects, providing support and documentation, and building automated test cases using Selenium software. To excel in this role, you should be an honest team player with attention to detail, hold a bachelor's degree in computer science or a related field, possess at least 1 year of experience as a Software Tester or in a similar role, have the ability to manage multiple tasks simultaneously, thrive in a fast-paced environment with minimal supervision, demonstrate a sense of ownership and pride in your work, exhibit critical thinking and problem-solving skills, possess excellent interpersonal and communication skills, stay updated on software test design and testing methodologies, and have a working knowledge of test techniques and compatibility with various software programs.,

YASH Technologies is a leading technology integrator specializing in helping clients reimagine operating models, enhance competitiveness, optimize costs, foster exceptional stakeholder experiences, and drive business transformation. At YASH, you will be part of a team of bright professionals working with cutting-edge technologies. Our purpose is anchored in bringing real positive changes in an increasingly virtual world, driving us beyond generational gaps and future disruptions. We are currently seeking experienced Salesforce Development Professionals with 8-10 years of experience. As a Salesforce Development Professional, your responsibilities will include collaborating with business stakeholders, project managers, and development teams to design and deliver technical solutions that meet business requirements. You will define technical standards, best practices, frameworks, and methodologies for the development and implementation of technical solutions. Working closely with the Engineering Manager, you will establish guidelines for software engineering practices including code organization, branching strategies, code coverage & quality, CI/CD pipelines, security/performance guidelines. Additionally, you will create and maintain technical documents such as architectural diagrams, system documentation, and standard operating procedures. Your role will involve providing technical leadership and guidance to development teams, ensuring adherence to defined best practices and standards. You will participate in architecture and design reviews to identify and address technical risks and issues early in the development lifecycle. Moreover, you will be responsible for identifying and mitigating technical debt and other issues that impact the performance and maintainability of software systems. Your duties will also include conducting research on emerging technologies and making recommendations on leveraging them to improve existing systems and processes. In terms of technical competencies, you should have a basic understanding of system design principles, technical architecture concepts, emerging technologies, and design principles. You should also be knowledgeable about architecture tools and frameworks, product/technology specifications, estimation and resource planning techniques, software engineering principles, and best practices. Furthermore, as part of the YASH team, you will be encouraged to take responsibility for ensuring the accuracy of results and deadlines. Collaboration, agility, customer focus, effective communication, driving results, and conflict resolution are essential behavioral competencies expected in this role. At YASH, we provide a career-oriented skilling model to enhance continuous learning, unlearning, and relearning at a rapid pace and scale. Our workplace is grounded upon principles of flexible work arrangements, free spirit, emotional positivity, agile self-determination, trust, transparency, open collaboration, and all necessary support for achieving business goals in a stable employment environment with a great atmosphere and ethical corporate culture.,

YASH Technologies is a leading technology integrator specializing in helping clients reimagine operating models, enhance competitiveness, optimize costs, foster exceptional stakeholder experiences, and drive business transformation. At YASH, we are a cluster of the brightest stars working with cutting-edge technologies. Our purpose is anchored in a single truth - bringing real positive changes in an increasingly virtual world, driving us beyond generational gaps and disruptions of the future. We are looking forward to hiring Salesforce Sales Cloud Professionals with 10-13 years of experience. As a Salesforce Sales Cloud Professional, you will lead the design and development of technical solutions, ensuring alignment with business objectives and requirements. You will define technical standards, best practices, frameworks, methodologies, reference architecture, and design patterns for the development and implementation of the technical solution. Working closely with the Engineering Manager, you will establish guidelines for software engineering practices, including code organization, branching strategies, code coverage & quality, CI/CD pipelines, and security/performance guidelines. Your responsibilities will include creating and maintaining technical documents such as architectural diagrams, system documentation, and standard operating procedures. Providing technical leadership and guidance to development teams, ensuring adherence to defined best practices and standards. Participating in architecture and design reviews to identify and address technical risks and issues early in the development lifecycle. Identifying and mitigating technical debt and other technical issues that impact the performance and maintainability of software systems. Conducting research on emerging technologies and making recommendations on how to leverage them to improve existing systems and processes. Additionally, you will establish standards, best practices, frameworks, methodologies, and reference architectures and implementations for Technical, Business, and Industry solutions, while grooming and mentoring Junior Technical Architects in the team. You should have a good understanding of system design principles and be able to independently design moderately complex systems, explaining design decisions to stakeholders. Possessing knowledge and experience in implementing technical architectures, you should be able to design technical architectures that meet basic business requirements. Managing emerging technology projects and ensuring best practices are being followed, you will develop and implement emerging technology strategies that support the organization's strategic objectives. In terms of technical competencies, you are expected to have expert knowledge of architecture Industry tools & frameworks with accreditation/certification in the relevant areas. You should be able to tailor architectural methods, make decisions in the tool selection process, and provide future direction for tools and framework selection. Having a good understanding of design principles and implementation techniques will be essential. You should be proficient in software design patterns and principles, version control systems, basic DevOps concepts, testing methodologies and tools, and writing clean, maintainable code following best practices. Collaboration with cross-functional teams and the ability to work independently on projects are also key aspects of this role. Your behavioral competencies should include accountability, agility, collaboration, customer focus, communication, driving results, and conflict resolution. At YASH, you will have the opportunity to create a career in an inclusive team environment, leveraging career-oriented skilling models and continuous learning, unlearning, and relearning aided with technology. Our Hyperlearning workplace is grounded upon flexible work arrangements, free spirit, emotional positivity, agile self-determination, trust, transparency, open collaboration, support for business goals, stable employment, great atmosphere, and ethical corporate culture.,

The Mechanical Engineer at Lam will be responsible for designing and defining cutting-edge mechanical, thermo-mechanical, and electro-mechanical systems. Your role will involve feasibility studies, testing, and detailed design & development. You will own and execute medium-complex Mechanical sub-system projects to design, develop, optimize, and implement design solutions in Lam Products. These projects will be driven as part of NPD, Continuous Improvement Programs (CIP), cost reduction, and/or reliability improvement initiatives. In collaboration with both internal and external Cross Functional Teams (CFT), you will ensure that the product design meets its objectives, validate the design through performance testing, and obtain approvals by following the Product Development & Release (PDR) process. You will develop and present reports/presentations of excellent quality that communicate design intent, analysis, and validation at design reviews. Additionally, you will develop and execute test plans to generate characterization data sufficient to understand and validate the performance of the design. Your responsibilities will also include performing analytical work to characterize and specify designs, including heat transfer, stress, vibrations, fluid/gas dynamics, and manufacturability. You will design and develop thermo-mechanical components with an understanding of fluid flow characteristics. The ideal candidate for this role will have a Bachelors's or Masters's degree in Mechanical Engineering with a minimum of 4-8 years of relevant experience. Hands-on experience in taking designs from concepts to detailed engineering, including tolerance analysis, problem-solving, testing, and interaction with suppliers, will be valuable. You should be able to identify technical risks and mitigate them through appropriate calculations, conduct design reviews, and seek approval in collaboration with stakeholders to implement design. Excellent verbal and written communication skills are essential for this role, as you will be required to present design concepts to peers and management effectively. Knowledge and exposure to relevant industry standards such as ANSI, ASME, SAE, ISO, and SEMI will be preferred. At Lam, we believe in fostering an inclusive and empowering environment where every individual can achieve their full potential. Our commitment is to bring together unique individuals and viewpoints to achieve extraordinary results.,

We are seeking a talented Systems Engineer to join our team in Hyderabad with over 4 years of experience. As a Systems Engineer, you will focus on developing user interface specifications and system requirements for medical software applications. Collaboration with product managers, UX designers, and software developers is key to defining and documenting user-centered requirements that comply with regulatory standards and enhance the user experience. Your expertise will be crucial in ensuring that our medical software solutions are effective, intuitive, and meet industry standards. Your responsibilities will include: - Gathering and analyzing user needs to create comprehensive user interface specifications. - Formulating clear and detailed system requirements that are in line with product objectives and regulatory guidelines. - Working closely with UX/UI designers to ensure that specifications support an optimal user experience. - Collaborating with software development teams to translate specifications into functional designs. - Conducting requirement reviews and validation sessions with stakeholders to ensure accuracy and completeness. - Maintaining updated documentation of requirements and specifications throughout the software development lifecycle. - Participating in design reviews and offering input on technical feasibility and usability. - Supporting compliance activities to ensure that all specifications meet relevant medical regulations and standards. About CADVision: CADVision is a prominent provider of digital transformation and smart product engineering services for various industries, including Medical Devices and Transportation. Our culture emphasizes building modular and scalable solutions to enhance our clients" digital journey. As a trusted partner, we work closely with clients to address business challenges by delivering software development, product development, design/process automation, and more using cutting-edge technologies. CADVision is dedicated to creating engineering software tools and products that are effective, easy to adopt, and have a significant impact on the industry. Our initiatives such as the CADVision Quality Score and CADVision Product Mindset empower our employees to approach each project with a focus on scalability, robustness, configurability, and modular design. Over the past decade, CADVision has established strong relationships with its customers.,

As an Electrical Design Engineer at our company located in Thiruppur, you will be responsible for designing and developing control panel layouts, wiring diagrams, and schematics to meet customer specifications and industry standards. Using CAD tools such as AutoCAD Electrical, EPLAN, or equivalent, you will create detailed electrical drawings. Your role will involve selecting appropriate electrical components like contactors, relays, PLCs, and breakers based on application and load requirements. It will be crucial for you to ensure compliance with relevant electrical standards and safety regulations such as IEC, NEC, and IS. Collaboration with production and quality teams will be essential to resolve design issues and ensure the manufacturability of control panels. You will conduct design reviews, cost optimization, and risk assessments for both new and existing panel designs. Maintaining the Bill of Materials (BOM) and updating documentation in response to change requests or project needs will also be part of your responsibilities. In addition, you may need to support troubleshooting and testing of control panels during production if required. Furthermore, you will be expected to communicate effectively with clients, vendors, and internal teams to provide technical clarifications and obtain necessary approvals. Your ability to work closely with various stakeholders will contribute to the successful execution of projects. If you have 5 to 10 years of experience for the Senior Role or 2 to 3 years for the Junior Role in electrical design engineering, and possess a strong understanding of control panel engineering, we encourage you to apply for this challenging opportunity.,

As a Senior UX/UI Designer at our company, you will be responsible for creating innovative and intuitive designs through direct stakeholder engagement. You will take ownership of design tasks and collaborate within a fast-paced environment while maintaining a positive and professional attitude. Your technical expertise in Figma and Design Systems will be crucial, along with the ability to balance team collaboration and individual contribution effectively. To excel in this role, you should have 6-8 years of experience in User Experience Design, particularly in product and web/mobile application design. A degree in B.Des/M.Des/MFA or equivalent qualification is required, along with a detailed UX artifacts portfolio. Knowledge of Product Design, Design Thinking, Usability, and Visual Design Principles is essential, as well as excellent communication and presentation skills. You should be adept at working in team environments and contributing to shared design goals. Your key responsibilities will include collaborating with key stakeholders to gather requirements, providing constructive feedback in design reviews, creating detailed wireframes and prototypes using advanced Figma skills, and working alongside designers and developers in a solution-oriented manner. You will be expected to develop innovative solutions, demonstrate adaptability to changing project requirements, deliver compelling design presentations, and contribute to a culture of design thinking and innovation. At our company, we prioritize a culture of caring and offer continuous learning and development opportunities. You will have the chance to work on meaningful projects, maintain a healthy work-life balance, and be part of a high-trust organization that values integrity and trust. Join us at GlobalLogic, a trusted digital engineering partner known for creating innovative digital products and experiences in collaboration with forward-thinking companies around the world.,

As a mechanical design engineer, you will be responsible for utilizing Autodesk Inventor to design and enhance mechanical products, ensuring they meet manufacturing requirements and industry standards. Your role involves interpreting customer needs, estimating project efforts, and managing schedules effectively. You will analyze and improve product design drawings, identify areas for process enhancement, and collaborate with diverse teams to provide project updates. Your experience in the mechanical industry, particularly in machine and equipment design, along with a Bachelor's degree in Mechanical or Production Engineering (or equivalent experience), will be essential. You must possess a strong background in creating detailed drawings and technical documentation, as well as expertise in machine design, gear selection, and industrial product development. Proficiency in manual calculations for design verification, and familiarity with GD&T standards, are crucial for this role. In addition to your technical skills, you should excel in team collaboration and customer communication, actively participating in design reviews. Proficiency in SolidWorks for modeling and design work is required, while experience with AutoCAD/Inventor and PLM/PDM systems is preferred. Knowledge of industry standards such as EN, DIN, ISO, and ASME compliance will be beneficial. Desired skills include hands-on experience with Autodesk Inventor, familiarity with Evaporators, Plate Heat Exchangers, and Cooling Systems, and the ability to introduce automation in 3D modeling processes. Exposure to North American/European clients, additional CAD tools, and Quality Management Systems (QMS) are considered advantageous for this role. Overall, your expertise in mechanical design, proficiency in Autodesk software, and strong collaboration skills will be key to success in this role.,

The main responsibility of this role is to plan, organize, and ensure the engineering and reliability of High-Power Rectifier Systems for Electrolyzers, focusing on scaling up the system within approved budgets and cost optimization measures. You will be accountable for various tasks related to the engineering and reliability of High-Power Rectifier Systems and Heater Panels, including detailed design reviews, selection of appropriate systems, commissioning, testing, and performance monitoring. Additionally, you will be responsible for continuous improvement in design, statutory and regulatory compliance, preparation of engineering specification documents, liaison with OEMs/consultants, and standardization of maintenance practices. Your role will also involve improving reliability through continuous improvement techniques, identifying training needs for engineers, setting milestones for the team, coordinating with technology heads, evaluating repair and refurbishment facilities, and ensuring adherence to power electronics principles, practices, and codes. You should have a profound knowledge of High-Power Rectifier Systems, power electronics principles, and industrial testing procedures. Additionally, you should possess a BE/B.Tech/M.Tech in Electrical Engineering with specialization in Power Electronics and at least 15 years of experience in detailed engineering of such systems. Key attributes for this role include strong analytical, networking, and communication skills, along with the ability to review and optimize layouts, electrical diagrams, and bills of quantities. You should also be familiar with the latest technological trends in the Electrolysers segment, tools for simulation and modeling, system sizing calculations, and integration techniques. Your role will involve participating in design reviews with cross-functional teams and facilitating learning and skill development for engineers in High-Power Rectifier Systems.,

You will be leading a team of talented multidisciplinary designers at one of the fastest-growing tech startups in the nation, with the aim of transforming it into the best design team in the industry. Your responsibilities will include managing the team, overseeing various design projects, and ensuring that the output aligns with business goals, meets deadlines, and maintains a high quality standard. Together with design leads, you will shape the product direction, drive design-led projects, and contribute to the development of design systems. As a design leader, you will mentor, guide, and lead the team members, facilitating their growth by enhancing their skills, defining career paths, and enabling them to excel in their roles. You will play a key role in setting high-quality standards, guiding product teams to deliver at that level without compromising on velocity. Additionally, you will drive the improvement of design processes by implementing best practices, incorporating user feedback and data into decision-making, and establishing frameworks and guidelines for efficient delivery. Your role will involve conducting design reviews, facilitating design sprints and workshops, prioritizing research and design enhancements, and sharing engineering principles to provide a holistic viewpoint. It is essential to collaborate closely with key team members, including the CEO & Co-Founder, the Founder & Managing Director, the Director of Design, and the Head of Design, to ensure alignment with the organization's goals and objectives.,

At EY, you will have the opportunity to carve out a career path that is as unique as you are. With our global reach, supportive environment, inclusive culture, and cutting-edge technology, you will have the resources to become the best version of yourself. We value your distinct voice and perspective, as they play a crucial role in helping EY continuously improve. Join us to create an exceptional experience for yourself while contributing to building a better working world for all. With 6-10 years of relevant experience in Oracle ERP Financials (formerly known as E-Business Suite) and a minimum of 2 years working with Fusion Financials, you are well-equipped to excel in this role. Your experience should include involvement in at least 3 full life cycle implementations, with at least one on Fusion Financials. Additionally, familiarity with Project Accounting and Supply Chain modules is beneficial. Your client-facing experience, proficiency in handling integrations and data conversion activities, and expertise in solution design and functional specs drafting are highly valued. In this role, your primary responsibilities will involve requirements gathering and documentation using AIM/OUM or other prescribed methodologies. You will lead CRP sessions, participate in design reviews, and effectively interpret functional requirements to design and deliver solutions from offshore. Your role will also include designing module-specific solutions within the integrated Oracle Fusion context, conducting Solution Design/Functional Fit-Gap/Training/Testing sessions, and providing support during CRPs/SITs/UATs. Ensuring the preparation of quality deliverables, test scripts, test cases, and conducting trainings will be key to your success. Moreover, your support to the Project Management Office (PMO) will be instrumental. To excel in this role, you must possess strong communication skills to translate requirements into design documents, proficiency in documenting using OUM or similar methodologies, and effective customer handling skills to lead and mentor team members. Your ability to work under pressure, meet deadlines, demonstrate excellent organizational and time management skills, and solve problems analytically are essential. The role also requires quick acquisition and application of complex business knowledge, teamwork, adherence to release management processes, multitasking while focusing on release priorities, and holding a valid passport due to potential client site work and business travel. For this position, a CA/CWA/MBA-Finance qualification is preferred. Join EY in its mission to build a better working world, where diverse teams across 150 countries leverage data and technology to provide trust through assurance, support client growth and transformation, and tackle complex global challenges across assurance, consulting, law, strategy, tax, and transactions. EY teams are committed to asking better questions to uncover new solutions that address the pressing issues of today's world.,

As an Electrical Engineer at Northern Tool, you will be responsible for performing electrical engineering activities as per the provided scope of work. You will be tasked with owning and maintaining the design, components, and assemblies with Design for Manufacturing and Assembly (DFMA) techniques to minimize product cost through design and process improvements. This includes creating specifications, conducting preliminary design reviews, and facilitating critical design reviews. Your role will also involve creating electrical system test requirements, determining the ideal component and wire harness design to ensure overall design, performance, and cost conformance. You will be responsible for identifying the nature and type of CAD models, detail drawings, and analysis needed to support the above tasks and supervising their release through the release cycle. In this position, you will be required to generate concept sketches on paper as well as detailed part designs model and drawing using Creo. Additionally, you will lead and participate in design reviews on projects to ensure adequate input and involvement from all interested groups. You will evaluate designs using engineering calculations, principles of material behavior, and design analysis tools for DTC and DFM, while also applying design for manufacture principles when designing parts and assemblies.,

Innovation, sustainability, and productivity are the key pillars driving the mission of sustaining the noble work of farmers and builders globally. With a focus on addressing the challenges posed by a growing population and increased resource demands, our products play a crucial role in feeding and sheltering communities worldwide. As part of our team, you will have the opportunity to contribute to the development of products that harness alternative power sources and incorporate precision technology to enhance productivity. Your involvement is essential in ensuring that these solutions positively impact people's lives. If you are excited about building your skills within a collaborative and diverse global team, this is the perfect place for you to grow your career and shape the future. Join us at the forefront of innovation in agriculture and construction, where we are dedicated to driving customer efficiency and success through continuous innovation. Collaboration is at the core of our work at CNH Industrial, as we strive to reach new heights as a unified team, consistently delivering value to our customers. Responsibilities: - Proficient in interpreting engineering drawings and planning projects effectively. - Oversee EC & ECO system planning and implementation within the workshop. - Conduct design reviews to ensure assembly feasibility and address any feasibility issues. - Lead the development of vehicle process assembly, validation, and Start of Production (SOP). - Plan and implement standard tools on the assembly line to align with the Design for New & Current Product processes. - Troubleshoot line issues and participate in failure analysis for the assembly process. - Utilize problem-solving tools such as 8D, 7 Steps approach, etc., to address challenges effectively. - Prepare and release SOP/OPL for Assembly, Fabrication & Paint Shop for current and new products. - Drive the adoption of new assembly techniques to enhance process efficiency. - Design assembly flow lines and provide necessary facilities and tools for the assembly line. - Engage in lean manufacturing activities and continuous improvement projects. - Maintain PFMEA, DFMEA activities, and adhere to World Class Manufacturing (WCM) standards. Experience Required: - 3-5 years of relevant experience Preferred Qualifications: - BE Mechanical Join us for dynamic career opportunities on a global scale. We are committed to creating a workplace that values diversity and fosters a culture of respect. Our comprehensive benefits package includes flexible work arrangements, savings & retirement benefits, tuition reimbursement, parental leave, adoption assistance, and more. Take the next step in your career with us and be part of building a better future. Apply now to be a part of our team.,

You are being sought after to fill the role of Lead Piping Engineer in a renowned company that specializes in Power & Energy projects. Based in Bangalore at the Global Design Centre, this position requires a minimum of 15 years of experience in the field. In this role, your primary responsibility will be to oversee the piping design, analysis, and optimization processes for intricate power plant and energy ventures. Your expertise will be pivotal in delivering top-notch engineering solutions and directing a diverse team of professionals. Your tasks will include managing various piping design components such as layouts, isometric drawings, and 3D models. You will conduct stress and flexibility analysis utilizing tools like CAESAR II or equivalent software. Developing piping specifications, Material Take-Offs (MTOs), and line lists will also be part of your mandate. Ensuring adherence to industry standards such as ASME, API, and project-specific requirements is crucial. Additionally, your involvement in design reviews, 3D model assessments, and risk assessment workshops will be essential. Collaboration with vendors, addressing technical queries, and providing support during construction, commissioning, and startup phases will also be expected. To qualify for this role, you should hold a Bachelor's degree in Mechanical Engineering (preferably with a PE license) and possess over 15 years of experience in piping engineering within the power or oil & gas sectors. A solid background in combined cycle power plants and gas turbines is essential. Proficiency in tools like CAESAR II, AutoCAD, and PDMS/SP3D is required. An in-depth understanding of safety protocols, regulations, and environmental standards is necessary. Exceptional problem-solving abilities and a collaborative mindset are highly valued. Flexibility to travel or work at project sites when needed is expected. If you are excited about this opportunity, please share your CV at vikash.kushawaha@smec.com and become part of groundbreaking energy projects that contribute to a sustainable future.,

We are seeking a highly skilled Senior UX/UI Designer with a strong background in creating innovative and user-friendly designs. In this role, you will engage directly with stakeholders, take charge of design tasks, and collaborate effectively within a dynamic work environment. The ideal candidate will possess exceptional proficiency in Figma and Design Systems, be adaptable to changing circumstances, and strike a balance between team collaboration and individual contribution while maintaining a positive and professional demeanor. With 6-8 years of experience as a User Experience Designer, you should have a solid foundation in product and web/mobile application design. A degree in B.Des/M.Des/MFA or an equivalent qualification is required. A comprehensive online portfolio showcasing detailed UX artifacts is essential. Proficiency in Product Design, Design Thinking, Usability, and Visual Design Principles is a prerequisite. Strong communication (both written and verbal) and presentation skills are a must, along with experience in working within team environments to achieve shared design objectives. Key Skills: - Proficient in Figma, Design Systems, and other design tools - Strong analytical and creative problem-solving abilities - Excellent written and verbal communication skills - Capable of delivering impactful presentations and influencing stakeholders - Collaborative mindset with a positive outlook and effective team-working skills - Passion for innovation and continuous enhancement of design practices Responsibilities: - Stakeholder Engagement: Collaborate closely with key stakeholders to gather requirements, present designs, and ensure alignment with business objectives. - Design Reviews and Iteration: Offer constructive feedback during design reviews to enhance deliverables for quality and usability. - Hands-on Design Work: Utilize advanced Figma skills to create wireframes, prototypes, and high-fidelity designs. - Cross-Team Collaboration: Work in tandem with designers and developers, maintaining a positive and solution-driven approach. - Innovation and Creativity: Develop innovative solutions for challenging design problems while upholding user-centered design principles. - Adaptability and Flexibility: Demonstrate adaptability to changing project requirements and timelines with a proactive attitude. - Communication and Presentation: Deliver compelling presentations of design concepts and explain design rationale effectively to stakeholders. - Design Thinking & Innovation Culture: Contribute to fostering a culture of design and innovation by applying design thinking techniques and promoting discussions on future vision and possibilities. - Ideation and Conceptualization: Utilize design thinking approaches, methodologies, tools, and processes to generate new ideas and concepts. In return, we offer: - A culture of caring that prioritizes inclusivity, acceptance, and belonging - Continuous learning and development opportunities to enhance your skills and advance your career - Engaging and meaningful projects that make an impact for clients worldwide - Balance and flexibility in work arrangements to help you achieve a harmonious work-life integration - A high-trust organization built on integrity and ethical practices About GlobalLogic: GlobalLogic, a Hitachi Group Company, is a leading digital engineering partner to some of the world's most innovative companies. With a focus on creating intelligent products, platforms, and services, we collaborate with clients to transform businesses and redefine industries through digital solutions.,

As an Electrical Engineer at Northern Tool, you will be responsible for performing a variety of electrical engineering activities based on the provided scope of work. This includes owning and maintaining the design, components, and assemblies utilizing Design for Manufacturing and Assembly (DFMA) techniques to minimize product cost through design and process improvements. Your tasks will involve creating specifications, conducting preliminary design reviews, and participating in critical design reviews. Your role will also involve developing the electrical system test requirements and determining the optimal component and wire harness design to ensure overall design, performance, and cost compliance. You will be responsible for identifying the nature and type of CAD models, detail drawings, and analyses needed to support the design process and overseeing their release through the release cycle. In this position, you will be expected to generate concept sketches on paper and create detailed part designs, models, and drawings using Creo software. Additionally, you will lead and participate in design reviews to ensure comprehensive input and involvement from all relevant groups. Your expertise will be crucial in evaluating designs using engineering calculations, material behavior principles, and design analysis tools to ensure Design to Cost (DTC) and Design for Manufacturing (DFM) compliance. Overall, your role as an Electrical Engineer will involve applying design for manufacture principles when developing parts and assemblies to meet the company's objectives and standards.,

As a Mechanical Design Engineer, you will play a crucial role in developing mechanical components and systems for our products. Your responsibilities will include capturing design requirements, researching concept ideas, and utilizing CAD software to create detailed 3D models and 2D drawings. You must ensure that your designs comply with engineering principles, industry standards, and manufacturability guidelines. Your expertise in selecting appropriate materials and manufacturing methodologies will be essential, considering factors like strength, cost, durability, and production feasibility. You will also participate in design reviews to present ideas and discuss alternative solutions, as well as analyze and manage design-related issues to identify root causes. Additionally, you will need to modify designs based on analysis, re-test them until they meet specification requirements, and make necessary changes to existing products. It is crucial to guarantee that your designs align with industry benchmarks, adhere to safety protocols, and meet stringent quality standards. As a part of our team, you will be expected to handle multiple design projects simultaneously, ensuring adherence to project timelines and key milestones. Your strong foundation in mechanical engineering, proficiency in CAD software, and track record of producing innovative design solutions will be valuable assets in this role.,

As a Mechanical Product Designer, your primary responsibility will be to design and enhance mechanical products using Autodesk Inventor while ensuring manufacturability and compliance with industry standards. You will play a crucial role in interpreting customer requirements, estimating project efforts, and tracking schedules. Additionally, you will be involved in analyzing and improving product design drawings and engineering data, as well as identifying opportunities for process enhancements. Collaboration with cross-functional teams and providing regular project updates will be essential aspects of your role. You will be expected to perform design verification, calculations, and GD&T according to ASME Y14.5 standards. Your proficiency in creating detailed drawings and technical documentation will be crucial, along with your expertise in machine design, gear and gearbox selection, bearing housing, fasteners, and industrial product development. A Bachelor's degree in Mechanical or Production Engineering with 6+ years of experience or a Diploma with 14+ years of experience is required for this position. You should possess strong skills in manual calculations for design verification, as well as proficiency in top-down and bottom-up assembly methods. Expertise in SolidWorks for modeling and design work is mandatory, along with familiarity with AutoCAD/Inventor and PLM/PDM systems. Knowledge of industry standards such as EN, DIN, ISO, and ASME compliance is necessary. Soft skills like strong team collaboration, effective customer communication, and active participation in design reviews are also important for success in this role. Desired skills include experience with Evaporators, Plate Heat Exchangers, and Cooling Systems, hands-on experience with Autodesk Inventor, and the ability to introduce automation in 3D modeling and drafting processes. Exposure to North American/European clients and projects, as well as knowledge of additional CAD tools and Quality Management Systems, will be advantageous.,

You will be the design leader responsible for managing and guiding a team of multidisciplinary designers in a rapidly growing tech startup. Your main goal will be to develop the best design team in the industry. Your primary responsibilities will include managing a team of product designers, visual designers, visual communication designers, and researchers. You will collaborate with design leads to oversee various design projects, resolve issues, and ensure that the team delivers high-quality work that aligns with business goals and deadlines. You will play a crucial role in shaping the product direction by participating in ideation, planning, and prioritization of products and features. Your strategic input will be essential in driving design-led projects and expanding existing design systems while building new ones. As a mentor and leader, you will focus on the team's growth by helping them enhance their skills, define career paths, and excel in their roles. Setting high standards for quality, you will ensure that the team delivers top-notch work without compromising speed. Improving the design process will be another key aspect of your role. You will refine design processes, introduce best practices, involve users in decision-making, and establish frameworks to streamline work. Conducting design reviews, facilitating workshops, and prioritizing research will be vital in a fast-paced environment. Key team members you will collaborate with include Harshil Mathur (CEO & Co-Founder), Shashank Kumar (Founder & Managing Director), Ankit Punia (Director of Design), and Saurabh Soni (Head of Design).,

Are you ready to embark on an exciting journey in the world of fashion and e-commerce Namshi, the leading online multi-brand fashion and beauty platform in the Middle East, is looking for talented individuals like you to join our dynamic #NamFam Technology Team, based in India. We are a community built around young people who are making waves in the region, changing the future, and we are right next to them every step of the way. If you are passionate, innovative, and eager to be a part of a company whose mission is to be the region's favorite closet, then Namshi is the place for you. Discover your potential with us and help us redefine the way people shop online and ignite a new generation of personal expression through style. Let's move together! Drive the vision and execution of user-centric design strategy aligned with business goals. Partner with product and engineering leads to define and ship high-impact solutions. Own and evolve the design system and processes to scale design quality across products. Conduct design reviews and provide actionable, constructive feedback. Foster a strong design culture through workshops, critiques, and regular team alignment. Represent the design function in leadership forums and decision-making discussions. 710+ years of design experience, with at least 23 years in a lead or management role. Proven ability to lead design for complex products across mobile/web. Strong portfolio showcasing team-led initiatives, design thinking, and measurable outcomes. Excellent people management skills mentoring, hiring, and performance feedback. Ability to influence stakeholders and balance user needs with business priorities. Familiarity with front-end technologies is a plus. The ideal candidate will be comfortable in a fast-paced, multi-tasked, high-pressure environment with a strong passion for delivering results. A candidate who has a successful history of working in teams solving challenging topics and is willing to roll up their sleeves to get the job done. At Namshi, we have the courage to pursue what seems impossible. We work hard to get things done. We go to great lengths to ensure that the experience is stellar but above all, we are grateful for the opportunities we have. If you feel the above values resonate with you, you will enjoy this incredible journey with us! *Due to the high volume of applications received, please note that only candidates who have been selected for further consideration will be contacted.*,