Job DescriptionDesign (Concept, Outline and Detail Design) of Instrumentation Control Automation based on international standards – for UK region.Good understanding & Working knowledge of various water and wastewater treatment process and related engineering works-Pumping Stations, water treatment works, etc.Supporting global multi-disciplinary teams on Water/Wastewater projects.Prepare Design Basis, P & ID, System/Network Architecture, Control philosophy, PLC GA, Wiring and Schematic Diagrams, I/O list, loop Diagram, Instrument list, and Instrument datasheets.Perform Instrument sizing calculations e.g., Flow Meter.Direct experience with (or direct management of teams using) one or more of the following applications will be considered a plus: AutoCAD, AutoDesk Revit, Plant 3D.Review of vendor drawings for various Instrumentation Control Automation systems.Applies broad practical knowledge to design of Layouts – Equipment Layouts for outdoor/indoor buildings, trench/tray layouts (Should be able to guide/provide inputs to technicians and review from a technical/quality perspective).Coordinate with Designers, Civil Engineers, Electrical Engineers, Mechanical Engineers and Process Engineers and any other external design consultant, if requiredAll other duties as assignedCandidate SpecificationB.Tech/M.Tech in Electrical/Instrumentation Engineering from accredited university. with 7-12 years of experienceRelevant experience in ICA design in a consultancy organisation for Water Sector.Computer literacy in MS office-an understanding of AUTOCAD is essential.Very good written and oral communication skillsSelf-motivated with keen interest to learn new skills and add value to the team/organization Mandatory SkillsInstrumentation, DCS, Field Instrumentation, Transmitters, Level Switch, Temperature Gauge, autocad, Instrumentation Engineering, instrumentation control

We are seeking to recruit an ambitious and dynamic Technical Lead - Intelligent Infrastructure to join the ‘UK iCRC - Intelligent Infrastructure Team to work alongside our UK discipline.We are looking for rounded individuals responsible for planning and managing the delivery of projects, including adequacy of design, compliance with standards and legislation, resource time, cost and quality. The position will report to the Head of the Discipline.Locations:Noida/ Bengaluru/MumbaiMinimum Experience:15 yearsJob Description:People focus: The role has a key responsibility for ensuring the health, safety and welfare of staff. Technical Leader is expected to demonstrate effective & visible leadership across projects, focusing on the ongoing engagement and retention of employees through the development of individuals and building high performing teams technically.Business, operational & commercial management – delivering on business plan & budgetary targets.Commercial governance – project reviews; forecasting and resource management.Divisional Resource Management – iCRC utilisation.Technical governance of the Intelligent Infrastructure team output working with UK technical governance of all deliverables.Key point of contact with the UK business, direct liaison with UK leadership, and promoting the iCRC and ensuring its success.Line Manager – PDRs, promotion, training & mentoring.Staff/Team Development – support, training, nurturing; and.Representing the Intelligent Infrastructure business within the wider Indian Business.Responsibilities:Act as the ‘face’ of the India-based Intelligent Infrastructure team for technical delivery of UK II schemes.Local health and safety, welfare, risk, information security, and assessment/compliance.Promote WSP Vision and Values.Actively promote the UK iCRC culture within the team and ensure that the staff deliver on promises.Manage the team and processes to ensure the preparation and checking of documents, reports and other technical outputs/deliverables from a variety of Intelligent Infrastructure related annual works programmes, meet internal and client requirements and quality assurance standards.Mentoring team members towards professional, technical accreditation or equivalent.Carry out and report on staff appraisals and performance development reviews.Recruitment to achieve budgeted and programmed team growth.Monitor and review team capability in the use of the required standards, processes and software tools and, with technical colleagues, identify training required.Identify opportunities to upskill existing technical resources or recruit new capabilities to deliver additional services or enhance existing ones.Identify further skills that could be brought into the iCRC to deliver additional services or enhancements to various businesses.Ensuring that the Business Management System is implemented and maintained.Seek regular feedback on team performances, ensure criticisms are positively converted into opportunities for improvement.Contribute to the design of operational processes, systems, quality measurement processes and achievement of KPIs.Carry out audits of adherence to WSP Management and Quality processes and implement corrective measures where required.Client/External focus:Maintain strong integration with UK colleagues and contribute to the teams’ performance of client satisfaction.Contribute to knowledge sharing in internal and external forums and including technical input to your team.Remain up to date with market and competitor knowledge across the Intelligent Infrastructure business.People:Inclusively lead people, clearly articulating the vision, defining responsibilities, delegating effectively and providing constructive feedback.Inspire and motivate departmental staff towards technical progression.Be self-motivated to take on a leadership role in project work with a clear focus on timeliness, quality and technical excellence.Managing people through change and develop succession plans.Create and support innovation.Deal with conflict appropriately.Work across cultures (e.g. international and/or multi-disciplinary projects), embracing diverse points of view.Business Focus:Be responsible for the quality of technical outputs to WSP standards including any specific UK client standards.Identify appropriately qualified staff to deliver projects with regard to the constraints of project budgets.Explore ways to add value and improve personal and team performance.Ensure budget utilization is met or exceeded. Key Competencies:You should be able to demonstrate a proven working knowledge of the II sector in terms of UK design standards.Track record of senior technical experience in at least one II, Transport or equivalent discipline.Excellent communication, internal client handling, interpersonal skills and listening skills with the ability to influence and interact with people.Comfortable leading internal engineering discussions and the experience and ability to understand,Open-minded and intellectually agile.A hard-working self-starter with initiative and ability to work within a team environment.Understand own strengths and impact, adapting behavior according to different situations and individuals.Able to work effectively under pressure.Act ethically with fairness, honesty and integrity.You should have demonstrable experience of resource and project management.Experience of liaison with clients, co-professionals and design teams.Excellent written and verbal communication skills.Effective time management and strong organizational skills.Qualifications:Educated to Bachelor / Master’s degree level in a such as Electrical Engineering, Electronics Engineering, Civil Engineering, Transportation Engineering or equivalent.Chartered Engineer status of a recognized professional institution. (e.g. IET).Seasoned professional with at least 15 years’ experience in technical design delivery, project management, project delivery or in leadership in a consulting engineering environment.

Your new role, what's involved? • Sitting in India you will be responsible of delivery of technical process safety related work across a range of sectors including energy transition, chemicals, oil and gas, nuclear, pharmaceuticals, power, food and beverage • The development, implementation and auditing of process safety management systems, including auditing and due diligence assessments. • Supporting team members with process safety risk assessments and studies such as HAZIDs/HAZOPs, QRAs, ALARP demonstrations, COMAH/Offshore Safety Cases & Reports • Working with your colleagues within the Health & Safety team, and the wider business, to establish and deliver marketing and proposal opportunities. • Preparing and submitting thought leadership pieces and blogs to advance our presence in the market. • Identifying new areas of potential work and engagement, to help evolve and expand our capabilities and experience. The role can be offered at different levels depending on candidate's experience. Your Team • You’ll be majorly work with a team of fifteen process safety professionals at various stages of their careers, from recent graduates through to industry experts. And, you will be part of team at India which is more than 100 members strong and working in different aspects of Earth & Environment. • Recent projects we have completed have included: o Process Safety studies for a capacity upgrade to the largest LNG storage and import terminal facility in Europe. o Revalidation HAZOPs for multiple offshore oil and gas installations o Guidance to an offshore oil and gas operator on ALARP standards for reinstatement of process plant o Guidance on refreshing an offshore oil and gas operator’s process safety auditing framework and protocols. o An expert Process Safety audit of an upper tier COMAH site. Mandatory Skills Experience of applying your process safety knowledge within the oil and gas, chemical, nuclear or other high hazard sectors. This could perhaps be within an operating company, as a regulator, project engineer or consultant. • Operational experience of process safety management, including topics such as leadership, culture, competency, asset integrity, permit to work, isolations, and operating procedures. Experience of PSM auditing would be particularly welcome. • Knowledge of applicable UK H& S law. Desirable Skills Environment, consulting, due diligence, analytical skills, safety management, auditing, Risk Identification, Risk Evaluation, Risk Assessment, Hazard Identification Show more Show less

JOB REQUISITES As the Principal Engineer - Instrumentation & Control you will play a crucial role in leading instrumentation and control (I&C) engineering projects within the power and energy sector from conception through execution. You will leverage your expertise to drive the design, development, and implementation of complex control and automation systems, ensuring alignment with industry standards and safety regulations. The ideal candidate will exhibit strong leadership capabilities and foster an environment of innovation and collaboration. Key Responsibilities: Perform complex engineering analyses and prepare advanced deliverables specific to control systems and instrumentation for power generation, transmission, and distribution projects. Conduct control logic design, instrument selection, loop diagrams, and cause-and-effect matrices, ensuring technical accuracy and compliance with project requirements. Design and review system architecture for Distributed Control Systems (DCS), Programmable Logic Controllers (PLC), SCADA, and Human Machine Interfaces (HMI) used in power and energy facilities. Review and evaluate specifications and data sheets for instrumentation and control equipment including transmitters, actuators, analyzers, and control valves. Lead I&C design tasks across all project phases, from feasibility and conceptual design through detailed design, procurement, construction, and commissioning. Perform functional safety analysis and participate in hazard and operability studies (HAZOP) and Layer of Protection Analysis (LOPA) sessions as required. Report to the Lead Engineer or Technical Director, ensuring technical excellence and adherence to project timelines and budgets within the power and energy sector. Ensuring all designs comply with relevant codes, standards and client specifications for energy infrastructure, with particular attention to safety, reliability, and operational efficiency. Collaborate effectively with multidisciplinary teams, to deliver integrated power and energy solutions. Provide mentorship and guidance to junior engineers, facilitating their development in power and energy engineering disciplines. Conduct project feasibility studies, technical risk assessments, and detailed design reviews to support the planning and execution of power and energy projects. Stay updated on industry trends, emerging technologies, and regulatory updates within the power and energy sector, applying insights to enhance design and strategic decisions. Troubleshoot technical issues proactively, delivering timely solutions to maintain project momentum and ensure client satisfaction. Develop and maintain accurate technical documentation, including detailed specifications, engineering drawings, calculations, and comprehensive technical reports relevant to power and energy projects. Interface with clients and stakeholders to effectively communicate project progress, address concerns, and gather technical and operational requirements. Contribute actively to the continuous improvement of engineering processes and methodologies within the organisation, promoting innovation and efficiency in power and energy project delivery. Qualifications: Bachelor’s degree in Instrumentation & Control, Electrical, or Automation Engineering (or a related discipline); A Master’s degree preferred. A minimum of 12 years of experience in instrumentation and control engineering within the power and energy sector, ideally developed within a plant/system design role or professional services/consulting environment. Familiarity with instrument and control systems utilised on gas turbines, combined-cycle (CC), combined heat and power (CHP), waste-to-energy, and renewable energy systems (such as solar, wind, or biomass), including key technologies, components, and full project lifecycle considerations. Knowledge of, or the ambition to learn and develop, expertise in automation systems supporting the energy transition, including grid integration, energy storage systems, and other emerging technologies. Experience with I&C engineering and design tools such as SPI (Intools), AutoCAD, PLC/DCS programming environments (e.g., Siemens, ABB, Schneider, Emerson), and related software would be beneficial. Proficiency in MS Office Experience with project management methodologies and project planning software tools such as, Primavera and MS Project Ability to collaborate and work effectively with cross-functional teams. Show more Show less

Role Summary We are looking for a talented Assistant Project Manager to support and lead the delivery of numerous projects in WSP to provide planning, scheduling, cost control and reporting services support on assigned projects with Project Controls Manager based in Noida/Bengaluru. Responsibilities Contribute and assist to the planning, scheduling, and controlling strategy for assigned projects as guided by PMs/PCM, so that the approach taken in each case is effective and appropriate to the project needs and client requirements including setting standards and procedures, identify warings, prepare relevant project control dashboards for internal and external stakeholder communication. Forecasting and cost to complete reporting to client (using client specified method and processes) and internally using off-line workbooks and online using company applications Assist PMs/PCM with producing the EAC and Report on progress and earned value, to support financial forecasting and any necessary corrective action. Other duties and assignments as required by the Senior Project Controller or Engineering Manager. Lead on supporting the operations and on reporting, bid writing, marketing writing, PowerBI reports, commercial support using .xls and data analytics Contribute to the performance culture, incorporating the WSP values, which develops individuals’ capability through an active performance management process, so that not only delivery for the company is enhanced but also the skills, capability and personal satisfaction of an individual is maximised. Developing KPIs with assistance from the Technical Manager and Principal PM You will ensure that quality procedures are being adhered to through discussion with the lead references and Technical Manager Set up regular internal / external (in collaboration with the Client PM) progress meetings Discuss where efficiencies could be made to give the client 'added value' You will ensure that the project has sufficient resources to meet the demand of the programme Develop a basic working knowledge of the processes to support technical delivery. Key Competencies / Skills Basic project management skills Hands on experience in using Microsoft Project/Primavera P6, Power BI and other Planning and Control software. Understand and has utilised Critical Path Method (CPM), Earned Value (EV) Techniques, and Basic project management skills. Basic knowledge of the philosophies, principals, practices & techniques of planning. Provide reports/metrics including Critical Path, Earned Value, EAC variance, Critical milestones movement, KPIs. Conduct detailed reviews of actual transactions and expenditures. Produce regular cost control reports to support informed decision-making. Significant relevant experience (3 to 5 years) in project planning and controlling. Advance level expertise in using MS Excel/ Word for developing tools and dashboards. Excellent communication skills written and verbal. Experience in working with international planning and project controls teams. Ability to work in a team environment with minimal support. Exposure to UK Highway/Local Government Industry and work experience in Highway projects advantageous. Possess the ability to work to tight deadlines and in changing environments. Qualifications Minimum: Bachelor Degree in Engineering or equivalent project management qualification. Excellent understanding of project management techniques, in addition to effective planning and scheduling skills. Preferable to have relevant domain certifications like CAPM, PFQ etc. Membership of professional organisations like PMI, RICS, APM etc. Experience from the range of 3-5 years. Proficiency in Microsoft Excel. Show more Show less

Job Title CAD Technician - Electrical Job Code 15768 Job Description WSP has a new opportunity for a Senior Electrical Designer to join iCRC Canada’s Energy, Resource & Industry (ERI) team on a full-time basis at our Noida office. An overview of your role will include: Create detail, subassembly, and final assembly drawings of various products from sketches, job sheets, or markups of similar designs as required Co-ordinate and deliver as built drawings for customers Create drawings for permit Perform required drafting changes or create new drawings as required Update engineering design packages and prepare files for distribution as required Maintain and update CAD files, Assist engineers/designers with drafting and development of engineering work packages Design and draft single lines; hazardous area classification; electrical layouts c/w cable tray runs, grounding, cable runs, lighting; wiring schematics; cable/conduit schedules; lighting panel schedules; junction box layouts; control panel layouts; I/O loop drawings; heat trace design; electrical installation details; etc. Managing and organizing drawings including drawing number request, receiving, storing, printing, issuing, etc. Liaising and coordinating closely with internal team members and clients, and working effectively in a multi-disciplinary team environment Plan and organize work All other duties as assigned You will have the following qualifications and attributes: Diploma or Bachelor’s Degree in Electrical/Instrumentation & Control Engineering (or related discipline) CAD Certificate or Diploma from a recognized institution preferred Ten (10) plus years of AutoCAD drafter/operator, in electrical and control system Strong knowledge of AutoCAD, AutoCAD electrical and Autodesk Plant 3D Strong knowledge of 3D Modeling Experience in Autodesk Navisworks Your benefits at WSP will include: Competitive benefits and remuneration packages Deepen your expertise in a dynamic work environment Innovative and collaborative multidisciplinary projects On the job training, mentoring and coaching Global projects and travel opportunities Mandatory Skills Good drafting and development of engineering work packages skills, AutoCAD, AutoCAD electrical and Autodesk Plant 3D Desirable Skills Multi-discipline working environment experience , Excellent verbal and written communication skills in English Maximum Years Of Experience 12 Minimum Years Of Experience 10 Qualification Stream Electrical and Electronics Engineering Qualification (If Other) E&I or Instrumentation and/or control engineering Show more Show less

WSP is looking for a passionate and dynamic team leader for our Nature Services discipline in GCC India. The person would lead a diverse team of professionals and would have following responsibilities: Key point of contact for UK-based business, including direct liaison with Nature Services & Arboriculture business’s directors Commercial management and reporting, workload forecasting and planning of resources for the team Supervising and directing local delivery to support projects and assisting in the professional and technical development of Nature Services colleagues Providing operational and technical leadership in the coordination and successful delivery of our work delivered by ecology iCRC colleauges Ensuring client satisfaction and providing support in the production of outputs, as required Responsibilities Project management, technical leadership and timely delivery of technical outputs from inception to completion with a range of internal UK colleagues including: Act as the ‘ technical face’ of the India-based Ecology team Local health and safety, welfare, risk, information security, and assessment / compliance Project, programme and financial management Represents the interest of team which he/she leads Record of leadership of projects and teams, providing consultancy services at a high level to client. Have proven successful project management record of larger, multiple and/or more complex projects and tasks Possess excellent commercial skills and accountability and drives commercial excellence within their projects and teams Have proven track record of technical oversight and guidance of people, teams, proposals, and projects Proven track record in producing clear and well written bid documents/ reports and communicates professionally and concisely to clients and co-workers Ensures and maintains a high-quality standard of work from all team and project members through robust review and constructive and developmental feedback Understands the challenges and works collaboratively to find, and implement solutions Excellent written and verbal communication skills Promote WSP Vision and Values Actively promote the UK GCC Charter within the team and that the staff deliver on the Charter promises Interfacing with multi-disciplinary project teams Provide highly visible, inspirational leadership and direction for the iCRC Ecology team and ensuring that it is aligned with the wider UK business Identify opportunities to upskill existing technical resources or recruit new capabilities to deliver additional services or enhance existing ones Seek regular feedback on team performances, ensure criticisms are positively converted into opportunities for improvement, lessons learned exercises with appropriate changes implemented Develop / maintain excellent client relationships ensuring repeat business and client satisfaction, internally and externally Contribution to bids and marketing material Contribute to the design of operational processes, systems, quality measurement processes and achievement of performance KPIs Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction Contribute to knowledge sharing in internal and external forums Remain up to date with market and competitor knowledge Business Focus Proactively influences Health and Safety (Safety by Design) Deliver successful commercial performance by clearly understanding and monitoring the area of work and ensure agreed targets are met Be responsible for the quality of technical outputs to WSP standards including any specific UK client standards Identify appropriately qualified staff to deliver projects with regard to the constraints of project budgets Champion and mentor others in use of agreed systems and processes Explore ways to add value and improve personal and team performance Manage opportunities, risks and project changes / variations so that these deliver advantage to the business Ensure budget utilizations is met or exceeded Ensure budgeted earning capacity is met or exceeded Show more Show less

Responsibilities: Assist in preparing and managing project budgets, cost estimates, and progress payment applications. Coordinate and monitor project schedules, ensuring timelines are met and adjusting plans as needed. Track and analyze project progress, prepare status reports, and support cross-functional coordination between design, procurement, and construction teams. Support tendering and bidding processes, including quantity take-offs and cost evaluations. Maintain documentation and ensure accurate records for contracts, change orders, and project correspondences. Requirements: Bachelor’s degree in Civil Engineering, Construction Management, or related fields.. At least 3 years of experience in construction project management, cost control, or a similar role. Proficient in Microsoft Office (especially Excel); experience with project management software is a plus. Strong organizational skills and attention to detail. Ability to work independently and communicate effectively with internal teams and external contractors. Show more Show less

WSP is looking for a passionate and dynamic team leader for our Nature Services discipline in GCC India. The person would lead a diverse team of professionals and would have following responsibilities: Key point of contact for UK-based business, including direct liaison with Nature Services & Arboriculture business’s directors Commercial management and reporting, workload forecasting and planning of resources for the team Supervising and directing local delivery to support projects and assisting in the professional and technical development of Nature Services colleagues Providing operational and technical leadership in the coordination and successful delivery of our work delivered by ecology iCRC colleauges Ensuring client satisfaction and providing support in the production of outputs, as required Responsibilities Project management, technical leadership and timely delivery of technical outputs from inception to completion with a range of internal UK colleagues including: Act as the ‘ technical face’ of the India-based Ecology team Local health and safety, welfare, risk, information security, and assessment / compliance Project, programme and financial management Represents the interest of team which he/she leads Record of leadership of projects and teams, providing consultancy services at a high level to client. Have proven successful project management record of larger, multiple and/or more complex projects and tasks Possess excellent commercial skills and accountability and drives commercial excellence within their projects and teams Have proven track record of technical oversight and guidance of people, teams, proposals, and projects Proven track record in producing clear and well written bid documents/ reports and communicates professionally and concisely to clients and co-workers Ensures and maintains a high-quality standard of work from all team and project members through robust review and constructive and developmental feedback Understands the challenges and works collaboratively to find, and implement solutions Excellent written and verbal communication skills Promote WSP Vision and Values Actively promote the UK GCC Charter within the team and that the staff deliver on the Charter promises Interfacing with multi-disciplinary project teams Provide highly visible, inspirational leadership and direction for the iCRC Ecology team and ensuring that it is aligned with the wider UK business Identify opportunities to upskill existing technical resources or recruit new capabilities to deliver additional services or enhance existing ones Seek regular feedback on team performances, ensure criticisms are positively converted into opportunities for improvement, lessons learned exercises with appropriate changes implemented Develop / maintain excellent client relationships ensuring repeat business and client satisfaction, internally and externally Contribution to bids and marketing material Contribute to the design of operational processes, systems, quality measurement processes and achievement of performance KPIs Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction Contribute to knowledge sharing in internal and external forums Remain up to date with market and competitor knowledge Business Focus Proactively influences Health and Safety (Safety by Design) Deliver successful commercial performance by clearly understanding and monitoring the area of work and ensure agreed targets are met Be responsible for the quality of technical outputs to WSP standards including any specific UK client standards Identify appropriately qualified staff to deliver projects with regard to the constraints of project budgets Champion and mentor others in use of agreed systems and processes Explore ways to add value and improve personal and team performance Manage opportunities, risks and project changes / variations so that these deliver advantage to the business Ensure budget utilizations is met or exceeded Ensure budgeted earning capacity is met or exceeded Show more Show less

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Structures for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of structures in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power plant, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer- structures on mining projects. Prepare foundation, steel, and concrete structure designs in compliance with industry standards. Perform analysis and design using software like Space Gass, STAAD Pro, SACS, Tekla, E3D, or S3D. Solid understanding of Australian Standards (AS) and international codes. Coordinate with other engineering disciplines (piping, mechanical, electrical, instrumentation) for seamless project execution. Prepare civil and structural drawings, specifications, and design calculations. Calculate loads and select structural members based on forces and service demands. Design structural solutions for industrial, commercial, and institutional projects of various sizes with the main focus on industrial projects. Design of shallow and deep foundations, concrete piles, underground concrete vaults and tunnels, and slab reinforcement for a variety of loading conditions. Design of steel structures including building, additions, access platforms including ladder and stair details, trusses, two-legged bents and four-legged support towers. Develop a variety of structural connections including unique connections caused by field interferences. Verify field conditions, constructability of designs, and assist in resolving problems during field construction. Interpreting and designing from a variety of different domestic and foreign structural building design codes. Develop familiarity with WSP standard drawings, specifications, general practices, procedures, Client specific standards. Prepare reports, designs, and drawings. Redline drawings for CAD Designers and review updated submittals for accuracy. Establishing and maintaining effective working relationships with clients, contractors, suppliers and team members. Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English (both written and verbal) communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing or site experience in steel, concrete structure. Ability to work in a fast-paced environment with strict deadlines. Effective leadership capability, coaching and mentoring skills Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in structures engineering. Minimum of a bachelor’s degree in civil & preferred master’s degree in civil/structure engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Electrical for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of Electrical equipments in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power Plant, Chemical process plant, metal & Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer- Electrical on mining projects. Electrical Engineering Experience in basic and detail design and engineering experience in developing of electrical layout, electrical equipment sizing, cable sizing, voltage drop calculation, short circuit calculation, earthing calculation, lighting calculation, design basis report, technical specification, technical bid analysis, preparation of BOQ, cost estimate, vendor drawing and document review including quality plan etc. Experience in design of EHV/HV, MV and LV distribution system, design of electrical system in hazardous and non-hazardous area as per statutory norms, design of electrical outdoor switchyard and substation etc. Sound knowledge of IEEE, IEC and AU codes and standards. Candidate should have experience in design and engineering consultancy on industrial design projects like O & G, Power Plant, Metal & mining sector, semiconductor industry, pharmaceutical, chemical, manufacturing, FMCG, etc. Perform conceptual, basic and detail design, development of layout, design basis report, design of electrical equipment (transformer, switchgear, HV, MV and LV distribution system, substation etc.) and cable sizing, voltage drop calculation, earthing calculation, lighting calculation, relay setting calculation, cathodic protection technical specification, data sheet, technical bid analysis, quantity and cost estimation, review of vendor drawings and documents, quality plans etc. Standard electrical engineering software tools like ETAP etc. Electrical system modelling including grounding, load flow, short-circuit, and arc-flash analysis Protective relay setting development, calculation, and coordination studies. Developing scope of work, conceptual design, and execution plans. Developing equipment specifications, procuring, reviewing vendor drawings and assisting in factory acceptance testing electrical equipment. Reviewing electrical deliverables like one-line diagrams, three-line diagrams, schematics, interconnection drawings, equipment layouts, cable schedules, panel schedules, power, grounding and lighting layouts for constructing/installation of new or modifications of existing power generating facility electrical systems. Provide technical guidance in design optimization, value engineering, design innovation, automation and digital technologies Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Actively participate in the design and provide input to the design team throughout the design process. Ensuring that quality procedures are implemented and maintained. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in Australian lead offices. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing experience of Chutes, Bins, Hoppers, and conveyor components. E.g. trusses Ability to work in a fast-paced environment with strict deadlines. Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in Electrical engineering. Minimum of a bachelor’s degree & preferred master’s degree in electrical engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Electrical for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of Electrical equipments in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power Plant, Chemical process plant, metal & Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer- Electrical on mining projects. Electrical Engineering Experience in basic and detail design and engineering experience in developing of electrical layout, electrical equipment sizing, cable sizing, voltage drop calculation, short circuit calculation, earthing calculation, lighting calculation, design basis report, technical specification, technical bid analysis, preparation of BOQ, cost estimate, vendor drawing and document review including quality plan etc. Experience in design of EHV/HV, MV and LV distribution system, design of electrical system in hazardous and non-hazardous area as per statutory norms, design of electrical outdoor switchyard and substation etc. Sound knowledge of IEEE, IEC and AU codes and standards. Candidate should have experience in design and engineering consultancy on industrial design projects like O & G, Power Plant, Metal & mining sector, semiconductor industry, pharmaceutical, chemical, manufacturing, FMCG, etc. Perform conceptual, basic and detail design, development of layout, design basis report, design of electrical equipment (transformer, switchgear, HV, MV and LV distribution system, substation etc.) and cable sizing, voltage drop calculation, earthing calculation, lighting calculation, relay setting calculation, cathodic protection technical specification, data sheet, technical bid analysis, quantity and cost estimation, review of vendor drawings and documents, quality plans etc. Standard electrical engineering software tools like ETAP etc. Electrical system modelling including grounding, load flow, short-circuit, and arc-flash analysis Protective relay setting development, calculation, and coordination studies. Developing scope of work, conceptual design, and execution plans. Developing equipment specifications, procuring, reviewing vendor drawings and assisting in factory acceptance testing electrical equipment. Reviewing electrical deliverables like one-line diagrams, three-line diagrams, schematics, interconnection drawings, equipment layouts, cable schedules, panel schedules, power, grounding and lighting layouts for constructing/installation of new or modifications of existing power generating facility electrical systems. Provide technical guidance in design optimization, value engineering, design innovation, automation and digital technologies Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Actively participate in the design and provide input to the design team throughout the design process. Ensuring that quality procedures are implemented and maintained. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in Australian lead offices. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing experience of Chutes, Bins, Hoppers, and conveyor components. E.g. trusses Ability to work in a fast-paced environment with strict deadlines. Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in Electrical engineering. Minimum of a bachelor’s degree & preferred master’s degree in electrical engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Structures for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of structures in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power plant, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer- structures on mining projects. Prepare foundation, steel, and concrete structure designs in compliance with industry standards. Perform analysis and design using software like Space Gass, STAAD Pro, SACS, Tekla, E3D, or S3D. Solid understanding of Australian Standards (AS) and international codes. Coordinate with other engineering disciplines (piping, mechanical, electrical, instrumentation) for seamless project execution. Prepare civil and structural drawings, specifications, and design calculations. Calculate loads and select structural members based on forces and service demands. Design structural solutions for industrial, commercial, and institutional projects of various sizes with the main focus on industrial projects. Design of shallow and deep foundations, concrete piles, underground concrete vaults and tunnels, and slab reinforcement for a variety of loading conditions. Design of steel structures including building, additions, access platforms including ladder and stair details, trusses, two-legged bents and four-legged support towers. Develop a variety of structural connections including unique connections caused by field interferences. Verify field conditions, constructability of designs, and assist in resolving problems during field construction. Interpreting and designing from a variety of different domestic and foreign structural building design codes. Develop familiarity with WSP standard drawings, specifications, general practices, procedures, Client specific standards. Prepare reports, designs, and drawings. Redline drawings for CAD Designers and review updated submittals for accuracy. Establishing and maintaining effective working relationships with clients, contractors, suppliers and team members. Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English (both written and verbal) communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing or site experience in steel, concrete structure. Ability to work in a fast-paced environment with strict deadlines. Effective leadership capability, coaching and mentoring skills Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in structures engineering. Minimum of a bachelor’s degree in civil & preferred master’s degree in civil/structure engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Mechanical (Packages) for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of Piping, static & rotary equipment in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer-Mechanical (Packages) on mining projects. In-depth knowledge of piping design codes and standards, such as ASME B31.3, ASME B31.4, and ASME B31.8. Knowledge of process engineering principles and equipment specifications. Understanding of fabrication and construction techniques for piping systems. Knowledge of international codes and standards, mainly ASME VIII div. 1/2, API and TEMA. Design and develop piping systems and components for various, Review detailed piping layout drawings, including isometrics and bill of materials. Collaborate with the project team to ensure compliance with project specifications and industry standards. Engineering & design experience in rotary machinery to provide expert guidance in the selection, specification of rotating equipment like pumps, compressors, and blowers. Responsibilities include reviewing design specifications, vendor management, technical evaluations, and ensuring compliance with industry standards. The ideal candidate will have in-depth knowledge of API standards and rotating equipment lifecycle. Engineering & design experience in Pressure vessels, heat exchangers, tanks, pumps, compressors, blowers, piping system, pipe supports, pipe support structures. steel & RC structures, preparation / review of detailed. Preparation of Pipe wall thickness calculations including external pressure calculation, branch chart calculations and line blanks. Development of project standards, technical specifications for piping materials with minimum supervision. Preparation of Valve Material Specifications, Preparation of datasheets for all piping special items like special valves, strainers, traps, sight glass, bellows, hoses, etc. Preparation of RFQs for piping bulk items, valves, specialty items, etc Carrying out technical evaluation of vendor offers against RFQs for all piping material; preparation of both technical evaluation and commercial comparison; Preparation of technical bid study reports for static, rotary, valves, piping specialties, etc. Assisting in all interfacing, engineering, and construction groups in the area of piping material. Able to resolve all piping material related bottlenecks in project. Extraction and handling Piping MTO for the project. Develop inspection and testing plans (ITPs) for tanks and vessels, including hydrostatic and non-destructive testing (NDT). Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Ensuring that quality procedures are implemented and maintained. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing experience of Chutes, Bins, Hoppers, and conveyor components. E.g. trusses Ability to work in a fast-paced environment with strict deadlines. Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in piping, static, rotary equipment engineering. Minimum of a bachelor’s degree & preferred master’s degree in mechanical engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Mechanical (Packages) for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of Piping, static & rotary equipment in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer-Mechanical (Packages) on mining projects. In-depth knowledge of piping design codes and standards, such as ASME B31.3, ASME B31.4, and ASME B31.8. Knowledge of process engineering principles and equipment specifications. Understanding of fabrication and construction techniques for piping systems. Knowledge of international codes and standards, mainly ASME VIII div. 1/2, API and TEMA. Design and develop piping systems and components for various, Review detailed piping layout drawings, including isometrics and bill of materials. Collaborate with the project team to ensure compliance with project specifications and industry standards. Engineering & design experience in rotary machinery to provide expert guidance in the selection, specification of rotating equipment like pumps, compressors, and blowers. Responsibilities include reviewing design specifications, vendor management, technical evaluations, and ensuring compliance with industry standards. The ideal candidate will have in-depth knowledge of API standards and rotating equipment lifecycle. Engineering & design experience in Pressure vessels, heat exchangers, tanks, pumps, compressors, blowers, piping system, pipe supports, pipe support structures. steel & RC structures, preparation / review of detailed. Preparation of Pipe wall thickness calculations including external pressure calculation, branch chart calculations and line blanks. Development of project standards, technical specifications for piping materials with minimum supervision. Preparation of Valve Material Specifications, Preparation of datasheets for all piping special items like special valves, strainers, traps, sight glass, bellows, hoses, etc. Preparation of RFQs for piping bulk items, valves, specialty items, etc Carrying out technical evaluation of vendor offers against RFQs for all piping material; preparation of both technical evaluation and commercial comparison; Preparation of technical bid study reports for static, rotary, valves, piping specialties, etc. Assisting in all interfacing, engineering, and construction groups in the area of piping material. Able to resolve all piping material related bottlenecks in project. Extraction and handling Piping MTO for the project. Develop inspection and testing plans (ITPs) for tanks and vessels, including hydrostatic and non-destructive testing (NDT). Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Ensuring that quality procedures are implemented and maintained. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing experience of Chutes, Bins, Hoppers, and conveyor components. E.g. trusses Ability to work in a fast-paced environment with strict deadlines. Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in piping, static, rotary equipment engineering. Minimum of a bachelor’s degree & preferred master’s degree in mechanical engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less

Role Summary We are looking for a talented Sr. Consultant - Project Controller to support and lead the delivery of numerous projects in WSP to provide planning, project control, project development, stakeholder management and reporting services on assigned projects with Project Controls Manager/ Principal PM based in Noida/Bengaluru. Responsibilities Contribute to the planning, scheduling, and controlling strategy for assigned projects as guided by PMs/Principal Consultants, so that the approach taken in each case is effective and appropriate to the project needs and client requirements including setting standards and procedures, monitors and reports at project/portfolio level, prepare relevant project control dashboards for internal and external stakeholder communication. Monitor project financials, manage budgets, and implement cost-effective strategies to achieve project objectives. Monitor project risks, issues, resources and CPM and assist in providing solutions to Principal Consultant/Team Leader, complying with WSP and the Client’s standards and codes. Taking ownership for the successful delivery of projects, giving leadership and direction to the team, effectively communicating with all parties. Forecasting and cost to complete reporting to client (using client specified method and processes) and internally using off-line workbooks and online using company applications Assist PMs/PCM with producing the EAC and Report on progress and earned value, to support financial forecasting and any necessary corrective action. Contribute to the performance culture, incorporating the WSP values, which develops individuals’ capability through an active performance management process, so that not only delivery for the company is enhanced but also the skills, capability and personal satisfaction of an individual is maximised. Developing KPIs with assistance from the Technical Manager and Principal PM. Ability to create interactive dashboards using Power Bi as required to support the project reporting. You will ensure that quality procedures are being adhered to through discussion with the lead references and Technical Manager Set up regular internal / external (in collaboration with the Client PM) progress meetings. Engage with and manage relationships with clients, design professionals, contractors, and key trade partners throughout the project lifecycle. Discuss where efficiencies could be made to give the client 'added value' You will ensure that the project has sufficient resources to meet the demand of the programme. Understanding of the processes to support technical delivery. Key Competencies / Skills Experience of project management within medium to high complexity projects. Hands on experience in using Microsoft Project/Primavera P6, Power BI and other Planning and Control software. Experience working either as a client, consultant or contractor, in public and/or private sector environments. Intermediate level knowledge of the philosophies, principals, practices & techniques of planning. Provide reports/metrics including Critical Path, Earned Value, EAC variance, Critical milestones movement, KPIs. Conduct detailed reviews of actual transactions and expenditures. Produce regular cost control reports to support informed decision-making. Significant relevant experience (8 to 10 years) in project management and controlling. Advance level expertise in using MS Excel/ Word for developing tools and dashboards in Power BI. Excellent communication skills written and verbal. Experience in working with international planning and project controls teams. Exposure to UK Highway/Local Government Industry and work experience in Highway projects advantageous. Possess the ability to work to tight deadlines and in changing environments. Qualifications Minimum: Bachelor Degree in Engineering or equivalent project management qualification. Excellent understanding of project management techniques, in addition to effective planning and scheduling skills. Preferable to have relevant domain certifications like PMP, CAPM, PPQ etc. Membership of professional organisations like PMI, RICS, APM etc. Experience from the range of 8-10 years. Advance level proficiency in Microsoft Excel and Power BI. Show more Show less

Role Summary As a Revit Technician - Structures, you will be part of the SGiCRC group within WSP in India. Your role within the Property & Building team will be working on a large variety of fast paced Structural Infrastructure, Detailed design projects, and be able to achieve delivery schedule. Typical tasks would include creation of data-rich BIM models and drawings of Property & Building structures. Role activities would typically involve direct coordination with WSP Singapore Team, design engineers and peer groups across India and Singapore while reporting to Principal Technician & Team lead in India, ensuring that relevant information is available on time for fulfilling lead region’s obligations towards clients. An ideal candidate would be expected to grow over time to be able to undertake both design and BIM tasks simultaneously. Responsibilities Ensure models / drawings accuracy based on BIM standards and BIM project workflow criteria / checklist. Clean up and synchronize models/drawings on a daily basis to the cloud collaboration platform. Ensure all productions are completed on schedule or in a timely manner. Report regularly to Principal Revit Technician / Team Lead on the progress of work. Ensure all exported information are recorded in the correct directory. Implement Quality Control Responsible to participate and support the Company’s SHEQ within their scope of duties. Collaborate and coordinate with other disciplines regarding design-changes and model changes; Adhere to the BEP and BIM project workflow criteria; Follow BIM content standards and development procedures; Setting up of Seed and Model Templates Setting up / creation of shared parameters and families May take the lead on developing some discipline specific model content; Publish drawing sets to the cloud for professional team review and mark-up; Prepare discipline model and/or content for BIM coordination meetings; Export NWC/IFC and other formats for collaboration internally and externally Key Competencies Mandatory Skills Software Proficiencies: Mandatory proficiencies in Revit, AutoCAD, Navisworks, ProjectWise Ability to work collaboratively on a cloud CDE Work independently and/or under minimum supervision Communicate effectively with key design stakeholders Track and manage workflows and delivery timelines Microstation, Civil 3D, Dynamo automation knowledge would be added advantage Experience: 4+ years of hands on experience in BIM Modelling for large scale Property-Building and Infrastructure projects using Revit. Desired Skills Experience of working on overseas (US/UK/SG) projects like Metro, Rail, Stations, Tunnel, Viaduct, Buildings, data centre, Plant buildings. Software Proficiencies: Revit Structures, AutoCAD, Navisworks, etc preferred Relevant Software training certificates including Autodesk Certified Professional in Revit, AutoCAD preferred. Qualifications Degree in Civil Engineering or associated domains in Construction/Design Engineering. Membership of professional organisation preferred. Show more Show less

Role Summary As an Air Quality professional, you will be working closely with Earth, Environment and Ecology teams in WSP India on global projects. The ideal candidate for this role would have experience of working in a range of sectors like Transport, Civil Infrastructure, Water, Properties & Buildings, with a focus on the completion of assessments of air quality impacts from industrial and Infrastructure projects. Experience of completing air quality assessment including dispersion modelling, dust assessment and management, odour assessment and management, monitoring data analysis, and experience with hazardous material data analysis and occupational hygiene, would all be advantageous. You would be expected to have an educational background in Environmental Sciences & Technology with at least, 4+ years of professional experience. Responsibilities Undertake Air Quality assessments by applying appropriate analysis and evaluation, drawing on relevant guidance, international and national policy. Work under supervision of senior staff in specialty domains like air emission rate estimates, stack height determination, detailed dispersion modelling, ambient air quality and meteorological monitoring, meteorological monitoring, odour assessments and dust assessments. . Prepare technical reports (including the analysis and interpretation of model output and monitoring data). Analyse data of hazardous materials, occupational hygiene and prepare IAQ reports pertaining EHS studies. Analyse ecological field data and prepare ecological reports. In General, prepare graphical outputs based on ground investigations and data analysis. Assist with preparing expressions of interest, pre-qualifications, project proposals/bids, fee estimates and project work programmes and budgets. Maintain knowledge of current technical standards, good practice guidance, legislation, codes of practice and New Zealand standards. Ensure assignments are completed on schedule or in a timely manner and within budget. Work in sync with multidisciplinary, cross-cultural and geographically distributed teams; Integrate technical inputs from project peers to deliver the project outcome. Contribute on an on-going basis toward maintaining a safe working environment both for yourself and for those working with you or in your close vicinity; Ensure that confidentiality is respected, and proper work ethics are always maintained. Develop a professional profile with clients and the scientific community generally (including the publishing and/or presentation of papers). Desired Skills Experience in dispersion modelling for air quality assessment Experience in odour assessment Experience in dust management methods Experienced in the use of GIS to produce figures and plots. Familiarity with scripting and a range of digital tools used in data analysis. Proficient in data management skills; Good analytical skills and attention to detail. Ability to work effectively and competently with people at all levels; within and external to the organisation. Client centric, with strong organisational ability to optimise and prioritise conflicting demands in a busy environment, to achieve deadlines and see responsibilities through to completion. Resilient, comfortable with change and ambiguity; Results orientated, with a reputation for, and demonstrated achievement of, key strategic priorities. Ability to work collaboratively and demonstrated capability to perform effectively as part of a team across a matrix type structure. Good interpersonal and communication skills, including oral and written communication and particularly the ability to present ideas, information and advice in a way that is understandable by a range of audiences. Software Proficiencies Demonstrable hands-on proficiencies in a broad range of data analysis tools and dispersion modelling software such as R, Microsoft Excel, ArcMap, AERMOD, CALPUFF , ADMS-Roads and GRAL. Coding skills would be preferred: VBA, Python, SQL, R , etc. Candidate with Scripting skill would have advantaged: HTML/CSS, C++/C#, JavaScript etc. Qualifications MSc or MTech in Environmental Science and Technology or Environmental Engineering with focus on Air Quality. Membership of a relevant international professional body preferred. Experience 4+ years of hands-on professional experience Experience in global consulting organisations preferred Show more Show less

Role Summary As an Air Quality professional, you will be working closely with Earth, Environment and Ecology teams in WSP India on global projects. The ideal candidate for this role would have experience of working in a range of sectors like Transport, Civil Infrastructure, Water, Properties & Buildings, with a focus on the completion of assessments of air quality impacts from industrial and Infrastructure projects. Experience of completing air quality assessment including dispersion modelling, dust assessment and management, odour assessment and management, monitoring data analysis, and experience with hazardous material data analysis and occupational hygiene, would all be advantageous. You would be expected to have an educational background in Environmental Sciences & Technology with at least, 4+ years of professional experience. Responsibilities Undertake Air Quality assessments by applying appropriate analysis and evaluation, drawing on relevant guidance, international and national policy. Work under supervision of senior staff in specialty domains like air emission rate estimates, stack height determination, detailed dispersion modelling, ambient air quality and meteorological monitoring, meteorological monitoring, odour assessments and dust assessments. . Prepare technical reports (including the analysis and interpretation of model output and monitoring data). Analyse data of hazardous materials, occupational hygiene and prepare IAQ reports pertaining EHS studies. Analyse ecological field data and prepare ecological reports. In General, prepare graphical outputs based on ground investigations and data analysis. Assist with preparing expressions of interest, pre-qualifications, project proposals/bids, fee estimates and project work programmes and budgets. Maintain knowledge of current technical standards, good practice guidance, legislation, codes of practice and New Zealand standards. Ensure assignments are completed on schedule or in a timely manner and within budget. Work in sync with multidisciplinary, cross-cultural and geographically distributed teams; Integrate technical inputs from project peers to deliver the project outcome. Contribute on an on-going basis toward maintaining a safe working environment both for yourself and for those working with you or in your close vicinity; Ensure that confidentiality is respected, and proper work ethics are always maintained. Develop a professional profile with clients and the scientific community generally (including the publishing and/or presentation of papers). Desired Skills Experience in dispersion modelling for air quality assessment Experience in odour assessment Experience in dust management methods Experienced in the use of GIS to produce figures and plots. Familiarity with scripting and a range of digital tools used in data analysis. Proficient in data management skills; Good analytical skills and attention to detail. Ability to work effectively and competently with people at all levels; within and external to the organisation. Client centric, with strong organisational ability to optimise and prioritise conflicting demands in a busy environment, to achieve deadlines and see responsibilities through to completion. Resilient, comfortable with change and ambiguity; Results orientated, with a reputation for, and demonstrated achievement of, key strategic priorities. Ability to work collaboratively and demonstrated capability to perform effectively as part of a team across a matrix type structure. Good interpersonal and communication skills, including oral and written communication and particularly the ability to present ideas, information and advice in a way that is understandable by a range of audiences. Software Proficiencies Demonstrable hands-on proficiencies in a broad range of data analysis tools and dispersion modelling software such as R, Microsoft Excel, ArcMap, AERMOD, CALPUFF , ADMS-Roads and GRAL. Coding skills would be preferred: VBA, Python, SQL, R , etc. Candidate with Scripting skill would have advantaged: HTML/CSS, C++/C#, JavaScript etc. Qualifications MSc or MTech in Environmental Science and Technology or Environmental Engineering with focus on Air Quality. Membership of a relevant international professional body preferred. Experience 4+ years of hands-on professional experience Experience in global consulting organisations preferred Show more Show less

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Mechanical (Packages) for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of Piping, static & rotary equipment in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer-Mechanical (Packages) on mining projects. In-depth knowledge of piping design codes and standards, such as ASME B31.3, ASME B31.4, and ASME B31.8. Knowledge of process engineering principles and equipment specifications. Understanding of fabrication and construction techniques for piping systems. Knowledge of international codes and standards, mainly ASME VIII div. 1/2, API and TEMA. Design and develop piping systems and components for various, Review detailed piping layout drawings, including isometrics and bill of materials. Collaborate with the project team to ensure compliance with project specifications and industry standards. Engineering & design experience in rotary machinery to provide expert guidance in the selection, specification of rotating equipment like pumps, compressors, and blowers. Responsibilities include reviewing design specifications, vendor management, technical evaluations, and ensuring compliance with industry standards. The ideal candidate will have in-depth knowledge of API standards and rotating equipment lifecycle. Engineering & design experience in Pressure vessels, heat exchangers, tanks, pumps, compressors, blowers, piping system, pipe supports, pipe support structures. steel & RC structures, preparation / review of detailed. Preparation of Pipe wall thickness calculations including external pressure calculation, branch chart calculations and line blanks. Development of project standards, technical specifications for piping materials with minimum supervision. Preparation of Valve Material Specifications, Preparation of datasheets for all piping special items like special valves, strainers, traps, sight glass, bellows, hoses, etc. Preparation of RFQs for piping bulk items, valves, specialty items, etc Carrying out technical evaluation of vendor offers against RFQs for all piping material; preparation of both technical evaluation and commercial comparison; Preparation of technical bid study reports for static, rotary, valves, piping specialties, etc. Assisting in all interfacing, engineering, and construction groups in the area of piping material. Able to resolve all piping material related bottlenecks in project. Extraction and handling Piping MTO for the project. Develop inspection and testing plans (ITPs) for tanks and vessels, including hydrostatic and non-destructive testing (NDT). Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Ensuring that quality procedures are implemented and maintained. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing experience of Chutes, Bins, Hoppers, and conveyor components. E.g. trusses Ability to work in a fast-paced environment with strict deadlines. Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in piping, static, rotary equipment engineering. Minimum of a bachelor’s degree & preferred master’s degree in mechanical engineering. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less