Responsibilities Lead and manage all phases of Thermal Projects from planning to execution. Develop project plans, including scope, budget, schedule, and resources allocation. Coordinate with internal teams and external stakeholders to ensure project deliverables meet quality standards and timelines. Monitor project progress and address any issues that arise to keep projects on track. Implement risk management strategies to minimize project risks and ensure compliance with regulatory requirements. Provide regular project updates to key stakeholders and senior management. Manage project budgets and financials to achieve project profitability. Mentor and guide project teams to enhance their performance and productivity. Ensure adherence to safety protocols and quality standards throughout project execution. Qualifications BE in Electrical /Mechanical/Civil

Responsibilities System Monitoring and Operations: Monitor Boiler, Turbine, Generator, BOP, and Electrical Systems to ensure optimal performance. Execute start-up and shut-down operations of the plant systems, as required. Maintain close observation of plant parameters and respond promptly to any deviations. Perform routine changeover of equipment and trial of emergency drives. Emergency Response And Equipment Handling Handle plant emergencies related to Boiler-Turbine-Generator (BTG) and coordinate responses. Manage emergencies related to switchyards and grid problems to minimize impact on operations. Ensure safe isolation and normalization of equipment in response to operational needs or emergencies. Perform Flue Gas Desulfurization (FGD) operations and monitor FGD system parameters. Maintain all plant parameter logbooks accurately and up-to-date. Energy Conservation And Environmental Compliance Promote energy conservation in all activities, focusing on Specific Oil Consumption (SOC), Auxiliary Power Consumption (APC), Demineralized (DM) Water usage, and Heat Rate. Monitor critical chemistry parameters to ensure environmental compliance and operational efficiency. Implement and oversee FGD operations to reduce emissions and comply with environmental regulations. Business Sustainability Ensure adherence to IMS, AWMS, DISHA, CHETNA guidelines within the department. Maintain safety of personnel and equipment through proper training and adherence to safety protocols. Adhere to Permit to Work (PTW) systems and Standard Operating Procedures (SOPs). Notify and report defects, problems in the plant to the shift in charge in a timely manner. Digitization And Automation Execute comprehensive digitization strategies to optimize operational efficiency. Implement automation solutions to support overall organizational goals/strategy. Implement process and system improvements, adopting newer technologies and innovative ideas. Qualifications Education Qualification: BE/B.tech in Mechanical or Electrical Engineering or a related field from a recognized institution. Work Experience Minimum of 6+ years of experience in power plant operations with a focus on thermal power plants Preferred Industry Experience in the power generation industry, specifically with thermal power plants, is highly preferred.

About Business JOB DESCRIPTION Adani Group: Adani Group is a diversified organisation in India comprising 10 publicly traded companies. It has created a world-class logistics and utility infrastructure portfolio that has a pan-India presence. Adani Group is headquartered in Ahmedabad, in the state of Gujarat, India. Over the years, Adani Group has positioned itself to be the market leader in its logistics and energy businesses focusing on large-scale infrastructure development in India with O & M practices benchmarked to global standards. With four IG-rated businesses, it is the only Infrastructure Investment Grade issuer in India. Adani Power Limited (APL): Adani Power Limited (APL), a part of the diversified Adani Group, is the largest private thermal power producer in India. We have a power generation capacity of 15,250 MW comprising thermal power plants in Gujarat, Maharashtra, Karnataka, Rajasthan, Chhattisgarh, Madhya Pradesh, and Jharkhand, and a 40 MW solar power project in Gujarat. Job Purpose: This role is responsible to monitor and operate plant systems, including Boiler, Turbine, Generator, BOP, switchyard and transformer area ensuring their optimal performance and executing necessary start-up and shut-down procedures. This role also performs and monitors Flue Gas Desulfurization (FGD) operations, maintaining equipment, promoting energy conservation, and ensuring environmental compliance. Responsibilities Control Room Engineer/Lead Desk Engineer /Lead FGD/ Switchyard Engineer System Monitoring And Operations Monitor Boiler, Turbine, Generator, BOP, and Electrical Systems to ensure optimal performance. Execute start-up and shut-down operations of the plant systems, as required. Maintain close observation of plant parameters and respond promptly to any deviations. Perform routine changeover of equipment and trial of emergency drives. Emergency Response And Equipment Handling Handle plant emergencies related to Boiler-Turbine-Generator (BTG) and coordinate responses. Manage emergencies related to switchyards and grid problems to minimize impact on operations. Ensure safe isolation and normalization of equipment in response to operational needs or emergencies. Perform Flue Gas Desulfurization (FGD) operations and monitor FGD system parameters. Maintain all plant parameter logbooks accurately and up-to-date. Energy Conservation And Environmental Compliance Promote energy conservation in all activities, focusing on Specific Oil Consumption (SOC), Auxiliary Power Consumption (APC), Demineralized (DM) Water usage, and Heat Rate. Monitor critical chemistry parameters to ensure environmental compliance and operational efficiency. Implement and oversee FGD operations to reduce emissions and comply with environmental regulations. Business Sustainability Ensure adherence to IMS, AWMS, DISHA, CHETNA guidelines within the department. Maintain safety of personnel and equipment through proper training and adherence to safety protocols. Adhere to Permit to Work (PTW) systems and Standard Operating Procedures (SOPs). Notify and report defects, problems in the plant to the shift in charge in a timely manner. Digitization And Automation Execute comprehensive digitization strategies to optimize operational efficiency. Implement automation solutions to support overall organizational goals/strategy. Implement process and system improvements, adopting newer technologies and innovative ideas. Key Stakeholders - Internal Maintenance Engineers Key Stakeholders - External NA Qualifications Educational Qualification: BE/B.tech in Mechanical or Electrical Engineering or a related field from a recognized institution. Work Experience (Range Of Years) Minimum of 6+ years of experience in power plant operations with a focus on thermal power plants Preferred Industry Experience in the power generation industry, specifically with thermal power plants, is highly preferred.

Responsibilities Develop and implement comprehensive strategies for engaging with government agencies, regulatory bodies, and other external stakeholders to support the Thermal Power Plant’s operational and strategic objectives. Lead the process of obtaining and managing permits, licenses, and approvals required for the business unit’s projects and operations. Ensure compliance with all applicable environmental regulations and standards, collaborating with internal teams to address any gaps or risks. Build and maintain strong relationships with government officials, bureaucrats, and politicians to facilitate smooth operations and project execution. Monitor and analyze regulatory developments and policy changes, providing strategic insights and recommendations to the leadership team. Represent the Thermal Power Plant business unit in high-level discussions and negotiations with external stakeholders to secure favorable outcomes. Collaborate with internal teams to ensure alignment between regulatory requirements and operational practices. Drive initiatives to enhance the business unit’s reputation and credibility among key stakeholders, including local communities and industry bodies. Provide strategic guidance to the CEO and leadership team on matters related to corporate affairs and regulatory compliance. Lead crisis management efforts related to regulatory or stakeholder issues, ensuring timely and effective resolution. Qualifications Proven track record of 20+ years in corporate affairs, regulatory compliance, or stakeholder engagement within the power or energy sector.

Responsibilities Strategic Project Leadership: Formulate and implement comprehensive project coordination strategies that align with Adani’s corporate vision and sustainable growth objectives. End-to-End Project Management: Oversee all phases of thermal project execution including planning, scheduling, budgeting, procurement, construction, commissioning, and handover, ensuring milestones and deadlines are met with high-quality standards. Cross-Functional Coordination: Facilitate seamless communication and collaboration between engineering, procurement, construction, finance, legal, and quality assurance teams to synchronize efforts and optimize resource utilization. Stakeholder Engagement and Reporting: Establish and maintain robust relationships with key stakeholders, including government authorities, contractors, suppliers, and community representatives. Prepare detailed project reports, progress updates, and presentations for senior management and board reviews. Risk and Issue Management: Identify potential project risks, develop mitigation plans, and proactively address challenges that could impact timelines, costs, or safety. Lead crisis management and resolution activities when necessary. Budgeting and Cost Control: Develop and monitor comprehensive project budgets, ensuring financial discipline and maximizing cost efficiency without compromising quality or safety standards. Compliance and Quality Assurance: Ensure all project activities comply with local and national regulations, environmental guidelines, and Adani’s internal policies. Drive continuous improvement initiatives to enhance quality control processes. Team Leadership and Development: Mentor and develop project teams and emerging leaders, fostering a culture of accountability, continuous learning, and innovation. Promote a safe and inclusive workplace aligned with Adani’s values. Technology and Innovation Integration: Champion the adoption of cutting-edge project management tools and best practices, supporting digital transformation and operational excellence in project coordination. Contract Management: Oversee contract negotiations and administration with vendors and subcontractors ensuring alignment with project goals and risk minimization. Environmental, Health, and Safety (EHS) Leadership: Embed EHS principles into project execution, ensuring zero harm to people and minimal environmental impact throughout the project lifecycle. Qualifications Bachelor’s degree in Mechanical, Electrical, Civil Engineering, or related field from a recognized university. Master’s degree or MBA in Project Management, Business Administration, or relevant discipline preferred. Extensive leadership experience in thermal power project management, preferably 30-40 years, with proven success in handling large-scale industrial projects. Demonstrated ability to lead multidisciplinary teams and manage multiple stakeholders including contractors, vendors, regulatory bodies, and internal departments. Deep understanding of project lifecycle management, from conceptualization and planning to execution, commissioning, and closeout. Proven expertise in risk management, cost control, quality assurance, and compliance with statutory and environmental regulations.

Responsibilities Project Planning and Coordination: Develop detailed project plans, schedules, and resource allocation strategies to meet project milestones and budgets. Construction Management: Oversee civil construction activities including foundations, structural works, earthworks, concrete works, and finishing, ensuring compliance with design specifications and quality standards. Technical Supervision: Provide technical guidance and support to site engineers, contractors, and vendors to resolve design and construction challenges efficiently. Quality Assurance and Control: Implement and monitor rigorous quality control procedures and inspections to maintain the highest standards of workmanship and materials. Safety Management: Ensure strict adherence to health, safety, and environmental policies and procedures, fostering a zero-accident culture on site. Cost Management: Monitor project expenditures and work closely with the finance team to control costs and optimize resource utilization. Compliance and Documentation: Ensure all civil works comply with statutory regulations, environmental guidelines, and Adani’s internal policies; maintain accurate records and documentation for audits and project reviews. Stakeholder Engagement: Liaise effectively with internal teams, external consultants, contractors, and regulatory authorities to ensure smooth project execution and resolution of any issues. Continuous Improvement: Identify process improvement opportunities and implement best practices to enhance efficiency, quality, and safety standards within civil engineering operations. Team Leadership and Development: Mentor and develop junior engineers and technical staff, fostering a collaborative and high-performance work environment consistent with Adani’s culture. Risk Management: Proactively identify potential risks related to civil works and develop mitigation plans to minimize impact on project delivery. Innovative Solutions: Champion the adoption of modern construction technologies and sustainable engineering practices in line with Adani’s vision of building a greener future. Qualifications Bachelor’s degree in Civil Engineering from a recognized university; Master’s degree or equivalent is an added advantage. Exp - 8 to 13 years

Responsibilities Project Planning and Coordination: Develop detailed project plans, schedules, and resource allocation strategies to meet project milestones and budgets. Construction Management: Oversee civil construction activities including foundations, structural works, earthworks, concrete works, and finishing, ensuring compliance with design specifications and quality standards. Technical Supervision: Provide technical guidance and support to site engineers, contractors, and vendors to resolve design and construction challenges efficiently. Quality Assurance and Control: Implement and monitor rigorous quality control procedures and inspections to maintain the highest standards of workmanship and materials. Safety Management: Ensure strict adherence to health, safety, and environmental policies and procedures, fostering a zero-accident culture on site. Cost Management: Monitor project expenditures and work closely with the finance team to control costs and optimize resource utilization. Compliance and Documentation: Ensure all civil works comply with statutory regulations, environmental guidelines, and Adani’s internal policies; maintain accurate records and documentation for audits and project reviews. Stakeholder Engagement: Liaise effectively with internal teams, external consultants, contractors, and regulatory authorities to ensure smooth project execution and resolution of any issues. Continuous Improvement: Identify process improvement opportunities and implement best practices to enhance efficiency, quality, and safety standards within civil engineering operations. Team Leadership and Development: Mentor and develop junior engineers and technical staff, fostering a collaborative and high-performance work environment consistent with Adani’s culture. Risk Management: Proactively identify potential risks related to civil works and develop mitigation plans to minimize impact on project delivery. Innovative Solutions: Champion the adoption of modern construction technologies and sustainable engineering practices in line with Adani’s vision of building a greener future. Qualifications Bachelor’s degree in Civil Engineering from a recognized university; Master’s degree or equivalent is an added advantage. Exp - 8-13 years

Responsibilities Develop and implement quality control procedures for civil engineering activities in Thermal Projects Conduct regular inspections and audits to ensure compliance with regulatory standards Collaborate with project managers and engineers to resolve quality-related issues Review project specifications and blueprints to ensure accuracy Manage and mentor junior quality control staff Participate in design and construction meetings to provide quality engineering input Prepare quality assurance reports and documentation Stay up-to-date on industry best practices and technological advancements in civil engineering quality control Qualifications 4+ years of experience in Civil Engineering Specific experience in the Thermal Projects industry Demonstrated track record of overseeing quality assurance in civil engineering projects

Responsibilities Develop and implement quality control procedures for civil engineering activities in Thermal Projects Conduct regular inspections and audits to ensure compliance with regulatory standards Collaborate with project managers and engineers to resolve quality-related issues Review project specifications and blueprints to ensure accuracy Manage and mentor junior quality control staff Participate in design and construction meetings to provide quality engineering input Prepare quality assurance reports and documentation Stay up-to-date on industry best practices and technological advancements in civil engineering quality control Qualifications 4+ years of experience in Civil Engineering Specific experience in the Thermal Projects industry Demonstrated track record of overseeing quality assurance in civil engineering projects

About Business JOB DESCRIPTION Adani Group: Adani Group is a diversified organisation in India comprising 10 publicly traded companies. It has created a world-class logistics and utility infrastructure portfolio that has a pan-India presence. Adani Group is headquartered in Ahmedabad, in the state of Gujarat, India. Over the years, Adani Group has positioned itself to be the market leader in its logistics and energy businesses focusing on large-scale infrastructure development in India with O & M practices benchmarked to global standards. With four IG-rated businesses, it is the only Infrastructure Investment Grade issuer in India. Adani Power Limited (APL): Adani Power Limited (APL), a part of the diversified Adani Group, is the largest private thermal power producer in India. We have a power generation capacity of 15,250 MW comprising thermal power plants in Gujarat, Maharashtra, Karnataka, Rajasthan, Chhattisgarh, Madhya Pradesh, and Jharkhand, and a 40 MW solar power project in Gujarat. Job Purpose: This role is responsible to monitor and operate plant systems, including Boiler, Turbine, Generator, BOP, switchyard and transformer area ensuring their optimal performance and executing necessary start-up and shut-down procedures. This role also performs and monitors Flue Gas Desulfurization (FGD) operations, maintaining equipment, promoting energy conservation, and ensuring environmental compliance. Responsibilities Control Room Engineer System Monitoring And Operations Monitor Boiler, Turbine, Generator, BOP, and Electrical Systems to ensure optimal performance. Execute start-up and shut-down operations of the plant systems, as required. Maintain close observation of plant parameters and respond promptly to any deviations. Perform routine changeover of equipment and trial of emergency drives. Emergency Response And Equipment Handling Handle plant emergencies related to Boiler-Turbine-Generator (BTG) and coordinate responses. Manage emergencies related to switchyards and grid problems to minimize impact on operations. Ensure safe isolation and normalization of equipment in response to operational needs or emergencies. Perform Flue Gas Desulfurization (FGD) operations and monitor FGD system parameters. Maintain all plant parameter logbooks accurately and up-to-date. Energy Conservation And Environmental Compliance Promote energy conservation in all activities, focusing on Specific Oil Consumption (SOC), Auxiliary Power Consumption (APC), Demineralized (DM) Water usage, and Heat Rate. Monitor critical chemistry parameters to ensure environmental compliance and operational efficiency. Implement and oversee FGD operations to reduce emissions and comply with environmental regulations. Business Sustainability Ensure adherence to IMS, AWMS, DISHA, CHETNA guidelines within the department. Maintain safety of personnel and equipment through proper training and adherence to safety protocols. Adhere to Permit to Work (PTW) systems and Standard Operating Procedures (SOPs). Notify and report defects, problems in the plant to the shift in charge in a timely manner. Digitization And Automation Execute comprehensive digitization strategies to optimize operational efficiency. Implement automation solutions to support overall organizational goals/strategy. Implement process and system improvements, adopting newer technologies and innovative ideas. Key Stakeholders - Internal Maintenance Engineers Key Stakeholders - External NA Qualifications Educational Qualification: BE/B.tech in Mechanical or Electrical Engineering or a related field from a recognized institution. Work Experience (Range Of Years) Minimum of 3+ years of experience in power plant operations with a focus on thermal power plants Preferred Industry Experience in the power generation industry, specifically with thermal power plants, is highly preferred.

About Business JOB DESCRIPTION Adani Group: Adani Group is a diversified organisation in India comprising 10 publicly traded companies. It has created a world-class logistics and utility infrastructure portfolio that has a pan-India presence. Adani Group is headquartered in Ahmedabad, in the state of Gujarat, India. Over the years, Adani Group has positioned itself to be the market leader in its logistics and energy businesses focusing on large-scale infrastructure development in India with O & M practices benchmarked to global standards. With four IG-rated businesses, it is the only Infrastructure Investment Grade issuer in India. Adani Power Limited (APL): Adani Power Limited (APL), a part of the diversified Adani Group, is the largest private thermal power producer in India. We have a power generation capacity of 15,250 MW comprising thermal power plants in Gujarat, Maharashtra, Karnataka, Rajasthan, Chhattisgarh, Madhya Pradesh, and Jharkhand, and a 40 MW solar power project in Gujarat. Job Purpose: This role is responsible for execution, and quality control of civil maintenance activities within the power company. Reporting to the Head of Maintenance Civil, this role ensures the optimal use of resources, adherence to safety and compliance standards, and the integration of digitization and automation to enhance operational efficiency. The incumbent drives innovation and sustainability initiatives, while maintaining infrastructure integrity and fostering a culture of continuous improvement and zero harm. Responsibilities Lead - Civil Maintenance Operational Planning And Resource Management Develop and implement weekly and daily work plans according to the approved L-3 level schedule for civil structures. Optimize resource utilization, including manpower, materials, and equipment, to meet project deadlines and objectives. Resolve issues promptly and escalate complex challenges to the Head of Civil Maintenance, as needed. Manage the process of raising purchase requisitions (PRs), reservations, and bill processing in SAP, ensuring efficient procurement and material usage. Ensure permits (PTW) are raised in SAP and timely approvals are obtained. Conduct reconciliation of free issue materials and maintain accurate inventory management to prevent non-moving inventory (NMI) issues. Resolve and close defects notification in SAP. Coordinate with business associates and ensure maintenance of roads, pipelines, and other infrastructure for long-term durability and functionality. Provide inputs for budget planning, aligning financial resources with departmental objectives and sustainability goals. Provide inputs for Training need identification and facilitate feedback sessions. Perform investigation in case of incidents or near-miss related to civil. Quality Control And Project Execution Prepare bills of quantities (BoQ) and coordinate with head of department for approval for civil works, ensuring accuracy and compliance with project specifications. Certify measurements and process contractor bills, maintaining transparency and accountability in financial transactions. Ensure all civil modifications and new constructions adhere to technical specifications and are documented using AutoCAD. Coordinate with the Head of Civil Maintenance for the approval of BoQs and ensure proper implementation of modifications and new construction. Maintain comprehensive records of drawings, safety documents, and joint measurement certifications (JMR). Ensure third party inspection of safety equipment are done in a timely manner and healthiness certifications of equipment are obtained. Raise NFA (Note for Approval) for any civil modifications on the system and follow up for approvals. Ensure implementation of actionables and adherance to standards based on technical audit observations. Business Sustainability Implement and follow IMS, AWMS, DISHA, CHETNA guidelines, and other safety protocols within the department. Participate in safety audits and drives, contributing to the development and implementation of safety protocols. Record and monitor safety observations for the assigned area, ensuring compliance with safety standards. Ensure the safety of personnel including business associates and equipment through proper training and adherence to safety protocols. Oversee the maintenance of roads, pipelines, and corrosion mitigation of other infrastructure to ensure long-term durability and functionality. Address compliance to technical audits, safety audits, and business excellence assessments, ensuring continuous improvement. Ensure zero harm in the workplace and promote a culture of safety and excellence. Digitization And Automation Support comprehensive digitization strategies to optimise operational efficiency. Innovate and implement automation solutions to support overall organisational goals / strategy. Key Stakeholders - Internal Operations Techno Commercial Safety Security External Stakeholders Key Stakeholders - External: Contractors Suppliers Agencies & Consultants for testing Qualifications Educational Qualification: Bachelor's degree/B.Tech in Civil Engineering is required Work Experience (Range Of Years) 7+ years of experience in civil maintenance, with a focus on structural integrity and corrosion mitigation. Preferred Industry Experience in the power plant industry or similar industrial settings with exposure to large-scale infrastructure maintenance is preferred.

About Business JOB DESCRIPTION Adani Group: Adani Group is a diversified organisation in India comprising 10 publicly traded companies. It has created a world-class logistics and utility infrastructure portfolio that has a pan-India presence. Adani Group is headquartered in Ahmedabad, in the state of Gujarat, India. Over the years, Adani Group has positioned itself to be the market leader in its logistics and energy businesses focusing on large-scale infrastructure development in India with O & M practices benchmarked to global standards. With four IG-rated businesses, it is the only Infrastructure Investment Grade issuer in India. Adani Power Limited (APL): Adani Power Limited (APL), a part of the diversified Adani Group, is the largest private thermal power producer in India. We have a power generation capacity of 15,250 MW comprising thermal power plants in Gujarat, Maharashtra, Karnataka, Rajasthan, Chhattisgarh, Madhya Pradesh, and Jharkhand, and a 40 MW solar power project in Gujarat. Job Purpose: This role is responsible for strategic oversight and direction of all electrical maintenance activities for critical power generation components such as Boiler, Turbine and Generator. This role champions safety, sustainability, and compliance while driving innovation in Digitalisation and automation to enhance operational efficiency. As a leader, this role fosters a culture of continuous improvement and team engagement, ensuring the development of personnel and the integration of advanced technologies for business excellence. Responsibilities Section Head - Electrical (Boiler, Turbine and Generator) Strategic Planning And Oversight Provide strategic direction and guidance for the electrical maintenance of Boiler, Turbine and Generator. Ensure strategic and tactical plans in conjunction with peers for the Boiler, Turbine, Generator and associated areas. Provide technical direction to the team for efficient and reliable maintenance of BTG. Review and ensure implementation of process/system improvements for BTG, including excitation systems, generator auxiliary systems, HT/LT switchgears, HT and LT motors, and more. Ensure proactive planning and execution of systems to prevent future problems, such as SOPs, JSAs, and SMPs. Ensure implementation of improvement projects for Boiler, Turbine, Generator, and associated areas. Participate in cross-site and technical audits to maintain high standards of operational excellence. Operational Excellence Monitor and ensure the timely closure of notifications on SAP. Oversee system improvement through innovative ideas and best practices. Ensure availability of all BTG equipment such as excitation system, generator auxiliary systems, HT and LT switchgears, HT and LT motors, DC Motors, DC and battery systems, lighting system, earthing system, ESP, Elevators, DG sets, VFD, EOT Crane and Hoist. Ensure communication of change/improvements in company policies within the department. Ensure timely completion of PM, CM, and condition monitoring. Monitor testing parameters to ensure they are within permissible limits and suggest corrective actions. Oversee planning, scheduling and execution of shutdowns, annual overhauling, and maintenance projects. Perform RCA, MoC, FMEA, ZFO, and ensure timely technical audits including ISO, IWMS, 5S, etc. to maintain high operational standards. Budget And Inventory Management Review and finalize the annual budget for BTG maintenance and improvement projects. Manage spares inventory and develop vital indigenous spares for BTG-related systems such as generator, excitation system, switchgears, motors, etc.. Monitor business associates and ensure bill certifications with focus on cost-effectiveness. Approve purchase requests (PRs) raised by Leads based on the delegation of authority. Oversee the financial aspects of annual overhauling planning and execution. Identify cost-saving opportunities and implement measures to reduce operational expenses. Business Sustainability Ensure adherence to IMS, AWMS, DISHA, ABEM and CHETNA guidelines within the department. Maintain safety of personnel and equipment through proper training and adherence to safety protocols. Mitigate hazardous processes and ensure participation in mock drills. Ensure compliance with legal and statutory requirements, including electrical license renewal and certifications for elevators. Digitalisation And Automation Review newer technology and adopt them to enhance operational efficiency. Lead and execute comprehensive Digitalisation strategies to optimize operational efficiency. Innovate and implement automation solutions to support overall organizational goals/strategy. Identify system upgradation opportunities and oversee system improvements through innovative ideas and best practices. Oversee the testing of electrical equipment for BTG and associated areas. People And Team Engagement Participate/Assist in the recruitment process to attract and retain skilled personnel. Drive and enhance employee engagement across the team, including business associates to sustain a positive workplace culture. Lead, inspire, and mentor the team to foster a high-performance culture and ensure cross-skilling through job rotation, technical, and behavioural training. Ensure proper succession planning in the team. Foster a conducive environment for high employee retention by ensuring team satisfaction and professional development. Key Stakeholders - Internal All Departments Head Office ENDORSE Service Departments Techno Commercial Key Stakeholders - External Govt Agencies Vendors Contractors - Material and services Qualifications Educational Qualification: BE/B.tech in Electrical Engineering or a related field is required; a Master's degree is preferred. Work Experience (Range Of Years) 18+ years of experience in electrical maintenance within power generation or a related heavy industry. Preferred Industry Experience in the power sector, specifically with expertise in the maintenance of Boiler, Turbine, and Generator (BTG) equipment, is highly desirable.

Responsibilities Carrying audit for unsafe conditions of U#1 to 5 Rotary parts and Mills area Carrying out job specific training of work which is being carried out and carrying out SI on schedule basis. Preparing PPTs and keeping records of the audit observations. Taking precautions, issuing permits and safely carrying out work at height, confined space and high risk areas and attending Health & Safety meetings and maintaining housekeeping Implementation of CAPA and Review of JSA-RA Penalty to colleagues and contractor workers as per OHS requirements Provide vision and leadership in collaboration with the Station Manager and management team to station personnel to help achieve the goals and objectives of the business unit. Provide strategic direction and guidance to the Boiler Rotary parts and Mills maintenance team to facilitate maintenance in a safe, efficient and cost effective manner Initiate and manage innovative plant maintenance standards required to remain competitive. Provide input to long term maintenance plans based on predictive & preventive maintenance principles. Cross-train the maintenance employees to handle diverse functions. Maintain 5’S, IMS & SMS Develop a team-based working environment and cultivate a corporate culture dedicated to continuous improvement. Establish, Develop and maintain positive working relationships with employees, to satisfy internal and external customers of the station. Provide budget inputs and control cost to maintain yearly budgets Interface with other departments in supporting plant PLF, Heat Rate, and other important goals. Ensure to maintain optimum inventory level Boiler Rotary parts and Mills equipment while keeping balance between inventory value and availability of critical spares. Ensure continual improvement in equipment and system performance related with Boiler Rotary parts and Mills. Get work done through service provider & certifications. Quality parameter’s to be achieved through best maintenance practices. Penalty as per OHS requirements. Qualifications Essential Qualification: B.E / B.Tech (Mechanical) Desired Qualification: M.E / M Tech (Mech.), MBA, IMS - Lead Auditor Experience Total : 12-15 Yrs

About Business JOB DESCRIPTION Adani Group: Adani Group is a diversified organisation in India comprising 10 publicly traded companies. It has created a world-class logistics and utility infrastructure portfolio that has a pan-India presence. Adani Group is headquartered in Ahmedabad, in the state of Gujarat, India. Over the years, Adani Group has positioned itself to be the market leader in its logistics and energy businesses focusing on large-scale infrastructure development in India with O & M practices benchmarked to global standards. With four IG-rated businesses, it is the only Infrastructure Investment Grade issuer in India. Adani Power Limited (APL): Adani Power Limited (APL), a part of the diversified Adani Group, is the largest private thermal power producer in India. We have a power generation capacity of 15,250 MW comprising thermal power plants in Gujarat, Maharashtra, Karnataka, Rajasthan, Chhattisgarh, Madhya Pradesh, and Jharkhand, and a 40 MW solar power project in Gujarat. Job Purpose: This role involves managing resources and operations for Boiler Rotary equipment, including timely notifications for equipment availability, spare parts issuance, and execution of annual and capital overhauls within budget and manpower constraints. Additionally, this role encompasses reporting and documentation responsibilities such as preparing RCA, FMEA, ZFO reports, maintaining equipment history records, verifying attendance and quantities, raising purchase requests, and drafting Standard Maintenance Procedures for review. Responsibilities Lead - Mechanical Boiler (Rotary) Resource And Operational Management Timely execution of notifications to ensure availability of Boiler Rotary equipment, issue spares from stores and ensure availability at the site. Execute AOH (Annual Overhaul) and COH (Capital Overhaul) within budgets and allotted manpower. Provide inputs for Budget preparation for Boiler Rotary equipment. Maintain cleanliness and housekeeping of the boiler area. Support Team Lead in Quality Check and review material and equipment procurement. Support in skill development of Technicians and business associates. Reporting And Documentation Prepare reports as per inputs from Team Leads/Section Heads for RCA (Root Cause Analysis), FMEA (Failure Modes and Effects Analysis), ZFO (Zero Failure Operations), and Technical audits. Maintain history records of all equipment in the boiler area. Support Team Leads/Section Heads for attendance and quantity verification. Raise PRs as directed and approved by Team Leads. Prepare AOH, COH reports, as directed by Team Leads and Section Head. Preparation of draft SMPs for the area and send Team Leads for review. Business Sustainability Implement and Follow IMS, AWMS, DISHA and CHETNA guidelines within the department. Monitor and ensure safety of contract personnel and equipment through proper training and adherence to safety protocols. Ensure compliance of notifications (predictive, preventive & corrective). Participate in structural training and audits for the boiler area, conduct L2 and L3 trainings for all contractors and update in KRONOS. Execute and send confirmation for safety compliances as per GENSUITE. Digitization And Automation Support comprehensive digitization strategies to optimise operational efficiency. Implement automation solutions to support overall organisational goals / strategy. Key Stakeholders - Internal Operations & Maintenance Stores Support Functions Key Stakeholders - External Contractors Qualifications Educational Qualification: B.tech/BE in Mechanical Engineering or equivalent degree related field from a recognized institution. Work Experience (Range Of Years) 7+ years of experience in power plant maintenance, with at least 5 years in a supervisory or managerial role overseeing boiler rotary equipment. Preferred Industry Experience in the thermal power generation industry, specifically with expertise in the operation and maintenance of coal-fired power plants.

About Business JOB DESCRIPTION Adani Group: Adani Group is a diversified organisation in India comprising 10 publicly traded companies. It has created a world-class logistics and utility infrastructure portfolio that has a pan-India presence. Adani Group is headquartered in Ahmedabad, in the state of Gujarat, India. Over the years, Adani Group has positioned itself to be the market leader in its logistics and energy businesses focusing on large-scale infrastructure development in India with O & M practices benchmarked to global standards. With four IG-rated businesses, it is the only Infrastructure Investment Grade issuer in India. Adani Power Limited (APL): Adani Power Limited (APL), a part of the diversified Adani Group, is the largest private thermal power producer in India. We have a power generation capacity of 15,250 MW comprising thermal power plants in Gujarat, Maharashtra, Karnataka, Rajasthan, Chhattisgarh, Madhya Pradesh, and Jharkhand, and a 40 MW solar power project in Gujarat. Job Purpose: This role is responsible to ensure the efficient and reliable operation of the Switchyard and Power Transformer areas through meticulous execution of maintenance activities. This role is pivotal in upholding safety, environmental compliance, and sustainability standards while driving process improvements and innovation. The Lead Electrical Switchyard is responsible for coordinating with stakeholders and embracing Digitalisation and automation to enhance operational effectiveness. Responsibilities Lead - Electrical Switchyard & Transformer Maintenance Execution And Reliability Execute electrical maintenance activities for the Switchyard, Power Transformer Area, and associated areas to ensure continuous operational reliability. Implement comprehensive maintenance strategies, including preventive, predictive, and corrective maintenance, to minimize downtime and extend equipment life. Conduct annual (AOH) and comprehensive (COH) overhauling and manage maintenance during outages, focusing on safe, timely, and efficient project completion within budgets and allotted manpower. Engage in repairing and refurbishment activities for associated area equipment, ensuring that all maintenance work is carried out to the highest standards. Monitor the condition and availability of all switchyard equipment, ensuring that circuit breakers, transformers, isolators, and earthing systems are functioning optimally. Troubleshoot equipment failures and conduct equipment failure analysis to prevent recurrence and improve system reliability. Create PRs for materials and services and prepare SES (Service Entry Sheets) for completed services. Process Improvement And Innovation Identify and act on opportunities for process and system enhancements to meet evolving operational needs and directives from leadership. Regularly update Standard Operating Procedures (SOPs), Job Safety Analyses (JSAs), and Standard Maintenance Plans (SMPs) to reflect current best practices and operational requirements. Ensure the effective use of SAP for tracking maintenance activities, managing spare parts inventory, and ensuring the timely closure of notifications. Provide accurate and timely information for Necessary Formal Approvals (NFAs) for license renewals and contribute to the preparation of comprehensive reports for RCA, FMEA, ZFO, and technical audits. Implement actionable as per Root Cause Analysis (RCA), Management of Change (MoC), Failure Mode and Effects Analysis (FMEA), and Zero Forced Outage (ZFO) reports to prevent incidents and improve safety outcomes. Maintenance Standards And Specifications Provide information/support for communications with the govt. agencies such as SLDC, WRLDC, ALDC, NRLDC and other regulatory authorities for scheduled outages. Support Team Leads in quality assurance processes, ensuring that materials and equipment procured meet specified standards and contribute to operational excellence. Allocate work areas to business associates efficiently, ensuring optimal use of resources and adherence to maintenance schedules. Assist Team Leads with attendance and quantity verification to ensure accurate record-keeping and accountability. Prepare detailed reports for Annual Overhaul (AOH) and Capital Overhaul (COH), as directed by Team Leads and Section Heads, to document maintenance activities and outcomes. Support Team Leads in the execution of performance metrics and the preparation of requirements for equipment and services for budget preparation. Provide training and development requirements to Team Leads for development of business associates. Business Sustainability Implement and Follow IMS, AWMS, DISHA, ABEM, CHETNA guidelines, and other environmental and safety protocols to ensure a sustainable and safe workplace. Participate in and ensure the effectiveness of mock drills, hazard mitigation processes, and emergency response procedures. Maintain compliance with all legal and statutory requirements, including timely renewal of electrical licenses and certifications. Conduct safety trainings for all business associates and employees, ensuring a high level of safety awareness and competence across the department. Maintain meticulous records of all equipment histories, ensuring that any issues are documented and learnings are applied to future operations. Digitalisation And Automation Support comprehensive Digitalisation strategies to optimise operational efficiency. Innovate and implement automation solutions to support overall organisational goals / strategy. Key Stakeholders - Internal All Departments Service Departments External Stakeholders Key Stakeholders - External: Contractors - Material and services Qualifications Educational Qualification: BE/B.tech in Electrical Engineering or a related field from an accredited institution. Work Experience (Range Of Years) 11+ years of experience in electrical maintenance within power distribution. Preferred Industry Experience in the power generation, transmission, or distribution industry, with a focus on switchyard operations and maintenance.

Responsibilities Prepare PR for material procurements. Perform inspections to access equipment condition. Educate the workmen and Contract engineers by providing training. Scheduling & planning of various types of maintenance. Monitor contractors and direct them to perform work. Maintenance in compliance with SAP based notification and work order. Analyze cause of poor performance of equipment and take action accordingly. Conducting internal audits for unsafe conditions of boiler area. Conducting job specific training of work which is being carried out and carrying out Health & Safety Interactions on schedule basis. Ensure PTW & LOTO system is followed for every activity to be carried out in Boiler area for ensuring Health & Safety in accordance with all the Health & Safety guidelines. Audit / Health & Safety observation compliances and keeping records of the audit observations. Working proactively for safely carrying out work at height, confined space and high risk areas and conducting Health & Safety meetings and maintaining housekeeping. Review of JSA-RA –Job Health & Safety analysis & Risk assessment. Qualifications Essential Qualification: B.E / B.Tech (Mechanical) Desired Qualification: M.E / M.Tech (Mechanical) Experience: minimum 10 years in Boiler

Responsibilities Develop and implement quality control procedures for civil engineering activities in Thermal Projects Conduct regular inspections and audits to ensure compliance with regulatory standards Collaborate with project managers and engineers to resolve quality-related issues Review project specifications and blueprints to ensure accuracy Manage and mentor junior quality control staff Participate in design and construction meetings to provide quality engineering input Prepare quality assurance reports and documentation Stay up-to-date on industry best practices and technological advancements in civil engineering quality control Qualifications 4+ years of experience in Civil Engineering

About Business JOB DESCRIPTION Adani Group: Adani Group is a diversified organisation in India comprising 10 publicly traded companies. It has created a world-class logistics and utility infrastructure portfolio that has a pan-India presence. Adani Group is headquartered in Ahmedabad, in the state of Gujarat, India. Over the years, Adani Group has positioned itself to be the market leader in its logistics and energy businesses focusing on large-scale infrastructure development in India with O & M practices benchmarked to global standards. With four IG-rated businesses, it is the only Infrastructure Investment Grade issuer in India. Adani Power Limited (APL): Adani Power Limited (APL), a part of the diversified Adani Group, is the largest private thermal power producer in India. We have a power generation capacity of 15,250 MW comprising thermal power plants in Gujarat, Maharashtra, Karnataka, Rajasthan, Chhattisgarh, Madhya Pradesh, and Jharkhand, and a 40 MW solar power project in Gujarat. Job Purpose: This role is responsible to manage the optimal performance and reliability of Control & Instrumentation (C&I) systems for BTG (Boiler, Turbine, Generator) through vigilant maintenance, calibration, and troubleshooting. This includes managing the healthiness of C&I parameters, providing rapid response to emergencies, and maintaining equipment such as Motor Operated Valves (MOVs) and Flue Gas Discharge (FGD) systems. Responsibilities Shift Engineer Operational Excellence Ensure the availability and functionality of all C&I systems related to BTG and BOP during the respective shift. Attend routine maintenance of BTG Motor Operated Valves (MOVs) and auxiliaries. Execute calibrations as per schedule and prepare detailed reports. Maintain the healthiness of C&I parameters in coordination with Operations, including bypassing interlocks and protections, as required. Maintain and provide DCS historian data for analysis and other purposes. Manage timely startup of the unit to meet operational demands and maintain power generation schedules. Provide immediate and effective response to emergencies to safeguard personnel and equipment while minimizing operational disruptions during the assigned shift. Maintenance And Troubleshooting Troubleshoot breakdowns of equipment promptly to minimize downtime. Follow the checklist for equipment maintenance and ensure timely execution. Provide resources and guidance to contractor technicians for routine maintenance tasks. Maintain Flue Gas Discharge (FGD) systems to ensure operational efficiency. Coordinate with other departments to minimize delays in maintenance and operational activities. Provide timely information to Team Leads for issue escalations to higher-ups. Business Sustainability Implement and Follow IMS, AWMS, DISHA and CHETNA guidelines within the department. Implement field related ZFO action items and AWMS for continuous improvement in maintenance practices. Report unsafe conditions, acts, and near misses in the work area to promote a culture of safety. Ensure compliance with safety audit observations and follow the CHETNA process diligently, particularly during startups and routine operations. Ensure zero accidents through proper training and adherence to safety protocols. Follow guidelines of work permit systems and ensure compliance where applicable. Monitor compliance with environmental regulations, particularly in relation to FGD systems. Ensure adherence to statutory compliances and regulations. Implement MoC (Management of Change) protocols to ensure safe and compliant modifications to equipment and processes. Digitization And Automation Execute comprehensive digitization strategies and automation solutions to optimize operational efficiency. Implement process and system improvements, adopting newer technologies and innovative ideas. Utilize advanced technology to streamline maintenance and operational processes. Key Stakeholders - Internal Safety Operations & Maintenance Stores Key Stakeholders - External NA Qualifications Educational Qualification: Bachelor's degree in C&I or Electronics & Communication or equivalent degree. Work Experience (Range Of Years) 6+ years of experience in power plant operations or maintenance, with specific exposure to BTG (Boiler, Turbine, Generator) and C&I (Control & Instrumentation) systems. Preferred Industry Experience in the power generation industry, particularly in thermal power plants with knowledge of DCS, FGD systems, and safety protocols.

Responsibilities Core Procurement Purchase Requisition (PR) Review ► Assist in the review of approved PR from user department; seek additional information if required from user for correctness & completeness of PR ► Provide support in identifying the type and method of procurement (depending on type of material/ services to be procured, nature of PR (normal vs. emergency PR), stocks available, availability of rate contract, value, delivery timeline etc.) Strategic Sourcing for Capex, Opex, Bulk Material & Services Contribute to the strategic sourcing process by participating in activities such as: ► Selection of bidding process, preparation of vendor selection approach and vendor evaluation criteria depending on the nature of the category ► Preparing the request for information (RFI) document for bidder evaluation ► Identification of potential bidders who meet the requirements (using Company vendor database, Supply market analysis, advertisement or recommendations from other teams) ► Preparation of the Request for Proposal (RFP) document ► Organizing and planning pre-bid meeting based on the queries and communication requirements from vendors ► Technical and Commercial bid evaluation of vendors ► Conducting fact-based negotiations/e-auction with shortlisted bidders ► Preparation of Note for Approval (NFA) for selected bidder (vendor) and obtaining required approvals as per DoA Contract Preparation and Order Placement ► Prepare contract document as per stated protocols & standard templates ► Set up the approved contract record within the ERP system, using the appropriate system steps and functionality ► Maintain the contract document for future reference as per defined document management policy ► Send the contract to vendor and all identified stakeholders ► Collate the Advance Bank Guarantee/ Contract Performance Bank Guarantee (ABG/ CPBG)/ Customs related documents from vendor as per requirements Procurement Through Rate Contracts ► Based on approved NFA, prepare, review and issue rate contracts ► Prepare master outline agreement (OA) in ERP system based on rate contract ► Prepare PO / SO for procurement under valid rate contract Associated Procurement Activities Post Order Management ► Prepare Billing Break Up and get it uploaded in SAP, if applicable ► Expediting of ordered materials for timely delivery ► Address, resolve or re-allocate and share response for queries raised by vendors or from other internal stakeholders, during expediting delivery ► Prepare Change Order/ Amendments in the order including quantity/ Rate variation, Extra items, Time Extensions etc. ► Facilitate closure of contracts and take necessary actions ► Manage inbound logistics services for other Ex-Works Domestic Supplies ► Execute contingency plans in case of immediate business requirements Supplier Management Supplier/ Vendor Identification and Onboarding ► Coordinate with new identified vendors to send information/ documents in predefined forms for evaluation ► Prepare vendor evaluation criteria for the category in consultation with quality, engineering and project management & control departments ► Check details of forms submitted by vendor for their completeness and validity of documents ► Interact and take approval of Quality/ User/HSE department for vendor assessment if Required ► If the vendor is qualified based on the vendor evaluation criteria, update approved vendor list & communicate to vendor ► Populate required data and documents into MDG/Ariba system to get vendor code created in SAP Supplier/ Vendor Performance Management Contribute to performance evaluation, management and development planning of suppliers/ vendors for assigned category by partaking in activities such as: ► Preparation of vendor segmentation matrix based on annual spend with the vendor and risks associated ► Preparation of vendor performance evaluation criteria and frequency of evaluation for each vendor segment ► Assigning performance levels to vendors, review of vendor scorecard, and checking if the performance is meeting desired level ► In case of satisfactory performance, communicating performance feedback to vendors highlighting improvement opportunities on individual parameters ► In case of unacceptable performance, communicating performance to vendor & planning discussions to identify actions required for performance improvement Supplier/ Vendor Engagement ► Establish strategic partnerships with suppliers/ vendors of assigned category which will benefit Adani from a long-term perspective and effectively leverage them for value additions to business Data management Data Analytics ► Assist in collation and analysis of data related to various procurement activities (e.g. commodity analysis, supplier debugging, etc.) for respective categories ► Identify and seek opportunities to improve efficiency and value by analysing data ► Contribute to action planning and implementation based on data analytics performed for assigned categories Qualifications More than 4 years of experience in supply chain management, procurement and related area.

Responsibilities Develop and implement quality control procedures for civil engineering activities in Thermal Projects Conduct regular inspections and audits to ensure compliance with regulatory standards Collaborate with project managers and engineers to resolve quality-related issues Review project specifications and blueprints to ensure accuracy Manage and mentor junior quality control staff Participate in design and construction meetings to provide quality engineering input Prepare quality assurance reports and documentation Stay up-to-date on industry best practices and technological advancements in civil engineering quality control Qualifications 4+ years of experience in Civil Engineering Specific experience in the Thermal Projects industry Demonstrated track record of overseeing quality assurance in civil engineering projects