23 Automotive Lighting Jobs

FORVIA HELLA is a listed international automotive supplier. As a company of the FORVIA Group, FORVIA HELLA stands for high-performance lighting technology and vehicle electronics and, with the Lifecycle Solutions Business Group, also covers a broad service and product portfolio for the spare parts and workshop business as well as for manufacturers of special vehicles. With currently around 36,500 employees at over 125 locations, the Company is active worldwide and generated adjusted sales of 8.1 billion in fiscal year 2024. Leads the Product Development Team according to the Product V-Model approach, Steers the technical content-based communication with the customer Represents the product development within the project core team, develops technical basis for project management / core team decisions in consideration of QCT&R /Analysis & alignment of Product Conformity (legal), safety, customer and HELLA requirements Develop System Requirements Specification /Product System Architecture Design /System Integration Planning Characteristics-oriented systems development, assuring: (Product Conformity,Product Safety in Product Development Agreed Customer and HELLA requirements) / Leading the DFMEA activities Technical Reviews & Product Release /Product Design Verification + Validation incl. DfM/DfA-loops with our plants and suppliers up to full PPAP YOUR QUALIFICATIONS Electrical engineering degree / Master of Science / Graduate in Mechanical engineering / Automobile / Electronics. 8 to 10 years of experience (or even above ) in automotive product development, with experience of working as a technical lead. Knowledge and experience on system engineering is an add on. Automotive lighting knowledge is an advantage.

Roles Responsibilities: Automotive Lighting Design and development Engineer - Gurgaon Location Handling of Automotive lighting project throughout design life cycle, sourcing, manufacturing, regulatory compliance, interface, application, testing Change management. Manage Design and development of automotive exterior lighting components, including headlamps, tail lamps, and signal lamps with Halogen and LED technology. Collaborate with cross-functional teams including styling, manufacturing, purchasing, and quality to ensure seamless integration of lighting components into vehicle design. Oversee the validation and testing of lighting components to ensure they meet all performance, safety, regulatory, and company standards. Analyse and resolve engineering Quality issues related to exterior lighting, using basic problem-solving techniques and tools (5W1H, 5WWHY, FTA , DFMEA, DRBFM) Prepare technical documentation, including design specifications, validation plans, and test reports. Ability to prepare project schedule and manage project timelines, Ability to prepare and manage budgets related to lamp engineering activities. Ability to analyse and interpret technical data and reports shared by vendors. Should be able to evaluate supplier proposals and provide technical recommendations Functional Competencies Hands On Experience on Design development in any project from the Exterior Lighting domain. Experience with CAD software for design and engineering (e.g., CATIA, UGNX). Strong knowledge of industry standards and regulations related to automotive lighting. Working knowledge of Automotive lighting design life cycle, manufacturing and process, regulatory requirements, interface, application, testing and integration, DFMEA Change management. Stay updated with the latest advancements in halogen and LED lighting technology, as well as emerging technologies in the automotive lighting industry. Ability to negotiate with Suppliers on Technical implementation, Costs Schedule Information Classification- Confidential monitoring. Experience in Value engineering and weight reduction is an added advantage

Mindtree Limited is looking for Senior Specialist - Service Design to join our dynamic team and embark on a rewarding career journey Using various strategies and tools to provide effective solutions to customers' concerns. Communicating with clients, engineers, and other technicians to ensure that services are delivered effectively. Monitoring inventory and reordering materials when needed. Conducting research and attending workshops to remain abreast of industry developments. Writing reports and presenting findings to Managers and Supervisors on a regular basis. Good to Have Skills : Banking, Application Development & Maintainance, Consultative Selling, Proposal Response

Job Title: Optical & Thermal Simulation Engineer SPEOS & FloEFD Industry: Automotive Location: Noida, Sector 127, Motherson Corporate Tower Experience Required: 4-12 Years Education: B.E./B.Tech or M.E./M.Tech in Mechanical, Optical Engineering, Physics, or related field Key Skills: Ansys SPEOS, Simcenter FloEFD, Optical Simulation, Thermal Simulation, Automotive Lighting, Thermal Analysis, Optical Design Job Description: We are looking for a skilled Optical & Thermal Simulation Engineer with hands-on experience in Ansys SPEOS and Simcenter FloEFD to support end-to-end simulation, design, and validation of automotive optical systems , including lighting, sensors, and displays. Key Responsibilities: Perform optical simulations using Ansys SPEOS for lighting performance, photometry, and stray light analysis Conduct thermal simulations using Simcenter FloEFD to evaluate heat dissipation, material impact, and deformation Optimize illumination systems (light guides, lenses, reflectors, diffusers) Collaborate with multi-disciplinary teams to integrate designs Validate simulation results with experimental data Create technical reports and documentation Required Skills & Tools: Strong expertise in Ansys SPEOS and Simcenter FloEFD Solid understanding of optical design , light propagation, and thermal managemen Knowledge of additional tools like Ansys Mechanical, Fluent, or COMSOL is an advantage Excellent analytical, communication, and documentation skills Preferred Experience: Automotive lighting, LiDAR, AR/VR system design Experimental validation of simulation results Understanding of industry standards and compliance Why Join Us? Work on cutting-edge simulation projects in the automotive sector, collaborate with industry experts, and contribute to innovative product development. Apply Now to be part of a fast-growing, tech-driven team!

Role & responsibilities We are looking for a highly skilled Illumination Designer with hands-on experience in street and faade lighting projects. The candidate must be proficient in 3D modeling, visualizations, lighting simulations, walk-throughs, and high-quality renderings . A thorough understanding of lighting products, techniques, and DIALux for simulations is essential. Ability to generate BOQs based on renders and technical understanding is required. A flair for commercials and costing will be highly appreciated. Preferred candidate profile 27 years of experience in a lighting design company Proficient in AutoCAD, SketchUp, Lumion, 3Ds Max, Photoshop, Illustrator Video editing knowledge preferred Strong grasp of public/architectural lighting principles

JOB DESCRIPTION Job Title Lead Electronics Engineer (LEE) Lighting Electronics Location Pune Reporting to Team leader - LEE Direct Reportees No Creation Date EDUCATION / QUALIFICATION - Bachelor or Master degree in Electronics Engineering or equivalent qualification in a similar field EXPERIENCE - More than 5 years ADDITIONAL KNOWLEDGE - PURPOSE AND NATURE - Lighting Electronics Product Design (for Head Lamp, Tail Lamp, Fog Lamp etc) in automotive applications using CATIA, Altium Designer, Autocad in close coordination with PD team. ROLES & RESPONSIBILITES - The LEE is part of a development team for head lamps, rear lamps and control modules and is reporting directly to the Team leader LEE Function. She/he will be responsible for handling different activities during the project lifecycle. Handling the activities such as preparation and maintaining the time plan, preparing the RFQs, releasing the data in RTC, interacting with customer for different deliverables etc. Guiding hardware engineer for proof of concept and by helping them in WCCA. Interacting with cross functional teams (Optics, CAE or Program management) to meet timelines and deliverables. During the product development all internal process requirements and activities like design reviews and releases need to be followed and supported. It may be requested to present the design internally and to our customer. Performance of product benchmarks. Support of pre-development activities. SKILLS - Good electronics knowledge Basic knowledge of LED specific technologies and LED drivers (linear, DC/DC converters) Sound knowledge of PCB technologies and PCB assembly manufacturing process as per automotive requirements Good knowledge of EMI/EMC specifications Readiness to continuing education and follow up on latest technology trends in the lighting business Awareness of cost-efficient designs Good English language and communication skills Willingness to work in an international environment Ideally you bring some knowledge of electronics engineering in the automotive environment and have experience with the following software tools Altium Designer Spice simulation (PSPICE, OrCAD, LTspice, ) IBM Rational Team Concert Microsoft Office package and Windows MS Project Project and effort estimation EMS (PCBA) Supplier manufacturing acknowledge Role & responsibilities Preferred candidate profile

Job Title: Pixel LED Technology Manager Experience: 6-10 Years Location: Hyderabad Languages Preferred: English, Hindi, Telugu Industry: Events, Entertainment, Amusement Parks, Installations Job Summary: We are seeking a technically strong and experienced Pixel LED Technology Manager to lead the execution, management, and maintenance of pixel LED systems at our site in Hyderabad. The ideal candidate will bring in-depth expertise in programmable lighting, LED control software, and large-scale visual setups for events and themed environments. Key Responsibilities: Oversee installation, programming, and maintenance of pixel LED lighting and display systems. Use software such as Madrix , ArKaos , or similar platforms for pixel mapping and control. Manage wiring, power distribution, and integration with DMX/Artnet protocols. Collaborate with designers to bring creative lighting concepts to life. Lead a team of technicians and coordinate with vendors and suppliers. Ensure safety and compliance in all electrical installations. Perform troubleshooting and system diagnostics for optimal performance. Keep inventory records and ensure availability of required components. Research emerging LED technologies and suggest upgrades. Requirements: 610 years of experience in pixel LED installations and lighting control systems. Strong hands-on knowledge of DMX , Artnet , and programmable LED setups. Proven experience in high-traffic environments such as parks, events, or stage shows. Diploma/Degree in Electrical, Electronics, or a related technical field preferred. Excellent leadership and project management skills. Ability to work flexible hours, including nights or weekends for live setups. Strong communication in English, Hindi, and Telugu. Perks & Benefits: Competitive salary based on experience Career advancement in innovative, large-scale projects Food and accommodation provided on-site (if applicable) Work with a passionate and skilled technical team Apply Now: hr@experium.in

Job Title: Pixel LED Technician Experience: 2-5 Years Location: Hyderabad (On-site) Languages Preferred: English, Hindi, Telugu Industry: Events, Entertainment, Installations, Amusement Parks Job Summary: We are looking for a hands-on and detail-oriented Pixel LED Technician to assist in the setup, wiring, testing, and maintenance of pixel LED lighting systems. The ideal candidate should have working knowledge of DMX/Artnet protocols and LED control systems used in decorative and interactive lighting installations. Key Responsibilities: Assist in installation, connection, and programming of pixel LED lighting setups. Work with controllers such as Madrix , T1000S , or K8000 , and other LED software/hardware platforms. Perform soldering, power supply management, and cable routing. Troubleshoot pixel LED wiring issues and repair faults on-site. Ensure safety and efficiency during live installations. Coordinate with the design and electrical teams to implement lighting layouts. Maintain and manage lighting system components and inventory. Support during shows, events, or high-traffic periods for smooth operations. Requirements: 25 years of experience in pixel LED or stage/event lighting setups. Familiar with RGB LED strips, DMX/Artnet protocols, and LED controllers. Basic electrical knowledge and experience with power tools. Ability to read wiring diagrams and layout schematics. Strong troubleshooting and problem-solving abilities. Willingness to work flexible hours and on weekends as needed. Good communication in English, Hindi, and Telugu. Benefits: Competitive Salary Food & Accommodation (if applicable) On-the-job training and certification opportunities Work on high-profile lighting projects in entertainment and leisure industry Apply Now: hr@experium.in

Preparation of Part Costing with respect to BOM, Drawings & CAD. Molding Process; Mold Flow ; Tool design Knowledge . Coordinate with the R&D team to freeze drawings & manufacturing process requirements for the required Components Prepare the RMC basis the finalized BOM and submit the same for costing approval from RFQ Tracking and Monitoring of RFQ (Includes status of Business award wrt to total RFQ receipt and its Revenue) Preparation of Part and Tool supplier source list with respect to LTS and inviting quotations from suppliers. Submission of 3~4 supplier quotations to SCM for cost negotiation. Do the Part/ Process feasibility with suppliers and closure with R&D to release controlled drawings for development activities. Post feasibility & drawing revision/modification wrt actual part dimensions & fitment trial report for catering mass production needs. Developing critical parts through Proto route to prove design concept after that start development. Preparation of MD/capex for approval and enable further PR and PO activities Tool Kick off meetings with suppliers after agreement on DFM with R&D and suppliers. Detailed Study tool design and part simulation report to cross check for any process defects Preparing & updating Documents regularly, related to projects like Tool development Plan, weekly report & video conferencing for suppliers. Follow up with Project Leaders on weekly activities regarding Projects. Tracking tool development activities wrt to Time plan and review with supplier once in week. Preparing plastic raw materials sheet to tooling suppliers & arranging the RM with proper tacking. Trial Plan & attending trials at suppliers end arranging Inspection reports and parts from Suppliers. Coordinating between tooling suppliers and QA / Project leaders to fulfill quality requirements After T1 to TF trials in VEL QA sharing feedbacks with Suppliers for tool modification and maturations. If tool modification, perform all design changes on the same tool with change cost settlement with suppliers. Discuss with R&D for any deviation, do fitment trial, and disposal of the report. After getting final go-ahead from VEL QA / PM / Customer, arranging molds dispatch to production &Ensuring Tool GRN activity with plant. Planning trials in plants/ in presence of tooling suppliers till parts / tool quality approve by plant / QA team. Coordinate with finance for tool payment clearance after receipt of approval. Material stock local BOP 3days & Imported 2 Week Inventory. Execution of PPAP activity along with NPD quality at supplier end. Conduct pre PPAP audit to check suppliers’ readiness on jigs, fixtures, measuring gauges & machine availability Ensuring closure of PPAP audit points with supplier for SOP readiness. Coordinating with Quality team for PSW signoff, to enable to raise for open PO. Skills & Expertise: 1.Zero Based Cost. 2.PPAP Documentation and Verification. 3.SAP MM Module 4. WH, Sheet Metal, forging, casting and moulding knowledge. 5. Handling and managing the vendors 6. CAD Tools: UG NX & CATIA 7. Costing knowledge 8. Automotive Lighting knowledge 9. APQP; PPAP; PLM Role & responsibilities Preferred candidate profile Perks and benefits

Hands on experience on CATIA or SOLIDWORKS Experience on Plastic, Interior Trims (Lighting Preferred) Automotive Industry On Permanent Roll

5 years of experience in Automotive Lighting Electronics domain. Good Communication Presentation skills. Front/Rear/Interior Lighting Electronics design and calculations. Project Co-ordination, Timeline Cost management. Knowledge of various communication Protocols such as, K Line, CAN, IIC,SCI, SPI, etc Hardware simulations, Thermal Management. Knowledge about Microcontroller such as Freescale, Renesas, Microchip, Infineon, etc. Understanding of HW design Software such as Orcad, Eagle, Autodesk, PSpice configuration and version management. eBOM, Cost estimation. Sys Plan (wire harness routing) Connectors. EMI/EMC. Basic knowledge in Functional safety, ISO26262 Compatible Design, Software Development process. Basic Knowledge about ASPICE compliance s/w development. BCM parametrization from Lamp functionality requirement perspective. Light/Rain sensor parametrization. Advance Forward lighting System (AFS) Electronics parametrization. Component level testing, Environmental, EMC Testing, Mechanical testing, etc. Vehicle level testing from Lamp system integration perspective. Hardware In Loop (HIL ) test to simulate vehicle conditions. Knowledge about Volkswagen Vehicle Electrical System Development Process (VOBES) is an added advantage. #LI-DNI

About The Role Preparation of Part Costing with respect to BOM, Drawings & CAD. Molding Process; Mold Flow ; Tool design Knowledge . Coordinate with the R&D team to freeze drawings & manufacturing process requirements for the required Components Prepare the RMC basis the finalized BOM and submit the same for costing approval from RFQ Tracking and Monitoring of RFQ (Includes status of Business award wrt to total RFQ receipt and its Revenue) Preparation of Part and Tool supplier source list with respect to LTS and inviting quotations from suppliers. Submission of 3~4 supplier quotations to SCM for cost negotiation. Do the Part/ Process feasibility with suppliers and closure with R&D to release controlled drawings for development activities. Post feasibility & drawing revision/modification wrt actual part dimensions & fitment trial report for catering mass production needs. Developing critical parts through Proto route to prove design concept after that start development. Preparation of MD/capex for approval and enable further PR and PO activities Tool Kick off meetings with suppliers after agreement on DFM with R&D and suppliers. Detailed Study tool design and part simulation report to cross check for any process defects Preparing & updating Documents regularly, related to projects like Tool development Plan, weekly report & video conferencing for suppliers. Follow up with Project Leaders on weekly activities regarding Projects. Tracking tool development activities wrt to Time plan and review with supplier once in week. Preparing plastic raw materials sheet to tooling suppliers & arranging the RM with proper tacking. Trial Plan & attending trials at suppliers end arranging Inspection reports and parts from Suppliers. Coordinating between tooling suppliers and QA / Project leaders to fulfill quality requirements After T1 to TF trials in VEL QA sharing feedbacks with Suppliers for tool modification and maturations. If tool modification, perform all design changes on the same tool with change cost settlement with suppliers. Discuss with R&D for any deviation, do fitment trial, and disposal of the report. After getting final go-ahead from VEL QA / PM / Customer, arranging molds dispatch to production &Ensuring Tool GRN activity with plant. Planning trials in plants/ in presence of tooling suppliers till parts / tool quality approve by plant / QA team. Coordinate with finance for tool payment clearance after receipt of approval. Material stock local BOP 3days & Imported 2 Week Inventory. Execution of PPAP activity along with NPD quality at supplier end. Conduct pre PPAP audit to check suppliers readiness on jigs, fixtures, measuring gauges & machine availability Ensuring closure of PPAP audit points with supplier for SOP readiness. Coordinating with Quality team for PSW signoff, to enable to raise for open PO. Job Requirement 1.Zero Based Cost. 2.PPAP Documentation and Verification. 3.SAP MM Module 4. WH, Sheet Metal, forging, casting and moulding knowledge. 5. Handling and managing the vendors 6. CAD ToolsUG NX & CATIA 7. Costing knowledge 8. Automotive Lighting knowledge 9. APQP; PPAP; PLM

About The Role Preparation of Part Costing with respect to BOM, Drawings & CAD. Coordinate with the R&D team to freeze drawings & manufacturing process requirements for the required Components Prepare the RMC basis the finalized BOM and submit the same for costing approval from RFQ Tracking and Monitoring of RFQ (Includes status of Business award wrt to total RFQ receipt and its Revenue) Preparation of Part and Tool supplier source list with respect to LTS and inviting quotations from suppliers. Submission of 3~4 supplier quotations to SCM for cost negotiation. Do the Part/ Process feasibility with suppliers and closure with R&D to release controlled drawings for development activities. Post feasibility & drawing revision/modification wrt actual part dimensions & fitment trial report for catering mass production needs. Developing critical parts through Proto route to prove design concept after that start development. Preparation of MD/capex for approval and enable further PR and PO activities Tool Kick off meetings with suppliers after agreement on DFM with R&D and suppliers. Detailed Study tool design and part simulation report to cross check for any process defects Preparing & updating Documents regularly, related to projects like Tool development Plan, weekly report & video conferencing for suppliers. Follow up with Project Leaders on weekly activities regarding Projects. Tracking tool development activities wrt to Time plan and review with supplier once in week. Preparing plastic raw materials sheet to tooling suppliers & arranging the RM with proper tacking. Trial Plan & attending trials at suppliers end arranging Inspection reports and parts from Suppliers. Coordinating between tooling suppliers and QA / Project leaders to fulfill quality requirements. After T1 to TF trials in VEL QA sharing feedbacks with Suppliers for tool modification and maturations. If tool modification, perform all design changes on the same tool with change cost settlement with suppliers. Discuss with R&D for any deviation, do fitment trial, and disposal of the report. After getting final go-ahead from VEL QA / PM / Customer, arranging molds dispatch to production &Ensuring Tool GRN activity with plant. Planning trials in plants/ in presence of tooling suppliers till parts / tool quality approve by plant / QA team. Coordinate with finance for tool payment clearance after receipt of approval. Material stock local BOP 3days & Imported 2 Week Inventory. Execution of PPAP activity along with NPD quality at supplier end. Conduct pre PPAP audit to check suppliers readiness on jigs, fixtures, measuring gauges & machine availability Ensuring closure of PPAP audit points with supplier for SOP readiness. Coordinating with Quality team for PSW signoff, to enable to raise for open PO. Job Requirement Zero Based Cost. PPAP Documentation and Verification. SAP MM Module WH,Sheet Metal,forging,casting and Moulding knowledge. Handling and managing the vendors. Automotive Lighting knowledge APQP; PPAP; PLM CAD ToolsUG NX & CATIA Costing knowledge

Preparation of Part Costing with respect to BOM, Drawings & CAD. Coordinate with the R&D team to freeze drawings & manufacturing process requirements for the required Components Prepare the RMC basis the finalized BOM and submit the same for costing approval from RFQ Tracking and Monitoring of RFQ (Includes status of Business award wrt to total RFQ receipt and its Revenue) Preparation of Part and Tool supplier source list with respect to LTS and inviting quotations from suppliers. Submission of 3~4 supplier quotations to SCM for cost negotiation. Do the Part/ Process feasibility with suppliers and closure with R&D to release controlled drawings for development activities. Post feasibility & drawing revision/modification wrt actual part dimensions & fitment trial report for catering mass production needs. Developing critical parts through Proto route to prove design concept after that start development. Preparation of MD/capex for approval and enable further PR and PO activities Tool Kick off meetings with suppliers after agreement on DFM with R&D and suppliers. Detailed Study tool design and part simulation report to cross check for any process defects Preparing & updating Documents regularly, related to projects like Tool development Plan, weekly report & video conferencing for suppliers. Follow up with Project Leaders on weekly activities regarding Projects. Tracking tool development activities wrt to Time plan and review with supplier once in week. Preparing plastic raw materials sheet to tooling suppliers & arranging the RM with proper tacking. Trial Plan & attending trials at suppliers end arranging Inspection reports and parts from Suppliers. Coordinating between tooling suppliers and QA / Project leaders to fulfill quality requirements. After T1 to TF trials in VEL QA sharing feedbacks with Suppliers for tool modification and maturations. If tool modification, perform all design changes on the same tool with change cost settlement with suppliers. Discuss with R&D for any deviation, do fitment trial, and disposal of the report. After getting final go-ahead from VEL QA / PM / Customer, arranging molds dispatch to production &Ensuring Tool GRN activity with plant Planning trials in plants/ in presence of tooling suppliers till parts / tool quality approve by plant / QA team. Coordinate with finance for tool payment clearance after receipt of approval. Material stock local BOP 3days & Imported 2 Week Inventory. Execution of PPAP activity along with NPD quality at supplier end. Conduct pre PPAP audit to check suppliers readiness on jigs, fixtures, measuring gauges & machine availability. Ensuring closure of PPAP audit points with supplier for SOP readiness. Coordinating with Quality team for PSW signoff, to enable to raise for open PO Job Requirement SKILLS AND KNOWLEDGE REQUIRED: 1. Automotive Lighting knowledge 2. APQP;PPAP;PLM 3. SAP, MS office 3. CAD Tools: UG NX & CATIA BE / B. Tech with 10+yrs of Experience

Job Overview: Electrica Engineers Pvt Ltd is seeking an experienced Senior Manager to lead the Quality Department . A strong background in the Automotive Lighting industry and Quality Management Systems is required. The ideal candidate will improve Quality Assurance policies , Develop Product and Process Guidelines , and ensure Operational Efficiency . Key responsibilities include managing Customer complaints , handling Audits , driving Continuous Improvement , and maintaining Compliance with Industry standards . Key Responsibilities : Process and Product Quality Management: Collaborate with relevant departments (Engineering, Manufacturing, Supply Chain, etc.) to establish and maintain quality standards for both processes and products. Define acceptable quality metrics aligned with customer requirements, focusing on key performance indicators (KPIs) like PPM and defect rates. Quality Result Indicators Accountability: Achieve and monitor quality targets such as customer PPM, zero repetitive quality concerns, and eliminate customer line stoppages due to quality issues. Regularly report on quality performance and implement corrective actions as necessary. Compliance with IATF16949 Quality Management System: Ensure adherence to the IATF16949 standard, providing support for audits and maintaining system documentation to guarantee compliance. Customer Complaint Management: Analyze and resolve customer complaints using the 8D methodology, ensuring effective communication with customers and follow-through on corrective actions. PPAP Documentation: Prepare and review necessary documentation for the Production Part Approval Process (PPAP), Including Layout Reports, SPC, MSA, and Checking Aids, ensuring Customer and Regulatory Compliance. Rejection Data Analysis: Collect and analyze monthly rejection data, using quality tools (e.g., Pareto analysis, Fishbone diagrams) to identify process failures and implement corrective measures. Scorecard Performance Analysis: Perform detailed cause analysis of scorecard results, develop action plans, and implement corrective measures to improve performance and meet quality targets. Regulatory Compliance (Customer Standards): Ensure compliance with customer-specific standards and regulatory requirements such as IMDS, ROHS, ELV, REACH, Thermal Cycle, Identification Marking, and Flammability. Warranty Data and Trend Analysis: Analyze warranty data to identify new potential issues, follow up on 3MIS, and collaborate with cross-functional teams to address root causes. Use of Quality Tools: Utilize advanced quality management tools and techniques such as SPC, PPAP, Control Plans, FMEA, Poka-Yoke, 7 QC Tools, MSA, and others to monitor and improve quality performance. Desired Qualifications : Education: Bachelor's degree in Engineering, specializing in Electronics & Telecommunications (E&TC), Mechanical Engineering, or a related field. Experience: Minimum of 14 -20 years of experience in the Automotive or related Engineering Industry. Proven experience handling Original Equipment Manufacturers (OEMs) such as TATA Motors , SAVW , Mahindra & Mahindra (M&M) , Bajaj Auto , Piaggio , Nissan , Stellantis , or similar. Experience in Automotive Lighting is preferred. Key Skills : Analytical Skills: Strong ability to analyze data, perform root cause analysis, and resolve quality issues. Problem-Solving: Ability to identify quality challenges and develop effective solutions. Quality Problem-Solving: Expertise in identifying and resolving complex quality issues within the manufacturing process. Team Leadership: Proven experience leading and motivating quality teams to meet goals. Communication Skills: Excellent verbal and written communication skills, with the ability to interact with cross-functional teams and customers. Customer Complaint Management: Experience managing customer complaints, ensuring timely resolutions and customer satisfaction. Regulatory Compliance: In-depth knowledge of industry standards and regulatory requirements (e.g., VDA 6.3 certification, IATF 16949). Root Cause Analysis: Expertise in conducting root cause analysis and implementing effective corrective and preventive actions. Continuous Improvement: Focused on driving continuous improvement through process optimization and quality initiatives. Quality Audits: Experience conducting or managing quality audits (including VDA 6.3 Certification and IATF 16949). Training Development: Experience developing and delivering quality training programs for internal teams. Quality Documentation (CP, PFMEA, MSA, SPC): Expertise in maintaining and updating quality-related documentation, including Control Plans (CP), Process Failure Mode and Effect Analysis (PFMEA), Measurement System Analysis (MSA), and Statistical Process Control (SPC). Customer Complaint Management: Skilled in managing and resolving customer complaints effectively to ensure high customer satisfaction. Quality Management Systems (e.g., IATF 16949): Proficient in the implementation and maintenance of quality management systems, including IATF 16949. Automotive Industry Knowledge: In-depth knowledge of the automotive industry, including standards, regulations, and best practices for quality assurance. Capabilities & Desired Characteristics : Lead & Collaborate : Lead and/or collaborate with cross-functional teams and departments to ensure expedited closure of complex product and process quality issues from initiation to closure. Technical Expertise : Act as a technical expert to lead IATF16949, ISO9001, VDA QMS audits. Implement procedures and best practices per industry QMS standards. Problem-Solving : Facilitate the use of structured problem-solving tools in root-cause investigation and corrective action identification. KPI Management : Create and manage KPIs, ensuring clear communication and expectations with factories for timely improvement plans. Collaboration & Prioritization : Ability to work collaboratively with cross-functional teams and handle multiple tasks while prioritizing effectively. Product Improvement : Develop and execute product improvement processes for the resolution of various quality issues and coordinate with other departments for the development of new products as per APQP & PPAP standards. Quality Improvement Cell : Build a cross-functional Quality Improvement Cell for constant review of processes and develop solutions to improve efficiency and reduce waste. Root Cause Analysis : Experience with root cause analysis and corrective actions. Organizational Skills : Strong organizational and time management skills. Employee Benefits : 1. Comprehensive Health Insurance: We prioritize the well-being of our team by offering comprehensive health coverage, ensuring peace of mind for you and your family. 2. Professional Development Opportunities: At Electrica, we believe in continuous learning. We provide access to training programs, workshops, and certifications to help you grow in your career. 3. Work-Life Balance Support: We promote a healthy work-life balance through flexible working hours and paid time off, ensuring you have time to recharge and focus on what matters most.

Job Overview: Electrica Engineers Pvt Ltd is seeking a highly skilled Senior Engineer in Design Department to support the Testing, Certification, and Development of Automotive Lighting Systems . The ideal candidate will have significant experience in Photometry and Colorimetry Testing , as well as a solid understanding of Automotive Lighting Regulatory Standards , including ARAI and ECE . This position plays a crucial role in ensuring that automotive lighting products meet compliance and performance requirements for homologation . Key Responsibilities: Regulatory Knowledge : In-depth knowledge of automotive interior and exterior lighting regulatory requirements, specifically AIS (012, 057) and ECE (R148, R150) standards. Testing Expertise : Independently conduct photometry and colorimetry testing of both exterior and interior automotive lamps to ensure they meet specified standards. Report Generation : Create, evaluate, and validate photometry and colorimetry reports, ensuring accuracy and compliance with customer and regulatory requirements. Certification Coordination : Collaborate with ARAI and ECE for certification activities, ensuring timely submission and approval of lighting products. Audits : Prepare for and actively participate in ARAI, ECE , and CCC COP audits for automotive lighting systems. DVP Testing : Provide knowledge and support for DVP testing specific to Automotive Lighting (preferred). Cross-functional Collaboration : Work closely with internal teams such as R&D, design, and quality to integrate homologation requirements into the product development lifecycle. Desired Qualifications: Educational Background: Bachelor of Engineering in Mechanical, Electrical, or related field. Experience: 2 - 4 years of experience in photometry and colorimetry testing, with a focus on headlamps, tail lamps, DRLs, fog lamps, and small lamps. Key Skills: Technical Skills : Photometry and colorimetry testing, Knowledge of ARAI (AIS 012, AIS 057) and ECE (R148, R150) homologation standards and Experience with DVP testing for automotive lighting (preferred) Communication Skills : Strong verbal and written communication skills in English, with the ability to interact effectively with regulatory bodies and internal teams. Regulatory Knowledge : Familiarity with automotive lighting industry standards and part validation processes. Capabilities & Desired Characteristics: Testing Expertise : Strong knowledge of photometry and colorimetry testing processes and standards for automotive lighting. Collaboration : Ability to collaborate effectively with cross-functional teams, including design, quality, and regulatory teams. Professionalism : High level of dedication, punctuality, and commitment to maintaining high standards of work. Attention to Detail : Detail-oriented with a focus on accuracy and compliance in all aspects of testing and reporting. Employee Benefits: Comprehensive Health Insurance: We prioritize the well-being of our team by offering comprehensive health coverage, ensuring peace of mind for you and your family. Professional Development Opportunities : At Electrica, we believe in continuous learning. We provide access to training programs, workshops, and certifications to help you grow in your career. Work-Life Balance Support : We promote a healthy work-life balance through flexible working hours and paid time off, ensuring you have time to recharge and focus on what matters most.

Job Overview: Electrica Engineers Pvt Ltd (EEIPL) is seeking a highly skilled and experienced Manager - Design Department to lead the design and development of automotive lighting systems. The Manager will be responsible for overseeing the development of both current and future projects, ensuring the integration of high-quality products, optimal cost management, and on-time delivery. The role requires in-depth knowledge of Automotive lighting systems , including headlamps, tail lamps, DRLs, fog lamps, and small lamps, with strong experience in Catia V5 and PLM systems. The ideal candidate will demonstrate leadership abilities, drive innovation, and work closely with cross-functional teams to meet customer expectations. Key Responsibilities: Product Design & Development: Lead the design and development of automotive lighting systems, including headlamps, tail lamps, DRLs, fog lamps, and small lamps, ensuring high product quality, cost optimization, and timely delivery. Team Leadership: Manage and mentor a team of design engineers, providing guidance and ensuring continuous development to achieve department goals. Engineering Excellence: Oversee the design process from conceptualization to final product release, ensuring compliance with regulatory standards and part validation requirements. Collaboration & Communication: Work closely with cross-functional teams, including quality, testing, and production, to ensure seamless integration of design and development processes. Moulds, Tools, Jigs & Fixtures: Lead the design and development of moulds, tools, jigs, and fixtures to ensure efficient manufacturing processes and high-quality product output. Regulatory Compliance: Ensure that designs meet all regulatory and safety standards in the automotive lighting industry. Customer Focus: Engage with customers to understand their needs, providing solutions that meet or exceed customer expectations for lighting systems. Process Optimization: Continuously evaluate and optimize design processes for better efficiency, cost-effectiveness, and innovation. Desired Qualifications: Educational Background: Bachelor of Engineering in Mechanical, Electrical, or related field. Experience: 8-12 years of experience in automotive lighting system design and development, with a focus on headlamps, tail lamps, DRLs, fog lamps, and small lamps. Regulatory Knowledge : Familiarity with automotive lighting industry standards and part validation processes. Innovation: Experience in leading design changes and driving innovation in automotive lighting solutions. Key Skills: Technical Skills: Proficiency in Catia V5 and PLM systems. In-depth knowledge of product design, moulds, tools, jigs, fixtures, and automotive lighting regulations. Leadership Skills: Strong leadership and team management abilities, with experience in driving execution and motivating teams. Problem-Solving Skills: Ability to solve complex design and development challenges, ensuring optimal results. Communication Skills: Excellent communication skills in English, with the ability to engage with customers, suppliers, and cross-functional teams. Capabilities & Desired Characteristics: Developing Self and Others: Recognizing the importance of continuous development and taking steps to improve both personal skills and those of the team. Leading Change: Ability to identify the need for change and guide the team through it effectively. Driving Execution: Translating strategies into actionable steps and ensuring successful execution. Leading by Example: Upholding high ethical standards and encouraging others to do the same. Motivating Self and Others: Inspiring and driving teams to achieve excellence in their work. Customer Centricity: Anticipating and meeting the needs of customers and stakeholders. Employee Benefits: Comprehensive Health Insurance: We prioritize the well-being of our team by offering comprehensive health coverage, ensuring peace of mind for you and your family. Professional Development Opportunities: At Electrica, we believe in continuous learning. We provide access to training programs, workshops, and certifications to help you grow in your career. Work-Life Balance Support: We promote a healthy work-life balance through flexible working hours and paid time off, ensuring you have time to recharge and focus on what matters most.

Job Overview: Electrica Engineers Pvt Ltd is seeking an experienced and detail-oriented Senior Executive Engineer for the Customer Support in Quality Department . The ideal candidate will be responsible for handling Customer Complaints, ensuring their Effective Resolution, and Driving Continuous Improvement initiatives to enhance Product Quality and Customer Satisfaction. The Senior Executive Engineer will work closely with the Quality team to manage complaint handling and ensure the closure of all Customer Issues Related to Quality . Key Responsibilities: Customer Complaint Management: Investigate and resolve customer complaints related to product quality, ensuring effective resolution and maintaining customer relationships. Data Analysis: Analyze customer feedback and quality data to initiate corrective actions and identify trends or recurring issues. Quality Issue Resolution: Address quality issues quickly, implementing corrective actions to minimize production impact and prevent recurrence. Continuous Improvement: Lead continuous improvement initiatives, ensuring that processes are optimized for product quality and operational efficiency. Training and Development: Provide training to team members and other departments on quality standards, complaint management processes, and root cause analysis techniques. Prepare and Present Reports: Regularly compile and present quality reports to senior management, covering key performance indicators, customer complaints, and improvement actions. Monitor Quality Metrics: Continuously evaluate quality metrics and performance indicators to ensure that targets are met. Maintain Quality Documentation: Update and manage quality-related documentation, including customer complaints, corrective actions, and field claims. 8D and Problem Solving: Prepare 8D reports and other problem-solving documents, ensuring their effective closure and submission. Regulatory Compliance: Ensure compliance with relevant industry regulations, including IATF 16949, and support external audits. Cross-Functional Collaboration: Work with teams such as Engineering, Manufacturing, and Supply Chain to ensure quality standards are maintained and to resolve customer issues. Root Cause Analysis: Conduct thorough root cause analysis for quality issues, implement corrective actions, and ensure proper follow-through to eliminate recurring problems. Customer Satisfaction: Ensure that products and services meet customer expectations and regulatory quality standards, resolving issues promptly. Support Audits: Support internal quality audits and contribute to the company's external certifications. Desired Qualifications: Education: Diploma or Bachelor's degree in Engineering (preferably in E&TC or Mechanical). Experience: Minimum of 5-8 years of experience in electronics assembly or a related field with strong focus on customer support for OEMs (e.g., TML, M&M, SAVW, Stellantis). Key Skills: Analytical Skills: Ability to analyze data and perform root cause analysis to resolve quality issues. Problem-Solving: Effective at identifying quality challenges and developing solutions to address them. Customer Complaint Management: Proven experience in managing customer complaints and ensuring timely resolutions. Communication: Strong communication skills to work with customers, suppliers, and internal teams. Continuous Improvement: Demonstrated commitment to driving continuous improvement initiatives. Quality Audits: Experience conducting or managing quality audits, including knowledge of IATF 16949 standards. Quality Documentation: Expertise in preparing and maintaining quality-related documents such as CP, PFMEA, MSA, SPC. Collaboration: Ability to work effectively with cross-functional teams to achieve quality goals. Capabilities & Desired Characteristics: Technical Support Expertise: Ability to provide clear and effective technical support to customers via phone and email, addressing their concerns and troubleshooting issues efficiently. Analytical & Problem-Solving Skills: Strong analytical skills to identify, analyze, and resolve complex customer issues with effective solutions. Industry-Specific Experience: Hands-on experience with troubleshooting and resolving issues in the Lighting industry , ensuring the optimal performance of products. Communication Skills: Excellent communication and interpersonal skills to interact effectively with customers and internal teams, ensuring smooth and clear exchanges. Attention to Detail: Strong attention to detail, ensuring high-quality standards are maintained in all aspects of customer service and product support. Composure Under Pressure: Ability to stay calm under pressure and handle difficult or urgent situations, managing customer complaints and meeting deadlines without compromising quality. Regulatory & Industry Knowledge: In-depth understanding of industry standards and regulatory requirements, ensuring compliance in all aspects of product quality and service. Root Cause Analysis & Corrective Actions: Experience in performing root cause analysis for customer complaints, implementing corrective actions, and ensuring effective resolutions to avoid recurrence. Organizational & Time Management Skills: Strong organizational skills with the ability to manage multiple tasks effectively, prioritize responsibilities, and meet deadlines in a fast-paced environment. Collaborative Teamwork: Ability to work collaboratively with cross-functional teams, including engineering, manufacturing, and supply chain, to resolve customer issues and drive continuous improvement. Training & Development: Experience in developing and delivering training programs to internal teams, ensuring consistent and high-quality customer support. Proactive Problem-Solving: A proactive approach to identifying and addressing potential issues, continuously improving processes and solutions to enhance customer satisfaction. Customer Complaint Management: Extensive experience in managing and resolving customer complaints in a timely and efficient manner, ensuring customer satisfaction and retention. Commitment to Continuous Improvement: Demonstrated commitment to continuous improvement through process optimization, quality enhancement, and operational efficiency in customer support and product delivery. Employee Benefits- 1. Comprehensive Health Insurance We prioritize the well-being of our team by offering comprehensive health coverage, ensuring peace of mind for you and your family. 2. Professional Development Opportunities At Electrica, we believe in continuous learning. We provide access to training programs, workshops, and certifications to help you grow in your career. 3. Work-Life Balance Support We promote a healthy work-life balance through flexible working hours and paid time off, ensuring you have time to recharge and focus on what matters most.

Job Overview : Electrica Engineers Pvt Ltd is seeking an Assistant Manager for the Purchase department to handle procurement, vendor relations, and ensure timely development of new child parts. The ideal candidate should have a background in Automotive Electrical/Electronic/Plastic Fields, strong vendor management experience, and a focus on cost-saving initiatives. Key Responsibilities : Vendor Relations & Development : Develop and assess new vendors, track procurement timelines for child parts, and ensure no production loss due to shortages. Purchase Management : Handle daily purchase activities, including vendor selection and negotiation for the best techno-commercial offers. New Part Development : Track the development of new child parts, from sourcing to tooling and sample approval, ensuring delivery as per schedule. Cost Management : Manage and negotiate service contracts, tooling costs, and rate revisions for cost-saving opportunities. Audit Compliance : Prepare for IATF and customer audits, ensuring documentation and vendor processes meet audit requirements. Team Leadership : Lead a team of 3-4 people, guiding them in procurement, cost negotiation, and vendor assessments. Requirements : Educational Background : B.E. in Mechanical, Electrical, or Electronics Engineering. Experience : 8-12 years of experience in the automotive electrical/electronic/plastic fields, including procurement and vendor management. Technical Skills : Knowledge of plastic parts , PCBA , PCB , LED , passive components , wiring harnesses , bulbs , and rubber parts . Familiarity with service contracts , tool cost negotiation , and experience with IATF and Customer Audits . Specific Required Technical Key Skills : Knowledge of Electronic Manufacturing Systems . Ability to evaluate data sheets of raw materials such as LED and passive components . Preferred Qualifications : Experience in Tooling and Die development , managing timelines, and coordinating with suppliers. Strong understanding of Vendor assessment , C ost Impact Calculations , and Rate Revisions . Capabilities & Desired Characteristics : Detail-Oriented : Maintain accurate records of vendor activities and cost calculations. Techno-Commercial Expertise : Ability to manage and negotiate with vendors, finding opportunities for cost reduction. Leadership Skills : Lead a small team in purchase management and vendor coordination. Audit Preparedness : Experience preparing for and managing IATF and customer audits. Employee Benefits- 1. Comprehensive Health Insurance We prioritize the well-being of our team by offering comprehensive health coverage, ensuring peace of mind for you and your family. 2. Professional Development Opportunities At Electrica, we believe in continuous learning. We provide access to training programs, workshops, and certifications to help you grow in your career. 3. Work-Life Balance Support We promote a healthy work-life balance through flexible working hours and paid time off, ensuring you have time to recharge and focus on what matters most.

Job Overview: Electrica Engineers Pvt Ltd is seeking an experienced and detail-oriented Senior Executive Engineer for the Design Department . The ideal candidate will assist in the design and development of Automotive Lighting systems using CATIA V5 , with a strong focus on 3D Modeling and Engineering Change Management . The Junior Executive Engineer will play a key role in ensuring the integration of high-quality plastic components, specifically in the automotive industry, and contribute to continuous improvement across the design and development processes. Key Responsibilities: 3D & 2D CAD Development: Develop 2D and 3D models of new products and parts using CATIA V5, in compliance with customer specifications. Product Design: Collaborate on the conceptual design and proposal of new automotive lighting products. Engineering Change Management: Prepare and implement engineering changes as per the approved change notes. Quality Interaction: Liaise with the quality and testing departments for part inspections and approvals. BOM Preparation: Create Bills of Materials (BOM) and material Specifications for new products. Project Coordination: Assist in preliminary project planning, coordination, and tracking of design activities. Customer Interaction: Engage with customers for drawing approvals and technical discussions. Requirements: Educational Background: B.E in Mechanical Engineering with specialization in CATIA V5 (Plastic Domain preferred). Experience: 3-6 years of experience in the Design of Plastic Automotive Lighting Systems. Technical Skills: Proficient in CATIA V5, plastic Injection Molding, 3D modeling, DFMEA, BOM preparation, and engineering change management. Communication Skills: Strong communication skills in English, Marathi, and Hindi. Software Proficiency: Expertise in CATIA V5 is mandatory. Preferred Qualifications: Experience in APQP Homologation tests on lighting parts. Familiarity with GD&T and Plastic Tooling and assembly. Capabilities & Desired Characteristics: Detail-Oriented: Attention to detail in design and compliance with specifications. Team Collaboration: Ability to collaborate with cross-functional teams and work closely with superiors. Analytical Thinking: Strong analytical skills for problem-solving and design optimization. Professionalism: Dedicated, punctual, and committed to maintaining high standards of work. Employee Benefits- 1. Comprehensive Health Insurance : We prioritize the well-being of our team by offering comprehensive health coverage, ensuring peace of mind for you and your family. 2. Professional Development Opportunities : At Electrica, we believe in continuous learning. We provide access to training programs, workshops, and certifications to help you grow in your career. 3. Work-Life Balance Support : We promote a healthy work-life balance through flexible working hours and paid time off, ensuring you have time to recharge and focus on what matters most.

L3 Support - Submarine Modem Technology Experience:4-8 Years Salary:15 -18 LPA Offshore Location:Bangalore (Preferred) Shift Timings No L3 -Support requirements (Ciena MCP, Infinera DNA) Sub-sea systems knowledge, specifically: Submarine modem technology, e.g.,Ciena Wave Logic, Infinera ICE Submarine Line Terminal Equipment / Photonics Power feed equipment Management systems (e.g., Ciena MCP, Infinera DNA) Submerged wet plant, e.g., repeater technology

Sound knowledge in Automotive Electronics. Leads Planning, Executing,Monitoring & Controlling Automotive Product Development. Experience in Product Bench marking & Feasibility Study. Preparation of APQP/ PPAP documents. Handling customer complaints. Required Candidate profile Experience in Automotive Accessories development. ADAS-Advanced Driver Assist systems products is desirable. Development of new product in automotive electronics industry. Product approval Perks and benefits Please treated as most urgent.

Preferred candidate profile Must have bachelors degree in Mechanical with 60% Marks. Must be able to communicate well in English, both verbally and in-written. Experience of 3 - 7 years in similar position in heavy construction equipment manufacturing industry / automobile industry / similar industry Experience with quality tools/terminologies/methodologies used in manufacturing & assembly of steel fabrications, castings & forgings, machining. Must have a good working knowledge of Microsoft office skills (Outlook, Word, Excel, PowerPoint). Certifications such as Certified Quality Engineer (CQE) are a plus. Must be able to travel within India on short notice, when necessary. Responsibility : Candidate will be reporting to operations manager and is required to implement his / her technical knowledge for supplier quality support. Key responsibilities are as below but not limited to: Evaluate potential suppliers and assess their capabilities to meet quality standards. Develop and maintain supplier quality agreements and performance. Conduct regular audits and assessments of supplier facilities and processes to ensure compliance with quality standards and regulations. Well, known to CAPA (Corrective Action & Preventive Actions) documentation, control plan, Layout report, PDI report, Product audit. Lead root cause analysis investigations for supplier-related quality issues and develop action plans to address underlying causes via NCR. Shall prepare 8D reports, PPAP, APQP, PPM, MSA & FMEA reports. Should be aware of Quality tools Work closely with cross-functional global teams, including Purchasing, Engineering, and Manufacturing, to communicate quality requirements to suppliers and support supplier development activities. Responsible for incoming inspections, in-production inspections, and final inspections Responsible for Product Audit, Process Audit, Document Audit & Quality assurance plan. Before dispatch, generating and maintaining inspection related documentation. Assessing, preparing and / or maintaining technical reports and documentation of products. Maintain supplier quality documentation, including supplier audit reports, corrective action plans, and performance records. Providing necessary assistance to another departments. Stay abreast of industry trends, best practices, and regulatory requirements related to supplier quality management.