299 Welding Inspection Jobs - Page 4

Inspect mechanical equipment and materials to ensure compliance with required standards and specifications Evaluate the quality and integrity of process equipment and report discrepancies or non-conformities to management Visit fabrication shops and plant sites to assess mechanical integrity and verify adherence to applicable codes Monitor and document the condition of pipelines, pumps, tanks, vessels, valves, and structural supports Witness and verify hydrotesting of piping systems and equipment to ensure safe operation Inspect welding at various stages of fabrication for piping and mechanical equipment Collaborate with quality control teams and site personnel to ensure all inspection activities are conducted as per procedures Prepare detailed inspection reports and maintain accurate documentation for all field activities Support quality assurance practices and help maintain compliance with industry regulations and client standards

Performing, Interpretation and Evaluation of NDE methods like PT, MT, UT and RT as per ASME Section V, ASME Section I or VIII Preparation of NDE reports, technique sheets and other documentation Development of new NDE techniques Procedure preparation as per ASME Code/Customer specification and getting approval of the same from Customer Day to day NDE planning, Job allocation to NDE personnel and long term resource planning of NDE department Cost estimation of NDE for project enquiries Maintaining Calibration of NDE instruments Co-ordination with other departments, contractors and TPIs/Customers. Maintaining documentation of Personnel Qualification as per SNT-TC-1A. Note: Preference will be given to Candidate having experience of Advance NDE techniques like ToFD, PAUT, Digital Radiography or Computed Radiography

Knowledge of metals (SS, CS), ASME/EN standards, SAW, TIG, MIG, FCAW welding. Prepare procedures, train personnel, ensure weld quality. Good communication skills for training, customer & inspection agency interaction.

Will work in Qualification Test lab for Pressure and load testing of Subsea & Surface products per specified industry standards Executes and supports Product Qualification testing activities as Test Engineer. Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope. Develops Lab product/tool design, geometry standards documentation for product qualification requirements. Creates, reviews/approves part reports, drawings, engineering specifications and standards. Closely works with quality Engineer, product engineer, buyer, Project manager and all associated stakeholders. Supports and manage qualification project schedule and deliverables. Provides Management with technical assistance and work progress updates as requested. Mentors and provides technical guidance to Technicians. Works collaboratively to accomplish project tasks. Provides independent review of work packages. Provides vendors technical assistance and builds strong working relationships. Executes qualification per the requirements of industry code related to subsea production systems, TechnipFMC standards and client specifications, following the test procedures. Adheres to all relevant safe work instructions and design guidelines, Clearly demonstrates creativity and innovation in finding solutions and alternatives for shop floor issues and troubleshooting This is an individual contributor position. The role is responsible for executing activities assigned by the manager, and execute it with the assigned team. You are meant for this job if: Degreed Mechanical Engineer with at least 2/4-years of Engineering/qualification testing experience in the Subsea Production System engineering, reduced to 1/3-years for Masters candidates. Demonstrated experience in supporting qualification projects constrained by safety, quality, delivery, and cost requirements. Experience in reviewing Test procedures, documents, layouts, safety work plans and interpreting results of test. Work experience to include experience with various ASME, API, NORSOK, and DNV Codes and Standards as it relates to subsea equipment design and manufacturing. Exposure to various manufacturing processes - forging, hot and cold extrusion, cladding, HIP, induction bending etc Exposure to welding codes and practices - ASME IX and API 1104. Exposure to NDE codes and practices - UT, PAUT, PT, RT, MPI per ASME V. Accuracy, dependability, ability to manage schedule and prioritize work for self and others in team. Ability to work independently and as a part of a technical team - a self-motivated, self-starter. Strong written and verbal communication skills in English with ability to effectively transfer subject matter expertise. Ability to coach and mentor others.

Role & responsibilities 7 to 8 Years Experience in Fabrication Industry (Preferably Machine Build Manufacturing). Strong Understanding of Welding Process, Steel Grades, and Fabrication Techniques. Knowledge of Inter National Standards (AWSD-1.1, ASME,EN,BS). Excellent Leadership, Communication and Problem-solving Skills. Proficient in MS Office and QA/AC Software Tools. Reduction in Re-work and Scrap Rates. Timely Closure of NCRS. Compliance rate with Project Specification and QMS. Handling Internal and External audit. Customers' Satisfaction Scores. Oversee Material Inspection, Welding Inspection, Dimensional Checks and Surface Verifications. Co-ordinate NDT (Non-destructive Testing), such as UT, RT, MT and PT in accordance with Project Specification. Maintain Calibration Records for Measuring and Testing Equipment's Monitor Fabrication and Welding Process to ensure other adherence to WPS ( Welding Procedure Specifications). Identify Process Deviations and Implement Corrective and Preventive actions (CAPA). Work with Production Teams to improve manufacturing accuracy and reduce re-works. Source Identification WPQR Filler Material Identification based on Projects. All above Projects and activities to report to GM on daily basis and Weekly Presentation submit to Director on Every Friday. Any deviation during the process on any Projects Report to GM on daily basis.

Hiring, Diploma Engineers who are willing to work in Inspection and Quality department with a Heavy Metal Fabrication Company in Bangalore Rural. Good communication skills in English is a must. Key Responsibilities Assist in day-to-day quality inspection activities in fabrication and assembly areas. Conduct dimensional and visual inspections of fabricated components as per drawings and standards. Verify welding quality, material thickness, surface finish, and alignment during fabrication. Maintain and update inspection records, reports, and quality documentation. Support the implementation of quality standards (ISO / ASME / relevant standards). Coordinate with production teams to resolve quality issues on the shop floor. Assist in root cause analysis and corrective action for non-conformances. Monitor use of calibrated measuring instruments (Vernier, Micrometer, Welding Gauges, etc.). Ensure compliance with safety and quality procedures. Skills Required Basic knowledge of fabrication processes (welding, cutting, machining, assembly). Familiarity with inspection tools and measuring instruments. Understanding of engineering drawings, GD&T basics, and tolerances. Knowledge of basic quality standards (ISO 9001, ASME, AWS preferred). Good communication and reporting skills. Willingness to learn and work in a shop-floor environment. Personal Attributes Detail-oriented with strong observation skills. Proactive and eager to learn. Ability to work in a team environment. Commitment to safety and quality.

Responsibilities Verification of materials, mill test certificates and confirming compliance to thecode & company requirements during IMIR clearance. Must have experience as Lead Quality Engineer Conducting welding procedure qualification tests and maintaining procedurequalification records (PQR) for Structural, Tank & Piping works. Preparation of Welding Procedure Specification & conducting ProcedureQualification test at site per requirement. Verification of welding consumables BTCs & conduct necessary Qualificationtest at site. Preparation of Job procedure & ITP pertaining to Structural, Piping & Tankworks. Periodical Site Internal Audits. Visually inspecting the fit up & welded joints of Structural, Tank & Piping works. Welding inspection (surveillance checks before, during and after welding) Conducting all NDT inspections and preparation of all inspection records. Coordination with Customer for necessary day-to-day inspections. Piping test package preparation, review, and site verification and punching thepending activities. NDT Clearance of Piping Test packs Hydrotest witness of Tank & Piping system.

As an NDT Technician based in Chennai, you will be responsible for performing Ultrasonic Testing (UT) inspections. The ideal candidate should have Welding Inspection experience and at least 3 years of hands-on experience in UT. This is a 2 years contract position and you are expected to work 8 hours per day with overtime as needed. Free bachelor accommodation will be provided during the duration of service. If you meet the qualifications and are interested in this opportunity, please apply before 28th March 2023.,

Qualification ITI Welding / Diploma Mech / Production Experience required 3 years and above Essential Skills 1.Hands on experience in GTAW welding, Laser welding and welding automation. Candidate should be able to do welding with automation setup independently. 2. Familiar with welding metallurgies like SS 316 , Hastelloy, Ni alloys. 3.Knowledge of working of welding machines, Argon plus Hydrogen gas flow systems, He leak testing, welding torches, ceramics, nozzles, tungsten sharpeners and automation systems. Desired skills 1.Candidates having experience of welding automation in clean room environment (10K class) will be preferred. 2. Candidates with knowledge of cleaning processes and handling, maintaining ultrasonically clean parts during welding will be preferred. 3. Knowledge of cutting, polishing and etching of welded metal specimens 4. Handling of microscopes for weld geometry evaluations. Preferred Industries Aerospace , Pressure vessel, Piping , Oil and Gas, Precision Welding etc.

We are urgently hiring skilled and experienced Welder Fabricators for reputable companies in Singapore across various industries such as marine, construction, and manufacturing. The ideal candidate will have hands-on experience in welding, cutting, fitting, and fabricating metal structures using different techniques and equipment. [ PHONE : +91 62953 36397 / +91 95069 63753 ] KEY RESPONSIBILITIES Interpret and read blueprints and technical drawings to understand project specifications. Perform welding and fabrication tasks using various techniques such as MIG, TIG, and Stick welding. Assemble and fabricate metal structures and components according to specifications. Maintain welding equipment and tools to ensure optimal performance and safety. Collaborate with team members to meet project deadlines and production goals. KEY REQUIREMENTS Proven experience in welding and fabrication techniques (0-05 years of experience). Proficient in reading and interpreting blueprints and technical drawings. Knowledge of different types of welding processes such as MIG, TIG, and Stick welding. Ability to operate hand tools and machinery related to welding and fabrication. KEY BENEFITS 8 Hrs Duty & Six days Employment in one week (Monday - Saturday) Overtime and allowances as per Singapore labor laws Work Permit Employment Visa for 2 years in Singapore Long-term career opportunity with reputable companies Fooding Meal & Medical Facilities (provided by the company) Accommodation and transportation (provided by the company) Salary Range : 79,999 INR up-to 1,19,999 INR Our dedicated team is available to assist you by phone. Whether you have questions about our services or need personalized guidance, contact us at +91 62953 36397.

Description We are seeking a skilled Piping Inspector to join our team in India. The ideal candidate will have a strong background in inspecting piping systems and ensuring compliance with industry standards. This role requires meticulous attention to detail and a thorough understanding of piping materials and inspection methodologies. Responsibilities Conduct inspections of piping systems to ensure compliance with industry standards and specifications. Review engineering drawings and technical documentation related to piping systems. Perform non-destructive testing (NDT) methods such as ultrasonic, radiographic, and magnetic particle testing. Identify and document any defects or non-conformities in piping materials and workmanship. Prepare detailed inspection reports and communicate findings to project management and engineering teams. Ensure that all inspections are carried out in accordance with safety regulations and quality assurance procedures. Skills and Qualifications Diploma or Degree in Mechanical Engineering or a related field. 3-5 years of experience in piping inspection or quality control in the oil and gas, petrochemical, or construction industries. Familiarity with relevant codes and standards (e.g., ASME, API, ISO). Proficient in non-destructive testing (NDT) techniques and methodologies. Strong analytical skills with attention to detail to identify defects and non-conformities. Excellent communication skills to effectively report findings and collaborate with team members.

Description We are seeking a skilled 6G TIG / ARC Welder to join our team in India. The ideal candidate will have extensive experience in welding techniques and be capable of performing high-quality welds on various materials. This role requires adherence to safety standards and the ability to work collaboratively on complex projects. Responsibilities Set up and operate TIG and ARC welding equipment for various projects. Read and interpret blueprints and technical drawings to determine welding requirements. Perform welding tasks on a variety of materials including steel, aluminum, and stainless steel. Ensure quality control by inspecting welds and making adjustments as necessary. Maintain a clean and safe work environment following all safety protocols and regulations. Collaborate with team members and project managers to ensure timely completion of projects. Skills and Qualifications 3-5 years of experience in TIG and ARC welding, preferably in industrial settings. Proficiency in reading and interpreting technical drawings and blueprints. Strong understanding of welding techniques, processes, and safety standards. Experience with various welding materials, including but not limited to steel, aluminum, and stainless steel. Certification in welding (e.g., AWS, ASME) is a plus. Strong attention to detail and commitment to producing high-quality work. Good communication skills and ability to work in a team environment.

Description We are seeking an experienced 6G TIG / ARC Welder (SS) to join our team in India. The ideal candidate will have a strong background in welding techniques, particularly in stainless steel, and will be responsible for producing high-quality welds while adhering to safety and quality standards. Responsibilities Perform TIG and ARC welding on stainless steel components as per specifications Interpret engineering drawings and blueprints to determine welding requirements Ensure high-quality welds and adherence to safety standards Maintain welding equipment and tools in good working condition Collaborate with team members to meet production schedules and quality standards Skills and Qualifications 3-5 years of experience in TIG and ARC welding, preferably on stainless steel Proficient in reading and interpreting technical drawings and specifications Strong understanding of welding safety practices and equipment operation Ability to perform quality inspections of welds and identify defects Certifications in welding processes or relevant technical courses will be an added advantage

As the Project Quality Manager, your main responsibilities will include overseeing all Quality assurance and Quality control activities throughout the project lifecycle, from Design/ Engineering, Procurement, Construction, Inspection/ Testing to Commissioning phases. You will be advising and guiding project line management on all Quality and verification activities, along with related technical matters. It will be your responsibility to establish, implement, operate, and maintain the Quality Management System for projects in compliance with relevant standards. You will also play a key role in identifying, allocating quality resources, and providing Quality training for all project personnel, ensuring that they understand and effectively execute their responsibilities as per the quality plan and procedures. Managing the Non-conformity process, implementing corrective and preventive actions, and monitoring their effectiveness will be part of your duties as well. In addition to your prime responsibilities, you will lead Quality Audits both internally and externally, managing multi-discipline QA/QC teams. Regularly conducting Project Quality System review meetings with the project team is also expected from you. Key relationships in this role include internal interactions with Employees and external interactions with Customers, Vendors, Site coordination, and Regulatory bodies. To excel in this role, it is essential that you have experience in Quality Management within the EPC phases of oil and gas projects. Previous experience working with international clients in India or abroad is required. Being a qualified QMS Lead Auditor and having worked as a Project Quality Manager for mega-sized Oil and Gas projects are also prerequisites. Familiarity with international codes and standards used in the Oil and gas industries is a must-have for this position. Additionally, possessing ASNT Level II/III certification in NDE techniques and certification (CSWIP/AWS/NACE/BGAS) in Welding and Painting inspection would be advantageous. Exposure to exotic, non-ferrous, and non-metallic materials is considered a plus. In summary, as the Project Quality Manager, your role will be crucial in ensuring the quality assurance and control activities are effectively implemented across all project phases, while maintaining compliance with standards and regulations. Your expertise and leadership will be instrumental in achieving project quality objectives and delivering successful outcomes.,

We are seeking an MIG Welder to join our fabrication team. In this role, you will be using MIG equipment to weld large pieces of steel and aluminum. You must be able to set up the equipment and clamp, grind, or bolt the materials into the proper position before welding. You will also inspect the final products for quality, so you should be able to read and interpret blueprints and other technical drawings. Applicants must be able to pass an MIG weld test and a pre-employment drug screening. Any experience with TIG welding is also a plus, although we will consider applicants with beginner skills.

Hiring, Position: Inspection & Quality Manager Experience: 10 to 30 years Prefer candidates working for Bulk material handling manufacturing, Welding, Fabrication, Beam, Channel, Framing, Bracing and so on. Key Responsibilities - Lead and manage all quality assurance and inspection activities across the machine shop and shop floor. - Develop, implement, and maintain Quality Management Systems (QMS) in line with ISO standards. - Oversee in-process and final inspections, ensuring compliance with customer specifications and industry regulations. - Conduct root cause analysis and drive corrective and preventive actions (CAPA). - Collaborate with production, engineering, and supply chain teams to resolve quality issues. - Manage a team of quality inspectors and provide training on quality tools and techniques. - Prepare and present quality reports, KPIs, and audit findings to senior management. - Ensure calibration and maintenance of inspection tools and equipment. Required Skills & Tools - Strong knowledge of precision machining processes and shop floor operations - Proficiency in SPC, FMEA, 5S, Six Sigma, and Lean Manufacturing - Hands-on experience with CMMs, micrometers, calipers, and dial indicators - Familiarity with ISO 9001, AS9100, or IATF 16949 standards - Excellent leadership, communication, and problem-solving skills Qualifications - Bachelors degree in Mechanical/Production Engineering or related field - Certifications like CQE (Certified Quality Engineer) or Lean Six Sigma preferred

As an NDT Welding Inspector, you will be responsible for conducting non-destructive testing on welded components to ensure they meet quality standards and specifications. Your primary duties will include utilizing various testing methods such as visual inspection, ultrasonic testing, radiography, and magnetic particle inspection to identify defects or inconsistencies in welds. You will be required to interpret testing results, prepare detailed inspection reports, and communicate findings to relevant stakeholders. Additionally, you will work closely with welding technicians and engineers to address any issues that arise during the inspection process and recommend appropriate corrective actions. The ideal candidate for this role will possess a strong understanding of welding processes, NDT techniques, and relevant industry standards. You should have excellent attention to detail, problem-solving skills, and the ability to work effectively both independently and as part of a team. Overall, as an NDT Welding Inspector, you play a crucial role in ensuring the safety, quality, and integrity of welded structures and components in various industries, including construction, manufacturing, and aerospace. Your expertise and meticulous approach to inspection procedures will contribute to the overall success of welding projects and the prevention of potential defects or failures.,

We have openings for QA/QC Mechanical Engineer - Barmer Qualification : Dip or B.E/B.Tech - Mechanical Industry : Oil & Gas Experience : min 5+ years Job Description : * Should have experience in Oil & Gas EPC/Refinery construction project. * Strong technical knowledge of mechanical systems & equipments. * Strong technical knowledge of structural, piping systems, materials & welding processes. * Knowledge of rotating equipments is desirable. Location : Barmer If your interested for this position send your updated cv along with below details to kcharishma@meghaeng.com Total Exp: Relevant Exp : Qualification : DOB : Age : Current Company : Current location : Native : Current CTC : Expected CTC : Notice Period : Willing to relocate for Barmer location. Reason for job change: Note: who can join immediate to 30 days send your resumes.

Responsibilities: * Ensure quality control. * Oversee fabrication projects from start to finish. * Collaborate with engineers on execution. * Manage steel fabrication processes and drawings. * Calculate weight of enclosures from GA drawings.

ensures the quality and reliability of boiler systems by inspecting components, verifying compliance with standards, and implementing quality control measures throughout the design Location - Chakan, Pune Contact - Ashwini 7057469892

Handle Pre - FAT & FAT. Will visit the sites if required. To guide and support Operation at QA/QC team. To communicate with customer . Responsible for inter departmental communication. To Face Internal & external audits. Write technical reports. Provident fund Annual bonus Office cab/shuttle

Responsibilities: * Conduct weld inspections on pipes, skids, vessels, tanks, reactors. * Ensure compliance with ASME standards for fabrication and pressure vessel construction. Office cab/shuttle Annual bonus Provident fund Health insurance

As an experienced Inspector, you will be responsible for reviewing contractual requirements such as technical standards and specifications, identifying any execution or inspection issues that may arise. Your primary duties will involve the inspection of Pressure Vessels and components including Filters, Boilers, Storage Tanks, etc. You will oversee the inspection process from the raw material stage to the final stage, ensuring compliance with codes and standards like ASME Sec-VIII. This will involve reviewing documents like QAP, WPS, PQR, WPQR, NDT procedures, material identification, applicable testing, and conducting stage-wise inspections of welding and fabrication processes. In addition to Pressure Vessels, you will be involved in inspecting Piping systems for Process Plants. Your responsibilities will include conducting stage-wise inspections, components inspections, dimensional checks, and spool inspections at fabricators" sites. You will also be tasked with inspecting Pipes & Tubes, following ASTM, IS, and API standards from the raw material stage to the final inspection. This will involve reviewing documents, conducting various tests such as U.T., Eddy-current testing, MPT, Hydro-test, mechanical tests, and ensuring compliance with different grades. Furthermore, you will be responsible for inspecting piping components like Flanges, Fittings, Valves, Pumps, and conducting various testing activities as per applicable piping codes and product standards. Your expertise will also be required in the inspection of Castings, particularly critical components like Shafts, Roller assemblies, Gears, Mill Heads. This will involve activities such as Raw Material Identification, physical & chemical testing, U.T., M.P.I., D.P.T., and final inspections after machining. Moreover, your role will include inspecting Steel structures for hydro power plants, focusing on structural parts of hydropower projects such as radial gates, surge shafts, trash racks, as well as other structural elements like trusses and towers. You will be responsible for selecting the most appropriate inspection techniques, coaching and supervising inspectors, conducting vendor assessments, and managing project coordination. Your expertise will be crucial in preparing and implementing inspection checklists, coordinating and managing projects for inspection of bought-out items, site inspections, and fabricated structural parts. Your attention to detail, knowledge of codes and standards, and ability to ensure compliance with quality control and quality assurance requirements will be essential in this role.,

Mechanical Engineer, Knowledge of Welding Process, DPT,UT and RT, knowledge of Codes ASTM SEC II Part A & B, Sec IX, Sec V, Sec VII.ISO 9001, ISO 14001, ISO 45001 knowledge would be an added advantage Experience in Oil & Gas , Waste Water industry

Roles and Responsibilities Conduct quality audits, inspections, and testing to ensure compliance with industry standards and company policies. NDT, final inspection, incoming inspection, in-process inspection, visual inspection, PDI (Pre-Delivery Inspection), and ASNT Level II certification. Collaborate with cross-functional teams to identify areas for improvement in the production process. Maintain accurate records of quality documentation including test results, inspection reports, and certifications. calibration Follow up for measuring and monitoring instruments .