402 Welding Inspection Jobs - Page 15

Role & responsibilities Conduct daily inspections in accordance with drawings and applicable reference standards. Prepare and maintain inspection records that are traceable to the Goods Receipt Note (GRN). Assist with incoming inspections to facilitate GRN clearance. Perform inspections at the supplier's facility for machining, fabrication, and special processes such as powder coating, buffing, etc. Preferred candidate profile Perform accurate inspections and ensure compliance with expectations as outlined in the job role and responsibilities. Independently handle fabrication inspections in accordance with drawings and job card requirements, maintaining high accuracy.

Responsibilities: * Conduct weld inspections using NDT methods * Implement ISO standards * Ensure product compliance with specifications * Develop quality control plans * Collaborate on process improvements Annual bonus Provident fund

1. Welding Inspection & Monitoring Inspect welds to ensure compliance with applicable codes, standards, and specifications (ASME, AWS, API, ISO, etc.). Verify welding parameters (voltage, current, speed, preheat, interpass temperature). Conduct visual and dimensional inspection of welds before, during, and after welding. 2. Documentation & Reporting Review and approve Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and Welder Qualification Records (WQTR). Maintain inspection records, weld maps, and generate detailed inspection reports. Report non-conformances and ensure corrective and preventive actions are implemented. 3. Non-Destructive Testing (NDT) Coordina...

Responsible for the Quality of materials, equipment, and services required by customer in line with various spec., Code, international standards, compliance with regulations. Welding : knowledge of diff. welding process, WPS & PQR will be preferable Required Candidate profile 3 to 5 years of QA exposure. Preferably from the fabrication industry. Deep knowledge of welding processes is a must. Perks and benefits Plant is inside GIDC, Manjusar.

• Experienced working in a pressure vessel / heat exchangers fabrication industry as QA/QC Engineer/Inspector • Minimum 3 to 5 years experience in Quality field of Heavy Fabrication & Welding • AWS or CSWIP 3.1 certified candidates are preferred Annual bonus Food allowance

Basic instrument knowledge knowledge about GD&T NTD Level 2 Certified Should have Basic knowledge about DPT Test, UT Test , VT Test Should have Basic knowledge about Vernier calliper, Micrometre , Height Gauge , Bore Gauge

Responsibilities: * Conduct NDT inspections using ASNT Level II techniques. * Perform ultrasonic, magnetic particle, penetrant testing, radiography testing & welding inspections. Food allowance Annual bonus Provident fund Health insurance

1. NDT Level 2 2. From Fabrication background

Roles and Responsibilities Design, develop, and implement welding processes and procedures for various projects. Conduct site visits to monitor welding operations and ensure compliance with safety standards. Collaborate with cross-functional teams to resolve technical issues related to welding equipment maintenance, fabrication, and inspection. Develop and maintain documentation of welding procedures, test reports, and certifications. Provide training on welding techniques, safety protocols, and quality control measures to team members. Analyzing engineering designs for welding requirements. Overseeing a team of welders. Reviewing welding procedures, processes, and documentation. Managing we...

Job Title - Quality Engineer Location - Jalgaon, Maharashtra Job Description : Urgent job opening for Welding Quality Engineer for Jalgaon Location. 1 year further extendable contract on MMK Role. Must have experience in Welding Quality Check and appropriate documentation. candidate who is having knowledge of Stainless-Steel welding quality checks / Visual inspection & rejection along with appropriate records / report generation. Who can work on site and can control the welders / welding operations Experience - 4 to 6 yrs Qualification - Any B.E. / Diploma Interested candidates can share their resume on - recruiter4@kushalengineers.com Connect on - 022-41556171 Only WP - 8108797259

Role & responsibilities We are seeking an experienced and proactive Foreman & Sr. Fitter to oversee and manage mechanical operations and maintenance in the Ferro Alloys division of our steel plant. The ideal candidate will be responsible for ensuring smooth functioning of mechanical equipment, reducing downtime, and enhancing reliability and performance of plant assets. Key Responsibilities Manage mechanical maintenance of Ferro Alloy furnaces, conveyors, crushers, briquetting machines, and associated utilities. Ensure preventive and predictive maintenance schedules are followed strictly to minimize breakdowns. Monitor equipment performance and implement continuous improvements for reliabili...

Role & responsibilities 1. Able to identify raw materials and co-relate traceability with mill certificates. 2. Able to witness laboratory tests (Mechanical, Chemical, Hardness etc.) 3. Able to inspect Groove Welding as well as Fillet Welding thoroughly. Conversant with all welding gauges & instruments. 4. Able to check individual structures (segment of shell, columns, beams , bracings, girders) 5. Able to Check Leveling, Control Assembly Dimension of Structures , Shells etc. 6. Inspector should have minimum NDT Level-II and able to witness VT, PT, MT, UT & RT respectively. 7. Able to check welding procedure & qualification records. Preferred candidate profile 1. Should be able to make photo...

Hiring for Asst.Manager Weld Shop Experience: 5-8 Years Location:KIADB, Plot No 1,2,3 (PART),Narsapur Industrial Area Work from office-6 days Shift: Non production general shift,Production team shifts Interview:1 Virtual and 1 F2F is mandatory Benefits: Free Food,Medical Insurance,Interview travel allowance for candidates who coming from out of station not for Bangalore candidates. Cab facility : KR puram, battarahalli, gg palya , employees should meet from nodal points,Someone not using a cab facility they will get travel allowance Job Description: 1. Welding Process : In-Process Welding, Process Monitoring, Welding Position, Sequence, Parameter, Drawing Reading Knowledge , Reading Welding ...

Roles & Responsibilities 1. NDT Inspection & Testing Perform Non-Destructive Testing (NDT) using RT, UT, PT, and LPT techniques as per ASNT Level II certification standards. Interpret test results accurately and prepare detailed inspection reports. Ensure inspection equipment calibration and maintenance is up to date. Conduct root cause analysis on NDT rejections and propose corrective actions. 2. Welding Inspection Inspect weld joints for quality compliance in MIG, MAG, TIG, and SMAW welding processes. Verify welding parameters, WPS (Welding Procedure Specification), PQR (Procedure Qualification Record), and WPQ (Welder Performance Qualification). Monitor fit-up, preheat, interpass temperat...

Should be able to inspect Weld quality,surface preparation,painting,machined items,witness/Perform NDT test,dimensional check,review of documents,update the inspection status.Reading & interpreting engineering drawing of fabricated structural & equi. Required Candidate profile Welding Inspection,Incoming,In-process & Final Inspection. Dimensional Inspection. Surface Preparation & Painting inspection. Raw Material Inspection Segregation of Non Conformity items/product.

QC Engineer with 2-3 years experiences in manufacturing Industries Overall line observation of scroll chiller & also doing PDI inspection report Third party Customer Inspection and documentation CAPA, Data Analysis, MRM, Root cause, Risk Assessment Required Candidate profile Process- High pressure Test Scroll chiller Run test Pre delivery Inspection Tank Chiller run testing Preparation & quality documents like NDE, incoming inspection, dimensional inspection report

Job Title: International Welding Engineer (IWE) Industry: Heavy Fabrication & Welding Location: Pune Reports To: Plant Head / CEO Job Type: Full-Time Certifications Required: IWE Position Summary: The International Welding Engineer (IWE) plays a critical role in planning, overseeing, and ensuring the integrity of welding processes in heavy fabrication projects. This includes structural steel, pressure vessels, large machinery, and other complex welded assemblies. The IWE ensures compliance with international standards, drives welding quality, and supports process optimization across engineering, manufacturing, and quality assurance departments. Key Responsibilities: 1. Welding Process & Proc...

Performing, Interpretation and Evaluation of NDE methods like PT, MT, UT and RT as per ASME Section V, ASME Section I or VIII. Preparation of NDE reports, technique sheets and other documentation. Development of new NDE techniques. Procedure preparation as per ASME Code/Customer specification and getting approval of the same from Customer. Day to day NDE planning, Job allocation to NDE personnel and long term resource planning of NDE department. Cost estimation of NDE for project enquiries. Maintaining Calibration of NDE instruments. Co-ordination with other departments, contractors and TPIs/Customers. Maintaining documentation of Personnel Qualification as per SNT-TC-1A. Note: Preference wi...

Knowledge of Tank, Reactor, Condenser Fabrication is a must Ensure quality control through inspections Oversee production processes & hydraulic testing Plan/Purchase as per raw material requirement and manpower distribution Verify labor costing

Designation : NDT Coordinator Qualification : Dip/ B.E in Mech Experience : 7 to 9 (Exp in Piping, ASNT Level II Certificate Must) Salary :5000 AED(1,20,000 INR) Free Food and Accommodation Contact & Whatsapp HR - Jenifer - 7358289659. Required Candidate profile Required Documents 1. Resume 2. Qualification Certificate 3. Experience Certificate 4. Original Passport 5. Photo Contact & share your resume through Whatsapp - Jenifer - 7358289659. Perks and benefits Free Food, Accommodation and Transport

Job Description Summary Looking for Welding Engineer with TIG Welding Experience in SS321 and INCO 625 Tubes and Sheets Job Description Company Overview : Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight! Site Overview: Our Multi-modal Manufacturing Facility (MMF) in Pune plays a crucial role in manufacturing key aerospace components, supporting not only Indias defense and commercial sectors but also global aviation supply chains. Our relationships with Indian suppliers...

Job NDT Inspector \u2013 Roles & responsibilities \uF0B7 NDT inspection \uF0B7 Part cleaning- pre cleaning & Post cleaning \uF0B7 Process control tests \uF0B7 Pre penetrant inspections \uF0B7 Quality documentations \uF0B7 Rework coordination \uF0B7 Quality clinic coordination for \u2013NDT rejections , rework analysis and corrective action \uF0B7 Final QC coordination for Quality issues \uF0B7 QCPC implementation \uF0B7 Review of customer acceptance criteria and prepare Work instruction \uF0B7 ASNT & NAS 410 Level 2 \u2013 training, experience log, Written and practical examinations, Vision examination & qualification requirements \uF0B7 Annual technical performance evaluations Work Experien...

Job NDT Inspector \u2013 Roles & responsibilities \uF0B7 NDT inspection \uF0B7 Part cleaning- pre cleaning & Post cleaning \uF0B7 Process control tests \uF0B7 Pre penetrant inspections \uF0B7 Quality documentations \uF0B7 Rework coordination \uF0B7 Quality clinic coordination for \u2013NDT rejections , rework analysis and corrective action \uF0B7 Final QC coordination for Quality issues \uF0B7 QCPC implementation \uF0B7 Review of customer acceptance criteria and prepare Work instruction \uF0B7 ASNT & NAS 410 Level 2 \u2013 training, experience log, Written and practical examinations, Vision examination & qualification requirements \uF0B7 Annual technical performance evaluations Work Experien...

We're looking for a highly motivated and experienced Assistant Manager - Welding Engineering to join our team. In this role, you'll be responsible for overseeing and optimizing welding operations, ensuring the highest standards of quality and efficiency. You'll play a crucial part in developing and implementing welding procedures, qualifying personnel, and maintaining compliance with industry standards. Roles and Responsibilities Develop, review, and approve Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) . Manage Welder Qualifications (WQ) and Operator Qualifications (OQ) , ensuring all welding personnel are certified and proficient. Provide expert guidance ...

Perform inspections of raw materials, in-process, and equipment. Review/make WPS/PQR, and TDS. Coordinate with TPI, customers for all inspections. Prepare reports, MTCs, heat treatment docs. Support NDT activities such as RT, UT, PT, and MPI. Required Candidate profile Mechanical Engineer required with 2–4 years of exp. in QA/QC in pressure vessel or heavy mfgg industry. ASME Section VIII, IBR, PED, and related standards knowledge with welding processes, NDT, etc