672 Plumbing Jobs - Page 26

Role & responsibilities Execute the Electrical/Mechanical works. Supervises the onsite Electrical, plumbing, firefighting, FAPA, HVAC works. Ensure that all information is available & materials are available at site to undertake the works. Ensure all materials are correctly stored at site and installed without damage. Arrange the required tools and equipment to be available at site. Control of the quality and technical correctness of the installation in accordance with the drawing Co-ordinate with the main contractor and other sub-contractors at site. Set targets and monitors the productivity of the workforce at site. Monitors the production and quality of sub-contractors works at site. Identifies additional works at site and advises the Project Engineer. Identifies delays at site and notifies the Project Engineer. Implements the inspection and test plan and obtains the supervising engineers approval at each stage of the works. Supervise & assure the system testing and commissioning

Knowledge of Utility maintenance including HVAC, Electrical, Mechanical & Plumbing systems, Electrical wiring, AC refrigerator, UPS batteries, VRV, CCTV, HVAC - Should be an ITI Certificate holder (Electrical) & PWD License required. - Should have an experience of 2 to 3 years in Utility Maintenance for Property or Floor.

JOB DESCRIPTION GENERAL PURPOSE OF THE POSITION The purpose of this post is to support the functioning of the installed utility equipment's of the sites and its smooth operations and supports other functions to carry OPS smoothly . The Cinemas to look fresh and well maintained. JOB FUNCTIONS To support the operation team & technical team in maintaining property facility services healthy. Monitoring and maintaining building safety covering fire alarm panel, extinguishers, sprinkler, fire hydrant system, electrical etc. at defined frequency. Should have sound knowledge of 3 phase electrical and UPS system and resolving the faults during emergency. Maintaining HVAC system, RO system, kitchen equipment, furniture & fixtures by executing preventive maintenance and ensuring breakdown free operations. Following preventive maintenance activities as per schedule which is daily, weekly, monthly and maintaining the service reports. Coordinate with OEMs/AMC vendors to get preventive maintenance completed as per the schedule. Maintaining and upkeeping all MEP services with complete building management. Controlling the services on daily basis and handling minor/major breakdowns with minimum breakdown time. 6. Should be able to work on basic excel on PC/Laptop. 7. Should be able to monitor the electricity/maintenance costs at site and generate and implement ideas to reduce the cost. 8. Inventory maintaining and control. Audi chairs maintaining and repairs. False ceiling repairs. Maintaining the stock register on daily basis & physical verification on weekly basis. 9.Should take care of all warranty cards/AMC details/ equipment details etc. documents. Should be able to developed local vendors for maintenance jobs and deal with centralized vendors as per site requirements. 10.Ensure regular training of team happen at cinema regarding equipment and safety as per SOP. DESIRE AGE 20-25 Years EDUCATION I.T.I Diploma Maintenance/ Electrical Experience in supervisory role Electrician/Technician. 3-5 Years

Job Title: MEP Engineer Work Location/Site: Bangalore Roles & Responsibilities: As part of the project management team and reporting to the Project Director, MEP Engineer is responsible for all aspects of the project relating to building services.The MEP engineer job description includes the management of the MEP Engineering team to ensure that the day-to-day duties are performed professionally and expeditiously to support the projects ongoing progress.The MEP team on site consists of the Lead Mechanical (MEP) Engineer, Electrical Engineer, and MEP Inspectors QUALIFICATIONS, EXPERIENCE & COMPETENCIES Mechanical or Electrical University degree in Engineering Working knowledge of plans, prints, specifications, and schematics associated with trade At least five years of construction experience with working knowledge of mechanical, Construction procedures and practices Computer literate Possess excellent communication and organizational skills Technical Knowledge Sound knowledge of Planning. Understanding the impact of construction. Knowledge in business development and business planning Kindly share your Written Acknowledgment for Further Proceedings and Share your Updated CV Thanks & Regards, Simran Value Innovation Labs Pvt. Ltd. simran@valueinnovationlabs.com| Cell: +91- 9289199512

We are seeking skilled PHE / Fire / HVAC Drafts people to join our MEP design team. The ideal candidate will be responsible for preparing detailed PHE / Fire / HVAC drawings and layouts using CAD and BIM software. They will work closely with engineers, designers, and project managers to ensure accurate and efficient design solutions for commercial, residential, and industrial projects. HVAC: Develop detailed HVAC system drawings, including ductwork, piping, and equipment layouts, using AutoCAD, Revit, or other drafting software. Interpret architectural and engineering blueprints to create precise and accurate designs. Coordinate with MEP engineers, architects, and other disciplines to integrate HVAC designs with plumbing, electrical, and structural systems. Assist in load calculations, equipment selection, and design modifications as per project requirements. Maintain drawing documentation, version control, and compliance with industry standards (ASHRAE, SMACNA, etc.). Revise drawings based on client feedback, engineering markups, and site conditions. Perform clash detection and coordination in BIM models to avoid conflicts between MEP services. Support project teams by providing technical details and drafting assistance as needed PHE / Fire: Develop detailed technical drawings and plans for PHE and fire protection using AutoCAD, Revit, or other drafting software. Prepare layouts for plumbing, drainage, rainwater harvesting, firefighting, and gas supply systems. Prepare layouts for fire sprinklers, fire hydrants, hose reels, and other fire suppression systems. Ensure designs comply with relevant local and international codes (e.g., NFPA, NBC, IPC). Create coordinated MEP drawings, integrating PHE/fire / HVAC services. Revise and update drawings based on client or regulatory feedback. Maintain accurate records of drawings and revisions for project documentation. Requirements: Diploma or degree in Mechanical Engineering, Civil Engineering, or a related field. 6+ years of experience in PHE and fire protection drafting within an MEP design firm. Proficiency in AutoCAD, Revit, and other drafting software. Understanding of HVAC, fire protection systems, plumbing, and public health engineering (PHE) concepts. Knowledge of relevant fire safety codes and standards (NFPA, NBC, IS codes, etc.). Strong attention to detail and problem-solving skills. Ability to work collaboratively in a team environment. Diploma or Degree in Mechanical/Civil Engineering or relevant discipline. Proficiency in AutoCAD, Revit MEP (preferred), and Navisworks. Strong knowledge of plumbing and fire protection systems, including codes and standards. Ability to read and interpret architectural, structural, and MEP drawings. Preferred Skills: Experience with Building Information Modelling (BIM) software. Familiarity with hydraulic calculations for fire suppression systems. Prior experience in PHE or MEP drafting

Job Summary : The Electrical MEP (Mechanical, Electrical, and Plumbing) Engineer is responsible for designing, implementing, and maintaining electrical systems within building projects. The role involves collaborating with multidisciplinary teams, ensuring compliance with local codes and regulations, and managing the electrical components of MEP systems in both commercial and residential settings. Key Responsibilities : Design and Planning : Develop electrical designs, layouts, and systems for MEP projects. Ensure all electrical systems meet the required codes and standards (local regulations, NFPA, NEC, etc.). Conduct load calculations and system analysis. Design electrical distribution systems, including panel boards, transformers, switchboards, and breakers. System Installation : Oversee the installation of electrical systems, ensuring they meet the design specifications. Supervise contractors and on-site personnel during construction, installation, and commissioning phases. Coordinate the integration of electrical systems with mechanical and plumbing components. Documentation & Reporting : Prepare technical drawings, schematics, and specifications for electrical systems. Document and maintain records of electrical system designs, calculations, and installation processes. Generate reports on system performance and operational status, ensuring compliance with all regulations. Testing and Commissioning : Conduct tests on electrical systems and components to ensure functionality and safety. Troubleshoot electrical issues and perform corrective actions as needed. Ensure systems are commissioned and handed over to the client in good working condition. Project Management : Provide technical support during the design and construction phases. Work closely with architects, mechanical engineers, and contractors to coordinate design and installation efforts. Manage project timelines, budgets, and resources. Health and Safety : Enforce strict adherence to safety standards in the design and installation of electrical systems. Ensure that electrical systems comply with OSHA and other safety regulations. Identify potential hazards and mitigate risks associated with electrical systems. Maintenance & Troubleshooting : Offer post-installation maintenance support. Troubleshoot and resolve electrical issues in the completed systems. Provide ongoing technical support and advise on system upgrades or modifications. Sustainability and Energy Efficiency : Implement energy-efficient solutions within electrical systems, incorporating renewable energy sources where applicable. Promote sustainability in design, ensuring reduced environmental impact. Qualifications : Education : Bachelors degree in Electrical Engineering or related field. Experience : Minimum of15-20 years of experience in electrical engineering, particularly in MEP systems (commercial, residential, or industrial). Certifications : Professional Engineer (PE) license is a plus. Note- Immediate joiner required Must have experience in Government Infra.

Designation - HVAC Technician Industry - Construction, Manufacturing Qualification - BE, Diploma, ITI Salary - 1500 to 2000 AED Experience - 1 to 3 years Visa type - Direct Employment Visa Location - Dubai, Ajman, UAE Contact - HR - 9962939100 Required Candidate profile Document's Carry for an Interview: 1.Resume 2.Original Passport 3.Degree Certificate 4.Passport size photo two copies 5.Experience Certificate Interested can call me for more details 9962939100 Perks and benefits Room and Cab facilities provided by company

CO ORDINATION OF PROJECTS , INTERIOR, PIPING, PLUBMING, FLOORING, AC, HVAC, ROOM, PAINING, WATER ,-CIVIL, INTERIOR PROJECTS, MAINTENANCE, EXECUTION, CO ORDINATION WITH VENDOR, SUPPLIER, CONTRACTORS, Required Candidate profile DIPLOMA/ DEGREE IN CIVIL WITH 10-120 YEARS EXP IN FIVE STAR HOTEL INTERIOR PROJECTS/ MAINTENANCE/ KNOWLEDGE OF MALAYALAM IS MUST , READY TO WORK IN KOCHI

Roles and Responsibilities Manage site engineering activities for Industrial MEP projects , ensuring timely completion within budget and quality standards. Oversee ETP (Effluent Treatment Plant), Gas Pipelines, Air Pipelines, Utilities infrastructure development Projects on Site. Oversee pipe line erection, Pipeline fabrication, Welding , Plumbing, HVAC Engineering , Electrical Engineering, Fire Protection Systems, and Utility Projects on Site. Ensure compliance with project specifications, codes, and regulations through effective Documentation Skills . Oversee complete Fire Protection System Projects is a must. The Site Engineer must independently source and manage site teams. Engineer should ready to work PAN INDIA , and Company will provide you Accommodation, Food and Travel Expense. Candidate must have 10-15 Years of experience in handling the MEP Projects in Industrial Background.

Role & responsibilities • Manage daily operations of plumbing systems, including water distribution, drainage, and sewage management, ensuring uninterrupted service across the facility. • Conduct regular inspections of plumbing infrastructure to identify potential issues and ensure all systems comply with safety and health regulations. • Develop and implement preventive maintenance schedules for plumbing fixtures, pipes, and drainage systems, minimizing downtime and preventing costly repairs. • Oversee the installation, maintenance, and repair of plumbing systems, coordinating with contractors and internal teams to meet project timelines and quality standards. • Monitor and control water usage and quality, ensuring compliance with regulatory standards and minimizing waste. • Manage inventory of plumbing supplies and replacement parts, placing orders as needed to maintain optimal stock levels. • Coordinate with vendors and service providers for specialized repairs or installations, negotiating terms to ensure high-quality service within budget. • Prepare and submit regular reports on plumbing system performance, highlighting issues, solutions, and recommendations for improvements. • Respond promptly to plumbing emergencies, working with maintenance teams to resolve issues and restore service efficiently. • Train and oversee junior technicians or staff members on safe handling and maintenance of plumbing systems. Requirements: • Diploma or Bachelors degree in Plumbing, Mechanical Engineering, or a related field. • At least 5 years of experience in facility management or plumbing operations. • In-depth knowledge of plumbing codes, water distribution, and drainage systems. • Strong problem-solving skills and attention to detail, with the ability to manage complex systems and troubleshoot issues effectively. • Excellent coordination and communication skills, capable of liaising with vendors, staff, and regulatory agencies.

Roles and Responsibilities Job Description Designing of HVAC systems for all types of buildings including load calculation, duct work and piping layout. Designing of Plumbing (domestic, sanitary-vent, storm) systems for all types of buildings Designing of Fire Protection systems for all types of buildings Designing of Medical gas system (Healthcare projects) Equipment selection for the above mentioned systems Specification editing Shop drawing reviews Control sequences, editing and writing along with the diagrams Energy modelling and LEED documentation Skills required: Candidates must have cleared all the subjects in one attempt. Good English communication is a must. Strong Technical Knowledge on the basic concepts of Engineering. Added Advantage: Knowledge/experience of HVAC load calculation and duct design Knowledge of Riser diagram and valves Basic Knowledge of other disciplines like electrical (power, lighting and fire alarm), structure and technology Software: HVAC used in KJWW : Trace 700 India market Trace 700 used in big companies AutoCAD/Revit knowledge is a benefit Education Qualification: BE/B.Tech in Mechanical Engineering (Note:-ME/M.Tech in Mechanical Engineering-Pursuing/Completed is not eligible) You can also share resumes on Deepanjali.B.Jena@imegcorp.com Perks and Benefits Best In the Industry

Planning of PHE & FPS works for Multistoried building and executing the job for 500 houses Installing and repairing water supplies, heating systems and drainage Installing and fixing domestic appliances like showers and washing machines Servicing air-conditioning and ventilation units Hot and cold water systems, Sanitation systems, Central heating pipe work. Scheduled maintenance, servicing, repairs and fault finding of all plumbing fixtures, fittings and pumps ensuring that all the equipment/fixtures are fully operational at all times. Plan & develops work schedules, procedures for plumbing systems & maintenance. Knowledge of installation of CPVC,PPR,PVC,HDPE&GI Fittings and installation of Pumps/Sanitary Ware/ C.P. Fittings Evaluate safety aspect of work and monitor the work as per the guideline given in procedures Monthly inspections of Tools and Tackles and other power tools&Equipments. Conduct daily pre use check of power tools and machinery before using it. Strict with PPE compliance. Key Responsibilities: All Buildings Are MIVAN SHUTTERING METHOD Responsible For Fire, PHE A/C shuttering Sleeve fixing as per Drawing. Preparing shop Drawing for discuss &water supply individuality, preparing invert levels sectional details shaft coordination for Site Engineers Project Management Consultants. Studying Architect Drawing & Details. Responsible for supervising the entire construction of external water supply, Drainage soil, Rain water system, storm water system, C.P Fittings &sanitary work. Responsible for supervising the entire construction of firefighting sprinkler & Hydrant line work. Completed Projects Role & responsibilities

Education:- ITI / Diploma in MEPF draughtsman ship Experience:- 2-7 years Approx. in HVAC design, drawings & 3d models in Revit. Software skills:- Revit MEP & AutoCAD is must Role:- Permanent Job Description:- Industrial projects experience is must in buildings like Warehouses, admin building, medical center, electrical buildings, and any other support facilities buildings. Ability to prepare HVAC & Plumbing layouts and sections and 3dmodel in detail in Revit software in different work sets. Ability to prepare Revit families on own for different types of valves or joineries etc.. as required in each project. Should be able to extract material schedules for all the materials for all these services mentioned. To prepare details for all these services under guidance of design engineer in Revit software. To prepare and calculate all materials for BOQ for all the services. To co-ordinate with other disciplines and gather inputs. Ability to handle multi – discipline projects. Practical understanding of structures, specifications, and details drawings for the buildings. Able to accept responsibility and complete the work assigned by engineer within the time frame.

Dubai-based reputed MEP Consultancy company wants to recruit Mechanical Engineer for its Mumbai office having exposure & expertise in handling projects like residential, commercial, Hospital villas & Hotel. Requirements: 1. Bachelors degree in Mechanical Engineering 2. Minimum 5-7 years of similar experience (preferably in Consultancy field). 3. Knowledge of local codes (NBC, ASHRAE, ISHRAE, CODES ETC.) 4. knowledge of HVAC design systems with all relevant calculation & system selection like DX,VRV, Chillers (Air cooled and water cooled) , Plumbing & Fire Fighting and AutoCAD. 5. Positive mindset. 6. Candidate Should have very good written and verbal communication skills in English. 7. Co-ordinate Mechanical layout with another services layout. Job responsibilities of the role: 1. Designing and developing mechanical HVAC engineering services like Airconditioning & Ventilation, Water supply, Drainage & Firefighting. 2. Manage Design Questionnaire, Space planning, Design basis/ concept report in consultation with Electrical counterpart. 3. Develop mechanical calculations, and Preparation of MOEF, support documents like calculation as per the Authority drawing & Equipment schedules. 4. Developing Specifications and BOQ of the same. 5. Apply technical knowledge to resolve the problems and willing to learn new skills. This position is responsible for assisting Senior Mechanical Design Engineers on various projects in development of design concepts, calculations, schemes and authority required documentations.

Job Summary: The Plumbing and Firefighting Engineer be responsible for designing and implementing comprehensive plumbing and firefighting systems for a variety of building projects. The role will involve collaborating with architects, structural engineers and other disciplines to develop efficient and effective design solutions that ensure health, safety and compliance with local standards and regulations Key Roles and Responsibilities: Responsibility for the overall design of Plumbing & fire protection systems & deliverables, including Concept Design, Schematic Design, Design Development, Tender Design / Documentation (including Technical Specifications, BOQ, Schedules and Drawings) Collaborate with architects, structural engineers, electrical engineers and other design professionals to ensure cohesive project planning and execution Experience in fire protection systems design of sprinklers, external and internal hydrant system, fire pump & tank systems design, hydraulic calculations Experience in design of water supply, sewerage and drainage system including necessary calculations. Design of comprehensive underground sewerage and storm water systems. Sizing and selecting of location for STP & water tanks. Detail drawing layout for internal & external water and drainage system Ability to design complete distribution systems to current legislation and codes of practice for various type of buildings based on client brief & guidelines Prepare comprehensive design documentation including drawings, calculations, technical specifications and reports Ability to work independently on various calculations and layouts/schematic mark-ups as per project requirements Understanding codes & standards local to project location and utilizing the latest & industry leading software Ability to independently create Plumbing & fire protection design mark-ups and perform calculations Track project progress and provide regular updates to project managers and stakeholders Qualification and Experience Required BE/BTech/ME/MTech degree in mechanical or civil engineering or a related technical field Minimum 2 years of experience in designing of Plumbing & Fire Protection systems for commercial, retail, hospital and residential projects Experience of having worked on AutoCAD for preparing Design layouts Experience of using MS Office

Role & responsibilities We Saini Electronics Security Systems are seeking a skilled AutoCAD Designer to join our team.Candidates from similar industry background - those who have worked on FAS/PAS/Access Control/ CCTV systems will be given first preference.The ideal candidate will have 2 to 3 years of experience in using AutoCAD software to create technical drawings and designs. Like Firefighting, Plumbing, CCTV, Fire Alarm Systems, Building Management system etc. This role offers the opportunity to contribute to exciting projects and collaborate with a talented team of professionals Responsibilities: Utilize Auto-CAD software to create detailed drawings according to project specifications. . (LV, Fire Protection & BMS Systems) Collaborate with engineers, Project manager and other stakeholders to understand project requirements and objectives. He/she should be well-versed with 2D Auto-Cad. Should be able to read, understand 3D drawing & convert them into 2D. Prepare and revise drawings, layouts, and diagrams as needed. Ensure that all drawings adhere to industry standards and regulations. (NFPA, NBC,TAC & IS Standard) Assist in the development of design concepts and solutions. Supervision of Projects. Prepare As Built Drawings. Maintain organized project files and documentation. Qualifications: Diploma in [Electronics/Electrical/Mechanical Engineering]/ ITI or related field. 2 to 3 years of experience as an AutoCAD Designer or similar role. Proficiency in AutoCAD software and other relevant design tools. Strong understanding of Electronics/Electrical/Mechanical principles and concepts. Excellent attention to detail and accuracy. Ability to work independently and as part of a team. Thanks & Regards,Anisha ShahHR Department 9920775114 E-mail your updated resume on careers@sainisystem.com

MEP Engineer Job Description: To review MEP drawings and specifications. Coordinate with architects, structural engineer, interior designer and landscape consultants. Provide technical advice to staff designer, supervisor, and contracting service provider regarding installation and maintenance of MEP system. Analyse mechanical, electrical, and plumbing engineering problems and formulate solutions. Plan, organize the review and evaluate the work of contractors, and others. MEP engineers should know MS Office, and construction project management software. Prepare and deliver effective oral presentations whenever required. Advise the Project Director of any technical aspects of the mechanical services that may affect construction progress, e.g., quality or snag. Continually review the contractor's construction schedule during the progress of the site works regarding MEP services and report to the project director on the same. Manage the day-to-day work of the MEP team for quality. In conjunction with the document controller, ensure that the filing / logging of the MEP documentation is undertaken in line with the project handbook and continually monitor the same. Take part in risk workshops and report any risks associated with MEP installations or general projects to the Project Director. Review the Contractor's installation method statements. Review Contractor's shop drawings against the design drawings for compliance with the design intent and return to Project Director with appropriate comments/approval within the specified contractual period. Review contractor's mechanical shop drawing in conjunction with the structural and electrical engineers to ensure engineering coordination and advise the Project Director accordingly. Where required, prepare technical clarifications to the tendered design to suit specific on-site construction and coordination issues. Review Contractor's mechanical services material proposals against specified technical performance requirements and advise the Project Director on the appropriateness of the recommendations. Job Specification: Degree / Diploma in Electrical Engineering 7 Years & above Relevant experience of MEP in High Rise Residential Projects

Designation: GET / Assistant Manager-Electrical Maintenance Function: Maintenance Location: Mumbai, Pune, Surat, Ahmedabad, Bangalore, Jaipur Education: Bachelor degree in Electrical engineering Experience: 0 to 7 years 1. Maintenance of HT/LT substation, DG/FAS/UPS/CCTV/HVAC & FF systems. 2. Plan and monitor preventive maintenance/Breakdown Maintenance/Predictive maintenance. 3. Manage Multiple sites. 4. Coordinate with vendors for PMS 5. Coordinate with operation dept for Major equipment maintenance. 6. Coordinate with the Back office team (GRN,Accounts) for payments related to vendors. 7. Troubleshoot Problems with stipulated time. 8. Root cause analysis of Breakdown equipments. 9. Verification and certification of bills according to work. 10. Testing and trial run of equipment (DY run Activity). 11. Ensure maximum availability of equipment by planning and scheduling of preventive and predictive maintenance. Interested candidates can share their updated resume to salomi.sai@dmartindia.com

Designation - MEP Technician Qualification - BE, Diploma, ITI - Mech, EEE Industry - Construction Salary - 1500 to 1800 AED Experience - 0 to 3 years Visa type - Direct Employment Visa Location - Dubai, Ajman, UAE Contact - HR - 9962939100 Required Candidate profile Document's Carry for an Interview: 1.Resume 2.Original Passport 3.Degree Certificate 4.Passport size photo two copies 5.Experience Certificate Interested can call me for more details 9962939100 Perks and benefits Room and Cab facilities provided by company

Responsibilities: Plumbing & Fire fighting Design Engineer For Design Of Building Sector. Desired profile of the candidate: Should be able to prepare design and detailed Plumbing and fire fighting drgs Schematics BOQ, technical specifications, technical data sheet Preparation of MEPF design basis report Cost estimation of plumbing and fire fighting BOQ items Knowledge in IS code, NBC, NFPA code etc. Should be able to design Plumbing and Firefighting system including Plumbing plans of building. Water supply and drainage plans. Basement drainage UGT & OHT Sleeve Fire fighting plans Pump room detailed plan Preparation of water flow schematic diagram for fire Protection and plumbing Should be able to independently lead Plumbing design with l DRAUGHTING team with proper inputs to prepare good quality and technically acceptable drgs. Work as Lead project coordinator for projects and well versed in verbal & written communication with adequate technical expertise. Working Knowledge of AutoCAD software is must and must be able to work in AutoCAD software by own hand. Should be able to check and approve shop drawings/site visit whenever required Coordination with other trades viz. HVAC, Fire-fighting and Plumbing for preparation of integrated MEP drgs and providing power requirements for mechanical loads. Should be able to do design calculations as under Plumbing water fixture calculation Plumbing & fire water piping sizing Design of STP, WTP, ETP plant Preparation of MEPF design basis report Plumbing & fire water calculations with Water balance chart preparation Plumbing and fire water pumping head and flow calculations Water demand and tank sizing. Should respond to clients requirement through mail and adhere to client timelines for deliverables. Prepare and update MIS reports and deliverables schedules. Resolve the RFI or comments raised by clients through mail or BIM 360 and provide proper reply on timely basis. Ensuring the timeliness of the deliverables as per company’s requirement and good understanding with client, without creating any bad impact to company’s reputation. Able to study architectural and Structural drgs and understanding the design intent and provide levels and floor and high level cutouts for electrical systems.

The person at this position would be responsible for attending all water supply lines, tanks, softener plants, fire pump etc related complains, do repairing and carry out timely preventive maintenance.

PHE & External Irrigation systems. Experience in Electrical Experience in High rise residential

Install, maintain, and repair plumbing systems-pipes, valves, pumps in WTP, STP, ETP plant. Perform inspections, preventive maintenance, and troubleshooting. Ensure safety and compliance, maintain records, and assist with emergency repairs as needed.

Designation - Pipe Fitter Qualification - Diploma / ITI Experience - 3 to 5 years Salary - 1200 to 1500 SAR + 200(Allowance) Visa Type - Work Visa Location - Saudi Arabia( 6 Month shutdown Project) Contact SAN - 7200255975 Required Candidate profile Candidate should bring all below documents! 1. Resume 2. Original Passport 3. Passport Size Photo-2 4. Educational document copy Candidates send your resume through whatsapp 7200255975 Perks and benefits Free accommodation and transportation

Designation -MEP Supervisor Qualification-Dip /BE - Mechanical & Electrical Experience - 3 to 5 years Location -Dubai Industry- Construction & Maintenance Salary - 2000 AED to 2500 AED +OT Accommodation & Transport Direct Employment SANA - 7358812683 Required Candidate profile Qualification - Dip/ BE - Mechanical & Electrical Industry- Construction/ Maintenance We are hiring MEP Supervisor DUBAI Documents Need 1.Resume 2.Original Passport 3.Photo-2 SANA - 7358812683 Perks and benefits Free Accommodation & Transport