6367 Calibration Jobs - Page 38

Qualification- ITI in Electrical/Diploma in electrical Experience Req.- 2-3 years of testing operator Freshers can also apply but ITI /Diploma in electrical seroius candidate Set up and operate CT/PT testing equipment: This includes connecting the equipment to the transformers, ensuring proper setup and calibration, and following safety procedures. Conduct various tests: These tests may include ratio, polarity, excitation, and burden tests, as well as winding resistance measurements. Analyze test results: Compare the readings with manufacturer specifications and industry standards to identify any discrepancies or deviations. Document and report findings: Record all test results, analyze the data, and report any issues or potential problems to the relevant personnel. Maintain testing equipment: Ensure the equipment is in good working order and calibrated regularly. Ensure safety: Follow all safety protocols and procedures to prevent accidents and injuries during testing. Troubleshoot and repair: Assist in troubleshooting and identifying the root cause of transformer issues and potentially perform minor repairs. Required Skills : Technical knowledge: Understanding of electrical principles, transformers (CTs and PTs), and testing equipment. Testing procedures: Knowledge of various CT/PT testing methods and procedures. Data analysis: Ability to analyze test results and identify deviations from acceptable standards. Troubleshooting skills: Ability to identify and troubleshoot issues with CT/PTs and testing equipment. Safety awareness: Understanding of safety procedures and protocols related to electrical testing. Attention to detail: Ability to perform tests accurately and meticulously. Communication skills: Ability to communicate findings clearly and effectively. Job Type: Full-time Pay: ₹14,000.00 - ₹16,000.00 per month Work Location: In person Application Deadline: 05/08/2025 Expected Start Date: 29/07/2025

Job brief. Develop and set up VMC machine programs to optimize production efficiency while maintaining quality standards and compliance with ISO 9001:2015. Responsibilities 1. Develop and optimize VMC machine programs 2. Set up VMC machines for production runs 3. Ensure ISO 9001:2015 compliance 4. Perform quality inspections related to VMC machining processes 5. Assist in troubleshooting and maintenance of VMC machines 6. Train machine operators on correct machine setup and operation 7. Coordinate with the Machine Shop Supervisor and other departments
8. Manage tooling inventory and maintenance schedules Requirements and skills 1. VMC Programming: Proficiency in VMC programming languages, such as G-code and M-code, to create machine instructions and tool paths for VMC machining operations. 2. Blueprint Reading and Interpretation: Ability to read and interpret engineering drawings, specifications, and geometric tolerances to understand the machining requirements. 3. CAD/CAM Software Proficiency: Experience with computer-aided design (CAD) and computer-aided manufacturing (CAM) software, such as SolidWorks, Mastercam, or Fusion 360, for creating and optimizing VMC programs. 4. VMC Machine Setup: Knowledge of VMC machine setup procedures, including workpiece and tooling setup, workholding methods, and fixture design specific to VMC machines. 5. Tool Selection and Optimization: Understanding of various cutting tools, their applications, and optimizing tool selection, feeds, speeds, and cutting parameters for efficient and accurate VMC machining. 6. Machine Calibration and Maintenance: Ability to perform VMC machine calibration, maintenance, and troubleshooting to ensure optimal performance and minimize downtime. 7. VMC Machining Techniques: In-depth knowledge of different VMC machining processes, such as milling, drilling, or tapping, and the associated techniques and best practices specific to VMC machines. 8. Measurement and Inspection: Proficiency in using precision measuring instruments, such as micrometers, calipers, and gauges, to perform dimensional measurements and ensure adherence to specifications. 9. Troubleshooting and Problem Solving: Strong analytical and problem-solving skills to identify and resolve issues related to VMC programming, machine setup, or machining processes. 10. Quality Control: Understanding of quality control procedures, inspection techniques, and the ability to ensure that machined parts meet required specifications and quality standards. 11. Safety Compliance: Knowledge of safety protocols and practices in VMC machining, ensuring adherence to safety regulations and promoting a safe working environment. 12. Documentation and Reporting: Ability to document VMC programs, process parameters, and production reports accurately for traceability and continuous improvement purposes. 13. Continuous Learning: Willingness to stay updated with advancements in VMC machining technologies, programming techniques, and industry best practices through self-study and professional development. 14. Communication and Collaboration: Effective communication skills to interact with engineers, machinists, and team members, providing clear instructions and collaborating on machining projects. 15. Time Management and Prioritization: Efficient management of time and priorities to meet production schedules, optimize machine utilization, and ensure timely completion of projects. 16. Adaptability and Flexibility: Ability to adapt to changing requirements, handle multiple tasks simultaneously, and work well under pressure in a dynamic manufacturing environment. 17. Teamwork: Capability to work collaboratively with other VMC programmers, setters, machinists, and cross-functional teams to achieve common production goals. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹40,000.00 per month Benefits: Food provided Paid sick time Provident Fund Schedule: Day shift Rotational shift Supplemental Pay: Yearly bonus Work Location: In person

· Install and commission car detailing machines (steamers, vacuum cleaners, pressure washers, polishers, etc.). · Set up lighting systems, electrical panels, and workstations as per studio layout. · Conduct routine preventive maintenance of studio equipment to avoid downtime. · Diagnose and troubleshoot machinery or infrastructure issues during or after setup. · Ensure correct calibration and safety compliance of machines. · Maintain tools, spares, and documentation for each site visit. · Train on-ground staff or franchise partners on basic operation and care of machines. · Submit visit reports and equipment status updates to the central team. · Support AMC (Annual Maintenance Contract) and service requests post-installation. · ITI / Diploma / Degree in Electrical, Mechanical, or Electronics Engineering. · 1–3 years of experience in equipment installation, field service, or technical support (experience in automotive or detailing industry is a plus). · Knowledge of electrical wiring, light fittings, and small machinery. · Ability to read technical drawings and wiring layouts. · Good problem-solving and diagnostic skills. · Physically fit and comfortable working in a fast-paced, hands-on environment. Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Willingness to travel: 25% (Preferred) Work Location: In person

Essential Functions: Operate and monitor equipment used in various stages of API production such as reactors, centrifuges, dryers, millers, sifters, etc. Ensure cleanliness and readiness of equipment before batch charging through visual verification procedures. Maintain accurate records, including Batch Manufacturing Record (BMR), Batch Cleaning Record (BCR), Batch Packing Record (BPR), equipment usage logs, and deviation reports. Execute batch operations strictly as per SOPs and GMP guidelines. Monitor and record process parameters in real-time to ensure adherence to specifications and quality. Report and coordinate with Engineering for any equipment breakdowns during the shift. Coordinate with QA for issuance and submission of documents and with the warehouse for material movement. Handle raw materials, intermediates, and APIs, ensuring proper storage, reconciliation, and documentation. Follow standard procedures for sampling and in-process testing of materials and intermediates. Maintain cleanliness and good housekeeping in the designated manufacturing area. Monitor utilities in the plant (e.g., steam, vacuum, chilled water) and report abnormalities. Monitor and record environmental conditions like temperature, humidity, and differential pressure in clean areas (Level-I, II, III). Perform daily verification and calibration checks of weighing balances. Participate in periodic equipment cleaning and preventive maintenance. Ensure proper handling and disposal of hazardous materials as per environmental guidelines. Identify process deviations, malfunctions, or quality concerns and report them immediately. Support continual improvement by suggesting ideas for optimization, efficiency, and waste reduction. Take mandatory safety and operational training via AIMS software and participate in hands-on skill-building sessions. Adhere strictly to safety practices and use PPE as per company safety protocols. Participate in emergency response activities such as managing spills or operational incidents. Ensure timely inventory of plant/process-related consumables. Review completed manufacturing records for accuracy, completeness, and compliance with SOPs. Additional Responsibilities: Support implementation of process improvement initiatives and lean manufacturing practices. Assist in the qualification and validation of equipment and processes as per regulatory and internal guidelines. Ensure readiness of the area for internal, external, and regulatory audits. Support investigation and documentation of deviations, change controls, and CAPAs in coordination with QA. Participate in cross-functional meetings to discuss production schedules, quality concerns, and improvement plans. Maintain discipline and GMP compliance on the shop floor and promote a culture of accountability. Train and mentor junior staff/operators on standard procedures and safe working practices. Assist in preparation and review of SOPs related to manufacturing activities. Support periodic review of equipment performance and suggest improvements for efficiency. Ensure adherence to environmental and safety norms in chemical handling and waste disposal. Actively participate in safety drills, risk assessments (HIRA), and incident investigations. Coordinate with stores for timely availability of raw materials, consumables, and packing materials. Report daily production updates to the shift in-charge or supervisor as required. Qualifications :- Education: Master Degree, M. Sc – Organic Chemistry - Preferred Bachelor Degree, B. Pharma – Preferred B.E. Chemical – Required B. Tech Chemical – Required Experience: 4 to 6 years in API/Intermediate manufacturing operations Skills: API Manufacturing Operations – Intermediate to Advanced Batch Documentation (BMR/BCR/BPR) – Intermediate GMP Compliance and Data Integrity – Intermediate Process Monitoring and Troubleshooting – Intermediate SOP Adherence and Equipment Operation – Intermediate Safety and Emergency Response – Intermediate Material Handling & Inventory Control – Basic to Intermediate Utilities & Cleanroom Parameter Monitoring – Basic Team Coordination and Communication – Intermediate. Qualifications :- Education: Master Degree, M. Sc – Organic Chemistry - Preferred Bachelor Degree, B. Pharma – Preferred B.E. Chemical – Required B. Tech Chemical – Required Experience: 2 to 5 years in API/Intermediate manufacturing operations

Bachelor's degree in chemistry Educational Qualification: M. Pharm (Q.A.) Experience: 4 to 6 years in pharma API Plant. Candidate should be fluent in English language. Define and implement QA policies, processes, and standards to ensure high-quality deliverables. Identify test scenarios and design test cases based on requirements and technical specifications. Assign tasks, monitor progress, and ensure timely completion of testing activities. Analyze QA processes to identify inefficiencies and recommend improvements. Quality audit, ISO, Production, GMP, HPLC, QC, GMS, Raw material, Calibration, E mail, Inspection, Finished goods, Stores, Documentation Etc. Job Type: Full-time Pay: ₹380,000.00 - ₹420,000.00 per year Benefits: Health insurance Leave encashment Provident Fund Education: Bachelor's (Preferred) Experience: QA: 4 years (Preferred) Language: English (Required)

Description: Plan, procure, evaluate, and control inventories of raw materials and packaging materials in line with production requirements. Coordinate with the Purchase department to ensure timely availability of materials. Coordinate with Quality Control for timely release of materials as per production schedule. Prepare, review, and implement departmental SOPs. Train subordinates on departmental SOPs and updates. Ensure strict adherence to SOPs and cGMP during warehouse operations. Prepare and submit MIS reports as required. Verify and maintain the integrity of all cGMP and statutory records. Ensure receipt, storage, and dispensing of materials are carried out per defined procedures, with reference to relevant MSDS and safety requirements. Oversee proper return or destruction of rejected materials in compliance with procedures and MSDS guidelines. Ensure weighing balances are verified and calibrated per SOPs. Maintain environmental conditions of designated storage and dispensing areas as per SOP. Coordinate with the Engineering department to execute preventive maintenance of departmental equipment. Ensure calibration of standard weights, balances, and instruments is done before the due date. Enforce safety protocols and ensure all team members follow defined safety measures during operations. Monitor receipt, storage, and issuance of engineering and miscellaneous materials as per SOPs. Prepare and review equipment qualification protocols and reports in collaboration with the Engineering department. Assist in conducting qualification studies and temperature mapping protocols. Ensure timely dispatch of finished goods to customers with proper documentation. Maintain overall housekeeping and upkeep of warehouse areas. Lead and coordinate change controls, deviations, and ensure timely closure. Represent the department during audits and ensure prompt compliance with audit observations. Essential Functions: Warehouse QMS-related activities Dispensing of materials as per production plan Dispatch of materials as per plan Additional Responsibilities: Raise material/service indents and prepare Capex proposals as needed. Manage departmental inventory effectively. Attend technical workshops/seminars and explore new techniques and technologies relevant to the warehouse function. Qualifications : Education: B.Sc. / B. Pharma – Preferred B.Com or equivalent – Acceptable Experience: 10–12 years of relevant experience in warehouse and distribution, preferably in a pharmaceutical or regulated industry. Skills: Documentation & Data Review Interpretation & Statistical Analysis Strong knowledge of cGMP, SOPs, and warehouse compliance systems Good communication and coordination abilities across departments Qualifications : Education: B.Sc. / B. Pharma – Preferred B.Com or equivalent – Acceptable Experience: 10–12 years of relevant experience in warehouse and distribution, preferably in a pharmaceutical or regulated industry.

Title: Officer - Production Date: Jul 28, 2025 Location: Dahej - Production Company: Sun Pharmaceutical Industries Ltd Sun Pharmaceutical Industries Ltd. Position: Senior Officer Production Grade: G12B Location: API – Dahej Location Taking charge from previous shift by checking BMR and status of plant/ batches for operation in shift. To ensure that status of other activity is as per log report while taking charge from Outgoing officer. During shift to ensure that GMP norms are strictly followed and to report superior in Case of any deviation understood. During shift ensure that follows process parameter as per BMR, if any deviation observed, than immediately corrective action 10 be taken and such deviation to be Documented and informed to reporting authority. Co-ordinate with service dept. like Eng. QC, store, etc. to ensure uninterrupted Services activate. Calibration and verification of weighing balance. Raw materials receipt from store by checking MRO and verifying with all containers of raw material dispensed to the batch numbers. Solid and process waste transfer to respective area and record maintaining. Other activities entrusted from time to time Differential pressure monitoring, Temperature or humidity, equipment occupancy Record. Housekeeping maintaining/ get cleaned by respective person.

About Apotex Inc. Apotex is a Canadian-based global health company. We improve everyday access to affordable, innovative medicines and health products for millions of people worldwide, with a broad portfolio of generic, biosimilar, innovative branded pharmaceuticals and consumer health products. Headquartered in Toronto, with regional offices globally, including in the United States, Mexico and India, we are the largest Canadian-based pharmaceutical company and a health partner of choice for the Americas for pharmaceutical licensing and product acquisitions. For more information visit: www.apotex.com . Job Summary Storage and Dispensing of Packaging Materials. Job Responsibilities Supervise the PM sampling activities at LVMP as per the plan and arrange the material for Sampling. Dispensing of Packaging materials as per LVMP production plan as per standard operating procedure. Ensure the storage of packaging materials as per cGMP. Ensure the online documentation related to LVMP packaging material warehouse on daily basis. Phisical stock verification (Cycle counting) and update the stock in SAP. Maintain safety and good housekeeping practices at work place. Ensure the cleaning activities in working area / equipment and updated the logbboks online. Store in and Store out of materials in ASRS – WMS system. Calibration of Roll Label Counting Machine as per standard operating procedure. Daily monitoring and recording of Temperature / relative humidity in working area. Performing calibration activity of weighing balance (daily and Fortnightly). To maintain the online documentation related to Warehouse activities on daily basis. Works in a safe mannar collaborating as a team member to achive all outcomes. Demonstrate behaviours thst exhibit our organizational Values: Collaboration, Courage, Perseverance and Passion. Continuous Up gradation of knowledge with respect to cGMP and regulatory guidelines. Performance all work in support of our Corporate Values of Collaboration, Courage, Perseverance and passion. Demonstrates strong and visible support of our values. Ensure personal adherence with all complaines programs including the Global Business Ethicsand compliance program, Global quality policies and procedures, Safety and Environment policies and HR policies. All other relevant duties as assigned. Job Requirements Education B.Com Knowledge, Skills and Abilities:- Good knowledge in MS office, SAP and ASRS Operations. Maintains good Interpersonal skills and communication skills. Flexible to work. Experience:- 11+years of experience in GMP regulatory industry. At Apotex, we are committed to fostering a welcoming andaccessible work environment, where all everyone feels valued, respected, and supported to succeed. We offer accommodation for applicants with disabilities as part of its recruitment process. If you are contacted to arrange for an interview or testing, please advise us if you require an accommodation.

Company Description At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work. Job Description JR for New recruitment Relevant experience in EOT Crane installation & Commissioning Maintain safety standards at Site as per company policy Site Engr. Should follow all the Site operation processes & maintain the same Technical discussion supporting for New Orders by regional sales managers & site visit whenever required Visit to Site for Site assessment & share the site updates in precise format Based on site urgency, need to travel on immediate basis as & when required Affiliate performance validation after every 3 months Handle the site individually with affiliate team so need to take ownership while executing the work Financial & company target to be adhered without compromise on Safety Site Visits for critical project for Site assessment whenever required also visit for big size projects If any issues related with Site execution, Technical then immediately align the Teams call with all Members as well Notification to be raised Regularly review the NC & shortage material update with manager for swift closure Close Track of Snag points within the agreed time frame to get the clearance for raising the Erection invoice. As per site requirement, need to travel another region whenever required Ensure positive feedback on VOC whenever required ( Project wise ) HOC data sharing with IS Team and warranty handling team once crane handover to customer Individual Tools Calibration & Maintaining the same for ISO audits HOC punctuality - Complete the Crane as per plan / agreed timeline SAT issue to be taken up with Tech support to avoid repetition in future ISO Audits & Monitoring all HSE Related Documentation on Team site regularly Support customer for under warranty cases whenever IS Team is occupied Customer focused with ready for Emergency travelling Handling Export orders execution / supervision whenever needed Would be leading / representing the affiliate team at site Awareness of ISO 14001 and 45001 standards Additional Information Konecranes moves what matters . We are a global leader in material handling solutions, serving a broad range of customers across multiple industries. We consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. That's why, with 16 000+ professionals in over 50 countries, we are trusted every day to lift, handle and move what the world needs. Konecranes is committed to ensuring that all employees and job applicants are treated fairly in an environment which is free from any form of discrimination.

Collect blood, urine, and other specimens from patients as per protocol Perform routine and specialized lab tests (Hematology, Biochemistry, Microbiology, etc.) Operate and maintain lab equipment with accuracy and care Follow infection control and biosafety guidelines at all times Ensure proper labeling, storage, and disposal of samples Maintain patient records, lab registers, and digital reports accurately Ensure calibration and quality control of diagnostic equipment Assist in preparing daily reports and sharing timely test results Maintain cleanliness and hygiene of the laboratory area Coordinate with doctors, phlebotomists, and other departments as needed Qualifications & Skills: Education: DMLT / BMLT / MLT or equivalent from a recognized institute Experience: 1 to 3 years of experience in a diagnostic lab or hospital preferred Valid Paramedical Council / Medical Lab Technician Registration (if applicable) Strong knowledge of pathology lab processes and equipment Attention to detail and accuracy in test handling and documentation Good communication and interpersonal skills Willingness to work in shifts (if required) Job Types: Full-time, Permanent Pay: ₹10,000.00 - ₹30,000.00 per month Work Location: In person

Company Description Lal Sweets is a trusted and growing name in the Indian sweets and snacks industry, known for its commitment to quality, tradition, and innovation . With roots in Karnataka, Lal Sweets specializes in producing authentic Indian sweets like Mysore Pak , Dodha Burfi , Gulab Jamun , and other traditional delicacies — combining the richness of Indian heritage with the efficiency of modern food processing. We are an FSSAI-certified and ISO-compliant company, ensuring that every product meets high standards of hygiene, safety, and taste . Our sweets are crafted in pure vegetarian facilities , using premium ingredients like ghee, milk solids, dry fruits, and natural flavors. With a strong presence in both retail and institutional markets , Lal Sweets is expanding across India and internationally — bringing the taste of tradition to modern consumers. Role Description This is a full-time on-site role for a Quality Control Executive located in Bengaluru. The Quality Control Executive will be responsible for performing quality control tests, ensuring compliance with quality assurance standards, and maintaining accurate laboratory records. Day-to-day tasks will include calibrating equipment, analyzing test results, identifying any deviations from standards, and implementing corrective actions. The position requires coordination with various departments to maintain high-quality standards across all processes and products. Qualifications Strong Analytical Skills and ability to interpret data Proficiency in Quality Control and Quality Assurance practices Laboratory Skills, including familiarity with laboratory equipment and procedures Experience with Calibration and maintaining calibration records Excellent attention to detail and organizational skills Ability to work independently and as part of a team Bachelor's degree in Chemistry, Biology, or related field Experience in a manufacturing or laboratory environment is a plus

Job Description: About Us: At Bank of America, we are guided by a common purpose to help make financial lives better through the power of every connection. Responsible Growth is how we run our company and how we deliver for our clients, teammates, communities, and shareholders every day. One of the keys to driving Responsible Growth is being a great place to work for our teammates around the world. We’re devoted to being a diverse and inclusive workplace for everyone. We hire individuals with a broad range of backgrounds and experiences and invest heavily in our teammates and their families by offering competitive benefits to support their physical, emotional, and financial well-being. Bank of America believes both in the importance of working together and offering flexibility to our employees. We use a multi-faceted approach for flexibility, depending on the various roles in our organization. Working at Bank of America will give you a great career with opportunities to learn, grow and make an impact, along with the power to make a difference. Join us! Global Business Services Global Business Services delivers Technology and Operations capabilities to Lines of Business and Staff Support Functions of Bank of America through a centrally managed, globally integrated delivery model and globally resilient operations. Global Business Services is recognized for flawless execution, sound risk management, operational resiliency, operational excellence, and innovation. In India, we are present in five locations and operate as BA Continuum India Private Limited (BACI), a non-banking subsidiary of Bank of America Corporation and the operating company for India operations of Global Business Services. Process Overview: This role is part of Enterprise Independent Testing – Global Banking. Testing team performs post facto testing on transactions completed by Trade Operations to identify errors and potential gaps that may result in operational, reputational and compliance risk to the Bank. Job Description: Responsible for ensuring a product or service meets the established standards of quality. Be a Subject Matter Expert in Global Trade Operations Ensure Audit Readiness – Ensure Test script and other governance documents are updated timely and accurately whenever there are any process changes in the business. Change Management - Ensure timely communication & planning for proposed changes with appropriate documentation to ensure calibration with Project Team Take complete accountability & ownership for testing and recommend new controls / remediation plan based on the findings. Stakeholder Management – Effective communication with stakeholders that includes LOB partners and Test Owners on updates and issues related to testing. Follow the right channels to escalate the issues on the timely basis. Good understanding of excel and power-point to perform data analysis and showcase the business story. Should be able to identify potential risk and gaps in the process and implement controls for mitigation. Flexible/nimble to be cross trained across other business areas and function as a domain agnostic Testing specialist. Support the team with subject matter expertise. Responsibilities: Perform sampling and independent testing of Trade transactions as per the test script. Conduct routines / liaise with stakeholders on process updates and potential issues. Support governance routines e.g test script changes, reversals, QA etc. Organize and support training programs for team. Ensure business KPIs are met. Identify ideas to generate efficiency in the process. Requirements: Education: MBA from a reputed institute/ Chartered Accountant CDCS Certification preferred. Experience Range: 7 to 10 years of overall experience in Global Trade operations Foundational Skills: Knowledge of US regulations such as UCP, URR, ISBP, etc. Organized and able to multi-task in a fast-paced environment Effective stakeholder management including senior leadership. Self-starter, organized, versatile, capable of performing work independently with minimal direction. Ability to think independently, solve complex problems, and suggest solutions. In-depth knowledge of Trade cycle and Trade products – Export, import, Guarantees, LCs etc. Shift Timings: 11:30 hrs to 20.30 hrs Location: HYD

S.no Role Indicative Activities 1 Ensure Safety of Mixer, Calender and Extruder Equipments Loss Time Incident (LTI)/First Aid/Near Miss Monitor LTI / First aid / Near Miss cases and ensure closure of safety abnormality points Safety - Ensure Root cause analysis is done and Plan Corrective Action and Preventive Action (CAPA) Arrange Resources / PR followup / Follow up with Purchase for PO/ Material followup /Manpower arrangement & Execution of identified points (Lock-out Tag-out) LOTO Ensure Compliance of LOTO and corrective action against deviation Health Safety Environment Engineering (HSEE)/Auto Safety Checks Ensure completion of HSEE Ensure completion of Auto Safety Check projects Mandatory Safety Release (MSR) Projects Ensure Ontime completion of engineering related MSR Projects Adherence to Management of Change(MOC), Job Safety Analysis(JSA),Facility Management System (FMS),Hazard Identification and Risk Assessment (HIRA), Personal Protective Equipment (PPE), Safety SOP guidelines 2 Ensure effective Maintenance of Mixing,Calender & Extruder Machines Breakdown Maintenance Monitor Previous day machine downtime and occurrence Conduct Root cause analysis (Why Why Analysis) and ensure counter measures are planned for repeated and Major Breakdown and thereby reduce Breakdown percentage of all equipments Monitor Meam Time To Repair (MTTR) & Mean Time Before Failure (MTBF) and ensure MTTR Reduction & MTBF improvement by reducing Breakdown occurences and Downtime Ensure Uptime improvement of Critical equipment Preventive Maintenance (PM) Ensure PM Compliance (CMMS), followup with team as per the schedule and identify the gaps in PM compliance and ensure 100% Compliance of PM Identify obsolete Mixer, Calender & Extruder components and ensure migration planned Identify Electrical abnormalities through periodical audits and initiate correction Allocate Job to technician, if machine released for PM Shutdown Maintenance Plan Mixing, Calender & Extruder Shutdown job, Arrange resources, Follow up PR & PO, Ensure safety and completion of planned jobs Ensure smooth startup of equipments after Plant shutdown Predictive Maintenance - Based on life cycle or manufacturer's recommendation on component replacement ,ensure replacement is planned for parts or consumable Conditioned Based Maintenance - Based on condition monitoring of component ,ensure replacement planned for parts or consumable planned Spares Management Ensure availability of the critical spares by verifying the checklist Followup Purchase for PR to PO conversion and material requirement Follow up of pending PR 3 Ensure Cost efficiency in Mixer, Calender and Extruder machines Energy Conservation Monitor area Specific power consumption Identify higher consumption areas, analyse reason and take corrective measures Discuss with Team for Energy saving potentials and identify projects by brainstroming Ensure resources are arranged for Energy saving activities, getting Budget, PR & PO made on time and jobs executed as per plan Ensure Existing Energy saving activities are going on track and expedite progress (Plan Vs Actual) Spare/ Repair & maintenance (R&M) cost reduction Monitor Preparatory Spares, Service, R&M cost and ensure control as per the budget Identify high consumption spares , analyse the reason and ensure adequate measures are taken for reduction Identify high value spares & look for low cost alternative Manpower cost Monitor Man power deployment, ensure compliance are met as per target and initiate corrective action against Deviation Localisation of Spares Identify scope for localisation of OE EEI spares 4 Ensure Completion of Projects on time Ensure 100% execution of Capex projects Ensure Capex Projects identification, making justification and getting approval Ensure Machine Upgradation for Process/ Quality/Productivity/Safety as per the Management requirement 5 Ensure implementation of TPM,TQM 5 S, & Systems TPM & TQM Ensure Reduction of Breakdown , MTBF improvement, MTTR reduction, Energy and Spare cost reduction through PM pillar and also closing of JH activities -Redtags, Source of Contamination (SOC) & Hard To Access (HTA) Ensure employee involvement in Idea/ CFT/Kaizen/projects Implement Kaizens Identify one QCC Project and Implementation to Improve Employee Engagement 5S Ensure 5S improvement in Maintenance department and support other departments for the same Training Monitor Skill development , ensure training needs are identified and Training Calender prepared Arrange Internal and External Training and Monitor Plan Vs Actual chart Systems/Audit Coordinate IMS Internal audit and followup with team for Completion of OFI & NC 6 Ensure Legal Compliance Ensure the calibration of loadcell as per the schedule

Job Title : Head – Quality Control (QC) Department : Quality Assurance / Quality Control Location : Atlas Transformers India Limited (Por,GIDC) Reports To : Plant Head / General Manager / Director – Operations Industry : Transformer Manufacturing – Power & Distribution Job Summary The Head of Quality Control (QC) is a senior leadership role responsible for overseeing all quality control activities across the transformer manufacturing process. This includes ensuring that raw materials, in-process components, and finished transformers meet all customer requirements, international standards (IEC, IEEE, ANSI, IS), and regulatory norms. The QC Head leads the quality team in implementing inspection protocols, managing customer and third-party inspections, reducing internal rejections, and driving continuous improvement. The role plays a vital part in safeguarding product integrity, customer satisfaction, and the company’s reputation for high-performance transformer solutions. Key Responsibilities Quality Control Strategy & Leadership: Develop and implement the overall QC strategy aligned with company goals and industry best practices. Lead, manage, and mentor the entire QC team including inspectors, engineers, and test personnel. Establish and continuously improve QC procedures, inspection plans, and quality benchmarks. Inspection and Testing Oversight: Supervise and approve incoming material inspection (e.g., core, copper/aluminum conductors, insulation, bushings, tap changers). Oversee in-process quality control across all stages—winding, core assembly, insulation, tanking, oil filling, and final assembly. Ensure routine, type, and special tests (as per IEC/IS/ANSI/IEEE) are conducted as per prescribed norms and accurately documented. Ensure calibration and upkeep of all test equipment and measuring instruments. Customer and Third-Party Interfacing: Coordinate with customers and third-party inspection agencies (e.g., BHEL, NTPC, DNV, TUV, SGS) for inspections, clarifications, and approvals. Manage Factory Acceptance Testing (FAT) and respond to customer feedback, deviations, or NCs (non-conformities). Ensure timely preparation and delivery of quality documentation (test certificates, inspection reports, etc.). Compliance & Documentation: Ensure all quality processes comply with ISO 9001, ISO 14001, ISO 45001, and other applicable standards. Maintain updated quality control records, internal audit reports, NCR reports, and corrective action plans. Drive certification, audit readiness, and regulatory compliance across operations. Root Cause Analysis & Corrective Action: Lead investigations into product failures, customer complaints, and internal quality issues using tools such as 8D, 5 Why, and Fishbone diagrams. Implement preventive and corrective actions to eliminate recurrence. Monitor quality KPIs such as rejection rates, rework cost, warranty claims, and customer complaints. Process Improvement & Quality Culture: Promote a culture of quality across the organization with emphasis on first-time-right practices. Work with Production, Design, and Supply Chain teams to improve product and process quality. Lead initiatives like Six Sigma, Lean, 5S, Kaizen, and poka-yoke systems to drive continuous improvement. Team Development & Capacity Building: Build and develop a skilled QC team through training, mentoring, and performance reviews. Conduct regular workshops on quality awareness, standard updates, and inspection practices. Evaluate and improve the competency of team members across various inspection and test areas. Required Qualifications Education: B.E. / B.Tech in Electrical, Mechanical, or Production Engineering Experience: 10–20 years of experience in transformer manufacturing industry, with at least 5 years in a senior QC or quality leadership role Certifications: ISO 9001:2015 Lead Auditor (preferred) Knowledge of ISO 14001 and ISO 45001 Six Sigma or Lean certifications are an advantage Technical Skills Thorough knowledge of power and distribution transformer manufacturing and testing processes Familiarity with international standards: IEC 60076, IS 2026, ANSI/IEEE C57 series Proficiency in interpreting electrical and mechanical drawings Experience in high-voltage testing, insulation coordination, and failure mode analysis Strong command over inspection tools, instruments, gauges, and test rigs Working knowledge of ERP systems (SAP/Oracle), MS Office, and QC data analysis tools Key Competencies Strong leadership and team management skills High attention to detail and commitment to quality excellence Problem-solving and root cause analysis expertise Effective communication and customer interfacing capabilities Strategic thinking and process orientation Decision-making under pressure Working Conditions Based in factory or plant environment with frequent floor walkdowns and lab presence Occasional travel to customer locations or supplier sites for audits or technical support May require extended working hours during audits, inspections, or critical projects Key Deliverables / KPIs Product acceptance rate and customer satisfaction Internal rejection and rework cost reduction Zero non-conformance during external audits Timely closure of NCRs and CAPAs On-time delivery of inspection reports and quality certificates Skills: six sigma,root cause analysis,continuous improvement,inspection protocols,mechanical engineering,erp systems,iso standards,leadership,quality control,electrical engineering,transformer,lean,qc data analysis

About the Role We are seeking an experienced Computer Vision Engineer to join our team and contribute to cutting-edge projects in 3D vision and reconstruction. The ideal candidate will have a strong background in camera calibration, stereo vision, multi-view geometry, and 3D reconstruction techniques. Key Responsibilities ● Develop and implement advanced computer vision algorithms for 3D reconstruction and analysis ● Design and optimize camera calibration procedures for various imaging systems ● Create robust stereo vision solutions for depth estimation and object localization ● Implement multi-view geometry techniques for scene understanding and 3D modeling ● Develop efficient triangulation methods for 3D point cloud generation ● Collaborate with cross-functional teams to integrate computer vision solutions into larger systems ● Stay current with the latest advancements in computer vision and contribute to research initiatives  Required Qualifications ● Bachelors in Computer Science, Computer Engineering, or a related field ● 3+ years of experience in computer vision, with a focus on 3D vision techniques ● Strong proficiency in camera calibration methods and tools ● Extensive experience with stereo vision algorithms and epipolar geometry ● In-depth knowledge of multi-view geometry and structure-from-motion techniques ● Proven track record in developing 3D reconstruction pipelines ● Expert-level programming skills in C++ and Python ● Experience with OpenCV, PCL, or similar computer vision libraries ● Familiarity with deep learning frameworks (e.g., TensorFlow, PyTorch) for vision tasks

We are #hiring Quality Control - Executive for our manufacturing units VPL Chemicals and Symbio Unit 2 located in Dabaspet and Tumkur respectively. Job Description 1. Testing of raw materials, in-process samples, finished products as per SOP/STP. 2. Calibration of QC Lab instruments. 3. Identifying the chemicals testing requirements for testing of samples on regular basis plan for procurement of chemicals, standards and glassware. 4. Preparation qualification of in-house working standards and review of validity of reference standards and impurities as per Pharmacopoeia. 5. Upkeep of calibration records, working standards records and timely completion of log books in line with audit requirements. 6. Testing of excipients, Enzyme samples, Process development samples. 7. Preparation of Spec/STP/SOP revisions as per TT documents and product monograph requirements. 8. Hands on experience on testing of APIs, formulations and Dissolution apparatus etc. 9. Preparation of MV protocols / reports, execution summary as per guidelines.

Urgent Openings in Vizag Leading BPO VNA Trainer//Soft Skills Trainer//Communication Trainer Require Excellent Communication Skills CTC UPTO 7LPA based on Last CTC Shifts 24*7 Require minimum 6 months Experience as VNA Trainer/Communication Trainer Role and Key Responsibilities: • Partner with Front Line Recruitment Teams to evaluate the quality of new hires and ensure alignment with operational standards. • Conduct comprehensive audits of calls, e-mails, and chats to ensure adherence to quality standards and operational guidelines. • Design and deliver refresher training programs in English, tailored to meet specific needs and operational requirements. • Innovate training materials by integrating floor requirements and best practices into the training curriculum. • Maintain accurate data and MIS as per training BPMS requirements and provide insightful reports on training progress and outcomes. • Foster intra- and inter-function collaboration to support seamless training and operational processes. • Proactively implement best practices and contribute to value addition across multiple locations. • Attend and successfully complete the mandatory Train-The-Trainer (TTT) program. • Interact with customers as required to gather feedback and address training-related queries. • Conduct training needs analysis (TNA) and provide actionable feedback to stakeholders to drive continuous improvement. • Achieve monthly conversion and effectiveness targets, ensuring measurable improvements in training outcomes. • Provide constructive feedback to new hires on soft skills, basic grammar, and voice modulation. • Mentor and support new trainers to enhance their effectiveness and integration into the training team. • Participate in the calibration process for trainers, QAs, and other Voice Coaches, both within the team and with the TTBU training team. • Analyze and report training batch performance, identifying areas for improvement and implementing corrective actions. • Conduct refresher training based on TNA, ensuring all sessions are executed and closed effectively each month. • Meet the training needs of the Business Unit based on TNA and collaborate with training teams to design and develop training processes from need identification to feedback and follow-through. • Monitor and report improvements, ensuring training initiatives drive positive changes and meet established goals. Key skills & knowledge: • Exceptional verbal and written communication skills in English. • Strong facilitation and presentation skills with a proven ability to engage and motivate participants. • Proficient in data handling, interpretation, and management. • Advanced knowledge of MS Office (Excel, PowerPoint) and other relevant computer applications. • Excellent people management and interpersonal skills, with a demonstrated ability to build and maintain effective relationships. • Strong organizational and time management skills, with the ability to handle multiple tasks and priorities effectively. Interested candidates can share their resume at simmi@hiresquad.in or call at 8467054123

We are seeking a skilled and experienced RF Calibration Engineer with hands-on expertise in Qualcomm cellular platform to lead and execute RF calibration activities including RFC card generation, QCN/XQCN handling, and RF tuning. The candidate will play a critical role in ensuring optimal RF performance across LTE, GPS, Wi-Fi, and Bluetooth subsystems. Areas Of Responsibility Perform RF calibration for cellular platforms based on Qualcomm SoCs (e.g., QCM, QCS, SA2150, SA415M, SDX series, QCX series) Generate and update RFC (Radio Frequency Configuration) cards for factory and production use Handle QCN/XQCN backup, editing, and restoration for RF parameter tuning Conduct calibration procedures using Qualcomm toolchain: QPST, QXDM, QDART, QCAT, and QMSL Analyze and debug RF logs, NV configurations, and RF signal performance Coordinate with hardware and modem teams to optimize antenna and RF path Support EFS/NV management , RF provisioning, and board-level bring-up Automate repetitive tasks using Python/Perl scripts for efficiency in calibration and flashing Maintain documentation and traceability for RF performance and test results Experience and Qualification Experience: 5 to 10 yrs Solid hands-on experience with Qualcomm RF calibration tools and procedures Experience with multiple Qualcomm chipsets (e.g., QCM2290, QCS2290, QCX216, SA415M, SDX55, etc.) Deep understanding of LTE/4G/5G, GNSS, Bluetooth, and Wi-Fi RF subsystems Familiarity with NV item editing, eFuse programming, and RF tuning principles Strong background in wireless testing, calibration lab tools, and scripting automation Bachelor's or Master's degree in Electronics, Telecommunications, or relevant discipline Qualifications: Prior experience with mass production RF calibration and automation Exposure to carrier certification (PTCRB, GCF, operator-specific requirements) Familiarity with SAR/TRP/TIS testing , antenna design, and tuning practices Knowledge of eSIM/eUICC , security provisioning, and factory test flows Experience with Qualcomm’s Diag protocol , QCN tools , and RF trace analysis Technical And Behavioural Skills Technical Skills : Qualcomm Tools & Platforms: QXDM – Log capture, RF trace analysis, event monitoring QPST/QFIL – EFS access, QCN flashing, QPST server tools QCAT – Log post-processing and NV item analysis QDART – RF calibration and automation interface QMSL (Qualcomm Modem Software Library) – Used for scripting RF calibration routines RFNV Tool / QCN Manager / NV Manager – NV editing and configuration RF Card Tool / RFC Generator – RFC card creation, editing, and validation eFUSE Tools – eFUSE blowing for platform security and production configuration Calibration & Testing: RF Calibration – LTE/4G/5G, GNSS (GPS/GLONASS), Bluetooth, Wi-Fi QCN/XQCN Handling – Backup, edit, restore NV configurations EFS Management – File system access for provisioning and NV injection RF Tuning & Optimization – Gain table tuning, PA bias, switch path config Production Calibration Flow – Factory-line calibration using automation scripts Carrier Certification Support – TRP/TIS/SAR data generation, PTCRB, GCF Modem & Protocol Stack Knowledge: LTE Bands, Band combinations, Carrier Aggregation Diag protocol & diagnostic message decoding Call flow understanding: Attach, RRC, PDP contexts NV item structure and interdependencies Behavioural Skills: Strong communication and teamwork skills. Ability to adapt to a fast-paced and dynamic business environment. Detail-oriented with a focus on quality and accuracy. Proactive and self-motivated with a results-oriented mindset.

"We are hiring for manufacturing plant." Position: Equipment Engineer - Lab Support Engineer Qualification: Minimum qualification should be Diploma in (Electronics & Communication, Electrical Engineering, Computer Science) with 4-5 years of experience or BE/B. Tech (Electronics & Communication, Electrical Engineering, Computer Science) with 5-6 years of experience in a relevant field Experience: 4-8 Years Location: Sanand, Ahmedabad Job Summary: Oversees the installation, modification, upgrade and maintenance of manufacturing equipment. Maintains current records on equipment manufacturers. technical notices, upgrades and safety issues. Studies equipment performance and reliability. Establishes programs and solutions for increasing up-time and for equipment problems that affect the manufacturing process. Provides technical support to the manufacturing equipment repair and process engineering organizations. SOW:- Lab Support Engineer Job Description & Key Responsibilities: Must have experience in lab. Set up test configurations in the lab as advised by the Engineering team. Deliver within the defined SLA. Coordinate with cross-functional teams if necessary to complete the assigned tasks. Manage miscellaneous tasks inside the lab. Prepare and maintain work reports and service reports. Track the equipment maintenance and calibration schedules. Coordinate with vendors to establish new setups in the lab. Basic knowledge of the LAB area complies with ESD & EHS standards. Prepare monthly reports. Collaborate effectively with the team and be willing to learn new technologies and equipment operations. Proficiency in hardware and software installation. Experience in the installation and maintenance of memory testers such as Advantest, Flex Star, Teradyne. Diagnostic and calibration experience with memory testers and chambers. Familiarity with desktop support, AD maintenance, Win Server. Experience in a Linux environment CentOS & Ubuntu. Good understanding of IT infrastructure hierarchy, Proficient with MS Office. Experience with any ticketing system is mandatory, Python knowledge. Vendor coordination for warranty claims, repairs, and services. Jira ticketing experience (not mandatory) & Quality tools or certification with 5S,6S, AI awareness. Work with technicians to fix issues in limited time frame. Ensure the LAB area complies with ESD & EHS standards. Collaborate with different teams, Coordinate within the team to resolve any challenges. Be a team player, adapting and learning new technologies and equipment operations. Effective communication skills, both written and spoken. Strong analytical skills for technical issue resolution. Benefit: Transportation and canteen facility is available

About the job At IF MedTech, we are dedicated to revolutionizing healthcare through cutting-edge medical device design, development, and pilot manufacturing. Our global team collaborates with experts across medical, engineering, business, and research domains to bring innovative solutions that enhance healthcare and improve lives. Join us in our mission to drive innovation and make a global impact in the medical technology sector. Responsibilities ● Develop and execute verification and validation protocols for medical device hardware and associated mobile and web applications. ● Design and set up testing environments for hardware and software components of medical devices. ● Perform functional, performance, and usability testing for software and hardware components. ● Identify and document defects and inconsistencies, collaborating with development teams for resolution. ● Design, implement, and execute automated test scripts for software applications where applicable. ● Assist in defining test strategies, test plans, and acceptance criteria for hardware and software systems. ● Ensure compliance with industry regulations such as ISO 13485, IEC 62304, and FDA guidelines. ● Contribute to the preparation of detailed test reports and validation documentation. ● Maintain testing tools and environments, ensuring readiness and calibration. ● Provide inputs for risk assessment and design reviews during product development. ● Maintain testing tools and equipment, ensuring calibration and readiness for testing. ● Stay updated with advancements in testing tools, automation frameworks, and industry best practices. Qualifications ● Bachelor's degree in Biomedical Engineering, Computer Science, Electronics, or a related field. ● Preferably 0 to 2 years of experience in verification, validation, or quality testing, preferably in the medical device or software development domain. ● Ability to design and implement testing setups for hardware and software. ● Knowledge of industry standards such as ISO 13485, IEC 60601, IEC 62304, and FDA guidelines. ● Experience with documentation for regulatory submissions is advantageous. ● Familiarity with automated testing tools like Selenium, Appium, or similar frameworks is preferred. ● Proficiency in defect tracking tools (e.g., JIRA) and version control systems (e.g., Git). ● Strong analytical, problem-solving, and attention-to-detail skills. ● Excellent documentation and communication skills. ● A collaborative mindset with a proactive approach to problem-solving. Join IF MedTech to drive innovation in healthcare technology and develop software solutions that transform lives worldwide!

Company Description At TAPI, we’re not just a company—we’re a community committed to advancing health from the core. As the world’s leading supplier of active pharmaceutical ingredients (APIs), we partner with 80% of the top 50 global pharmaceutical companies. With a legacy spanning over 80 years and a portfolio of more than 350 products, as well as custom CDMO services, we’re shaping the future of health worldwide. Our strength lies in our people—a team of over 4,200 professionals across 13 state-of-the-art facilities in Italy, Hungary, the Czech Republic, Croatia, Israel, Mexico, and India. Together, we innovate, solve problems, and deliver excellence. Join us and be part of a mission that transforms lives. Job Description We are seeking a skilled and detail-oriented Analytical R&D Analyst with a strong foundation in organic chemistry and spectroscopy. The ideal candidate will bring hands-on experience in analytical method development and validation, along with expertise in operating a wide range of analytical instruments. This role supports API development and impurity profiling, while ensuring compliance with global regulatory standards. Key Responsibilities Analytical Method Development & Validation Develop and validate HPLC/GC test methods for diverse regulatory markets Perform troubleshooting and support OOS investigations during validations Conduct trace analysis, related substances testing, and carryover evaluations Prepare protocols and reports in line with data integrity and GMP guidelines Instrument Operation & Maintenance Handle routine operation and calibration of HPLC, IR, UV, Karl Fischer Titrator, Halogen Moisture Analyzer, Polarimeter, and wet lab techniques Operate advanced detection systems such as UV-PDA, ELSD, CAD, IR, and Mass detectors Manage routine troubleshooting and preventive maintenance of analytical instruments Spectroscopic Characterization & Data Interpretation Perform structure elucidation and characterization of APIs and impurities using spectroscopy Interpret analytical data using NMR, MS, DSC, TGA, and FTIR techniques Support identification of known/unknown impurities and intermediates Documentation & Compliance Maintain lab notebooks, calibration records, and validation documents Ensure compliance with GLP, GMP, and safety protocols during lab operations Work collaboratively with cross-functional teams including QA, QC, RA, and manufacturing Qualifications The ideal candidate will have: M.Sc. in Organic / Analytical Chemistry. 4 to 7 years of experience in a relevant field Additional Information Make Your Mark with TAPI Your journey with TAPI is more than a job—it’s an opportunity to make a lasting impact on global health. If you’re ready to lead, innovate, and inspire, we’re excited to welcome you to our team. Together, let’s shape the future of pharmaceuticals. Apply on top of this page and our talent acquisition team will be in touch soon!

Sun Pharmaceutical Industries Ltd. Position: Senior Officer Production Grade: G12B Location: API – Dahej Location Taking charge from previous shift by checking BMR and status of plant/ batches for operation in shift. To ensure that status of other activity is as per log report while taking charge from Outgoing officer. During shift to ensure that GMP norms are strictly followed and to report superior in Case of any deviation understood. During shift ensure that follows process parameter as per BMR, if any deviation observed, than immediately corrective action 10 be taken and such deviation to be Documented and informed to reporting authority. Co-ordinate with service dept. like Eng. QC, store, etc. to ensure uninterrupted Services activate. Calibration and verification of weighing balance. Raw materials receipt from store by checking MRO and verifying with all containers of raw material dispensed to the batch numbers. Solid and process waste transfer to respective area and record maintaining. Other activities entrusted from time to time Differential pressure monitoring, Temperature or humidity, equipment occupancy Record. Housekeeping maintaining/ get cleaned by respective person.

About Native: Urban Company stands as a trailblazer in the realm of home solutions, crafting innovative products to enrich the lives of our customers. From our position as the foremost provider of professional home services in India and Asia, we have ventured into the realm of smart home products under the ' NATIVE by UC ' brand. In 2023, we launched our own RO Water Purifier . With our 8+ years of experience in servicing water purifiers, we brought great innovations and delightful features to guarantee 2 years of unconditional warranty! Committed to excellence, we strive to deliver unmatched customer experiences, echoing the standards set by industry giants like Apple. Join our dynamic team and be a part of reshaping the future of home living with our innovative products. Currently, our product portfolio includes residential smart water purifiers and smart door locks . Amazon link for our current range of smart water purifiers. Role Summary : As an R&D Engineer, you will support the development and testing of water purifiers and filtration systems. You will design testing protocol s, run experiment s, and develop high-impact solution s. This is a hands-on, execution-heavy rol e with high ownershi p, giving you the opportunity to define and shape the R&D functio n within our organization. This role involves managing day-to-day lab operations, conducting tests, setting up and maintaining test rigs, and providing insights for product performance improvement. You will be actively involved in lab testing, benchmarking, and supporting compliance with BIS/NSF standards, working closely with cross-functional teams to contribute to the product development process . Key Responsibilities: Oversee and manage daily laboratory operations, including setup, calibration, and maintenance of testing equipment. Conduct water quality, performance, and durability tests for water purifiers, filters, and components. Design and assemble test setups for various R&D experiments and validation activities. Analyze test results and provide technical insights for product improvement as part of the R&D team. Support benchmarking of competitor products to derive insights for innovation and enhancement. Assist in modifying components for improved performance, cost optimization, or localization. Work with electrical and electronic components such as solenoids, pumps, sensors, and control units. Support development and validation of new test methods, SOPs, and documentation as per BIS/NSF standards (e.g., IS 16240, IS 10500). Maintain accurate records of tests, observations, and analysis for reporting and compliance. Coordinate with external labs for specialized testing and validations. Ensure adherence to lab safety protocols and maintain a well-organized lab environment. Visit field sites for R&D activities if required. Required Skills & Experience: B.E./B.Tech in Mechanical/Electrical/Electronics/Chemical Engineering OR B.Sc./M.Sc. in Chemistry, Environmental Science, or related fields. 2–5 years of relevant experience in lab testing for water purifiers or similar appliances. Good understanding of water purification technologies (RO, UV, UF, Carbon filters). Hands-on experience with electrical/electronic components (solenoids, pumps, sensors). Familiarity with BIS/NSF standards for water quality and purifier testing. Ability to design and execute test setups for R&D evaluation. Strong analytical, troubleshooting, and problem-solving skills. Proficiency in documentation and record-keeping. Collaborative mindset for working with cross-functional teams. Why Join Native? Be part of an innovation-driven organiza tion shaping the future of water purification. Work w ith cutting-edge technolo gies and contribute to impactful R&D projects. Collaborative, growth-oriented work culture w ith opportunities for skill development. Work-life bal ance with a dynamic and supportive team.

Role: As a test engineer, he will strengthen our group of development engineers in the development and performance verification of climate chambers, safety cabinets, incubators and laboratory ovens. In cooperation with R&D, he should coordinate suitable verification tests and their scope, carry them out, create test reports and interpret the test results. Total Experience: 4+Years Location: Hyderabad Job Mode: Work From Office(6 Days/Week) Notice Period: Immediate to 30 Days Tasks: Execution of standardized tests to qualify mechanical or electrical device components as well as performance and reliability tests on complete prototype devices Functional testing includes all activities addressing sample preparation, calibration of instruments, ensuring standard testing till report out of the test trials conducted. Ensures the lab is functioning appropriately (e.g. maintain proper inventory levels of lab supplies, proper maintenance, and calibration of equipment, AMCs of equipment etc.) Asset tracking and maintenance of the records as per the Quality and Regulatory requirements of the Organization Contribute to Development, Updating, and/or review of Test Procedures, SOPs, and Protocols as assigned. Perform troubleshooting and investigations Comply with all regulatory/in-house requirements (may include but not limited to safety, housekeeping, laboratory chemical waste, QMS, documentation) when performing the assigned activity. Qualifications: Graduate or Diploma in Mechanical or Electrical & Electronics Engineering 5+ years of experience in working in Testing labs especially in Mechanical/Electrical Labs Knowledge and use of Good Documentation practices is required Good knowledge of spoken and written English Flexible to work in weekends, multiple shifts & across lab locations Experience of Thermocouple fixing and data logging on Thermal testing is highly preferable

Job Title: ​Calibration Engineer- Inhouse(Female) Key Role and Responsibilities: ∙Perform lab calibration and adjustment of instruments and equipment as per defined procedures. ∙Maintain detailed records of calibration activities including dates, results, and equipment condition. ∙Assist customers with technical support related to calibration and equipment usage. ∙Ensure compliance with relevant industry standards and regulatory requirements. ∙Stay updated on advancements in calibration techniques and tools. Skills: ∙Technical knowledge in electronics, instrumentation, mechanical, or electrical systems. ∙Analytical thinking and keen attention to detail. ∙Ability to follow procedures and maintain documentation. ∙Good communication and customer interaction skills. ∙Ability to work independently and manage time effectively. Required Skills: ∙Basic knowledge of electronic, mechanical, thermal, or optical systems. ∙Ability to manage multiple tasks in a fast-paced environment. ∙Clear verbal and written communication skills. ∙Willingness to learn and grow in a technical field. Desired Skills: ∙Familiarity with ISO 17025 calibration standards. ∙Prior lab or workshop exposure through projects or internships (preferred, not mandatory). Qualification: ​Diploma, ITI, B.E. in Electronics & Communication, Instrumentation, Mechanical, Electrical, or B.Sc. in Physics. Job Types: Full-time, Fresher Pay: ₹15,000.00 - ₹18,000.00 per month Benefits: Provident Fund Location: Maduravoyal, Chennai, Tamil Nadu (Required) Work Location: In person