66 2D Drawings Jobs - Page 3

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review xand documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Accountability Technical Knowledge

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Teamwork Communication Technical Knowledge Accountability

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Instills Trust Persuades Resourcefulness Decision Quality Situational Adaptability Manages Complexity Being Resilient

Purpose & Scope of Position Working Engineer (WE) will be part of an engineering team providing engineering services to large and small projects. WE is responsible for engineering in a 3D environment and production of 3D models and 2D drawings in accordance with project requirements under the supervision of the Project Engineer (PE). WE is required to apply specialized and/or advanced engineering principles at conceptual and detailed level. The WE participates in a wide range of projects and the activities include modeling and drafting for detailed engineering phase for multi-disciplinary projects. Experience 1-4 years of experience in relevant design discipline Experience in engineering packages Qualification Postgraduate or graduate in an engineering discipline Key Responsibilities 1. Assist the PE with the delivery of project requirements as they relate to scope, quantities, quality, cost and schedule 2. Responsible to work in an integrated 3D environment and produce design calculations, reports, specifications, evaluation reports, technical recommendations and, 3D models and 2D drawings as per project requirements 3. Produce and maintain technical and engineering deliverables using 2D and 3D engineering software as required 4. Facilitate the sharing of technical expertise across projects including archival of project documents. 5. Provide and/or participate in training for resources assigned to the project 6. Perform conceptual layout work 7. Develop design details, prepare / extract drawings and check the deliverables prior to release 8. Ensure coordination with engineers within the discipline and with other disciplines 9. Co-ordinate and review clash detection in an integrated model with other discipline engineers and resolve issues if any 10. Participate in formal engineering review processes 11. Review vendor drawings and documents including archival and inputs to other disciplines 12. Represents the discipline during site visit / client meetings as felt necessary by PE/PM. 13. Support technology team/ Project team for development and automation works as required. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Resourcefulness Ability to Learn Action Oriented Communicates Effectively Job Knowledge Timeliness

To support the development of its Hydrogen Business Line, John Cockerill Hydrogen (JC H2) is looking for a Static Equipment and Skid Design Engineer Key Responsibilities To participate to engineering of the main mechanical equipment of the electrolyser separation system (like pressure vessels and pumps) for project execution. This includes: To analyze client specifications. To prepare technical documents for RFQ based on John Cockerill requirements, applicable norms/rules at project location, and client specifications. To analyze technical offers from bidders and to align them with clarification sheets. Then to issue technical bid evaluation. Follow-up of detailed engineering by subcontractors after purchase order of equipment: Review of manufacturers documentation, such as fabrication drawings, calculation notes and procedures. To provide support to other disciplines, including support to project manager for clarifications with client. To participate to integration of the main mechanical equipment into the electrolyser separation system. This includes: To collaborate with other disciplines (Process, Instrumentation, Structure, CAD, HSE) for suitable integration of the system in skid mounted preassemblies. To provide guidelines and instructions to the drafting team for 3D model and 2D drawings. To verify coherence between P&ID, the system 3D model and the equipment design. To consider various project specific constraints (layout, accessibility, logistic, process) to adapt the separation standard system design where needed. Education and Experience Mechanical engineer. At least 8 years of experience in chemical, oil & gas, power, or heavy industry sectors. Interest in equipment design in a technically challenging process. Knowledge of international codes and standards, mainly ASME VIII div. 1, API and TEMA. Software knowledge: PV Elite, Compress or AutoPipe Vessel Experience in cladded vessels is an asset. Experience in material selection, corrosion resistance and welding is an asset. Good critical appraisal Autonomous Team player Structured, rigorous, organized. Languages: English - Professional working proficiency.

Job Title: Die Maker Location:Udhyog Vihar Experience Required: 10-15yrs Job Overview: We are seeking a skilled and experienced Die Maker to join our team. The ideal candidate will be responsible for assembling, maintaining, and troubleshooting high-speed progressive stamping tools while ensuring adherence to quality standards. Key Responsibilities: Assemble high-speed progressive stamping tools. Work with ferrous and non-ferrous materials such as GI, Copper, Brass, Phosphorous Bronze, Spring Steel, and CRCA. Handle conventional machines like milling, lathe, and grinding. Perform die tweaking and on-machine die maintenance. Conduct bench maintenance of progressive dies. Utilize measuring instruments such as vernier calipers, micrometers, and height gauges. Apply knowledge of die steels and heat treatment. Read and interpret 2D and 3D drawings. Identify faults, breakdowns, and problem areas in press operations, ensuring minimal downtime. Evaluate die conditions and determine whether repairs can be done in-press or need removal for maintenance. Escalate activities that may cause harm or damage to tools. Report breakdown root causes, equipment faults, and concerns to management. Maintain high-quality standards and adhere to quality regulations. Identify spare requirements and maintain a log of tool usage. Develop and maintain performance of complex-specific tool suites. Support new project tooling from commissioning to production. Assist in tooling buyoffs and trials. Manufacture new tooling and spare parts to meet production deadlines. Document die history and work records. Perform planned preventative maintenance. Execute engineering-level changes to tools and modifications. Record all tooling data and update the Tool Room database. Participate in improvement activities to support departmental and company objectives. Manage cost and budget considerations for tooling. Follow 5S methodology to maintain a high-standard workplace. Ensure proper identification and use of personal protective equipment (PPE). Report lost time, minor, and trivial accidents. Stay updated with tooling and engineering trends. Participate in continuous training and development. Conduct root cause analysis and resolve issues efficiently. Skills & Competencies: Strong knowledge of die-making and tool maintenance. Hands-on experience with machining processes. Ability to read and interpret engineering drawings. Problem-solving and analytical skills. Knowledge of quality standards and safety regulations. Familiarity with 5S and lean manufacturing principles. Good communication and documentation skills.

Drafting 2 D drawings Develop 2D drawings starting from a 3D drafting. Make customer drawings & make the bill of materials Contribute to mechanical design and associated program deliverables using softwares such as AutoCAD, Solid Works & Ansys. Prepare technical reports, design specifications documents and operational manuals. Perform finite element analysis and calculacin.Experience in designing for heavy machines 4 6 years of experience in designing Experience in Ansys software

Product Development.Responsibilities: Product Design and Development: Develop and design new products or improve existing products based on project requirements and specifications. Create detailed 3D models, 2D drawings, and technical specifications using CAD software. Conduct feasibility studies and design reviews to ensure product manufacturability and performance. Design and perform tests on prototypes. Conceptualization and Innovation: Generate innovative design concepts and solutions to meet project objectives. Research and evaluate new materials, technologies, and manufacturing processes. Stay updated on industry trends and advancements in design and engineering. Technical Documentation: Create and maintain accurate technical documentation, including design specifications, drawings, and reports. Prepare bills of materials (BOMs) and ensure accuracy of design documentation. Document design changes and revisions. Collaboration and Communication: Collaborate with cross-functional teams, including product management, manufacturing, and quality assurance. Communicate design concepts and technical information effectively to stakeholders. Provide technical support and guidance to manufacturing and production teams. Design Analysis and Optimization: Conduct design analysis, including stress analysis, thermal analysis, and fluid dynamics analysis, to ensure product performance and reliability. Optimize designs for cost, manufacturability, and performance. Perform tolerance analysis and ensure design accuracy. Prototyping and Testing: Develop and build prototypes for design validation and testing. Conduct functional testing and performance evaluations of prototypes. Analyze test results and implement design modifications as needed. Manufacturing Support: Provide technical support during the manufacturing process to ensure design integrity. Assist in the development of manufacturing processes and tooling. Address design-related issues and provide solutions to manufacturing challenges.

1. Good experience in Product inspection (Visual & Dimensional) of Aluminium casting parts. 2. Knowing all possible visual & Dimensional defect and able to explain. 3. Depth understanding of Quality standards/ Quality Plan/2D Drawings 4. Good written & verbal communication skills 5.Knowledege in handling measuring instruments like Vernier, Micrometer, Height Gauge & Attribute Gauges.

Major responsibilities: 3D Modelling in Siemens NX. Generation of 2D drawings in Siemens NX. Ensuring completeness and correctness of drawings. Following Quality and Schedule /Budget guidelines as given by superior. Working in SAP / Engineering Control Center Defined competencies: Knowledge of Modelling, Surfacing, Drafting and Assemblies using Siemens NX. Familiar with MS office. Good Communication skills, Conscientious and reliable functioning.

Major responsibilities: 3D Modelling in Siemens NX. Generation of 2D drawings in Siemens NX. Ensuring completeness and correctness of drawings. Following Quality and Schedule /Budget guidelines as given by superior. Working in SAP / Engineering Control Center. Defined competencies: Knowledge of Modelling, Surfacing, Drafting and Assemblies using Siemens NX. Familiar with MS office. Good Communication skills, Conscientious and reliable functioning.

Post Mech Bim engineer / modeller Skills . Industrial equipments GA Model in 3 D, piping , ducting etc Software . Inventor / navisworks / Revit Mech Qualification : - Diploma in Mech enginering Responsibility :- Developing 3 D image of mech equipment from 2 D drawings , 3 D layout , Piping , Ducting and preparation of fabrication drawing for ducting etc

Create 3D models and 2D drawings of plastic injection moulds using Unigraphics (UG NX). Develop mould designs for automotive components considering material properties, part geometry, and manufacturing feasibility. Technical Expertise: Perform mould flow analysis and incorporate necessary design modifications. Optimize designs for manufacturability and cost-effectiveness. Develop core and cavity splits, slides, lifters, and other critical mould elements. Work closely with product design, production, and tooling teams to ensure design accuracy and alignment with production requirements. Coordinate with clients for design approval and resolve technical challenges.

Proficient in AutoCAD, able to work on Piping GA, Skid frames, Isometrics and pipe support drawings. Experience of working on 3D will be added advantage.2D & 3D Drafting Create detailed 2D and 3D drawings of piping systems using software like AutoCAD, PDMS, or SmartPlant based on engineering designs and specifications. Isometric & Piping Layouts: Develop piping isometric drawings, general arrangement (GA) layouts, and detailed pipe support drawings for construction and installation. Collaboration: Work closely with engineers to translate design requirements into precise technical drawings, ensuring alignment with project specifications. Documentation: Prepare and manage technical documents, including bills of materials (BOMs) and piping diagrams, ensuring proper documentation for projects. Compliance: Ensure all drawings comply with industry standards (e.g., ASME, ANSI) and project-specific requirements, with a focus on accuracy and clarity.