335 Nfpa Jobs - Page 12

Job Description Job Overview: The Senior Electrical Engineer uses best practices and knowledge of internal or external issues to improve the electrical discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the electrical discipline. The Senior Electrical Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. The Senior Electrical Engineer impacts a range of customers, operational, project, or service activities with the electrical team and other related teams and ensures that they are working within the appropriate guidelines and policies. Responsibilities Key Tasks and Responsibilities: Apply thorough working knowledge to prepare and oversee the development of key project deliverables, including (but not limited to) the following: Specifications and Datasheets Electrical Load List One-line diagrams Motor control schematics Electrical building and equipment layouts Bills of Material Cable sizing calculations Conceptual studies and calculations Relay Coordination Cost and planning studies Prepare material requisitions, perform offer evaluation and prepare Technical Bid Evaluation Lead Project Development and Coordination, including (but not limited to) the following: Maintain and promote a focus on McDermott’s end-product throughout engineering, fabrication, or construction Function as electrical engineering project lead or electrical task lead Become familiar with the project scope of work, basis of design, specifications, and schedule Report to and coordinate with the electrical engineering lead, project engineering manager, and electrical department manager Supervise and coordinate with electrical engineers and designers Maintain close coordination with other discipline engineers and with the Client’s engineer Carefully evaluate, communicate, and manage change with full awareness of project impact Assume responsibility for cost, schedule, and quantity and budget control Lead the development and support of vendor packages, including (but not limited to) the following: Create, issue, and manage requisition packages for Substations, Transformers, and Electrical materials Create, issue, and manage subcontract packages for Heat Tracing, Cathodic Protection, and Electrical Installation Perform and coordinate the review of supplier documents for electrical and non-electrical packages Coordinate and supervise the Inspection and Factory Acceptance Testing (FAT) of electrical equipment, motors, and associated skids Lead Site Support, including (but not limited to) the following: Lead off-site and/or on-site technical support to Construction personnel Manage all site issues and coordinate with office personnel to resolve issues as needed Provide detailed technical support and supervision for Site Acceptance Testing (SAT) of electrical equipment Provide detailed technical assistance for pre-commissioning, energization, commissioning, and start-up, as required by the project Qualifications Essential Qualifications and Education: Must hold Bachelor’s or Master’s Degree in Electrical Engineering Not less than 12 years of detailed electrical engineering experience Strong working knowledge of many design techniques, analysis methods, and detailed knowledge of the content and application of standards, codes, and guidelines, including IEC, NEC, NFPA, IEEE, and ANSI and the latest scientific and engineering methods Technical knowledge of the detailed design engineering process in Oil & gas, EPC Projects Project coordination and execution skills Intermediate experience with Smart Plant Electrical (SPEL), AVEVA Electrical, Dialux/Chalmlite/Agi32, ETAP, and MS Office Suite including Excel and Word About Us Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably. For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries. Show more Show less

Overview We are seeking a skilled Instrumentation and Controls Engineer to join our dynamic team. In this role, as part of our Team, you will engage in the design, development, and the implementation of cutting-edge Electrical, Instrumentation and Control (E, I&C) Systems for state-of-the-art chemical, industrial and high-tech manufacturing facilities serving global leaders in various markets. As an Instrumentations & Controls Engineer, you will be responsible for working within our design team to create and problem-solve exciting and complex designs that incorporate some of the latest design techniques and modeling software, while ensuring that all design requirements are met within approved budgets and schedules. You don't have to be an employee long before you understand the SSOE difference. It goes back to our history of reinventing ourselves for new markets, serious rates of growth year after year, and being ahead of the curve in technology. Those are the achievements of a company that rewards talent and effort in ways that mean the most to the individual. Responsibilities The following duties are typical of the position but are not all encompassing. Responsibilities include those required to deliver quality service on schedule and within budget in a team environment. Design Projects, Tasks And Responsibilities May Include Work as a Project Team Member to support the development of Electrical, Instrumentation and Controls (E, I&C) design deliverables that meet the requirements of a project’s scope, customer’s requirements, and adheres to applicable codes and company standards. Work from field notes, sketches, and other input materials to determine and plan the best approach to prepare drawings and other project deliverables. Perform routine design calculations for the review by the Discipline Lead / Project Engineer. Design projects and tasks may include: Supporting the development of P&IDs including Process Instrumentation and Interlocks. Developing Instrument Indexes. Developing Instrument data sheets and other specifications. Developing instrumentation locations, plan drawings and instrumentation loop diagrams. Cable sizing for instrumentation and low voltage wiring. Cable tray layout and sizing for instrumentation and low voltage wiring. Schematics for power, control, instrumentation and shutdown circuits. o Design DCS / PLC Control Panels, Field Junction Boxes, Local Control Panels including layout, bills of material, power schematics, control schematics and terminations. Design of communication systems using fiber optic cables, profibus and/or Ethernet. AC and DC interconnects as well as conduit and cable schedules. Depending on Project Assignments, Limited Travel may be required to Perform field inspections and provide technical services for activities related to construction, equipment installation or modifications. Qualifications What You Will Bring: Bachelor’s degree in Electrical Engineering or Process Instrumentation and Control Engineering from an accredited University. Should have fluency in communication (English). Chemical Process and / Refinery Design / Oil & Gas Experience Required. Minimum 7 years of experience. (preferably 3 plus years- USA projects). Process Instrumentation Selection / Specification Experience Required. Experience with P&IDs, Instrument Indexes, Instrumentation Location Plans, and Instrumentation Wiring Required. NFPA 70 Required, specifically for the design of areas classified as electrically hazardous. Experience with MS Office Software Suite Required. Experience with CAD Software, AutoCad 2D and / or MicroStation (2D & 3D versions). Experience in the use of Smart Plant Instrumentation (SPI) Software is a must. Experience in the design of DCS Based and / or PLC Based Systems a plus. Should be ready to work in the India evening time for a couple of hours to overlap with USA offices. Additional Perks Offered A collaborative and supportive culture where you’re not just a number—you’re a critical and highly valued member of our team! As part of a multidisciplinary team, you will experience exciting projects from start to finish and interface directly with some of the most forward-thinking clients in the world. A mindset of continuous learning where you are encouraged to ask questions, bring fresh ideas to the table, and pursue your professional development goals. A diversity of market sectors, project types, and geographic locations that help insulate your career from economic ups and downs. A formal career path and real opportunities for advancement. A holistic approach to compensation and benefits that supports your physical and mental health, encourages work-life balance, and empowers your career advancement and financial success. SSOE – The Best of Both Worlds At SSOE, Our Growth Trajectory Allows Us To Offer The Opportunities Normally Associated With a Large Firm While Embracing The Collaborative And Supportive Culture Often Found In Smaller Firms. As a Member Of The SSOE Team, You Will Work On Exciting And Diverse Projects For Fortune 100 Clients Around The Globe, Supported By The Best Technology For The Task At Hand. You Will Experience Our Employee-centric Culture That Strives To Offer a Healthy Balance, Flexible Working Arrangements, Direct Access To Leadership At All Levels, And a Mindset Of Continuous Learning. Once You Experience The SSOE Difference, You’ll Understand The Why Behind Our Metrics 28% - of our employees have been with SSOE for 10 years or more. 15% - percentage of employees with tenure exceeding 15 years. 99% - our CEO’s approval rating on Glassdoor. 98% - portion of our clients who say they would recommend us to a colleague Show more Show less

Company Overview Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, turboexpanders, services, and solutions for the liquefied natural gas (LNG), liquefied hydrogen (LH2), and industrial gases industries. Applications include fueling stations, marine engines, peak shaving, power generation, virtual pipelines, carbon capture, geothermal power and well stimulation. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with $1.5 B USD in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange. Job Overview The Technical Liaison / Champion will act as a bridge between the NESP function unit (FU) and the local engineering entity, ensuring alignment in engineering execution, technical standardization, and best practices. The role focuses on strategic projects, including CO₂ recovery/liquefaction, Amine Wash, small-scale LNG, and energy recovery solutions. This individual will lead technical coordination efforts to establish an Engineering Excellence Center, enhancing engineering capabilities within the local entity Responsibilities Essential Functions/Responsibilities Technical Coordination & Engineering Excellence Act as the primary technical interface between the NESP function unit and the local engineering team. Ensure seamless integration of FU engineering requirements into local entity workflows. Drive engineering best practices and standardization across CO₂ recovery, Amine Wash, small-scale LNG, and energy recovery solutions. Ensure compliance with industry standards (ASME, API, ISO, NFPA, etc.). Project Execution & Quality Assurance Guide the local engineering team to deliver error-free designs and calculations. Establish process workflows to improve engineering efficiency and reduce rework. Review and validate engineering deliverables to meet function unit expectations. Support feasibility studies, conceptual designs, and detailed engineering for strategic projects. Knowledge Transfer & Capability Development Facilitate training programs to enhance technical competencies in CO₂ recovery, Amine Wash, LNG, and energy recovery. Act as a mentor to local engineers, transferring knowledge from the function unit. Lead workshops and discussions on emerging technologies and innovative solutions. Stakeholder Engagement & Communication Collaborate with NESP function unit leaders to align engineering priorities. Provide regular updates on project progress, challenges, and solutions.Act as a liaison for suppliers and third-party vendors to ensure smooth project execution. Standardization and Compliance Ensuring technical decisions align with industry standards and company policies. Keeping up with regulatory requirements and certifications. Documentation and Knowledge Sharing Maintaining up-to-date records of technical discussions, decisions, and changes. Ensuring knowledge transfer across teams to build technical competency. Risk Management Identifying potential technical risks early in the project. Developing mitigation strategies to prevent delays and cost overruns. Authorities Approve technical solutions and design standardizations for strategic projects. Recommend process improvements to optimize engineering efficiency. Represent the local engineering entity in technical discussions with the function unit. Supervisory Responsibility This position has direct supervisory responsibilities and does serve as a coach and mentor for other positions in the department/organization. Provide technical guidance and mentorship to the local engineering team. Support talent development initiatives to build subject matter expertise in strategic projects. Coordinate workload distribution and ensure efficient resource utilization. Work Environment This job operates in a professional office environment. This role routinely uses standard office equipment such as laptop computers, photocopiers, and smartphones. Physical Demands While performing the duties of this job, the employee is regularly required to talk or hear. Specific vision abilities required by this job include close vision and ability to adjust focus. This would require the ability to lift files, open filing cabinets and bend or stand on a stool as necessary. Qualifications Required Skills and Competencies Technical Expertise: Strong understanding of CO₂ recovery, liquefaction, Amine Wash processes, energy recovery, and small-scale LNG. Experience in designing and optimizing process systems for strategic energy projects. Knowledge of industry codes and standards (ASME, API, NFPA, ISO, IEC, etc.). Project & Process Management: Ability to manage complex engineering projects while ensuring quality and efficiency. Experience in process optimization, standardization, and cost reduction initiatives. Collaboration & Communication: Strong interpersonal skills to coordinate between function unit and local entity. Ability to translate complex engineering requirements into clear, actionable deliverables. Problem-Solving & Decision-Making: Analytical mindset to identify and resolve technical challenges effectively. Ability to make informed decisions based on engineering data and project needs. Qualifications Education: Bachelor’s or Master’s degree in Mechanical or Process (or related field). Experience: 10+ years of experience in engineering, with a focus on strategic energy projects. Prior experience in a liaison or coordination role between global and local engineering teams is preferred. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice Show more Show less

Description Working knowledge in using Electrical codes and standards (i.e.NEC, IEEE, IEC, NFPA,etc.) Working knowledge of SKM Systems Analysis or Electrical Power Systems Analysis (ETAP) system modelling software. Perform load flow, short circuit studies, and arc flash studies Perform coordination studies of protective devices and recommend protective device settings for coordination. Develop native relay setting files using device (vendor) software is preferred. Recommend new protection settings for MV and LV equipment such as relays, breakers, and fuses. Understanding of major equipment damage curves and protective device curves on Time-Current Curve (TCC) graphs to ensure proper protection Perform steady-state and transient motor starting studies is preferred. Perform engineering calculations such as voltage drop, CT saturation, cable sizing, battery, and battery charger sizing. Ability to understand electrical drawings (i.e., one line diagrams, three line diagrams and schematics) and protection schemes within industrial facilities Experience with US projects is preferable. Responsible for quality of electrical documentation associated with the project. Technical ability in engineering design is strongly preferred. Coordinating with team members and monitoring project schedules, submitting with quality. Qualifications Requires a bachelor’s degree in electrical engineering & a minimum of 4 years of experience in electrical systems studies in the electric utility or industrial facilities. A master of science degree in electrical engineering may be substituted for 1 year of experience. Strong knowledge and proficiency in standard engineering techniques and procedures. Excellent written and verbal communication skills. Ability to work methodically and analytically in a problem-solving environment and demonstrate creative and critical thinking skills. Strong attention to detail, facilitation, collaboration, organization, proactive/self-motivated, and problem-solving skills. Proficient knowledge and experience in Microsoft Office and Bluebeam. Job Engineering Primary Location India-Maharashtra-Mumbai Schedule: Full-time Travel: No Req ID: 241576 Job Hire Type Experienced Not Applicable #BMI N/A Show more Show less

Requisition ID: 279725 Relocation Authorized: National - Family Telework Type: Full-Time Office/Project Work Location: New Delhi Job Summary In this role, you will manage a project’s process safety discipline activities and its assigned process safety personnel to deliver the contractual scope of various process safety deliverables and tasks. Your team will execute the process safety engineering plan to support the FEED/EPC scope including design development, ensuring the monitoring of safety, quality, cost, and performance and that all contractual duties and obligations are met. Major Responsibilities Plans, schedules, conducts, and coordinates process safety work for a global business unit delivering FEED and EPC projects in Energy, Infrastructure, Manufacturing, Metal & Mining Industry. Performs work that involves conventional engineering practice but may include solving complex risk and safety design issues. Ability to support multiple projects as a subject matter expert. Review and provide design recommendations for new projects and proposed facility modifications to ensure conformance with process safety and loss prevention codes, standards and procedures Assists in on-the-job-training of assigned personnel and provides input for their performance evaluations. Prepares or assists in preparation of conceptual studies, designs, reports or proposals. Prepares and/or assists in the preparation of cost estimates, quantity take-offs and staffing requirements for proposals, forecasts and change orders. Reviews and checks work of sub-ordinate engineers. Contributed the creation of a work environment that fosters open-ness, trust, communication, teamwork, empowerment, innovation, and satisfaction. Required Knowledge, Skills, And Abilities Mechanical/Chemical Engineer with 18+ years’ relevant experience in FEED and Detailed Engineering of LNG, Petrochemicals, refinery, buildings, clean rooms, metro, airports, etc. Candidate should have in-depth experience in following process safety activities: Design of fire protection system including fire water demand, P&IDs, layouts, data sheets, etc. Preparation of fireproofing schedule and diagrams. Preparation of fire & gas detection layouts and cause & effect charts Analysis of fire water network in Pipenet Preparation of Hazardous area classification schedule Preparation of Escape route/safety sign layouts Safety studies like HAZID/ENVID, HAZOP, Consequence modeling, fire modeling, CFD analysis, etc. Working knowledge of various International codes and standards including NFPA, IBC, IFC. Supervision of small team of process safety engineers. Education And Experience Requirements Candidate should have written and presented technical papers with a proven track record of having executed process safety work in a leadership role on large projects. Professional membership, being on code committees and having co-authored industry codes and standards will be an added advantage. Working experience of software’s like PHAST, CANARY, PHAPro, ExSILentia, Pipenet, etc. Understanding of engineering planning and control.Required: A university or college course degree from an accredited university in Chemical/Mechanical Engineering 18+ years of relevant industry experience. Excellent technical and managerial skills, with both verbal and written communication skills. Advanced degree (MTech or PhD) in Chemical/Mechanical Engineering. Ambitious, energetic, self-motivated, self-managed, team player, and results-oriented. Strong work ethic and ability to work in a team-oriented environment. Energetic and positive attitude working with multiple clients on a wide variety of projects. Team building, conflict management and resolution, and negotiating skills Total Rewards/Benefits For decades, Bechtel has worked to inspire the next generation of employees and beyond! Because our teams face some of the world's toughest challenges, we offer robust benefits to ensure our people thrive. Whether it is advancing careers, delivering programs to enhance our culture, or providing time to recharge, Bechtel has the benefits to build a legacy of sustainable growth. Learn more at Bechtel Total Rewards Diverse Teams Build The Extraordinary As a global company, Bechtel has long been home to a vibrant multitude of nationalities, cultures, ethnicities, and life experiences. This diversity has made us a more trusted partner, more effective problem solvers and innovators, and a more attractive destination for leading talent. We are committed to being a company where every colleague feels that they belong-where colleagues feel part of "One Team," respected and rewarded for what they bring, supported in pursuing their goals, invested in our values and purpose, and treated equitably. Click here to learn more about the people who power our legacy. Bechtel is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity and expression, age, national origin, disability, citizenship status (except as authorized by law), protected veteran status, genetic information, and any other characteristic protected by federal, state or local law. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to acesstmt@bechtel.com Show more Show less

Responsibilities: Design, implement, maintain and improve electrical systems, equipment selections, specifications and other related processes for commercial, industrial and domestic(multi-family) projects. Prepare detailed technical construction drawings, calculations, specifications for electrical systems to ensure that installation and operations conform to standards, codes and customer requirements using computer-assisted engineering or design software/ tools. (AutoCAD, REVIT, Navisworks, Dialux) Perform detailed calculations and prepare relevant technical specifications, sequence of operations and details for the project as per customer requirements and existing conditions. Knowledge of Codes including but not limited to NYC Building Code, International Codes, Electrical Code, Energy Code, NFPA Standards, ASHRAE Standards, etc. Review design concept, calculations, drawings to the accuracy of design intent, Code Compliance and customer requirements. Review Engineering submittals, shop drawings and various construction administration procedures to provide quick turnaround during project's construction phase. Develop training modules, calculation procedures and other company tool development methods used in Design & Execution. Train young engineers to conform to standards & improve performances. Coordinate with client, project managers and vendors to ensure on time delivery of projects as per schedule and requirements. Develop cost estimation & Bill of materials as per design concept. Should have basic knowledge about other trades in terms of MEP coordination. Requirements: Experience – 4+ Years of experience Strong in Revit and AutoCAD Must have worked with Building Services. Team handling experience Experience with International projects will be preferable Good Communication Skills Location - Pune Show more Show less

Responsibilities: Design, implement, maintain and improve electrical systems, equipment selections, specifications and other related processes for commercial, industrial and domestic(multi-family) projects. Prepare detailed technical construction drawings, calculations, specifications for electrical systems to ensure that installation and operations conform to standards, codes and customer requirements using computer-assisted engineering or design software/ tools. (AutoCAD, REVIT, Navisworks, Dialux) Perform detailed calculations and prepare relevant technical specifications, sequence of operations and details for the project as per customer requirements and existing conditions. Knowledge of Codes including but not limited to NYC Building Code, International Codes, Electrical Code, Energy Code, NFPA Standards, ASHRAE Standards, etc. Review design concept, calculations, drawings to the accuracy of design intent, Code Compliance and customer requirements. Review Engineering submittals, shop drawings and various construction administration procedures to provide quick turnaround during project's construction phase. Develop training modules, calculation procedures and other company tool development methods used in Design & Execution. Train young engineers to conform to standards & improve performances. Coordinate with client, project managers and vendors to ensure on time delivery of projects as per schedule and requirements. Develop cost estimation & Bill of materials as per design concept. Should have basic knowledge about other trades in terms of MEP coordination. Requirements: Experience – 4+ Years of experience Strong in Revit and AutoCAD Must have worked with Building Services. Team handling experience Experience with International projects will be preferable Good Communication Skills Location - Pune Show more Show less

Dear Candidates, Great Opportunity ! Hiring for #Electrical Design Engineer . Industry - Oil & Gas Qualification - B. Tech/B.E. - Electrical Experience - Min 5 years upto 20 years Location - Gurugram Salary - Upto 30 LPA Permanent Role Job Description :- The Electrical Engineer is responsible for performing Electrical System Design, calculations, Power system studies, procurement activities and Engineering documents/drawings for oil and gas projects. This role requires in-depth Technical knowledge and compliance with all applicable standards, procedures, and client requirements. Duties, Responsibilities and Authorities: Key Responsibilities: Perform the activities as assigned by the Lead on a project and execute the work with quality, budget and schedule. Prepare basic design basis/criteria, specifications and Bill of quantities. Perform Power System Studies (using ETAP/SKM etc. software’s) such as Load flow, Short circuit, Motor starting, Harmonics, Transient, Arch Flash studies and relay coordination. Perform Equipment Sizing calculations e.g. Transformer, Switchgear, Emergency Diesel Generator, UPS & Battery Charger etc. Perform Electrical calculations such as voltage drop/cable derating, Earthing & Lightning calculations and Lighting calculations. Prepare Load List, panel schedules and cable schedules. Develop Protection & Metering SLDs for HV/MV/LV systems. Prepare Motor schematics and interconnection diagrams. Develop area classifications based on Hazardous source list and equipment selection. · Prepare of Electrical Equipment Datasheets, Material requisitions, Technical bid evaluations and Purchase requisitions. Review supplier design drawings/documents. Assist and provide guidance to designers to perform drawings and calculation work. Checking of 3D model through 3D Model review software’s. Review of Electrical Design Drawings. Input to MR prepared by other discipline such as Mechanical, Building etc. and review their package drawings. Input to bid package and construction tenders. Qualifications and Experience: Knowledge of Power distribution and protection system and able to develop design philosophies/Design criteria /control /interlock Schemes Experience of preparing technical specifications, datasheets, material requisitions and vendor print reviews for various electrical equipment. Knowledge of preparation of load list, HV/LV Single line diagrams MCC schedule, cable schedule etc. Knowledge of preparation Motor schematics and interconnection diagrams. Experience in various electrical layouts like grounding, raceways and lighting etc. Knowledge of Hazardous Area Classification, Cathodic Protection System, Electric Heat Tracing Design Review of 3D Model using SPR or Navisworks in 30%, 60% and 90% Model. Familiar with National/International Code and standards (IEC, IEEE, NEC, NEMA, NFPA, API, IS etc.) Experience with Smart Plant Electrical (SPEL), ETAP, and SPR/Navisworks, Lighting Design software (Dialux etc.). Collaborate with multidisciplinary teams to ensure integrated design solutions. Demonstrate high level of quality, accountability and responsibility. Interested candidates can share cv to g.jugeesha@rightadvisors.com 9667275685 Show more Show less

About Us KN Construction Consultants LLP (KNCC) is a leading construction consultancy offering cost estimation, project management, accounting, and strategic advisory services to clients across the U.S. market. With a growing team based in India, we are committed to delivering technical excellence and value-added services to support our clients’ project delivery goals. Role Overview We are seeking a skilled Project Architect to join our Hyderabad-based team. The architect will be responsible for preparing detailed architectural drawings, layouts, and conceptual plans for both commercial and residential projects . As this role will support our U.S.-based clients by generating high-quality design documentation, it is important for the candidate to have a thorough knowledge of regulations, U.S. building codes, Construction Documents set, and other relevant guidelines. A proven experience of at least 4 years in preparing such drawings using relevant tools is highly desirable. Key Responsibilities Develop architectural plans, elevations, sections, and construction drawings based on client briefs and design guidelines. Create conceptual designs, space planning, and layout options for commercial (retail, office, mixed-use) and residential projects. Understand zoning, ADA, egress, and U.S. building code principles to ensure compliance-ready plans. Coordinate with in-house cost estimators, project coordinators, structural engineers, MEP Design engineer, and other stakeholders for alignment on scope, intent, and deliverables. Incorporate client feedback and revise plans accordingly in a timely manner. Prepare drawing sets that are suitable for handoff to U.S.-licensed architects for stamping and permitting. Utilize BIM and CAD software for plan creation, rendering, and 3D modeling as required. Maintain high documentation quality, file organization, and version control. Required Qualifications Bachelor’s degree in Architecture (B.Arch) 4+ years of professional experience on US projects , preferably in both residential and commercial sectors. Proficiency in AutoCAD, Revit (BIM), SketchUp , and Adobe Creative Suite. Familiarity with U.S. building codes , design standards, and permitting processes is strongly preferred . Experience in preparing construction document sets (CD sets) for U.S. or international clients. Strong visual presentation and design detailing skills. Excellent communication and coordination abilities for efficient collaboration with clients from various countries. Ability to handle multiple projects simultaneously with minimal supervision. Quick learner. This is the key to success at our organisation as the clients are from different backgrounds and work on a variety of projects. Knowledge on Green Building Principles is very important. Preferred Qualifications Master’s Degree. Prior experience working for U.S.-based architecture or construction firms. Certification related to IBC, NFPA, ADA guidelines , and green building principles (e.g., LEED). Understanding of the U.S. construction documentation workflow, including Design Development (DD), Schematic Design (SD), and Construction Documentation (CD) phases. U.S. NCARB/ARE knowledge is a plus. What we offer A collaborative work environment with international exposure. Opportunity to contribute to U.S.-based projects while growing your global portfolio. Competitive compensation and performance-based growth opportunities. Flexible and empowering work culture within a growing organization. If you’re an architect who thrives in a fast-paced, detail-oriented setting and you’re looking to apply your design expertise on global projects, we’d love to hear from you. Apply now to join a team where your designs make a transcontinental impact. Show more Show less

Job Title: Plumbing Design Engineer Location: Coimbatore, Tamil Nadu / Remote employment available Employment Type: Full Time Experience Level: Entry to Mid Level Industry: MEP / Building Services / Construction Engineering About the Role: We are looking for a skilled and detail-oriented Plumbing Design Engineer to join our growing team. The ideal candidate will have strong technical knowledge in designing plumbing systems for residential, commercial, and/or industrial buildings, ensuring code compliance, sustainability, and efficiency in design. Key Responsibilities: Design and develop plumbing systems including domestic water, sanitary, storm drainage, vent systems, and specialty systems (e.g. medical gas, compressed air). Prepare detailed design drawings, specifications, and equipment schedules using AutoCAD/Revit and other design tools. Coordinate with architects, structural engineers, HVAC, and electrical teams to ensure fully integrated building services. Conduct site visits, surveys, and inspections to validate design and support construction. Ensure compliance with local plumbing codes, standards (UPC/IPC/NFPA), and green building practices. Provide support during bidding, procurement, and construction phases including RFIs, submittal reviews, and change order evaluations. Qualifications: Bachelor’s degree or Diploma in Mechanical Engineering or related field. 1+ years of experience in plumbing design engineering (preferably in building services or MEP consulting). Proficiency in AutoCAD, Revit MEP, and relevant calculation software (e.g., HASS, Pipe Flow Expert). Familiarity with plumbing codes (IPC/UPC/NFPA) and sustainable design standards (LEED/GREEN). Excellent communication and team collaboration skills. PE License / CPD Certification is a plus. Why Join Us? Work on high-impact, diverse projects across sectors. Supportive and collaborative work environment. Opportunities for professional growth and development. Competitive compensation and benefits. Interested? Click Apply Now or send your resume to recruitement@vinayakconcern.com. We’d love to connect and explore how you can contribute to our innovative projects. Job Types: Full-time, Permanent, Fresher Pay: ₹10,000.00 - ₹30,000.00 per month Benefits: Health insurance Life insurance Paid sick time Paid time off Schedule: Day shift Fixed shift Weekend availability Supplemental Pay: Yearly bonus Work Location: In person

Job Description Summary About our business GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification segments and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world’s challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. At GE Vernova, our Hydro Power division stands at the forefront of the hydroelectricity generation industry. We are dedicated to designing, manufacturing, and installing cutting-edge equipment for hydroelectric power plants, as well as servicing and refurbishing existing facilities to ensure optimal performance and longevity. Our turbines and generators account for over 25% of the total installed hydropower capacity worldwide. With a dynamic team of 3,600 professionals spread across more than 30 countries, we have the energy to change the world. Be part of a team that is not only shaping the energy landscape but also contributing to a more sustainable planet. Join us and make a difference with GE Vernova’s Hydro Power business division! Read more on www.gevernova.com About Position The employee will be responsible for the design of hydro power plant electrical systems and BOP equipment for large hydro and refurbishments projects across the world. Responsible for major and complex Refurbishment and Service project execution assignments within defined lead time and budgeted workhours Active participation in basic design and detail design activities. Involvement and support to Hydro product management team for product development Functional reporting to Electrical COE leader Globally EHS: - Implementation EHS policy & procedures of GE for design aspect. Responsible for tender support in functional area of expertise Job Description Roles and Responsibilities An electrical BOP engineer with strong design skills as an electrical BOP engineer, you’ll be responsible to: Preparation of Basic and Detail engineering documents – for Evacuation systems, Distribution systems, Auxiliary systems which majorly includes design memorandum, Single line diagram, sizing calculation and suppler specification of HV, MV, GIS, Transformer, XLPE, Illumination system, Low voltage AC and DC system, UPS system, Grounding system, Switchyard, Cable & cable tray, Electro-technical studies, Protection System, Excitation system, SFC/VSI systems etc. Analyze conditions reported from the field and determine actions needed to resolve problems, while maximizing Customer and GE profitability, and ensuring continued safe and reliable equipment operation Interact and collaborate with regional and global teams of engineers in resolving problems with tight time constraints Can prepare design calculations, technical specifications, drawings and BOM’s without supervision; Evaluation of vendor offer, Technical meeting with vendor, post order activity like Review and get approval of above system documents and drawings from client Review of various interfaces with internal client for various inputs/interface requirement & keep the record. Deliver work packages for large/Refurb projects or programs using technical guidelines, design reviews and feedback of experience (FOE); Can supervise the work of electrical BOP engineers and draftsmen to deliver design calculations, technical specifications, drawings and BOM’s; Produce schematics, technical specifications, testing procedures and all documentation required for electrical panels and electrical installation according to customer´s requirements Collaborate with consulting engineers and experts for FOE, design validation and root cause analysis (RCA). Apply rules and concepts for reliability, quality, safety and cost; Collaborate, support and partner with various internal and external functions like sourcing, construction & commissioning, projects, tendering, etc to drive reports, analytics, validation and supplier development. This is inclusive of meeting deadlines with for each activity Perform site surveys, customer meetings for design approvals and problem solving Provide dedicated and strong contribution to quality, productivity and cost out projects/Kaizen activities Know how on engineering tools ACAD, ETAP, EPLAN, Calculation software’s etc… Required Qualifications University degree in electrical engineering Min. 10 years’ experience in electrical engineering Knowledge of National and International standards i.e. Indian standards/International standards/ANSI/NFPA/Canadian electric standard/European standards Pro-activeness, sense of urgency, autonomy Strong written and verbal communication skills and leadership Knowledge of operation and maintenance aspects of electrical equipment Desired Characteristics Valuable experience in hydro project execution for electrical systems and/or BOP equipment design in reputed firms Ability to travel, foresee roadblocks and take immediate actions, work in a culturally diverse atmosphere Self-starter with initiative and interpersonal skills to direct projects and work, of cross- functional nature, with demonstrated ability to drive projects to completion Inclusive, considers ideas and inputs of others, and openly shares experience and knowledge with others creative and thirst for knowledge, always learning, show courage in driving concepts into reality Valuable experience in BOP electrical design calculation, short circuit analysis, NGT/NGR calculation, Relay settings methodology and parameterization, CT VT calculations, Insulation co ordination study Ability to meet deadlines and multitask, with strong comprehension, command on English language Works as a great team mate, in unity Understands business and team objectives, display good interpersonal skills, delivers as per com company’s integrity program What Do We Offer? Environment: A multicultural & diverse environment with an enthusiastic team and supportive leaders. We have a pleasant and modern work infrastructure at our offices Opportunities: We offer career growth opportunities, professional and personal trainings Benefits: We offer a competitive salary with multiple benefits like subsidized meals, medical, accidental & life insurance coverage. We provide home office opportunity and flexible working hours (subject to business and HR approval) Work model: Hybrid (3days office) Inclusion & Diversity: At GE Vernova, we believe in the value of your unique identity, background, and experiences. We are committed to fostering an inclusive culture, where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Please click here to learn more: www.gevernova.com/sustainability/thrive Additional Information Relocation Assistance Provided: Yes Show more Show less

About Lubrizol The Lubrizol Corporation, a Berkshire Hathaway company, is a specialty chemical company whose science delivers sustainable solutions to advance mobility, improve wellbeing and enhance modern life. Founded in 1928, Lubrizol owns and operates more than 100 manufacturing facilities, sales, and technical offices around the world and has about 8,000 employees. For more information, visit www.Lubrizol.com. We value diversity in professional backgrounds and life experiences. By enabling a consistent, unbiased, and transparent recruitment process, Lubrizol seeks to create a positive experience for candidates so we can get to know them at their best. We recognise unique work and life situations and offer flexibility, ensuring our employees feel engaged and fulfilled in every aspect of life. Summary Of The Role Enquiries related to mechanical – static equipment, from all the Lubrizol sites will be directed to this position & with his knowledge and expertise, this position is responsible to provide effective solutions and recommendations. The solution & recommendations for all the engineering aspects such as support while selection & design stage, preventive maintenance, reliability of equipment, help trouble shoot - diagnosing issues in case of repetitive failure, performance challenges & improvements opportunities for all type of mechanical -static equipment. This position is also responsible to leverage GCC capabilities to drive improve operational safety, achieve cost reduction by collaborating with global stakeholder within operation and procurement organization. This position is always updated with all the engineering standards, codes, Fabrication methods, latest industrial practices, new developments for the Static equipment used in the chemical process industry. This position will collaborate & engage with diverse team / experts within and outside Lubrizol, to seek correct solution / recommendations in timely manner. Responsibilities Lead the GCC capabilities in terms of providing solutions and suggesting recommendations on mechanical engineering aspects for all the inquiries received for mechanical equipment -static from various Lubrizol sites. Provide in time and most appropriate solutions / recommendations towards the problems and issues requested by engineering, maintenance and operation teams from various LZ sites. For Static Equipment- Continuously build the expertise, knowledge center with global engineering standards, fabrication codes such as (ASME, API, OSHA, ANSI, NFPA, PIP etc.), fabrication methods. Update self & team to improve GCC capabilities with new developments, latest industrial best practices, new equipment, evaluating performance parameters. Establish and maintain contacts with external subject matter experts-SME on unique equipment, critical material of constructions, special equipment construction, fabrication and operation so that this expertise can be readily utilized towards troubleshooting as and when required. Continuously interact and build the relationship with various LZ site engineering maintenance and operation team members To understand their repetitive problems, challenges, limitations so that effective solutions can be provided in timely manner. To explore opportunities for saving – standardization in coordination with procurement team. Maintain cordial cross functional relationship with other engineering team at GCC to leverage the solution providing capabilities of GCC. Keep the supervisor informed & take guidance to ensure the suggestions - recommendations provided are effective, optimum, best possible for under the situation. Be a part of large global team, ready to support across all the global sites all the time. Requirements (education, experience, competencies, and specific job requirements): Education, Experience & Industry Type BE / ME Mechanical engineer from a reputed university. 15+ years of overall experience. Last assignment (minimum 8 years) for mechanical engineering – preferably focus on static equipment streams in a consulting firm or design / technical services department of a large specialty chemical process industry Candidate should have ~ 5 years of actual field / shopfloor relevant experience in large specialty chemical process industry Strong and proven, in-depth, core expertise on the subject that makes him capable for the role & as well as capable for guiding / supporting – various Lubrizol site maintenance, operation, project & procurement team members. Experience in a Global organization environment will have clear advantage. Adequate working knowledge of Microsoft Office (also including Power point for presentations & spread sheets), Various forms of database Experience And Skills Static Equipment specialist with hands on, thorough in-depth knowledge and experience / exposure on typical process industry Equipment- Static Equipment listed below. Pressure vessels, Autoclaves, Jacketed vessels, LPG bullet, Liquid CO2 – Liquid N2 storage tanks. Silos, large chemical storage tanks up to 1000 KL Heat exchanges -Shell & Tube, PHE & other Cyclone separator, Liquid separators. Distillation column, Packed column scrubber, Dryers, FBD, Venturi scrubber, Surge tanks, Knock out pots, Demister, Deaerators, Static Mixers, Candidate is expected to have experience / exposure to at least 80% of the above listed equipment Candidate himself should have direct involvement, during some stage of his experience in detailing, specification, finding solutions – troubleshooting, interacting with vendors for the above listed equipment. Proficient in various codes for Mechanical Engineering (ASME, API, OSHA, ANSI, NFPA, PIP- Process Industry Practice etc.) Ability to understand the problem / requirements through remote interaction, asking prompt questions, analyzing provided data. Earlier experience of dealing / interacting with renowned local and global process equipment manufacturers and consulting firms is preferred. Attention to detail and accuracy, particularly understanding problems & exploring correct solution, suggesting optimum options / recommendation. Strong communication and interpersonal skills to effectively collaborate with the team & other LZ stake holders. Ability to work independently and collaboratively in a team environment. Analytical thinking and problem-solving abilities. Ready for your next career step? Apply today and let's shape the future together! It’s an exciting time to be part of Lubrizol. Lubrizol is not staying put. We are continually learning and evolving. Our passion delivers our success — not only for Lubrizol but for those who count on us every day: our employees, customers and communities. We work with a relentless commitment to operate safely and responsibly, keeping safety, sustainability, ethics, and compliance at the forefront of everything we do. The well-being of our employees, customers and communities is paramount to our culture and in the way we approach our work. As a diverse, global team, we work together to solve some of the world’s most pressing challenges. We impact everyday lives through science only Lubrizol can deliver, and we never stop pushing to do it better. One of the founding principles of The Lubrizol Corporation more than 90 years ago was treating every employee with dignity and respect. That same commitment is only stronger today. More than that, we are committed to providing an environment where every employee can be the best they can be, no matter their ethnic origin, religion, sex, national origin, sexual orientation, gender identity, disability or any other characteristic. Show more Show less

Sr. HVAC ENGINEER Location: Kerala (Local Candidates Preferred) Experience: 10+ Years (Oil & Gas Industry) Qualification - M-Tech in HVAC We are seeking a highly skilled and experienced HVAC Engineer with a strong background in the design, installation, and maintenance of HVAC systems, particularly in the oil and gas industry. The ideal candidate will have an M-Tech in HVAC Engineering and at least 5 years of hands-on experience in HVAC design, system optimization, and ensuring compliance with safety and regulatory standards in complex industrial environments. The HVAC Engineer will be responsible for designing and implementing HVAC systems that are efficient, cost-effective, and meet the specific operational needs of our oil and gas projects. Key Responsibilities: HVAC System Design: Design and optimize HVAC systems for oil and gas facilities, ensuring efficiency, safety, and sustainability. This includes air conditioning, ventilation, heating, and cooling systems for a variety of industrial applications. Load Calculations & Sizing: Conduct load calculations to size HVAC equipment such as chillers, air handling units (AHUs), ducts, and fans, ensuring optimal system performance. System Integration: Integrate HVAC designs with other mechanical, electrical, and plumbing systems, ensuring a seamless and functional approach that meets project specifications and operational needs. Energy Efficiency & Sustainability: Implement energy-efficient design practices and technologies to reduce operational costs and environmental impact while adhering to energy regulations. Compliance & Standards: Ensure all HVAC systems and designs comply with relevant codes, regulations, and industry standards (e.g., ASHRAE, NFPA, etc.) and company policies. Project Coordination: Collaborate with project managers, engineers, and other stakeholders to ensure HVAC system designs align with project schedules, cost constraints, and client requirements. System Optimization: Review and optimize existing HVAC systems to enhance performance, reliability, and cost-effectiveness while minimizing downtime and maintenance needs. Technical Documentation: Prepare detailed technical reports, specifications, and design documentation for HVAC systems, including schematics, layouts, and installation procedures. Troubleshooting & Support: Provide technical support for installation, commissioning, and troubleshooting of HVAC systems during the construction and operational phases. Risk Management: Identify and address potential risks and issues with HVAC system design, operation, or maintenance, implementing corrective actions as necessary. Mentorship: Assist and mentor junior engineers and technical staff, providing guidance and sharing knowledge of best practices in HVAC design and operations. Requirements: Educational Qualifications: M-Tech in HVAC Engineering or a related field. Experience: Minimum of 5 years of hands-on experience in HVAC system design, installation, and maintenance, preferably in the oil and gas industry. Technical Skills: oExpertise in the design of HVAC systems for industrial applications, including air conditioning, ventilation, and heating. oStrong knowledge of load calculation methods, equipment selection, and system performance evaluation. oProficiency in using HVAC design software such as Carrier HAP, Trane Trace, or similar tools. oKnowledge of energy-efficient technologies and sustainability practices in HVAC systems. oFamiliarity with regulatory standards such as ASHRAE, NFPA, and local building codes. Soft Skills: oStrong analytical and problem-solving skills. oExcellent communication skills, both written and verbal. oAbility to work independently and in cross-functional teams. oStrong attention to detail and ability to manage multiple projects simultaneously. Certifications (Optional): oLEED certification, ASHRAE membership, or other relevant certifications are a plus. Preferred Qualifications: Experience working in the design and implementation of HVAC systems for offshore platforms, refineries, or petrochemical plants. Knowledge of BIM (Building Information Modeling) software or similar tools for HVAC system design. Experience in system commissioning and troubleshooting in industrial or remote locations.  Show more Show less

How will you CONTRIBUTE and GROW? The Principal Engineer is part of the hierarchical organization, reporting directly to the Head of the Department as direct discipline superior. Principal Engineer is having strong ability in technical matters with profound knowledge of applicable Engineering principles and processes with an emphasis on safe, compliant, reliable, efficient and practical solutions required for the engineering design and execution of proposals and projects. Principal Engineer acts as the discipline lead engineer for various proposals and projects and is responsible to deliver the work within contractual framework, quality, and schedule and overall cost effectiveness, in order to meet the overall project desired results. Participates in the development and implementation of engineering practices, workflows and procedures; recommends and implements resulting specs and procedures. Participates in reviews of work activities and projects; monitors workflow. Consults with and makes recommendations to SME and Project Management Teams. Controls key parameters (KPIs), benchmarks and efficiency figures to be applied in estimating equipment, material and man-hours. Contributes to optimization of engineering practices, workflows and procedures based on collected KPIs. Coordinates and participates in the training programs for Engineers and Designers in the department. Ensures compliance to Discipline Manual and Job Manual during project execution to ensure that all contractual requirements are implemented and fulfilled. Ensures good quality of the deliverables for the design work. Ensures completion of WBS elements within allotted man-hours and schedule dates. Contributes to implementation of safety relevant principles, standards, rules and procedures. Manages the technical procurement activities for various types of equipment. Reviews and approves Vendor documents applicable for the Discipline. Attends to inspections as per requirement of the inspection department Site assistance through replying to site queries. Able to perform MHRS calculations using Discipline calculation tool. Technical Community Participates in the development of Discipline related technical standards, specifications and design criteria. Leads & coordinates Electrical Engineering for Projects. Has wide discipline knowledge; good coordination skill with all the other Engineering disciplines, engineering sub-contractors, vendors and construction teams. Review of client ITB and provide clarifications / deviations for such proposals, Prepare of estimates wrt Cost, Man-hours Technical Strength in Various Electrical Calculations such as Power Balance, Cable Sizing, Earthing Calculations, Lighting Calculations, Lightning Protection Calculations using various tools such as excel based & ETAP, DIALUX etc. Electrical System studies in ETAP for Short Circuit, Load Flow & Motor Starting Protection Relay coordination study Experience in preparation of Cable list & interconnection schedule Technical Strength in Layout engineering - Hazardous Area Layouts, Cable Routing (above &underground), Conduit & Tray Sizing, Earthing/Grounding Layouts, Lighting Layouts & Circuiting, Lightning Protection Layouts Experience in working & Co-ordinating with International Vendor Inquiry & Purchase requisition, Equipment data sheet, Technical bid evaluation for Electrical equipment ___________________ Are you a MATCH? Experience - 3- 20 Years of xperience in EPC or Detail design engineering company in the engineering discipline for execution of projects in various sectors like Oil & Gas, Air Separation, Energy, Refining, Petrochemicals Education: MTech /ME , BTech / BE - Electrical Engineering Experience in Inspections of Various Electrical Items ex Motors, Switchgears, UPS, DC systems etc. Vendor Drawing Review of Transformer, MV & LV switchgears, Capacitor Bank, UPS & DC system, Soft Starter, LV VFD, MV & LV Motor, Heater, DG, Cable Familiar with International Standards like NFPA, NEC, IEEE, ANSI, IEC, IS . Anticipation and Identification of risks and opportunities and recommend mitigations during execution Effective Communication skills with proactive coordination to manage interdiscipline workflow. Ability to identify cost optimization opportunities during project execution . Tool proficiency - ETAP, DIALux, Auto-CAD Experience in VSI & LCI Soft Starter, LV VFD Experience in working on Large Machines 5 MW and above Induction, Synchronous Motors & Turbines Our Differences make our Performance At Air Liquide, we are committed to build a diverse and inclusive workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their background. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world. Show more Show less

Ensure compliance with national and international electrical safety codes (e.g., NEC, IEC, NFPA 70E, OSHA). Perform electrical risk assessments , safety audits, and gap analyses. Oversee the implementation of lockout/tagout (LOTO) procedures and ensure proper electrical isolation practices. Review and approve electrical designs and installations for safety compliance. Investigate electrical incidents, near misses, and arc flash events ; identify root causes and corrective actions. Conduct training programs for staff on electrical safety, arc flash awareness, and safe work practices. Coordinate with project and maintenance teams to ensure safe execution of electrical work. Ensure proper maintenance and testing of protective devices such as circuit breakers, relays, and grounding systems. Maintain up-to-date knowledge of electrical safety innovations, regulations, and industry best practices . Provide guidance during commissioning, shutdowns, or emergency operations involving electrical equipment. Support HAZOP, HIRA, and other process safety analyses related to electrical systems. Job Types: Full-time, Permanent Pay: ₹10,000.00 - ₹65,000.00 per month Benefits: Provident Fund Schedule: Day shift Work Location: In person

Responsible for ensuring the safety and security of guests, employees, and hotel property by implementing and maintaining fire safety standards, conducting risk assessments, and ensuring compliance with all fire safety regulations. Required Skills Strong knowledge of fire safety regulations, codes, and emergency response procedures. Proficiency in using fire detection and suppression systems. Ability to conduct risk assessments and implement preventive measures. Excellent communication and training skills. Strong analytical and problem-solving abilities. Ability to work under pressure and respond effectively to emergencies. Basic knowledge of first aid and emergency medical response. Proficiency in report writing and documentation. Qualification Diploma/Degree in Fire Safety, Occupational Health Safety, or a related field. Certification in Fire Safety Risk Management (e.g., NFPA, NEBOSH, IOSH). This job is provided by Shine.com Show more Show less

Qualification: Diploma in Mechanical Engineering Experience: 2–5 years in fire protection system installation preferred Job Description: We are looking for a Site Supervisor to manage the installation of fire fighting systems (sprinklers, hydrants, pumps, etc.) at project sites. The ideal candidate will have hands-on experience in mechanical works, strong knowledge of fire safety codes (NFPA/IS), and the ability to lead site teams. Key Responsibilities: Supervise on-site installation activities Ensure work aligns with drawings and safety standards Coordinate with subcontractors and project teams Conduct testing and support commissioning Prepare daily progress and site reports Skills Required: Mechanical drawing reading Team supervision Site safety awareness Basic MS Office & reporting Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Schedule: Day shift Shift availability: Day Shift (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person Expected Start Date: 24/05/2025

Location: Sricity,AP Job Summary: Chungjeong Technology is looking for a proactive and technically sound site/project engineer( Fire Fighting,Mechanical.Plumbing HVAC & Cleanroom Project) Engineer to oversee project execution from planning to handover. The role involves coordinating with clients, internal teams, and contractors to ensure timely, cost-effective, and quality delivery of industrial projects. Key Responsibilities: Execute projects in line with design and quality standards. Manage site activities, installation, and commissioning work. Coordinate with clients, vendors, and cross-functional teams. Monitor project schedules, costs, and resource planning. Ensure compliance with NFPA,IS,TAC,GMP, ISO, and safety standards. Qualifications: Bachelor’s degree in Mechanical Engineering or related field. 7+ years of experience in SITE EXECUTION IN HVAC and cleanroom project execution,Fire Fighting,Plumbing and Fire alarm Knowledge of Fire fighting System, Fire alarm System, Plumbing , cleanroom protocols, HVAC systems, and project management tools. Strong problem-solving, communication, and leadership skills. Show more Show less

Job Description Be in charge for planning and design of all building services elements of the FF / GAS discipline. Design and Calculation knowledge based on NFPA, IS, BS standards. Middle East standards & local regulations. Knowledge on other Saudi, Bahrain /Qatar Regulations such as UAE Fire code and SBC Fire code regulations is added advantage & not mandatory. Knowledge on ANZ Region & AS standards is an added advantage to work on Australian/Singapore/NZ Region projects. Ensure all design / modelling work is carried out in accordance with Company’s quality standard procedures. Ensure producing of all design output and seamless coordination between other sections/disciplines. Ensure the completeness of design deliverables within time limits. Knowledge on Digital Automation of FF services [through Dynamo Scripting / Python Programming is added advantage]. Effective task management for during project schedules and timelines. Candidate Specification Candidate should be B.E./ B. Tech in Mechanical / Fire safety engineering discipline. Have 4 to 6 years of experience in Firefighting / Gas services Engineering design and knowledge on other MEP services. Have experience in high rise buildings / shopping malls / hotels / metro projects etc. Have experience in design of internal / external firefighting systems, sprinkler / spray system, internal and external hydrant system, Fire extinguisher system, Foam sprinkler design and clean agent gas suppression system design and checking of drawings and calculations. Be well versed in producing and checking of drawings and calculations. Good knowledge of relevant international codes and regulations. Handle modelling design independently and work efficiently. Have good oral and written communication skills and liaise with clients directly. Experience in relevant design software such as Auto CAD, REVIT, Navisworks. Knowledge on AECOsim / Open building Bentley software is an added advantage & not mandatory. Good Knowledge in any hydraulic calculation software such as Pipe-NET, Elite-Fire is an added advantage. Mott MacDonald is a leader in the adoption of BIM and therefore the use of Auto desk REVIT / Bentley AECOsim would be highly regarded. We Can Offer (subject To Company’s Policy) Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen’s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Bengaluru, KA, IN Noida, UP, IN Contract Type: Permanent Work Pattern: Full Time Market: Buildings Discipline: Building services Job Ref: 7129 Recruiter Contact: Deiveegan Show more Show less

ABOUT AGRATAS Agratas is a wholly owned subsidiary of Tata Sons. We design, develop and manufacture high-quality, high-performance, sustainable batteries applied to multiple use cases in the mobility and energy sectors, to match our customers’ requirements. Agratas is a scale-up business with a start-up mentality, driven by our pursuit of green growth and technological progress. We develop next-generation battery technologies at our state-of-the-art R&D Innovation Hubs in India and the UK. The Opportunity We are seeking a highly motivated and detail-oriented Process Engineer to lead the slurry mixing process in our Li-ion cell manufacturing operations. The successful candidate will be responsible for developing, optimizing, and maintaining the electrode slurry preparation process, ensuring quality, consistency, and production efficiency. A strong understanding of powder handling, flowability, and slurry rheology is essential for success in this role. • Business Expertise: Requires understanding of manufacturing engineering, quality systems, and how different departments (like R&D, supply chain and maintenance) work together. Knowledge of industry trends and competitor technologies is essential. • Problem Solving: Deals with complex issues such as process variability, yield loss, and equipment reliability. Requires analytical thinking, innovation, and adaptability to environmental factors like humidity and material behavior. • Nature & Area of Impact: Directly impacts production efficiency, quality, and cost. Influences the performance of teams and departments, contributing to business goals and overall competitiveness. Key Accountabilities and Responsibilities Process Design & Development: Design and establish scalable slurry mixing processes for cathode and anode materials (e.g., NMC, LFP, graphite). Knowledge of appropriate mixing technologies (e.g., planetary, high-efficiency, double planetary mixers). Define and optimize process parameters: powder feeding sequence, mixing time, RPM, vacuum level, temperature, and material addition order. Apply deep understanding of powder characteristics (flowability, cohesiveness, bulk density, Moisture test, etc) to ensure efficient material transfer and uniform dispersion. Develop the manufacturing process, including the design, control strategy and risk mitigation activity for key areas of the end-to-end production process. Scale-up & Commissioning: Responsible for the scale-up mixing equipment to mass production levels. Collaborate with equipment vendors to ensure effective powder handling and slurry mixing system integration. Support implementation plans and associated actions to ensure compliance with targets for OEE, yield, cycle time and product quality throughout the industrialization lifecycle Process Optimization: Continuously monitor and optimize mixing processes for consistency and efficiency. Apply rheological analysis and slurry flow behaviour studies to maintain desired coating and drying performance. Use data analytics to correlate slurry properties with coating and cell performance. Quality & Control: Ensure batch-to-batch consistency in slurry characteristics such as viscosity, solid content, particle dispersion, and flow behaviour. Implement inline/online monitoring systems for slurry and powder handling parameters. Conduct root cause analysis and implement corrective actions for slurry-related quality deviations. Knowledge, Skills and Experience Essential Ability to assess bulk solids flowability, particle size distribution (PSD), moisture sensitivity and flow function analysis. Familiarity with measuring and interpreting rheology parameters like slurry viscosity, yield stress, modulus and thixotropic behavior using rheometers. Capable of working with in-line sensors such as viscosity probes, pH meters, and density sensors for real-time process adjustments. Competence in using statistical tools (e.g., Minitab, JMP) to analyze process data and troubleshoot variability in powder dosing and slurry mixing. Desired Strong understanding of powder handling, slurry preparation, and chemical mixing processes in cell manufacturing or chemical manufacturing environments Experience with mixing equipment such as planetary mixers, high-shear mixers, and ball mills. Working knowledge of safety standards related to chemical handling and powder processing (e.g., MSDS, ATEX, NFPA) Strong communication and cross-functional collaboration skills to work effectively with R&D, quality, and production teams Understanding of industry standards for lithium-ion cell manufacturing (e.g., ISO, IATF 16949) Role Specific Qualifications/Certifications Bachelor’s or master’s degree in chemical engineering, Materials Science or a related field 3–10 years of experience in a manufacturing environment, preferably in cell/battery, chemical, FMCG or pharmaceutical industries. Show more Show less

Company Description Krishnatech is an ESO (Engineering Services Outsourcing) company specializing in consulting services for fire fighting system design and engineering. With expertise in a range of industrial projects, such as grain-based distilleries, waste-to-energy projects, thermal power plants, and pharmaceutical plants, Krishnatech also handles commercial projects like hospitals and infrastructure projects like tunnels. Role Description This is a full-time on-site role for an AutoCAD Drafter located in the Greater Delhi Area. The AutoCAD Drafter will be responsible for creating and modifying technical, shop, and architectural drawings. Day-to-day tasks include ensuring accuracy and compliance with project specifications, collaborating with engineers and architects, and maintaining project documentation. Qualifications Proficiency in Technical Drawing and Drawing Experience with Shop Drawings Skilled in Fire fighting system drawings like Hydrant, sprinkler, spray, foam, pump room etc. Strong attention to detail and accuracy and conversant with codes Like NBC, IS, NFPA, OISD etc. Ability to collaborate and communicate effectively with team members Experience with AutoCAD and other relevant drafting software Relevant degree in a technical field, such as drafting or architecture, is preferred Show more Show less

Company Overview Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, turboexpanders, services, and solutions for the liquefied natural gas (LNG), liquefied hydrogen (LH2), and industrial gases industries. Applications include fueling stations, marine engines, peak shaving, power generation, virtual pipelines, carbon capture, geothermal power and well stimulation. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with $1.5 B USD in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange. Job Overview The Technical Liaison / Champion will act as a bridge between the NESP function unit (FU) and the local engineering entity, ensuring alignment in engineering execution, technical standardization, and best practices. The role focuses on strategic projects, including CO₂ recovery/liquefaction, Amine Wash, small-scale LNG, and energy recovery solutions. This individual will lead technical coordination efforts to establish an Engineering Excellence Center, enhancing engineering capabilities within the local entity Responsibilities Essential Functions/Responsibilities Technical Coordination & Engineering Excellence Act as the primary technical interface between the NESP function unit and the local engineering team. Ensure seamless integration of FU engineering requirements into local entity workflows. Drive engineering best practices and standardization across CO₂ recovery, Amine Wash, small-scale LNG, and energy recovery solutions. Ensure compliance with industry standards (ASME, API, ISO, NFPA, etc.). Project Execution & Quality Assurance Guide the local engineering team to deliver error-free designs and calculations. Establish process workflows to improve engineering efficiency and reduce rework. Review and validate engineering deliverables to meet function unit expectations. Support feasibility studies, conceptual designs, and detailed engineering for strategic projects. Knowledge Transfer & Capability Development Facilitate training programs to enhance technical competencies in CO₂ recovery, Amine Wash, LNG, and energy recovery. Act as a mentor to local engineers, transferring knowledge from the function unit. Lead workshops and discussions on emerging technologies and innovative solutions. Stakeholder Engagement & Communication Collaborate with NESP function unit leaders to align engineering priorities. Provide regular updates on project progress, challenges, and solutions.Act as a liaison for suppliers and third-party vendors to ensure smooth project execution. Standardization and Compliance Ensuring technical decisions align with industry standards and company policies. Keeping up with regulatory requirements and certifications. Documentation and Knowledge Sharing Maintaining up-to-date records of technical discussions, decisions, and changes. Ensuring knowledge transfer across teams to build technical competency. Risk Management Identifying potential technical risks early in the project. Developing mitigation strategies to prevent delays and cost overruns. Authorities Approve technical solutions and design standardizations for strategic projects. Recommend process improvements to optimize engineering efficiency. Represent the local engineering entity in technical discussions with the function unit. Supervisory Responsibility This position has direct supervisory responsibilities and does serve as a coach and mentor for other positions in the department/organization. Provide technical guidance and mentorship to the local engineering team. Support talent development initiatives to build subject matter expertise in strategic projects. Coordinate workload distribution and ensure efficient resource utilization. Work Environment This job operates in a professional office environment. This role routinely uses standard office equipment such as laptop computers, photocopiers, and smartphones. Physical Demands While performing the duties of this job, the employee is regularly required to talk or hear. Specific vision abilities required by this job include close vision and ability to adjust focus. This would require the ability to lift files, open filing cabinets and bend or stand on a stool as necessary. Qualifications Required Skills and Competencies Technical Expertise: Strong understanding of CO₂ recovery, liquefaction, Amine Wash processes, energy recovery, and small-scale LNG. Experience in designing and optimizing process systems for strategic energy projects. Knowledge of industry codes and standards (ASME, API, NFPA, ISO, IEC, etc.). Project & Process Management: Ability to manage complex engineering projects while ensuring quality and efficiency. Experience in process optimization, standardization, and cost reduction initiatives. Collaboration & Communication: Strong interpersonal skills to coordinate between function unit and local entity. Ability to translate complex engineering requirements into clear, actionable deliverables. Problem-Solving & Decision-Making: Analytical mindset to identify and resolve technical challenges effectively. Ability to make informed decisions based on engineering data and project needs. Qualifications Education: Bachelor’s or Master’s degree in Mechanical or Process (or related field). Experience: 10+ years of experience in engineering, with a focus on strategic energy projects. Prior experience in a liaison or coordination role between global and local engineering teams is preferred. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice Show more Show less

A Snapshot of Your Day! Professional instrumentation and control engineer supporting Bid Management by specifying control system designs and compressor instrumentation. Support the Bid Team or proactively engage with customers on project specific questions on automation and compressor train instrumentation. How You’ll Make An Impact The control engineer leads the I&C portion of Turbo Compressor Trains, inquiry of components, comments and exceptions to the customer’s specifications, attending virtual or in person customer meetings Conceptual application of client’s requirements on (standard) control cabinets, coordination of internal interfaces, collaboration with global hubs, sales manager and proposal engineer to complete the technical offer Responsible for fulfilling on time all technical obligations committed by the Company, including those sub-contracted to external suppliers related to compressor control and instrumentation. Generate and issue requests-for-quotation for MV-Motors and MV-Converters based on project's specification and evaluate the feedback from sub-supplier. Coordinating interfaces for SE Electrical scope, e.g., E-Motor, VFD supplier, excitation panel and other related components. Issue Risk or Opportunity notification to Bidding Team regarding project cost schedule or equipment performance, including proposing of risk mitigation plans. We work in multi-functional teams generating and developing potential solutions to Product Requirement Specifications generated from Sales/Marketing analysis What You Bring Bachelor’s degree in electrical engineering or higher (or equivalent). Minimum 8 years of experience required with Electrical engineering background. Proven experience in the areas of large electrical MV motors, MV variable speed drive systems and vital auxiliary components, e.g., transformers, medium voltage switchgear, synchronizing and protection units. Experience in electric Motor design according to IEC60034, NEMA MG 1 and API 541/546. Understanding and applying Explosion Protection methods according to IEC 60079 and NFPA 70 NEC 500 / 505 2 or more years of Co-ordinating with multiple parties’ projects including internal project team members, client staff, vendors, sub consultants and general contractors. Strong soft personal skill i.e. phenomenal teammate, willingness for global corporation, open for multi-cultural relationships, intercultural competence, cost and schedule awareness. About The Team Our Transformation of Industry division is decarbonizing the industrial sector. Increasing electrification and efficiency are key and demand for green H2 and derivative fuels will rise. We enable decarbonization of the industrial sector and the transition to sustainable processes, building on a strong industrial customer base, a global network, diverse technologies, and integrated execution capabilities. Candidates want to learn about the divisions they will be joining–the structure, how it works together, and the role it plays in driving Siemens Energy’s mission forward. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies crafted in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our distributed team is committed to making balanced, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: https://www.siemens-energy.com/employeevideo Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards/Benefits Employees are eligible for Remote Working arrangements up to 2 days per week. All employees are automatically covered under the Medical Insurance. Company paid considerable Family floater cover covering employee, spouse and 2 dependent children up to 25 years of age. Siemens Energy provides an option to opt for Meal Card to all its employees which will be as per the terms and conditions prescribed in the company policy as a part of CTC, tax saving measure Flexi Pay empowers employees with the choice to customize the amount in some of the salary components within a defined range thereby optimizing the tax benefits. Accordingly, each employee is empowered to decide on the best Possible net income out of the same fixed individual base pay on a monthly basis https://jobs.siemens-energy.com/jobs Show more Show less

Job Title: Product Manager – BESS Container Solutions Location: Mumbai Reports To: Head of Business Development – BESS About Waaree Waaree is one of the world’s leading clean energy companies with a strong presence across solar modules, integrated supply chains, and now Battery Energy Storage Systems (BESS). As we expand our portfolio of containerized BESS solutions for global utility, C&I, and microgrid markets, we are seeking technically sound and commercially sharp professionals to support pre-sales and solutioning efforts. Role Overview: Waaree Group is seeking a technically strong and market-savvy Product Manager to lead the development and lifecycle management of containerized Battery Energy Storage Systems (BESS) for utility-scale applications. The ideal candidate will have deep technical knowledge of BESS architecture, thermal and electrical systems, and energy management controls, paired with strong product strategy and cross-functional coordination skills. This role will serve as the key technical-commercial interface between engineering & designing, business development, operations, and customers to ensure Waaree’s BESS solutions meet market needs, grid requirements, and commercial goals. Key Responsibilities: Product Development & Technical Oversight: Own the product roadmap for containerized BESS solutions targeting utility-scale applications (5MWh to 100MWh+ systems). Define product specifications in coordination with engineering teams – including battery chemistry selection (LFP/NMC), thermal management systems, PCS integration, EMS/SCADA, container layout, and fire suppression. Lead competitive benchmarking and technical positioning of Waaree’s BESS offerings. Work closely with suppliers and internal teams on battery packs, enclosures, inverters, BMS/EMS, HVAC, and safety certifications (UL9540A, IEC, etc.). Customer & Market Alignment: Translate utility customer needs, interconnection requirements, and project-specific demands into actionable product requirements. Support the BD team with technical documentation, solution presentations, and pre-sales engineering for RFQs, tenders, and EPC proposals. Interface with key stakeholders including utilities, IPPs, developers, and regulatory bodies to capture evolving grid standards and market needs. Analyze policies, their impact on the business, and provide actionable insights to the business development and designing team. Project & Lifecycle Management: Manage the end-to-end product lifecycle – from concept design, sizing . product BOM, cost targets, and drive cost-down initiatives in collaboration with procurement and engineering teams. Own documentation including product datasheets, O&M manuals, installation guidelines, and test protocols. Cross-Functional Collaboration: Coordinate with internal teams across engineering, supply chain, QA/QC, and manufacturing (India & International). Support after-sales and service teams to troubleshoot and continuously improve deployed systems. Key Requirements: Education & Experience: Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, , or a related technical field. 3-5 years of experience in BESS product management, solutions engineering, or systems integration and 10-15 years of overall experience. Hands-on experience with containerized BESS systems, ideally for the utility or C&I segments. Technical Skills: Deep understanding of BESS system design: batteries (LFP preferred), BMS, PCS, HVAC, fire suppression, thermal modeling. Familiarity with grid-scale use cases: frequency regulation, peak shaving, solar/wind hybrid integration, and capacity firming. Knowledge of applicable standards: UL9540, UL9540A, IEC 62933, NFPA 855, and grid interconnection codes. Proficiency in system sizing tools, electrical drawings, , and simulation tools Other Competencies: Strong project management, communication, and cross-functional collaboration skills. Ability to travel as needed for supplier visits, field deployments, or customer engagements. Show more Show less

Company Overview Reliance Industries Limited embodies the spirit of Growth is Life. As a Fortune 500 company and the largest private sector corporation in India, we are committed to innovation-led growth across various sectors, including hydrocarbon exploration, petrochemicals, and telecommunications. Our global leadership, especially as the largest producer of polyester yarn and fiber, reflects our ambition and the legacy of our founder, Dhirubhai Ambani. Headquartered in Navi Mumbai, Maharashtra, Reliance aims to positively impact lives worldwide. Visit our website. Job Overview The Fire Engineer position at Reliance Industries Limited is a full-time role based in Bharuch. This role is crucial in ensuring fire safety standards and implementing advanced fire protection measures within our facilities. The successful candidate will use specialized skills to conduct fire dynamics simulations, ensure NFPA standards compliance, and perform comprehensive fire risk assessments. Applicants are expected to bring innovation and expertise in fire safety systems and analysis. Job Accountability Immediate response to all emergency calls including mock drills and mobilization of required resources to mitigate the emergency. Develop/Evaluate the Risk Assessment (RA) sheet for the specific job and make necessary modifications therein, Provide necessary guidance to shift fire executive during routine shift activities and during emergency operations. Participate in Risk Assessment sessions at plant level for all critical jobs and ensure adequate fire prevention measures during such activities in the plant including plant turnarounds Carryout resource planning and allocation Exhibit Incident Command & Control technique for emergency control & mitigation. Impart training of Shift fire personnel and others Ensure availability of all firefighting equipment/systems and communication systems on ready to use basis. Assure reliability/performance of fire vehicles on fire vehicles and jeeps. Suggest & ensure corrective measures based on the incident analysis. Ensure material availability and inventory management of charged store at all fire stations. Carryout Fire safety inspection round of the plant Carryout preliminary investigation all incidents and release Turnout report on incident Organize and conduct daily fire drills and PT Ensure the compliance of all scheduled activities in his shift at all fire stations Assist site fire prevention initiatives Ensure compliance with fire safety standards, procedures, practices and checklist Maintain Log book, Occurrence book and other shift related documentation. Skill Recognise the potential escalations/hidden hazards and Apply Fire Fighting Strategies for a given process, tank farm or Marine emergency scenario as applicable to area of work Judge & Guide the emergency response team for effective termination of emergencies Ability to liase with various emergency responders and incident commander for formulating the attack Plan Application and make use of different firefighting equipment, consumables, systems and other resources for effective emergency Management High level of proficiency in Fire Safety Management Planning and decision making ability Education : B.E. - Fire Engineering Experience : Over 3 years of relevant work experience for engineering graduate / Over 12 years of relevant work experience for Station fire officer or Grad I / Over 16 years of relevant post qualification experience for Sub officer Show more Show less