1644 Hydraulics Jobs - Page 31

Client: Arabian Machinery & Heavy Equipment Company (AMHEC) Work Location: Dammam, Saudi Arabia Interview Location: Delhi & Chennai Position Title: Heavy Equipment Mechanic Job Purpose The main purpose of the Mechanic position is to perform all mechanical repairs, inspection, preventive maintenance, installation, and troubleshooting of heavy & light vehicles and equipment. Duties and Responsibilities Repair and maintenance of diesel engines, steering mechanisms, transmissions & braking systems of heavy trucks. Repair and maintenance of both pneumatic and pneumatic cylinders, valves & control systems. Perform basic electrical repairs and repair/replace broken or dysfunctional parts. Travel to client’s locations and perform required maintenance activities. Perform inspections on allocated cranes/equipment/trucks/light vehicle for repairs to ensure complete and progressive preventative maintenance of the same. Perform main components overhauling, e.g., engine, transmission, hydraulic pumps. Perform preventative maintenance on heavy and light vehicles, cranes, and aerial work platforms. Adhere to an inspection procedure checklist and preventive maintenance guidelines. Ensure the cleanliness of workshop and work area. Adhere to Safe work procedures and complete risk assessments before commencing any work. Identify and diagnose parts for replacement worn parts and equipment for repairs. Determines equipment condition by conducting inspections and diagnostic tests. Carry out all scheduled PM activities on the AMHEC’s equipment (i.e. Cranes, wheel loaders, forklifts, man lifts, generators backhoe loaders, tower lights, trucks, vehicles …etc) including replacement of all types of oils, filters, greasing, visual inspection, cleaning, recording. Correct equipment deficiencies if exist along with preventive maintenance work order. Perform adjustments to various equipment systems during preventive maintenance service. Maintaining detailed records of serviced equipment. Report daily to direct manager regarding status of allocated work. Complete job reports and process paperwork. Report to direct manager regarding status of allocated work. Keep the direct manager informed whenever found any issue with the equipment. Performs miscellaneous tasks as assigned by his/her direct manager. HSE Responsibility QHSE Authority Identifies any Health, Safety or Environmental risks and recommends and implements measures and solutions to mitigate these risks. Complies with established health and safety guidelines and procedures and ensures the health, safety and welfare of self and others. Identifies and reports to management any Health, Safety or Environmental risks and makes suggestions to address these risks and cooperate with his/her supervisor’s instructions. Contribute to the QMS: to contribute to the effectiveness of the quality management system (QMS) by implementing processes in accordance with their roles and responsibilities. Participate in Training and Apply Competence: to participate in training programs to develop and maintain the necessary competence for their roles, and to apply their competence to perform work activities and contribute to the effectiveness of the QMS. Follow Procedures and Control of Production and Service Provision: to follow documented procedures and work instructions relevant to their work. Report Changes and Nonconformities: to report any changes in their work environment or processes that could affect the conformity of AMHEC's products or services, report any nonconformities and suggest corrective actions to prevent their recurrence. Qualifications High school technical diploma or equivalent. Having (2-3) years of related Experience. Diesel Engines, Hydraulics, Pneumatic, Schematics reading for troubleshooting. Excellent troubleshooting skills. Basic electrical knowledge. Hand & Power Tool skills. Driving license is a plus. Read, Write & Speak English Language. Ability to read parts book, workshop manual, schematic. Skilled in repairing and fixing hydraulic and basic electrical issues. Knowledge in preparing reports and keep logs on work issues. Working knowledge of basic hydraulic and electrical circuit. Working Conditions Nature or work may require working beyond standard working hours. Physical/Travel requirements Travel (up to “On Request”) within the Kingdom of Saudi Arabia to AMHEC’s sites, yards, and branches. While performing the duties of this job, the employee is regularly required to stand, walk; use hands to finger, handle, or feel; and talk or hear. The employee is occasionally required to reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl.

1. Required Diploma/ITI with minimum 4-5 Years of hands-on experience on Pre-Commissioning Commissioning Trouble shooting of Wellhead Control Panels Hydraulic Power Units at off-shore onshore Oil & Gas Installations. 2. Familiarity with pneumatic, hydraulic and electronic logic components will be required. 3. The candidate should possess good communication and problem-solving skills. 4. Ability to undergo and pass the basic offshore survival course is essential. Pls sent your resume mentioning the Below details Present CTC : Expected CTC: Company Name : Current Location:

About Us: Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: About Barry Wehmiller: - Barry Wehmiller Companies is a global supplier of manufacturing technology and services based in St. Louis Missouri. Although it was founded in 1885 as a maker of machinery for the brewing industry, since 1987 Barry-Wehmiller has acquired more than 80 companies that provide equipment and services for a variety of industries: packaging, paper converting, sheeting, corrugating, engineering, and IT consulting. In 2016 it was ranked no. 10 on the St. Louis Business Journal's list of the city's Top 150 Privately Held Companies. We believe our culture differentiates us from other firms. In India, Barry-Wehmiller operates as a hub of innovation and collaboration, housing our Global Competency Center (GCC) and other strategic functions. The GCC, based in Chennai, is an Engineering Center of Excellence that supports all Barry-Wehmiller divisions globally. The center focuses on areas such as design and development in mechanical, electrical, and controls engineering, software development, and additive manufacturing. We believe in: Ownership – You’ll drive features end-to-end, from design to deployment. Flexibility – A friendly, results-oriented culture that respects your time. Empowerment – Your insights are valued, and your work makes a visible difference. Learning & Growth – You’ll work on complex challenges with smart, passionate peers—and have the support to level up continually. If you’re ready to bring your best thinking to the table and grow in a high-impact, future-focused environment, we’d love to hear from you. Job description: Well experienced Mechanical Engineer with 5+years of experience adept in New Product Development, Conceptual Design, Engineering Design and Detailing, Engineering Calculations, BOM release, Production and Testing Support for Industrial Machineries and Equipment such as Printing, Packaging, Converting, Textile and Paper machineries and discrete product machineries. Roles & Responsibilities New Product Development Design of product line variants Design modifications of existing machines Engineering Calculations Concept Development Detailed Design Detail drawings and Bill of Materials release using SolidWorks (2018 & above)/EPDM and Infor XA applications as per client standards Perform concept/design/manufacturing reviews and participate in testing, safety, installation, commissioning and troubleshooting reviews with customer. Perform risk assessments of new designs using DFMEA or similar techniques. Acquiring and maintaining knowledge in functional specifications, design intents and latest developments in the industry related to client product lines. Education and experience: Bachelor’s degree in Mechanical Engineering. 5+ years of experience in Industrial Machineries and Equipment, discrete product machineries. Experience in Printing, Packaging and Converting Machines OEM is preferrable. Technical Skills: Sound knowledge in mechanical engineering design principles. Excellent knowledge in manufacturing process. Extensive knowledge in engineering calculations. Experience in calculation and selection of commercial components such as bearings, gearbox, couplings, motors, pneumatics/hydraulic components, linear/rotary actuators, etc.). Knowledge of electrical components, sensors, encoders, etc. Experience in handling large assemblies using SolidWorks (2018 & above). Knowledge in the principles of operation of industrial machineries such as Printing, Packaging and Converting Machines, Textile machines, Paper machines and discrete product machineries. Experience in material selection based on functional requirement and application of manufactured and commercial components of industrial machineries and equipment. Extensive knowledge in global material standards and specifications of commonly used materials in industrial machineries and equipment. FEA using SolidWorks simulation (experience in structural and dynamic analysis using ANSYS is an added advantage). Knowledge in Metric and Imperial (Inch) Design Standards. Knowledge in servo motor & gearbox selection and drive calculations. Experience in creating and updating functional specifications of machines Experience in replacement of obsolete commercial components by maintaining Form, Fit and Functions of the existing design of the machines. Experience technical problem-solving skills and providing out of the box solutions for complex problems. CAD modeling and detailing using SolidWorks is mandatory, experience in Creo and UG is an added advantage. Excellent knowledge in GD&T and tolerance stack-up analysis. Experience in Value Engineering and Cost Optimization using FAST or similar techniques. Mandatory Skills: Good understanding of mechanical functions and principles. Ability to follow a prescribed engineering process. 3D CAD software proficiency: SolidWorks (Must) / Inventor (Must) / Creo (added advantage). Familiarities with Electrical / Controls / Pneumatics and hydraulics basics. Ability to work as team MS Office applications (Outlook, Teams, Excel, Word, PowerPoint, etc.). Travel: May need to travel up to10% each year based on requirements. What is in for you? This role is more than just a job. It’s an opportunity to be part of a global team that values people excellence, innovative solutions, and operational excellence. Barry Wehmiller provides a unique environment where you can grow your skills, work on impactful projects, and collaborate with some of the brightest minds in the industry. In addition, we are deeply committed to your personal and professional growth, fostering a culture that helps you achieve your full potential. We offer a culture that values autonomy, ownership, and flexibility. You’ll have the freedom to experiment, influence product decisions, and see your work through—from idea to delivery. Our teams are collaborative, agile, and outcome driven, with trust placed in every individual to make a meaningful impact. To understand more about our people-first philosophy, you may like to watch this short video by our CEO, Mr. Bob Chapman , on Truly Human Leadership : Watch the video At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work—therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Company: BW Corporate GCC

Required Key Skills: Open die forging press,/Hammer maintenance, Hydraulics, Manipulator, Hydraulic Pumps, Hydro motors, Hydraulic power pack, servo valves, proportional valves, Hydraulic piping, TIG Welding, troubleshooting in hydraulic systems, Prefill valves, Heavy cylinders repairing. Heavy machinery maintenance, PM, Condition monitoring Requirements: 3+ years of experience in open die press and Close Die Press/Hammer and maintenance. Mechanical Engineering (Degree or Diploma). Strong understanding of press/ Hammer and processes. Excellent communication and interpersonal skills. Ability to work both independently and as part of a team. Key Responsibilities: Preventive & Predictive Maintenance: Plan and execute preventive maintenance schedules for closed die hammers, power presses, furnaces, cooling systems, and hydraulic systems. Maintain records of maintenance activities and equipment history. Breakdown Maintenance: Diagnose and troubleshoot mechanical issues in hammer machines, bolster beds, dies, and associated equipment. Coordinate quick and efficient repairs to reduce downtime. Equipment Handling: Manage the upkeep of forging hammers (Bell drop hammers, pneumatic hammers, Press), Ensure optimal functioning of pneumatic and hydraulic systems. Spare Parts Management: Identify critical spare parts and maintain inventory. Raise purchase requisitions and ensure timely availability of spares. Safety & Compliance: Ensure all maintenance activities follow safety protocols and statutory regulations. Participate in safety audits, 5S, and root cause analysis for incidents or near misses. Team Coordination: Lead and guide maintenance technicians during shift operations. Coordinate with the production team for planning shutdowns and repairs. Continuous Improvement: Contribute to process improvements to reduce machine downtime and improve equipment reliability. Participate in Kaizen, TPM, or other plant improvement initiatives. Preferred candidate profile A candidate with experience in mechanical maintenance from Forging (Hammer Shop) Industry On Roll of : Veez International (Managed by Viraj)

Process Validations : You will validate manufacturing processes to ensure they meet quality and efficiency standards. Special Purpose Machines (SPM) : You will be involved in creating specifications, finalizing concepts with cross-functional teams (CFT), and overseeing the installation, commissioning, and validation of SPMs. Low-Cost Automation : You will implement low-cost automation solutions to improve efficiency. Process Layouts : You will design and optimize process layouts for new lines and existing ones. Online Troubleshooting : You will provide on-the-spot troubleshooting for tooling and process-related issues on the production line. Error Proofing : You have experience implementing error-proofing (poka-yoke) techniques to prevent defects. Quality & Documentation You will ensure the highest quality standards are met through rigorous documentation and audit processes: Process FMEA : You have hands-on experience conducting Process Failure Mode and Effects Analysis (PFMEA) . Customer Audits & PPAP : You have experience with customer audits and the Production Part Approval Process (PPAP) . Quality Systems : You have a strong knowledge of quality management systems like IATF and TQM , as well as Industrial Engineering and Line Balancing . Technical & Financial Knowledge You will combine technical skills with an understanding of financial implications: Pneumatics & Hydraulics : You have a strong understanding of these systems. Process Costing : You have both knowledge and hands-on experience related to process costing, ensuring financial viability.

Role Summary: Ensure smooth functioning of all mechanical equipment, from mixers to conveyors. You'll own preventive maintenance and rapid response to breakdowns. Key Responsibilities: Maintain and troubleshoot equipment like conveyors, mixers, baggers, vacuum pumps, sealing machines and etc. Plan and execute preventive maintenance schedules Support machine installation, alignment and upgrades Coordinate with vendors for spares and service Maintain mechanical logs and downtime analysis Qualifications: Degree/Diploma in Mechanical Engineering 2–5 years of experience in factory or plant maintenance Understanding of motors, gear systems, hydraulics, pneumatics Ability to work hands-on and independently under pressure Job Type: Full-time Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

Urgent # Automation & BMS Trainer # Location: Palakkad Job Overview: As a Project Engineer – Training Division , your primary responsibility will be to train candidates in industrial automation and BMS technologies. You will conduct in-house and online training, prepare technical content, and support customer education as needed. Key Responsibilities: Design and deliver practical training programs and workshops in: Automation Systems: PLC, SCADA, HMI, VFDs Building Management Systems (BMS): CCTV, Access Control System (ACS), PAGA, LAN, Telephone System, TRS, FIDS, MCS Electronics & Electrical Systems: Electro-Hydraulics & Pneumatics Conduct sessions for students, working professionals, system integrators, and corporate clients. Prepare and manage training kits, documentation, videos, and technical manuals. Handle student queries and ensure conceptual clarity through real-time project examples and simulations. Coordinate and consult on new technologies to keep training content up to date. Prepare demo applications for product demonstrations and customer training. Create and manage a repository of up-to-date technical information (manuals, wiring diagrams, brochures). Deliver seminars and remote training through platforms like Zoom, Google Meet, Teams, etc. Travel to customer sites for on-site training sessions as needed. Assist in technical support and act as a technical coordinator when required. Develop relevant and engaging digital learning content for online platforms and internal use. Required Skills and Qualifications: Bachelor’s/Diploma in Electrical, Electronics, Instrumentation, or a related field. Minimum 0 - 1 year of experience in training or industry in automation or BMS. Strong practical knowledge of PLC, SCADA, HMI, VFDs, and relevant BMS systems. Ability to clearly explain technical concepts to varied audiences. Strong communication, presentation, and interpersonal skills. Ability to create high-quality training documents and multimedia content. Willingness to travel occasionally for onsite training and seminars. Preferred Qualifications: Certification in PLC/SCADA/BMS or related automation systems. Experience in EdTech, corporate training, or academic instruction. Knowledge of multimedia tools for video and content creation. Job Type: Full-time Pay: ₹15,000.00 - ₹22,000.00 per month Benefits: Life insurance Schedule: Morning shift Supplemental Pay: Overtime pay Yearly bonus Work Location: In person

Do you enjoy creating innovative and strategic solutions to solve complex problems? Are you passionate about Control Valves Design and Engineering? Join our Industrial & Energy Technology Team Our Industrial and Energy Technology (IET) operates across 120 countries and serves the entire energy value chain and industrial sector. We hold an extensive portfolio of rotating equipment, process flow, transmission technology and lifecycle services. Our Engineering Transformation teamwork to improve the quality of our Engineering processes. Partner with the best As an Engineer - Mechanical Component, you will be executed, with guidance from senior engineering resources. Configure the design or integration required to define. And support assigned components, assemblies, or systems that meet business standards and program/product requirements. As an Engineer - Mechanical Component, you will be responsible for: Developing /configuring valve/actuator designs and participating in design reviews as needed. Defining material and quality requirements for the control valve components based on applications and customer requirements. Being hands-on use of design tools (like 2D / 3D CAD / SolidWorks / ProE / UG), Excel, and in-house design calculations. Working with the design team to improve productivity using design automation. Also, Prepare and present technical data to internal and external customers. Engaging with teams assigned to address specific organizational initiatives. Also, Work seamlessly across other functions/ multiple global sites to help meet the organization's goals/objectives. Assuring proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Ensuring product safety and compliance with global codes, standards, and regulations such as ASME, FM, PED, ATEX Executing the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product/program requirements. Executing routine analyses using vested methods and technologies and/or contributing to technological developments in teams under supervision. Working together with people from the business unit. Contacts are under the guidance and/or geared towards collecting or giving technical information. Fuel your passion To be successful in this role you will: Have a Master's / Bachelor's in Mechanical Engineering from an accredited college or university with exposure/experience in Engineering Design/Analysis. Have 1 to 3 Yrs years of experience in an Engineering Design/ Analysis/ Scientific/ Technical Position. Have a good knowledge of Control Valve Design / Instrumentation Expertise. Have exposure/understanding of Control Valve functionalities/design. Have good mechanical engineering/design fundamentals. Have exposure to Valve Design, instrumentation and control engineering, materials, and coating processes. Have Knowledge of pneumatics/hydraulics and a passion for automation and coding. Work in a way that works for you We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns: Working flexible hours - flexing the times when you work in the day to help you fit everything in and work when you are the most productive Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged, and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train, and reward talent, and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect: Contemporary work-life balance policies and well-being activities Comprehensive private medical care options The safety net of life insurance and disability programs Tailored financial programs Additional elected or voluntary benefits About Us: We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for people and the planet. Join Us: Are you seeking an opportunity to make a real difference in a company that values innovation and progress? Join us and become part of a team of people who will challenge and inspire you! Let’s come together and take energy forward. Baker Hughes Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. R150239

Position Summary: This positions shall be based at Bawal ( Rewari) as a Service Engineer and will be responsible for Installation, Breakdown, Service Maintenance for Injection molding machine. Work You’ll Do: To Provide End-to-end support to customers from Installation of Machines to breakdown calls, machine problems, Spare Support, Training for Machine Operating, Processing Problems, etc. Coordinate pre-installation requirements with customers Developing & Implementation of the Corrective / Preventive actions for any Machine & further ensuring the Global Action of All Machines. Responsible for troubleshooting and providing solutions to overcome the problem. Responsible for installation and servicing of all machines in the region. Providing support to customers for Mould Trials (In–house & on-site) for Machine Shipment. Responsible for Assembly of Machines & Machines operations at Customer Site Provide training to customers for the Machine Operating & Trouble Shooting of Machine Issue Submitting the Field return part to the factory for analysis as well as to recover the cost of warranty of the part. Releasing flash for parts failure. Ensure customer training and customer care visit. Generation of Spare Parts Business & Developing the Spare Parts recommendation Preparing & Submission of Service Report for each machine Maintaining Software Backup / Hydraulics Circuits & Bill of Material on Service Portal Team: This role shall be part of the Delhi regional service team. Basic Qualifications: Completed full time Diploma/Degree in Mechanical / Electronics / Plastics / Mechatronics with 2-6 years experience in testing/maintenance/service of Injection molding machine. Who we are: Milacron is a global leader in the manufacture, distribution and service of highly engineered and customized systems within the $27 billion plastic technology and processing industry. We are the only global company with a full-line product portfolio that includes hot runner systems, injection molding, extrusion equipment. We maintain strong market positions across these products, as well as leading positions in process control systems, mold bases and components, maintenance, repair and operating (“MRO”) supplies for plastic processing equipment. Our strategy is to deliver highly customized equipment, components and service to our customers throughout the lifecycle of their plastic processing technology systems. EEO: The policy of Milacron is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. We are committed to being an Equal Employment Opportunity (EEO) Employer and offer opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@milacron.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

JD: .Routine Machine & Equipment health checkup .Improvement in Machine & Equipment Uptime .Power cost reduction .Maintenance & Utility cost reduction .Machine Spares management .Preventive, Predictive & Breakdown maintenance .Press Machine clutch & brake assembly/dis assembly Can work on the Pneumatic, hydraulic & mechanical/electrical systems of Press M/c, Weld SSW & Robotic programming/troubleshooting Had worked on VFD, Servo Drives & Induction drives Working Knowledge on types of welding controllers. Can check the Parallelism, Perpendicularity & Gib clearance of Press M/C Have worked on solenoid valves etc. He must have knowledge & skill of handling the MIG welding Robots with strong expertise in PLC Logic. Immediate joiner to be preferred

Job Summary: We are seeking a skilled and proactive Mechanical Engineer to join our engineering team in the FMCG industry. The ideal candidate will be responsible for maintaining and improving plant machinery, ensuring minimal downtime, and optimizing mechanical systems for enhanced productivity and efficiency. Key Responsibilities: Perform preventive and corrective maintenance of mechanical systems including conveyors, packaging lines, pumps, motors, and utilities. Troubleshoot mechanical breakdowns and ensure quick resolution to minimize downtime. Work closely with production and quality teams to ensure machinery runs efficiently and complies with safety standards. Lead mechanical modification and upgradation projects for productivity improvements. Ensure proper documentation of maintenance schedules, logs, and spare parts inventory. Coordinate with OEMs/vendors for spares and technical support. Implement 5S, TPM, and other lean maintenance methodologies. Key Skills & Qualifications: Bachelor’s degree in Mechanical Engineering or related field. Strong knowledge of mechanical systems, pneumatics, hydraulics, and rotating equipment. Experience with FMCG manufacturing machinery such as filling, sealing, labeling, or packing lines is preferred. Good understanding of safety, GMP, and ISO standards. Ability to read and interpret engineering drawings. Proficiency in using CMMS tools (Computerized Maintenance Management System). Job Summary: We are looking for a dedicated Instrumentation Engineer to support instrumentation and control system operations at our FMCG manufacturing facility. The role includes installation, calibration, troubleshooting, and maintenance of field instruments and automation systems ensuring consistent quality and plant performance. Key Responsibilities: Install, calibrate, and maintain field instruments like flow meters, pressure sensors, temperature transmitters, load cells, etc. Troubleshoot instrumentation issues in production and utility systems to ensure minimal downtime. Manage PLC/SCADA control systems – basic programming, monitoring, and fault finding. Ensure accurate functioning of weighing systems and process control instruments in compliance with QA/QC standards. Collaborate with mechanical/electrical teams to integrate instrumentation into operations. Ensure documentation and adherence to preventive maintenance schedules for instruments. Maintain SOPs and calibration records as per industry and regulatory requirements. Key Skills & Qualifications: Bachelor’s degree in Instrumentation Engineering, Electronics, or related discipline. Hands-on experience in FMCG/Pharma/Food & Beverage plants is preferred. Knowledge of PLC (Siemens, Allen Bradley, etc.) and SCADA systems. Familiarity with calibration techniques and tools. Strong analytical, problem-solving, and documentation skills. Understanding of safety and compliance standards in a manufacturing setup. Job Type: Full-time Pay: ₹25,000.00 - ₹40,000.00 per month Benefits: Health insurance Paid sick time Provident Fund Schedule: Day shift Work Location: In person

HIRING FOR SALES & APPLICATION ENGINEER FOR INDUSTRIAL PRODUCTS Sales and Application Engineer BE/Diploma in Mechanical Engineering/ EEE/ITI Experience- 0.5 to 01+ years Key Skills-Field sales , Pneumatics or Hydraulics knowledge, good communication skill in regional language and English, customer convincing skill, extensive customer base knowledge related to hydraulics or pneumatics in regional areas. Basic Requirement: Four Wheeler License must Salary-15K - 20k Negotiable Immediate Joiner & Less than 30Days Working days-Monday to Saturday Time-9am to 6pm INTERESTED CANDIDATE DROP THEIR RESUME AT enquiry.mjmachines@gmail.com CONTACT PERSON-Mr. Jainith Patel CONTACT NO- 8488837319 Job Type: Full-time Pay: ₹12,000.00 - ₹20,000.00 per month Schedule: Day shift Work Location: In person Application Deadline: 29/07/2025

Job Title: Mechanical Engineer – Machine Operations & Maintenance Location: Nadarganj Industrial Area, Lucknow Department: Engineering / Production Industry: Cushioning Material Manufacturing – Indian Railways & Commercial Applications Salary Range: ₹20,000 – ₹30,000 per month (based on experience and skill level) Reports To: Plant Head / Production Manager Job Summary: We are looking for a passionate and hands-on Mechanical Engineer to join our manufacturing team. The ideal candidate should have a strong understanding of industrial machines used in foam production, be eager to learn machine repair and maintenance, and have a genuine interest in machinery and engineering. The role involves overseeing machine operations, supporting production, learning repairs, and contributing to continuous improvement in equipment performance. Key Responsibilities: Operate, monitor, and support the daily functioning of production machinery used in foam manufacturing. Learn and assist in troubleshooting and repairing mechanical breakdowns under the guidance of senior technicians. Regularly inspect machines to ensure proper operation and schedule preventive maintenance. Understand machine manuals, drawings, and basic schematics for foam production equipment. Coordinate with the production team to minimize downtime and optimize machine usage. Maintain proper logs for machine performance, servicing, and breakdown incidents. Participate in installation, alignment, and calibration of new equipment. Support improvements in mechanical systems for productivity and energy efficiency. Ensure workplace safety, especially during mechanical repairs or modifications. Qualifications & Skills: Diploma / B.Tech in Mechanical Engineering (Freshers with passion for machines may apply). Interest in machine maintenance, repair, and operations in an industrial setup. Basic knowledge of hydraulics, pneumatics, and mechanical systems. Willingness to learn and grow within a factory environment. Strong problem-solving attitude and ability to work hands-on with tools and machinery. Prior internship or experience in a production/maintenance role is an advantage. Working Conditions: Work is performed in a factory setting with exposure to noise, moving equipment, and machinery. Requires physical activity including standing, bending, and manual handling. Personal Protective Equipment (PPE) must be worn during operations and repair tasks. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Leave encashment Provident Fund Schedule: Day shift Work Location: In person

Kindly share your resume on sv17@svmanagemnt.com Responsibilities: Defining scope of work document in consultation with Sales & Project Manager Approval of design release plan, Conduct internal design reviews Resource allocation as per needs of design manager Manage project related technical risks Ensure availability of domain expertise within the working team Lead customer DAP's, Appraisals of design leaders Approval of supplier specifications prepared by design lead Approval of modifications requested by customer/site team Technical support to sales team during proposal stage Identify training needs for design team Manage project documentation (design budgets, design schedules) Internal & external feedback management, Maintain daily time-sheet (hour booking) Qualification & Skills: BE (Mechanical /Automobile) with 10 -12 years experience, with at least 3 years as Manager or above Spot weld & MIG weld gun selection, MIG welding parameters Material handling equipment selection, Process planning Layout, DFMEA, Autocad, Catia, Pneumatics, Hydraulics, Ergonomy study Cycle-time study & calculation, Customer interaction MS Projects, Project related technical presentations

Role & responsibilities PNEUMATIC & HYDRAULIC CIRCUITS TROUBLE SHOOTING EXPERT IN AUTOMBILE INDUSTRY -INJECTION & SPECIAL PURPOSE AUTOMATIC MACHINE S MAINTENANCE DOCUMENTATON SKILL= MTTR MTBF, PM, SPARE MANANGEMENT, 5 WHY MANAGEMENT, with good system knowledge Preferred candidate profile Sr. MECHANICAL ENGINEER DME / BE ME 6-10 Years Experience

Head of QA & QM | Leading Hydraulics & Automation Manufacturer – Ahmedabad Head of Department – Quality Assurance & Quality Management (QA/QM) to drive quality excellence at their Ahmedabad-based facility. Who Should Apply Experience: 10–15 years in QA/QM roles within engineering or manufacturing industries. Education: Diploma or Degree in Mechanical Engineering. Industry Exposure: Hydraulics, pneumatics, machine tools, automotive, steel, or heavy engineering. Location : Ahmedabad Role Overview Lead and manage QA/QM operations across production of hydraulic valves, power packs, manifolds, and custom mechanical systems. Oversee ISO 9001:2015 QMS implementation, internal/external audits, vendor quality assurance, SOPs, inspection protocols, CAPA, and compliance processes. Collaborate closely with design, production, and procurement teams to ensure quality is embedded at every stage. Must-Have Skills In-depth knowledge of hydraulic systems, machined components, and mechanical assemblies. Familiarity with APQP, PPAP, FMEA, MSA, SPC, and quality tools like 5 Why, Fishbone, and Pareto. Proficiency in using measurement instruments, tolerancing, calibration, and ERP/SAP systems.

Job description Role & responsibilities Able to design efficient transportation methods that ensure safe delivery of goods, tailored to the specific nature of the cargo. Possesses comprehensive knowledge of statutory permissions required for the movement of Modular Hydraulic Trailers, including MORTH, Toll, RTA, and border regulations, with proficiency in both Hindi and English. Experienced in handling all types of tender inquiries related to logistics budgets. Skilled in obtaining budgetary offers from transporters and freight forwarders for tender inquiries. Proficient in tender budgeting for both export and domestic freight, ensuring competitive pricing in the market. Capable of identifying enroute obstacles and associated costs during the budgeting process for tender inquiries. Able to float RFQs, gather freight offers, and compile counteroffers based on transporter capabilities to ensure safe execution of projects. Experienced in obtaining NFA approvals from management for freight expenses and releasing purchase orders with timely acknowledgments. Proficient in preparing monthly dispatch and vehicle placement plans in alignment with cargo readiness. Skilled in coordinating vehicle placements with the project execution team according to the planned schedule. Extensive knowledge of multimodal transportation methods, including road, rail, sea, and air shipments. Continuously monitors cargo readiness to ensure timely initiation of vehicle placement. Ensures safe transportation methods are implemented and deliveries are made in safe and sound condition. Monitors safe loading and proper lashing of cargo on vehicles, ensuring the vehicle crew follows best practices. Skilled in tracking and tracing shipments using GPS, providing real-time updates to superiors. Regularly monitors transit status through live tracking and communication with the crew to resolve any transit-related issues. Possesses a solid understanding of required dispatch documents such as tax invoices, delivery challans, e-way bills, and lorry receipts. Knowledgeable in export documentation, port operations, and various types of shipment methodologies. Expertise in selecting the appropriate Modular Hydraulic Trailers based on cargo nature and specifications. Well-versed in the capabilities and specifications of various transport vehicles and their optimal utilization. Skilled in analyzing transport routes, conducting feasibility studies, and identifying risks through detailed route surveys. Experienced in conducting end-to-end route surveys for ODC cargo, identifying critical points, and developing mitigation plans. Expertise in freight budgeting for tenders and route analysis, with a focus on identifying and mitigating enroute obstacles. Strong negotiation skills for finalizing contracts in alignment with company terms and conditions. Efficient in tracking and ensuring shipments meet delivery timelines. In-depth knowledge of best practices in export methodologies to optimize logistics costs. Experienced in working with logistics providers and freight forwarders to ensure smooth execution of shipments. Knowledgeable in transport-related regulations and compliance acts implemented in India. Capable of understanding transport drawings for lifting, loading, and packing lists for export shipments. Familiar with unloading procedures and associated activities. Skilled in setting and measuring KPIs for transporters and freight forwarders, implementing corrective actions to meet targets. Proficient in processing freight invoices and ensuring timely payment through coordination with the finance department.

Job Responsibilities Team Member Managing Test Parts, Vehicles Procurement & Logistics Planning, ordering, and arranging test parts. Coordinating with various agencies and vendors. Managing logistics for parts and vehicle movement. Supporting lab management systems and audit requirements (ISO 9001, 14001, 27001, 45001, etc.). Coordinating inventory for lab consumables, jigs, and fixtures. Competency Requirements Proficient in MS Office, especially Excel. Driving proficiency (including 4-wheeler driving). Basic technical knowledge of vehicle components. Understanding of CMVR regulations related to safety component testing: IS 15139, IS 15223, IS 15901, IS 15546. Familiar with lab management practices including: 5S, Kaizen, 3G, 3K, and usage of PPEs. Experience with IT systems such as: Gate pass generation, purchase order (PO) systems, invoicing, vendor registration. Soft Skills Strong team player with excellent coordination and networking skills. Good analytical and presentation abilities. Sound decision-making skills. Willingness and openness to continuous learning. Additional Expertise 4-wheel driving skills. Basic understanding of finance. Good computer and internet proficiency. Basic knowledge of hydraulic actuators, motors, and systems.

Job ID: 1410 Location: Fully On-Site, Gurgaon, Haryana, IN Job Family: Research and Development Job Type: Permanent Employment Type: Full Time About Us Innovation. Sustainability. Productivity. This is how we are Breaking New Ground in our mission to sustainably advance the noble work of farmers and builders everywhere. With a growing global population and increased demands on resources, our products are instrumental to feeding and sheltering the world. From developing products that run on alternative power to productivity-enhancing precision tech, we are delivering solutions that benefit people – and they are possible thanks to people like you. If the opportunity to build your skills as part of a collaborative, global team excites you, you’re in the right place. Grow a Career. Build a Future! Be part of this company at the forefront of agriculture and construction, that passionately innovates to drive customer efficiency and success. And we know innovation can’t happen without collaboration. So, everything we do at CNH Industrial is about reaching new heights as one team, always delivering for the good of our customers. Job Purpose Hydraulic Routing and integration engineer will be responsible for hydraulic integration, hose and tube routing design and development with the accurate vehicle master model environment and adhering to the hydraulic requirement standards to meet vehicle performance, cost quality and manufacturing requirements. Position is part of Hydraulic team at Gurugram and requires close collaboration with local/global peers, local and global leaders to deliver value output. Nature of work shall predominantly be focused on Hydraulic engineering across new product development, VA/VE, sustenance etc. Key Responsibilities The candidate will have responsibility for the following within a hydraulic team Receive and understand hydraulic schematic as inputs from unit team member and designing the schematics. Should have through knowledge to design/select required hose, pipe, adaptors, connectors etc. meeting system requirement. 3D layout designing with master model vehicle environment in Creo, TcAE and will follow all workflow, release and baseline processes. This will also include supporting the vehicle architecture team in packaging major hydraulic components (for example, valves, pumps, motors, etc…) as necessary. Design and maintain system/vehicle specific 3D layout using Creo Pro-Piping & Teamcenter, designing with the accurate vehicle master model environment and adhering to the hydraulic routing requirements standard. Analyze design requirements, identify modifications required to be made in hydraulic routing and piping design. After approval of the 3D design, drawings of 2D circuit, hose, piping etc. should be created according to the CNH drawing specifications All designs should be stored on a regularly bases in Team Center and all release steps should be used Co-ordinate with respective system engineers based on the need for design solutions. Work in a global team environment both within the hydraulic competency group and within the other company functions including but not limited to platform product engineering, purchasing, quality, product validation, prototype shop and manufacturing. Effective Team Player: A highly motivated team player that contributes to an atmosphere in which people work together, enthusiastically and effectively, in producing outstanding results. The ability to constructively reconcile differences in an open and positive manner while operating in a highly matrixed organization. Create design standards to drive standardization across platforms. Experience Required 6 years and above experience in agricultural/construction equipment design in hydraulics competency. Knowledge of standards is an advantage. SKillset Required Good Knowledge of hydraulic tubes, hydraulic hoses, hydraulic fittings and related manufacturing processes and selection of hoses, tubes and fittings. Knowledge of hydraulic system design and component selection is an advantage. Experience in CREO piping, solid modeling, sheet-metal design, with knowledge of manufacturing processes and GD&T. Knowledge of Teamcenter, TC Viz mock is an advantage. Familiarity with concept selection, DFA/M, FEA, FMEA, DOE and understands test procedures. Good Analytical and problem-solving skills. Preferred Qualifications BE/BTech/BS or ME/MTech/MS in Mechanical or Agricultural Engineering or equivalent What We Offer We offer dynamic career opportunities across an international landscape. As an equal opportunity employer, we are committed to delivering value for all our employees and fostering a culture of respect. At CNH, we understand that the best solutions come from the diverse experiences and skills of our people. Here, you will be empowered to grow your career, to follow your passion, and help build a better future. To support our employees, we offer regional comprehensive benefits, including: Flexible work arrangements Savings & Retirement benefits Tuition reimbursement Parental leave Adoption assistance Fertility & Family building support Employee Assistance Programs Charitable contribution matching and Volunteer Time Off

This position shall be based at Malda, West Bengal as a Service Engineer and will be responsible for Installation, Breakdown, Service Maintenance for Injection molding machine. Work You’ll Do To Provide End-to-end support to customers from Installation of Machines to breakdown calls, machine problems, Spare Support, Training for Machine Operating, Processing Problems, etc. Coordinate pre-installation requirements with customers Developing & Implementation of the Corrective / Preventive actions for any Machine & further ensuring the Global Action of All Machines. Responsible for troubleshooting and providing solutions to overcome the problem. Responsible for installation and servicing of all machines in the region. Providing support to customers for Mould Trials (In–house & on-site) for Machine Shipment. Responsible for Assembly of Machines & Machines operations at Customer Site Provide training to customers for the Machine Operating & Trouble Shooting of Machine Issue Submitting the Field return part to the factory for analysis as well as to recover the cost of warranty of the part. Releasing flash for parts failure. Ensure customer training and customer care visit. Generation of Spare Parts Business & Developing the Spare Parts recommendation Preparing & Submission of Service Report for each machine Maintaining Software Backup / Hydraulics Circuits & Bill of Material on Service Portal Team This role shall be part of the Kolkata regional service team. Basic Qualifications Completed full time Diploma/Degree in Mechanical / Electronics / Plastics / Mechatronics with 2-4 years experience in testing/maintenance/service of Injection molding machine. Who We Are Milacron is a global leader in the manufacture, distribution and service of highly engineered and customized systems within the $27 billion plastic technology and processing industry. We are the only global company with a full-line product portfolio that includes hot runner systems, injection molding, extrusion equipment. We maintain strong market positions across these products, as well as leading positions in process control systems, mold bases and components, maintenance, repair and operating (“MRO”) supplies for plastic processing equipment. Our strategy is to deliver highly customized equipment, components and service to our customers throughout the lifecycle of their plastic processing technology systems. EEO: The policy of Milacron is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. We are committed to being an Equal Employment Opportunity (EEO) Employer and offer opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@milacron.com. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

🔧 We're Hiring: PLC Automation Engineer – Jr. Officer 📍 Location: Nagpur 🏭 Department: Design & Development 🎓 Qualification: B.E. in Electronics / Electrical (Specialization in Mechatronics or Control Systems) 📅 Joining: Immediate 🌟 About the RoleWe’re looking for a skilled and hands-on PLC Automation Engineer to join our Design & Development team in Nagpur. The ideal candidate will have experience in PLC programming, HMI development, and electrical circuit design, and will be responsible for executing complete automation projects from development to commissioning. If you're passionate about automation and ready to grow your career in a dynamic engineering environment, we’d love to connect with you. 🛠️ Key Responsibilities✔ Develop, test, and maintain PLC-based automation systems ✔ Design and program HMI interfaces for industrial applications ✔ Execute projects involving sensors, VFDs, servo drives, hydraulics, and pneumatics ✔ Coordinate Factory and Site Acceptance Tests (FAT/SAT) with customers ✔ Handle installation, commissioning, and post-deployment technical support ✔ Design and assemble electrical control and power circuits ✔ Perform root cause analysis and suggest improvements ✔ Collaborate with vendors for equipment sourcing and evaluation 👤 Candidate ProfileExperience: 2+ years in PLC/automation project execution 🔧 Technical Skills PLC Programming (Siemens, Allen Bradley, Schneider) HMI Design & SCADA familiarity Communication protocols: CAN Bus, Profibus, Profinet, Modbus Pneumatic & Hydraulic system handling Electrical wiring, panel design & control schematics Hands-on troubleshooting & project delivery 🎁 What We Offer💰 Competitive CTC Based On Experience 📈 Growth-oriented technical role with end-to-end project ownership 🔧 Exposure to live industrial automation projects 📚 Learning and upskilling support

Job Details Description Job Title: Technician (Hydraulics) Function Field Services Job Holder Location: Taloja, Navi Mumbai Level M5 Reports To Manager- Service Reportees Position Summary: The Technician– Services (Hydraulics) ensures that all the customer concerns & service jobs are addressed in time. The person will be responsible for executing the service jobs from hydraulics side for executing service projects (Offshore & Onshore both). Key Responsibilities Trouble shooting in various Hydraulic Equipment’s in offshore and onshore as well Overhauling, maintenance of various Hydraulic Equipment’s Periodically routine job in according to OEM recommendation Repair and maintains Hydraulic Equipment’s ensuring smooth flow of operations. Diagnoses trouble disassembles Hydraulic Equipment’s and examines parts for defects and excessive wear. Reconditioning and replacing parts such as hydraulic valves, hoses, filters, etc. Preparing DPR’s Adherence to all safety and quality procedure laid down by the organization. Profile Person Specifications: A person who has good experience of handling services from the Hydraulics side. He should have experience in working of hydraulics areas. Must have Qualifications ITI /Diploma/Mechanical Experience Should have min 5 to 6 years exp if ITI and 2 to 4 years’ experience if Diploma in crane Manufacturing or Heavy Engineering Should have working knowledge of Hydraulic equipment’s Competencies:- Functional Behavioral Customer service Documentation procedures on Quality API Q1- 9th edition API-RP-2C & 2D Crane Inspection Hydraulics Awareness of Crane Electricals Crane Operating Offshore Safety Preparing DPR’s Knowledge about Computers Winch repairing Gear Box Knowledge of Crane Assembly. Basic Communication skills Ability to learn English

Position Summary This positions shall be based at Bawal ( Rewari) as a Service Engineer and will be responsible for Installation, Breakdown, Service Maintenance for Injection molding machine. Work You’ll Do To Provide End-to-end support to customers from Installation of Machines to breakdown calls, machine problems, Spare Support, Training for Machine Operating, Processing Problems, etc. Coordinate pre-installation requirements with customers Developing & Implementation of the Corrective / Preventive actions for any Machine & further ensuring the Global Action of All Machines. Responsible for troubleshooting and providing solutions to overcome the problem. Responsible for installation and servicing of all machines in the region. Providing support to customers for Mould Trials (In–house & on-site) for Machine Shipment. Responsible for Assembly of Machines & Machines operations at Customer Site Provide training to customers for the Machine Operating & Trouble Shooting of Machine Issue Submitting the Field return part to the factory for analysis as well as to recover the cost of warranty of the part. Releasing flash for parts failure. Ensure customer training and customer care visit. Generation of Spare Parts Business & Developing the Spare Parts recommendation Preparing & Submission of Service Report for each machine Maintaining Software Backup / Hydraulics Circuits & Bill of Material on Service Portal Team This role shall be part of the Delhi regional service team. Basic Qualifications Completed full time Diploma/Degree in Mechanical / Electronics / Plastics / Mechatronics with 2-6 years experience in testing/maintenance/service of Injection molding machine. Who We Are Milacron is a global leader in the manufacture, distribution and service of highly engineered and customized systems within the $27 billion plastic technology and processing industry. We are the only global company with a full-line product portfolio that includes hot runner systems, injection molding, extrusion equipment. We maintain strong market positions across these products, as well as leading positions in process control systems, mold bases and components, maintenance, repair and operating (“MRO”) supplies for plastic processing equipment. Our strategy is to deliver highly customized equipment, components and service to our customers throughout the lifecycle of their plastic processing technology systems. EEO: The policy of Milacron is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. We are committed to being an Equal Employment Opportunity (EEO) Employer and offer opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@milacron.com. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

About Us: Barry-Wehmiller is a diversified global supplier of engineering consulting and manufacturing technology for the packaging, corrugating, sheeting and paper-converting industries. By blending people-centric leadership with disciplined operational strategies and purpose-driven growth, Barry-Wehmiller has become a $3 billion organization with nearly 12,000 team members united by a common belief: to use the power of business to build a better world. Job Description: About Barry Wehmiller: - Barry Wehmiller Companies is a global supplier of manufacturing technology and services based in St. Louis Missouri. Although it was founded in 1885 as a maker of machinery for the brewing industry, since 1987 Barry-Wehmiller has acquired more than 80 companies that provide equipment and services for a variety of industries: packaging, paper converting, sheeting, corrugating, engineering, and IT consulting. In 2016 it was ranked no. 10 on the St. Louis Business Journal's list of the city's Top 150 Privately Held Companies. We believe our culture differentiates us from other firms. In India, Barry-Wehmiller operates as a hub of innovation and collaboration, housing our Global Competency Center (GCC) and other strategic functions. The GCC, based in Chennai, is an Engineering Center of Excellence that supports all Barry-Wehmiller divisions globally. The center focuses on areas such as design and development in mechanical, electrical, and controls engineering, software development, and additive manufacturing. We believe in: Ownership – You’ll drive features end-to-end, from design to deployment. Flexibility – A friendly, results-oriented culture that respects your time. Empowerment – Your insights are valued, and your work makes a visible difference. Learning & Growth – You’ll work on complex challenges with smart, passionate peers—and have the support to level up continually. If you’re ready to bring your best thinking to the table and grow in a high-impact, future-focused environment, we’d love to hear from you. Job description: Mid-level Mechanical Design Engineer with a minimum of 6+ years of work experience in machine design to support design projects. Experience in Industrial Equipment and Machineries such as Paper / Printing machinery and discrete product machineries is required. Essential duties and responsibilities: Performs, plans, and/or schedules detailed phases of the Engineering work in a portion of a major project or in a total project of moderate scope. Performs work that involves conventional Engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Creates project estimates, product specifications, floor plans, and designs (including options) that meet customer-specific requirements. Develops Engineering models and/or drawings (using company standards and tools) including Bills of Materials (BOMs). Ensures that documentation is clear, complete, accurate and compliant with appropriate company standards. Participates in multi-discipline teams addressing specific design or process issues. Performs continuous improvement/cost reductions on machines and options. Performs risk assessments for specific machines and/or options. Creates documentation needed to approve the quality of machinery/options. Proposes and implements tools/processes to improve overall company efficiency. Participates in R&D projects (under guidance of senior-level Engineers). Participates in sales meetings to describe product-related issues and ongoing work. Participates in customer meetings to discuss specific machine layouts, specifications, etc. Manages costs, schedules, and performance on assigned projects. Trains Customer Service, Production Engineering and customer on machine setup, operation, and maintenance. Becomes familiar with all company safety standards. Performs all commitments/tasks in a timely and professional manner. Technical skills: Engineering basics: Engineering Mechanics, Strength of Materials, Statics, Geometric Dimensioning & Tolerance. Metals: Material properties and selection, Min. Max. of conventional and un-conventional Manufacturing process. Industry specific Experience: Discrete Machines / SPM / Machine Tool / Automation; Material Handling, Conveyor systems, Bulk Material handling. Should have worked on at least couple of engineering projects from start to finish (Scope, Specification, Idea, Concept Engineering and Cross-functional team experience. 3D CAD modelling and detailing engineering – should be able to create 3D modeling and associated 2D manufacturing drawings with GD&T. Experience in CAD data management using PDM / PLM software. Adherence to CAD standards – ISO, ANSI, experience in MBD will be an added advantage. Knowledgeable in selection of mechanical OEM parts (sprockets, belts, etc.). Exposure to machine building, installation and commissioning will be an added advantage. Mandatory Skills: Good understanding of mechanical functions and principles. Ability to follow a prescribed engineering process. 3D CAD software proficiency: SolidWorks (Must) (in combination with SmartTeam) / Creo (added advantage) / Inventor (added advantage). Familiar with AutoCad 2D. Familiarities with Electrical / Controls / Pneumatics and hydraulics basics. Ability to work as team MS Office applications (Outlook, Teams, Excel, Word, PowerPoint, etc.) Good in design calculations / basic FEA / selection of OEM parts. Conversant with Imperial and metric units. Education and Experience: Bachelor’s degree in Mechanical engineering. Minimum of six (6) years of experience. Experience in OEM’s preferable. Experience with machine Installation / Commissioning / Troubleshooting Travel: May need to travel up to10% each year based on requirements. Key Result Areas: Ability to study, understand existing machine function. Excellent CAD tool skills, experienced in using all the modules in Solidworks. Developing manufacturing drawings with GD&T following ISO/ANSI standards. Good documentation preparation and maintenance skills. Effort and Schedule adherence with error free deliverables, less of oversight for delivering results. Good problem-solving skills with technical issues in machine function. Plans and conducts work requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard techniques, procedures, and criteria. What is in for you? This role is more than just a job. It’s an opportunity to be part of a global team that values people excellence, innovative solutions, and operational excellence. Barry Wehmiller provides a unique environment where you can grow your skills, work on impactful projects, and collaborate with some of the brightest minds in the industry. In addition, we are deeply committed to your personal and professional growth, fostering a culture that helps you achieve your full potential. We offer a culture that values autonomy, ownership, and flexibility. You’ll have the freedom to experiment, influence product decisions, and see your work through—from idea to delivery. Our teams are collaborative, agile, and outcome driven, with trust placed in every individual to make a meaningful impact. To understand more about our people-first philosophy, you may like to watch this short video by our CEO, Mr. Bob Chapman , on Truly Human Leadership : Watch the video At Barry-Wehmiller we recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. We know that our differences often can bring about innovation, excellence and meaningful work—therefore, people from all backgrounds are encouraged to apply to our positions. Please let us know if you require reasonable accommodations during the interview process. Company: BW Corporate GCC

Education, Experience & Competencies required: Education: Graduate/Post Graduate in Emergency & Trauma Care Technology Experience: Freshers / 1+ Year of Experience Job Competence Job Knowledge, Job Skills, Quality and Safety Consciousness Commitment & Initiative Punctuality, Initiative & Learning, Adherence to work ethics, Dependability Interpersonal Relations Team work, Effective communication, Positive & Empathetic attitude, Presentability Specific Job Related Competencies Knowledge of emergency trauma technician procedures, Excellent Communication Skills, Patient and Empathy Roles and Responsibilities Department: Accident & Emergency Unit: KMC Hospital Ambedkar Circle Mangalore Position Reports to: Functional Head: In charge Critical Care Sub Functional Reporting to: In charge Accident & Emergency Dept. Administrative Head: Manager – Operations Profile of reportees: Direct : Nil Indirect : Nil Key Responsibilities: Determines the nature and extent of illness or injury present and establishes the priorities for emergency care & transport. Based on assessment findings, renders appropriate medical care to patients of all ages, while remaining in the scope of SOP. Duties include: Initial assessment and support treatment for life threatening conditions Obtaining a history and vital signs Performing a detailed or focused assessment Performing CPR Controlling haemorrhage Protecting patient from environment Opening and maintaining a clear airway Ventilating patients Bandaging and dressing wounds Immobilizing fractures Managing respiratory, cardiac, diabetic, allergic, behavioural and environmental emergencies Treating suspected poisonings Administering oxygen Responds to emergency calls to provide efficient and immediate care to the critically ill and injured, and transports the patient to the hospital Safely transfers patients to ambulance, or the concerned mode of transport. Performs triaging of patients and management of mass casualty situations Lifts patients, backboards and stretches in a safe manner using proper body mechanics Reports to the CMO/ Incoming consultant at the emergency department on the patient’s condition and intervention performed, nature and extent o the injuries, the number of patients, vital signs and treatment rendered Maintains control over the scene by reassuring patients and bystanders, working with confidence and efficiency, and avoiding undue haste and mishandling Proper management and maintenance of emergency supplies and equipment Attends continuing medical education sessions in order to maintain proficiency as required by local protocols and the state Any other work assigned by the in charge