Total Number of Openings 1 About the position: The Marine Terminal Engineer is part of the Subsea, Civil, and Marine engineering team within the Chevron ENGINE Center i and provides technical services and technology development support to both the base business and capital projects. The position requires the engineer to assess and define technical requirements of floating offshore production systems, marine offloading facilities, and fixed and floating marine terminals, F(P)SO s, and FSRU s in shallow to deepwater depth applications. The engineer is a technical specialist in the areas of Naval Architecture, Ocean, and Coastal Engineering for near shore and offshore. Key Responsibilities: Plan, assess, and design of near shore and offshore marine terminal loading systems, terminal operations, vessel motions, berthing, mooring and downtime analyses of tankers and carriers, breakwaters and groins, navigation channels, sediment transport, and coastal processes Manage design, fabrication, and installation of key components of offshore loading buoys including Single Point Moorings, Conventional Buoy Moorings, and lightering systems Evaluate the performance and condition of key terminal components, mooring and offloading systems and equipment to determine remaining and extended life Assess F(P)SO turret and mooring systems to support the mooring and berthing of oil and chemical tankers and gas carriers Support assignments using knowledge and experience in ocean/coastal engineering, for the design, fabrication, and installation of shallow water and deepwater offshore facilities Ability to assist and respond quickly to project needs. Ability to develop and maintain good relationships with project teams Utilize project management skills to plan and manage contractors and consulting support to projects Exhibit open, honest, and effective communications in all directions, good interpersonal skills, team engagement and ability to influence across organizations Required Qualifications: MS in Civil, Ocean or Coastal Engineering from a deemed/recognized university Direct engineering experience for proposed and existing marine terminals for oil and gas production including concept development, pre-FEED, FEED and detailed design for construction, installation, commissioning, and operation for a variety of projects. Expertise with integrity management of marine terminals Analytical strengths in finite element analysis, shallow water and deepwater hydrodynamics, and nonlinear behavior. Analysis software experience with Python, MATLAB, C++, Julia, AutoCAD, Rhino, ICEM CFD, Solidworks, Star CCM+, Orcaflex, WAMIT, Abaqus, aNyMOOR TermSim, MIKE21, and NEMOH Preferred Qualifications: A minimum of 15 years of oil and gas industry experience related to marine terminals and shallow water and deepwater hydrodynamics Solid foundation and advanced skills in naval architecture or ocean/coastal engineering with strengths in hydrodynamics, nonlinear dynamics, vessel and hull motions, mooring analysis, ship to shore interfaces. Hands-on experience with design practices, analysis methods and tools. Working knowledge of industry guidelines, recommendations, practices and standards Technical leadership to support project teams and collaborate across multidisciplinary functions to design, execute, and evaluate projects to minimize risk and achieve objectives Ability to develop and maintain accurate, complete, and current standards and guidelines Demonstrate the ability to develop new and maintain existing stakeholder relationships Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1.30pm to 10.30pm. Chevron participates in E-Verify in certain locations as required by law.

Total Number of Openings 1 About the position: The Mechanical Engineer is part of the Materials, Equipment, and Quality team within Chevron s ENGINE Center and is responsible for providing expertise in areas in the mechanical design, thermal design, and fluid flow of multiple types of unfired heat transfer equipment. This role supports the design, fabrication, and troubleshooting of various types of heat exchangers: Shell & tube, air coolers, brazed aluminum, etc. Key responsibilities: Thermal-hydraulic design calculations and analysis of new and existing heat exchangers using HTRI to evaluate performance. Review mechanical design of new heat exchangers Review heat exchanger mechanical design of existing heat exchangers to troubleshoot performance or leakage issues and propose solutions Perform heat exchanger monitoring and analysis to identify performance issues and propose solutions Review vendor design packages for new heat exchangers Required Qualifications: Bachelor s degree in mechanical or chemical engineering from a recognized (AICTE) university Proven experience with design, fabrication, and troubleshooting of various types of heat exchangers: Shell & tube, air coolers, brazed aluminum, etc. Application of ASME BPVC, API 660, API 661, TEMA Skilled in the use of HTRI software Preferred Qualifications: 10+ years of experience in the mechanical and thermal design of heat exchangers Advanced degree in mechanical or chemical engineering (Masters or Doctorate) with focus on heat transfer Oil & gas or petrochemical experience, or experience working with a heat exchanger fabricator Experience with PRO II, HSYSY, INSPECT, or PV Elite software Chevron ENGINE supports global operations, supporting business requirements across the world. Accordingly, the work hours for employees will be aligned to support business requirements. The standard work week will be Monday to Friday. Working hours are 8:00am to 5:00pm or 1:30pm to 10:30pm. Chevron participates in E-Verify in certain locations as required by law.

Job Description Job Overview: The Senior Principal Process Engineer is tasked with solving unique and complex problems that have a broad impact on the business. They must proactively identify and solve the most complex problems that impact the management and direction of the business. The Senior Principal Process Engineer is considered a specialist in the field of Process and they offer a broad base of knowledge about the Engineering function. The Senior Principal Process Engineer impacts the direction and resource allocation of programs and projects in their discipline and works within general functional policies and industry guidelines. The Senior Principal Process Engineer role requires conceptual and innovative thinking to develop creative solutions to Process challenges. Responsibilities Key Tasks and Responsibilities: Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards Develop creative and innovative solutions that are reliable and cost-effective for problems and challenges when they arise Apply expertise to the most complex problems Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements Develop and manage plans to achieve business objectives Communicate and explain highly complex ideas and anticipate potential objections, influencing outcomes When acting as Lead Engineer, in addition: Direct large Engineering team as a Lead Engineer on most unique and complex projects Lead the Discipline engineering design of the assigned work area and completed it within the planned schedule and budget, by standards, MDR, and project-specific procedures and to a high professional standard Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all workforce resources - agree on allocations with the Discipline Manager Ensure interfaces and deliverables are identified Maintain responsibility for progress and productivity, identifying any required corrective action Act as project representative for Discipline during meetings with the Project Team, Customer discipline lead, and relevant agencies such as certifying authorities, auditors, third parties, etc. Become fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues Interpret contractual requirements as they relate to engineering execution Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders Interface with all disciplines to develop clash-free designs Interface with other departments to obtain input for Discipline designs and drawings Maintain close coordination with other engineering disciplines, Planning, and Project Management Teams, as required Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to the Discipline Lead Engineer and Discipline Manager Prepare estimates for bid proposals, including technical query reviews, execution statements, and work-hour estimates, identifying software requirements and any other project-specific requirements Prepare bids and project's Discipline engineering budget and execution plans, updating as required Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements Prepare, review and (as Lead Engineer) approve Discipline engineering design basis, philosophies, and technical specifications Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity Review project schedule and fabrication schedule about construction sequence, milestones, and engineering scope Attend project kickoff and review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required Provide technical direction and review of Designers producing products related to Process Engineering Prepare, review, and (as Lead Engineer) approve design reports and procedures Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables Review and (as Lead Engineer) approve vendor and subcontractor submittals, checking for compliance with project specifications and providing comments as necessary Present issues and problems to Customers promptly and assist the Lead Engineer in negotiating resolution by project and company requirements Provide leadership, mentoring, and guidance to other Engineers Supervise and guide assigned engineers and coordinate with project Lead Designers for Discipline engineering and design deliverables Monitor costs of own work processes Evaluate costs associated with products and solutions Assign personnel to analyze and design tasks based on knowledge of individual strengths and capabilities Responsible for checking the following key deliverables, applicable as per the Project scope: Process simulations / Heat and material balance Process flow diagrams (PFD) Piping and instrument diagrams (P&ID) Process safeguarding diagram Equipment and instrument process datasheets Process specifications Operating philosophy and startup and operating manuals Equipment list (process data) Line list (process data) Equipment and line sizing calculations Flare radiation and dispersion calculations Depressurization and flare network studies Process studies Provide process assistance to other disciplines by performing IDC / providing inputs as required for the following activities: Layout review Area classification drawings Safety studies Electrical load list Equipment datasheets Instrument datasheets ESD and F&G logic diagrams and control narratives Participate in HAZAN, HAZID, HAZOP, and other safety/operability/reliability studies and workshops Assist in closing out HAZOP action items Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews When acting as Lead Engineer, in addition: Act as project-based Discipline point of contact in communications and meetings with Customer counterparts Ensure substantive communications are documented Identify project staff needs based on knowledge of individual engineers' skill sets and provide requests to the Discipline manager Plan, organize, and assign tasks, responsibilities, and work-hours budgets to the discipline team and verify tasks are completed within budgets Plan Discipline Level 4 detail deliverable schedule/register compliant with the overall execution plan Prepare working forecasts identifying change management plans, corrective action, and real-time schedule Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity Alert the project team of any deviation from the scope or a need for a change order Monitor KPI measurement results and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others Coordinate with other Discipline Lead Engineers and Designers to ensure timely receipt of necessary design inputs Review and approve requisitions, technical quotation evaluations, and queries, compiled bid tabulations and recommendations, and purchase requisitions; and coordinate with Procurement to expedite vendor documents as required Review comments from Customers & other agencies on documents and drawings produced by the team and resolve and give guidance on their update and incorporation Assist the Discipline manager in the preparation of quarterly forecasts and workforce planning Anticipate project engineering needs and plan accordingly Coordinate with vendor for discipline-managed/procured items Assist the Discipline manager and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members Reports to: Project: Project Engineering Manager or Project Manager, Functional: Supervising Department Manager Liaise with: All Engineering disciplines, Fabrication Group, Safety Department, Project Management Team, Document Control, Project Planner, Project Cost Controller, QC, Certification Group, Procurement Group, Subcontractors, Vendors, and Customers Supervises: Senior Engineers and Engineers Qualifications Essential Qualifications and Education: Bachelor’s Degree or Master’s degree in Engineering 20+ years of experience in oil and gas with major contractors or consultants predominantly performing detail design Preferably Registered Professional Engineer or member of professional engineering society as applicable Recognized as having good communication and presentation skills (e.g., published technical papers are written, actively participates in conferences and/or seminars, and/or is a capable presenter of design solutions or topics at lunch and learns; etc.) Detailed knowledge of design techniques and analysis methods and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable to offshore Knowledgeable in project coordination and execution skills Recognized across the company as a key leader, highly innovative designer, or highly skilled analyst About Us Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably. For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries. Show more Show less

Education and Knowledge BE/ B.Tech / Diploma (Mechanical Engineering) Job Overview TE Connectivity s R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise includematerials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. Responsibilities Strong ability to work on - Pro-E / Creo, Windchill, PLM/PDM. To handle customer complaints with respect to design issues Good working knowledge on GD&T & Tolerance Stack up analysis. Perform Value Engineering (VA/VE) analysis. Exposure to VAVE projects with idea generation, cost saving calculations, validations, approval, and implementation. Understand / Create Test Specification for DV/PV testing for products. Exposure to DVP&R preparation, signoff from Customers and product testing. Knowledge on Product / Component Designing. Knowledge on designing the product with all aspect from concept to design, release for production & sustenance engineering. Understanding on technical requirements & specifications for the products. Hands on experience in generating multiple design concepts and feasibility check Ability to create/modify, check and release product designs and drawings (3D & 2D). Experience on creation of engineering BOM. Exposure to DFMEA, FEA analysis, prototyping, validation. Knowledge on Plastic Injection Molding process, insert molding, molding defects. Knowledge on Sheet Metal stamping processes. Knowledge on Tool Design aspects such as Under cuts etc. Knowledge on Product aspects like parting line, drafts, thickness etc. Exposure to APQP & PPAP documents and activities. Exposure to system Audits such a IATF / TS 16949 requirements for automotive industry. Ability to drive and implement 4M change. Ability to drive ECR/ECN/PCN with all CFT members and customers for flawless implementation for all changes. Ability to work along with multiple functions such as sales, marketing, tool design, production, manufacturing, sourcing, quality, test lab etc. and customers. Competencies ABOUT TE CONNECTIVITY TE Connectivity plc (NYSETEL) is a global industrial technology leader creating a safer, sustainable, productive, and connected future. Our broad range of connectivity and sensor solutions enable the distribution of power, signal and data to advance next-generation transportation, energy networks, automated factories, data centers, medical technology and more. With more than 85,000 employees, including 9,000 engineers, working alongside customers in approximately 130 countries, TE ensures that EVERY CONNECTION COUNTS. Learn more at www.te.com and on LinkedIn , Facebook , WeChat, Instagram and X (formerly Twitter). WHAT TE CONNECTIVITY OFFERS: We are pleased to offer you an exciting total package that can also be flexibly adapted to changing life situations - the well-being of our employees is our top priority! Competitive Salary Package Performance-Based Bonus Plans Health and Wellness Incentives Employee Stock Purchase Program Community Outreach Programs / Charity Events IMPORTANT NOTICE REGARDING RECRUITMENT FRAUD TE Connectivity has become aware of fraudulent recruitment activities being conducted by individuals or organizations falsely claiming to represent TE Connectivity. Please be advised that TE Connectivity never requests payment or fees from job applicants at any stage of the recruitment process. All legitimate job openings are posted exclusively on our official careers website at te.com/careers, and all email communications from our recruitment team will come only from actual email addresses ending in @te.com . If you receive any suspicious communications, we strongly advise you not to engage or provide any personal information, and to report the incident to your local authorities. Across our global sites and business units, we put together packages of benefits that are either supported by TE itself or provided by external service providers. In principle, the benefits offered can vary from site to site. Location

Company Description NRS AS is a Norwegian company with over 40+ years of experience in advanced construction equipment for concrete bridges. The company delivers cutting-edge technology and design solutions worldwide at competitive costs. NRS AS equipment, like Formtravellers and Launching Girders, are known for their effectiveness and efficiency in bridge construction projects globally. Role Description This is a full-time on-site role for a QA QC Fabrication Engineer at NRS AS in Chakan. The QA QC Fabrication Engineer will be responsible for quality control, quality assurance, quality auditing, quality management, and inspection tasks related to specialized construction equipment, ensuring compliance with engineering standards and project requirements. Qualifications Quality Control and Inspection skills Quality Assurance and Quality Auditing experience Quality Management knowledge Attention to detail and precision in work Strong analytical and problem-solving skills Relevant certification in quality control or engineering Experience in construction or fabrication industry is a plus Bachelor's degree in Engineering or related field Show more Show less

We’re Hiring – Quality Engineer (Welding & Fabrication – TPI) Location: Ahmedabad / Vadodara / Surat, Gujarat Industry: Water & Wastewater Treatment | Environmental Engineering | Manufacturing Are you experienced in quality control, welding, and fabrication inspection? We are looking for a skilled Quality Engineer to join our growing team focused on delivering high-performance solutions in the water and environmental sector. Key Responsibilities Inspect welded structures, piping, and fabricated items as per WPS/PQR standards Coordinate with Third Party Inspection (TPI) agencies and manage documentation Prepare and review Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR) Ensure compliance with industry codes and standards (ASME, IS, API, etc.) Oversee QA/QC processes in manufacturing and project execution Support non-destructive testing (NDT) and report quality deviations Collaborate with internal teams to ensure consistent product quality Requirements Diploma or B.E./B.Tech in Mechanical, Metallurgy, or related field 2 to 6 years of experience in QA/QC in welding, fabrication, or manufacturing Sound knowledge of welding techniques, WPS, PQR, TPI, and NDT Familiarity with ISO standards and QMS documentation Experience in water or wastewater treatment equipment manufacturing is preferred Why Join Us Work with a company contributing to critical water and environmental projects Exposure to fabrication, EPC, and manufacturing environments Strong technical team and growth-focused culture How to Apply To apply, share your resume at archita@dreamhrconsulting.com or message us directly on LinkedIn. Please mention your location and relevant QA/QC experience. Show more Show less

ALL QUALITY RELATED DOCUMENTATION AND COMPLIANCE

SUMMARY Welder We are seeking a dedicated welder to contribute to the achievement of our company's objectives by maintaining machines that manufacture and repair metal structures, tools, and equipment. The ideal candidate will complete all welding and gas cutting tasks within specified timeframes while strictly adhering to safety procedures. In addition to welding responsibilities, the welder will be expected to perform fitting tasks assigned by the Maintenance Supervisor, maintain a clean and organized work area, and ensure compliance with safety regulations. Embracing the company's vision and actively working on waste reduction are also key aspects of this role. Key Responsibilities: Complete welding and gas cutting tasks within specified timeframes while adhering to safety procedures Perform fitting tasks assigned by the Maintenance Supervisor Maintain a clean and organized work area to hygiene standards Weld materials using correct techniques and specialized machinery Assess welded surfaces, structures, and components to identify errors Enforce strict safety regulations and monitor machinery usage and temperature Weld components in various positions and embrace the company's vision Actively work on waste reduction and comply with company policies and procedures Support and promote the highest standards of hygiene at our company's Group Salary Range: Rs 40,000 to Rs 55,000 Key Technical Skills & Knowledge: Knowledge of various welding techniques, including TIG, MIG, arc, and oxy-fuel welding Knowledge of manual and mechanical welding techniques Ability to carry out jobs independently Education/Qualification: Any degree/diploma Experience: A minimum of 5 years of experience as a welder Salary - 50 - 55k Requirements Requirements: Proven experience as a welder Knowledge of various welding techniques Ability to work independently Strong commitment to safety and hygiene standards Benefits 3 years Contract, if performance good renewed for another 3 years. In-case contract is renewed, then wages will be increased for a period of another 3 years. Will be given 1 Round Trip Air Fare (India-Fiji-India) free of cost every 3 years. Will get free accommodation in Fiji & free travel to work while fooding cost will be borne by the candidate which is approx. Rs 5,000 per month. Annual Leaves: Sick Leave will be 10 days, Annual Leave will be 10 days per year along with Gazetted Holidays listed by the Govt of Fiji.

Dear Candidate, We`re looking for a highly skilled Design Engineer with strong expertise in Cab Structure & Trims Design for Construction Equipment or Automotive (BIW & Trims). Plastics experience should be must. Key Responsibilities: Concept design & development of Cab systems/components. Creation of CAD Layouts, BOM, and Production Drawings. Engineering Documentation, Change Notices & PLM release. Coordination with cross-functional teams, vendors & suppliers. Support current product PCM, VA-VE, service issues & prototype builds. Participation in regulatory compliance & ergonomic/NVH/HVAC evaluations. Required Skills & Experience: Hands-on with Cab design for CE machines like Loaders, Backhoe, Excavators or Tractors Strong in Sheet Metal & Plastic component design Knowledge of DFM/DFA, GD&T, DFMEA, Tolerance Stack-up & Space Claim Proficiency in CAD tools (UG NX preferred) Understanding of manufacturing processes (fabrication, plastics, assembly) Familiar with DVPSOR documentation and compliance requirements Excellent communication & coordination skills Interested candidate revert me at swati.shikha@mounttalent.com or call 9560495550

Job Title: Engine Design Engineer Responsibilities Design and model engine components and systems. Ensure functionality at the system level for engine designs. Collaborate on manufacturing processes including plastic molding, casting, fabrication, piping, and metal machining. Utilize NX software for modeling and drafting. Apply Geometric Dimensioning and Tolerancing (GD&T) in design applications. Essential Skills Minimum 2 years of experience in engine component and system design and modeling. Proficient knowledge of engine system functionality. Experience with manufacturing processes like plastic molding, casting, fabrication, piping, and metal machining. Proficiency in using NX software for modeling and drafting. About Actalent Actalent is a global leader in engineering and sciences services. For more than 40 years, we’ve helped visionary companies advance their goals. Headquartered in the United States, our teams span 150 offices across North America, EMEA, and APAC—with four delivery centers in India led by 1,000+ extraordinary employees who connect their passion with purpose every day. Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com. Show more Show less

Should be cost estimations for Part and tooling including dies, Fixtures for Sheetmetal and Fabrication components for new developments and design changes. Part cost Estimations to be done at different stages of the project- Concept / Model based, Drawing based. Identify areas of cost reduction through design iteration to achieve the cost optimization at design stage itself. Study New existing manufacturing processes at supplier end to prepare Costing guidelines std estimation Templates. Qualifications B. Tech

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer – Piping / Mechanical(Packages) for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of Piping, static & rotary equipment in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power plant, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer-Mechanical (Packages) on mining projects. In-depth knowledge of piping design codes and standards, such as ASME B31.3, ASME B31.4, and ASME B31.8. Knowledge of process engineering principles and equipment specifications. Understanding of fabrication and construction techniques for piping systems. Knowledge of international codes and standards, mainly ASME VIII div. 1/2, API and TEMA. Design and develop piping systems and components for various, Review detailed piping layout drawings, including isometrics and bill of materials. Collaborate with the project team to ensure compliance with project specifications and industry standards. Engineering & design experience in rotary machinery to provide expert guidance in the selection, specification of rotating equipment like pumps, compressors, and blowers. Responsibilities include reviewing design specifications, vendor management, technical evaluations, and ensuring compliance with industry standards. The ideal candidate will have in-depth knowledge of API standards and rotating equipment lifecycle. Engineering & design experience in Pressure vessels, heat exchangers, tanks, pumps, compressors, blowers, piping system, pipe supports, pipe support structures. steel & RC structures, preparation / review of detailed. Preparation of Pipe wall thickness calculations including external pressure calculation, branch chart calculations and line blanks. Development of project standards, technical specifications for piping materials with minimum supervision. Preparation of Valve Material Specifications, Preparation of datasheets for all piping special items like special valves, strainers, traps, sight glass, bellows, hoses, etc. Preparation of RFQs for piping bulk items, valves, specialty items, etc Carrying out technical evaluation of vendor offers against RFQs for all piping material; preparation of both technical evaluation and commercial comparison; Preparation of technical bid study reports for static, rotary, valves, piping specialties, etc. Assisting in all interfacing, engineering, and construction groups in the area of piping material. Able to resolve all piping material related bottlenecks in project. Extraction and handling Piping MTO for the project. Develop inspection and testing plans (ITPs) for tanks and vessels, including hydrostatic and non-destructive testing (NDT). Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Ensuring that quality procedures are implemented and maintained. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company’s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams’ performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing experience of Chutes, Bins, Hoppers, and conveyor components. E.g. trusses Ability to work in a fast-paced environment with strict deadlines. Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in piping, static, rotary equipment engineering. Minimum of a bachelor’s degree & preferred master’s degree in mechanical engineering. PG diploma or certificate in Piping engineering would be an asset. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage. Show more Show less

Role & responsibilities Knowledge of Welding and fabrication shop Knowledge of PQCDSM data analysis & action plan for Gap. Knowledge of 5S, TPM, Kaizen. Knowledge of SAP T Code Knowledge of safety measures and procedures Knowledge of IATF 16949 Documentations Knowledge of MIG/TIG/Seam/ Projection/Spot welding processes. Knowledge of Labor deployment monitoring & control Cost consciousness & monitoring Knowledge of budgeting and cost control

Role & responsibilities Knowledge of Welding and fabrication shop Knowledge of PQCDSM data analysis & action plan for Gap. Knowledge of 5S, TPM, Kaizen. Knowledge of SAP T Code Knowledge of safety measures and procedures Knowledge of IATF 16949 Documentations Knowledge of MIG/TIG/Seam/ Projection/Spot welding processes. Knowledge of Labor deployment monitoring & control Cost consciousness & monitoring Knowledge of budgeting and cost control

Job Title: Design Engineer Job Description We are seeking a talented Design Engineer with a background in mechanical engineering and 4-6 years of experience, preferably within the manufacturing industry. The ideal candidate will have a strong working knowledge of SolidWorks CAD tools and expertise in plastic, sheet metal, and fabrication part modeling, drafting, and assembly. This role involves mechanical design, new product development, and plastic design. Responsibilities Design and develop new products and improve existing ones using SolidWorks CAD tools. Model, draft, and assemble parts for plastic, sheet metal, and fabrication projects. Manage product life-cycle including consumer, industrial, and storage equipment. Collaborate with teams to ensure designs meet manufacturing and cost requirements. Utilize expertise in injection molding for plastic product design. Create detailed 3D models, assemblies, and 2D drawings using SolidWorks. Ensure proper tolerances and manufacturing methods for cost-effective solutions. Essential Skills Bachelor's degree in Mechanical Engineering or related field. 4-6 years of experience in mechanical design within the manufacturing industry. Proficiency in SolidWorks CAD tools. Expertise in plastic and sheet metal part design. Strong understanding of plastic product design for injection molding. Ability to work on sheet metal covers/enclosures and electro-mechanical enclosures. Additional Skills & Qualifications Experience in product design and life-cycle management. Ability to provide innovative solutions for consumer and industrial products. Work Environment The work environment is dynamic and collaborative, utilizing advanced CAD technologies such as SolidWorks. The role involves standard working hours and may require occasional overtime to meet project deadlines. Dress code is business casual, with the emphasis on maintaining professionalism while ensuring comfort during design tasks. About Actalent Actalent is a global leader in engineering and sciences services. For more than 40 years, we’ve helped visionary companies advance their goals. Headquartered in the United States, our teams span 150 offices across North America, EMEA, and APAC—with four delivery centers in India led by 1,000+ extraordinary employees who connect their passion with purpose every day. Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com. Show more Show less

What We Offer At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied responsibilities as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are. Group Summary Transforming mobility. Making automotive technology that is smarter, cleaner, safer and lighter. That’s what we’re passionate about at Magna Powertrain, and we do it by creating world-class powertrain systems. We are a premier supplier for the global automotive industry with full capabilities in design, development, testing and manufacturing of complex powertrain systems. Our name stands for quality, environmental consciousness, and safety. Innovation is what drives us and we drive innovation. Dream big and create the future of mobility at Magna Powertrain. Job Responsibilities Job title: PCB Layout Design Engineer Job Introduction We are seeking a highly skilled PCB Layout Design Engineer with 5+ years of experience and expertise in designing Power Electronics PCBs with Altium Designer EDA tool. As a PCB Design Engineer, you will be responsible for designing and developing printed circuit boards for automotive Traction Inverter, Power electronics & Mixed signal electronic systems. Major Responsibilities Develop, design, validate and optimize complex Power Electronics PCB layouts using Altium Designer, ensuring adherence to IPC standards and best practices. Perform PCB Library creation, schematic capture, component placement, routing and generate manufacturing files considering signal integrity, power integrity, and EMI/EMC requirements. Perform Design rules settings in Altium designer EDA tool following specified Clearance and Creepage standards and other DFM specifications. Create Altium Schematic and Footprint Libraries according to IPC standards and reliable to Manufacturer specifications and managing the database. Create and maintain accurate PCB design documentation, including design guidelines, Fabrication and Assembly Notes/drawings. Work closely with hardware engineers, Mechanical engineers, Manufacturing Engineers and software teams to create PCB that meeting required specifications. Conduct and participate in design reviews, offering insights and suggestions to enhance the functionality and manufacturability of designs. Estimate timeline and plan PCB layout workflow and ensure Layout completion within Projected timeline. Knowledge And Education Bachelor’s or master’s degree in electrical engineering or a related field. Work Experience 5+ years of experience Hands-on experience in PCB layout design for power electronics, Traction inverters and Converters and motor drives. Skills And Competencies Proficiency in Altium Design EDA tool is must. Ability to read electrical schematic and good understanding about hardware design lifecycle. Basic understanding of Signal Integrity, Power Integrity and EMI/EMC. Strong knowledge in DFM, DFM & DFT. Solid understanding of basic Electrical and Electronics principles. Strong problem-solving skills and ability to work independently or in a team. Experience in the automotive sector is desirable. Conscientious, precise and independent way of working. Very good written and spoken English skills. Awareness, Unity, Empowerment At Magna, we believe that a diverse workforce is critical to our success. That’s why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email or traditional mail to comply with GDPR requirements and your local Data Privacy Law. Worker Type Regular / Permanent Group Magna Powertrain Show more Show less

Job Title: Package & Machinery Inspection Engineer Company Name: Tecnimont Job Description As a Package & Machinery Inspection Engineer at Tecnimont, you will be responsible for overseeing the inspection and quality assurance of various packages and machinery throughout the project lifecycle. You will work closely with project teams to ensure compliance with technical specifications, industry standards, and safety regulations. Your role will include conducting inspections, preparing reports, and collaborating with vendors and subcontractors to resolve any issues that arise during the fabrication and assembly processes. Key Responsibilities Conduct inspections of machinery and packaged equipment to verify compliance with design specifications and quality standards. Review inspection and test plans to ensure they align with contractual and regulatory requirements. Collaborate with engineering, procurement, and construction teams to address any quality-related concerns. Prepare detailed inspection reports and documentation for review and approval. Monitor the performance of vendors and suppliers, performing audits as necessary. Participate in project meetings and provide updates on inspection activities and findings. Perform root cause analysis for non-conformities and track corrective actions. Ensure adherence to safety protocols and promote a culture of safety within the team. Skills And Tools Required Bachelor’s degree in Mechanical Engineering or a related field. Strong knowledge of quality assurance principles and inspection techniques. Familiarity with industry standards such as ASME, API, and ISO. Proficiency in using inspection tools and equipment, such as calipers, gauges, and ultrasonic testing devices. Excellent analytical and problem-solving skills. Strong communication skills, both verbal and written. Ability to work collaboratively in a multidisciplinary team environment. Proficiency in using software tools for documentation and reporting, such as Microsoft Office Suite and project management software. Certification in Quality Control or relevant inspection certifications (e.g., AWS, NACE, or similar) is a plus. This role is critical to the success of our projects and requires a detail-oriented individual who is committed to maintaining the highest quality standards. If you are passionate about quality inspection and machinery, we would love to hear from you. Show more Show less

Job Summary: We are seeking a skilled and proactive Structural Engineer with a strong background in PUF panel-based and prefabricated construction systems . The ideal candidate will be responsible for structural design, preparation of detailed drawings using AutoCAD, structural analysis and calculations, understanding and coordinating with the production team, and client interaction including site visits. This is a multi-functional role combining engineering, design, production coordination, and client-facing responsibilities. Key Responsibilities: Design & Engineering: Prepare accurate structural drawings, panel layouts, and connection details using AutoCAD and other design tools. Perform structural analysis and load calculations (dead, live, wind, seismic) for steel frames, PUF panels, and prefab components. Optimize designs for strength, stability, thermal efficiency, and cost-effectiveness. Ensure compliance with relevant IS codes , international standards, and project specifications. Generate Bill of Quantities (BOQ), material specifications, and technical documentation. Project & Production Coordination: Collaborate closely with the production and fabrication teams to ensure manufacturability and assembly feasibility. Provide guidance on fabrication tolerances, panel configurations, and quality standards. Monitor production schedules and technical requirements to align with design deliverables. Client & Site Coordination: Attend client meetings to understand project requirements and provide technical inputs. Present and explain design concepts and structural calculations to clients and consultants. Conduct site visits for assessment, verification, and coordination with installation teams. Provide on-site support during structural component installation when required. Required Skills & Qualifications: Bachelor’s degree in Civil Engineering / Structural Engineering (Master’s is a plus). Minimum 2–5 years of experience in structural design within the prefab or PUF panel industry. Proficiency in AutoCAD for 2D structural detailing; experience with tools like Staad.Pro, ETABS, or SAP2000 is a plus. Strong knowledge of structural analysis, steel structure behavior, and PUF panel applications. Familiarity with prefab production methods , insulation standards, and modular construction best practices. Good communication and interpersonal skills for effective client and team interaction. Willingness to travel for client site visits and project reviews . Preferred Attributes: Experience in cold storage , modular buildings , cleanroom , or industrial shed design . Knowledge of MEP coordination and integration with structural elements. Ability to work independently and manage multiple projects simultaneously. Proactive problem solver with attention to detail and a sense of ownership. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹35,000.00 per month Benefits: Paid sick time Schedule: Day shift Fixed shift Morning shift Ability to commute/relocate: Vaishali, Ghaziabad, Uttar Pradesh: Reliably commute or planning to relocate before starting work (Preferred) Education: Secondary(10th Pass) (Preferred) Experience: AutoCAD: 1 year (Preferred) Location: Vaishali, Ghaziabad, Uttar Pradesh (Preferred) Willingness to travel: 25% (Preferred) Work Location: In person

Job Requirements Roles and Responsibilities Develop detailed structural design models and drawings using AutoCAD and AVEVA E3D for onshore and offshore oil & gas facilities. Create and manage 3D models of structural elements such as piperacks, platforms, modules, equipment supports, staircases, ladders, handrails, and pipe bridges. Extract 2D General Arrangement (GA) drawings, sections, details, and fabrication drawings from the E3D model. Coordinate closely with piping, equipment, civil, and architectural teams to ensure interface compatibility and clash-free design. Apply knowledge of international codes and standards such as AISC, BS5950, IS800, Eurocodes, or API in structural detailing and modeling. Assist engineers in preparing material take-offs (MTOs) and quantity estimates from 3D models. Participate in model reviews, perform clash checks in AVEVA E3D, and incorporate comments from internal and client reviews. Integrate vendor-supplied data and structural connections in the design deliverables. Work Experience Required Skill Sets Strong proficiency in AutoCAD for 2D structural drawings and detailing. Hands-on experience with AVEVA E3D for 3D structural modeling and drawing production. Good understanding of structural steel design, framing plans, connection detailing, and fabrication-level drawings. Familiarity with structural load paths, equipment support structures, and platform design. Knowledge of industry standards and specifications for oil & gas structural design. Ability to read and interpret engineering documents such as load lists, equipment layouts, and foundation drawings. Good To Have Skills Working knowledge of structural analysis tools like STAAD.Pro, Tekla Structures, or ETABS. Experience with offshore structures: topside modules,jackets,flare stacks, living quarters, etc Familiarity with point cloud modeling and laser scan data in brownfield project integration. Understanding of BIM workflows, document control systems like SmartPlant Foundation, Aconex, or Autodesk Vault. Qualifications Diploma or Bachelor's Degree in Structural Engineering, Civil Engineering, or related drafting/design discipline. 3+ years of experience in structural design and drafting within the oil & gas, petrochemical, or heavy industrial sector. Prior involvement in EPC projects or multinational engineering teams is preferred Show more Show less

Company Description Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Job Description Job Summary We are seeking a highly skilled FAB Expert – HVAC Engineer to lead Dry Clean room design efforts for semiconductor fabrication (FAB) facilities. The ideal candidate will have deep expertise in semiconductor manufacturing processes, IS0 14644, industrial drying and Laminar flow systems. This role involves collaborating with cross-functional teams, ensuring compliance with industry standards, and driving innovative solutions for process efficiency and cost optimization. Responsibilities: Process Design & Optimization: Develop clean room HVAC system process and design basis. Develop optimum system configuration for cooling / heating/ humidification and De-humification. Equipment & Technology Integration: Assess and recommend equipment like Dry-cooling, dehumidification and desiccant dryers. Collaborate with vendors for equipment selection, installation, and validation. Compliance & Standards: Ensure adherence to industry regulations (SEMI, ISO, OSHA, ASHRAE, NFPA, NBC-2016 etc.). Work with regulatory bodies and internal teams to meet safety and environmental requirements. Collaboration & Coordination: Work closely with architects, MEP engineers, and facility planners for efficient utility layout designs. Coordinate with clients and stakeholders to align process requirements with project goals. Provide technical guidance to junior engineers and support training initiatives. Project Documentation: Understanding requirements for clean rooms Cooling / heating load estimations with Psychrometric analysis of process. Design basis report SLDs, I/O summery and Control logics Preferred Qualifications: Experience in greenfield and brownfield FAB design. Familiarity with sustainability practices in semiconductor manufacturing. Understanding of local authority regulations for FAB facility approvals and permitting Qualifications Bachelor's or Master’s degree in Chemical Engineering, Mechanical Engineering, or a related field. Ph.D. in semiconductor process engineering is a plus. 15+ years of experience in semiconductor fabrication, process engineering, or related fields. Hands-on experience with semiconductor HVAC and utility design. Strong understanding of the semiconductor manufacturing processes (lithography, etching, deposition, CMP, metrology, etc.). Experience with Energy modeling and simulation tools is an advantage. Additional Information Technical Skills: Strong knowledge of utility design for the semiconductor FABs. Proficiency in software tools like AutoCAD, Revit, BIM, and IES-VE. Soft Skills: Excellent problem-solving, analytical, and decision-making abilities. Strong communication skills for cross-functional teamwork and client interactions. Ability to manage multiple projects and work in a fast-paced environment. About AECOM AECOM is proud to offer comprehensive benefits to meet the diverse needs of our employees. Depending on your employment status, AECOM benefits may include medical, dental, vision, life, AD&D, disability benefits, paid time off, leaves of absences, voluntary benefits, perks, flexible work options, well-being resources, employee assistance program, business travel insurance, service recognition awards, retirement savings plan, and employee stock purchase plan. AECOM is the global infrastructure leader, committed to delivering a better world. As a trusted professional services firm powered by deep technical abilities, we solve our clients’ complex challenges in water, environment, energy, transportation and buildings. Our teams partner with public- and private-sector clients to create innovative, sustainable and resilient solutions throughout the project lifecycle – from advisory, planning, design and engineering to program and construction management. AECOM is a Fortune 500 firm that had revenue of $16.1 billion in fiscal year 2024. Learn more at aecom.com. What makes AECOM a great place to work You will be part of a global team that champions your growth and career ambitions. Work on groundbreaking projects - both in your local community and on a global scale - that are transforming our industry and shaping the future. With cutting-edge technology and a network of experts, you’ll have the resources to make a real impact. Our award-winning training and development programs are designed to expand your technical expertise and leadership skills, helping you build the career you’ve always envisioned. Here, you’ll find a welcoming workplace built on respect, collaboration and community - where you have the freedom to grow in a world of opportunity. As an Equal Opportunity Employer, we believe in your potential and are here to help you achieve it. All your information will be kept confidential according to EEO guidelines. ReqID: J10130476 Business Line: Building Engineering Business Group: DCS Strategic Business Unit: Europe & India Career Area: Engineering Work Location Model: Hybrid Legal Entity: AEC India Show more Show less

Oversee the quality assurance team and processes for sheet metal production. Develop and implement quality control protocols and procedures. Conduct regular audits and inspections to ensure compliance with quality standards resume-9812001068

Preferred candidate profile: Diploma/ITI/Fresher/BE-MECH Available in Hosur, Tamil Nadu Knowledge in 2D and 3D Mechanical drawing. Supervising, Report making, Inspection on Mechanical components. Freshers are welcome. Food allowance Annual bonus

Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions. Responsibilities:- Create 3D models and CAD drawings of engineered products/process equipment, including the creation of general arrangement, assembly, and fabrication drawings. Conversion of 2D Drawings to 3D Models, as well as modification, improvement, and reverse engineering of existing designs and products. Involve in sustaining the engineering of products/equipment like, keep them updated to meet the technological/manufacturing/market needs. Understanding P&ID, PFD, Equipment / Pump datasheets, 3D design and detailing of skid-based water treatment systems like UF, RO, CEDI, CIP, UV, Softeners, etc., Create Bills of Materials (BOMs) in an enterprise resource planning (ERP / SAP) system. Create and update the metadata of designs and 3D models in the PDM/PLM system (Vault Pro) for records, control, and retrieval. Cross-functional interaction/coordination to ensure product/equipment design meets the complete technical requirement. Collaborate with Product Engineers to address technical requirements and coordinate with the manufacturing team to address design and manufacturing queries. Coordinate with vendors on the selection of bought outs, considering alternatives, and ensure compliance with given specifications in consultation with Product / Project Engineers. Requirements:- BE., / B Tech in Mechanical Engineering with First Class. 3 to 5 years of hands-on experience in 3D CAD using Autodesk Inventor. Exposure in AutoCAD, CREO and Solid Works will be an added advantage but not a must. Experience in equipment/product design and detail engineering with fair knowledge of material specification, fabrication detailing, Limits, Fits, and GD&T, are preferred. Experience in equipment design and detail engineering in the domain of Water and Wastewater Treatment is preferred or similar experience in the Oil & Gas, Chemical processes and Power plants can be considered. Experience in detail engineering of skid-based water treatment systems like UF, RO, CEDI, CIP, UV, Softeners etc., with structural design and detailing of skid frames, and tank weldment assemblies are preferred. Experience in interconnecting piping, piping standards, material standards, and codes applicable to water and wastewater treatment equipment and systems are preferred. Exposure to MS Office package for preparing necessary documents, and Excel files ppt’s will be an advantage. Experience in working with international teams towards engineering design will be an advantage. Good communication skills to liaise with international teams; Extra miler / self-driven to meet commitments/goals. Be analytical and problem-solving. Skills and Competencies:- A 'can-do' attitude in responding, leading, and effecting changes Positive team- and client-focused attitude directed towards delivering quality work on time. Goes the extra mile to do his/her work; is self-driven and self-reliant to achieve success Strong communication skills to liaise with international teams and locations, communicate in a precise way, give and accept constructive feedback Be imaginative and ambitious and stimulate new ideas Be truthful and act with integrity and deliver on promises Join the global Xylem team to be a part of innovative technology solutions transforming water usage, conservation, and re-use. Our products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world. Show more Show less

Job Description Across level roles for Designer - Civil & Structural with Metal & Mining background /. Specialist Senior Designer in 3D Modelling & Detailing of Civil & Structural works related to M&M Must have worked in Tekla/Revit software for 3D Modelling & in Micro station & AutoCAD for 2D Drafting Experience in Civil #d software for earthwork will be added advantageous. Must have sound technical knowledge in Civil or Structural Hands on experience on model review/Clash check in SPR/Naviswork platform is must Civil & Structural designer -Taking responsibility of engineering of the assigned structures/foundation Modelling as per inputs & Extracting /checking of General Arrangement & Detail Drawings Reporting to Lead Civil Designer Lead Civil Engineer/Coordination with another disciplines & project Meeting the project schedules on submissions of Civil deliverables Ensuring all deliverables are comply with quality as per Wood /Client specifications & standards. Interpretation of vendor drawings/other discipline drawings for Civil & structural deliverables requirements Skills / Qualifications Qualification: D.C.E or ITI Civil Years of experience:10-15 yrs. Max 15 yrs. Must have exposure to modelling in any one of following Structures like Conveyor Gallery, Junction House, Pipe rack/ Pipe bridges & Process structures/Equipment support structures Equipment foundation such as Crusher, Screen, Compressor & pumps Pump Houses / Lift station and Tank farm Control room & Substation buildings Roads & Paving, Culvert, Storm water drains, & fire water system Experience in production of deliverables such as General arrangement drawings for Civil & steel works, RC Detail drawings, Steel connection detail drawing, Review of Fabrication drawings, UG service lay outs. Able to communicate in good English with other disciplines in effective manner. Must be able to work in a team with work share basis About Us Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. Show more Show less

Job Title: Project Engineer Location: Bihar [Current project Location] Employment Type: Full-time Key Responsibilities Develop and maintain long-term relationships with new and existing customers, identifying opportunities for account growth. Work in partnership with internal Project Managers to ensure seamless project execution. Understand project plans, specifications, and requirements, assisting contractors with project planning, scheduling, and operational phases. Participate in project design calls as needed and coordinate project processes. Assist in inventory procurement and management. Utilize vendors as a technical resource for material recommendations and specifications. Collaborate with architects and engineers to clarify drawings, specifications, and necessary addendums. Act as a resource for architects, engineers, and general contractors on budget pricing. Project Details managing multiple projects across various locations (not confined to a single project). Experience & Qualification Experience: 6-8 Years Education: B.Tech in Civil Engineering Salary & Benefits Salary Range: As Per Industry Standards Other Benefits Stay and food provided by the company Performance-based ESOPs Key Selection Criteria Project Handling Experience: Project Size: Managed projects of at least 30,000+ sqft. Project Value: Experience handling projects worth 10 Cr+. Project Volume Managed 5+ small-scale projects. Managed 2+ large-scale projects. Geographical Coverage: Experience handling projects across multiple states/regions. Client Handling: Experience working with major clients like L&T, Oil & Refineries Plants, and Metro Projects. Industry Experience: Exposure to industrial, logistics, warehouses, metro stations, bridges, etc. Execution Capability: Must have experience in both fabrication and erection of structures. Team Leadership: Led teams of 15+ employees. Vendor & Contractor Management: Negotiation experience with fabricators, erectors, and suppliers. Timeline Management: Ability to deliver projects within deadlines and budget constraints. Compliance & Safety: Knowledge of ISO 9001, EHS (Environmental, Health, and Safety), and statutory approvals. Site Challenges: Ability to solve issues related to weather delays, logistics, and manpower constraints. Software Proficiency: Working knowledge of AutoCAD, Tekla, MS Project, Primavera, SAP, or ERP tools. Materials & Procurement: Familiarity with steel grades, coatings, and procurement of PEB materials. Reporting & Documentation: Experience in MIS reporting, DPR (Daily Progress Reports), and client updates. Critical Factors Travel Requirements: Must be willing to travel to other office locations when required. Educational Qualification: Associate’s degree in Construction Management; Bachelor's degree preferred. Work Ethic: A strong sense of responsibility and dedication to the team, clients, and project success. Show more Show less