Responsibilities Ensure before starting of concrete Moisture correction at RMC Ensure effective RFI in daily share the team and complete as on the Day Facilitate Quality Performance Management RMC plant Ensure effective Non-conformance Management and risk management Facilitate Quality improvements and ensure best practices and CLQ are shared and applied in lifecycle management Ensure Project quality competencies and training effectiveness at plants Perform incoming material inspections. Perform the Cube/ Grouting test inspections. Review of batch slips and Material consumption Perform all vendor RMC plant monitoring Perform/ maintaining the Cube/ Grouting test report data with engineering team every month Ensure Effective the USS erection Qualifications Educational Qualifications: Bachelor’s Degree in Civil Engineering (B.E./B.Tech) A Diploma in Civil Engineering shall be acceptable for Asst Manager to Dy.Manager roles with strong field experience. Additional certifications in Quality Management Systems (e.g., ISO 9001, ASQ CQE) are advantageous. Professional Experience 3–7 years of experience in civil construction quality assurance/control, preferably in renewable energy or infrastructure projects. At least 1–2 years of hands-on experience in wind farm construction (foundation works, roadworks, crane pads, etc.) is highly desirable. Familiarity with international standards (e.g., ASTM, ACI, IS codes) and project-specific quality documentation (e.g., ITPs, SQPs, NCRs). Show more Show less

Company Description Adani Green Energy Limited (AGEL) is India's largest renewable energy company, playing a pivotal role in enabling the clean energy transition. The company develops, owns, and operates utility-scale grid-connected solar, wind, hybrid, and hydro-pumped storage renewable power plants. With over 11 GW of operating renewable capacity across 12 states and a target of achieving 50 GW by 2030, AGEL is committed to India's decarbonization goals. The company focuses on leveraging technology to reduce the Levelized Cost of Energy (LCOE) and facilitate the widespread adoption of affordable clean energy, showcasing its commitment to sustainable growth. Role Description This is a full-time, on-site role for an Assistant Manager at Adani Green Energy Ltd., located in Bhavnagar. The Assistant Manager will be responsible for overseeing daily operations, coordinating between departments, managing project timelines, and ensuring compliance with company standards. Additional tasks include preparing detailed reports, contributing to strategic planning, and facilitating communication across teams to ensure efficiency and productivity. The Assistant Manager will also be involved in leveraging technology to optimize processes and achieve operational excellence. Qualifications Project management, Operations management, and Strategic planning skills Excellent communication and interpersonal skills Proficiency in technology utilization to optimize processes Knowledge of renewable energy industry standards and compliance Ability to work independently and collaboratively in a team setting Experience in similar roles or in the energy sector is beneficial Bachelor's degree in Business Administration, Management, or related field Show more Show less

Responsibilities On-Ground Execution of Civil and Structural Work: Actively oversee the execution of foundation, road, and infrastructure construction tasks on-site, ensuring adherence to project design and technical standards. Monitor and guide construction teams and contractors daily to address technical challenges and ensure civil tasks are completed on time and to specifications. Real-Time Site Inspections And Quality Control Perform frequent site checks to verify that all civil works meet design specifications, safety regulations, and construction standards. Immediately identify and rectify material quality issues, construction errors, or structural discrepancies to maintain quality and prevent delays. On-Site Coordination With Other Teams Collaborate closely with electrical, mechanical, and structural teams to resolve cross-functional issues during construction, ensuring seamless integration of civil works into the overall project. Regularly communicate on-site with project managers, architects, and contractors to align daily activities with project timelines and technical goals. Material Management On Site Inspect and recommend suitable materials for ongoing work, ensuring timely availability to avoid disruptions in construction schedules. Monitor material usage directly at the site, maintain accurate inventory levels, and reduce waste to keep costs in check. Compliance With Safety And Environmental Standards Conduct daily safety inspections, ensuring all activities comply with local safety codes and environmental regulations. Act quickly to address any environmental risks, such as soil erosion or water contamination, by coordinating with environmental engineers and taking immediate corrective actions. On-Site Documentation And Reporting Keep detailed records of all on-ground activities, including design updates, inspection findings, and material usage logs, ensuring readiness for audits or reviews. Provide daily or weekly progress reports to supervisors, flagging any delays, technical hurdles, or areas needing attention for improvement. Qualifications Educational Qualifications: Bachelor's degree in Civil Engineering. Professional certifications in construction, project management, or structural engineering (preferred). Work Experience 3-5 years of experience in civil engineering roles, especially in large-scale infrastructure, construction, or renewable energy projects. Hands-on experience in site management, construction oversight, and civil infrastructure design. Show more Show less

Responsibilities Civil Work Execution: Supervise and manage all on-site civil construction activities, ensuring adherence to design specifications, project schedules, and quality standards. Coordinate with contractors and site teams to resolve execution challenges and maintain smooth progress across all civil works. Quality Assurance Monitor the quality of civil structures such as foundations, roads, and buildings, conducting inspections and addressing any deviations from standards. Implement corrective measures to ensure compliance with organizational and regulatory quality benchmarks. Safety And Compliance Enforce safety protocols and procedures during all civil activities, conducting regular safety audits to minimize risks and incidents. Ensure that all civil construction adheres to environmental regulations and statutory compliance requirements. Liaison With Authorities Collaborate with local government authorities and regulatory bodies to secure necessary permits, approvals, and clearances for civil construction. Build strong relationships with stakeholders to address administrative challenges and facilitate project execution. Resource And Material Management Plan and ensure the availability of required materials, machinery, and manpower at the site to meet project timelines. Optimize resource utilization and maintain detailed records of material usage and inventory for future audits. Reporting And Documentation Maintain comprehensive documentation of civil work progress, quality reports, and compliance certifications. Prepare regular progress updates and reports for senior management, highlighting challenges, milestones, and resolutions. Qualifications Educational Qualifications: Bachelor’s degree in Civil Engineering or a related field. A Master’s degree in Construction Management, Structural Engineering, or Project Management is advantageous. Certifications in safety management, environmental regulations, or quality assurance are a plus. Work Experience 13+ years of experience in civil engineering, specifically in the construction and execution of renewable energy projects (wind, solar, etc.). Proven experience in site management, civil works execution, and coordinating with contractors and local authorities. Strong background in quality assurance, safety compliance, and managing resources/materials on large-scale construction projects. Show more Show less

Responsibilities Execute Mechanical System Installations: Perform hands-on assembly, alignment, and installation of mechanical components, including turbines, shafts, and gearboxes, ensuring adherence to detailed design specifications and project requirements. Troubleshoot and resolve issues encountered during installation, such as improper alignments or structural inconsistencies, by applying technical expertise to ensure the system's reliability and safety. Conduct Mechanical Commissioning Tests Perform detailed testing and validation of mechanical systems during commissioning, ensuring all components function as intended and meet performance benchmarks under varying conditions. Document the results of each test, providing feedback on any operational discrepancies or areas that require further refinement to ensure readiness for project handover. Ensure On-Site Safety And Compliance Follow established safety protocols rigorously during all installation, testing, and maintenance activities, ensuring that personal and team safety is prioritized at every step. Actively inspect work areas for potential hazards, ensuring compliance with safety standards. Report any safety concerns or violations to supervisors for immediate resolution. Address Operational Issues Identify and address technical issues arising during installation or operation by conducting a thorough analysis of the problem and implementing corrective actions under supervision. Participate in root cause analysis for system faults, using diagnostic tools to determine the underlying causes and proposing viable solutions to minimize future disruptions. Perform Maintenance And Inspections Carry out routine inspections of turbines, rotating equipment, and mechanical assemblies to detect early signs of wear, damage, or inefficiencies. Ensure inspection findings are thoroughly documented. Execute preventive maintenance tasks, such as lubrication, tightening, and component replacements, to enhance the lifespan and performance of the mechanical systems while reducing unplanned downtime. Maintain Accurate Records Maintain detailed logs of all activities performed, including installation work, test results, inspections, and maintenance schedules, ensuring that records are accurate and up-to-date. Prepare comprehensive reports on task completions, outlining key observations, issues encountered, and recommendations for future action to enhance system efficiency and reliability. Qualifications Educational Background: Bachelor’s degree in Mechanical engineering, or a related field. Work Experience 3-5 years of experience in mechanical roles within renewable energy projects, including project design, implementation, and management. Proven expertise in integrating new technologies and leading technical teams is essential. Show more Show less

Responsibilities Execute Mechanical System Installations: Perform hands-on assembly, alignment, and installation of mechanical components, including turbines, shafts, and gearboxes, ensuring adherence to detailed design specifications and project requirements. Troubleshoot and resolve issues encountered during installation, such as improper alignments or structural inconsistencies, by applying technical expertise to ensure the system's reliability and safety. Conduct Mechanical Commissioning Tests Perform detailed testing and validation of mechanical systems during commissioning, ensuring all components function as intended and meet performance benchmarks under varying conditions. Document the results of each test, providing feedback on any operational discrepancies or areas that require further refinement to ensure readiness for project handover. Ensure On-Site Safety And Compliance Follow established safety protocols rigorously during all installation, testing, and maintenance activities, ensuring that personal and team safety is prioritized at every step. Actively inspect work areas for potential hazards, ensuring compliance with safety standards. Report any safety concerns or violations to supervisors for immediate resolution. Address Operational Issues Identify and address technical issues arising during installation or operation by conducting a thorough analysis of the problem and implementing corrective actions under supervision. Participate in root cause analysis for system faults, using diagnostic tools to determine the underlying causes and proposing viable solutions to minimize future disruptions. Perform Maintenance And Inspections Carry out routine inspections of turbines, rotating equipment, and mechanical assemblies to detect early signs of wear, damage, or inefficiencies. Ensure inspection findings are thoroughly documented. Execute preventive maintenance tasks, such as lubrication, tightening, and component replacements, to enhance the lifespan and performance of the mechanical systems while reducing unplanned downtime. Maintain Accurate Records Maintain detailed logs of all activities performed, including installation work, test results, inspections, and maintenance schedules, ensuring that records are accurate and up-to-date. Prepare comprehensive reports on task completions, outlining key observations, issues encountered, and recommendations for future action to enhance system efficiency and reliability. Qualifications Educational Background: Bachelor’s degree in Mechanical engineering, or a related field. Work Experience 3-5 years of experience in mechanical roles within renewable energy projects, including project design, implementation, and management. Proven expertise in integrating new technologies and leading technical teams is essential. Show more Show less

Responsibilities Team Leadership and Coordination: Supervise and mentor the electrical team, ensuring tasks are assigned effectively and team members are aligned with project goals. Facilitate regular team meetings to discuss progress, address challenges, and promote knowledge sharing on electrical systems. Strategic Planning And Oversight Develop and implement electrical execution strategies for wind projects, ensuring alignment with organizational objectives. Oversee the integration of electrical systems across projects to ensure seamless operations and optimized resource utilization. Advanced Troubleshooting And Technical Guidance Provide advanced technical solutions to resolve complex electrical system challenges encountered during execution and commissioning. Review and approve modifications to electrical designs or plans to ensure alignment with project needs and safety standards. Quality Assurance And Compliance Lead inspections and audits to ensure that electrical installations meet quality, regulatory, and safety standards. Oversee the development and enforcement of quality assurance protocols for electrical work in wind projects. Stakeholder Collaboration And Reporting Act as the primary liaison with project managers, contractors, and stakeholders for electrical-related concerns and updates. Prepare and present comprehensive electrical system performance reports to senior management, providing actionable insights. Resource Optimization And Cost Management Analyze resource allocation for electrical work, identifying opportunities for cost savings without compromising quality. Approve procurement plans for electrical equipment, ensuring alignment with budgetary and project requirements. Qualifications Educational Qualifications: Bachelor's degree in Electrical Engineering. Certification in Electrical Safety, Power Systems, or Renewable Energy (preferred). Work Experience 13+ years of experience in electrical engineering roles, with a focus on power plants, renewable energy systems, or industrial electrical installations. Proficiency in electrical system design, troubleshooting, and compliance with safety regulations. Show more Show less

Responsibilities SFQA sign off with stakeholder’s as on the Standardization Ensure effective RFI in daily share the team and complete as on the Day Facilitate Quality Performance Management USS Ensure effective Non-conformance Management and risk management Ensure effective Non- conformance / RCA / CAPA review every month Ensure Project quality competencies and training effectiveness Input from stakeholder’s performance review every month Ensure effective good practices of stakeholder’s performance Perform incoming material inspections. Conduct 100 % CFT inspections for USS Ensure effective RFI in daily share the team and complete as on the Day Facilitate Quality Performance Management 400 KV TOWER LINE Ensure effective Non-conformance Management and risk management Ensure Project quality competencies and training effectiveness Ensure effective good practices of stakeholder’s performance Perform incoming material inspections. Conduct 100 % signature test inspections for 400 KV Tower line Qualifications QUALIFICATIONS Bachelor’s Degree in Mechanical Engineering (B.E./B.Tech) or Diploma in Mechanical Engineering with relevant experience. Certification in Quality Management Systems (e.g., ISO 9001) is an advantage. Experience 3–5 years of experience in mechanical QA/QC roles, preferably in the wind energy or renewable energy sector. Hands-on experience in wind turbine mechanical installation and field quality inspections. Show more Show less

Responsibilities Execute Mechanical System Installations: Perform hands-on assembly, alignment, and installation of mechanical components, including turbines, shafts, and gearboxes, ensuring adherence to detailed design specifications and project requirements. Troubleshoot and resolve issues encountered during installation, such as improper alignments or structural inconsistencies, by applying technical expertise to ensure the system's reliability and safety. Conduct Mechanical Commissioning Tests Perform detailed testing and validation of mechanical systems during commissioning, ensuring all components function as intended and meet performance benchmarks under varying conditions. Document the results of each test, providing feedback on any operational discrepancies or areas that require further refinement to ensure readiness for project handover. Ensure On-Site Safety And Compliance Follow established safety protocols rigorously during all installation, testing, and maintenance activities, ensuring that personal and team safety is prioritized at every step. Actively inspect work areas for potential hazards, ensuring compliance with safety standards. Report any safety concerns or violations to supervisors for immediate resolution. Address Operational Issues Identify and address technical issues arising during installation or operation by conducting a thorough analysis of the problem and implementing corrective actions under supervision. Participate in root cause analysis for system faults, using diagnostic tools to determine the underlying causes and proposing viable solutions to minimize future disruptions. Perform Maintenance And Inspections Carry out routine inspections of turbines, rotating equipment, and mechanical assemblies to detect early signs of wear, damage, or inefficiencies. Ensure inspection findings are thoroughly documented. Execute preventive maintenance tasks, such as lubrication, tightening, and component replacements, to enhance the lifespan and performance of the mechanical systems while reducing unplanned downtime. Maintain Accurate Records Maintain detailed logs of all activities performed, including installation work, test results, inspections, and maintenance schedules, ensuring that records are accurate and up-to-date. Prepare comprehensive reports on task completions, outlining key observations, issues encountered, and recommendations for future action to enhance system efficiency and reliability. Qualifications Educational Background: Bachelor’s degree in Mechanical engineering, or a related field. Work Experience 3-5 years of experience in mechanical roles within renewable energy projects, including project design, implementation, and management. Proven expertise in integrating new technologies and leading technical teams is essential. Show more Show less

Responsibilities Execute Mechanical System Installations: Perform hands-on assembly, alignment, and installation of mechanical components, including turbines, shafts, and gearboxes, ensuring adherence to detailed design specifications and project requirements. Troubleshoot and resolve issues encountered during installation, such as improper alignments or structural inconsistencies, by applying technical expertise to ensure the system's reliability and safety. Conduct Mechanical Commissioning Tests Perform detailed testing and validation of mechanical systems during commissioning, ensuring all components function as intended and meet performance benchmarks under varying conditions. Document the results of each test, providing feedback on any operational discrepancies or areas that require further refinement to ensure readiness for project handover. Ensure On-Site Safety And Compliance Follow established safety protocols rigorously during all installation, testing, and maintenance activities, ensuring that personal and team safety is prioritized at every step. Actively inspect work areas for potential hazards, ensuring compliance with safety standards. Report any safety concerns or violations to supervisors for immediate resolution. Address Operational Issues Identify and address technical issues arising during installation or operation by conducting a thorough analysis of the problem and implementing corrective actions under supervision. Participate in root cause analysis for system faults, using diagnostic tools to determine the underlying causes and proposing viable solutions to minimize future disruptions. Perform Maintenance And Inspections Carry out routine inspections of turbines, rotating equipment, and mechanical assemblies to detect early signs of wear, damage, or inefficiencies. Ensure inspection findings are thoroughly documented. Execute preventive maintenance tasks, such as lubrication, tightening, and component replacements, to enhance the lifespan and performance of the mechanical systems while reducing unplanned downtime. Maintain Accurate Records Maintain detailed logs of all activities performed, including installation work, test results, inspections, and maintenance schedules, ensuring that records are accurate and up-to-date. Prepare comprehensive reports on task completions, outlining key observations, issues encountered, and recommendations for future action to enhance system efficiency and reliability. Qualifications Educational Background: Bachelor’s degree in Mechanical engineering, or a related field. Work Experience 3-5 years of experience in mechanical roles within renewable energy projects, including project design, implementation, and management. Proven expertise in integrating new technologies and leading technical teams is essential. Show more Show less

Responsibilities Day-to-day planning, leading, controlling, and coordinating of site activities. Responsible for Overall installation and commissioning of project with standard quality and safety manner. Execution of 132KV, 33KV line unit substation, (USS) and planning of site activities as per target HT cable underground laying work Foundation (Pit marking, Excavation, stub setting, Bar-bending concerting etc. Co-ordinate with surveyor according to survey profiles. Arrangement of materials for site activities. Stringing of power line crossings of 400/200/132/33 KV, railway crossing and road crossing (N-H & S-H) Stringing, insulator hosting, rough sag, final sag, paying out of quad conductor with the help of tensioner problems which come under foundation & stringing Installation, testing & commissioning of power transformer up to 315 MVA Installation, testing & commissioning of power transformer up to 333x3MVA (single phase) Installation, testing & commissioning of primary equipment’s like CB, ISO. CT, CVT, WT & LA etc. in the switchyard Installation, testing & commissioning of ACDB, DCDB Panels, battery charger & battery set and CRP panel Provide the technical support to contractors for the cable laying and termination work Erection, Testing, commissioning of HT & LT panels and earthing work as per drawing Illuminations work in substation building & switchyard Prepared of daily progress reports & next day working planning Handling charging permission from chief electrical inspector (CEIG) for substation & transmissions line Material reconciliation with store/suppliers & sub-contractor. Daily/weekly & Monthly progress report generation Transformer & HT panel testing Oil filtration HT/ LT Cable laying termination Cable testing Qualifications Educational Background: Bachelor’s degree in Electrical engineering, or a related field. Work Experience 3-5 years of experience in Electrical roles within renewable energy projects, including project design, implementation, and management. Proven expertise in integrating new technologies and leading technical teams is essential. Show more Show less

Responsibilities Execute Mechanical System Installations: Perform hands-on assembly, alignment, and installation of mechanical components, including turbines, shafts, and gearboxes, ensuring adherence to detailed design specifications and project requirements. Troubleshoot and resolve issues encountered during installation, such as improper alignments or structural inconsistencies, by applying technical expertise to ensure the system's reliability and safety. Conduct Mechanical Commissioning Tests Perform detailed testing and validation of mechanical systems during commissioning, ensuring all components function as intended and meet performance benchmarks under varying conditions. Document the results of each test, providing feedback on any operational discrepancies or areas that require further refinement to ensure readiness for project handover. Ensure On-Site Safety And Compliance Follow established safety protocols rigorously during all installation, testing, and maintenance activities, ensuring that personal and team safety is prioritized at every step. Actively inspect work areas for potential hazards, ensuring compliance with safety standards. Report any safety concerns or violations to supervisors for immediate resolution. Address Operational Issues Identify and address technical issues arising during installation or operation by conducting a thorough analysis of the problem and implementing corrective actions under supervision. Participate in root cause analysis for system faults, using diagnostic tools to determine the underlying causes and proposing viable solutions to minimize future disruptions. Perform Maintenance And Inspections Carry out routine inspections of turbines, rotating equipment, and mechanical assemblies to detect early signs of wear, damage, or inefficiencies. Ensure inspection findings are thoroughly documented. Execute preventive maintenance tasks, such as lubrication, tightening, and component replacements, to enhance the lifespan and performance of the mechanical systems while reducing unplanned downtime. Maintain Accurate Records Maintain detailed logs of all activities performed, including installation work, test results, inspections, and maintenance schedules, ensuring that records are accurate and up-to-date. Prepare comprehensive reports on task completions, outlining key observations, issues encountered, and recommendations for future action to enhance system efficiency and reliability. Qualifications Educational Background: Bachelor’s degree in Mechanical engineering, or a related field. Work Experience 3-5 years of experience in mechanical roles within renewable energy projects, including project design, implementation, and management. Proven expertise in integrating new technologies and leading technical teams is essential. Show more Show less

Responsibilities Ensure before starting of concrete Moisture correction at RMC Ensure effective RFI in daily share the team and complete as on the Day Facilitate Quality Performance Management RMC plant Ensure effective Non-conformance Management and risk management Facilitate Quality improvements and ensure best practices and CLQ are shared and applied in lifecycle management Ensure Project quality competencies and training effectiveness at plants Perform incoming material inspections. Perform the Cube/ Grouting test inspections. Review of batch slips and Material consumption Perform all vendor RMC palnt monitioring Perform/ maintaining the Cube/ Grouting test report data with engineering team every month Ensure Effective the USS erection Qualifications Educational Qualifications: Bachelor’s Degree in Civil Engineering (B.E./B.Tech) A Diploma in Civil Engineering shall be acceptable for Asst Manager roles with strong field experience. Additional certifications in Quality Management Systems (e.g., ISO 9001, ASQ CQE) are advantageous. Professional Experience 3–7 years of experience in civil construction quality assurance/control, preferably in renewable energy or infrastructure projects. At least 1–2 years of hands-on experience in wind farm construction (foundation works, roadworks, crane pads, etc.) is highly desirable. Familiarity with international standards (e.g., ASTM, ACI, IS codes) and project-specific quality documentation (e.g., ITPs, SQPs, NCRs). Show more Show less

Responsibilities Ensure effective RFI in daily share the team and complete as on the Day Ensure effective Non-conformance Management and risk management Coordinate with Project engineers for inspection and audit tasks. Perform incoming material inspections. Conduct 10% torquing inspections. Participate in MCC audits. Ensure effective RFI in daily share the team and complete as on the Day Ensure effective Non-conformance Management and risk management Coordinate with Project engineers for inspection and audit tasks. Perform incoming material inspections. Conduct 10% torquing inspections. Participate in MCC audits. Qualifications QUALIFICATIONS Bachelor’s Degree in Mechanical Engineering (B.E./B.Tech) or Diploma in Mechanical Engineering with relevant experience. Certification in Quality Management Systems (e.g., ISO 9001) is an advantage. Experience 3–7 years of experience in mechanical QA/QC roles, preferably in the wind energy or renewable energy sector. Hands-on experience in wind turbine mechanical installation and field quality inspections. Show more Show less

Responsibilities Day-to-day planning, leading, controlling, and coordinating of site activities. Responsible for Overall installation and commissioning of project with standard quality and safety manner. Execution of 132KV, 33KV line unit substation, (USS) and planning of site activities as per target HT cable underground laying work Foundation (Pit marking, Excavation, stub setting, Bar-bending concerting etc. Co-ordinate with surveyor according to survey profiles. Arrangement of materials for site activities. Stringing of power line crossings of 400/200/132/33 KV, railway crossing and road crossing (N-H & S-H) Stringing, insulator hosting, rough sag, final sag, paying out of quad conductor with the help of tensioner problems which come under foundation & stringing Installation, testing & commissioning of power transformer up to 315 MVA Installation, testing & commissioning of power transformer up to 333x3MVA (single phase) Installation, testing & commissioning of primary equipment’s like CB, ISO. CT, CVT, WT & LA etc. in the switchyard Installation, testing & commissioning of ACDB, DCDB Panels, battery charger & battery set and CRP panel Provide the technical support to contractors for the cable laying and termination work Erection, Testing, commissioning of HT & LT panels and earthing work as per drawing Illuminations work in substation building & switchyard Prepared of daily progress reports & next day working planning Handling charging permission from chief electrical inspector (CEIG) for substation & transmissions line Material reconciliation with store/suppliers & sub-contractor. Daily/weekly & Monthly progress report generation Transformer & HT panel testing Oil filtration HT/ LT Cable laying termination Cable testing Qualifications Educational Background: Bachelor’s degree in Electrical engineering, or a related field. Work Experience 3-5 years of experience in Electrical roles within renewable energy projects, including project design, implementation, and management. Proven expertise in integrating new technologies and leading technical teams is essential. Show more Show less

Responsibilities Oversee Mechanical System Design and Integration: Responsible for the design and integration of mechanical systems within renewable energy projects by developing detailed mechanical designs that ensure the efficiency and reliability of systems such as turbines, solar panels, and heat exchangers. Oversees the integration of these systems into the overall project, ensuring they meet performance specifications and operational requirements. Mechanical Installation And Commissioning Oversee the installation of mechanical components, ensuring they are correctly assembled and aligned according to design specifications. Coordinates with contractors and installation teams, supervises the commissioning process to validate system performance, and ensures that all systems are tested and operational before project handover. Ensuring Regulatory And Safety Compliance Ensures that all mechanical systems and processes comply with industry standards and regulatory requirements by developing and implementing procedures to meet safety, quality, and environmental regulations. Conducts regular inspections and audits to verify compliance and addresses any non-compliance issues by staying updated with regulatory changes and ensuring that all mechanical systems adhere to current standards and practices. Technical Problem-Solving And Issue Resolution Lead technical problem-solving and issue resolution during the design, installation, or operation of renewable energy systems by developing solutions, and implementing corrective actions. Runs analysis to identify root causes and innovative approaches to solving complex technical challenges, ensuring minimal disruption to project timelines and system performance. Manage Mechanical Maintenance And Optimization Oversee the routine maintenance of mechanical systems to ensure their long-term reliability and performance by developing maintenance schedules, implementing preventive maintenance practices, and optimizing system performance. Ensures that all maintenance activities are conducted efficiently and effectively, minimizing downtime and extending the lifespan of mechanical systems. Documentation And Reporting Oversee the documentation of mechanical system installations, maintenance activities, and site inspections, ensuring that all records comply with industry standards and safety regulations. Prepare and review mechanical performance reports, providing insights into equipment efficiency, potential issues, and recommending corrective actions. Qualifications Educational Background: Bachelor’s degree in Mechanical engineering, or a related field. Work Experience 13+ years of experience in mechanical roles within renewable energy projects, including project design, implementation, and management. Proven expertise in integrating new technologies and leading technical teams is essential. Show more Show less

Responsibilities Execute Mechanical System Installations: Perform hands-on assembly, alignment, and installation of mechanical components, including turbines, shafts, and gearboxes, ensuring adherence to detailed design specifications and project requirements. Troubleshoot and resolve issues encountered during installation, such as improper alignments or structural inconsistencies, by applying technical expertise to ensure the system's reliability and safety. Conduct Mechanical Commissioning Tests Perform detailed testing and validation of mechanical systems during commissioning, ensuring all components function as intended and meet performance benchmarks under varying conditions. Document the results of each test, providing feedback on any operational discrepancies or areas that require further refinement to ensure readiness for project handover. Ensure On-Site Safety And Compliance Follow established safety protocols rigorously during all installation, testing, and maintenance activities, ensuring that personal and team safety is prioritized at every step. Actively inspect work areas for potential hazards, ensuring compliance with safety standards. Report any safety concerns or violations to supervisors for immediate resolution. Address Operational Issues Identify and address technical issues arising during installation or operation by conducting a thorough analysis of the problem and implementing corrective actions under supervision. Participate in root cause analysis for system faults, using diagnostic tools to determine the underlying causes and proposing viable solutions to minimize future disruptions. Perform Maintenance And Inspections Carry out routine inspections of turbines, rotating equipment, and mechanical assemblies to detect early signs of wear, damage, or inefficiencies. Ensure inspection findings are thoroughly documented. Execute preventive maintenance tasks, such as lubrication, tightening, and component replacements, to enhance the lifespan and performance of the mechanical systems while reducing unplanned downtime. Maintain Accurate Records Maintain detailed logs of all activities performed, including installation work, test results, inspections, and maintenance schedules, ensuring that records are accurate and up-to-date. Prepare comprehensive reports on task completions, outlining key observations, issues encountered, and recommendations for future action to enhance system efficiency and reliability. Qualifications Educational Background: Bachelor’s degree in Mechanical engineering, or a related field. Work Experience 3-5 years of experience in mechanical roles within renewable energy projects, including project design, implementation, and management. Proven expertise in integrating new technologies and leading technical teams is essential. Show more Show less

Responsibilities SFQA sign off with all stakeholder’s as on the our Standardization Ensure effective RFI in daily share the team and complete as on the Day Facilitate Quality Performance Management WTG Ensure effective Non-conformance Management and risk management Facilitate Quality improvements and ensure best practices and CLQ are shared and applied in lifecycle management Ensure Project quality competencies and training effectiveness Input from stakeholder’s performance review every month Ensure effective good practices of stakeholder’s performance Ensure effective UD clear on as on the standardization Stakeholder’s RA bill clear as on protocol Product and Process Audits to secure Adani Standardization & Deployment all equipment’s Qualifications QUALIFICATIONS Bachelor’s Degree in Mechanical Engineering (B.E./B.Tech); Diploma holders with strong experience may also be considered. Certification in Quality Management Systems (e.g., ISO 9001, ASQ CQE) is preferred. Experience 5–10 years of experience in mechanical QA/QC roles, with at least 2–3 years in the wind energy or renewable energy sector. Hands-on experience in wind turbine mechanical installation, including tower assembly, nacelle and hub installation, and mechanical alignment. Show more Show less

Responsibilities Ensure effective RFI in daily share the team and complete as on the Day Facilitate Quality Performance Management WTG Ensure effective Non-conformance Management and risk management Facilitate Quality improvements and ensure best practices and CLQ are shared and applied in lifecycle management Ensure Project quality competencies and training effectiveness Input from stakeholder’s performance review every month Ensure effective good practices of stakeholder’s performance Ensure effective UD clear on as on the standardization Stakeholder’s RA bill clear as on protocol Product and Process Audits to secure Adani Standardization & Deployment all equipment’s Qualifications QUALIFICATIONS Bachelor’s Degree in Mechanical Engineering (B.E./B.Tech); Diploma holders with strong experience may also be considered. Certification in Quality Management Systems (e.g., ISO 9001, ASQ CQE) is preferred. Experience 5–10 years of experience in mechanical QA/QC roles, with at least 2–3 years in the wind energy or renewable energy sector. Hands-on experience in wind turbine mechanical installation, including tower assembly, nacelle and hub installation, and mechanical alignment. Show more Show less

Responsibilities SFQP Sign off done during the KOM or within 2 Days of all the contractors before the start of work at site. SFQP sign off copy shared to QA HO team (CQA) after taking sign off from the contractors. Doing Field Inspection on same day of sharing RFI by contractors. Incoming materials inspection on time (Same day) and maintaining its records IMIR on time of the inspection. Inspection Protocols are maintaining and reviewing on same time of inspections. All the inspection protocols and Trackers are maintaining and uploading in Adani OneDrive on time. NC logs are maintaining in OneDrive & online portal and sharing DQR on daily basis by E-mail Monitoring for timely closure of Non Conformity reports on weekly basis and send reminders by the E-mail messages and personally to the contractor's concern/responsible engineers and raising Penalty as per approved Penalty SOP. Doing meeting with contractors on quarterly basis and it's briefly details are maintaining in MOM and circulated by mail. Training module preparing and training (OJT) giving to the Adani team and contractors as per the scheduled by Site Quality Head.site according to the received Non conformations and its main purpose of reduce the NC's and repetitive points. Audit Points ( Internal & External ) are closing within the target dates and trying to minimize the received points for next upcoming audits. Witnessing all tools calibrations on time. Review, maintaining and updating calibration summery sheet timely and share MIS on monthly by E-mail. Check all the related documents during clearing contractors RA Bill. Hold and Debit amount from the bill due to Non Conformance and its details are maintaining in QCC Summery sheet and share MIS on monthly by E-mail. Monthly analysis of repetitive NC's RCA and CAPA to implementing at site for it's corrective actions. Ensure effective UD clear on as on the standardization Input from stakeholder’s ( Vendor ) performance review every month Qualifications QUALIFICATIONS Bachelor’s Degree in Civil Engineering (B.E./B.Tech); Diploma holders with strong experience may be considered. Certification in Quality Management Systems (e.g., ISO 9001, ASQ CQE) is a plus. Experience 5–10 years of experience in civil QA/QC roles, with at least 2–3 years in the wind energy or renewable energy sector. Proven experience in managing quality for large-scale infrastructure or energy projects. Show more Show less