47 Bim Modelling Jobs - Page 2

PHYSICAL WORK EXPERIENCE UNDER A MEP CONTRACTOR IN GULF PROJECT WILL BE AN ADDED ADVANTAGE FROM LOD 300-500

Role & responsibilities Experience in Revit - BIM Modeler Experience in developing 3D BIM models for architectural and structural disciplines using Revit. Understanding of construction drawings and project documentation . Coordination with the project team to ensure timely delivery. Strong communication and interpersonal skills. Ability to work under minimal supervision. Good problem-solving and analytical skills Preferred candidate profile Exp - 2 years in BIM Modeler

Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents. Co-ordinate the Electrical services with the building layouts and other services. Ensure that the drawings should comply all the requirements pertaining to the presentation, neatness and aesthetic view. Ensure that the drawings are prepared within the productivity norms. Responsibilites- Ensure the accuracy and technical correctness of the design and co ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Plumbing & Fire Fighting drawings with the civil and architectural layouts. Co-ordinate the Plumbing & Fire Fighting services with the Air- Conditioning, and Electrical services, including preparation of multiservice details. Resolution of technical difficulties with the professional team. Resolution of technical difficulties with the site team as directed by the Project Engineer. Design works required by the contract. Obtain drawing approval from the professional team. Issue the approved drawings to site. Maintain the working drawing register for the Plumbing & Fire Fighting drawings. Maintain the daily record of the work done including time sheet. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Engineer to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Plumbing & Fire Fighting systems for major commercial and light industrial buildings in the GCC. The services would include the following systems: External underground drainage systems. Soil and waste pipe works systems. Sanitary ware and bathroom fittings. Rain water surface water drainage Hot and cold water services. Fire Protection Systems LPG / SNG etc systems Fuel Oil Systems Understanding of the method of construction of buildings. Outline knowledge of the electrical and other mechanical service installations in buildings. Ability to communicate effectively in English - both orally and in writing Developed computer skills, particularly in computer aided drafting / 3D modeling packages, spreadsheets and databases. Detailed design ability to undertake pipe work sizing and pump duty calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Ability to read, understand, visualise and interpret drawings and specifications. An active personality, able to interact freely with his peers. Education - Diploma in Mechanical / Civil engineering / ITI Full time Course along with: Approved training in Plumbing / Fire Fighting Trade Approved training from a reputed institute in computer aided drafting packages particularly, Revit / Auto Cad and Microstation. Knowledge of BIM softwares such as Navisworks is must. Experience - 8 to 10 years engineering experience with at least 5 years in the preparation of Plumbing / Fire Fighting construction drawings for buildings. Minimum 2 years of international experience, preferably in GCC countries would be an advantage. Minimum 2 years of experience in Revit in 3D modelling Site experience in installation / execution would be an advantage. Undertakes the detailed design and preparation of working drawings for the Plumbing & Fire Fighting works for major commercial and light industrial buildings. Knowledge of BIM softwares such as Navisworks is must.

Role description: We are now recruiting talented individuals to fill our current vacancy forSenior BIMModeler to work on our projects inBangalore. Role accountabilities: Advanced Revit Electrical Experience. Managing CAD/BIM deliverables for multiple projects to completion within budget. Undertake self-checking initiatives whilst maintaining quality control of junior BIM modellers works and ensure adherence to all relevant design criteria and standards. Should have led the projects Independently including complete clash detection and clash resolution for projects, with other disciplines. Ensure Consistency of approach across Revit & BIM Output. Independently determines and develops approach to solutions. Advise and mentor junior BIM colleagues Hands on experience working with BIM 360 design review process Adhere to BIM Execution Plan and BIM projectworkflowcriteria. Hands on experience working with point cloud to as-built modelling using Revit (2D & 3D).and point cloud management. Knowledge of BIM Protocol, ISO 19650 and related BIM standards Set up and geo-locate multiple models for a single project. Hands-on Experience using BIM 360 cloud platform Creating and Managing Clash Analysis for the Projects Taking responsibility for technical quality assurance and client feedback and ensuring effective communication of any changes/ modifications. Collaborate and Coordinate with other disciplines to mitigate design challenges. Interface with engineers, our clients, and other consultants through clear communication and drawings. Liaisingwithand assisting thedesign professional and BIM Manager/ Coordinator. Adhere to the schedule and quality requirements. Working in collaboration with other design disciplines to ensure the integrity of the overall design.- Possess Excellent Communication and Interpersonal Skill. Software Expectations: Revit MEP Revit Family creation AutoCAD Navisworks Manage BIM360 Docs Management Autodesk Recap Proficiency in MicroStation is an added advantage General understanding of interoperability between software used to accomplish own discipline tasks. Any knowledge in Design Automation is added advantage. Performing other duties and responsibilities as required from time to time. Required competencies: Sound technical knowledge, academically good. Awareness of software used for BIM modelling. Good knowledge of Microsoft office. A strong,self-motivated,and assertive person capable of working under pressure. Team player. Well-developed interpersonal skills and the ability to communicate effectively at all levels. Flexible to adopt new work /challenge work as per business requirement. Qualifications & Experience: Diploma in Electrical Engineering/BE Electrical from a recognized University. 8+ yearsrelevant experience.

Role description: Fulfilling a senior role within the team, providing leadership, and mentoring to BIM teams. For managing technical aspects of BIM production for projects or components of major projects. For the development and implementation of BIM Execution Plans and project delivery strategy. To research and develops opportunity for process improvement, application and data integration with relevant BIM softwares. For managing the co-ordination and delivery of projects to meet time quality and budgetary targets, whilst meeting or exceeding Clients expectations. For the implementation, management, and delivery of BIM on projects at a Business Unit Level. To oversee the work and development of multiple colleagues working on large projects. Role accountabilities: Provide technical advice to team members, to support them in their delivery on the project. Coach and guide parties in the implementation and application of BIM. Provide technical BIM leadership at a project level. Provide internal training at a basic and intermediate level to all BIM staff. Clearly understand the clients intended end uses of models developed and continuously implement any improvements with modelling/BIM processes to better align with those end uses. Resolve complex modelling issues. Actively attempt to present technical achievements at industry events on regular occasions, at least one per year, to support a strong professional profile. Guide a project team through the BIM process and provide ad hoc assistance to the wider practice when required. Chair and attend BIM review meetings. Develop, review, approve and maintain the suite of BIM documentation guidelines including BIM standards, implementation plans and quality control procedures. Liaising with Country BIM leads to ensure systems, processes and documentation developed is in line with global standards and best practise. Creation of templates, families, and automation of software. Manage software products including but not limited to incorporating new version releases and customisation of these products. Plan, execute and manage the ongoing implementation of BIM within all disciplines in the region. Develop, implement, and enforce BIM workflow processes and best practise. Stay up to date with the latest best practise within BIM and the interaction of BIM software with other software used within the business. Provide quality control for completeness and adherence to company standards for all drawings released. Provide expert support in the resolution of technical issues in the application execution of BIM. Trouble shoot specific BIM related problems. Coordinate and establish project standards with clients, design teams and stakeholders. Identify trends and business opportunities relating to BIM and make recommendations. Review progress, compliance and clash detection reports produced by the project BIM coordinator. Define clash detection rules at various project stages, monitor the progress of the resolution of clashes and constructability issues. Produce periodic reports to the team expressing progress with compliance and clash resolution. Qualifications & Experience: Bachelors degree in Engineering or Architecture or Equivalent Courses / Technical Certification relating to BIM. Preferably Ten (10) years experience working with BIM Projects. Preferably Six (6) years experience in the use and application of BIM for International project design or construction. Preferably Three (3) years experience in multi-BIM management. Experience in managing and leading teams of BIM Modelers in the project environment. Knowledge of international standards codes and best practise in relation to the application of BIM into project including ISO19650, RIBA and AIA standards. Excellent written and verbal communication skills. Sound technical skills and ability to produce BIM models and CAD outputs to budget and programme. Ability to adopt and operate in a flexible manner to suit the audience and situation. Ability to build rapport with work colleagues. Experience in the use and application of BIM in consultant environment is essential. Must be able to work with, mentor, and develop BIM teams of lesser experienced BIM modeler. Experience in the integration and application of BIM in a multi-disciplinary environment. Have ability in setting up and coordinating a BIM Protocol and Execution Plan for a given project. Able to provide input to estimates for the engineering budget and schedule and to oversee technical resources to meet requirements on large and complex projects. Use appropriate scientific, technical, or engineering principles.

Role description: We are now recruiting talented individuals to fill our current vacancy for Associate Principal BIM Modeler/ Principal BIM Modeler to work on our projects in Bangalore/Noida/HyderabadTo be considered for a role we are seeking candidates with the following credentials: Job title: Associate Principal BIM Modeler/ Principal BIM Modeler Mechanical (UK Water Projects). Role accountabilities: Managing the production and verification of BIM models and drawings for selected projects (or components of projects) for Water team. Taking responsibility for technical quality assurance and client feedback and ensuring effective communication of any changes/ modifications. Proactively engaging with various Arcadis Regional offices/ teams regarding safe design requirements, and flag risks at appropriate levels. Resolving issues and create strong relationships with project colleagues in the regions, evidenced through great feedback. Reviewing work and drive the culture of checking and accountability in the team, including interdisciplinary checks Liaising with and assisting the design professional and BIM Manager Adhere to the schedule and quality requirements. Working in collaboration with other design disciplines to ensure the integrity of the overall design. Collaborate and Coordinate with other disciplines to mitigate design challenges. Design Health & Safety management for the project works. Develop BIM Execution Plan and BIM project workflow criteria. Follow BIM content standards and development procedures. Prepare own discipline model and/or content for BIM Coordination Meetings. High level of communication and good writing skills. Leveraging BIM software and tools as a methodology to coordinate design documentation. Follow BIM content standards and development procedures. May take the lead on developing some discipline specific BIM modeling content for project. Prepare own discipline model and/or content for BIM Coordination Meetings. Software Expectations: Good Knowledge of REVIT and Plant 3D (P&ID) Knowledge of BIM tools such as Autodesk Civil 3D, Navisworks Manage, BIM 360, etc. AutoCAD for drawing linkage and cleanup. MicroStation knowledge will be an added advantage. General understanding of interoperability between software used to accomplish own discipline tasks. Demonstrated delivery acumen. Experience in mechanical drawings and BIM models for medium to large scale projects related to, a. Treatment plants, b. Pumping stations and other related structures, c. Water and wastewater conveyance systems, d. P&IDs, and routing pipe as per P&ID, e. Storage tanks and pump station pipework, f. Design and development of Equipment and Piping layouts, g. Drainage systems, h. Flood protection facilities. Experience of delivering mechanical drawings and BIM models at all stages from concept through to final project and construction delivery. Knowledge/ experience in UK/ European water industry is preferable. Produce 2D drawings for new or improved products using industry, departmental and discipline standards. Preparation of design input to Design Team and co-ordinate with other staff to prepare drawings. Liaison with other team members to produce good design solution as per best design practice. Keeping up-to-date with innovations and developments. Performing other duties and responsibilities as required from time to time. Required competencies: Sound technical knowledge, academically good. Familiar with British codes, drawing standards and practices related to Mechanical/ water utility modelling and drawing production. Awareness of software used for BIM modelling. Good knowledge of Revit, Plant 3D, BIM 360 etc. Good knowledge of Microsoft office. A strong, self-motivated and assertive person capable of working under pressure. Well-developed interpersonal skills and the ability to communicate effectively at all levels. Flexible to adopt new work /challenge work as per business requirement. Compliance of Arcadis business management system. Health & Safety Management Performing other duties and responsibilities as required from time to time. This role provides Design or redesign complex models and drawings from general written or verbal specifications from Group Leader. Produce CAD drawings for new or improved products using industry, departmental and discipline standards. Preparation of design input to Design Team and co-ordinate with other staff to prepare drawings. Liaison with other team members to produce good design solution as per best design practice. Qualifications & Experience: Degree in Mechanical Engineering/BE Mechanical / from recognized University. 10 -14 years experience as BIM Modeler.

Role description: We are now recruiting talented individuals to fill our current vacancy for Senior BIM Modeler to work on our projects in Bangalore / Mumbai. To be considered for a role we are seeking candidates with the following credentials: Role accountabilities: Working independently as well as with team Preparation of BIM / CAD deliverables as per client requirement Liaison with lead business and other team members for preparation of design drawings. Working in collaboration with other design disciplines Compliance of Arcadis business management system Performing other duties and responsibilities as required from time to time Qualification & Experience: BE Civil/Diploma in Civil Engineering. BE preferred. 5+ years experience as BIM Technician working on Civil 3D software. Decent Revit skills will be an added advantage. Specific experience in BIM and CADD drafting for projects related to Earthwork, water supply, sewerage, and drainage system. Varied experience including roadway, drainage other civil infrastructure would be added advantage Excellent knowledge and experience in Civil 3D. Knowledge of Revit will be addon Experience in working on BIM Platform preferred Knowledge on Sub-assembly composer, Part Builder, Content Browser Expertise on Data-shortcuts, Import/export civil 3d data in other coordination softwares. Knowledge on Point cloud database and Control file sizes. Knowledge on modeling of junctions, varied slopes, ditches, Alignments, tables etc. Troubleshooting civil 3D issues. Preference will be given to experience in international projects (USA/UK/ Middle East, Australia) Familiar with preparation of Site Civil Plans, pipeline layout plan and profile, General Arrangement drawings for pumping station, water/ wastewater treatment works. Knowledge on Site Grading. A strong, self-motivated, and assertive person capable of working under pressure. Well-developed interpersonal skills and the ability to communicate effectively at all levels. Flexible to adopt new work & Timings Good Communication.

Principal Engineer / Technical Discipline Leader - Mechanical (ANA Water) Role description: We are currently recruiting highly skilled individuals for the position of a Principal Engineer / Technical Discipline Leader - Mechanical for our Water team. You would be based in Bangalore / Hyderabad / Mumbai. You are expected to lead and develop a team of engineers & modelers working on several complex and challenging projects in the North American region. Role accountabilities: An entry-level leadership role leads a large team. Support in developing functional area expertise Should be an independent problem solver Create opportunities to implement new digital approaches on your projects Independently develop methodologies and review methodologies developed by junior members of the team Coach your team on safe design processes and identify improvements in the wider business Ensure management and financial controls are in place across small to medium range projects Should take full ownership and make others accountable achieving 100% quality (processes/training/checklists) Should resolve issues regarding resources/scope/budget Should delegate tasks and assign roles to team members to achieve the agreed project and organizational outcomes Enforce training objectives where appropriate to achieve organizational goals and objectives Ensure that the industry best practices are adopted and implemented on projects Should play a key role in providing training, mentoring, and continuous feedback to first-time managers Collaborate within your team and other teams within GEC as well as regions to deliver. Ability to leading a team on various projects in line with client requirement. Should innovate to ensure your projects contribute to sustainable development and quality of life Liaison with other team members to produce good design solution as per the best design practice. Building a profile in the industry and keeping up-to-date with innovations and developments. Compliance of Arcadis business management system. Drive Health & Safety culture of the business within the team. Performing other duties and responsibilities as required from time to time. Qualifications & Experience: B.E in Mechanical Engineering / M.E / M. Tech in Civil Engineering / Environmental Engineering from a recognized University. 15+ years experience. Sound technical knowledge, academically good. Should have worked with and have experience working on ANA Projects. Should have led and delivered multi-disciplinary projects and have established strong relationships with members from ANA teams. Familiar with US codes, standards, and practices related to Mechanical ,Civil and Environmental Engineering. Awareness of software used for Piping and equipment modeling. Exposure to Water and Watewater Treatment Plants, Pump Stations, Process , Plant Hydraulics, Process Modeling Softwares viz, BIOWIN is highly desirable. Expousure to BIM Good knowledge of Microsoft office. A strong, self-motivated and assertive person capable of working under pressure. Well-developed interpersonal skills and the ability to communicate effectively at all levels. Flexible to adopt new work /challenge work as per business requirement.

Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents. Co-ordinate the Electrical services with the building layouts and other services. Ensure that the drawings should comply all the requirements pertaining to the presentation, neatness and aesthetic view. Ensure that the drawings are prepared within the productivity norms. Key Responsibilities Ensure the accuracy and technical correctness of the design and coordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Electrical drawings with the civil and architectural layouts. Co-ordinate the Electrical services with the Airconditioning, plumbing and fire fighting services, including preparation of multiservice details. Resolution of technical difficulties with the professional team. Resolution of technical difficulties with the site team as directed by the Project Engineer. Design works required by the contract. Obtain drawing approval from the professional team. Issue the approved drawings to site. Maintain the working drawing register for the Electrical drawings. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Engineer to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Medium, Low and Extra Low Electrical services for major commercial and light industrial buildings in the GCC. The services would include the following systems: MV power including switchgear, transformer and cabling. LV power including panels, distribution boards, cable containment, cables, Wiring and supply accessories. Lighting and emergency lighting including light fittings, controls and central battery system. Fire Alarm Security system including CCTV and access control. Voice and Data Standby Power Generation Uninterrupted power supply Building Management System (BMS) Solar Power System Earthing and Lightning protection Understanding of the method of construction of buildings. Outline knowledge of the electrical and other mechanical service installations in buildings. Ability to communicate effectively in English - both orally and in writing Developed computer skills, particularly in computer aided drafting packages spreadsheets and databases. Detailed design ability to undertake load distribution, cable and protection device selection and sizing calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defense requirements. Ability to read, understand, visualize and interpret drawings and specifications. An active personality, able to interact freely with his peers. Education - Diploma in Electrical engineering / ITI Full time Course along with: Approved training in Electrical Trade Approved training from a reputed institute in computer aided drafting packages particularly, Revit / Auto Cad and Microstation. Knowledge of BIM softwares such as Navisworks is must. Experience - 8 to 10 years engineering experience with at least 5 years in the preparation of Electrical construction drawings for buildings. Minimum 2 years of international experience, preferably in GCC countries. Minimum 2 years of experience in Revit and 3D modeling. Site experience in installation / execution would be an advantage. Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents.Knowledge of BIM softwares such as Navisworks is must. Undertakes the detailed design and preparation of working drawings for the Electrical works for major commercial and light industrial buildings.

Undertakes the detailed design and preparation of working drawings for the Plumbing & Fire Fighting works for major commercial and light industrial buildings. Knowledge of BIM softwares such as Navisworks is must. Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents. Co-ordinate the Electrical services with the building layouts and other services. Ensure that the drawings should comply all the requirements pertaining to the presentation, neatness and aesthetic view. Ensure that the drawings are prepared within the productivity norms. Responsibilites- Ensure the accuracy and technical correctness of the design and co ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Plumbing & Fire Fighting drawings with the civil and architectural layouts. Co-ordinate the Plumbing & Fire Fighting services with the Air- Conditioning, and Electrical services, including preparation of multiservice details. Resolution of technical difficulties with the professional team. Resolution of technical difficulties with the site team as directed by the Project Engineer. Design works required by the contract. Obtain drawing approval from the professional team. Issue the approved drawings to site. Maintain the working drawing register for the Plumbing & Fire Fighting drawings. Maintain the daily record of the work done including time sheet. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Engineer to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Plumbing & Fire Fighting systems for major commercial and light industrial buildings in the GCC. The services would include the following systems: External underground drainage systems. Soil and waste pipe works systems. Sanitary ware and bathroom fittings. Rain water surface water drainage Hot and cold water services. Fire Protection Systems LPG / SNG etc systems Fuel Oil Systems Understanding of the method of construction of buildings. Outline knowledge of the electrical and other mechanical service installations in buildings. Ability to communicate effectively in English - both orally and in writing Developed computer skills, particularly in computer aided drafting / 3D modeling packages, spreadsheets and databases. Detailed design ability to undertake pipe work sizing and pump duty calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Ability to read, understand, visualise and interpret drawings and specifications. An active personality, able to interact freely with his peers. Education - Diploma in Mechanical / Civil engineering / ITI Full time Course along with: Approved training in Plumbing / Fire Fighting Trade Approved training from a reputed institute in computer aided drafting packages particularly, Revit / AutoCad and Microstation. Knowledge of BIM softwares such as Navisworks is must. Experience - 8 to 10 years engineering experience with at least 5 years in the preparation of Plumbing / Fire Fighting construction drawings for buildings. Minimum 2 years of international experience, preferably in GCC countries would be an advantage. Minimum 2 years of experience in Revit in 3D modelling Site experience in installation / execution would be an advantage.

Role Summary This role involves working as part of an engineering consultancy design team in India. You will be involved in exciting new projects and liaison with the WSP UK Team. A typical week would include: Attending weekly meetings with the Digital Services Team to agree on workload for the week and prioritisation of tasks. Generation of spatial coordination tests (Clash detection) within Navisworks at agreed milestones, rationalising and producing reports indicating the issues to be coordinated. Walkthrough review of federated models to highlight potential buildability, operability, and maintainability issues. Updating Newforma Konekt / ACC Issues system with the issues found. Producing coordination reports from the Newforma Konekt / ACC Issues system. Working with the UK Digital Services team to assign issues to the appropriate organisations and persons to ensure robustly coordinated designs are delivered. Auditing of model information (Revit) against criteria. Peer review for the BIM documents and reporting. Prepare/Manage ACC Build checklists for ongoing construction. We'd love to hear from you if you have: A clear understanding of Building Information Modelling and its benefits to the construction Industry. A multidisciplinary approach to design, independent of background 4D scheduling and planning using Synchro Pro. Scan (Point cloud) to BIM modelling. Experience in using a variety of modelling packages and their interoperation Ability to manage multiple simultaneous projects while maintaining a deadline focus. Interpersonal skills, especially to help people through the information modelling process. Excellent time management skills and ability to prioritise. A passion for quality and continuous improvement with a focus on delivery

Role Summary We are seeking to recruit an ambitious and dynamic Principal Engineer to join the UK iCRC Highway team in Noida/Bengaluru to work alongside our UK discipline. We are looking for rounded individuals responsible for planning and managing the delivery of projects, including the adequacy of design, compliance with standards and legislation, resource time, cost, and quality. The position will report to the Head of the Discipline. Responsibilities Your principal role will be the day-to-day project management, responsible for leading and delivering various UK schemes. You will be functioning as a technical specialist who develops and applies advanced engineering concepts and approaches to unique engineering problems. You will seek innovation in the delivery of schemes and techniques used to design them. You will be active on a number of projects at any given time. You will be supported by a team of experienced and developing technical staff of various grades, to whom you will be expected to provide guidance and support as appropriate. You will be responsible for ensuring your projects are delivered to the budget, program and technical standards and meet QA, CDM, Sustainability, and HSE requirements. You will be involved in internal client liaison, financial control of projects, recruitments, business development activities, and production of fee proposals. You will Manage processes to ensure technical issues and risks are resolved in a timely and cost-effective manner. You will contribute to our Lean approach to driving efficiency and removing waste from our processes. You will be guiding, supervising, and directing all team members in technical and project management matters to ensure the effective delivery of projects whilst aiding the technical/professional development of the team. You will have direct line management, including mentoring and managing early career professionals ensuring technical excellence is in everything we deliver. You will provide the required assistance to the discipline head to produce periodic reports, such as project performance, forecast utilization and workload. You will be helping maintain the culture and positive working environment in the team. Key Competencies / Skills: Mandatory Skills You should be able to demonstrate a comprehensive knowledge of and experience of at least 5 years in UK highway design including road geometry, road restraint system, site clearance, pavement, signages, and road markings. You should be able to direct and check the use of relevant design software such as Civil 3D, Open Roads, MX, PDS/Key Line and Sign, AutoCAD and ProjectWise. You should have demonstrable experience of successfully leading a team and managing stakeholders. You should be able to lead teams and help with the operational management of a team of up to 10 staff. You should have demonstrable experience of resource and project management You should be able to produce technical specifications and reports You will be aware of current and emerging technologies relevant to the highways sector. Experience of liaison with clients, co-professionals and design team Excellent written and verbal communication skills Effective time management and strong organisational skills. Desired Skills Financial management Chartered or Incorporated Engineer status of a recognised professional institution. Experience on design and build projects Use of Lean in Highways Can demonstrate clear and successful liaison and coordination on multi-discipline projects and working knowledge of other disciplines technical capabilities and requirements. Qualifications You will have a bachelor s or post-graduate degree in Civil Engineering or equivalent with over 10 yearsyearsost-graduate experience in highway design Near Chartered or Incorporated Engineer with a recognized institution

Role Summary We are seeking to recruit an ambitious and dynamic Principal Engineer to join the UK iCRC Highway team in Noida/Bengaluru to work alongside our UK discipline. We are looking for rounded individuals responsible for planning and managing the delivery of projects, including the adequacy of design, compliance with standards and legislation, resource time, cost, and quality. The position will report to the Head of the Discipline. Responsibilities Your principal role will be the day-to-day project management, responsible for leading and delivering various UK schemes. You will be functioning as a technical specialist who develops and applies advanced engineering concepts and approaches to unique engineering problems. You will seek innovation in the delivery of schemes and techniques used to design them. You will be active on a number of projects at any given time. You will be supported by a team of experienced and developing technical staff of various grades, to whom you will be expected to provide guidance and support as appropriate. You will be responsible for ensuring your projects are delivered to the budget, program and technical standards and meet QA, CDM, Sustainability, and HSE requirements. You will be involved in internal client liaison, financial control of projects, recruitments, business development activities, and production of fee proposals. You will Manage processes to ensure technical issues and risks are resolved in a timely and cost-effective manner. You will contribute to our Lean approach to driving efficiency and removing waste from our processes. You will be guiding, supervising, and directing all team members in technical and project management matters to ensure the effective delivery of projects whilst aiding the technical/professional development of the team. You will have direct line management, including mentoring and managing early career professionals ensuring technical excellence is in everything we deliver. You will provide the required assistance to the discipline head to produce periodic reports, such as project performance, forecast utilization and workload. You will be helping maintain the culture and positive working environment in the team. Key Competencies / Skills: Mandatory Skills You should be able to demonstrate a comprehensive knowledge of and experience of at least 5 years in UK highway design including road geometry, road restraint system, site clearance, pavement, signages, and road markings. You should be able to direct and check the use of relevant design software such as Civil 3D, Open Roads, MX, PDS/Key Line and Sign, AutoCAD and ProjectWise. You should have demonstrable experience of successfully leading a team and managing stakeholders. You should be able to lead teams and help with the operational management of a team of up to 10 staff. You should have demonstrable experience of resource and project management You should be able to produce technical specifications and reports You will be aware of current and emerging technologies relevant to the highways sector. Experience of liaison with clients, co-professionals and design team Excellent written and verbal communication skills Effective time management and strong organisational skills. Desired Skills Financial management Chartered or Incorporated Engineer status of a recognised professional institution. Experience on design and build projects Use of Lean in Highways Can demonstrate clear and successful liaison and coordination on multi-discipline projects and working knowledge of other disciplines technical capabilities and requirements. Qualifications You will have a bachelor s or post-graduate degree in Civil Engineering or equivalent with over 10 yearsyearsost-graduate experience in highway design Near Chartered or Incorporated Engineer with a recognized institution

Job Description ROLES AND RESPONSIBILTIES- Lead the design and development of architectural projects from initial concept through construction documentation and completion. Collaborate with clients, consultants, and internal teams to understand project requirements and deliver exceptional design solutions. Oversee junior architects and support staff, ensuring quality and design intent are maintained throughout all project phases. Coordinate with structural, MEP, and other engineering disciplines. Review drawings, specifications, and construction documents for accuracy and compliance with local codes and regulations. Manage project timelines, budgets, and deliverables. Conduct site visits and inspections, ensuring construction aligns with design intent. Stay updated with industry trends, materials, and technologies. JOB REQUIREMENTS- Expertise in AutoCAD, Revit, SketchUp, and Adobe Creative Suite; knowledge of BIM workflows preferred. Strong knowledge of building codes, zoning regulations, construction methods, and detailing. Proven leadership in managing teams and clients with a collaborative, solutions-driven approach. Excellent communication, presentation, and organizational skills.

Position: Electrical BIM Modeler Company: BIMQP Location: Jaipur Experience: 1-5 years Availability: Immediate joiners preferred Key Responsibilities Develop and maintain accurate BIM models for electrical systems using Revit and related BIM tools. Collaborate with MEP engineers, architects, and other stakeholders to integrate electrical designs into multidisciplinary models. Prepare and update layout drawings, schematics, and electrical detailing based on project requirements. Participate in coordination meetings and resolve design conflicts using clash detection software (e.g., Navisworks). Ensure all models comply with project standards, client specifications, and BIM execution plans. Support the BIM team in model audits, quality checks, and documentation workflows. Requirements Diploma/Degree in Electrical Engineering or relevant field. 15 years of experience as an Electrical BIM Modeler, preferably in the building services domain. Proficiency in Autodesk Revit (MEP), AutoCAD, and Navisworks. Understanding of electrical systems in residential, commercial, or industrial projects. Strong attention to detail and ability to manage multiple tasks efficiently. Excellent communication and team collaboration skills. Additional Policy Client-Facing Role This position is client-facing and involves a high degree of responsibility and trust. As part of company policy and to ensure commitment and accountability, selected candidates will be required to choose one of the following two options as a form of professional security: Option 1: Submit any two original academic documents , such as: 12th grade mark sheet Graduation mark sheet Option 2: Submit undated salary cheque equivalent to two months salary to the company. These will only be used in case the candidate resigns without serving the required notice period , to help the company recover operational losses. (Note: This cheque will be return to you whenever you leave the company after serving your proper notice period) Why Join BIMQP? Work on diverse and challenging global projects. Be part of a growing and collaborative BIM-focused environment. Opportunities for continuous learning and professional development. To Apply: Send your resume and portfolio to V.harsh@bimqp.com]. Start Date: ASAP

Title: BIM Modeler No. of Positions: 01 Employment Type : Full-Time Domain: Construction - Civil Work Location: Narsingi, Kokapet, Hyderabad, Telangana Work Time: IST (9.30 AM to 6 PM) Mon to Sat Pay : 4 to 5.5 LPA Role & responsibilities Produce 2D & 3D drawings / identification of drawings based on the requirements. Should be able to understand the design requirements & architectural models and create detailed 2D & 3D designs for complex projects. Should be able to create a detailed design, schematics, blueprints for projects assigned. Work closely with the teams and co-ordinate & collaborate with others to establish timelines and budgets. Able to analyse data and situation and come up with creative solutions including Freehand Sketches. Prepare and maintain detailed documentation for designs / drawings with proper versions. Ensure that the drawings shall be in proper scale and comply with engineering standards. Flexible working with Third-Party Vendors / Implementation Partners. Perform variety of design/drafting activities including preparing/updating plan/profile drawings for pipeline, road alignment, grading using corridor modelling, pressure/gravity pipe network and ground terrain modelling Should be able to address the challenges and come up with solutions and alternatives. Should be able to visualize, analyse, and communicate designs with greater quality. Preferred candidate profile Around 3 to 5 years of proven experience on the above areas. Experience working in AutoCAD, Sketch UP, 3Ds Max, Revit or BIM 360. Working on Temple and School projects would be preferred but not mandatory. Qualifications : BE | Architecture | Civil What we offer : A supportive and collaborative work environment. Spiritually conducive workplace. Opportunities for professional growth and development through various projects. Competitive salary and benefits package. Food provided. HOW TO APPLY ? If you are a dedicated professional with a passion for supporting a divine cause, we encourage you to send your updated resume to vignesh.sanga@harekrishnacharities.org or Call/Whatsapp - 7075468441.

Job Title: BIM Modeler Architecture & MEP No. of Positions: 25 Experience Required: Minimum 2+ years Employment Type: Full-Time Work Location: Chennai (On-site only, no remote/WFH) Company: BIM Global Solutions Email to Apply: hr@bimgs.com Start Date: Immediate Salary: Best in industry Key Responsibilities: Develop accurate and detailed BIM models for Architectural and MEP systems using Autodesk Revit. Create custom Revit families as required by project needs. Extract BOQs and material take-offs from models. Produce high-quality sections, elevations, and 2D documentation . Conduct clash detection using tools like Navisworks and participate in clash coordination . Prepare precise shop drawings and construction-level documentation up to LOD 500 . Apply proper tagging, annotation, and dimensioning to all model outputs. Set up and manage sheet layout and sheet sets per project standards. Collaborate with architects, engineers, and other stakeholders to maintain model integrity and compliance with BIM standards. Required Qualifications: Diploma or Degree in Architecture, Mechanical, Electrical, or related fields. Minimum 2 years experience in BIM Modeling for Architecture and/or MEP . Strong command over Autodesk Revit , Navisworks , and BIM 360 . Proven experience across LOD 300 to LOD 500 stages. Working knowledge of clash detection, BOQ preparation, shop drawings, and drawing documentation . Clear understanding of BIM workflows , tagging , and sheet setting standards . Strong coordination, time management, and communication skills. Preferred Skills: Knowledge of AutoCAD, Dynamo, or other scripting tools for BIM automation. Exposure to international BIM standards (AIA, ISO 19650, PAS 1192). Experience working on multidisciplinary projects is a plus. How to Apply: Interested candidates should send their updated CV and BIM portfolio to: hr@bimgs.com

Hiring: Interior Design Manager / Architect / Jr. Architect in Jaipur. Exp: 3–10 yrs. Skills: Revit/ArchiCAD, interior detailing, coordination. Edu: B.Arch/B.Tech/Diploma. Full-time. Industry: Architecture & Interior Design. immediate Joiners Only.

Performing 2D & 3D modelling, detailing/drafting and related work including technical drawings, quality control, project coordination/communication and structural analysis if capable. Technical guidance and mentoring to engineers and technical modelers. Guide and review work done by other drafters/detailers and junior engineers. Responsible for quality and timely delivery of own work including budget control. Participate and contribute to project design reviews and discussions. Qualifications Diploma, Civil Engineering Graduate or Postgraduate from reputed engineering college or technical institute. Minimum 5 years of detailing/drafting experience. Hands on experience of modelling and drafting with AutoCAD, Revit and/or Tekla Experience in Revit is mandatory. Experience in precast detailing & steel shop drawings is preferred. Europe and particular Sweden project experience is required. Design experience with RC structures, steel structures, steel connection design, and timber structures, as well as knowledge of Eurocodes, is preferred. Design experience with prestressed systems/elements and precast concrete is a plus. Excellent communication skills in English are required.

ABOUT CONSERVE: Group Established in 2016 in Qatar, to serve the Construction Sector with Engineering Design Support Services to companies in Asia, Middle East, Europe, Australia, Canada, US and other parts of the world, we are an exponentially growing engineering company with 425+ People across the globe. Conserve provides wide range of services for green building and MEP solutions. Engineering design and support such as Architectural drawings, Structural drawings, MEP, BIM modeling, CAD services and 3D scanning. Sustainability such as LEED services, GSAS services, Energy services, CXA commissioning, Environmental services, Acoustical services, CEEQUAL consultancy services and BREEAM. Simulation and analysis such as Simulation engineering, Structural analysis, Stress analysis, Surge analysis, Computational fluid dynamics, detailed engineering services and Building envelope design and simulation. Thermal Imaging Infrared Thermography SKILL: Very good knowledge in Revit and Navisworks Software. Create parametric families. Model the entire service/system independently. Understand and work as per BIM Manual/Project Standards. Effective communication in English. Basic knowledge in their respective departments. Basic knowledge in MS Office. RESPONSIBILITIES: Develop BIM models for Architecture or ID services from design stage (LOD 300) to as-built (LOD 500) stage and coordinate between all other services. Ability to generate various Architecture or ID layouts, sections, elevations and details Clash detection and co-ordination using Navisworks Responsible for assisting the BIM leads and Senior BIM Modelers. Responsible for the quality and quantity of work done. Report to the Senior BIM Modelers and BIM leads. Raise potential issues in project then and there to the Senior BIM Modelers and BIM leads. Documentation of the project files. Direct responsibilities given during the course of time by managers. Extract BOQ from the REVIT file. EDUCATION & EXPERIENCE REQUIREMENT: Should possess 1 to 5 years experience in BIM Modeling Expertise in AutoCAD, Revit, Navisworks and BIM 360 Possess Excellent Communication and Interpersonal Skill. Preferred Experience in Gulf Project

Role & responsibilities : Create 3D BIM Models upto Lod500 from cad , pdf and point clouds in Revit for Work on Navisworks on clash detection and Bim Coordination projects Attend Coordination meetings Mentor Junior and Trainee BIM Modellers as required Assist Sr BIM Engineer/BIM Coordinator in complex BIM projects Quality checking completed projects Preferred candidate profile Minimum Experience :3 to 5 years Knowledge of AutoCAD, Revit and Navisworks Experience of working on US or UK based projects especially (Scan to BIM projects) Good Communication skills in English is mandatory Ability to lead a small team of Engineers will be an added advantage Should have good project coordination skills

Job Title: BIM Modeler Experience: Minimum 2-3 years Department: Architecture / MEP Job Summary: We are seeking a skilled and detail-oriented BIM Modeler with 23 years of professional experience to join our team. The ideal candidate will be responsible for creating and managing Building Information Models that support design and construction processes, ensuring accurate and coordinated digital representations of projects. Role & responsibilities Develop 3D BIM models using ArchiCad (or other BIM software as applicable) based on architectural, structural, and MEP drawings. Collaborate with architects, engineers, and other stakeholders to ensure model accuracy and coordination. Perform clash detection and resolve design conflicts using tools like Navisworks. Maintain and update BIM models throughout the design and construction phases. Prepare drawings, details, and schedules extracted from BIM models. Ensure adherence to company and client BIM standards and protocols. Participate in coordination meetings and contribute to design solutions. Assist in developing BIM libraries and improving modelling workflows. Requirements: Diploma/Degree in Architecture, Civil Engineering, or related field. 2-3 years of hands-on experience as a BIM Modeler in architecture, interiors, or engineering domains. Proficient in Autodesk Revit; knowledge of ArchiCad, Navisworks, and other BIM tools is an advantage. Strong attention to detail and problem-solving skills. Good communication and team collaboration abilities. Preferred Skills: Experience working on large scale projects. Knowledge of rendering tools or visualization techniques (e.g., Enscape, Lumion) is a plus.