46 Thermal Management Jobs - Page 2

Perform engineering calculations to support design concepts, including steady state and transient CFD simulations, turbulent flow analysis. Build CFD models of Battery Pack Systems/Fuel Cells systems to aid product/process development. Explore and perform Multiphysics and multiphase CFD simulations and improve modeling techniques. Collaborate with engineers from across teams to develop understanding by simulating process conditions like fluid-flow, thermal, chemical reaction etc. Support for the simulation platform CFD application in the application area of thermal management using our CFD Software solution Conduct technical discussions to collect and understand simulation requirements, propose solutions, and explain benefits of our approach.

ME / M.Tech / BE : Thermal /Heat Power/ Mechanical / Automobile / Aeronautical Role Responsibilities: Performing vehicle under hood thermal and aerodynamic simulations for full vehicle analysis using Star CCM+/POWERFLOW and model preparation using ANSA Conducting thermal assessments of under hood components to predict heat dissipation, airflow patterns, and temperature distributions for both Battery Electric Vehicles (BEV) and Internal Combustion (IC) vehicles Developing and validation of Computational Fluid Dynamics (CFD) models for thermal management, powertrain, energy storage, and HVAC system performance. Performing simulation setup, post-processing, and validation against experimental data Collaborating with design engineers to propose and implement design modifications that enhance thermal performance and meet regulatory requirements. Engaging with global teams to align on product development, methodologies and best practices Additional Skills: Experience in scripting and automation for ANSA and StarCCM+ to streamline simulation workflows. Familiarity with experimental validation techniques for CFD simulations. Experience in simulation methodology process development. Automotive industry experience with OEMs or Tier 1 suppliers. Required Skill Set: Expertise in ANSA for preprocessing and STAR-CCM+/Powerflow for CFD simulations related to underhood thermal management and aerodynamics. Strong understanding of vehicle aerodynamics, heat transfer mechanisms, and thermal interactions. Experience in simulating underhood thermal, heat exchangers, cooling ducts, and engine compartment airflow. Proficiency in setting up and solving transient and steady-state thermal and flow simulations. Ability to define boundary conditions, select appropriate turbulence models, and perform mesh optimization for accurate results. Experience in working with CAD data and model building logics for vehicle-level simulation. Strong knowledge of automotive thermal management. Experience in debugging and optimizing simulation models for computational efficiency. Strong understanding of CFD theory and vehicle energy systems. Excellent analytical, communication, and teamwork skills.

Hi Please find the below JD Key Responsibilities: 1. Power Management Software Development Develop and optimize platform-specific power management features on SoCs (based on custom Oryon CPUs). Implement DVFS (Dynamic Voltage and Frequency Scaling), Sleep/Wake logic, and rail/clock gating across CPU, NPU, GPU, and DSP domains. Integrate with Power Management ICs (PMICs) and configure resource power managers (RPMh, RSC). 2. Low Power Mode Enablement: Enable platform deep sleep, suspend-to-idle, and system sleep states tailored for Always-On (AON) use cases. Validate retention/restore sequences of SoC subsystems and memory during low-power modes. Integrate SPMI-based communication with PMIC for power domain control. 3. Thermal & Performance Scaling: Develop and tune thermal mitigation policies using sensors and thermal zones. Interface with Battery Management System (BMS) and configure thermal trip points. Implement CPUFreq/DevFreq drivers with QoS-aware thermal throttling and performance caps. 4. Power & Thermal Characterization: Measure and optimize platform power (active and idle) using Trepn Profiler, QDART, QPST, and onboard fuel gauges. Perform power regression analysis across software releases and feature integrations. Work with system architects to define performance-per-watt KPIs for devices (e.g., AI laptops, edge compute systems). 5. Firmware and Bootloader Integration: Collaborate with UEFI/TF-A developers to manage early-stage power initialization. Coordinate with XBL, ABL, and UEFI teams for seamless handoff of power states to Linux/Windows OS. 6. Debug & Bring-up Support: Triage system-level power and thermal issues with tools like QXDM, QPST, kernel logs, ftrace, trace32, JTAG. Work with silicon validation teams to debug board-level or SoC-level anomalies in power delivery or heat dissipation. 7. Cross-Team Collaboration: Partner with PMIC, platform, kernel, BSP, and thermal teams to co-design efficient power solutions. Support OEM/ODM partners in tuning and validating power features for commercial products (e.g., laptops or tablets). Contribute to system-level test plans and validations for power and thermal readiness at EVT/DVT stages. Required Expertise: 1. Qualcomm-Specific Knowledge: Hands-on experience with Resource Power Manager (RPMh), SPMI, TSENS, and CPR (Core Power Reduction) mechanisms. Familiarity with Oryon CPUs, Hexagon DSPs, Adreno GPU, and AI accelerators. Experience with tools: QXDM, QPST, Trepn Profiler, QDART, Dragonboard/CRB environments. 2. OS and Driver Development: Strong C/C++ development skills for Linux or Windows kernel power/thermal subsystems. Integration of custom PMIC or thermal drivers in AOSP or Yocto-based distributions. 3. Power Profiling & Tuning: Use of Trepn, PowerTOP, ftrace, perf, and RAPL-like interfaces for detailed power/perf analysis. Tuning performance-per-watt metrics across workloads (AI inference, GPU rendering, video playback, etc.). 4. Debugging and Analysis: Strong log analysis skills (kernel, ADB, QXDM). Familiarity with JTAG/debug probes, boot tracing, and event timelines for power issue debugging. Preferred Qualifications: Prior experience working on any platforms (reference or commercial). Familiarity with Linux on ARM64 and power management on ARM64 SoCs. Knowledge of modern thermal management techniques for fanless laptops or ultrabooks. Exposure to AI performance-power optimization, e.g., NPU power scaling for LLM workloads

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivitys R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise includematerials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. Roles and Responsibilities: The Data and Devices Business Unit in India is looking for Power cable assembly sustaining PDE. The Product Engineer is responsible for maintain existing Power cable assembly product lines, optimize for new products, from market definition through production and release. This position owns technical responsibility to solve technical problems, answer technical inquires from internal or external customers. Responsibilities & Qualifications Minimum : BS degree in Engineering required (Mechanical / System discipline preferred) At least 5 years of engineering experience in connector and cable assemblies Basic knowledge of Power cable is preferred Must have demonstrated experience in the following: Fundamental understanding of connector design and mechanical assembly and/or manufacturing techniques Design for Manufacturing (DFM) review, preparation, and presentation to address customer design, engineering, and manufacturing requirements Detailed understanding of manufacturing processes to include stamping, molding, plating, and automated product assembly Experience in development engineering and participation in full product development cycle Demonstrated proficiency in 3D Design Applications, Creo , ANSYS simulation beneficial Problem solving, customer complain handling, tolerance analysis are required Understanding of basic raw material property including both metal and resin Strong interpersonal communication and team working skills English language is a must to work with a global team or customers in both written and oral communication. Logic thinking with engineering discipline to guide daily work Power related design experience in power cable assembly is a strong plus Thermal management experience in power cable assembly is another strong plus Familiarity of switch, server equipment is preferred. Key Tasks: On time delivery of technical outputs with quality & cost target Key Tasks: Responsible for product lifecycle management with all technical ownership Maintain and optimize responsible product lines for lower cost, better performance or manufacturing efficiency Performs activities concerned with design, development, manufacturing and testing. Conceives ideas for new products and use the engineering tools to create models and drawings, introduce your concept to team and work with the team to develop an acceptable concept into practical product. Determines specifications, performs engineering analyses, makes preliminary sketches and design, coordinate and support operations such as fabrication of prototypes and testing. Interacts with customers, vendors, marketing and sales, and other engineering functions during mass production phase. Define and develop new Power product concepts which provide technical or cost advantages to the customer in order to improve TEs Data and Devices market position. Execute technical documentation to fully detail design drawings and requirements, engineering and product change notices, and design history file Interfaces with internal and external disciplines Reporting and regular communication to the engineering manager or project manager. Provide cross disciplinary product related advice about technical and technical-commercial aspects Have regular discussions on progress, work implementation and problems, priorities, analysis, CAE with other involved parties Advise and support manufacturing team and plants with technical solutions Vendor liaison at all levels as required, contracting (through procurement) and consultancy Assess customer technical complaints and resolve design-related quality issues Adopt and adapt to relevant engineering standards and practices. Specifically, Underwriters Laboratory and Electronic Industries Alliance Standards or equivalent Bring new technology of power cable solutions into production

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: Job Overview Power/Thermal Software products team at Qualcomm to achieve industry leading Power/Thermal/Limit SW management solution on Qualcomm Mobile, Automotive, Compute, IoT and AR/VR chipsets. In this position, the candidate will be working with cross-functional teams to identify Power optimizations/Perf tuning, thermal/limits HW tuning/characterization/risks assessment and provide optimized solutions with proper Mitigation. The candidate will need to perform system level analysis of Power/thermal use cases, expected to collaborate with Architecture, HW design, Performance, Power/Thermal Systems and various software teams to work towards optimal system level Power/thermal SW solution. In addition, the candidate will need to develop tools and methodologies for competitive analysis to learn about competitors strengths and weaknesses, and come up with thermal mitigations schemes that are best in the industry. Minimum Qualifications Bachelor's/Master’s degree in Engineering, Information Systems, Computer Science, or related field. 10+ years experience in embedded systems design & development with Programming Language such as C, C++, Java, Python, etc. Preferred Qualifications Systems/HW background with a good understanding of microprocessor architecture and common SoC hardware blocks (Interconnects, Display, Graphics etc.) Operating systems concepts - scheduling, memory management, process management, interrupt handling and device drivers Using debug tools like JTAG debugger, oscilloscopes, logic analyzers. Knowledge on power or Power/thermal management SW development. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 6+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 5+ years of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field and 4+ years of Software Engineering or related work experience. 3+ years of work experience with Programming Language such as C, C++, Java, Python, etc.

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world class products that meet and exceed customer needs. Qualcomm Software Engineers collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field. Preferred Qualifications: The ideal candidate needs to have: Embedded Windows software and good driver programming skills. Solid understanding of Operating System concepts. Windows kernel driver development experience. Understanding and experience in implementing power/thermal management software, state machines, ACPI & UEFI. Strong understanding of C/C++, Shell Scripting or Python skills and hands-on experience on debugging ARM or other SoC embedded systems. Strong communication and interpersonal skills. Strong problem solving and debugging skills. Ability to co-ordinate across stakeholders and drive towards task completion Principal Duties and Responsibilities: 1+ years of Software Engineering or related work experience. C/C++programming. Windows OS internals and Windows Driver knowledge about power/thermal management. Windows Device driver programming and debugging with WinDbg, JTAG/other tools. ARM Processor architecture and Assembly Language. Experience with PC software - System BIOS, UEFI, ACPI, Drivers, Applications Embedded OS (Kernel architecture, OS services heap, memory, multi-core, multi-threading, and crash debugging). Knowledge of OS/system performance profiling and optimization techniques. Communication, written & interpersonal skills, motivation, the ability to learn quickly. Level of Responsibility: Works under supervision. Decision-making affects direct area of work and/or work group. Requires verbal and written communication skills to convey basic, routine factual information. Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively.

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world class products that meet and exceed customer needs. Qualcomm Software Engineers collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. Principal Duties and Responsibilities: Power/Thermal Software products team at Qualcomm to achieve industry leading Power/Thermal/Limit SW management solution on Qualcomm Mobile, Automotive, Compute, IoT and AR/VR chipsets. In this position, the candidate will be working with cross-functional teams to identify Power optimizations/Perf tuning, thermal/limits HW tuning/characterization/risks assessment and provide optimized solutions with proper Mitigation. The candidate will need to perform system level analysis of Power/thermal use cases, expected to collaborate with Architecture, HW design, Performance, Power/Thermal Systems and various software teams to work towards optimal system level Power/thermal SW solution. In addition, the candidate will need to develop tools and methodologies for competitive analysis to learn about competitors strengths and weaknesses, and come up with thermal mitigations schemes that are best in the industry. Systems/HW background with a good understanding of microprocessor architecture and common SoC hardware blocks (Interconnects, Display, Graphics etc.) Operating systems concepts - scheduling, memory management, process management, interrupt handling and device drivers Using debug tools like JTAG debugger, oscilloscopes, logic analyzers. Knowledge on power or Power/thermal management SW development. In-depth knowledge in the areas of Embedded Systems, Microcontrollers, SoC Power, Modem, Multimedia, and Wireless communications, System level debugging and analysis for SoC power optimizations. Level of Responsibility: Works under supervision. Decision-making may affect work beyond immediate work group. Requires verbal and written communication skills to convey information. May require basic negotiation, influence, tact, etc. Tasks do not have defined steps; planning, problem-solving, and prioritization must occur to complete the tasks effectively.

We are looking for "Senior Product Manager – Delta Fan and Motor Business" with Minimum 15 years experience Contact- Yashra (95001 81847) Required Candidate profile 15+ yrs of exp in thermal product management or a related field, with a proven track record of managing complex product operations,optimizing processes. Thermal components/product management knowledge

Master of Science in Electrical, Electronic, Compute, Aerospace Engineering, or equivalent program Experienced in industrial or automotive (preferred) area (TIER1...) Understanding with embedded electronics design constraints Familiar with system/component design, EE architecture topologies and safety Solid understanding of system/component design Familiar with vehicle bus: ETH/CAN FD/LIN/LVDS communication protocols and troubleshooting tools Familiar with EMI/EMC design, test and troubleshooting Familiar with experience in thermal management for ECU embedded electronics Being able to support/handle more than one expertise domain as a plus Ability to participate and leading schematic and layout design reviews Justified PI/SI experience is a plus Altium tool min 3-6 Yrs. Altium Schematic Capture. Altium PCB Layout review High complex multilayer layout design PCB layer stack-up design. PCB design rules. PCB to Mechanical interfaces. PI/SI justified experience is a plus

Job Area: Engineering Group, Engineering Group > Mechanical Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Mechanical Engineer, you will design, analyze, troubleshoot, and test electro-mechanical systems and packaging. Qualcomm Engineers collaborate across functions to provide design information and complete project deliverables. Minimum Qualifications: Bachelor's degree in Mechanical Engineering or related field. Job Overview: The successful candidate will operate as a member of Corporate Engineering Hyderabad department. Responsibilities include working with US and India teams to perform thermal and structural analysis of high-performance electronic assemblies. Specific tasks include daily use of thermal and structural analysis software, taking concept layouts from the design team, creating representative analytical models, defining boundary and loading conditions, running simulations, analyzing results, and making recommendations for optimization of designs. The Engineer will interface with internal staff and outside partners in the fast-paced execution of a variety of multi-disciplined projects. Minimum Qualifications : Bachelor's / Masters degree in Mechanical/Thermal/ Electronic Engineering or a related field. 1-3 years actively involved in thermal and structural engineering analysis of high-density electronics packaging. Strong background in heat transfer fundamentals with a good understanding of electronics cooling technologies (passive and active). Knowledge of packaging technologies, electromechanical design, and thermal management materials. Analysis tools experience utilizing Flotherm,XT, Icepak, 6SigmaET, Celsius EC, Ansys, Abaqus, or equiv. Solid modeling experience utilizing Pro/E or Solidworks mechanical CAD system. Proven ability to work independently and collaboratively within a cross-functional team environment. Strong technical documentation skills and excellent written and verbal communication. Preferred Qualifications: Expected to possess a strong understanding of mechanical engineering and analysis fundamentals. Experience creating thermal and structural models of electronic circuit components, boards, and enclosures. Experience applying environmental spec conditions to analytical model boundary and loading conditions. Experience working with HW team for component, board, and system thermal power estimates. Experience specifying appropriate fans and heat sinks for electronic assemblies. Experience working with design teams for optimization based on analysis results. Demonstrated success in working with HW teams for appropriate thermal mitigation techniques. Proficiency with thermal testing (e.g.,LabVIEW, thermocouples, airflow measurements, thermal chambers, J-TAG) for computer hardware. Understands project goals and individual contribution toward those goals. Effectively communicates with project peers and engineering personnel via e-mail, web meetings, and instant messaging including status reports and illustrative presentation slides. Excellent verbal and written communication skills Interact and collaborate with other internal mechanical and electronics engineers for optimal product development processes and schedule execution. Effectively multitasks and meets aggressive schedules in a dynamic environment. Prepare and deliver design reviews to project team. Education Bachelor's / Masters degree in Mechanical/Thermal /Electronic Engineering or a related field. Keywords: Thermal analysis, electronics cooling, Flotherm, XT, Icepak, Celsius EC, thermal testing, thermal engineering, mechanical engineering.

Work with global suppliers (e.g., Chinese/Japanese/Korean cell and inverter manufacturers) to align on product standards and integration. Define and lead the company’s technical roadmap for battery pack design, BMS, container integration, and EMS. Required Candidate profile Min 5+ years of relevant experience in high voltage BESS or EV battery systems. (Deep knowledge of battery pack design, BMS, thermal management, and energy management systems.

1D Simulation Engineer: Bachelors/master s degree in Automobile or Mechanical Engineering 3 to 10 Years of experience in automotive simulation, vehicle performance, Climate Control and thermal management Strong basic knowledge in Fluid Mechanics, Heat Transfer and Multi-phase flows Strong knowledge in CFD fundamentals Cooling and Lubrication (C&L) Systems and 3D Thermal CAE using STAR CCM+, Hyper mesh Perform 1D system simulations using GT Suite to analyze and optimize vehicle performance, Climate control and thermal management systems. Calibrated thermal system that keeps the EDU within safe operating limits with derate functions in place. Thermal model accurately predicts system temperatures in real world driving conditions Develop new methodologies and handover to program tea m for day-to-day simulations. Collaborate with cross-functional teams to understand design requirements and develop simulation models accordingly.

Role Responsibilities Education: Bachelor's in Mechanical/Electrical Engineering or related field Experience: minimum 4 years in Li-ion battery system design, with a focus on thermal management. Proficiency in CAD and SolidWorks, Catia latest versions for battery design. Battery Technology: In-depth knowledge of Li-ion batteries, chemistry, and safety and their detailed characteristics. Thermal Management: Strong understanding of thermal control in battery systems. Component Selection: Ability to select appropriate components and materials. Safety Compliance: Familiarity with battery safety and regulatory standards. Process monitoring activities from design stage to final product. Required Experience on EV 2W, L3 and L5 segments battery design knowledge. Very good knowledge and experience handling the regulatory requirements for batteries like AIS 156 Basic knowledge on any one major CAD and SolidWorks, Catia. Creating of Engineering BOM and perform DFMEA of components & systems. Experience in Tooling concepts of battery components.

We are looking for a skilled Project Engineer / Sr. Project Engineer with 3 to 7 years of hands-on experience in electric wiring harness design and development using Creo Parametric. This crucial role involves designing complex wiring harnesses for various applications, ensuring optimal routing, connectivity, and performance. Your primary responsibilities will include creating detailed 3D models of wiring harnesses, including cables, connectors, and routing paths, using Creo Parametric's specialized modules. You will be responsible for developing comprehensive wiring diagrams and schematics, ensuring adherence to electrical engineering principles and industry standards. This role requires a deep understanding of electrical connectivity, signal integrity, and power distribution. You will collaborate closely with mechanical design teams to integrate wiring harnesses seamlessly within product assemblies, considering packaging constraints, thermal management, and ease of assembly. Furthermore, you will work with manufacturing and testing teams to ensure designs are manufacturable, testable, and meet all quality requirements. Experience with DFM (Design for Manufacturability) principles applied to wiring harnesses, including consideration for tooling and assembly processes, is highly valued. Your problem-solving skills will be essential in troubleshooting design challenges and optimizing harness layouts for performance and cost-effectiveness.

Would like to discuss about a job opportunity for the position "Engineer - Design & Development (EV Powertrain) for a Reputed Indian MNC @ Manali, Chennai Roles & Responsibilities: Should have experience in Design & Development of EV Powertrain, Proto type development, Troubleshooting & Validation of EV Systems Must be familiar with Motor Specifications such as torque, speed, efficiency, thermal management & motor controller Technical Documentation: Creating detailed documentation for designs, test results, user manuals, and maintenance guides Good knowledge in software tools like MATLAB/Simulink, Vector CAN analyzer, Bus master software, controller software flashing & Python coding for data analysis Desirable Candidates: Engineering graduate with 3+ years of experience in design & development of EV powertrain, preferably from Automotive Industry Share your updated CV, if interested Contact Person: Ms John blessy Executive Talent Search 9047088211 johnblessy.l@haarvard.com

Who We Are At Kyndryl, we design, build, manage and modernize the mission-critical technology systems that the world depends on every day. So why work at Kyndryl? We are always moving forward – always pushing ourselves to go further in our efforts to build a more equitable, inclusive world for our employees, our customers and our communities. The Role We are seeking an experienced and proactive Data Center Operations Manager to lead the operations and maintenance of our mission-critical data center infrastructure. The ideal candidate will have deep technical knowledge of HVAC systems , Building Management Systems (BMS) , power distribution and other critical facility systems, along with strong leadership and operational management skills. Key Responsibilities: Oversee the daily operations of the data center, ensuring 24/7 uptime and optimal performance of all critical infrastructure. Lead and manage a team of technicians and engineers responsible for HVAC, electrical, mechanical, and BMS systems. Ensure the reliability and efficiency of: HVAC systems (CRAC/CRAH units, chillers, cooling towers) Power distribution systems (UPS, PDUs, generators, switchgear) Building Management Systems (BMS) and DCIM platforms Develop and implement preventive and predictive maintenance programs. Manage vendor relationships and coordinate third-party maintenance and service contracts. Monitor and analyze system performance metrics and incident reports to drive continuous improvement. Ensure compliance with safety, environmental, and regulatory standards. Participate in capacity planning, infrastructure upgrades, and expansion projects. Prepare and manage MIS for operations, maintenance, and capital improvements. Lead incident response and root cause analysis for infrastructure-related issues. Required Skills and Qualifications: Bachelor’s degree in Mechanical, Electrical, or Facilities Engineering or a related field. 7+ years of experience in data center or critical facility operations, with at least 3 years in a managerial role. Strong technical expertise in: HVAC systems and thermal management Electrical infrastructure (UPS, generators, switchgear) BMS and SCADA systems Proven leadership and team management experience. Excellent problem-solving, communication, and organizational skills. Who You Are B.E. Electrical Being You Diversity is a whole lot more than what we look like or where we come from, it’s how we think and who we are. We welcome people of all cultures, backgrounds, and experiences. But we’re not doing it single-handily: Our Kyndryl Inclusion Networks are only one of many ways we create a workplace where all Kyndryls can find and provide support and advice. This dedication to welcoming everyone into our company means that Kyndryl gives you – and everyone next to you – the ability to bring your whole self to work, individually and collectively, and support the activation of our equitable culture. That’s the Kyndryl Way. What You Can Expect With state-of-the-art resources and Fortune 100 clients, every day is an opportunity to innovate, build new capabilities, new relationships, new processes, and new value. Kyndryl cares about your well-being and prides itself on offering benefits that give you choice, reflect the diversity of our employees and support you and your family through the moments that matter – wherever you are in your life journey. Our employee learning programs give you access to the best learning in the industry to receive certifications, including Microsoft, Google, Amazon, Skillsoft, and many more. Through our company-wide volunteering and giving platform, you can donate, start fundraisers, volunteer, and search over 2 million non-profit organizations. At Kyndryl, we invest heavily in you, we want you to succeed so that together, we will all succeed. Get Referred! If you know someone that works at Kyndryl, when asked ‘How Did You Hear About Us’ during the application process, select ‘Employee Referral’ and enter your contact's Kyndryl email address.

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Software Engineer, you will design, develop, create, modify, and validate embedded and cloud edge software, applications, and/or specialized utility programs that launch cutting-edge, world class products that meet and exceed customer needs. Qualcomm Software Engineers collaborate with systems, hardware, architecture, test engineers, and other teams to design system-level software solutions and obtain information on performance requirements and interfaces. Minimum Qualifications: "¢ Bachelor's degree in Engineering, Information Systems, Computer Science, or related field. Power/Thermal Software products team at Qualcomm to achieve industry leading Power/Thermal/Limit SW management solution on Qualcomm Mobile, Automotive, Compute, IoT and AR/VR chipsets. In this position, the candidate will be working with cross-functional teams to identify Power optimizations/Perf tuning, thermal/limits HW tuning/characterization/risks assessment and provide optimized solutions with proper Mitigation. The candidate will need to perform system level analysis of Power/thermal use cases, expected to collaborate with Architecture, HW design, Performance, Power/Thermal Systems and various software teams to work towards optimal system level Power/thermal SW solution. In addition, the candidate will need to develop tools and methodologies for competitive analysis to learn about competitors strengths and weaknesses, and come up with thermal mitigations schemes that are best in the industry. Additional About The Role Additional About The Role Systems/HW background with a good understanding of microprocessor architecture and common SoC hardware blocks (Interconnects, Display, Graphics etc.) Operating systems concepts - scheduling, memory management, process management, interrupt handling and device drivers Using debug tools like JTAG debugger, oscilloscopes, logic analyzers. Knowledge on power or Power/thermal management SW development. In-depth knowledge in the areas of Embedded Systems, Microcontrollers, SoC Power, Modem, Multimedia, and Wireless communications, System level debugging and analysis for SoC power optimizations.

Do you want to help solve the world's most pressing challengesFeeding the world's growing population and slowing climate change are two of the world's greatest challenges AGCO is a part of the solution! Join us to make your contribution, AGCO is looking to hire candidates for the position of Designer Engineer (ENG Aux), Your Impact Design & Development: Design engine auxiliary components and subsystems?including brackets, oil coolers, hoses, mounts, and ducts?ensuring integration with the core engine and vehicle architecture, 3D CAD Modeling: Create detailed 3D models and assemblies in PTC Creo, incorporating DFM principles and system-level constraints, 2D Drawing Creation: Develop accurate 2D manufacturing drawings using GD&T, ensuring compliance with drafting standards and manufacturing tolerances, Packaging & Integration: Conduct packaging studies to ensure proper fit of auxiliary components within engine bays and across vehicle variants, Design Validation: Support prototype builds and validation activities, addressing issues related to fitment, performance, and durability, Change Management: Prepare and manage Engineering Change Notices (ECNs), updating documentation and models as needed, Collaboration: Work closely with cross-functional teams, including engine core design, cooling, electrical, and manufacturing teams, to ensure system compatibility and functional requirements are met, PLM Usage: Utilize Windchill PLM to manage design data, track revisions, and support engineering release processes, Continuous Improvement: Identify opportunities to enhance product reliability, reduce cost, and improve ease of assembly and serviceability, Your Experience And Qualifications Bachelors degree in Mechanical Engineering or related discipline, 25 years of experience in engine or powertrain auxiliary system design, Proficiency in PTC Creo and familiarity with Windchill PLM, Strong understanding of engine layout, packaging, and thermal management systems, Experience in automotive, OffHighway, or industrial product development is highly desirable Your Benefits GLOBAL DIVERSITY Diversity means many things to us, different brands, cultures, nationalities, genders, generations even variety in our roles You make us unique! ENTERPRISING SPIRITEvery role adds value We're committed to helping you develop and grow to realize your potential, POSITIVE IMPACT Make it personal and help us feed the world, INNOVATIVE TECHNOLOGIES You can combine your love for technology with manufacturing excellence and work alongside teams of people worldwide who share your enthusiasm, MAKE THE MOST OF YOU Benefits include health care and wellness plans and flexible and virtual work option,, Your Workplace We value inclusion and recognize the innovation a diverse workforce delivers to our farmers Through our recruitment efforts, we are committed to building a team that includes a variety of experiences, backgrounds, cultures and perspectives, Join us as we bring agriculture into the future and apply now! Please note that this job posting is not designed to cover or contain a comprehensive listing of all required activities, duties, responsibilities, or benefits and may change at any time with or without notice, AGCO is proud to be an Equal Opportunity Employer,

Job TitleLead Engineer LocationBengaluru Work EmploymentFull time DepartmentCommon Engineering DomainMechanical Reporting toSenior Manager About Us: Tejas Networks is a global broadband, optical and wireless networking company, with a focus on technology, innovation and R&D. We design and manufacture high-performance wireline and wireless networking products for telecommunications service providers, internet service providers, utilities, defence and government entities in over 75 countries. Tejas has an extensive portfolio of leading-edge telecom products for building end-to-end telecom networks based on the latest technologies and global standards with IPR ownership. We are a part of the Tata Group, with Panatone Finvest Ltd. (a subsidiary of Tata Sons Pvt. Ltd.) being the majority shareholder. Tejas has a rich portfolio of patents and has shipped more than 900,000 systems across the globe with an uptime of 99.999%. Our product portfolio encompasses wireless technologies (4G/5G based on 3GPP and O-RAN standards), fiber broadband (GPON/XGS-PON), carrier-grade optical transmission (DWDM/OTN), packet switching and routing (Ethernet, PTN, IP/MPLS) and Direct-to-Mobile and Satellite-IoT communication platforms. Our unified network management suite simplifies network deployments and service implementation across all our products with advanced capabilities for predictive fault detection and resolution. As an R&D-driven company, we recognize that human intelligence is a core asset that drives the organization’s long-term success. Over 60% of our employees are in R&D, we are reshaping telecom networks, one innovation at a time. Why join Tejas: We are on a journey to connect the world with some of the most innovative products and solutions in the wireless and wireline optical networking domains. Would you like to be part of this journey and do something truly meaningful? Challenge yourself by working in Tejas’ fast-paced, autonomous learning environment and see your output and contributions become a part of live products worldwide. At Tejas, you will have the unique opportunity to work with cutting-edge technologies, alongside some of the industry’s brightest minds. From 5G to DWDM/ OTN, Switching and Routing, we work on technologies and solutions that create a connected society. Our solutions power over 500 networks across 75+ countries worldwide, and we’re constantly pushing boundaries to achieve more. If you thrive on taking ownership, have a passion for learning and enjoy challenging the status quo, we want to hear from you! Who we are The mechanical team at Tejas Networks plays a vital role in defining the physical appearance and functionality of the company’s products. Their responsibilities encompass a wide range of activities that ensure the mechanical aspects of the products are robust, reliable, and aligned with the overall system requirements. The comprehensive approach ensures that the mechanical team at Tejas Networks not only shapes the physical appearance of the products but also ensures they are durable, reliable, and meet all necessary performance standards. What you work: The selected candidate should lead the design and development of mechanical systems and components for telecom equipment, including enclosures, heat sinks, racks, and cable management solutions. Develop and refine 3D models and 2D drawings using advanced CAD tools (e.g., SolidWorks, Creo). Lead cross-functional teams in the execution of complex projects, from concept development through to production release. Manage timelines, resources, and budgets, ensuring project milestones are met. Oversee the prototyping process, working with suppliers and in-house teams to build and test prototypes. Mandatory skills: Lead design validation and verification processes, ensuring compliance with industry standards (e.g., NEBSGR-63-CORE, GR-487-CORE, ETSI, TSEC). Collaborate with product management, manufacturing, and quality assurance teams to ensure designs are optimized for production and meet customer requirements. Communicate effectively with stakeholders, providing regular updates on project status and technical challenges. Drive innovation in mechanical design, exploring new materials, technologies, and processes to enhance product performance and reduce costs. Identify opportunities for process improvements and lead initiatives to implement best practices in mechanical design and engineering. Desired skills: Strong leadership and project management skills. Excellent problem-solving abilities and attention to detail. Effective communication and interpersonal skills, with the ability to work across departments and levels. Proficiency in thermal management, structural analysis, and materials science as it relates to telecom equipment. Preferred Qualifications: Experience: 6 to 10 Years experience in Mechanical designing with Solidworks Education: BE / B. Tech / M. Tech in Mechanical Engineering Diversity and Inclusion Statement : Tejas Networks is an equal opportunity employer. We celebrate diversity and are committed to creating all inclusive environment for all employees. We welcome applicants of all backgrounds regardless of race color, religion, gender, sexual orientation, age or veteran status. Our goal is to build a workforce that reflects the diverse communities we serve and to ensure every employee feels valued and respected.

Responsibilities: * Create detailed mechanical designs using SolidWorks, Solid Edge 3D & Rendering. * Ensure compliance with fabrication standards in containerization industry. * Collaborate on enclosure and or Containerized design projects. Food allowance Health insurance

Role & responsibilities Design and develop printed circuit boards (PCBs) based on project requirements. Create schematic diagrams and translate them into PCB layouts using CAD software. Collaborate with cross-functional teams such as electrical engineers and product designers to ensure the PCB meets design specifications. Optimize PCB layout for signal integrity, power distribution, and thermal management. Perform design rule checks (DRC) and electrical rule checks (ERC) to verify design accuracy. Component Footprint/Landpattern modification and selection. Work with manufacturers to ensure that the PCBs are fabricated and assembled correctly. Troubleshoot and resolve issues during the prototype testing phase. Ensure compliance with industry standards and regulations, such as IPC standards and RoHS guidelines. Continuously improve designs for cost reduction, performance enhancement, and manufacturability. Maintain design documentation and version control for all PCB designs. Provide technical support and recommendations for board assembly and testing. Stay up to date with emerging technologies and design techniques in the PCB industry.