498 Jobs in Dahej - Page 5

Job Purpose Testing of battery materials in Coin / Pouch cell configurations Benchmarking of properties / performance with expected standards Improvements to existing cell performances

- Make amendments in specifications & work instructions as per QMS (Quality Management System) - Ensure testing of materials are carried out as per quality plan and SOP - Manage the non-conformity of products with proper resolutions and put forward the deviations of results to immediate superiors - Ensure timely calibration, repair & preventive maintenance of all the LAB equipment - Provide (OJT-On job training) to the team - Ensure good housekeeping standards are met in the laboratory - Follow BBS (Behaviour based safety) to maintain safety culture at workplace - Maintain "control samples" for as a part of material verification if required by the concerned customer/party after the delivery and handle complaints regarding quality deviation in material - Arrange, handle vendor audits and comply with the requirements & findings - Facilitate/verify SAP entries of COA (certificate of analysis) for exports - Manage AMCs (annual maintenance contract) for all LAB wares - Coordinate with external vendors to carry out analysis of various samples as and when required as a part of cross verification of the quality Turn on screen reader support

Inspecting Surface Preparation: Ensuring the substrate is properly prepared before coating application to achieve optimal adhesion and protection. Monitoring Coating Application: Observing the coating application process to ensure it aligns with the specified procedures and standards. Verifying Material Compliance: Confirming that the coatings used are the correct type and meet the specified standards. Performing Thickness Measurements: Using specialized tools to measure coating thickness and ensure it meets the required specifications. Identifying Defects: Looking for and documenting any defects or failures in the coating system. Recording and Reporting: Maintaining detailed records of inspections, defects found, and corrective actions taken. Recommending Corrective Actions: If defects are found, recommending appropriate corrective actions to ensure the coating system meets the required standards

Objectives of the Position Work as a DCS Officer according to the defined production processes, Production plan and Quality requirements. Operate the DCS systems by following all process safety and other EHS guidelines. Main Areas Of Responsibilities And Key Activities Coordinate and manage production in shift with consistent Quality and Safety as per the target. Support shift in charge for continuous improvement of process and Quality control to reduce batch cycle times, increase in yields, increase operational ease. Guiding a group of Operators in the plant continuously to ensure consistent product quality. Follow the norms as per the departmental operating procedures of ISO 9001, ISO 14001 & ISO 50001 Energy Management system. Coordinate with field operators in shifts to ensure high standards of EHS and 5S. Ensures compliance of BASF’s statutory requirements in shifts. Ensuring compliance to TDS requirements while performing activities like tanker loading, unloading, labelling, and packing as and when required. Ensure that discharge parameters of all the emissions in the plant are within the statutory limits and health and hygiene of the plant personnel is well maintained in the shifts. Compliance to process safety and environmental protection code as per BASF Practice. Ensure the documentation of Responsible care requirement on continual basis. Coordinate with Shift in charge and Field operators related to plant activities. Act as EHS representative in the shifts. For emergency in plant, take a lead and coordinate with incident controller. Job Requirements Education in BE Chemical Working Experience: 2-3 Years Technical & Professional Knowledge in Chemical Process Show more Show less

Objectives of the Position Site Cost controlling and Site Operation Support Representative Main Tasks Controlling Micro analysis and controlling site expenditure. Preparation of MIS relating to site expenditure to Site Head/Business Units/Regional Units. Monitoring and controlling discretionary cost. Establishing and Maintaining system and controls which verify the integrity of all systems, processes and data which enhance the Company’s value system. Product Costing Review and align production cost absorption in line with Site Capacity Utilization. Monitor variable utility cost and rate & updating in SAP in line with increase/decrease in utility rates. Finalize / continuous review of the allocation keys of service cost centers. Effective monitoring of Product cost, Cost Allocation, Cost Absorption and timely advising to Site Management on requirement of corrective measure to achieve establishing of fair and transparent cost structure. Forecasting Ensure proper estimation of plant & Infra site budgeted cost, discuss & align with respective Business Units, plant managers, various HOD for smoother process and accurate forecasting. In-depth analysis of Site Budget in line with Production Volume and establish cost variance, Business Units/Infra function wise with working and backups. Tax Management And Auditing Site Internal Audit coordination and implementation of action points. Coordinating and oversee all financial audit processes at site to achieve clean audit reports. Accounts Payable Ensure posting of all vendor bills on time along with proper documentation against GRN/Service Entry. Co-ordinate with various stakeholder for work cycle clearance. Employee Reimbursement Claim Report every week. Manage online transfers for government departments like GSPC, GIDC etc. Review and clearing GR/IR account. Document management in line with GST/Tax Audits. Manage vendor escalated queries/recoveries/reconciliation. Others Coordinate for Statutory Stock Audit Twice in a year/Reporting/nullifying the difference if any as per statutory audit requirement. Filing Statutory Returns as per the schedule like National Sample Survey. Asset Register and verification in Line with the Functional Fixed Asset System of Dahej Site. Trainings in Site Finance academy/advance excel/Cost optimization. Education & Qualification Cost Accountant/Masters in Commers with MBA in Finance 3-5 years of working experience in Finance/ Manufacturing setup Show more Show less

About BASF In India BASF has successfully partnered India’s progress for more than 130 years. As of the end of 2024, BASF had 2,411 employees in India with 8 production sites and 42 offices throughout the country. The Innovation Campus Mumbai and the Coatings Technical Center in Mangalore are both part of BASF’s global technology platform. In 2024, BASF registered sales of approximately €2.4 billion to customers in India. Further information is available on www.basf.com/in. O bjectives of the Position Functional leadership Plant Trainer (process safety) Optimise plant internal processes and procedures. Technical, Quality, and cost-effective manufacturing of Cellasto operations Value-based optimization and continuous improvement of plant equipment M ain Areas of Responsibilities and Key Activities MainTasks (Process Safety) Responsible for process optimization (procedures, automation, operator Systems etc) Responsible for process safety at plant. Responsible for the coordination and further development of the continuous improvement process Lead the implementation of process safety processes and practices according to the Responsible Care Management System Responsible for performing detailed process analysis. Responsible for implementing process changes in operations, including documentation Responsible for support by centers of competence or technology unit Responsible for operational innovations. Responsible for issues of plant safety (focus assets) Responsible for the development and documentation of plant safety, equipment investigations) Initiating and setting up of plant modifications/investments with focus on process and asset safety Collaboration in Process Manager community Act as competence center in Process Safety to provide advisory and training to the plant including support the site in preparing GU/RA audit concerning Process Safety. Coordinate all process safety programs, SHE review, MOC for the plants Plan and conduct PSM verification scheme. Manage gap analysis between existing practices and global/regional, GC requirements. Inform the plant management for upgradation as and when necessary Monitor the process safety performance and identify potential process safety issues by analyzing the incident reports and Process Safety Management verification results. Update Process Safety related guideline & regulation MainTasks (Asset Management) Define criteria for prioritization of maintenance work (in coordination with maintenance team) Support/Lead projects, Plan and execute CAPEX and OpEx plan as assigned by Plant Manager Initiate technical related improvement projects , digitalization, simplification. Development of asset condition & asset reliability. In lead to define and regularly review the maintenance- and spare parts strategy, considering the Asset Development Plan and agility plan by using integrated templates (in coordination with maintenance) Coordinate with maintenance team to develop RBM to define equipment criticality, make or buy concept, preventive maintenance strategy, equipment replacement plan & budget, FMEA, knowhow management Initiate definition of spare part strategy. Regularly review and control technical cost and relevant KPIs (monthly, quarterly) Define technical cost budget based on maintenance cost estimation and project plan (in coordination with Maintenance team) Collaboration in Asset Manager community Coordinate with maintenance team to Perform bad actor management, including data analysis, and initiate RCFA for complex issues, action plans with follow up Job Requirements Education B.E/B. in Tech (Chemical/Plastic) Working Experience 8 years & above Technical & Professional Knowledge in Chemical Process/Plastic processing machine operation Show more Show less

Objectives of the Position As a designated Shift Supervisor, takes responsibility of Safety, Production, Quality of System House plant in the shifts. Main Areas Of Responsibilities And Key Activities Coordinate and manage production in shift with consistent Quality and Safety as per the target. Manage the manpower planning in the shift. (Employee and Contractor) Continuous improvement of processes in coordination with the Plant Manager and his Deputy & Quality control to reduce batch cycle times, increase in yields, increase operational ease and ultimately leading to cost effective production. Whenever required, Coordinate with Supply chain and logistics team for adherence of production schedule and share the information to the team of change if any. Guiding a group of Operators in the plant continuously to ensure consistent product quality and safety. Implement Safety, Health and Environment system of the plant concerning man and equipment. Update knowledge and share the information of any change through proper channel. Ensure that discharge parameters of all the emissions in the plant are within the statutory limits and health and hygiene of the plant personnel is well maintained in the shifts. Ensuring proper implementation of norms as per the departmental operating procedures of ISO 9001, ISO 14001 & ISO 50001 Energy Management system. Guide shop floor personnel towards SHE (Safety, Health and Environment) /(RC)Responsible care /cleanliness of the plant (5S) /discipline for improving the BASF’s safe work culture in the shifts. This ensures compliance of BASF’s statutory requirements, which also includes the training of the subordinates regarding the safety aspects and handling of the critical hazardous chemicals. Ensuring compliance to TDS requirements while performing activities like tanker loading, Tanker unloading, labelling and packing as and when required. Adherence to the PPE usage by self and plant personnel, ensure work permit system is properly followed in the shifts. Adherence to target agreement and perform additional responsibilities as per given timeline Prepare and share production reports to higher management. Co-ordinate with site functions like Warehouse, Engineering , WWTP, Admin and Quality team. Compliance to process safety and environmental protection code as per BASF Practice. Ensure the documentation of Responsible care requirement on continual basis. Act as EHS representative in the shifts. As a Part of ERT(Emergency Response Team), rush to the incident spot in case of emergency in the site. For emergency in System House plant, take a lead and coordinate with incident controller. Job Requirements Education in B.Sc/ Diploma Working Experience from 4-5 Years Technical & Professional Knowledge of Chemical Process Show more Show less

Manpower Supply -Technician - Skilled worker Minimum 5 yrs of experience in the field of instrumentation required Having knowledge of various field instruments its erection commissioning required Minimum qualification ITI required GFL will assets before allocating work

Job Purpose To provide oversight and management for specialty chemicals plant and to lead team of production personnel associated with the Specialty Chemicals Plant Operation , lead pre-commissioning commissioning activities of the plant. Stabilize the product in the plant. Achieve the targets and Performances in the areas outlined below, in alignment with the Corporate Objectives and Companys Business Plans.

Job Purpose Ensure all activities under his/her control and supervision are compliant with all the laws of land and statutory requirement. Conduct all operation of function, ensuring social responsibility and accountabilities by following the company guideline of the same. Be responsible for ethical operation under his control. Be responsible for prevention, detection and reporting of bribery and other forms of corruption including breach of code of conduct and other company regulation. Avoid all such activity that could lead to or imply breach of code of conduct, anti-bribery and anti-corruption etc. To help define safety goals, develop implementation procedures, and ensure compliance for the company's safety programs. Consistently motivate other employees to effectively mitigate safety risks. Demonstrate visible felt leadership

Job Purpose Interface between Market and operations. Will be assisting Marketing for technical support will coordinate and support production for product improvement. Ensuring the quality of all products of Fluoroelastomers (FKM), polyvinylidene difluoride (PVDF) and polymer processing aids. QMS implementation, customer support and quality related all issues and action planning for it for doing continual improvement in overall quality.

Design and specify process equipment systems for pharmaceutical manufacturing plants, ensuring alignment with the project goals and regulatory standards (e.g., GMP, FDA, EMA). Select appropriate equipment, considering factors such as material compatibility, process requirements, automation, and cost-effectiveness. Develop equipment specifications, datasheets, and technical documentation for procurement and installation. Having hands on experience for installing isolator-based filling line. Line manufacturer is Bausch + Straubel, Syntegon, Steriline. Lead or support the execution of process equipment projects, including installation, commissioning, and qualification. Develop project plans, timelines, and budgets for equipment-related projects, ensuring the completion of all milestones on time and within scope. Coordinate with external vendors, suppliers, and contractors to ensure timely delivery and installation of process equipment. Oversee the installation and commissioning of new equipment and systems, ensuring smooth integration into existing operations.

Responsibilities: * Monitor equipment performance & troubleshoot issues * Follow safety protocols at all times * Maintain GLR, dryers, agitators, pumps & vacuum pumps * Operate distillation, filtration, reactors & columns Office cab/shuttle Food allowance

Role & responsibilities Client :- Petronet LNG - Dahej B.E/ Master of Science- 10 years,+ NACE- 2 Certified Coating inspection, Procedure approval, Guidance to contractor & workers, monitoring inventory.Graduate Engineer / masters in science with NACE level 2 experience 10 years out of which minimum 2 years in Petrochemical / fertilizer Coating inspection, Procedure approval, Guidance to contractor & workers, monitoring inventory. Client :- Petronet LNG -Dahej -Gujrat

Position Overview: We are seeking a skilled and experienced Production Panel Operator to oversee and manage hydrogenation and nitration processes in a continuous or batch manufacturing environment. The ideal candidate will be responsible for real-time monitoring, process control, and ensuring adherence to safety and operational standards. Key Responsibilities: Operate and monitor hydrogenation and nitration processes using DCS (Distributed Control Systems). Ensure smooth execution of daily production activities as per the production plan. Maintain continuous surveillance of the process plant and respond to deviations or emergencies. Record, compile, and report operational data accurately using ERP systems (preferably Oracle). Troubleshoot process issues and handle emergencies, including those involving Chloro/Fluoro batch processes. Ensure compliance with all safety regulations and company policies. Technical Skills Required: In-depth knowledge of hydrogenation and nitration processes. Proficiency in DCS operations and process monitoring. Experience with ERP systems (Oracle preferred). Strong troubleshooting skills and ability to manage chemical process emergencies . Familiarity with continuous and batch manufacturing environments. Behavioral Competencies: Effective communication skills Innovative and solution-oriented mindset Strong result orientation Excellent time management and organizational skills Please share your resume on ppsuman@godeepak.com

Job Description Designation : Senior Engineer(Industrial) Department : Project Management Location : Dahej/Sykha, Ahmedabad Job Overview : We are looking for a highly capable Senior Project engineer to manage our construction projects. You will be conducting land surveys, allocating resources, supervising multidisciplinary construction teams, and inspecting completed construction projects. Key Responsibilities: · Managing the planning and design stages of civil engineering projects. · Performing due diligence on the impact and feasibility of new construction sites. · Overseeing all project stages from preliminary layouts to final engineering designs. · Surveying new construction sites and assessing existing structures for upgrades. · Designing and recommending improvements to computer-aided design (CAD) software drawings and schematics. · Performing cost estimations and preparing project budgets. · Preparing work schedules and allocating resources, as well as supervising junior engineers, construction managers, workers, technicians, and contractors. · Ensuring that civil engineering projects are completed on time and within budget. Requirements: Bachelor's degree in civil engineering. State-licensed and certified civil engineer. A minimum of 5 years experience working as a senior civil engineer on similar projects. In-depth knowledge of civil engineering and construction specifications, standards, and codes. Great leadership, project management, decision-making, and problem-solving skills. Interested candidates can send me their resumes at: apply@capacite.co.in Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹35,000.00 per month Schedule: Day shift Experience: total work: 3 years (Preferred) Work Location: In person

Job Description:Job Title: Process Safety Manager – Chemical Industry - Dahej (Gujarat) Role Objective: Responsible for overseeing and managing all aspects of process safety within the organization Mentor, coach train site employees on process safety management programs Working closely with process chemicals and control engineers to ensure the production plant is set up to provide maximum output and efficient running of the production facility Coordinate preparation of major hazard risk assessments Job Responsibility I] Process Safety Program Development: Develop, implement, and maintain comprehensive process safety programs and policies specific to the chemical industry. Establish procedures for the identification, evaluation, and control of process safety hazards associated with chemical processes. II] Regulatory Compliance: Stay abreast of chemical industry-specific safety regulations, standards, and guidelines. Ensure the organization's compliance with local, state, and federal regulations related to chemical process safety. III] Hazard Analysis and Risk Assessment: Conduct thorough hazard analyses and risk assessments for chemical processes. Implement and manage risk reduction strategies, including the use of inherently safer design principles. IV] Process Safety Training: Develop and deliver process safety training programs tailored to the chemical industry. Ensure that employees involved in chemical processes are adequately trained on safety procedures, emergency response, and hazard communication. V] Safety Systems and Controls: Oversee the design, implementation, and maintenance of safety systems, including emergency shutdown systems, relief systems, and other safety instrumented systems specific to chemical processes. Ensure the effectiveness of engineering controls to prevent or mitigate chemical-related incidents. VI] Chemical Process Design and Engineering: Collaborate with design and engineering teams to incorporate process safety considerations into the design and modification of chemical processes and facilities. Conduct process hazard reviews and ensure compliance with industry best practices. VII] Emergency Response Planning: Develop and maintain emergency response plans specific to chemical processes. Conduct regular drills and exercises to test the effectiveness of emergency response procedures. VIII] Audits and Inspections: Conduct regular audits and inspections of chemical processes, equipment, and facilities to identify and rectify potential safety deficiencies. Collaborate with internal and external stakeholders to address identified issues.Key Skills:Mandatory: In-depth knowledge of chemical process safety regulations, standards, and best practices. Knowledge of relevant safety regulations and industry standards. Certification in process safety is desirable Experience in process safety within chemical industry. Target Industry: Chemical Manufacturing Gender: Male Experience: 9+ years of experience in process safety within chemical industry. Reporting to: EHS Head Job Location: Dahej (Gujarat) Working Days: 6 days Qualification: B.E / B Tech in chemical engineering + PDIS Notice Period: Immediate to 30 days Job Type: Full-time Pay: Up to ₹200,000.00 per month Schedule: Day shift Application Question(s): Current salary ? salary expectation ? Do you have experience in process safety in chemical industry ? Notice period ?( less than 15 days needed ) Work Location: In person

Design and specify process equipment systems for pharmaceutical manufacturing plants, ensuring alignment with the project goals and regulatory standards (e.g., GMP, FDA, EMA). Select appropriate equipment, considering factors such as material compatibility, process requirements, automation, and cost-effectiveness. Develop equipment specifications, datasheets, and technical documentation for procurement and installation. Having hands on experience for installing isolator-based filling line. Line manufacturer is Bausch + Straubel, Syntegon, Steriline. Lead or support the execution of process equipment projects, including installation, commissioning, and qualification. Develop project plans, timelines, and budgets for equipment-related projects, ensuring the completion of all milestones on time and within scope. Coordinate with external vendors, suppliers, and contractors to ensure timely delivery and installation of process equipment. Oversee the installation and commissioning of new equipment and systems, ensuring smooth integration into existing operations.

Packing Officer/Packing Executive: 0-5 yrs Salary package: 2.0 to 4.0 LPA Location: Dahej Company: Pharma API WP: 7383005000 Required Candidate profile Knowledge as packing officer at pharma, api, chemical or food companies prefer. Fresher with knowledge of packing can also apply.

Induspect (I) Pvt. Ltd. is a professionally managed Third Party Inspection & Technical Manpower supply company. Induspect provides Third/ second Party Inspection and technical manpower supply services Oil & Gas, Power, Infrastructure & Mining etc. with offices in Australia and India. In India our clients include Reliance Industries Limited, Larsen & Toubro etc. We have pool of experienced professionals spread all over Australasia and serve our clients in global locations. The company is ISO 9001:2015 certified that confirms our High quality Service Levels. Please visit www.induspect.com for further details. Job Description – Instrumentation Technician Client: GFL (Gujarat Fluorochemicals Ltd.) Location: [Dahej, Gujarat] Working Days: Monday to Sunday Working Hours: 12 Hours/Day (Shift-based) Job Description We are looking for Skilled Instrumentation Technicians for shutdown maintenance work at GFL. The candidate must have hands-on experience in field instrumentation along with erection and commissioning activities. The job involves rigorous daily operational responsibilities, requiring commitment and technical precision. Key Responsibilities Installation, calibration, and maintenance of field instruments (e.g., pressure, flow, temperature, level transmitters/sensors) Troubleshooting and repairing instrumentation equipment during plant shutdown Support in loop checking and commissioning activities Ensure proper wiring, cable termination, and panel connections Work in coordination with the electrical and mechanical team during shutdown operations Candidate Requirements Minimum Experience: 4–5 years in instrumentation (shutdown/plant maintenance preferred) Educational Qualification: ITI/Diploma/Degree in Instrument or equivalent Sound knowledge of: - Process instruments - Calibration tools (multimeter, calibrator, HART communicator) - Pneumatic and electronic instruments Ability to read P&ID, loop diagrams, and technical manuals If you're interested, please share your updated resume at recruitmentteam@induspect.in. Show more Show less

* Literature search, interpretation of analytical results and data compilation. * Planning and designing lab experiment, raw material sourcing and finding out synthetic pathways for new product/ process development. Required Candidate profile * Executing selection of synthetic routes and developing a cost effective, commercial viable and environment friendly process technologies.

Target Industry: Chemical Manufacturing Extensive experience of 15+ years in chemical manufacturing operations, preferably in a leadership role within a chemical plant Qualification: B.E / B Tech in Chemical Engineering Working Days: 6 days

Interview for ETP Operator & Supervisor on 06-06-2025, Friday for Chemical Company in Dahej ITI AOCP 1 to 5 Years Up to 4 LPA Budget No of Openings: 30 Send CV on sdpbharuch@gmail.com with Subject: ETP Dahej No Charges Share with your Friends Required Candidate profile Interview Venue: SDP HR Solution, Sixth Floor, 610, Golden Square, Beside Dmart, Near ABC Circle, Bholav, Bharuch Interview Time: 10:00 AM to 04:00 PM Free Job Share with your Friends & Colleagues!

Must to have exp. into Finalizing of Account, Balance Sheet, Profit & Loss, budgets, Cash Flow , Financial Reports, Tax like GST, TDS/TCS, Funding Coordinate with statutory, internal, & tax auditors for audits Required Candidate profile Must to have exp into SAP / FICO Module Good in Communication Must BE CA/ CMA only

Role & responsibilities Good knowledge About process research, ROS, synthetic chemistry To assist in literature, search for experimentation, and finding suitable reagents, and methods Maintaining lab records, and preparing proper as per GLP documentation. Housekeeping maintenance of Lab & specific hood To synthesize the impurities as per requirements in scheduled time period Process optimization, validation and assist demonstration of the process in plant for commercialization Performing experiments, analysing the results, and come up with simple and scalable process