139 Aircraft Maintenance Jobs - Page 4

The Aircraft Technician is responsible for carrying out maintenance tasks on Emirates and third party aircraft and components in accordance with laid down procedures and regulations The Aircraft Technician will work as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the trade disciplines for which they have been trained Job Accountability To carry out routine aircraft/engine/component servicing/ maintenance and/or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures for fluid replenishment, aircraft refuelling, aircraft systems charging/servicing as required To complete any component replacement and other maintenance activities as directed by immediate supervisor This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM) or other approved documentation required to carry out this task Assist Licensed Aircraft Engineers in `Walk around Checks on arrival and prior to departure as directed by the assigned engineer, in trouble shooting, defect rectifications and carrying out modifications while also performing instructions contained in job card Participate and promote in creating a safety culture in an effort to minimize accidents and highlight deficiencies/failures that can lead to such accidents Ensure all work locations are kept clean and excellent housekeeping conditions are maintained This includes being aware and communicating safety shortfalls To avoid FOD will be vigilant in ensuring work areas (including the ramp), vehicles, stands, lockers and that toolboxes are regularly audited, maintained and kept clean Should be fully conversant with airport safety regulations including holding and maintaining an airport driving permit Should be fully conversant with airport manoeuvring area requirements and be able to comply Work closely with supervisor, through the PM review system to agree on development plans including training, strengths and weaknesses and time frames for completion Grooming standards maintained and attendance to be maintained Ensure prompt attendance to all allocated tasks with the intent to maximize the ground time and avoid operational delays/ disruptions This will include obtaining aircraft/ component status brief from LAEs/ reports and preparing accordingly Should be able to communicate any aircraft/ component/ structural defects found to the LAE in an expedient manner and ensure during shift handovers all required information is clearly passed to the staff taking over before leaving the said aircraft/ workshop

Seeking a leader to oversee Flight Safety, manage the Safety Management System, and ensure compliance with quality standards. This role drives a safety culture, regulatory adherence, and operational excellence while fostering teamwork and efficiency.

Check for all anomalies in Pre-Ops window concerning aircraft rotation, proper tail assignment, Aircraft maintenance, aircraft base mismatch and Network Planning schedule integrity, ahead of upcoming operations and duly address and notify concerned stakeholders, resolving any potential disruptions concerning the above before the day of operations. Key Accountabilities Aircraft Availability & Maintenance Plan Adherence D+1 to D+3 Work closely with the MCC and maintenance planning to coordinate maintenance schedules and ensure that aircraft are available as required for flight operations. Responsible for making Daily Base-wise Aircraft Availability Reports based on maintenance Plan/technical restrictions as received from Engineering Planning/MCC. Work closely with MCC & Engineering planning to get Adjusted, amended, and managed maintenance slots as required to ensure compliance and schedule flexibility. Coordinate with Engineering planning/ MCC and ensure each aircraft allocated lines of flying can legally fulfil that flying within the hours/cycles and checks. Operational Compliance and Regulatory Adherence D+1 to D+3 Stay informed about regulatory changes, industry best practices, and safety recommendations within the specified time frame, incorporating updates into operational processes and procedures as necessary to mitigate risks and maintain compliance. Advance action and intimation to mitigate any potential risk of disruption in the published schedule within the pre-ops window. Develop and maintain strong working relationships with internal and external stakeholders, including network planning, maintenance, crew scheduling and airport operations. Advance action and intimation to mitigate any potential risk of disruption in the published schedule within the pre-ops window. Develop and maintain strong working relationships with internal and external stakeholders, including network planning, maintenance, crew scheduling and airport operations. Prepare various daily reports (such as Daily Disruption reports, Advance Planning Reports, slides for IOCC-Daily Brief, Pre-Ops Planning Agenda etc.) on network optimization, action taken and maintain record of the same. Ensure compliance with all regulatory requirements and company policies related to flight operations. Any other additional responsibility could be assigned to the role holder from time to time as a standalone project or regular work. The same would be suitably represented in the Primary responsibilities and agreed between the incumbent, reporting officer and HR. Skills Required for the role Strong Interpersonal skills Problem-Solving Team management skills Operational excellence Strong Conflict management skills Analytical approach Negotiation skills Key Interfaces Internal Interfaces Maintenance Collaboration with the maintenance department for aircraft availability and timely completion of regular checks. Educational and Experience Requirements Minimum Education Requirement Bachelor s degree/AME or its Equivalent Minimum Requirement Desired Experience 0-2 years of experience airline operations, preferably in IOCC. 2+ years of experience in airline operations, preferably in roles related to IOCC or in aircraft maintenance.

Job Purpose The Aircraft Technician is responsible for carrying out maintenance tasks on Emirates and third party aircraft and components in accordance with laid down procedures and regulations. The Aircraft Technician will work as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the trade disciplines for which they have been trained Job Accountability To carry out routine aircraft/engine/component servicing/ maintenance and/or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures for fluid replenishment, aircraft refuelling, aircraft systems charging/servicing as required. To complete any component replacement and other maintenance activities as directed by immediate supervisor. This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM) or other approved documentation required to carry out this task. Assist Licensed Aircraft Engineers in `Walk around Checks on arrival and prior to departure as directed by the assigned engineer, in trouble shooting, defect rectifications and carrying out modifications while also performing instructions contained in job card. Participate and promote in creating a safety culture in an effort to minimize accidents and highlight deficiencies/failures that can lead to such accidents. Ensure all work locations are kept clean and excellent housekeeping conditions are maintained. This includes being aware and communicating safety shortfalls. To avoid FOD will be vigilant in ensuring work areas (including the ramp), vehicles, stands, lockers and that toolboxes are regularly audited, maintained and kept clean. Should be fully conversant with airport safety regulations including holding and maintaining an airport driving permit. Should be fully conversant with airport manoeuvring area requirements and be able to comply. Work closely with supervisor, through the PM review system to agree on development plans including training, strengths and weaknesses and time frames for completion. Grooming standards maintained and attendance to be maintained. Ensure prompt attendance to all allocated tasks with the intent to maximize the ground time and avoid operational delays/ disruptions. This will include obtaining aircraft/ component status brief from LAEs/ reports and preparing accordingly. Should be able to communicate any aircraft/ component/ structural defects found to the LAE in an expedient manner and ensure during shift handovers all required information is clearly passed to the staff taking over before leaving the said aircraft/ workshop.

The Aircraft Maintenance Engineer will be responsible to ensure the ongoing maintenance of our aircraft fleet and sims at the FTO, in compliance with regulatory requirements and industry best practices. The AME will report to Maintenance Manager. Key Accountabilities Assist Maintenance Manager to develop and implement a maintenance program under Air India s Car 145 for the FTO fleet, ensure compliance with all regulatory requirements and industry best practices. Assist Maintenance Manager to develop and maintain a comprehensive maintenance program for all aircrafts and flight training devices, ensure maintenance and inspections, and tracking of maintenance records. Assist Maintenance Manager to develop and implement a stocking system and an ERP for optimal maintenance. Monitor the performance of the aircraft and equipment to identify potential issues and take corrective action, as necessary. Implement policies and training to maintenance personnel on best practices for aircraft maintenance and safety. Maintain accurate and up-to-date records of aircraft maintenance, inspections, and repairs. Any other additional responsibility could be assigned to the role holder from time to time as a standalone project or regular work. The same would be suitably represented in the Primary responsibilities and agreed between the incumbent, reporting officer and HR. Skills Required for the role. Strong Leadership Decision-making agility Strategic Planning Motivational Communication Skills Safety Commitment Interpersonal skills Adaptability Key Performance Indicators AOG time for aircrafts Utilization of aircrafts at FTO Inventory stocking practices Key Interfaces Internal Interfaces Internal Stakeholders Aviation Academy, Air India FTO team, Pilot Training units, Engineering, Training Support Staff, and Air India Management Team External Interfaces External Stakeholders Any FTO Partners, AI Cadets, Regulatory Authorities, Aircraft OEMs, MROs, equipment vendors Educational and Experience Requirements Minimum Desired Education requirements AME license in Category B1.2 or B3 in metal and composite category or B2 Bachelor s or Technical degree. Experience 5+ years experience in aircraft maintenance and airworthiness management Prior experience in DGCA-approved positions in FTOs/ATOs/Airlines in India Experience with single-and twin-engine fleet 10+ years experience in aircraft maintenance and airworthiness management Prior experience with similar fleet (Piper single-engine and Diamond multi-engine aircrafts)

Join a team recognized for leadership, innovation and diversity Lead Software Engineer Honeywell Aerospace Technologies MET COE Maintenance & Execution Transformation (MET) COE is dedicated to delivering best-in class solutions for Aircraft Maintenance both onboard and offboard across multiple Avionics platforms & customers which includes OEMs and Operators and also Execution Transformation through DevSecOps solutions for Aerospace Product Development. This role is for leading DevSecOps Strategy and Solutions. In this role, you would join our family of future shapers who design, develop, integrate & deliver complex solutions within MET COE and lead the technology & solution strategy for DevSecOps enabling transformation in the way we do product development in Aerospace Technologies. This role is also responsible to lead & create DevSecOps Solution Strategy & Technology roadmap, mentor & coach the team as a Subject Matter Expert and play global leadership role (Lead Software Engineer) interfacing multiple stakeholders including internal customers. You will work across disciplines to support the needed integration and deployment of solutions across Avionics programs. You are expected to hold the complete responsibility of DevSecOps Lifecycle for all product lines in Aerospace Technologies Avionics Systems. You are expected to drive value for business working closely Customers & IT. KEY RESPONSIBILITIES Establish Tools, Processes, Infra & Technology roadmap for AeroSPS and drive the necessary execution actions Stakeholder Management Customer VOCs, MOS w/ customers, counterparts & IT , Reporting DevSecOps activities Continuous Software Builds, Static Analysis/Security Scans, Continuous Integration, Testing & Deployment Develop and implement risk management strategies to ensure project success Lead initiatives and foster a culture of continuous learning and improvement within the team. Compliance and Regulatory Adherence: Ensure that all software development activities comply with relevant industry standards and regulatory requirements. Mentor and guide team on technical guidance. Knowledge of Aerospace Software Development Life Cycle, Processes, Practices & Tools SKILLS B.E / B. Tech / M.E / M. Tech in Electric / Electronics / Computers / Aerospace Engineering Minimum 12 years of experience working in software engineering / engineering tools / DevSecOps. End-to-End working experience with global teams in the area of product ownership, project engineering, product development Extensive Experience in DevSecOps using Contemporary Tools & Solutions Expertise working Engineering Tools Configuration Management, Requirements Management, Software Development, Static Analysis, Cyber Security is preferred. Experience with Aerospace Product Sw Development processes is an added advantage. Working experience with Tools Development Desktop & Web is an added advantage. Possess good understanding of business objectives and more importantly the ability to interact with our customers (internal and external). Able to identify and manage risks and opportunities with demonstrated capability to manage multiple projects Must have excellent communication, collaboration, and networking skills. JOB ID: HRD260443 Category: Engineering Location: HW Camp II,Bldgs 9A&9B,Plot C2,RMZ Ecoworld,Varturhobli,Sarjapur Marathahalli Outer Ring Road , Bangalore , KARNATAKA , 560103 , India Exempt Global (ALL)

Job Purpose The Aircraft Technician is responsible for carrying out maintenance tasks on Emirates and third party aircraft and components in accordance with laid down procedures and regulations. The Aircraft Technician will work as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the trade disciplines for which they have been trained Job Accountability To carry out routine aircraft/engine/component servicing/ maintenance and/or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures for fluid replenishment, aircraft refuelling, aircraft systems charging/servicing as required. To complete any component replacement and other maintenance activities as directed by immediate supervisor. This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM) or other approved documentation required to carry out this task. Assist Licensed Aircraft Engineers in `Walk around Checks on arrival and prior to departure as directed by the assigned engineer, in trouble shooting, defect rectifications and carrying out modifications while also performing instructions contained in job card. Participate and promote in creating a safety culture in an effort to minimize accidents and highlight deficiencies/failures that can lead to such accidents. Ensure all work locations are kept clean and excellent housekeeping conditions are maintained. This includes being aware and communicating safety shortfalls. To avoid FOD will be vigilant in ensuring work areas (including the ramp), vehicles, stands, lockers and that toolboxes are regularly audited, maintained and kept clean. Should be fully conversant with airport safety regulations including holding and maintaining an airport driving permit. Should be fully conversant with airport manoeuvring area requirements and be able to comply. Work closely with supervisor, through the PM review system to agree on development plans including training, strengths and weaknesses and time frames for completion. Grooming standards maintained and attendance to be maintained. Ensure prompt attendance to all allocated tasks with the intent to maximize the ground time and avoid operational delays/ disruptions. This will include obtaining aircraft/ component status brief from LAEs/ reports and preparing accordingly. Should be able to communicate any aircraft/ component/ structural defects found to the LAE in an expedient manner and ensure during shift handovers all required information is clearly passed to the staff taking over before leaving the said aircraft/ workshop.

Job Details Position : JUNIOR STORES EXECUTIVE Job Location BANGALORE HO, HYDERABAD, BELGAUM, NASHIK Areas of interest STORES LOGISTICS Job Type Professional Job ID SA-J539 Minimum requirements Qualification : Graduate or AME/Diploma in Engineering or Degree in Engineering in the appropriate branch or ITI Diploma Experience: Should have at least 1 years of work experience in Aircraft maintenance / 6 months in stores. Key Responsibilities Verification of item with respect to GRN/Serviceable Tag Binning of serviceable/new item into stock. Responsible for disposal file preparation and circulation for unserviceable items. Binning of item in location and maintenance of store/bin master data. Updation and maintenance of electronic /physical store record like on-off register/loan register/tool register etc Storage of items as recommended by regulatory authority, mentioned in MOE/EPM and any other relevant documents. To ensure that no item is kept in store without proper tag/life. Maintenance of stores as per regulatory requirement. Maintaining temperature and humidity as per the requirement specified. Issue of items to users after verification of proper authorization. Follow up with Engineering for return of defective components/unserviceable components. Regular verification of asset/ stock with respect to ERP system. Monitoring of shelf life / storage life /calibration period. Stock Transfer to other location on receipt of the request and follow up till item get transferred in to that location. Keep track of hold unserviceable items. Review daily the line station requirements and cater to the needs with proper documentation. Ensure a proper follow up for import/export of aircraft spares, consumables etc. coordinate with freight forwarders clearing agencies as required. Reporting of safety related issues to Manager Stores for necessary corrective and preventive action Any other tasks delegated by Manager-Stores Logistics

call or whatsapp on 8801551515 We are looking for a Helicopter Acquisition Specialist to secure a one-year lease or rental agreement for a helicopter from helicopter owners, operators, and leasing companies. Engage directly with helicopter owners Required Candidate profile Established network of contacts within the helicopter industry, particularly with helicopter owners and operators. Excellent negotiation, communication, and interpersonal skills.

Job Title Aerospace Engineer Responsibilities A day in the life of an Infoscion As part of the Infosys delivery team, your primary role would be to interface with the client for quality assurance, issue resolution and ensuring high customer satisfaction. You will understand requirements, create and review designs, validate the architecture and ensure high levels of service offerings to clients in the technology domain. You will participate in project estimation, provide inputs for solution delivery, conduct technical risk planning, perform code reviews and unit test plan reviews. You will lead and guide your teams towards developing optimized high quality code deliverables, continual knowledge management and adherence to the organizational guidelines and processes. You would be a key contributor to building efficient programs/ systems and if you think you fit right in to help our clients navigate their next in their digital transformation journey, this is the place for you!If you think you fit right in to help our clients navigate their next in their digital transformation journey, this is the place for you! Technical and Professional Requirements: Primary Skills Aerospace Domain, Aerospace Domain-Aircraft Maintenance, Embedded Software-Control Systems & Acquisition SystemsSecondary Skills Aero Engine Design, Aero Engine Stress, CFD, UGNX Preferred Skills: Domain->Aerospace->Airframe Domain->Aerospace->Interiors/Exteriors Domain->Aerospace->MRO Domain->Aerospace->Space Technologies Educational Requirements Master Of Comp. Applications,Master Of Engineering,Master Of Science,Master Of Technology,Bachelor Of Comp. Applications,Bachelor Of Science,Bachelor of Engineering,Bachelor Of Technology Service Line Engineering Services * Location of posting is subject to business requirements

Job Description Position: Aircraft Maintenance Engineer [B1.2 (Cessna 172 Tecnam) B3] Job Location: Bhiwani Narnaul Key Responsibilities: For any defect rectification carried out during aircraft maintenance, is carried out to the design and quality standards specified in this Part of CAR. For ensuring that all maintenance required to be carried out as per approved standard For any corrective action resulting from the M.A.616 organizational review. Establishment of MOM and its amendment. Responsible for the maintenance management of assigned aircrafts. Ensuring airworthiness as defined within CAR by researching permanent records, maintenance tracking program. Familiar working knowledge of DGCA- CAR, industry best practices. Complies with internal club policies and procedures outlined within the General Maintenance Manual (GMM), Maintenance Procedures Manual (MPM) or any club Standard Operating Procedures (SOP) document. Communicates effectively and accurately with the client, vendors and other internal departments. Maintains a safe work environment and reports any unsafe conditions. Performs quality maintenance, preventive maintenance and inspections to conform within the standards established by the club, Federal regulation and industry best practices achieving the highest reliability goals. Troubleshoots reported discrepancies and handles complex technical challenges. Provides technical support, as needed, in support of assigned aircraft. Reviews and ensures all required entries into the aircraft logbooks and permanent records are accurate and preserved in accordance with club and DGCA requirements. Assist in Procurement of parts and materials. Proactively provides recommendations for modifications and upgrades, as necessary. Preparation of an annual maintenance budget for assigned aircraft. Maintains a purchase order log for all expenditures on assigned aircraft. Other duties may be assigned, as needed Requirement and Skills: Aircraft Maintenance Engineering with minimum 1-3 years of experience. Must have previous experience in FTO (Flight Training Organization) Cat. B1. 2 ( Cessna 172) , B3 (metal composite) will be preffered. Should have Endorsement on Technam P-2008JC P-2006T Cessna 152 172 Technam P-2008JC P-2006T Cessna 152 172 Open rated candidate will be preferred Remuneration: Salary is negotiable and will be commensurate to qualification, educational background and experience.

Create and update technical publications, adhering to S1000D specifications and standards. Creating and managing IETMs for aerospace, defense, or related domains. Basic understanding of S1000D, XML, STE-100, and technical publication processes.

Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : Aircraft Structural Analysis Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : BE Summary :As an Aircraft Structural Analysis Engineer, you will be responsible for providing end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Your typical day will involve working across structural and stress design, qualification, configuration, and technical management. Roles & Responsibilities: Perform structural analysis of aircraft components and systems using finite element analysis (FEA) tools. Develop and validate stress analysis models for aircraft structures and components. Collaborate with cross-functional teams to ensure that designs meet technical requirements and are optimized for weight, cost, and performance. Provide technical guidance and mentorship to junior engineers and designers. Conduct design reviews and participate in the development of design standards and best practices. Professional & Technical Skills: Must To Have Skills:Strong knowledge of aircraft structural analysis principles and techniques. Good To Have Skills:Experience with FEA tools such as ANSYS or NASTRAN. Experience with aircraft design and certification processes. Proficiency in CAD software such as CATIA or SolidWorks. Strong understanding of materials science and mechanical engineering principles. Additional Information: The candidate should have a minimum of 10 years of experience in aircraft structural analysis. The ideal candidate will possess a strong educational background in mechanical engineering or a related field, along with a proven track record of delivering impactful engineering solutions. This position is based at our Bengaluru office. Qualification BE

Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : Aircraft Structural Analysis Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : BEMTech Mech or Aero Summary :As an Aircraft Structural Analysis Engineer, you will be responsible for providing end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Your typical day will involve working across structural and stress design, qualification, configuration, and technical management. Roles & Responsibilities:Structural Analysis and design validation Perform structural analysis of aircraft components and systems using finite element analysis (FEA) tools. Develop and validate stress analysis models for aircraft structures and components. Collaborate with cross-functional teams to ensure that designs meet technical requirements and are optimized for weight, cost, and performance. Provide technical guidance and mentorship to junior engineers and designers. Conduct design reviews and participate in the development of design standards and best practices. Professional & Technical Skills: Must To Have Skills:Proficiency in aircraft structural analysis using FEA tools. Good To Have Skills:Experience with aircraft design and certification processes. Strong understanding of stress analysis and fatigue analysis principles. Experience with CAD software such as CATIA or SolidWorks. Experience with aerospace materials and manufacturing processes. Additional Information: The candidate should have a minimum of 5 years of experience in aircraft structural analysis. The ideal candidate will possess a strong educational background in aerospace engineering or a related field, along with a proven track record of delivering impactful solutions. This position is based at our Bengaluru office. Qualification BEMTech Mech or Aero

Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : Aircraft Maintenance Manual Authoring Guidelines Good to have skills : NA Minimum 2 year(s) of experience is required Educational Qualification : BE Mechanical Aero or AME Mechanical Avionics What you would do in this role Take end-to-end responsibility for timely delivery of work orders. Analyze source data available to create technical documentation, request additional source from clients whenever needed. Quality control for the created/Revised technical documents. Creation and revision of AMM using standards like Ispec2200, S1000D. Preparation of supporting Documents like Lessons learnt, RCA, Enhancement trainings and etc. Mentoring the team. Coordination calls with onsite coordinator and customer. Who are we looking for? Overall experience of at least 2 to 5 years. Experience in the field of Aircraft maintenance will be an advantage Experienced in creation and revision of AMM Should have knowledge of aerospace tech data process Tools knowledge GIPSY/GIDOCA/ZAMIZ/IMS/DACAS, will be an added advantage. Knowledge on ATA25 would be an added advantageShould be able to understand and use ASD-STE Excellent understanding of ATA iSpec 2200 and S1000D standards Analyzing and interpretation of engineering drawings and reports Should have Aircraft and systems knowledge. Excellent Written and Verbal Communication Skills Should be a strong team player. Qualification BE Mechanical Aero or AME Mechanical Avionics

The AME must ensure that his AME license/ Authorisation is current and valid on the type of aircraft/engine/systems to be certified by him To carry out the inspection and certification of work pertaining to the maintenance of airframe and power plant systems and components within the scope of his Licence/ Authorisation To ensure that all work performed in connection with maintenance is in accordance with the requirements/recommendations of the manufacturers It should also be ensured the approved methods, tooling, procedures and materials are used in carrying out the said work To ensure all work orders, inspection schedules, are properly completed & certified before issuing CRS To ensure the snags observed during inspections and those reported by the flight crew during the flight are rectified in an approved method Major defects and rectifications are promptly reported and dealt with To ensure that tools and equipment used during maintenance are calibrated and in serviceable condition, and are not mishandled during use To ensure that only approved materials and parts are used and the approved spares have necessary documentation and certification before installation on the aircraft To ensure while handling equipment(s), tools and carrying out any servicing of aircraft or components etc necessary caution and safety procedures are to be followed Report to MCC/ Shift-Incharge whenever any defect is reported by flight crew/observed Mentor technicians Ensure that they have read the QAN, GIC & other Technical instructions issued from time to time To maintain discipline and clear environment at work place Should be in full uniform & Presentable as per company guidelines at all times while on duty Ensure implementation of Safety Policy and safety management system within indigo engineering Other duties as assigned by Manager Line Maintenance Be aware of and comply with his / her safety responsibilities and accountabilities as laid down in the IndiGo SMS Manual, Chapter Safety Policy and Objectives

We are looking for candidates having experience in Project management - Aviation/MRO (Maintenance, Repair & Overhaul) operations for our Bangalore Location. Work Location : Bangalore (Electronic City) Objectives The candidate will be responsible for project management aspects of the Maintenance, Repair, and Overhaul operations. The role will: 1. Require the personnel to plan, finalize & execute project as per strict deadlines and within budgets in accordance with new project Management processes. 2. Include interaction with operation, support functions and customer to coordinate all pre-production and production activities as per the integrated master schedule. 3. Also include continuous monitoring of cost, schedule and Quality using various plan vs. actual metrics which may require rescheduling and agreement with all stakeholders. Major Deliverables 1. Ensure flow down of all project related technical and contractual data from customer and Business Development such as Scope of Work (SoW), Quality requirement/ Quality plan, Purchase terms & Agreements to all stakeholders and provide feedback regarding inconsistencies/ additional requirements for completeness. 2. Plan the project along with operations team in terms of man, material, machinery and also finalize annual operating plans along with Finance. 3. Plan the project by taking into consideration time, team, activities, and financials by using suitable Project management tools such as gate transition, project directives, operating review rhythm, Management Information Systems etc. Plan and schedule project timelines and top milestones using appropriate tools and track them 4. Define project success criteria. Monitor & manage changes in project scope, identify potential crises and devise contingency plans; Contract review; Negotiate with vendors Check, measure, monitor, Review project progress - Adjust project plans, and inform the project team and others. Essential Attributes Knowledge of Project Management processes like gate transition, project directives, PMRs, Risk management Knowledge of financials such as understanding business cases, AOP, invoicing, MIS, etc. Knowledge of SAP on overall structure and modules like sales order, PR, PO etc.

Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : Aircraft Manufacturing Good to have skills : NA Educational Qualification : BE Mechanical or Aeronautical Engineering Project Role :Engineering Services Practitioner Project Role Description :Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have Skills :Aircraft ManufacturingGood to Have Skills : Job Requirements :Key Responsibilities :Assist in the development of technical engineering solutions to solve problems and achieve business objectives in the field of Aircraft Manufacturing.- Solve engineering problems using scientific, socio-economic, technical knowledge, and practical experience.- Work across structural and stress design, qualification, configuration, and technical management in the field of Aircraft Manufacturing.- Collaborate with cross-functional teams to ensure successful project delivery and implementation. Technical Experience :Must To Have Skills:Experience in Aircraft Manufacturing.- Good To Have Skills:Knowledge of structural and stress design, qualification, configuration, and technical management.- Strong understanding of scientific, socio-economic, and technical knowledge.- Experience in solving engineering problems using practical experience.- Experience in collaborating with cross-functional teams to ensure successful project delivery and implementation. Professional Attributes :5 to 9 experience in designing and developing wiring harnesses.The ideal candidate will possess a strong educational background in electrical engineering or a related field, along with a proven track record of delivering impactful engineering solutions. Educational Qualification:BE Mechanical or Aeronautical Engineering Additional Information :IX_CE_AE_ME Qualifications BE Mechanical or Aeronautical Engineering

Role & responsibilities Issue Work Orders & ensure that all maintenance is carried out on time and to approved standards. - Establishment and development of continuing airworthiness policy, including the approval of the aircraft Maintenance Programmes required by CAR M.A.302. - Analysis of the effectiveness of the Aircraft Maintenance Programme as required by CAR M.A.708(b) & Appendix 1 to AMC M.A.302. - Ensuring that necessary corrective/ improvement action is taken as a follow up to the audit/ inspection by the Quality Department under Quality Manager. - Ensuring that owner /operators technical records are kept as required by CAR M.A.305. - Ensuring the validity of ARC. - Establishing work planning section and ensuring implementation and follow up. - Establishing technical section and ensuring implementation and follow up. - Ensuring that modifications and repairs (changes) are carried out to an approved standard - Review of Airworthiness Directive status and ensure embodiment. - Reporting any occurrences to DGCA and the aircraft manufacturers. - Ensuring that all defects discovered during scheduled maintenance or reported are corrected by an appropriately approved maintenance organisation. - Ensuring that the mass and balance statement reflects the current status of the aircraft. - Ensuring that all continuing airworthiness documentation is used properly and accordingly. - Monitoring of all aircraft log books. - Ensure that all required maintenance data to manage the Continuing Airworthiness functions are available and revision status is up to date, at all times. - Following up of the maintenance activity till its completion and certification including issue of Certificate of Release to Service. Preferred candidate profile Well Experienced with all types of Aircrafts knowledge. Perks and benefits As per Industry

Senior Technical Author Chennai, Tamil Nadu, India Job Responsibilities: Technical author- Must have at least 8 years working experience in Aircraft Maintenance Manuals (AMM) tasks creation and revision preferably on Cabin and Systems ATA chapters. Have good understanding of the aircraft systems and components. Good understanding of aircraft maintenance procedures and documentation. Hands on experience on tools like SAP/GAMS, DACAS, A350 PC suite (PDM), Gipsy, Taksy, Epic Editor, Adobe Professional is an added advantage. Working Knowledge on TechPub Standards. (ATA, iSpec2200, S1000D) Strong Simplified English skills Will be involved in the creation/revision of A-350 AMM tasks based on the customer supplied inputs (MPMs, SBs, TRs etc.). Responsible to deliver the assigned tasks with quality and on time schedule compliance. Train and mentor new Resources. Make sure high Quality of deliverables and adherence to schedules. Experience in AMM creation / Revisions, Experience in Authoring / Proof Reading, and Quality Reviews. Soft Skills: Excellent skill requirement in Excel, Visio, PowerPoint, and MS word Good written and oral communication Strong teamwork skills. Technical Skills: Minimum 8yrs of working experience on Airbus manuals (A-350, SA, LR, MB AMM) especially on the following - ATA 21, 30, 35, 38- GE Local Line ATA 25-23/24-GE Local Line Trouble Shooting manual experience is preferred Qualification: Any Graduates Qualification: BE / Diploma / AME

Entity:- Accenture Industry X Practice:- Aerospace Technical Publications. Title:- Engineering Services Associate 12 Role:- AMM-Author Qualifications:- BE- Mechanical/Aero or AME course (Mechanical) Job location:- Bangalore About Industry X:- Industry X combines Accenture's powerful digital capabilities with deep engineering and manufacturing expertise. We use the power of data and digital to help our clients reimagine the products they make, and how they make them. By connecting engineering and manufacturing operations every step of the way - from how products are designed and engineered, sourced and supplied, manufactured, to how they are serviced and renewed, we help them achieve greater productivity, drive growth and meet their sustainability commitments Know more:- www.youtube.com/watch?v=XaLxTEI3atI WHAT'S IN IT FOR YOU? Better carrier opportunity Opportunity to upgrade your soft skills through my Learning portal. What you would do in this role Take end-to-end responsibility for timely delivery of work orders. Analyze source data available to create technical documentation, request additional source from clients whenever needed. Quality control for the created/Revised technical documents. Creation and revision of AMM using standards like Ispec2200, S1000D. Preparation of supporting Documents like Lessons learnt, RCA, Enhancement trainings and etc. Qualification Who are we looking for? Fresher from BE in Aerospace, Mechanical or relevant subject like AME Mechanical. Experience in the field of Aircraft maintenance will be an advantage. Should have knowledge of aerospace tech data process. Strong knowledge about aircraft system, aerospace tech data process and airworthiness. Basic knowledge about aircraft manuals like AIPC/AMM/CMM/SRM. Ability to work with illustration team and raise Illustration mock ups with engineering drawings. Tools knowledge GIPSY/GIDOCA/AIRINA/IMS/DACAS, will be an added advantage. Should be able to understand and use ASD-STE Excellent understanding of ATA iSpec 2200 and S1000D standards Analyzing and interpretation of engineering drawings and reports Supporting continuous improvement initiatives to increase team efficiency. Excellent Written and Verbal Communication Skills Should be a strong team player and Proactiveness and willingness to take additional responsibility. Accenture is an equal opportunities employer and welcomes applications from all sections of society and does not discriminate on grounds of race, religion or belief, ethnic or national origin, disability, age, citizenship, marital, domestic or civil partnership status, sexual orientation, gender identity, or any other basis as protected by applicable law.

Entity:- Accenture Industry X Practice:- Aerospace Technical Publications. Title:- Engineering Services Associate 12 Role:- AMM-Author Qualifications:- BE- Mechanical/Aero or AME course (Mechanical) Job location:- Bangalore About Industry X:- Industry X combines Accenture's powerful digital capabilities with deep engineering and manufacturing expertise. We use the power of data and digital to help our clients reimagine the products they make, and how they make them. By connecting engineering and manufacturing operations every step of the way - from how products are designed and engineered, sourced and supplied, manufactured, to how they are serviced and renewed, we help them achieve greater productivity, drive growth and meet their sustainability commitments Know more:- www.youtube.com/watch?v=XaLxTEI3atI WHAT'S IN IT FOR YOU? Better carrier opportunity Opportunity to upgrade your soft skills through my Learning portal. What you would do in this role Take end-to-end responsibility for timely delivery of work orders. Analyze source data available to create technical documentation, request additional source from clients whenever needed. Quality control for the created/Revised technical documents. Creation and revision of AMM using standards like Ispec2200, S1000D. Preparation of supporting Documents like Lessons learnt, RCA, Enhancement trainings and etc. Qualification Who are we looking for? Fresher from BE in Aerospace, Mechanical or relevant subject like AME Mechanical. Experience in the field of Aircraft maintenance will be an advantage. Should have knowledge of aerospace tech data process. Strong knowledge about aircraft system, aerospace tech data process and airworthiness. Basic knowledge about aircraft manuals like AIPC/AMM/CMM/SRM. Ability to work with illustration team and raise Illustration mock ups with engineering drawings. Tools knowledge GIPSY/GIDOCA/AIRINA/IMS/DACAS, will be an added advantage. Should be able to understand and use ASD-STE Excellent understanding of ATA iSpec 2200 and S1000D standards Analyzing and interpretation of engineering drawings and reports Supporting continuous improvement initiatives to increase team efficiency. Excellent Written and Verbal Communication Skills Should be a strong team player and Proactiveness and willingness to take additional responsibility. Accenture is an equal opportunities employer and welcomes applications from all sections of society and does not discriminate on grounds of race, religion or belief, ethnic or national origin, disability, age, citizenship, marital, domestic or civil partnership status, sexual orientation, gender identity, or any other basis as protected by applicable law.

Entity:- Accenture Industry X Practice:- Aerospace Technical Publications. Title:- Engineering Services Associate 12 Role:- AMM-Author Qualifications:- BE- Mechanical/Aero or AME course (Mechanical) Job location:- Bangalore About Industry X:- Industry X combines Accenture's powerful digital capabilities with deep engineering and manufacturing expertise. We use the power of data and digital to help our clients reimagine the products they make, and how they make them. By connecting engineering and manufacturing operations every step of the way - from how products are designed and engineered, sourced and supplied, manufactured, to how they are serviced and renewed, we help them achieve greater productivity, drive growth and meet their sustainability commitments Know more:- www.youtube.com/watch?v=XaLxTEI3atI WHAT'S IN IT FOR YOU? Better carrier opportunity Opportunity to upgrade your soft skills through my Learning portal. What you would do in this role Take end-to-end responsibility for timely delivery of work orders. Analyze source data available to create technical documentation, request additional source from clients whenever needed. Quality control for the created/Revised technical documents. Creation and revision of AMM using standards like Ispec2200, S1000D. Preparation of supporting Documents like Lessons learnt, RCA, Enhancement trainings and etc. Qualification Who are we looking for? Fresher from BE in Aerospace, Mechanical or relevant subject like AME Mechanical. Experience in the field of Aircraft maintenance will be an advantage. Should have knowledge of aerospace tech data process. Strong knowledge about aircraft system, aerospace tech data process and airworthiness. Basic knowledge about aircraft manuals like AIPC/AMM/CMM/SRM. Ability to work with illustration team and raise Illustration mock ups with engineering drawings. Tools knowledge GIPSY/GIDOCA/AIRINA/IMS/DACAS, will be an added advantage. Should be able to understand and use ASD-STE Excellent understanding of ATA iSpec 2200 and S1000D standards Analyzing and interpretation of engineering drawings and reports Supporting continuous improvement initiatives to increase team efficiency. Excellent Written and Verbal Communication Skills Should be a strong team player and Proactiveness and willingness to take additional responsibility. Accenture is an equal opportunities employer and welcomes applications from all sections of society and does not discriminate on grounds of race, religion or belief, ethnic or national origin, disability, age, citizenship, marital, domestic or civil partnership status, sexual orientation, gender identity, or any other basis as protected by applicable law.

Entity:- Accenture Industry X Practice:- Technical Publication Title:- Engineering Services Analyst 11 Role:- AMM-Author Job location:- Bangalore About Industry X:- Industry X combines Accenture's powerful digital capabilities with deep engineering and manufacturing expertise. We use the power of data and digital to help our clients reimagine the products they make, and how they make them. By connecting engineering and manufacturing operations every step of the way - from how products are designed and engineered, sourced, and supplied, manufactured, to how they are serviced and renewed, we help them achieve greater productivity, drive growth and meet their sustainability commitments. Know more:- www.youtube.com/watch?v=XaLxTEI3atI What you would do in this role Analyze source data available to create technical documentation, request additional source from clients whenever needed. Quality control for the created/Revised technical documents. Creation and revision of AMM using standards like Ispec2200, S1000D. Preparation of supporting Documents like Lessons learnt, RCA, Enhancement trainings etc. Mentoring the team. Coordination calls with onsite coordinator and customer. Who are we looking for? Overall experience of at least 2+ years. Experience in the field of Aircraft maintenance will be an advantage. Experienced in creation and revision of AMM. Should have knowledge of aerospace tech data process. Airbus Tools knowledge GIPSY/GIDOCA/ZAMIZ/IMS/DACAS, will be an added advantage. Knowledge on ATA25 would be an added advantage. Should be able to understand and use ASD-STE Excellent understanding of ATA iSpec 2200 and S1000D standards Analyzing and interpretation of engineering drawings and reports Should have Aircraft and systems knowledge. Excellent Written and Verbal Communication Skills Should be a strong team player. Accenture is an equal opportunities employer and welcomes applications from all sections of society and does not discriminate on grounds of race, religion, or belief, ethnic or national origin, disability, age, citizenship, marital, domestic, or civil partnership status, sexual orientation, gender identity, or any other basis as protected by applicable law. Qualification NA

Entity:- Accenture Industry X Practice:- Aerospace Technical Publications. Title:- Engineering Services Associate 12 Role:- AMM-Author Qualifications:- BE- Mechanical/Aero or AME course (Mechanical) Job location:- Bangalore About Industry X:- Industry X combines Accenture's powerful digital capabilities with deep engineering and manufacturing expertise. We use the power of data and digital to help our clients reimagine the products they make, and how they make them. By connecting engineering and manufacturing operations every step of the way - from how products are designed and engineered, sourced and supplied, manufactured, to how they are serviced and renewed, we help them achieve greater productivity, drive growth and meet their sustainability commitments Know more:- www.youtube.com/watch?v=XaLxTEI3atI WHAT'S IN IT FOR YOU? Better carrier opportunity Opportunity to upgrade your soft skills through my Learning portal. What you would do in this role Take end-to-end responsibility for timely delivery of work orders. Analyze source data available to create technical documentation, request additional source from clients whenever needed. Quality control for the created/Revised technical documents. Creation and revision of AMM using standards like Ispec2200, S1000D. Preparation of supporting Documents like Lessons learnt, RCA, Enhancement trainings and etc. Qualification Who are we looking for? Fresher from BE in Aerospace, Mechanical or relevant subject like AME Mechanical. Experience in the field of Aircraft maintenance will be an advantage. Should have knowledge of aerospace tech data process. Strong knowledge about aircraft system, aerospace tech data process and airworthiness. Basic knowledge about aircraft manuals like AIPC/AMM/CMM/SRM. Ability to work with illustration team and raise Illustration mock ups with engineering drawings. Tools knowledge GIPSY/GIDOCA/AIRINA/IMS/DACAS, will be an added advantage. Should be able to understand and use ASD-STE Excellent understanding of ATA iSpec 2200 and S1000D standards Analyzing and interpretation of engineering drawings and reports Supporting continuous improvement initiatives to increase team efficiency. Excellent Written and Verbal Communication Skills Should be a strong team player and Proactiveness and willingness to take additional responsibility. Accenture is an equal opportunities employer and welcomes applications from all sections of society and does not discriminate on grounds of race, religion or belief, ethnic or national origin, disability, age, citizenship, marital, domestic or civil partnership status, sexual orientation, gender identity, or any other basis as protected by applicable law.