113 Aircraft Maintenance Jobs - Page 2

Responsibilities & Key Deliverables The Quality Manager is the nominated post-holder responsible for the management and supervision of continuing airworthiness activities sub-contracted by the Helicopter / Aircraft owner/operator. The individual will report to the Accountable Manager of owner / operator and will be the functional manager for all Engineering activities in the approved site. Job description of Quality Manager is responsible for monitoring compliance with regulatory requirements and quality standards of the following functions and monitoring of Airworthiness Review of fleet aircraft:- Quality monitoring of the areas of CAMO, contracted maintenance, sub-contracted activities for compliance with CAR M. The Engineering Training KEY RESPONSIBILITIES OF THE JOB Establishing a Quality Monitoring Programme which addresses all of the areas of Mahindra Airways Limited s contracted maintenance support and all tasks carried out by the CAMO. Establishing Quality & Safety policies and standards for the Engineering Maintenance Operations, in line with the DGCA regulations and company objectives. Establish effective audit system to confirm adherence to company policies and procedures by all Department and personnel, while engaged in continuing airworthiness functions. Identify the deficiencies, related root cause and the corrective actions necessary for eliminating non-compliances and to ensure that these corrective actions are initiated and completed in such a way that they ll meet their intended purpose. Establish effective Airworthiness Review process. Consult and liaise with the Regulatory Authorities and higher management on Regulatory compliance, Organization approvals, Policies, Procedures etc. Occurrence reporting to the DGCA in the form and manners required by DGCA. Perform technical investigation of incident /accident in liaison with the Head- Flight Safety Department and Regulatory authorities. Apprise the Accountable Manager periodically on any issues related with flight safety, airworthiness and company s compliance with regulatory requirements. Approve internal procedures, Department Manuals and verify that these do not conflict with the current applicable regulatory requirements. Approval of aircraft maintenance program amendment, wherever applicable. Evaluate and approve the contracted & subcontracted maintenance agencies. Monitoring and auditing of all sub-contracted activities. Monitoring compliance with CAR M and other applicable CAR s. Responsible for annual budgeting for the department and managing the costs within allocated budgets. Establish and monitor KPI s and goals for the department. Ensure submission of reports & returns to the management as per the laid down time frame. Promote and cultivate a working culture in the department, which is striving and conducive for high standards of quality, productivity, safety, cleanliness, teamwork and workmanship. Preferred exposure - Airlines / General Aviation / Maintenance, Repairs & Overhaul Organisations. Key Challenges: Audit Decision Making Authority (Describes the type of decisions made alone, those on which the manager must be consulted, those referred to a higher level, and job procedures to be followed) Experience 10 years of aviation work experience of which at least 2 years covering an appropriate combination of experience airworthiness management (engineering) and / or surveillance of such task(s) (Quality or Quality Assurance) in an airline and CAR 145 origination. Preferably worked in the technical services or Planning or Quality department of any General Aviation Engineering department Qualifications Degree or Diploma in Aeronautical Engineering Skills/ Special Requirements Computer proficiency Sound knowledge of Aircraft / Helicopter maintenance activities Good understanding on Part M Subparts G requirements, experience with CAMO functions. Proficient in maintenance management software and Microsoft office programs. Good knowledge of the airline maintenance and engineering processes and procedures

This is a full-time on-site role for a Licensed Technician at International MRO in Hong Kong. As a Licensed Technician, you will be responsible for performing maintenance, repairs, and inspections on aircraft to ensure airworthiness and safety standards are met on a daily basis. Qualifications: - Hold a valid AME license/BAMEC/BAMEL. - Demonstrated experience in aircraft maintenance and troubleshooting. - Proficiency in reading and interpreting technical manuals and drawings. - Strong attention to detail and adherence to safety protocols. - Excellent communication and teamwork skills. - Ability to work well under pressure and in a fast-paced environment.,

Looking for challenging role If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. (Role & Responsibility): Carry out preliminary and detailed aerodynamic design activity using 1D, 2D design and analysis tools, and using both steady-state and unsteady CFD simulation. Further develop our aero’ design and optimization toolkit, using coding and Machine Learning. Additional Responsibilities (as plus): Help define engine and rig compressor test programmes in support of new product development projects. Carry-out pre and post engine test analyses. Use analysis tools and test data to predict Compressor Blade aero-mechanical vibration behaviour. Provide support to fault finding and root cause investigation activity. Qualification & Experience required: Postgraduate in Mechanical / Aerospace Engineering with specialization in Aerodynamics, CFD or a related technical discipline. Experience within power, propulsion or aerospace engineering would be preferable. Knowledge of axial compressor design principles and operation. Some experience in use of CFD tools to carry out meshing and solving. Experience in use of Coding eg. Python, Git or other.

DET (Diploma Engineer Trainee) M/F - India, Hyderabad - 160451 | Safran DET (Diploma Engineer Trainee) M/F 07.09.2025 Safran Aircraft Engines Services Spoken language(s) : Job Description Assist in the inspection, repair, and overhaul of aviation components, including engines, airframes, avionics, landing gear, and other critical systems. Support the troubleshooting and diagnosis of mechanical, electrical, and avionics issues in aircraft and components. Assist in performing scheduled maintenance tasks, including routine checks, inspections, and repairs. Participate in disassembly, cleaning, inspection, and reassembly of components according to company and industry standards. Work with senior engineers and technicians to ensure compliance with maintenance manuals, regulatory standards, and safety protocols. Prepare and maintain technical documentation, including work orders, inspection reports, and maintenance logs. Assist in the development and implementation of procedures for component repair and testing. Participate in testing repaired or overhauled components to ensure they meet required specifications. Follow all safety and quality control procedures, ensuring that all repairs are done to the highest standards. Gain hands-on experience in working with advanced MRO tools, equipment, and diagnostic software. Job Requirements o Basic knowledge of aircraft systems, components, and repair practices. o Familiarity with tools and equipment used in aircraft maintenance and repair is a plus. o Understanding of maintenance manuals, service bulletins, and technical documentation. o Strong analytical and troubleshooting skills. o Ability to work in a team environment and collaborate with other departments. o good understanding of safety and quality control procedures in MRO operations. o Strong communication skills, both written and verbal. Company Information Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Safran is in the 2nd place in the aerospace and defense industry in TIME magazines "Worlds best companies 2024" ranking. Safran Aircraft Engines designs, produces and sells, alone or in partnership, commercial and military aircraft engines offering world-class performance, reliability and environmental compliance. Through CFM International*, Safran Aircraft Engines is the worlds leading supplier of engines for single-aisle mainline commercial jets. * CFM International is a 50/50 joint venture between Safran Aircraft Engines and GE Aerospace Number of countries where Safran is located

About The Role Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : Aircraft Interior Design Good to have skills : NAMinimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Engineering Services Practitioner, you will assist with end-to-end engineering services to develop technical engineering solutions that address complex challenges and meet business objectives for design and development of aircraft cabin interiors. Your typical day will involve collaborating with cross- functional teams, applying technical knowledge, and leveraging practical experience to solve engineering problems effectively. You will engage in various aspects of aircraft cabin design, digital mockups, qualification, configuration, and technical management, ensuring that all solutions are aligned with organizational goals and industry standards. Roles & Responsibilities:- Design and develop aircraft cabin interior components, assemblies, and sub-assemblies.- Conduct feasibility studies and perform analytical evaluations to optimize designs.- Manage and manipulate digital mockups to validate designs and ensure fit and function.- Apply knowledge of aircraft cabins interior, installations, and aerospace materials to design solutions.- Participate in all phases of the product design lifecycle, from concept development to production.- Maintain accurate design documentation and ensure compliance with industry standards.- Participation/contribution in team discussions and developments.- Collaborate with team members to brainstorm innovative solutions for engineering challenges.- Engage in continuous learning to stay updated with the latest engineering practices and technologies. Professional & Technical Skills: - Must Have Skills: Proficiency in 3D Designing.- Strong understanding of Aircraft Cabins interior and manufacturing processes.- Experience with Catia, Airbus PLM tools like VPM or similar.- Ability to interpret technical drawings and specifications.- Familiarity with Airbus Cabin design standards.- Excellent analytical thinking and problem-solving skills.- Strong communication and collaboration abilities. Additional Information:- The candidate should have a minimum of 5 years of experience in 3D Designing & Catia.- This position requires to work from office and is based at Bengaluru.- A 15 years full time education is required. Qualification 15 years full time education

About The Role Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : 3D Designing Good to have skills : NAMinimum 2 year(s) of experience is required Educational Qualification : 15 years full time educationBTech or Mtech in Aeronautical Engineering Summary :As an Engineering Services Practitioner, you will assist with end-to-end engineering services to develop technical engineering solutions that address complex challenges and meet business objectives for design and development of aircraft cabin interiors. Your typical day will involve collaborating with cross-functional teams, applying technical knowledge, and leveraging practical experience to solve engineering problems effectively. You will engage in various aspects of aircraft cabin design, digital mockups, qualification, configuration, and technical management, ensuring that all solutions are aligned with organizational goals and industry standards. Roles & Responsibilities:- Design and develop aircraft cabin interior components, assemblies, and sub-assemblies.- Conduct feasibility studies and perform analytical evaluations to optimize designs.- Manage and manipulate digital mockups to validate designs and ensure fit and function.- Apply knowledge of aircraft cabins, installations, and aerospace materials to design solutions.- Participate in all phases of the product design lifecycle, from concept development to production.- Maintain accurate design documentation and ensure compliance with industry standards.- Participation/contribution in team discussions and developments.- Collaborate with team members to brainstorm innovative solutions for engineering challenges.- Engage in continuous learning to stay updated with the latest engineering practices and technologies. Professional & Technical Skills: - Must Have Skills: Proficiency in 3D Designing.- Strong understanding of Aircraft Cabins and manufacturing processes.- Experience with Catia, Airbus PLM tools like VPM or similar.- Ability to interpret technical drawings and specifications.- Familiarity with Airbus design standards.- Excellent analytical thinking and problem-solving skills.- Strong communication and collaboration abilities. Additional Information:- The candidate should have minimum 2 years of experience in 3D Designing & Catia.- This position is based at our Bengaluru office.- A Bachelors or masters degree in Aeronautical Engineering is required. Qualification 15 years full time educationBTech or Mtech in Aeronautical Engineering

About The Role Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : Aircraft Interior Design Good to have skills : NAMinimum 2 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Engineering Services Practitioner, you will assist with end-to-end engineering services to develop technical engineering solutions that address complex challenges and meet business objectives for design and development of aircraft cabin interiors. Your typical day will involve collaborating with cross- functional teams, applying technical knowledge, and leveraging practical experience to solve engineering problems effectively. You will engage in various aspects of aircraft cabin design, digital mockups, qualification, configuration, and technical management, ensuring that all solutions are aligned with organizational goals and industry standards. Roles & Responsibilities:- Design and develop aircraft cabin interior components, assemblies, and sub-assemblies.- Conduct feasibility studies and perform analytical evaluations to optimize designs.- Manage and manipulate digital mockups to validate designs and ensure fit and function.- Apply knowledge of aircraft cabins interior, installations, and aerospace materials to design solutions.- Participate in all phases of the product design lifecycle, from concept development to production.- Maintain accurate design documentation and ensure compliance with industry standards.- Participation/contribution in team discussions and developments.- Collaborate with team members to brainstorm innovative solutions for engineering challenges.- Engage in continuous learning to stay updated with the latest engineering practices and technologies. Professional & Technical Skills: - Must Have Skills: Proficiency in 3D Designing.- Strong understanding of Aircraft Cabins interior and manufacturing processes.- Experience with Catia, Airbus PLM tools like VPM or similar.- Ability to interpret technical drawings and specifications.- Familiarity with Airbus Cabin design standards.- Excellent analytical thinking and problem-solving skills.- Strong communication and collaboration abilities. Additional Information:- The candidate should have a minimum of 2 years of experience in 3D Designing & Catia.- This position requires to work from office and is based at Bengaluru.- A 15 years full time education is required. Qualification 15 years full time education

About The Role Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : 3D Designing Good to have skills : NAMinimum 2 year(s) of experience is required Educational Qualification : 15 years full time educationA Bachelors or masters degree in Aeronautical Engineering is required Summary :As an Engineering Services Practitioner, you will assist with end-to-end engineering services to develop technical engineering solutions that address complex challenges and meet business objectives for design and development of aircraft cabin interiors. Your typical day will involve collaborating with cross-functional teams, applying technical knowledge, and leveraging practical experience to solve engineering problems effectively. You will engage in various aspects of aircraft cabin design, digital mockups, qualification, configuration, and technical management, ensuring that all solutions are aligned with organizational goals and industry standards. Roles & Responsibilities:- Design and develop aircraft cabin interior components, assemblies, and sub-assemblies.- Conduct feasibility studies and perform analytical evaluations to optimize designs.- Manage and manipulate digital mockups to validate designs and ensure fit and function.- Apply knowledge of aircraft cabins, installations, and aerospace materials to design solutions.- Participate in all phases of the product design lifecycle, from concept development to production.- Maintain accurate design documentation and ensure compliance with industry standards.- Participation/contribution in team discussions and developments.- Collaborate with team members to brainstorm innovative solutions for engineering challenges.- Engage in continuous learning to stay updated with the latest engineering practices and technologies. Professional & Technical Skills: - Must Have Skills: Proficiency in 3D Designing.- Strong understanding of Aircraft Cabins and manufacturing processes.- Experience with Catia, Airbus PLM tools like VPM or similar.- Ability to interpret technical drawings and specifications.- Familiarity with Airbus design standards.- Excellent analytical thinking and problem-solving skills.- Strong communication and collaboration abilities. Additional Information:- The candidate should have minimum 2 years of experience in 3D Designing & Catia.- This position is based at our Bengaluru office.- A Bachelors or masters degree in Aeronautical Engineering is required. Qualification 15 years full time educationA Bachelors or masters degree in Aeronautical Engineering is required

Develop and implement a maintenance program under Air India s Car 145 for the FTO fleet, ensure compliance with all regulatory requirements, airline and industry best practices Develop and maintain a comprehensive maintenance program for all aircrafts and flight training devices, ensure maintenance and inspections, and tracking of maintenance records Develop and implement a stocking system and an ERP for optimal maintenance Sync with airline maintenance standards to improve operational efficiency Monitor the performance of the aircraft and equipment to identify potential issues and take corrective action as necessary Investigate and report on incidents and accidents related to aircraft maintenance and operation Implement policies and training to maintenance personnel on best practices for aircraft maintenance and safety Maintain accurate and up-to-date records of aircraft maintenance, inspections, and repairs

Position Title: Auditor Job Code TBD Grade: TBD Function: Engineering Location: Gurugram Reports to: Post Holder - Quality/ Quality Manager Role Level: TBD Job Purpose Responsible for conducting audits and assessments to evaluate the effectiveness of processes, compliance with aviation regulations, and adherence to quality standards across various departments within Air India, External MROs & Vendors to identify areas for improvement, ensuring compliance, and promoting a culture of quality and safety. B. Key Accountabilities Functional Activities Develop and execute comprehensive audit plans for various operational areas, including but not limited to safety, security, maintenance, finance, and quality management. Collaborate with stakeholders to ensure audits align with organizational goals and regulatory requirements. Identify and assess potential risks and control weaknesses within operational processes. Develop risk-based audit programs to address identified areas of concern. Conduct audits of operational processes to evaluate compliance with internal policies, industry regulations, and best practices. Assess the effectiveness of internal controls and recommend improvements where necessary. Ensure that operational activities adhere to aviation regulations, safety standards, and other relevant requirements. Stay updated on changes in regulations and communicate their implications to relevant stakeholders. Maintain detailed and accurate audit documentation. Prepare comprehensive audit reports outlining findings, recommendations, and corrective action plans. Present audit results to senior management and other stakeholders. Collaborate with departments to implement corrective actions resulting from audit findings. Promote a culture of continuous improvement by identifying opportunities for process enhancements. Evaluate the effectiveness of internal quality management systems. Monitor adherence to established standards and procedures. Collaborate with various departments to ensure a coordinated and cooperative approach to audit activities. Provide guidance and support to departments in addressing audit recommendations. Provide training to staff on audit processes, compliance requirements, and best practices. Foster awareness of the importance of internal controls and compliance within the organization. Any other additional responsibility could be assigned to the role holder from time to time as a standalone project or regular work. The same would be suitably represented in the Primary responsibilities and agreed between the incumbent, reporting officer and HR. C. Skills/Qualities Required Strong understanding of regulatory requirements Extensive compliance knowledge Strong quantitative skills Interpersonal Skills Attention to details & process Quality Management & Auditing Strong Leadership Skills Planning & coordination skills D. Key Performance Indicators Audit Performance Audit Cycle Time Audit Coverage Quality of Audit Reports Quality of Audit Findings and Recommendations Number of Regulatory Audits with No Major Findings Regulatory Compliance Regulatory Compliance Risk Identification and Mitigation Follow-up and Implementation Capacity Building and Training Training and Awareness Audit Team Collaboration, Knowledge Sharing, and Grooming of Team Members Operational Efficiency Continuous Improvement Initiatives Audit Budget Adherence Key Interfaces Internal Interfaces Internal Audit Team Collaboration with fellow auditors to share insights and coordinate audit activities. Participating in team meetings to discuss audit plans and findings. Department Heads and Managers Communicating with department heads to understand their processes and procedures. Providing feedback on audit findings and working together on implementing corrective actions. External Interfaces Regulatory Authorities Interacting with regulatory bodies to stay informed about changes in aviation regulations. Coordinating regulatory audits and addressing findings identified by regulatory authorities. E. Educational and Experience Requirements Minimum Education requirements An aircraft maintenance technician qualification Experience Minimum 2 years relevant work experience in an aviation industry of which minimum 1 year must be in quality department. Desired 5 years experience in application of aviation safety. Strong understanding of regulatory requirements of aircraft maintenance and management. Reviewed By Date Signature Approved By Date Signature

Job Purpose The Aircraft Maintenance Engineer will be responsible to ensure the ongoing maintenance of our aircraft fleet and sims at the FTO, in compliance with regulatory requirements and industry best practices. The AME will report to Maintenance Manager. Key Accountabilities Assist Maintenance Manager to develop and implement a maintenance program under Air India s Car 145 for the FTO fleet, ensure compliance with all regulatory requirements and industry best practices. Assist Maintenance Manager to develop and maintain a comprehensive maintenance program for all aircrafts and flight training devices, ensure maintenance and inspections, and tracking of maintenance records. Assist Maintenance Manager to develop and implement a stocking system and an ERP for optimal maintenance. Monitor the performance of the aircraft and equipment to identify potential issues and take corrective action, as necessary. Implement policies and training to maintenance personnel on best practices for aircraft maintenance and safety. Maintain accurate and up-to-date records of aircraft maintenance, inspections, and repairs. Any other additional responsibility could be assigned to the role holder from time to time as a standalone project or regular work. The same would be suitably represented in the Primary responsibilities and agreed between the incumbent, reporting officer and HR. Skills Required for the role. Strong Leadership Decision-making agility Strategic Planning Motivational Communication Skills Safety Commitment Interpersonal skills Adaptability Key Performance Indicators AOG time for aircrafts Utilization of aircrafts at FTO Inventory stocking practices Key Interfaces Internal Interfaces Internal Stakeholders Aviation Academy, Air India FTO team, Pilot Training units, Engineering, Training Support Staff, and Air India Management Team External Interfaces External Stakeholders Any FTO Partners, AI Cadets, Regulatory Authorities, Aircraft OEMs, MROs, equipment vendors Educational and Experience Requirements Minimum Desired Education requirements AME license in Category B1.2 or B3 in metal and composite category or B2 Bachelor s or Technical degree. Experience 5-10+ years experience in aircraft maintenance and airworthiness management Prior experience in DGCA-approved positions in FTOs/ATOs/Airlines in India Experience with single-and twin-engine fleet 10-15+ years experience in aircraft maintenance and airworthiness management Prior experience with similar fleet (Piper single-engine and Diamond multi-engine aircrafts) Location - Amrawati, Maharashtra

: 2025-06-30 Country: India Location: North Gate Business Park Sy.No 2/1, and Sy.No 2/2, KIAL Road, Venkatala Village, Chowdeshwari Layout, Yelahanka, Bangalore, Karnataka 560064 Position Role Type: Unspecified Overview: In this role, the Tech Pubs Engineer actively participate in a team environment, working with Authors and Illustrators in creating the various Tech Pubs documents with highest quality as per the ATA and S1000D requirements. Title: Senior Lead Engineer (Hybrid) Experience: 6-10 years Primary Responsibilities: Experience in Creation/revision of Component Maintenance Manuals (CMM), CMPs, Aircraft Maintenance Manuals (AMM) etc. for Aircraft Components and Systems. Strong working knowledge on Adobe Framemaker, Arbortext Epic Editor and Common Source Database (CSDB). Working knowledge on PLM tools like Teamcenter and Ennovia. Familiar with XML, SGML, and resolving the XML parsing errors. Strong knowledge of Technical Publications Aerospace Standards ATA100, ispec 2200 S100D. Experience in writing Assembly, Disassembly & Repair procedures. Working knowledge of illustration tools (Isodraw 7.3), 3DVIA and Catia will add advantage. Working Knowledge on Simplified English standard ASD-STE. Ability to understand and interpret engineering drawings and change drivers (Service Bulletin, Service Newsletter, ECN, TR, SIL, ATP etc.). Willingness to work in extremely tight schedules, while still not neglecting the value of attention to details and subsequently delivering high quality work. Must be ready for travel to abroad on need basis. Must be able to communicate effectively with internal /external customers. Basic Qualifications: 6 - 10 years of Industry experience with experience in Authoring of CMM, AMM Bachelors degree in Aerospace / Electronics / Mechanical Engineering with relevant experience in Mechanical / Aeronautical discipline. Collins Aerospace, a Raytheon Technologies company , is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers toughest challenges and to meet the demands of a rapidly evolving global market. The high-quality products we design, test and produce in our Advanced Structures business help millions of passengers reach their destinations safely - every day! From nacelles, landing systems, flight controls and actuation to propellers- the products we manufacture work together behind the scenes to enhance the overall flight experience. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement - we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable, and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us! WE ARE REDEFINING AEROSPACE. Some of our competitive benefits package includes: Transportation facility. Meal coupons Group Term Life Insurance. Group Health Insurance. Group Personal Accident Insurance. Entitled for 18 days of vacation and 12 days of sick leave annually. Employee scholar program Work life balance Car lease program National Pension Scheme LTA Fuel & Maintenance /Driver wages Meal vouchers And more! Nothing matters more to Collins Aerospace than our strong ethical and safety commitments. As such, all India positions require a background check, which may include a drug screen. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that s redefining aerospace, every day . Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description- Technical Officer - QATS ELIGIBILITY CRITERIA Educational Qualification - AME Diploma (Mandatory) Scores - Min. 60% in 10th, 12th and Graduation Work Experience -Relevant/ Total Years - 4-6 years in aviation; if the last employer is an unscheduled airline- 5-6 years of experience. IT skills - MS Office, excel Behavioural Competencies Collaborative approach, Good Interpersonal skills, commercial awareness, Time management JOB DESCRIPTION Daily Site Visit for ATR/AIRBUS/EASA/FAA/DGCA MAN MODS Documents. AMOS administration of Mod documents/DGCA Man Mods. Preparation of MCM Agenda. Preparation of Man Mod Status for Induction of New aircraft and further submission to DGCA. AMOS assignment for Induction of New aircraft. Preparation of Summary of Minor repairs (beyond SRM) for further submission to DGCA (ESR). Monitoring and updation of RDAS Monitoring Sheet for entire IGO Fleet. Preparation of Mod C-check package. Preparation of Mod-list for ARC. Work Order scrutiny of ATR MOD workorders and co-ordination with AMEs for corrections. Preparation of Listings (AD/SB/OCCM) and Re-Delivery bible for Lease return of aircraft. Review and preparation of Weight schedule for Induction and Re-weighing of aircraft. Monitoring and review of Production documents like Weighing report, EELC and LOPA for any changes and correctness. Post completion of C-check, review of MOD documents and co-ordination with on-site representative for corrections if required. Work Order scrutiny of ATR MOD workorders and co-ordination with AMEs for corrections.

Job Responsibilities: Technical author- Must have at least 8 years working experience in Aircraft Maintenance Manuals (AMM) tasks creation and revision preferably on Cabin and Systems ATA chapters. Have good understanding of the aircraft systems and components. Good understanding of aircraft maintenance procedures and documentation. Hands on experience on tools like SAP/GAMS, DACAS, A350 PC suite (PDM), Gipsy, Taksy, Epic Editor, Adobe Professional is an added advantage. Working Knowledge on TechPub Standards. (ATA, iSpec2200, S1000D) Strong Simplified English skills Will be involved in the creation/revision of A-350 AMM tasks based on the customer supplied inputs (MPMs, SBs, TRs etc.). Responsible to deliver the assigned tasks with quality and on time schedule compliance. Train and mentor new Resources. Make sure high Quality of deliverables and adherence to schedules. Experience in AMM creation / Revisions, Experience in Authoring / Proof Reading, and Quality Reviews. Soft Skills: Excellent skill requirement in Excel, Visio, PowerPoint, and MS word Good written and oral communication Strong teamwork skills. Technical Skills: Minimum 8yrs of working experience on Airbus manuals (A-350, SA, LR, MB AMM) especially on the following - ATA 21, 30, 35, 38- GE Local Line ATA 25-23/24-GE Local Line Trouble Shooting manual experience is preferred Qualification: Any Graduates Qualification: BE / Diploma / AME

We are seeking a B1 Licensed Aircraft Maintenance Engineer with a valid type rating on Bell 407 to join our aviation maintenance team in Coimbatore. The ideal candidate will have hands-on experience with Bell 407 helicopters and a solid understanding of regulatory compliance, safety, and quality standards. Key Responsibilities: Perform scheduled and unscheduled maintenance, inspections, and repairs on Bell 407 helicopters. Ensure compliance with DGCA, OEM guidelines, and approved maintenance programs. Document all maintenance activities accurately in aircraft logs and systems. Collaborate with technical teams to troubleshoot and resolve mechanical issues. Keep current with Bell 407 technical publications and service bulletins. Qualifications: Valid B1 AME license with type rating on Bell 407 . Minimum 3 years of certification experience on Bell 407. Additional type rating on Airbus H125 is an advantage. Experience with twin-engine helicopters preferred. Strong knowledge of aviation maintenance regulations, safety, and documentation standards.

About This Role No. of positions : 4 (B1/B3 - 3 & B2 - 1) Desired Qualification & Skills : AME license DA 40 / DA 42 Endorsement Good Communication skills in English (verbal & written) Ability to multi-task Computer knowledge preferred Work Experience : 5-6 years of relevant AME experience in Maintenance/Engineering dept. (FTO experience preferred). SUMMARY OF THE JOB AME is responsible to keep the Aircraft in an airworthy condition before release. Regular Maintenance, Scheduled Maintenance and snag rectification. ESSENTIAL DUTIES AND RESPONSIBILITIES : To carry out the maintenance work as per the call out issued by the CAMO dept. To issue CRS after carrying out any maintenance of the aircraft. To carry out the snag rectification for observed and reported snags. To carry out compliance of SB. AD, SI etc. To give work guidelines to supporting staff. To supervise task performed by aircraft maintenance technicians. To train the technicians for carrying out maintenance schedules. To provide requisition/place order to the store dept for procuring the spares as needed. And monitoring of alert list provided by CAMO Dept. To verify the spares that are issued to the aircraft while carrying out maintenance. Any other duties as may be assigned. KEY PROCESSES Aircraft maintenance Manuals Service Bulletins Airworthiness Directives Service Letter Modifications RMS and Time Management Employment status : Fixed-Term Contractual / Regular The working hours will be in shifts as per operational requirements. Position Type Regular CAE thanks all applicants for their interest. However, only those whose background and experience match the requirements of the role will be contacted. Equal Opportunity Employer CAE is an equal opportunity employer committed to providing equal employment opportunities to all applicants and employees without regard to race, nationality, colour, religion, sex, gender indentity and expression, sexual orientation, disability, neurodiversity, veteran status, age, or other characteristics protected by local laws. If you dont see yourself fully reflected in every job requirement listed in the job posting, we still encourage you to reach out and apply. At CAE, everyone is welcome to contribute to our success. Applicants needing reasonable accommodations should contact their recruiter at any point in the recruitment process. If you need assistance to submit your application because of incompatible assistive technology or a disability, please contact us at CAECarrieres-Careers@cae.com

We are looking for Offer Management Professional - Propulsion Components for Rolling Stock Youll make a difference by Develop a sustainable strategy and business plan. Plan sales volumes for potential customers. Responsible for driving sales as a primary function and will be accountable for set commercial targets and implementation of various business initiatives based on current and future market trends. Analyzes and evaluates markets and needs of potential or existing customers. Provides information via CRM tools for forecast and planning. Prepares customer developmental plans, builds, and maintains a customer focused ecosystem. Be able to provide consultation to customers about the best practices and benchmark approaches to present Siemens as a competent partner. Investigates and evaluates specific business opportunities for products/ service by analyzing short-, mid- and long-term investments of customers. Supports customers directly in the cost benefit analyses and calculations to demonstrate specific advantages of using Siemens Products/ Services. Facilitates organization in contract negotiations at all stages. Responsible for driving order income and revenue targets and related reporting. Prepares and negotiates offers in collaboration with Business Development Offer management according to internal processes. Establishes Technical, logistical, commercial, and mercantile feasibility of products. Facilitates conceptualization, validation, endorsement of the technical solution along with the Engineering, R&D and Product Management. Sets up the offer structure; align with Business Administration for costs, tax concept and Business model. Facilitate methods to conceptualize solutions and support risk mitigation. Prepare offer proposals for products and service opportunities to determine proposal feasibility and perform Cost/Risk assessment as well. Leads the development, editing and writing of proposals as well as other related documents according to offer preparation process. Offer approval involving various stakeholders, management, and headquarters as per the Limits of Authority (LoA) process. Responsible for offer management KPIs Establish communication channels with Execution to set-up for lessons learnt. To create quality offer to ensure a reduced Non-conformance. Desired Skills: We are seeking for a BE- Electronics, Electrical, Mechanical. Minimum 8 Years of relevant experience. You are Graduate/ masters in engineering (preferably Electrical/Mechanical) with 5 to 7 years of experience in Sales/ Bid Management of Railway Rolling Stock Propulsion System components. Youve sound knowledge of Propulsion Components for Railway Rolling Stock and know-how and professional exposure on the market requirements and offerings in this field would be an added advantage. Youve expertise in working in MS Office (Project, Excel & Power-Point) and ERP systems (SAP) to facilitate offer calculations Experience in preparing and analyzing product cost Experience of working in an multilocational international environment and collaboration with international teams is an added advantage and welcome. You have strong network in the Railway Rolling Stock Propulsion System components industry You have strong communication and influencing skills Experience of managing complex cross-functional teams without direct authority Experience of managing and balancing stakeholders expectations This role is based in Nashik. You might be required to visit other locations within India and outside. In return, you'll get the chance to work with teams impacting - and the shape of things to come.

Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : Aircraft Maintenance Manual Authoring Guidelines Good to have skills : NAMinimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Engineering Services Practitioner, you will assist with end-to-end engineering services to develop technical engineering solutions that address complex challenges and meet business objectives. Your typical day will involve collaborating with cross-functional teams, applying scientific and technical knowledge, and leveraging practical experience to devise innovative solutions in structural and stress design, qualification, configuration, and technical management. You will engage in problem-solving activities that require a blend of analytical thinking and creativity, ensuring that engineering solutions are not only effective but also aligned with organizational goals. Roles & Responsibilities:- Expected to perform independently and become an SME.- Required active participation/contribution in team discussions.- Contribute in providing solutions to work related problems.- Engage in continuous learning to stay updated with the latest engineering practices and technologies.- Collaborate with team members to identify areas for improvement in engineering processes and methodologies. Professional & Technical Skills: - Must To Have Skills: Proficiency in Aircraft Maintenance Manual Authoring Guidelines.- Strong understanding of engineering principles and practices.- Experience with technical documentation and compliance standards.- Ability to analyze complex engineering problems and develop effective solutions.- Familiarity with project management tools and methodologies. Additional Information:- The candidate should have minimum 3 years of experience in Aircraft Maintenance Manual Authoring Guidelines.- This position is based at our Bengaluru office.- A 15 years full time education is required. Qualification 15 years full time education

Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : Aircraft Structural Analysis Good to have skills : NAMinimum 15 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Engineering Services Practitioner, you will assist with end-to-end engineering services to develop technical engineering solutions that address complex challenges and meet business objectives. Your typical day will involve collaborating with various teams to analyze structural and stress design issues, applying scientific and technical knowledge to devise effective solutions, and ensuring that all engineering practices align with organizational goals. You will engage in problem-solving activities that require a blend of practical experience and socio-economic understanding, contributing to the overall success of engineering projects. Roles & Responsibilities:- Expected to be a Subject Matter Expert with deep knowledge and experience.- Should have influencing and advisory skills.- Responsible for team decisions.- Engage with multiple teams and contribute on key decisions.- Expected to provide solutions to problems that apply across multiple teams.- Facilitate knowledge sharing and best practices among team members to enhance overall project performance.- Conduct regular assessments of engineering processes to identify areas for improvement and implement necessary changes. Professional & Technical Skills: - Must To Have Skills: Proficiency in Aircraft Structural Analysis.- Strong understanding of structural integrity principles and methodologies.- Experience with finite element analysis software and tools.- Ability to interpret engineering drawings and specifications.- Familiarity with regulatory standards and compliance requirements in the aerospace industry. Additional Information:- The candidate should have minimum 15 years of experience in Aircraft Structural Analysis.- This position is based at our Bengaluru office.- A 15 years full time education is required. Qualification 15 years full time education

Educational Master Of Science (Engg),Master Of Comp. Applications,Master Of Technology,Master Of Engineering,Bachelor Of Science,Bachelor Of Comp. Applications,Bachelor Of Technology,Bachelor of Engineering Service Line Engineering Services Responsibilities Sound knowledge of Aero Engine Component Design and Non Conformance Assessment Process and sentencing of production / Overhaul / Service Components (Technical Variance) Experience in design, development and Non Conformance/ DAR's/ TAD and QN assessment of complex fabrications such as casings, rings, complex unit mounting, fairings, inlets/Outlets & fairings Experience in design , development and installations for engine external components such as ducts, harness, pipes, hoses and brackets Understanding of engine subsystem level requirements for developing component level concepts and Modification policy for Fleet, cost and performance optimization updates Creation of Design definition which includes geometry creation, design solution drawings, component models and drawing definitions, interface control documents etc. Design modification of gas turbine engine components to get cost reduction, to resolve service issues and manufacturing issues. etc. Reviewing concessions and recommending for drawing change through Definition Alteration Request (DAR) process. Fit, Form and Functionality analysis of various components with defects through concession, DAR TAD’s . Carrying out tolerance stack analysis, layout in UG , interaction with various specialists like Stress engineer, Air system, Materials engineer Experience in development of Engine Control system hardware and software , testing and understanding of Engine health monitoring system Experience in Life Cycle Engineering activities specifically Reliability Engineering for Engine Components Prepare AMM, CMM, EMM publications, Create and Edit Life Management plan for engine components Experience in resolving customer queries / issues in service bulletins, mod bulletins etc. Experience in reliability management through LRU trend reports, service experience reports, root cause analysis reports Experienced in design in context, safety requirements, DFMEA and PFMEA methods Experience in working Team center, UGNX and PDM Metaphase Technical and Professional : Primary Skills Aerospace Domain, Aerospace Domain-Aircraft Maintenance, Embedded Software-Control Systems & Acquisition SystemsSecondary Skills Aero Engine Design, Aero Engine Stress, CFD, UGNX Preferred Skills: Domain-Aerospace-Airframe Domain-Aerospace-Interiors/Exteriors Domain-Aerospace-MRO Domain-Aerospace-Systems

Project Role : Engineering Services Practitioner Project Role Description : Assist with end-to-end engineering services to develop technical engineering solutions to solve problems and achieve business objectives. Solve engineering problems and achieve business objectives using scientific, socio-economic, technical knowledge and practical experience. Work across structural and stress design, qualification, configuration and technical management. Must have skills : Aircraft Design Good to have skills : NAMinimum 2 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Engineering Services Practitioner, you will assist with end-to-end engineering services to develop technical engineering solutions that address complex challenges and meet business objectives. Your typical day will involve collaborating with cross-functional teams, applying scientific and technical knowledge, and leveraging practical experience to solve engineering problems effectively. You will engage in various aspects of structural and stress design, qualification, configuration, and technical management, ensuring that all solutions align with organizational goals and industry standards. Roles & Responsibilities:Responsible for providing deliverables to specification, within agreed timescale, meeting the necessary quality standards and to customer satisfaction.Ability to deconstruct complex problem into solvable issues.Maintaining the Quality records and KPIs.Logging deliverables and Project tracking.Organized and Pro-active.Elaborative and precise communication skills.Ability to deep dive into subject matter without losing focus on deliverables.French/German language is an added advantage.Onsite experience is an added advantage. Professional & Technical Skills: . Experience in Airbus Concession methodologies and Processes for A350 Task T100/T200.Should have Experience on the design assessment for aircraft components and assemblies. MAP (HAM/TO).Analysis of production and in-service non-conformities.Minimum 2+ years of working experience on Concession, Strong Manufacturing engineering knowledge, drawing reading, and understanding skills, Knowledge on GD&T.Working Knowledge in Metallic and Composite Aircraft Structures.Structure experience is an added advantage.Catia V5:Good Hands-on experience in different Catia Modules such as Part Design, Surface, Sheet Metal and CPDWorking Knowledge on PASS, VPM, SAP (PEA & PAC). GILDA Exposure to work with Scripts (VBA) /Macros is an added advantage. Additional Information:- The candidate should have minimum 2 years of experience in Aircraft Design.- This position is based at our Bengaluru office.- A 15 years full time education is required. Qualification 15 years full time education

Are you ready to take on real-time challenges that directly impact airline operations? In this dynamic role, youll work closely with global customer support teams, focusing on Nacelle structures and ATA specifications. You ll play a critical role in providing 24/7 technical assistance , managing customer requests across cross-functional teams, negotiating delivery timelines, and proactively resolving complex operational issues. If you thrive in fast-paced, high-impact environments and are passionate about aviation and customer success, this role is for you. Primary Responsibilities: Quickly understands and assesses Airlines unique requirements and provides technical and informational support for in-service issues. Reviews various maintenance documentation to identify solution(s) for in-service concerns and look proactively for potential fleet solutions. Reviews engineering drawings and installations to ensure customer questions/concerns are resolved Assists with the investigation of problems to provide engineering dispositions of discrepancies to return airplanes to revenue services. Assists in the development of customer correspondence for continued safe operation and maintenance of equipment. The position requires flexibility to address emergent issues and meetings with stakeholders may require an occasional off-shift work schedule to support the airline customers operating 24/7. Ensure strict compliance to Aftermarket departmental procedures, Company policies, Export requirements, including compliance to all US export control requirements Maintain a high degree of reliability and accuracy in all communications with Airlines, MROs, OEMs, Suppliers and other key stakeholders Work alongside with a globally diverse aftermarket team of highly skilled engineers and be at the forefront of driving airline customer experience. Report into Aftermarket technical services leaders and help in driving organization s vision of the best aerospace systems company in the world Basic Qualifications: Minimum of Bachelors degree or higher in Mechanical engineering or Aerospace or Aeronautics. Full time recognized Bachelor of Engineering (4 years) with 7 to 9 years of related work experience in similar roles. Preferred Skills: Experience supporting end users in a Aftermarket customer service role is highly preferrable. Functional knowledge of Nacelle Systems and its components on various civil aircraft programs Very good familiarity and working knowledge of CRM systems like MS Dynamics Conversant with maintenance manuals such as Component Maintenance Manual, Aircraft Maintenance Manual, Structural Repair Manuals, Service Bulletins, Airworthiness Directives, etc. Good verbal and written communication and presentation skills. Experience in handling of repair, maintenance and retrofit processes, practices and documentation. Good team player, willing to work in a dynamic and fast paced collaborative environment Ability to organize, prioritize, multi-task, and manage time effectively Ability to work under pressure in a fast-paced environment with short lead times handling multiple repair tasks. Willingness to expand into technical areas without prior experience. Basic knowledge of Nacelle Systems for legacy aircraft programs and new aircraft programs such B787, A320Neo, A220, A350 is preferred

Job responsibilities - Develop and implement a Continuous Airworthiness Management System (CAMS), ensure compliance with all regulatory requirements and industry best practices. Develop and maintain a comprehensive maintenance program for all aircrafts and flight training devices, ensure maintenance and inspections, and tracking of maintenance records. Monitor the performance of the aircraft and equipment to identify potential issues and take corrective action, as necessary. Conduct regular audits and inspections of aircraft and maintenance facilities to ensure compliance with all applicable regulations and standards. Report all the information on incidents and accidents related to aircraft maintenance and operation to regulatory authorities & internal team. Provide guidance and training to maintenance personnel on best practices for aircraft maintenance and safety. Maintain accurate and up-to-date records of aircraft maintenance, inspections, and repairs. Educational and Experience Requirements Minimum Education requirements Technical (Diploma/Bachelor s) degree in field / master s degree Minimum Desired Experience 10+ years experience in aircraft maintenance and airworthiness management Prior experience in DGCA-approved positions in FTOs/ATOs/Airlines/NSOPs in India As per DGCA, CAR M Subpart G, CAM 15+ years experience in aircraft maintenance and airworthiness management Prior experience with similar fleet (Piper & Diamond)

ROLES AND RESPONSIBILITY: Conduct comprehensive verification of operator work against established process plans for welding, heat treatment, and thermal spray operations and likewise on aerospace components. Ensure operators utilize correct process parameters, machine programs, and tooling as specified in engineering documentation for each manufacturing step. Oversee and verify accurate recording of critical process data, including program versions, machine settings, and material traceability information. Confirm achieved dimensions, surface finishes, and other critical characteristics comply with engineering drawings, manuals, and quality standards. Identify and document any deviations or non-conformances from established procedures, escalating issues as required. Ensure all verification activities and process outputs meet stringent aerospace industry quality and regulatory requirements (e.g., AS9100). Maintain meticulous records of all verification activities, findings, and corrective actions, preparing detailed reports for management and quality assurance teams. SKILLS / COMPETENCE: Must have: 5 - 7 Years of experience in repair process engineering A good team player, people leader who can work well under pressure or in stressful and demanding situations or environments. Well aware of Aircraft /Aero Engine components and functional details along with their operation procedures. Hands on experience on various repair processes (e.g Machining, Thermal spray coating/plating, Welding, Heat Treatment, Etching, NDT & Cleaning) & Engineering drawings. Thorough understanding of Engine Manuals, SPMs and Repair processes Having good knowledge on GD&T and ASME Y14.5 1994 standards. Effective communicator and should have the ability to lead client discussions with all stakeholders on Technical subject related and take decisions accordingly. Competent in MS office applications. Ability to train, mentor and control the new joiners in the team. Desired: Worked on Aero Engine Components

Field Data collection, sanitise field events data for processing, Shop visit reports sanitizing, process AOG spares orders. Process the data in the processing tool following the industry/customer standards, business rules and guidelines. validate the processed data against the acceptance criteria with respect to processing rules and business rules. Derive reliability metrics and dashboards as per requirement Maintain individual and team day/week/monthly metrics for the data processed Involve in customer meetings for process improvement Ensure that all assigned tasks are completed to the delivery schedule, quality and plan. Record and keep track of quality metrics and improvements areas received through feedback. Maintain and meet the expected improvement. Maintain the customer and organization data security guidelines. Required 2-4 years of relevant experience.