21 Wireless Protocol Jobs

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: General Summary Join Qualcomms cutting-edge hardware engineering team to drive the design verification of next-generation SoCs, with a focus on wireless technologies including WLAN (IEEE 802.11). You will work on IP and subsystem-level verification, collaborating with cross-functional teams to deliver high-performance, low-power silicon solutions. A strong understanding of on-chip buses and bridges is essential to ensure seamless integration and performance across subsystems. Key Responsibilities Develop and execute verification plans for complex SoC designs and IP blocks. Architect and implement testbenches using SystemVerilog and UVM/OVM methodologies. Perform RTL verification, simulation, and debugging. Collaborate with design, architecture, and software teams to ensure functional correctness. Contribute to IP design reviews and sign-off processes. Support post-silicon validation and bring-up activities. Analyze and verify interconnects, buses (e.g., AMBA AXI/AHB/APB), and bridges for performance and protocol compliance. Conduct CPU subsystem verification including coherency, cache behavior, and interrupt handling. Perform power-aware verification using UPF/CPF and validate low-power design intent. Execute performance verification to ensure bandwidth, latency, and throughput targets are met. Preferred Skills & Experience 2"“15 years of experience in digital design and verification. Deep understanding of bus protocols and bridge logic, including hands-on experience with AXI, AHB, and APB. Experience with CPU subsystem verification and performance modeling. Familiarity with wireless protocols (IEEE 802.11 a/b/g/n/ac/ax/be) is a plus. Proficiency in SystemVerilog, UVM/OVM, Verilog, and scripting languages (Perl, Tcl, Python). Experience with power-aware verification methodologies and tools (e.g., UPF, CPF). Familiarity with performance verification techniques and metrics. Exposure to tools like Clearcase/Perforce and simulation/debug environments. Strong analytical, debugging, and communication skills. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Minimum Qualifications Bachelors or Masters degree in Electrical/Electronics Engineering, Computer Science, or related field. Relevant experience in hardware design and verification.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: General Summary Join Qualcomms Wireless IP team to design and develop cutting-edge RTL for next-generation cellular and Wi-Fi modem IPs used in mobile, wearable, and IoT platforms. You will work on high-performance, low-power digital designs across the full VLSI development cycle"”from architecture and micro-architecture to RTL implementation and SoC integration. This role offers the opportunity to collaborate with global teams and contribute to market-leading wireless solutions. Key Responsibilities Design and implement RTL for wireless modem IPs and SoC subsystems using Verilog/SystemVerilog. Develop micro-architecture specifications and deliver high-quality, synthesizable RTL. Integrate complex subsystems into SoC environments and support design convergence. Collaborate with system architects, verification, SoC, software, DFT, and physical design teams. Apply low-power design techniques including clock gating, power gating, and multi-voltage domains. Analyze and optimize for performance, area, and power. Ensure protocol compliance and performance of interconnects, buses (AXI, AHB, APB), and bridges. Conduct CDC and lint checks using tools like Spyglass and resolve waivers. Participate in post-silicon debug and bring-up activities. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Preferred Skills & Experience 2"“15 years of experience in digital front-end ASIC/RTL design. Strong expertise in Verilog/SystemVerilog RTL coding and micro-architecture development. Familiarity with wireless protocols such as IEEE 802.11 (a/b/g/n/ac/ax/be), LTE, or 5G NR is highly desirable. Solid understanding of bus protocols (AXI, AHB, APB) and bridge logic. Experience with wireless modem IPs or similar high-performance digital blocks is a plus. Familiarity with low-power design methodologies and CDC handling. Hands-on experience with tools like Spyglass, 0-in, Design Compiler, PrimeTime, and simulation environments. Exposure to post-silicon debug and SoC integration challenges. Strong documentation and communication skills. Self-motivated with a collaborative mindset and ability to work with minimal supervision. Minimum Qualifications Bachelors or Masters degree in Electronics, VLSI, Communications, or related field. Proven experience in RTL design and SoC development.

Job Area: Engineering Group, Engineering Group > Systems Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Systems Engineer, you will research, design, develop, simulate, and/or validate systems-level software, hardware, architecture, algorithms, and solutions that enables the development of cutting-edge technology. Qualcomm Systems Engineers collaborate across functional teams to meet and exceed system-level requirements and standards. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Systems Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Systems Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. Come and join the team that is pushing the envelope and doing foundational R&D for next generation wireless technology! You will be researching, designing, and implementing SW/FW to enable the advanced Wireless WAN features and end-to-end solutions with a focus on layer-1 (PHY layer) functions. This position will expose you to Qualcomms innovative SOC, DSP, Baseband, RF as well as the latest FPGAs and compute platforms in the industry. Minimum Required Skills: Bachelor's degree in computer engineering, Computer Science, Electrical Engineering or related field. 3+ years of Software Engineering on Embedded Platform 3+ years of experience with programming languages such as C, C++, Python , etc. Experience implementing wireless protocols (e.g. 5G/LTE, Wi-Fi ) in Layer 1 (PHY and RF) Preferred Skills Wireless Communication and Digital Signal Processing Theory Knowledge of Operating systems and computer architecture Knowledge of Software architecture and processes Prior experience in DSP Processor Programming (e.g. Tensilica DSP) Prior experience in working with large code base, SW implementation/debugging in a embedded platform Ability to work in a fast-paced dynamic team environment

Job Tittle: Senior Engineer - Firmware Testing Job Location: Noida Work Mode: Work from Office Must have experience: Firmware/Embedded testing Key Purpose of Role: As an engineer in test, validation and automation, the candidate should participate in defining test strategy, developing test cases, and writing scripts , creation of Automation suites, automatic test execution & providing/enabling CI/CD based test solutions. Manual test execution if business need arises. Contribute to develop test solutions. Understand new technologies/requirements and create tests. Areas of Responsibility / Tasks: Review product requirements, architecture designs and provide feedback to development teams. Develop system test strategies, test plans and execute testing, along with developing test automation framework and test scripts. Working, enabling and providing CI/CD based test pipelines. Drive initiatives to improve overall quality, effectiveness of testing, quick turnaround of bugs. Must be able to apply knowledge of network and wireless protocols and test methodology to develop test cases and execution. Responsible for the creation and maintenance of relevant documentation in a CMMi and related context. Efficient collaboration with local and European test and design teams, including gathering and integration of relevant best practices of in the respective field. Hands-on test automation and manual test implementation of complex functions during the implementation phase of the project. Ability to perform stress and long term tests via Automation/Manual pro-actively seeks to make continuous improvements to Test coverage, execution and automation. Analysing technical requirements in view of testing. Identify design for testability needs. Ability to understand C/C++ based code and provide first level analysis of issues and propose fixes/solutions. Metering domain/Communication testing Experience in testing embedded products Automation using LabVIEW, Test-Stand, Python, Perl and other tools Testing in Scrum/Agile development framework Understanding of C, C++ and debugging Network, Wireless and Hardware Device Knowledge Experience using Defect management, Source Code Managenent, REQUIREMENT Management tools. Link to apply : https://careers.landisgyr.com/job-invite/20127/ Regards HR Team

Key Responsibilities: Develop and maintain embedded software for wireless products such as IoT devices, RF modules, BLE, Wi-Fi, LoRa, Zigbee, or LTE-based systems . Work with cross-functional teams to integrate software with custom hardware and validate end-to-end functionality. Implement and optimize protocol stacks and communication layers. Design and develop real-time embedded applications using RTOS or bare-metal environments. Interface with hardware peripherals (UART, SPI, I2C, ADC, DMA, etc.). Debug and resolve system-level issues using embedded development tools (JTAG, SWD, logic analyzers, protocol sniffers). Ensure software quality through code reviews, unit tests, and automated validation. Contribute to firmware architecture, design documents, and version control practices. Required Skills & Qualifications: Bachelors or Master’s degree in Electronics, Computer Science, Electrical Engineering, or related field. 4+ years of experience in embedded C/C++ programming . Strong understanding of wireless communication protocols such as BLE, Wi-Fi, LoRa, Zigbee, or 6LoWPAN. Proficiency with RTOS platforms (e.g., FreeRTOS, Zephyr) or bare-metal programming. Experience working with MCUs/SoCs (e.g., Nordic nRF, STM32, ESP32, TI CC series). Solid grasp of embedded system constraints (memory, power, real-time processing). Experience with version control tools like Git and development workflows.

Job Title: Sr. Embedded Engineer Qualifications: A BE/B.Tech degree in Electronics & Communication (EC), Electronics & Telecommunication (ETC), or Electrical Engineering (EE) is required. 25 years of relevant experience. Desired Skills: Experience in the complete lifecycle of embedded product development, from Bill of Quantities (BOQ) to the final product. Hands-on experience with 8-bit, 16-bit, and 32-bit microcontroller development environments and programming. Proficiency in coding languages such as C, C++, and Python. Hands-on experience in PCB design using applications like OrCAD and PADS is an added advantage. Extensive experience with communication interfaces such as I2C, SPI, UART, and Modbus. Knowledge of wired and wireless protocols/technologies such as Ethernet, Wi-Fi, ZigBee, and BLE. Experience in signal processing at sub-GHz levels. Familiarity with testing tools like logic analyzers, oscilloscopes, and debugging tools. Understanding of EMI/EMC/IPXX testing procedures. Knowledge of Industry 4.0 and 5.0 technologies, including Industrial Internet of Things (IIoT) standards. Roles and Responsibilities: As part of the product development team, you will be responsible for designing, developing, coding, testing, and debugging embedded systems. Optimize power consumption for embedded systems. Ensure that the product meets relevant standards and certifications. Optimize the Bill of Materials (BOM) cost without compromising on product quality and functionality.

Job TitleSenior Engineer(Timing & Synchronization) LocationBengaluru Work EmploymentFull time DepartmentWireless DomainSoftware Reporting toManager About Us Tejas Networks is a global broadband, optical and wireless networking company, with a focus on technology, innovation and R&D. We design and manufacture high-performance wireline and wireless networking products for telecommunications service providers, internet service providers, utilities, defence and government entities in over 75 countries. Tejas has an extensive portfolio of leading-edge telecom products for building end-to-end telecom networks based on the latest technologies and global standards with IPR ownership. We are a part of the Tata Group, with Panatone Finvest Ltd. (a subsidiary of Tata Sons Pvt. Ltd.) being the majority shareholder. Tejas has a rich portfolio of patents and has shipped more than 900,000 systems across the globe with an uptime of 99.999%. Our product portfolio encompasses wireless technologies (4G/5G based on 3GPP and O-RAN standards), fiber broadband (GPON/XGS-PON), carrier-grade optical transmission (DWDM/OTN), packet switching and routing (Ethernet, PTN, IP/MPLS) and Direct-to-Mobile and Satellite-IoT communication platforms. Our unified network management suite simplifies network deployments and service implementation across all our products with advanced capabilities for predictive fault detection and resolution. As an R&D-driven company, we recognize that human intelligence is a core asset that drives the organization’s long-term success. Over 60% of our employees are in R&D, we are reshaping telecom networks, one innovation at a time. Why join Tejas: We are on a journey to connect the world with some of the most innovative products and solutions in the wireless and wireline optical networking domains. Would you like to be part of this journey and do something truly meaningful? Challenge yourself by working in Tejas’ fast-paced, autonomous learning environment and see your output and contributions become a part of live products worldwide. At Tejas, you will have the unique opportunity to work with cutting-edge technologies, alongside some of the industry’s brightest minds. From 5G to DWDM/ OTN, Switching and Routing, we work on technologies and solutions that create a connected society. Our solutions power over 500 networks across 75+ countries worldwide, and we’re constantly pushing boundaries to achieve more. If you thrive on taking ownership, have a passion for learning and enjoy challenging the status quo, we want to hear from you! About the Team Our Team Modern eNodeB (4G LTE Radio) or gNodeB (5G NR Radio) are key elements of mobile Telecom network. These radios are realized in different ways Standalone Radio , BBU (Base Band Unit) and RRH (Remote Radio Head), O-RAN CU (Central Unit) DU (Distributed Unit) and RU (Radio Unit). In deployments RU/RRH are deployed on top of the tower and BBU/CU-DU at bottom. The RU/RRH key functionality is to convert base band signals to RF and also amplify signal to higher power. Tejas Networks has invested in Wireless product development since 2012 with a vision to create globally deployable telecom RAN solutions. Several of the key components developed by the Wireless R&D team have been installed and commissioned across three continents. We are an active partner for 5G in the Indian Ecosystem and have significantly contributed to India’s standardization efforts in 3GPP, through TSDSI. The wireless team has over 100 patents. As part of the wireless team, you will work on developing products for next generation wireless systems. What you work: Responsible for Design, Development and Implementation of Timing & Synchronization Chipset Control and Configuration software Applications related to 5G Radio Unit Must have ability to think outside the box, creating innovate solution to complex embedded applications and wireless systems. Candidate will be working in variety of wireless products that are telecom grade developed, manufactured, and supplied to international customers by Tejas Networks Ltd should have working experience with international customer & have handled development of software’s for networking / telecom equipment’s. Responsible forbuilding Application / Control Software Timing & Synchronization Lead team of 2-3 Members, build & nurture people involved in 5G O-RU platform Timing and Synchronization software development activities. Platform Architecture definition and bring in innovation in modularity. Interact & Coordinate with internal teams to build better product Mandatory skills: Must have mandatory experience in developing application, drivers , wrapper code for one of the T&S Chipsets from SiTime, SiLabs, ADI, TI Must have knowledge on PTP, SyncE and associated ITU Standards. Must have experience in building application including the use of interfaces such as AXI, UART, SPI, I2C, JESD, GPIO etc. on FPGA/SoC. Must have understanding on Message queues, Shared memory, Process, Threads, Scheduler Must have hands on experience in handling Oscilloscopes, Logic/ protocol Analyzers, Multimeters etc. Understanding of debuggers including JTAG, GDB etc. Understanding of GitHub, Jira etc. Understanding of baseband control system, state machines and configuration management. Good in documentation of High-level design and Low-level design. Desired Skills: Secure coding and software quality management. Knowledge on Mobile Wireless Systems. Knowledge on Network protocols and socket programming. Experience in Wireless Radio, Wireless protocols desirable Preferred Qualifications: Experience: 3-6 years’ experience in Timing and Syne with Radio- ORAN Education: B.E / BCA / M.S / M.Tech in Electronics Communication OR Instrumentation engineering discipline or equivalent Diversity and Inclusion Statement : Tejas Networks is an equal opportunity employer. We celebrate diversity and are committed to creating all inclusive environment for all employees. We welcome applicants of all backgrounds regardless of race color, religion, gender, sexual orientation, age or veteran status. Our goal is to build a workforce that reflects the diverse communities we serve and to ensure every employee feels valued and respected.

Job TitleSenior Engineer (ORAN Radio App Development ) LocationBengaluru Work EmploymentFull time DepartmentWireless DomainSoftware Reporting toManager About Us Tejas Networks is a global broadband, optical and wireless networking company, with a focus on technology, innovation and R&D. We design and manufacture high-performance wireline and wireless networking products for telecommunications service providers, internet service providers, utilities, defence and government entities in over 75 countries. Tejas has an extensive portfolio of leading-edge telecom products for building end-to-end telecom networks based on the latest technologies and global standards with IPR ownership. We are a part of the Tata Group, with Panatone Finvest Ltd. (a subsidiary of Tata Sons Pvt. Ltd.) being the majority shareholder. Tejas has a rich portfolio of patents and has shipped more than 900,000 systems across the globe with an uptime of 99.999%. Our product portfolio encompasses wireless technologies (4G/5G based on 3GPP and O-RAN standards), fiber broadband (GPON/XGS-PON), carrier-grade optical transmission (DWDM/OTN), packet switching and routing (Ethernet, PTN, IP/MPLS) and Direct-to-Mobile and Satellite-IoT communication platforms. Our unified network management suite simplifies network deployments and service implementation across all our products with advanced capabilities for predictive fault detection and resolution. As an R&D-driven company, we recognize that human intelligence is a core asset that drives the organization’s long-term success. Over 60% of our employees are in R&D, we are reshaping telecom networks, one innovation at a time. Why join Tejas: We are on a journey to connect the world with some of the most innovative products and solutions in the wireless and wireline optical networking domains. Would you like to be part of this journey and do something truly meaningful? Challenge yourself by working in Tejas’ fast-paced, autonomous learning environment and see your output and contributions become a part of live products worldwide. At Tejas, you will have the unique opportunity to work with cutting-edge technologies, alongside some of the industry’s brightest minds. From 5G to DWDM/ OTN, Switching and Routing, we work on technologies and solutions that create a connected society. Our solutions power over 500 networks across 75+ countries worldwide, and we’re constantly pushing boundaries to achieve more. If you thrive on taking ownership, have a passion for learning and enjoy challenging the status quo, we want to hear from you! About the Team The Radio Software Team is Modern eNodeB (4G LTE Radio) or gNodeB (5G NR Radio) are key elements of mobile Telecom network. These radios are realized in different ways Standalone Radio , BBU (Base Band Unit) and RRH (Remote Radio Head), O-RAN CU (Central Unit) DU (Distributed Unit) and RU (Radio Unit). In deployments RU/RRH are deployed on top of the tower and BBU/CU-DU at bottom. The RU/RRH key functionality is to convert base band signals to RF and also amplify signal to higher power. Tejas Networks has invested in Wireless product development since 2012 with a vision to create globally deployable telecom RAN solutions. Several of the key components developed by the Wireless R&D team have been installed and commissioned across three continents. We are an active partner for 5G in the Indian Ecosystem and have significantly contributed to India’s standardization efforts in 3GPP, through TSDSI. The wireless team has over 100 patents. As part of the wireless team, you will work on developing products for next generation wireless systems. What you work: Responsible for Design, Development and Implementation of Fronthaul & LowPHY Control and Configuration software applications related to 5G Radio Unit Must have ability to think outside the box, creating innovate solution to complex embedded applications and wireless systems. Candidate will be working in variety of wireless products that are telecom grade developed, manufactured, and supplied to international customers Tejas Networks Ltd. should have working experience with international customer & have handled development of software’s for networking / telecom equipment’s. Responsible forbuilding Control and Configuration Software FPGA/SoC Based FrontHaul, BeamForming & LowPHY IPs Platform Architecture definition and bring in innovation in modularity. Interact & Coordinate with internal teams to build better product. Mandatory skills: Must have mandatory experience in developing sequencing, control, and configuration application wrapper code for eCPRI FrontHaul, LowPHY and Beamforming IPs of Xilinx or Intel. Must have knowledge on O-RAN WG4 CUS plane. Should have worked on 7.2x Split O-RUs. Understanding of O-RAN WG4 M-Plane. Must have knowledge on Embedded build environment. Must have experience in writing drivers for devices with interfaces such as AXI, UART, SPI, I2C, JESD, GPIO etc. Must have understanding on Message queues, Shared memory, Process, Threads, Scheduler Must have hands on experience in handling Oscilloscopes, Logic/ protocol Analyzers, Multimeters etc. Understanding of debuggers including JTAG, GDB etc. Understanding GitHub, Jira etc. C OR C++ OR Python Understanding of baseband control system, state machines and configuration management. Good in documentation of High-level design and Low-level design. Desired Skills: Programming of Clocking ICs (AD, Si Labs, SiTime, Microsemi etc) Experience in using Spectrum Analyzer, Signal Generators, RF Power measurement. Secure coding and software quality management. Knowledge on High Power RF Wireless Systems. Knowledge on Network protocols and socket programming. Experience in Wireless Radio, Wireless protocols desirable Preferred Qualifications: Experience: 3+ years’ experience working in application development for Radio Fronthaul, Beam Forming & LowPHY Education: E / B.TECH / M.S / M.Tech in engineering discipline or equivalent work experience Diversity and Inclusion Statement : Tejas Networks is an equal opportunity employer. We celebrate diversity and are committed to creating all inclusive environment for all employees. We welcome applicants of all backgrounds regardless of race color, religion, gender, sexual orientation, age or veteran status. Our goal is to build a workforce that reflects the diverse communities we serve and to ensure every employee feels valued and respected.

Network Consultant(L2 Network Engineer) Location : Hyderabad Shift : Rotational shift Work from Office Company Name: Bell Techlogix Strong Experience in switching, routing, wireless, and firewalls CCNP Certified Mandatory CCNA Juniper Mist is Mandate Essential Functions: Develop network architecture for a multi-tenant enterprise environment. Responsible for the lifecycle of architecture, from inception to working with engineering teams on implementation and supportability of design. Build reusable designs and systems that promote scale, reliability, security and efficiency. Manage and maintain multi-vendor, multi-protocol datacenter and backbone networks. Define and develop optimized network monitoring systems. Develop and maintain consistency within the networking infrastructure. Troubleshoot and remedy network-related issues. Ability to participate in a regular on-call rotation. Required Education, Knowledge, and Experience: BS degree in Computer Science or related technical field involving systems engineering, or equivalent practical experience. 5+ years of experience working on a service provider or enterprise-level network in an engineering or design capacity. A deep understanding of network protocols, including IP and related transports, BGP, EIGRP and OSPF. A deep understanding of network hardware internals, including forwarding, filtering, and policing mechanisms. A solid understanding of application protocols, including DNS, IPSEC, HTTPS, and TLS. Practical experience in network device firmware management in a large-scale enterprise environment Experience developing network automation tools in at least one language (Python, Perl, C++, Bash, etc.). Experience with and understanding of authentication mechanisms, including PKI. Proven expertise with network hardware and software, preferably including Cisco, Juniper, HPE, Fortinet etc. - CCNP certification required, JNCIA/JNCIS certification preferred. Strong understanding of wireless protocols with proven experience in Juniper Mist, Cisco WLC and Ruckus Strong written and verbal communication skills. Interested candidate should reach out to HR Ruchita 9136606172 ruchita.ulhalkar@enlink.com

How You'll Help Us Connect the World: RUCKUS Networks builds and delivers purpose-driven networks that perform in the tough, unique environments of the industries we serve.Leveraging network assurance and enterprise-wide automation driven by AI and machine learning (ML), we empower our customers to deliver exceptional experiences for every employee, guest, customer, student, and resident who counts on those networks to connect with their digital lives. We are seeking a Staff/Sr. Staff Engineer to join our dynamic Wi-Fi development team in Bangalore, India. In this role, you will drive the design, and development of cutting-edge, carrier-grade wireless access points, enabling enterprises and carriers to stay ahead of the rapidly growing demand for high-bandwidth applications. Roles and responsibilities: Design and develop Wi-Fi features that align with evolving standards, focusing on high performance, low latency, and guaranteed service delivery Collaborate with chip vendors to drive innovation, enhance SDKs, and support multi-platform, multi-standard solutions Lead & contribute to design discussions and code reviews in adopting the best solutions Act as a technical mentor, guiding other team members and focusing on customer-driven outcomes Partner with technical product owners & other team members to meet customer requirements Required Qualifications Bachelor's or Master's Degree in Networking or Wireless and 6-10 Years of relevant experience In-depth knowledge of Wi-Fi access point (AP) software development and Wi-Fi standards Experience in designing complex features in Wi-Fi AP products Expertise in embedded systems, kernel, and device drivers programming Proven experience with SDK integration across multiple platforms Ability to thrive in a fast-paced, innovative environment, pushing the boundaries of technology

Key Responsibilities: Develop, test, and optimize firmware for embedded systems. Work with microcontrollers, peripherals, and communication protocols (SPI, I2C, UART, CAN, etc.). Write efficient, well-structured, and maintainable C/C++ code. Debug and troubleshoot firmware issues using tools like JTAG, oscilloscopes, and logic analyzers. Collaborate with hardware, software, and test engineers to ensure seamless system integration. Implement and maintain real-time operating systems (RTOS) when required. Develop and execute unit tests and automated test scripts for firmware validation. Maintain firmware documentation, version control, and best coding practices. Requirements: Strong proficiency in C/C++ programming for embedded systems. Hands-on experience with microcontrollers (ARM Cortex-M, STM32, PIC, etc.). Familiarity with hardware debugging tools (JTAG, SWD, oscilloscopes, logic analyzers). Experience with communication protocols (SPI, I2C, UART, CAN, Ethernet). Understanding of power management, low-power firmware techniques, and bootloaders . Experience with version control systems like Git . Strong analytical and problem-solving skills. Excellent teamwork and communication skills. Preferred Qualifications: Experience with real-time operating systems (RTOS) like FreeRTOS or Zephyr. Experience with wireless protocols (BLE, Wi-Fi, LoRa, Zigbee). Knowledge of safety and security principles in embedded systems. Experience with automotive, industrial, or IoT systems . Familiarity with scripting languages (Python, Shell) for testing and automation. Exposure to Yocto, Linux kernel development, or device drivers is a plus. Interested, Kindly share your profile to rafik_raja@onwardgroup.com Regards, Rafik Raja S Onward Technologies.

1. Min. 6 years experience in developing firmware for 16 bit/32 bit microcontrollers using Embedded C 2. Hands on experience in writing device drivers 3. Hands on experience in interfacing peripherals - EEPROM, BLE module etc 4. Knowledge of debugging tools, different IDE, hands on experience in board bring up and troubleshooting 5. Excellent problem solving and analytical skills 6. Good communication skills - verbal and written. Embedded C, wireless protocols - BLE, WiFi, wired protocols - I2C, SPI, RS485, RS232, microcontroller programming (bare-metal) Named Job Posting? (if Yes - needs to be approved by SCSC) Additional Details Global Grade : C Level : To Be Defined Named Job Posting? (if Yes - needs to be approved by SCSC) : No Remote work possibility : No Global Role Family : To be defined Local Role Name : To be defined Local Skills : embedded C;device drivers;EEPROM Languages Required: : ENGLISH Role Rarity : To Be Defined

Chennai, Bangalore, Pollachi, Manesar, Experience - 3 yrs - 9 yrs, WLAN/Linux driver development with a record of strong individual technical achievement Strong programming skills in C Good experience in the Wifi access point, Wifi security WPA/WPA2/ WPA- PSK. Hands on experience in Networking driver development, Ethernet and Wireless LAN driver development preferred Have worked on the Openwrt/ Embedded Linux platform. Good skills in WLAN/802.11 a/b/g/n, 802.11k,v,r 802.11s,- Wireless networking development or testing background. Experience in Wireless LAN protocols is a BIG plus, Linux, Wireless networking, Wireless protocol. Wifi access point, Wifi security WPA/WPA2/ WPA- PSK,Networking driver development, Ethernet and Wireless LAN driver ,Openwrt/ Embedded Linux platform,Wireless LAN protocols is a BIG plus, Linux, Wireless networking, Wireless protocol

Embedded C Experience - 6-10yrs Location Gurgaon About The Role Core knowledge about FW development- Proficient in embedded C Development experience in any communication protocols I2C / UART / Mod Bus / SPI Board bring-up (Preferably STM32) Good debugging knowledge(Critical customer issues) CI/CD and Git code management process (Good to have) Knowledge about Wireless protocols (Good to have) Lead a team of developers.

How You'll Help Us Connect the World: We are looking for talented software professional as Wi-Fi Architect for Wi-Fi engineering group in India. The candidate will be driving architecture, design and development of next-gen carrier-grade wireless access points that will enable carrier and enterprise customers to stay ahead of the exploding demand for high-bandwidth applications and services. Required Qualifications for Consideration: B.Tech/ M.Tech or Ph.D. in Networking or Wireless fields Prefer 15+ years of experience in embedded software development Must have strong Wi-Fi AP product knowledge with good understanding of Wi-Fi standards Must have hands on experience in architecture/design/development of advanced Wi-Fi features of WiFi6/6E/WiFi7 standards Must have good understanding of chip vendor firmware/target SDK and high-level architecture Must have architected/developed modules or in embedded RTOS and/or Linux kernel environment Should be able to work in a fast-paced environment Should be good mentor, capable building strong technical team focused innovation Must be eager to drive and push the boundaries of technology to achieve best in class solution

Job Area: Engineering Group, Engineering Group > Systems Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Systems Engineer, you will research, design, develop, simulate, and/or validate systems-level software, hardware, architecture, algorithms, and solutions that enables the development of cutting-edge technology. Qualcomm Systems Engineers collaborate across functional teams to meet and exceed system-level requirements and standards. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Systems Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Systems Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. Come and join the team that is pushing the envelope and doing foundational R&D for next generation wireless technology! You will be researching, designing, and implementing SW/FW to enable the advanced Wireless WAN features and end-to-end solutions with a focus on layer-1 (PHY layer) functions. This position will expose you to Qualcomms innovative SOC, DSP, Baseband, RF as well as the latest FPGAs and compute platforms in the industry. Minimum Required Skills: Bachelor's degree in computer engineering, Computer Science, Electrical Engineering or related field. 3+ years of Software Engineering on Embedded Platform 3+ years of experience with programming languages such as C, C++, Python , etc. Experience implementing wireless protocols (e.g. 5G/LTE, Wi-Fi ) in Layer 1 (PHY and RF) Preferred Skills Wireless Communication and Digital Signal Processing Theory Knowledge of Operating systems and computer architecture Knowledge of Software architecture and processes Prior experience in DSP Processor Programming (e.g. Tensilica DSP) Prior experience in working with large code base, SW implementation/debugging in a embedded platform Ability to work in a fast-paced dynamic team environment Applicants :Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies :Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Client Summary: This position is for our partner MGT ( www.mgt.us ), a $440M US-based national technology and advisory solutions leader serving state, local government, education (SLED) and targeted commercial clients across the U.S. Their specialized solutions solve the most critical issues that live at the top of clients leadership agendas. MGT partners to help clients build resilience, implement systematic change and strengthen their foundations, now and for the future. Job Summary: MGT is seeking a Systems Engineer III Wireless Subject Matter Expert (SME) with extensive wireless project experience to lead and support enterprise-level wireless network deployments. This role requires an expert-level understanding of wireless networking technologies, the ability to articulate and execute project plans, and the expertise to document and establish best practices for wireless solutions. Key Responsibilities: Wireless subject matter expert (SME) for large scale enterprise-wide network initiatives. Lead wireless project kickoffs, design meetings, deployment planning, implementation, and final documentation preparation. Clearly articulate technical aspects of wireless projects from inception to completion. Demonstrate recent experience in designing, deploying, and managing wireless networks for large-scale enterprise environments. Provide expertise in one or more wireless solution sets, including Cisco, Aruba, and Juniper. Develop best practice documentation for implementing wireless solutions, ensuring standardization and optimization. Perform network design, troubleshooting, and capacity planning for HPE/Aruba, Cisco, Meraki, and Juniper local and cloud-managed wireless networks. Collaborate with stakeholders to ensure seamless integration, security, and performance of wireless infrastructure. Proactively monitor wireless network performance, utilizing Cisco Meraki Cloud, HPE, Aruba, and Juniper network management tools. Minimum Qualifications, Skills, and Experience: Bachelors degree in Information Technology, Computer Science, or equivalent experience 7+ years of experience as a wireless network engineer, with a strong track record of leading and executing complex wireless deployments Expertise in Wi-Fi protocols (IEEE 802.11) and networking protocols, including DNS, DHCP, RADIUS, TCP/IP, UDP, OSPF, BGP, MPLS, VPN, ACLs, and LDAP. Proven ability to clearly articulate and present technical concepts related to wireless solutions Experience conducting and analyzing Wi-Fi surveys using tools such as Ekahau Strong understanding of wireless security best practices, including 802.1x authentication and identity management solutions (Cisco ISE, Aruba ClearPass, or Microsoft NPS) Demonstrated experience creating and implementing best practice documentation for enterprise wireless solutions Excellent project management skills, including planning, implementation, testing, and documentation of wireless networks Ability to collaborate with internal teams, external vendors, and project stakeholders to ensure seamless network operations and client satisfaction Experience in a customer-facing role, providing excellent service and support to clients Strong communication skills, with the ability to convey information clearly and effectively to diverse audiences Preferred Qualifications, Skills and Experience: Cisco Certified Networking Professional (CCNP) or equivalent manufacturer certifications (Aruba, HPE, Juniper) Why Join Us? You will benefit from a great culture and environment that contributes to your career growth. Benefits include hybrid work mode, 5-day workweek , and comprehensive insurance coverage, including Mediclaim, healthcare, and term insurance. How to Apply? Send your resume to: nikita.salian@learningmate.com Application Deadline: 6th April,25 Acknowledgement: We are an equal opportunity employer. We commit to celebrate diversity, equity, and inclusion in the workplace.

4 -6Years exp in mobile app development on Android / IOS platform. Strong programming skills in MAUI, Xamarin. Exp in .Net technologies - .Net standard, C# .Net. Exp in databases such as MS SQL, SQL lite Required Candidate profile Working knowledge of Google Play store/Apple App store publishing procedures. Exp in Git, Azure DevOps. Exp in BLE, NFC, Wireless protocols is a plus. Exp in developing industrial application is plus.

Job Area: Engineering Group, Engineering Group > Systems Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Systems Engineer, you will research, design, develop, simulate, and/or validate systems-level software, hardware, architecture, algorithms, and solutions that enables the development of cutting-edge technology. Qualcomm Systems Engineers collaborate across functional teams to meet and exceed system-level requirements and standards. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Systems Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 1+ year of Systems Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field. Come and join the team that is pushing the envelope and doing foundational R&D for next generation wireless technology! You will be researching, designing, and implementing SW/FW to enable the advanced Wireless WAN features and end-to-end solutions with a focus on layer-1 (PHY layer) functions. This position will expose you to Qualcomms innovative SOC, DSP, Baseband, RF as well as the latest FPGAs and compute platforms in the industry. Minimum Required Skills: Bachelor's degree in computer engineering, Computer Science, Electrical Engineering or related field. 3+ years of Software Engineering on Embedded Platform 3+ years of experience with programming languages such as C, C++, Python , etc. Experience implementing wireless protocols (e.g. 5G/LTE, Wi-Fi ) in Layer 1 (PHY and RF) Preferred Skills Wireless Communication and Digital Signal Processing Theory Knowledge of Operating systems and computer architecture Knowledge of Software architecture and processes Prior experience in DSP Processor Programming (e.g. Tensilica DSP) Prior experience in working with large code base, SW implementation/debugging in a embedded platform Ability to work in a fast-paced dynamic team environment Applicants : Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies : Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Experience in Wireless Networking Testing, Wi-Fi Direct, Mobility testing and installation of different access point routers. Experience in testing using Wireless protocols (Wi-Fi 6, WPS, WEP, WPA, WPA2, WPA3, AES,

Experience in Wireless Networking Testing, Wi-Fi Direct, Experience in testing using Wireless protocols (Wi-Fi 6, WPS, WEP, WPA, WPA2, WPA3, AES, TKIP, Enterprise server configuration - LEAP, PEAP, EAP-TLS)