Home
Jobs

895 Usb Jobs - Page 10

Filter
Filter Interviews
Min: 0 years
Max: 25 years
Min: ₹0
Max: ₹10000000
Setup a job Alert
JobPe aggregates results for easy application access, but you actually apply on the job portal directly.

2.0 - 6.0 years

13 - 17 Lacs

Bengaluru

Work from Office

Naukri logo

Job Details: : Embedded Controller (EC) is critical platform hardware manages platform power sequencing, battery, keyboard, USB Type-C policies, CPU / Graphics fan speed control, CPU and platform sensors thermal monitoring. In this role, Engineer will develop firmware for embedded microcontrollers. Willingness for platform firmware features contribution, debug the issues and integration of end-to-end subsystem solutions. Engineer will engage with cross functional teams like Type C, BIOS, board Design, platform validation and tools teams, third party hardware and software vendors, OS vendors and customers in gathering and analyzing EC requirements, drive tech readiness, define a feasible, modular, reusable and scalable solutions. Responsibilities will include but not be limited to working closely with the Architects to analyze new subsystem software requirements, architecture, and define the execution plan aligned to platform milestones. Lead the platform execution by defining a detailed integration plan, and drive alignment with stakeholders. Participate in Program management forums like PSXT and PXT and update the status/represent the team. Discuss technical details and close opens in technical forums like work group and Architectural meeting. Leading and contributing to EC subsystem software solutions at a platform level. Own and drive platform PO/feature bring-up, mapping of functional requirements to test Case, work with IP teams (SW/HW), feature enablement, hand-on debug of failures and co-ordinate with partners to root cause and resolve issues, work with platform validation teams for scale out validation. The role of a Firmware development engineer includes but is not limited to Develops embedded software within environments that have constrained timing and memory resources Designs and implements reusable code. Performs design and code reviews. Creates unit and integration tests to verify quality of code product implementation. Working closely with Type C, BIOS, and board design engineers to debug challenging issues that span domains. Qualifications: Minimum qualifications are required to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.Minimum Qualifications: BS/Btech or MS/M.Tech in computer science, Electronics or Electrical engineering with minimum 4+ years of experience in product development. Experience in C/C++ programming Strong system software/Firmware experience in RTOS based systems with hands on experience in RTOS foundation and BSP framework Device driver and middleware development, integration, debugging for sub-systems that span multiple horizontal and vertical layers Working knowledge and hands on experience in Zephyr RTOS is preferred Preferred Qualifications: Demonstrated technical leadership in delivering complex EC subsystem use cases and features to customers - Excellent understanding of EC functionalities as mentioned above. Strong written and oral communications skills to influence and collaborate across a range of audiences in business and technical groups. Proven experience working through the full product cycle from initial design to final product. Demonstrated familiarity with Intel Core and Atom SoC architecture and platform technologies is a plus. Must be a good team player with results-oriented mindset. Job Type: Experienced Hire Shift: Shift 1 (India) Primary Location: India, Bangalore Additional Locations: Business group: The Client Computing Group (CCG) is responsible for driving business strategy and product development for Intel's PC products and platforms, spanning form factors such as notebooks, desktops, 2 in 1s, all in ones. Working with our partners across the industry, we intend to deliver purposeful computing experiences that unlock people's potential - allowing each person use our products to focus, create and connect in ways that matter most to them. As the largest business unit at Intel, CCG is investing more heavily in the PC, ramping its capabilities even more aggressively, and designing the PC experience even more deliberately, including delivering a predictable cadence of leadership products. As a result, we are able to fuel innovation across Intel, providing an important source of IP and scale, as well as help the company deliver on its purpose of enriching the lives of every person on earth. Posting Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. Position of Trust N/A Work Model for this Role This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site. *

Posted 1 week ago

Apply

0.0 - 2.0 years

4 - 7 Lacs

Mumbai, Palai

Hybrid

Naukri logo

Responsibilities: 1. Ability to understand the Testing requirements and bring up appropriate test plans, test reports, quick prototypes 2. Ability to write the firmware for Test out the Electronics Components. 3. Coordination with different teams to meet the product requirements Requirements & Skills: Must to have: 1. Experience with linux environment 2. Familiar with basic linux commands such as cp, rm, mv etc.. 3. Familiar with rpi environment 4. Hand-on experience in hardware implementation of embedded communication protocols such as 1-wire, I2C, SPI, UART, USB, I2S 5. Develop test environments and test cases for all mechanical and Electronics systems 6. Worked with any of the following such as Wi-Fi, Microphone, Battery, LCD, Display, Amplifier, Speaker. 7. Familiar with testing of various hardware platforms specific to audio front end such as DSP, Amplifier, Speakers, Microphones 8. Build automated testing systems for regular checks 9. Work with cross-functional teams to complete the assigned job duties within deadlines. 10. Understand and interpret drawings, schematics, technical manuals and instructions. 11. Work with Supervisors to plan and coordinate test activities. 12. Review test procedures and instructions before starting the system testing processes Good to have: 1. Strong communication and documentation skills and ability to operate independently. 2. Knowledge about Wi-fi/Bluetooth/RF/ Antenna Technologies is a plus. 3. Experience of designing hardware schematic 4. Familiar with MIPI Camera & display Modules and their communication protocols & AP Interface. 5. Experience in working with embedded linux environments 6. Diverse experience in microcontroller/ microprocessor based circuit design and bring-up. Ideally from ST/TI/NXP/Renesas and sensor interface on PCBA level.

Posted 1 week ago

Apply

12.0 - 17.0 years

40 - 45 Lacs

Bengaluru

Work from Office

Naukri logo

Boeing India Engineering has an immediate opening for an Engineering Manager Digital Circuits , who will be responsible for development and management of engineers in India to perform engineering work-statements for Boeing product life cycle management. This position will work collaboratively with the teams from across the globe in an integrated design environment to help deliver engineering statement of work. The selected individual will develop and handle Engineers, interact with the program leaders from across the globe, with a vision to grow ownership in execution with their team. This position will be in Bengaluru, India , and will be reporting directly to the Sr. Electronic Manager India. Primary Responsibilities: Manages employees performing engineering and technical activities in the areas of ASIC/FPGA verification and design. Develops and executes integrated departmental plans, policies and procedures and provides input on departmental business and technical strategies, goals, objectives. Acquires resources for department activities, provides technical management of suppliers and leads process improvements. Develops and maintains relationships and partnerships with customers, stakeholders, peers, partners and direct reports. Provides oversight and approval of technical approaches, products and processes. Provides project/Activity planning, and key milestone tracking. Manages post silicon debug support activities for validation, SW development and Test Team. Manages directly (including people reporting) the RTL, DV and DFT primarily. Integrated PD and Emulation activities Understand complex protocols and create implementable objectives for team, Protocols would include PCIe, ARINC, MIL 1553, USB, I2C and other proprietary protocols related to space and flight systems Manages, develops and motivates employees along with functional capability planning. Build capability and capacity upon SV & UVM. Nurture directed test case scenarios using VHDL and similar platforms. Should have strong verbal and written communication skills. Basic Qualifications (Required skills/experience): A Bachelors degree or higher is required as a BASIC QUALIFICATION Bachelor Degree from an accredited course of study in electrical engineering, computer science, mathematics, or physics is required At least 12 years of experience in Digital IC design and verification, involved in atleast 3 Chip Tape outs or equivalent. Proficient in tools such as Vmanager and similar tools with other EDA vendors to track and maintain verification workflow metrics for the team. Proficient in concepts such as cross domain clock sync, polymorphism. Proficient in validating the verification workflow with available limitations on tools and resources to provide maximum functional coverage on priority. Demonstrated success leading development efforts, including project management and earned value tracking. Preferred Qualifications (Desired skills/experience): Experience leading or managing in an engineering organization. Familiarity with FAA DO-254 certification. Familiar with Emulation and Safety Flow Analysis Familiar in Formal Verification techniques Familiar in Design Concepts US Person as defined by 22 C.F.R 120.15 is advantageous. Familiar with LOR verification based VCRM structure Typical Education & Experience: Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 13 to 16 years' related work experience or an equivalent combination of education and experience (e.g. Master+12 years of related work experience etc.)

Posted 1 week ago

Apply

5.0 - 10.0 years

11 - 15 Lacs

Bengaluru

Work from Office

Naukri logo

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity s R&D/Product Development Engineering Teams conceive original ideas for new products, introduce them into practice. They are responsible for product development, and qualification from market definition through production and release; assist in the qualification of suppliers for new products to ensure suppliers deliver quality parts, materials, and services for new or improved manufacturing processes; conduct feasibility studies, testing on new and modified designs; direct and support detailed design, testing, prototype fabrication and manufacturing ramp. The R&D/Product Development Engineering Teams provide all required product documentation including, but not limited to, Solid Model, 2D/3D production drawings, product specifications, and testing requirements. They create and modify detailed drawings and drafting or conceptual models from layouts, rough sketches or notes and contribute to design modifications to facilitate manufacturing operation or quality of product. Typical fields of expertise includematerials, mechanics and systems, electrical, optics, chemistry, software, automation systems, packaging, testing and measurement, and manufacturing of electrical, mechanical and electronic components, products, and their integration into systems. KEY RESPONSBILITIES: Minimum of 5+ years of work experience in a signal integrity engineering role or related experience Minimum of 3+ years of work experience in connector development - Experience with interconnect design or experience with connector &/or cable/cable assembly design (high speed twinax cables, direct attach copper (DAC) cables) Demonstrated experience using Signal integrity analysis tools (Agilent ADS, Ansys HFSS or equivalent, 3D modeling tools) and testing equipment (including VNA, TDR and BERT). A solid understanding of statistical analysis and AI training. A solid understanding of SI knowledge, including electromagnetic theory and electrical circuit behavior Strong analytical capabilities to interpret simulation and lab data to identify issues and provide solutions to fix identified problem. Familiarity with printed circuit board design, fabrication and assembly. Familiar with material, manufacturing process, and manufacture inspection. Familiar with at least one programming language, such as Matlab, python, C++, VB, etc. Excellent verbal and written communication skills Ability to work in a global environment - able to accommodate varying time zones, fluent in English (verbal/written), able to collaborate with individuals across geographies Solid presentation skills with an ability to clearly communicate technical concepts to diverse audiences in English Individual must be highly motivated, a quick learner, and able to work independently Competencies Location

Posted 1 week ago

Apply

2.0 - 5.0 years

18 - 20 Lacs

Bengaluru

Work from Office

Naukri logo

Job Description In this position, the individual will be responsible for Designing, implementing, debugging firmware for the next generation storage devices (SD, USB, SATA). Typical activities involve the design and implementation of data structures, software algorithms, data path, and implementation of storage interface protocols, such as UFS, to deliver future cutting-edge storage products. You will develop firmware using multiple environments that include SW simulations, FPGA boards, and of course the final product HW. You will work in an Agile environment with advanced CI tools and capabilities that help develop clean code fast. You will work closely with excellent colleague engineers in Israel and India, cope with complex challenges, innovate, and develop products sold to leading mobile and automotive OEMs for millions of devices across the globe. Qualifications B.Tech. in Computer Science or Software / Computer / Electrical Engineering 2+ years of experience in RT / embedded systems and C development Previous RTOS experience - advantage (e.g. ThreadX / MQX / Nucleus / VxWorks / Embedded Linux) Experience in ARM or ARC processors family, debugging environments and tools NAND flash fundamentals Capable of developing wide system view for complex embedded systems Excellent interpersonal skills and team player Fast learner and implementer Great communication skills and fluent English, both verbally and written, and an ability to collaborate across cultural and organizational boundaries.

Posted 1 week ago

Apply

3.0 - 6.0 years

4 - 8 Lacs

Hyderabad, Ahmedabad

Work from Office

Naukri logo

Robert Bosch Engineering and Business Solutions Private Limited is looking for System Engineer_ SDS/BSV- ENG_ QCOM to join our dynamic team and embark on a rewarding career journey. Analyzing system requirements and specifications. Designing and implementing computer systems and network architecture. Installing, configuring, and maintaining system hardware and software. Monitoring and optimizing system performance and capacity. Ensuring security and data protection for the organization's systems. Providing technical support and troubleshooting for users and other stakeholders. Collaborating with other teams, such as development and operations, to ensure system integration and efficiency. Developing and implementing disaster recovery and business continuity plans. Maintaining documentation for systems, processes, and procedures. Strong technical background, excellent problem- solving skills.

Posted 1 week ago

Apply

3.0 - 8.0 years

4 - 8 Lacs

Hyderabad, Ahmedabad

Work from Office

Naukri logo

Robert Bosch Engineering and Business Solutions Private Limited is looking for Embedded Developer_ SDS/BSV- ENG_ QCOM to join our dynamic team and embark on a rewarding career journey. The Embedded Developer is responsible for designing, developing, and testing software and firmware for embedded systems. This role involves working closely with hardware engineers to develop software that controls and interacts with embedded devices. The Embedded Developer writes efficient and reliable code, conducts debugging and troubleshooting, and ensures the functionality, performance, and security of embedded systems. Responsibilities : Embedded Software Development : Collaborate with hardware engineers to define software requirements and specifications for embedded systems. Design and develop embedded software and firmware using programming languages such as C, C++, or assembly language. Write clean, efficient, and reliable code for controlling and interacting with hardware components. Implement and integrate device drivers, protocols, and communication interfaces for seamless operation of embedded systems. Optimize software performance and memory usage to meet system constraints. System Integration and Testing : Conduct integration of software and firmware components with the hardware platform. Perform unit testing, integration testing, and system- level testing to ensure functionality, reliability, and performance. Debug and troubleshoot software and hardware issues, identifying and resolving bugs and malfunctions. Conduct code reviews and collaborate with the development team to improve software quality and maintainability. Stay updated with industry trends and emerging technologies related to embedded systems development. Hardware- Software Collaboration : Collaborate with hardware engineers in the selection and evaluation of hardware components for embedded systems. Provide input and recommendations for hardware design improvements to optimize software performance and functionality. Work closely with cross- functional teams to ensure seamless integration of software and hardware components. Participate in design reviews and technical discussions to align software and hardware requirements. Documentation and Version Control : Create and maintain technical documentation, including software requirements, design specifications, and user manuals. Use version control systems to manage and track software changes and ensure proper versioning. Document and communicate software architecture, interfaces, and APIs to facilitate collaboration with other developers. Compliance and Quality Assurance : Ensure compliance with industry standards, regulations, and best practices related to embedded systems development. Implement security measures and best practices to protect embedded systems from vulnerabilities and threats. Collaborate with quality assurance teams to develop and execute software testing strategies and ensure software reliability. Support the resolution of customer- reported issues and provide technical assistance when needed. Qualifications : Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field. Proven experience in embedded software development, firmware development, or a similar role. Proficiency in programming languages such as C, C++, or assembly language. Strong understanding of embedded systems architecture, hardware- software interactions, and real- time operating systems. Knowledge of microcontrollers, microprocessors, and hardware peripherals commonly used in embedded systems. Familiarity with communication protocols (e. g. , UART, SPI, I2C), device drivers, and embedded system debugging tools. Experience with embedded software development tools, integrated development environments (IDEs), and debuggers. Understanding of software testing methodologies, unit testing frameworks, and software debugging techniques.

Posted 1 week ago

Apply

4.0 - 8.0 years

8 - 12 Lacs

Hyderabad, Ahmedabad

Work from Office

Naukri logo

Robert Bosch Engineering and Business Solutions Private Limited is looking for Lead Embedded Software Developer_ SDS/BSV- ENG_ QCOM to join our dynamic team and embark on a rewarding career journey. Team Leadership : Lead and mentor a team of embedded software developers, providing technical guidance, support, and fostering a collaborative work environment. Technical Strategy : Define the technical direction, architecture, and software design principles for embedded systems projects. Embedded Software Development : Design, code, and test embedded software solutions for real- time systems, devices, and applications. System Integration : Collaborate with hardware engineers and other cross- functional teams to ensure seamless integration of software with hardware components. Coding Standards : Establish and enforce coding standards, best practices, and quality assurance measures for the development team. Project Management : Manage software development projects, including task assignment, timeline management, and progress tracking.

Posted 1 week ago

Apply

4.0 - 8.0 years

9 - 13 Lacs

Hyderabad, Ahmedabad

Work from Office

Naukri logo

Robert Bosch Engineering and Business Solutions Private Limited is looking for Lead Embedded Systems Test Engineer_ SDS/BSV- ENG_ QCOM to join our dynamic team and embark on a rewarding career journey. Develop, design, and test low- level device drivers for embedded systems. Develop and maintain device driver documentation, including specifications, test plans, and reports. Integrate hardware and software systems. Collaborate with other team members to design and implement embedded systems. Provide technical support for product development teams. Experience in embedded systems development and low- level driver development. Excellent communication and teamwork skills.

Posted 1 week ago

Apply

7.0 - 12.0 years

40 - 45 Lacs

Bengaluru

Work from Office

Naukri logo

The right engineer will drive the success of power IP (Intellectual Property) and features in AMD (Advanced Micro Devices) products through leadership & coordination, resolution of technical dependencies, and achievement of schedule commits. This is a high-visibility and widely multi-functional role, spanning pre-silicon architecture to post-silicon implementation & product delivery. THE PERSON: Your curiosity will drive your learning and innovation to improve how we as a group, and an organization, can get better every day. Your peers will provide you a results-oriented and encouraging environment for your career growth, fueling your opportunity to be a part of Delighting Our Customers. KEY RESPONSIBILITIES: Develop, customize, and maintain bootloaders (primarily U-Boot). Port, configure, and debug the Linux Kernel on embedded hardware platforms. Diagnose and resolve complex Linux kernel crash issues using industry-standard tools (eg, crash dump analysis, kernel logs). Design, develop, and debug Linux kernel device drivers (eg, I2C, SPI, PCIE, USB, UART, GPIO, etc). Develop and maintain Root File Systems tailored for embedded products (using tools like Yocto, Buildroot, or custom scripts). Design and implement embedded application software running on top of embedded Linux. Perform build system integration and automation (eg, integrating kernel, drivers, applications, and filesystems into cohesive builds). Collaborate closely with hardware, QA, and systems teams for end-to-end product development. Participate in code reviews, documentation, and continuous improvement initiatives. Developed software for embedded applications. PREFERRED EXPERIENCE: Software design and development Strong proficiency in C and C++ programming for embedded systems. Solid understanding and experience with bootloaders (especially U-Boot customization and porting). In-depth knowledge of Linux kernel architecture, configuration, and debugging. Hands-on experience with kernel crash debugging (eg, crash logs, kdump, gdb). Experience in developing and debugging Linux kernel device drivers. Expertise in working with Root Filesystems and embedded distributions. Familiarity with build systems such as Yocto, Buildroot, or custom makefiles. Practical knowledge of embedded system constraints (memory, CPU, power). Familiarity with version control systems (eg, Git). Implementing development of kernel mode device drivers, Embedded application SW, Linux OS integration, memory management, peripheral driver integration Working experience in various protocols like Ethernet, PCIe, I2C, SPI, USB, RS232 Good Problem-solving skills Strong debugging & troubleshooting skills. Good oral & written communication skills Ability to work independently, excellent interpersonal and teamwork skills ACADEMIC CREDENTIALS: Bachelor/Postgraduate in Engineering IT, CS, ECE & EEE or Equivalent At least seven or eight years of experience in developing SW for embedded systems.

Posted 1 week ago

Apply

5.0 - 10.0 years

7 - 11 Lacs

Bengaluru

Work from Office

Naukri logo

SPAN s Device Software team is responsible for all of the software that is physically embodied in our hardware products. Our first product - the SPAN Panel - contains a complex network of microcontrollers and a single board computer that must work together to react quickly to changing conditions with impeccable reliability in order to perform its job. We look for friendly, excellent engineers who enjoy working with their peers to solve complex problems and prioritize trusting that the people we hire are capable of great things when we'll supported. Engineers work directly with the broader software, product, and hardware teams to ensure the right things get built at the right time. As an engineer on the Device Software team you will define and implement new features directly related to SPAN s hardware products focusing on the lowest level - the microcontroller. This includes everything from bootloaders on systems without an OS up through applications in C and C++ inside an RTOS. Hardware products are central to SPAN s business and writing firmware for even our smallest microcontrollers means working on something that directly impacts the user experience. You will own large user-facing features from conception through implementation on future hardware products, working independently to bring them to completion. Responsibilities Designing an OTA system that encompasses a variety of communication interfaces, processor types, and products, while achieving both secure goals for hardware-backed encryption and verification and high reliability. Working with system architects to invent a data steaming architecture for a new product family which can satisfy both the needs of the data science team to access high rate and quality data, as we'll as safety guarantees around consistency and accuracy. Representing the Device Software team in group settings and evangelizing engineering best practices. Participating in code and design reviews as we'll as authoring documents which further reinforce these goals, and supporting engineers across the org in hitting them. We are seeking a Firmware/Embedded Linux engineer with: 5 or more years of experience writing software for a hardware device (on a microcontroller, and/or in Linux, etc) in C++ or C Strong fundamentals in modern software design with tools like Object-Oriented design, coupled with awareness of concerns like manual memory management Experience working with standard electrical communication interfaces like UART, I2C, USB, etc Exceptional interpersonal communication and collaboration skills. Great at building trust and driving decisions to a resolution Track record of taking ownership over projects and willingness to help others with theirs, from design and code review through to mentorship of new employees Bonus Qualifications Experience with the STM32 microcontroller family Experience with functional safety and processes and standards like UL 60730, ISO 26262, IEC 61508, and UL 1998 Experience writing higher level system or application software such as diagnostic command line tools or the application side of a communication interface Wireless technologies like WiFi, Bluetooth and Zigbee Hands-on experience with electronics lab equipment Clean energy hardware in a multidisciplinary environment

Posted 1 week ago

Apply

5.0 - 10.0 years

5 - 9 Lacs

Bengaluru

Work from Office

Naukri logo

SPAN s Strategic Firmware team is responsible for the full lifecycle of new strategic products, features, and integrations. We are focused on quickly building minimum viable solutions that will help unlock market segments and increase sales. We look for friendly, motivated engineers who enjoy working with their peers to drive impact and move the business forward. Engineers on this team work directly with the broader cross-functional strategic team including product, mobile software, cloud software, and hardware. As a Senior Firmware Engineer you will have the opportunity to be the engineering owner for new strategic initiatives that impact any of our hardware components from microcontrollers up through application stack in embedded Linux. This can include everything from bootloaders on systems without an OS up through applications in C and C++ inside an RTOS, to system services and applications written in Rust and Python in embedded Linux. Hardware products are central to SPAN s business and writing firmware for even our smallest microcontrollers means working on something that directly impacts the user experience. Responsibilities Integrations with smart networked third party home energy devices: work across teams to define MVP, manage external partners, define architecture, and lead the implementation The regulatory frameworks that govern our electrical systems and devices are updated from time to time. In some cases, changes here may create market demand for electrical products. To unlock new markets, we may work with our product and certification teams to design new features or capabilities and lead the implementation. We are always looking for ways to bring additional value to our customers and the strategic team is generally responsible for delivering these products and features. For example, a new SPAN Drive charge mode may help customers save on their electricity bills and get more out of their existing solar panels. We are seeking a Firmware/Embedded Linux engineer with: 5 or more years of experience writing software for a hardware device (on a microcontroller, and/or in Linux, etc) in C/C++, Rust, and/or Python Strong fundamentals in modern software design coupled with awareness of concerns like manual memory management Experience working with standard electrical communication interfaces like UART, I2C, USB, etc Exceptional interpersonal communication and collaboration skills. Great at building trust and driving decisions to a resolution Track record of taking ownership of projects and willingness to help others with theirs, from design and code review through to mentorship of new employees Bonus Qualifications we'do not expect any engineer to have all skills, but we'do want you to be excited to learn and grow. Every Device Software Engineer is free to roam up and down our device software stack, so any combination of the following skills is welcome but not required. Experience with the STM32 microcontroller family Experience with functional safety and processes and standards like UL 60730, ISO 26262, IEC 61508, and UL 1998 Experience writing higher level system or application software such as diagnostic command line tools or the application side of a communication interface Wireless technologies like WiFi, Bluetooth and Zigbee Hands-on experience with electronics lab equipment Experience with clean energy hardware in a multidisciplinary environment

Posted 1 week ago

Apply

6.0 - 10.0 years

2 - 5 Lacs

Shaikpet

Work from Office

Naukri logo

Job Information Job Opening ID ZR_2401_JOB Date Opened 09/11/2024 Industry Semiconductor Job Type Work Experience 6-10 years Job Title Hardware design Engineer City Shaikpet Province Telangana Country India Postal Code 500033 Number of Positions 1 Roles & Responsibilities Supporting in development of new product, re-design and value engineering of existing products. Execute VAVE study and identify the cost out opportunities which are quality neutral. Design schematic of digital, mix signal & power electronics circuits to meet the requirement. PCBA prototyping, board bring-up and test, debug. Create the design documents, validation and test plan mapping to the requirements. Provide detailed requirement for FCT of PCBA to make sure meet design requirement.Essential Skills: AnalogPrecision amplifiers, Thermocouples and RTD, Pressure and flow sensors, High speed ADC and DAC. PowerLDOs, Switching regulators, High voltage circuits and AC-DC converters. Communication/Data interfaceSPI, I2C, LVDS, USB, Ethernet ProcessorARM processor family, FPGA and CPLD Component EngineeringComponent life cycle and RoHS, Reach compliance. Full time experience in digital and analog hardware design with advanced microcontroller, FPGA/CPLD, high speed ADC and DAC. Good experience with PCBA process and board bringup. Strong knowledge in alternate design analysis/part substitute for cost out ideas including design analysis for functional, quality and reliability. Experience in practices for Design for Test (DFT) and Design for Manufacturing (DFM). Proficient in test and debugging instruments like DSO, logic analyzer, spectrum analyzer and EMI/EMC test simulators. Hands on experience on EDA Tools like Altium, OrCAD and Mentor Graphics etc.Qualification/sBE/BTech or MTech / ME in Electrical / Electronics Engineering or similar check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Posted 1 week ago

Apply

6.0 - 10.0 years

2 - 6 Lacs

Hyderabad

Work from Office

Naukri logo

Job Information Job Opening ID ZR_2041_JOB Date Opened 28/10/2023 Industry Technology Job Type Work Experience 6-10 years Job Title Sr Hardware Engineer City Hyderabad Province Telangana Country India Postal Code 500001 Number of Positions 4 Supporting in development of new product, re-design and value engineering of existing products. Execute VAVE study and identify the cost out opportunities which are quality neutral. Design schematic of digital, mix signal & power electronics circuits to meet the requirement. PCBA prototyping, board bring-up and test, debug. Create the design documents, validation and test plan mapping to the requirements. Provide detailed requirement for FCT of PCBA to make sure meet design requirement.Qualifications:BE/BTech or MTech / ME in Electrical / Electronics Engineering (No Diplomaholder).Essential Skills: AnalogPrecision amplifiers, Thermocouples and RTD, Pressure and flow sensors, High speed ADC and DAC. PowerLDOs, Switching regulators, High voltage circuits and AC-DC converters. Communication/Data interfaceSPI, I2C, LVDS, USB, Ethernet ProcessorARM processor family, FPGA and CPLD Component EngineeringComponent life cycle and RoHS, Reach compliance. Full time experience in digital and analog hardware design with advanced microcontroller, FPGA/CPLD, high speed ADC and DAC. Good experience with PCBA process and board bringup. Strong knowledge in alternate design analysis/part substitute for cost out ideas including design analysis for functional, quality and reliability. Experience in practices for Design for Test (DFT) and Design for Manufacturing (DFM). Proficient in test and debugging instruments like DSO, logic analyzer, spectrum analyzer and EMI/EMC test simulators. Hands on experience on EDA Tools like Altium, OrCAD and Mentor Graphics etcMust Skill :Should have worked on Microcontrollers.Experience with communication interfaces like SPI/I2C/CAN/RS485Should have strong design knowledge on mixed signal design, on board power supply.strong knowledge on EMI/EMC design, debugging and testing. check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Posted 1 week ago

Apply

6.0 - 10.0 years

1 - 4 Lacs

Gurugram

Work from Office

Naukri logo

Job Information Job Opening ID ZR_1720_JOB Date Opened 14/03/2023 Industry Technology Job Type Work Experience 6-10 years Job Title Electronics Engineer City Gurgaon Province Haryana Country India Postal Code 201303 Number of Positions 1 We need an Electronics Engineer to work under the direction of product developers to design new ways of incorporating electronics into our product portfolio. In this role, the person will collaborate with others to offer innovative methods of product development as well as improving existing products. The person will create models and prototypes as well as handle calculations required for manufacturing specifications. The person will test electronics to ensure they function as planned. The person will also be responsible for ensuring that electronics meet the highest standards of safety for our customers. Tasks & Responsibilities: Realization of the development in accordance with the targets defined in the work package with respect to the contents, quality, deadlines and costs of the project Schematic Design Component selection meeting cost and performance Mandatory: Should have experience on Mixed Signal Design, Analog Circuit Design and Digital Circuit DesignShould have experience in working on complete Product Development Life CycleShould have a strong understanding of Signal and power Integrity phenomena and relevant tools.Should have knowledge of working on micro controllers, microprocessors and FPGAs from various industry manufacturers like TI, STM, Qualcomm, Xilinx, Lattice and others.Should have knowledge of communication protocols like SPI, I2C, USB, UART, CAN, Ethernet, Wi-Fi, RS485 a few to mention. check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Posted 1 week ago

Apply

6.0 - 10.0 years

4 - 7 Lacs

Khairatabad

Work from Office

Naukri logo

Job Information Job Opening ID ZR_2322_JOB Date Opened 27/07/2024 Industry Engineering Job Type Work Experience 6-10 years Job Title Sr Hardware Engineer HW design and VAV City Khairatabad Province Telangana Country India Postal Code 500034 Number of Positions 1 Nature of Assignment / Roles & Responsibilities Supporting in development of new product, re-design and value engineering of existing products. Execute VAVE study and identify the cost out opportunities which are quality neutral. Design schematic of digital, mix signal & power electronics circuits to meet the requirement. PCBA prototyping, board bring-up and test, debug. Create the design documents, validation and test plan mapping to the requirements. Provide detailed requirement for FCT of PCBA to make sure meet design requirement. Essential Skills: AnalogPrecision amplifiers, Thermocouples and RTD, Pressure and flow sensors, High speed ADC and DAC. PowerLDOs, Switching regulators, High voltage circuits and AC-DC converters. Communication/Data interfaceSPI, I2C, LVDS, USB, Ethernet ProcessorARM processor family, FPGA and CPLD Component EngineeringComponent life cycle and RoHS, Reach compliance. Full time experience in digital and analog hardware design with advanced microcontroller, FPGA/CPLD, high speed ADC and DAC. Good experience with PCBA process and board bringup. Strong knowledge in alternate design analysis/part substitute for cost out ideas including design analysis for functional, quality and reliability. Experience in practices for Design for Test (DFT) and Design for Manufacturing (DFM). Proficient in test and debugging instruments like DSO, logic analyzer, spectrum analyzer and EMI/EMC test simulators. Hands on experience on EDA Tools like Altium, OrCAD and Mentor Graphics etc. check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Posted 1 week ago

Apply

6.0 - 10.0 years

5 - 8 Lacs

Krishna

Work from Office

Naukri logo

Job Information Job Opening ID ZR_1991_JOB Date Opened 16/06/2023 Industry Technology Job Type Work Experience 6-10 years Job Title Lead Engineer- Hardware City Krishna Province Andhra Pradesh Country India Postal Code 520001 Number of Positions 1 Engineering in ECE or ETC,PCB design using Altium Design Software. Experience in Multi-Layer PCB design,Experience in PCB design with Signal Integrity. Power Integrity and EMI/EMC considerations. Experience in working with Serial protocols such as RS422/485, I2C, SPI, UART etc. Experience in working with Wi-Fi, LoRa and Bluetooth related hardware and antenna selection. Experience in working with Micro controller & Computer Module. Exp in Preparing FEMCA & DFMEA analysis for hardware Design check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

Posted 1 week ago

Apply

15.0 years

0 Lacs

Pune, Maharashtra, India

On-site

Linkedin logo

Basic Function Firmware Development Manager will be an experienced technical manager in successfully executing Agile products/projects with wide experience in dealing with firmware design and development specifically in building firmware for NPDs for smart home IoT products. Development manager to provide technical & functional guidance in terms of architecture, design and development, integration with smart IoT products, best practices and quality standards to be followed by the team of senior technical development team throughout SDLC life cycle. You will be working closely with the global stakeholders, namely business users, customers, product and project managers, in streamlining the delivery of quality products to our end customers. Besides, you will be responsible for offering expert guidance to the stakeholders and business partners as and when required. Apart from your daily responsibilities, you should be able to conduct in-depth analysis/research to identify the root cause of the product issues and solutions to address the same. Moreover, your strong technical background and experience will be beneficial in offering technical support that meets the business needs. Ensure Firmware development for new NPD, enhancement and sustenance of existing software for all products of Kohler under smart home IoT division. Work with other interrelated groups hardware, App Development, Cloud and QA teams throughout SDLC cycle. Participate in support product development and organization initiatives. Relationship and contacts Supervisory Relationships Reports to Head of Electrical and Electronics Engineering Department Education Requirements : Bachelor &/Master of Engineering in Electronics. Preferred type of profiles: Embedded product companies with embedded domain background. Technical Skills 15 to 25 years of embedded software product development experience. Hands-on experience of firmware architecture design embedded operating systems and best practices in embedded product design and development. Excellent in Embedded C and Proficient in C++, C++11 or later. Microcontroller, basic hardware concepts in Microcontroller based system design. Experience in generating formal software and system requirements and specifications. Technical skills hands-on experience 32 bit OR 16-bit (with basic understanding of 32 bit) TFT OR LCD OR LCD controller emWin OR Touch GFX, TFT OR LCD OR LCD controller OR touch panels. RS485, I2C, SPI, UART, Wi-Fi, BLE OR (BACnet Good to have) Hands on experience with the following Communications protocols (e.g., TCP/IP, SPI, I2C, Ethernet, USB, Modbus, CAN, J1939 and MQTT etc.). FREE RTOS/QNX/KEIL/Any other Hands on experience with emulators and debuggers. Experience on handling measurements instruments like DSO, Function generator and multimeter etc. Experience in CI/Cd tool i.e., Jenkin etc. Understanding of electronics hardware e g ADC, PWM, IO interfaces. Knowledge on validation of cloud applications Proficient at evaluating new tools and technologies Thorough understanding of software development lifecycle and familiarity with CMMi model Experience with creating Requirements Traceability Matrix, Process Documents, Test Plans Role And Responsibilities Design, architects, develops, implements, and manages processes to ensure that products meet required specifications for quality, function, and reliability prior to delivery. Leads, mentors and guides technical team. Identifies and sets appropriate quality standards and parameters for products. Communicates quality standards and parameters to product development team, and other appropriate staff. Coordinates product development processes. Identifies and analyzes issues, bugs, defects, and other problems, particularly when problems recur in multiple products; recommends and facilitates solutions to these issues. Reviews client, customer, and user feedback. Maintains compliance with federal, state, local, and organizational laws, regulations, guidelines, and policies. Performs other duties as assigned. Required Skills/Abilities Excellent verbal and written communication skills. Excellent interpersonal and customer service skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Strong supervisory and leadership skills. Proficient with Microsoft Office Suite or related software. Supervisory Responsibilities Hires and trains development staff. Oversees the daily workflow and schedules of the department. Conducts performance evaluations that are timely and constructive. Experience And Education Bachelors or Masters in Electronics or Electronics & Instrumentation or Computer Engineering (similar or higher) Master’s in business administration, Business Management or related field good to have Minimum 10 to 15 years in software engineering focused on architecting, designing and development of embedded software with at least 5 years’ experience in managing and leading agile testing teams. Good to have relevant technical and process certifications. Show more Show less

Posted 1 week ago

Apply

8.0 years

0 Lacs

Bengaluru, Karnataka, India

On-site

Linkedin logo

Job Title Embedded Software Developer Job Description Your role: Design and develop software technological solution, platform or reference Design, Code and Test for embedded systems Participates in determining the system, subsystem, and interfaces between them Validates technology assumptions, evaluates alternatives, and defines functional and non-functional requirements Test and review codes You're the right fit if: This position requires a minimum of a BE/B. Tech or ME/M. Tech in Embedded/Electronics/Computer Engineering or equivalent from an accredited university. Minimum 8 years’ experience in Software Design and development in embedded software/firmware. Experience in Programming language C++. Understanding of Object oriented Experience with RTOS and BareMetal (MUST) based Embedded Software. Preferred knowledge in Linux Environment Device drivers - modification and development Hands-on experience on SPI, I2C, PWM, ADC, DAC, PCIe, I2C, eMMC, USB, UARTs as well as Memory Management, Scheduling, Interrupts and multi-threading Microprocessor/Microcontroller development – Strong Knowledge and working experience on STM etc. microcontrollers (domain knowledge for designs SW, HW) Experience in wireless communications technologies like Bluetooth, NFC, LTE Modem etc. Peripherals such as PCIe, memory interfaces, OS primitives, memory management, scheduling, interrupts, threading Aware of SDLC. Good grasp of Design Patterns/ Multithreading, Code Reviews Experience in Agile SW Development practices; experience in scaled agile framework (SAFe) is preferred Knowledge and application of the following standards and interfaces is preferred communication interfaces (e.g. USB, GPIB, Ethernet, Serial, RS-485, CAN) network standards (e.g. TCP/IP, UDP, Wi-Fi, Bluetooth, NFC) Knowledge of Software/Firmware testing methodologies. How We Work Together We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week. this role is an office role. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others. Learn more about our business. Discover our rich and exciting history. Learn more about our purpose. If you’re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion here. Show more Show less

Posted 1 week ago

Apply

0 years

0 Lacs

Bengaluru, Karnataka, India

On-site

Linkedin logo

Description As a Electrical Validation Engineer, you will be part of Validation team that is exploring new hardware designs to improve our devices. In this role, you will create, define and develop electrical validation environment and test suites. You will also be responsible for the development of methodologies, execution of validation plans, debug of failures and follow up to closure. Key job responsibilities Role You will work closely with multi-disciplinary groups including Board Design, System Architects, IP developers, and Software Engineering, to verify and deliver complex, high volume SoCs that enable development of world-class hardware devices. In this role, you will: Perform electrical compliance test specifications / compliance test suite for various interfaces and conduct lab measurements Work on high-speed serial I/O interfaces like (LP)DDR4/5, USB, CSI/DSI, HDMI, PCIe interfaces etc. Perform documentation and communicate data across large number of tests and measurement results Drive initiatives to improve process, procedures, and quality of High Speed Characterization at SOC & Product level. Work on schematic and PCB physical design tools to interpret the design and locate physical probe points. Basic Qualifications Bachelor’s degree or higher in EE, ECE, or CS High speed serial interface analog building blocks, protocol, specifications and test methods Writing Python/TCL/PERL code to automate test procedures Good software architecture principles and development practices PCB layout best practices Preferred Qualifications MS/ME in Computer Science, Electrical Engineering, or related field Proficiency in handling High Bandwidth oscilloscopes, BERT, logic analyzers and understanding of probing techniques Understanding of Power & signal integrity concepts such as differential impedance, jitter, insertion loss, return loss, termination, etc. Scripting experience in any programming language (C++, Python, PERL, MATLAB) to develop automation scripts is a plus. Experience in Analog IP Characterization (SerDes, PLL, DDR) is desirable. Familiarity with Transmitter and Receiver design blocks. Understanding of equalization techniques (CTLE/DFE). Good understanding of High-Speed Analog/Digital Circuits, VLSI, semiconductor physics Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Company - ADCI - BLR 14 SEZ Job ID: A2866703 Show more Show less

Posted 1 week ago

Apply

5.0 years

0 Lacs

Mumbai Metropolitan Region

On-site

Linkedin logo

Job Position: Sr. PCB Designer Reporting to: Lead Engineer Job Description Create Schematics using Computer-Aided Design Altium/ Eagle platform tools. Create PCB Circuit layouts and documentation from schematics using Altium/ Eagle tools considering Layer Stack up, Multilayer Board, EMI/EMC checks, High Speed Design etc. Designed up to 8 layers. Worked in Mixed signal, powerboard, RF boards of placement and routing with guidelines. Important High-Speed Interfaces: Processor, DDR3, USB3, MIPI CSI-DSI, EMMC, SDIO and wireless interface antenna Layout Design Worked on protecting high frequency signals and clock signals from interfacing and noise by providing ground guarding Knowledge on Layer Stack-up for Impedance control boards, Power boards and High Speed SOC Board Knowledge on using blind and buried vias. Process PCB , Flex and rigid-flex Circuit layouts for pattern generation, documentation, and Computer-Aided Manufacturing (CAM) files for fabrication and assembly Work closely with Product Design Engineers, Mechanical Engineers, and Designers to produce the optimal PCB and for power supplies distribution layout, and other product circuits Produce and maintain all documentation and engineering drawings for PCB Circuit designs Creating PCB footprints SMD & Through hole as per IPC standards and component library Development. Design Rule check and net list analysis to generate error free net list Incorporate Engineering Change Orders (ECOs) to PCB Circuit designs. Uses tools to calculate dimensions and tolerances to assure function, fit, and manu- facturability of components and assemblies, and performs component research to recommend design alternatives, and contributes to technical designs and documentation. Maintain the record of PCB design and its revision. May perform other duties as assigned Provide support to collaborate with Electronics Manufacturing Service vendors Familiar with communication protocols such as USB, I2C, SPI, UART, I2S and implementation practices of the same on PCB Layout Diverse experience in multicore microcontroller/ microprocessor based circuit design and bring-up. Ideally from ST/TI/NXP/Embedded OS based SOC and sensor interface on PCBA level. Qualification Degree/Diploma holders in Electronics and Telecommunication 5+ years of experience in PCB designing using Altium tool. Hands on experience in Alitum Library Management Good understanding of Electronics part and their packages Good communication skill Show more Show less

Posted 1 week ago

Apply

16.0 years

5 - 9 Lacs

Hyderābād

On-site

PMTS Silicon Design Engineer Hyderabad, India Engineering 65769 Job Description WHAT YOU DO AT AMD CHANGES EVERYTHING We care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences – the building blocks for the data center, artificial intelligence, PCs, gaming and embedded. Underpinning our mission is the AMD culture. We push the limits of innovation to solve the world’s most important challenges. We strive for execution excellence while being direct, humble, collaborative, and inclusive of diverse perspectives. AMD together we advance_ PMTS SILICON DESIGN ENGINEER As a SerDes Verification Architect , you will be responsible for the verification and validation of high-speed SerDes interfaces, including testing data integrity, performance, and protocol compliance. You will work closely with hardware and design teams to ensure that SerDes designs meet the required specifications, operating parameters, and quality standards. Key Responsibilities: Verification of SerDes Designs: Develop and execute verification plans and testbenches for SerDes IPs (Intellectual Property) and subsystems to ensure they meet functional and performance requirements. Testbench Development: Design and implement verification testbenches using industry-standard verification methodologies (e.g., UVM, SystemVerilog, VHDL). Simulation and Debugging: Perform simulations, analyze results, and debug issues related to timing, protocol errors, and other design anomalies in SerDes blocks. Performance Evaluation: Evaluate and validate performance characteristics of SerDes systems including jitter, bit error rates (BER), signal integrity, eye diagrams, and other key metrics. Protocol Compliance Testing: Verify adherence to relevant SerDes protocols such as UCIe , PCIe, Ethernet, USB, DDR, DisplayPort, or custom protocols. Automated Testing: Develop automated regression tests to ensure the robustness and stability of the SerDes design over multiple versions and iterations. Collaboration: Work closely with the design, hardware, and software teams to troubleshoot issues, implement fixes, and verify design changes. Documentation: Create detailed reports and documentation on verification results, test scenarios, and issues found during testing. Verification methodology: Provide feedback for design and verification process improvements and contribute to innovation in verification strategies and methodologies. Experience: 16+ years of experience in SerDes verification or high-speed communication verification. Strong hands-on experience with verification methodologies such as UVM, SystemVerilog, or other simulation-based verification tools. Knowledge of high-speed serial protocols such as UCIe , PCIe, Ethernet, USB, DDR, or custom protocols. Experience in analyzing and interpreting signal integrity issues, jitter, BER, and eye diagrams. Skills: Solid understanding of SerDes architectures, link training, and equalization. Strong debugging skills, with the ability to work across multiple domains (timing, protocol, performance). Familiarity with hardware description languages (HDL) like VHDL or Verilog. Strong analytical, problem-solving, and communication skills. Experience with DDR protocol (e.g., DDR3, DDR4, DDR5) for memory interface verification. Understanding of UCIe protocol and its role in chiplet-to-chiplet communication. Preferred Skills: Experience with Python, Perl, or similar scripting languages for automation. Exposure to high-speed memory interface design and verification, including DDR controller IP verification. Functional coverage, assertions knowledge in SV/UVM. Ability to work in a fast-paced environment and manage multiple verification tasks. Strong team player with good interpersonal and communication skills. #LI-PS1 AMD does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. AMD and its subsidiaries are equal opportunity, inclusive employers and will consider all applicants without regard to age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants’ needs under the respective laws throughout all stages of the recruitment and selection process.

Posted 1 week ago

Apply

3.0 - 6.0 years

0 Lacs

Chennai

On-site

ABOUT APTIV Aptiv is a global technology company that develops safer, greener and more connected solutions, which enable the future of mobility. Headquartered in Dublin, Ireland, Aptiv has 200,000 employees and operates 11 technical centers, manufacturing sites and customer support centers in 50 countries. Visit aptiv.com Today, our mission is to shape the world with more safer, greener and more connected solutions that's changing the world. We are dedicated to bring the next generation of autonomous vehicles, smart cities and connectivity to life. Aptiv Connection Systems, Chennai Engineering Center in Chennai, India established in 2001 catering complete product development solutions right from concept design till validation testing to global OEMs. Located in Chennai city, the southern part of India which is known as automotive hub of India. Role As a embedded Lead, you will support in feasibility study in terms of firmware limitations to finalize the system concepts and designs for products such as electrical centers, PDU’s / BDU’s, DC-DC converter, OBC’s, MCU’s, Wireless chargers etc. You need to collaborate closely with stakeholders in achieving Product requirements. Responsibilities Embedded Firmware PDLC understanding and collaborating with Regional Teams Embedded Coding with Automotive Grade MCUs and MPUs, IO, Memory Mapping. Microcontroller/Microprocessor Clock cycle calculations and Propose improvements. Bootloader and UDS with CAN coding. Unit Testing review and report. Consolidate and analyze Product Software requirements to develop a Prototype and Testing and improvement. Collaborate with Hardware engineers to optimize the design and propose solutions. Embedded Firmware Regression testing. AUTOSAR, ASPICE and CYBERSECURITY Requirements understanding and c FUSA ISO26262 Knowledge and Handling queries from System. Basic Hardware Design with Hardware Design cycle understanding will be part of his role. Qualifications Graduation in Electrical & Electronics / Electronics & Communication Engineering. 3 to 6 years of experience Competence in automotive electronics control function, Micro controllers, Micro processors Skilled with embedded Coding and Reviewing code to standards with Automotive. Proficiency of automotive electronics system is an added advantage (Ie. Bluetooth, USB/SD, Audio/Video, HDMI, CAN/LIN, Network Diagnostic, BCM, BMS, Hybrid, etc); Proficiency of automotive electronic development process. Experience in automotive functional safety development. Modeling and simulation, Android App development experience. High proficiency in English language. Schematic design and electronics components basics selection Knowledge. TRAITS WE SEEK A good communicator, open for challenges, explores full potential to achieve goals. Team player who actively collaborate and contribute to achieve the team goals. Highly motivated and help the team to achieve the goals together. Self-driven and strong passion in achieving results. Highly accountable for the actions and act as owner. Problem solving and analytical thinking, curious to learn continuously and believes in self-development. Go getter and passionate to travels extra mile to bring as part of continuous improvement. Creative in thinking, innovative mindset and does not settle for less. WHAT WE OFFER Competitive compensation with bonus opportunities Competitive health benefits Learning and development environment Innovation opportunities and recognitions Opportunities to collaborate with global talents Privacy Notice - Active Candidates: https://www.aptiv.com/privacy-notice-active-candidates Aptiv is an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, gender identity, sexual orientation, disability status, protected veteran status or any other characteristic protected by law.

Posted 1 week ago

Apply

0 years

0 Lacs

Pune, Maharashtra, India

On-site

Linkedin logo

The Technical Solution Architect for Embedded Product Development will serve as the technical bridge between ACL Digital's engineering capabilities and client requirements. This role combines deep technical expertise in embedded systems with strong client-facing skills to drive business growth in the embedded engineering and product development domain. Key Responsibilities Client Engagement & Relationship Management. Lead technical discussions with prospective clients during the presales process. Conduct technical discovery sessions to understand client challenges and requirements. Present ACL Digital's embedded engineering capabilities to C-level executives and technical decision-makers. Build and maintain relationships with key technical stakeholders at target accounts. Collaborate with business development teams to identify and qualify new opportunities. Solution Architecture & Design: Design comprehensive embedded product development solutions aligned with client needs. Create technical proposals, architecture diagrams, and solution blueprints. Develop proof-of-concepts and technical demonstrations for complex embedded systems. Define project scope, timelines, and resource requirements for embedded development projects. Ensure solutions leverage ACL Digital's chip-to-cloud expertise and system integration capabilities. Technical Leadership & Consultation. Provide technical guidance on embedded systems architecture and design patterns. Advice clients on technology stack selection, platform choices, and development methodologies. Support RFP responses with detailed technical sections and innovative solution approaches. Conduct technical feasibility assessments and risk analysis for proposed solutions. Stay current with emerging technologies in embedded systems, IoT, and semiconductor domains. Technical Skillset: Embedded Systems Engineering Microcontrollers & Processors: ARM Cortex (A53, R5, M4/M3/M0) Controllers/processor family. Real-Time Operating Systems: Embedded Linux, FreeRTOS/Zephyr, Bare-metal development. Hardware Platforms: Experience with NXP, TI, STMicroelectronics, and other leading semiconductor platforms. Communication Protocols: SPI, I2C, UART, CAN, USB, Ethernet, Wi-Fi, Bluetooth, Cellular IoT. Signal Processing: Audio/Video processing, radar signal processing, DSP algorithms. Software Development & Architecture: Programming Languages: C/C++, Python, Assembly language. Development Tools: IAR, Keil, GCC toolchain, JTAG debuggers, Oscilloscope, Logic analyzers. Version Control: Git, SVN, Configuration management practices. Security: Embedded security protocols, cryptography, secure boot, hardware security modules. Technology understanding for various verticals such as IoT, Industrial, Networking etc. Product Development Lifecycle: Requirements Engineering: System requirements analysis, traceability, verification & validation. Design Methodologies: Agile, V-Model, Model-Based Design, concurrent engineering. Testing & Validation: Unit testing, integration testing, HIL testing, automated test frameworks. Compliance & Certification: EMC/EMI, FCC, CE marking, industry-specific certifications. Show more Show less

Posted 1 week ago

Apply

5.0 years

0 Lacs

Noida, Uttar Pradesh, India

On-site

Linkedin logo

5+ Years of Experience in Logic design /micro-architecture / RTL coding Must have hands on experience with SoC design, synthesis and timing analysis for complex SoCs. Experience in Verilog/System-Verilog is a must. knowledge of AMBA protocols - AXI, AHB, APB, SoC clocking/reset/debug architecture and peripherals like USB, PCIE and SDCC. Work closely with the SoC DFT, Physical Design and STA teams Hands on experience in Low power SoC design is required Hands on experience in Multi Clock designs, Asynchronous interface is a must. Experience in using the tools in ASIC development such as DesignCompiler, Genus, FusionCompiler and Primetime is required. Understanding of constraint development and timing closure is a plus. Experience in Synthesis / Understanding of timing concept Show more Show less

Posted 1 week ago

Apply

Exploring USB Jobs in India

The job market in India for USB (Universal Serial Bus) professionals is thriving with opportunities in various industries. USB technology is essential for connecting peripherals to computers and other electronic devices, making it a crucial skill in the tech industry.

Top Hiring Locations in India

  1. Bangalore
  2. Hyderabad
  3. Pune
  4. Chennai
  5. Mumbai

Average Salary Range

The average salary range for USB professionals in India varies based on experience levels. Entry-level positions can expect to earn around INR 3-5 lakhs per annum, while experienced professionals can earn upwards of INR 10 lakhs per annum.

Career Path

A typical career path in the USB skill area may progress as follows: - Junior USB Engineer - USB Developer - USB Architect - USB Specialist - USB Manager

Related Skills

In addition to USB expertise, professionals in this field may benefit from having skills in: - Hardware development - Firmware programming - Embedded systems - Signal processing

Interview Questions

  • What is USB and how does it work? (basic)
  • Can you explain the difference between USB 2.0 and USB 3.0? (basic)
  • How would you troubleshoot a USB connection issue on a computer? (medium)
  • Have you worked with USB debugging tools? If so, which ones? (medium)
  • Describe a project where you implemented USB communication. (medium)
  • What are the advantages of using USB-C over other USB connectors? (advanced)
  • How do you ensure data security when transferring files via USB? (advanced)
  • Can you explain the role of USB in IoT devices? (advanced)
  • How would you optimize USB data transfer speeds? (advanced)

Closing Remark

As you explore job opportunities in the USB field in India, remember to showcase your expertise in USB technology and related skills during interviews. Stay updated with the latest advancements in USB technology to stand out as a top candidate. Prepare well and apply confidently to secure exciting USB roles in the Indian job market.

cta

Start Your Job Search Today

Browse through a variety of job opportunities tailored to your skills and preferences. Filter by location, experience, salary, and more to find your perfect fit.

Job Application AI Bot

Job Application AI Bot

Apply to 20+ Portals in one click

Download Now

Download the Mobile App

Instantly access job listings, apply easily, and track applications.

Featured Companies