717 Pressure Vessels Jobs - Page 13

This includes overseeing the daily operations of maintenance and repair, budgeting, survey schedules, onboard general assessment of vessels, inspections, and docking, etc. Ensure the assigned vessels are technically operational or otherwise managed accordingly to the management agreement requirement. Liaise with vendors and operation/marketing teams on technical and operational readiness. including vessel performance, etc. Perform the assessment for dry-docking, repair quotes and selection of shipyards for repair works, ship maintenance and class special survey etc. Prepare in advance and submit the budgetary costs of dry-docking repairs or class special survey to the seniors and management for approval. Attend to vessel dry-docking, repairs and survey when required and determine repair specifications for dry docking and maintenance. Provide and compile post-evaluation reports and upon completion of dry docking, including summaries of works performed, operational budgets, and actual expenditures. Identify and source for technical and operational supplies required for the vessels and ensure the rates provides the best value. Monitor technical status of vessel with relation to class cert and survey. Monitor scheduled Planned Maintenance are completed effectively. Ensure that all copies of statutory, class and equipment certificates are properly maintained and documented. Provide technical assistance, support and advice to vessel. Perform monthly review of logs processes and attend to vessel inspections. Supervise contractors' repair/maintenance of vessels. Perform budgeting and cost control measures on ship spares and docking requirements. Perform technical compliance audits and investigation on defects/failures on a regular scheduled basis to ensure conformance. Work closely with the HSE Management team to ensure smooth and successful implementation of QHSE system and policies for the Division. Perform systematic review of recommended codes, guidelines and standards and ensure compliance with Quality Safety Management standards. Ensure and maintain vessels' zero loss time accident record and to report all vessel incidents, Near Misses to prevent and eliminate potential incidents. Reports to Technical Fleet Management Department and matrix report to Business Unit Manager. Undertake any other Technical related assignments as and when required. Requirements Must have sailed on board offshore vessels as Chief Engineer or 2nd Engineer or equivalent working experiences. Class 1 or Class 2 COC, D.P. Maintenance Certificate, High Voltage Certificate. Possess relevant sea-going work experience as Chief Engineer/Marine Engineer with minimum class 2 certification or equivalent with in experience in Offshore Supply Vessels, etc. Ability to identify root cause of technical issue, plan and execute recovery actions. Ability to motivate and build strong relationship with both internal and external stakeholders. Possess good organizational and communication skills and hands-on. Able to work under pressure to meet deadlines. Analytical and highly proactive in technical trouble shooting and problem solving. Able to conduct effective stand-up training for vessel crews' ability to travel within short notice as required.

Job Opening: Engineer / Sr. Engineer PPC (Process Equipment Division) Location: Vadodara (Free Transport to Plant Provided) Experience: 15 Years | Education: DME / B.E. / B.Tech Mechanical Engineering Industry type /Preferred: Heavy Fabrication (Vessels, Spools, Heat Exchangers) Key Responsibilities: Project planning & scheduling for process equipment fabrication Raw material & WIP planning, inventory control Coordination with production, QA, purchase & dispatch teams Follow-ups for outsourced/bought-out items Participate in 5S, Kaizen, and ERP implementation Requirements: Experience in heavy fabrication (vessels, tanks, spools) Knowledge of ASME standards Proficient in AutoCAD, ERP/SAP, MS Project Strong coordination, planning & communication skills Perks Benefit : Company transport (Vadodara to Plant) + Medical Insurance Apply Now if youre ready to take on a dynamic planning role in a leading fabrication environment! For Apply share your resume on email id - giplhr@gujaratinfra.com or whatsapp your resume on contact no. +91 8154914106 Feel free to contact for more update.

The Marketing Engineer for Pharma Vessels & Tanks position requires a dynamic individual with 2-8 years of experience in industrial equipment or pharma machinery sales. The role is focused on driving sales and business development within the pharmaceutical, biotech, and chemical industries. The ideal candidate should possess technical knowledge of process equipment, strong marketing skills, and the ability to cultivate and sustain client relationships in the pharma and biotech sector. Responsibilities include identifying and cultivating new business opportunities, promoting and marketing stainless steel vessels, storage tanks, pressure vessels, and process equipment. The Marketing Engineer will engage with OEMs, pharma companies, and process engineers to understand their needs and provide appropriate solutions. Additionally, they will be responsible for conducting product presentations, technical discussions, and demonstrations, as well as collaborating with design and production teams to ensure customer requirements are met. The role also involves handling inquiries, preparing quotations, negotiating deals, and closing sales. The Marketing Engineer is encouraged to attend industry exhibitions, seminars, and networking events to enhance market presence. Requirements for this position include a Degree/Diploma in Mechanical, Chemical, or Industrial Engineering (or equivalent experience), 2-8 years of experience in marketing or sales of industrial equipment, particularly in pharma process machinery. The ideal candidate should have a robust technical understanding of vessels, tanks, and process equipment, along with exceptional communication, negotiation, and presentation skills. Willingness to travel for client meetings and site visits is also essential. The benefits of this role include a competitive salary with performance-based incentives, the opportunity to work with a prominent manufacturer in the pharma industry, and avenues for career growth and learning. If you meet the qualifications and are excited about this opportunity, we encourage you to apply by sending your resume to daxesh@gxpsolutions.co.in.,

TAAL Tech India Pvt. Ltd. is a leading provider of Engineering Services including Embedded and IoT solutions. Headquartered in Bangalore, India and with offices in USA, Germany, Austrlia and the Netherlands, TAAL Tech serves a global client base that includes a number of Fortune 500 Corporations. Position: Principal Engineer- Mechanical (Static Equipment Engineer): Work Location: Kudlu Gate, Bangalore Education: B.E Experience: 12+ Years of Experience Key Skills: PV Elite Role & Responsibilities: Should have prior experience with EPC/EPCM projects in oil & gas, power, or chemical sectors These experts should be capable of working with international standards (ASME, EN, API, IEC, PED, etc.) Review and design pressure vessels, tanks, columns, and exchangers Validate design calculations per ASME Sec VIII, EN 13445, TEMA, API 650 Prior exposure to European or North American codes and clients will be an added advantage. Prepare mechanical datasheets, specifications, and vendor document reviews Provide support during procurement and fabrication phases Ensure compliance with PED for EU projects Coordinate with piping and process teams for interfaces For Company details:- https://www.taaltech.com/ Please share your updated CV for further process "kiran_chander@taaltech.com".

Job & Division Summary: The candidate will support NPD, Lifecycle and i2V (innovate to Value) Engg. projects for Industrial Air Compressors, as required by Product / site teams in EMEIA. Responsibilities Execute engineering work in alignment with ongoing projects, ensuring technical, time, and Quality requirements. The candidate will apply Mechanical Design of static components & sub-assemblies used in the Packaging of Industrial Air Compressors using calculations, standards etc. and create 3D CAD assemblies and drawings for manufacture. This includes creating Large, 3D Sheet metal, Piping Assemblies for Compressor Packages & Subsystems as well as Casting, Machining component & assembly level drawings. Prepare engineering BoMs for ECR & ECN processes in Windchill PLM Engage with key Global stakeholders and meet the business partner s expectations. Flexible Travel as on required to global location as on need basis. Mechanical design calculations to verify existing designs or select new ones Develop presentation/ documentation material in support of NPD or i2V Design reviews, RCAs etc. Communicate effectively while working remotely with global engineering teams. Mandatory Skills Min. 4 years: Design experience with Compressor / Blower / Vacuum Pump / very similar packaged, rotating equipment. Expertise in Sheet metal, welded & threaded component design 3+ years of hands-on experience Experience with Compressor Subsystem sizing & selection e.g. Heat exchangers, Dryers, Valves etc. Expertise in Piping design for Pneumatic or Hydraulic systems - 3+ years of hands-on experience Expertise in Large Assembly & Top down, bottom-up modelling using both CREO 6 (or higher) as well as Inventor 2019 (or higher) CAD platforms, and PLM. Managing project priorities and timelines and stake holder expectations. Desired Skills Working knowledge of GD & T, ASME Y14.5 requirements in Drawings Familiarity with CREO and Inventor, as also with PLM processes in Windchill or Vault or both. Knowledge of ERP processes with SAP or Oracle will be an advantage. Knowledge of Pneumatic and Hydraulic Piping, pressure vessels & fittings standards is desirable. Fundamental understanding of mechanics of materials, structures and its application to product design and function Experienced in Mechanical design of parts or subsystems as per International Standards, Data handbooks etc. Strong individual contributor with ability to collaborate with Cross-functional teams as required. Education and Experience B.E / B.Tech / Diploma in Mechanical, Automobile Engineering (Full time course) M.Tech in Machine Design / Design Engg. (preferable, not mandatory) 6 ~ 10 years of overall experience with NPD, Lifecycle Engg. or VAVE of Packaged Compressors and /or similar Heavy mechanical equipment. Excellent communication skills in verbal and written English is necessary. Proactive, self-motivated individual with the ability to prioritize multiple tasks and manage time. Conversant with Microsoft Office tools Word; Excel; PPT. Flexible to travel within India / overseas for short durations, based on business need. What we Offer We are all owners of the company! Stock options(Employee Ownership Program) that align your interests with the companys success. Yearly performance-based bonus, rewarding your hard work and dedication. Leave Encashments Maternity/Paternity Leaves Employee Health covered under Medical, Group Term Life & Accident Insurance Employee Assistance Program Employee development with LinkedIn Learning Employee recognition via Awardco Collaborative, multicultural work environment with a team of dedicated professionals, fostering innovation and teamwork. Lean on us to help you make life better We think and act like owners. We are committed to making our customers successful. We are bold in our aspirations while moving forward with humility and integrity. We foster inspired teams. Bicycle rights prism poutine austin. Drinking vinegar gluten-free iceland, typewriter farm-to-table selfies XOXO food truck four loko. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request and a member of our team will contact you.

Job & Division Summary: The candidate will support NPD, Lifecycle and i2V (innovate to Value) Engg. projects for Industrial Air Compressors, as required by Product / site teams in EMEIA. Responsibilities Execute engineering work in alignment with ongoing projects, ensuring technical, time, and Quality requirements. The candidate will apply Mechanical Design of static components & sub-assemblies used in the Packaging of Industrial Air Compressors using calculations, standards etc. and create 3D CAD assemblies and drawings for manufacture. This includes creating Large, 3D Sheet metal, Piping Assemblies for Compressor Packages & Subsystems as well as Casting, Machining component & assembly level drawings. Prepare engineering BoMs for ECR & ECN processes in Windchill PLM Engage with key Global stakeholders and meet the business partner s expectations. Flexible Travel as on required to global location as on need basis. Mechanical design calculations to verify existing designs or select new ones Develop presentation/ documentation material in support of NPD or i2V Design reviews, RCAs etc. Communicate effectively while working remotely with global engineering teams. Mandatory Skills Min. 4 years: Design experience with Compressor / Blower / Vacuum Pump / very similar packaged, rotating equipment. Expertise in Sheet metal, welded & threaded component design - 3+ years of hands-on experience Experience with Compressor Subsystem sizing & selection e.g. Heat exchangers, Dryers, Valves etc. Expertise in Piping design for Pneumatic or Hydraulic systems - 3+ years of hands-on experience Expertise in Large Assembly & Top-down, bottom-up modelling using both CREO 6 (or higher) as well as Inventor 2019 (or higher) CAD platforms, and PLM. Managing project priorities and timelines and stake holder expectations. Desired Skills Working knowledge of GD & T, ASME Y14.5 requirements in Drawings Familiarity with CREO and Inventor, as also with PLM processes in Windchill or Vault or both. Knowledge of ERP processes with SAP or Oracle will be an advantage. Knowledge of Pneumatic and Hydraulic Piping, pressure vessels & fittings standards is desirable. Fundamental understanding of mechanics of materials, structures and its application to product design and function Experienced in Mechanical design of parts or subsystems as per International Standards, Data handbooks etc. Strong individual contributor with ability to collaborate with Cross-functional teams as required. Education and Experience B.E / B.Tech / Diploma in Mechanical, Automobile Engineering (Full time course) M.Tech in Machine Design / Design Engg. (preferable, not mandatory) 6 ~ 10 years of overall experience with NPD, Lifecycle Engg. or VAVE of Packaged Compressors and /or similar Heavy mechanical equipment. Excellent communication skills in verbal and written English is necessary. Proactive, self-motivated individual with the ability to prioritize multiple tasks and manage time. Conversant with Microsoft Office tools - Word; Excel; PPT. Flexible to travel within India / overseas for short durations, based on business need. What we Offer We are all owners of the company! Stock options(Employee Ownership Program) that align your interests with the companys success. Yearly performance-based bonus, rewarding your hard work and dedication. Leave Encashments Maternity/Paternity Leaves Employee Health covered under Medical, Group Term Life & Accident Insurance Employee Assistance Program Employee development with LinkedIn Learning Employee recognition via Awardco Collaborative, multicultural work environment with a team of dedicated professionals, fostering innovation and teamwork. Lean on us to help you make life better We think and act like owners. We are committed to making our customers successful. We are bold in our aspirations while moving forward with humility and integrity. We foster inspired teams. Colorado Resident? Bicycle rights prism poutine austin. Drinking vinegar gluten-free iceland, typewriter farm-to-table selfies XOXO food truck four loko. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request and a member of our team will contact you.

About The Role Skill required: Marketing Operations - Hyper Text Markup Language (HTML) Designation: Digital Content Management Sr Analyst Qualifications: Any Graduation Years of Experience: 5 to 8 years About Accenture Combining unmatched experience and specialized skills across more than 40 industries, we offer Strategy and Consulting, Technology and Operations services, and Accenture Song all powered by the worlds largest network of Advanced Technology and Intelligent Operations centers. Our 699,000 people deliver on the promise of technology and human ingenuity every day, serving clients in more than 120 countries. Visit us at www.accenture.com What would you do Help balance increased marketing complexity and diminishing marketing resources. Drive marketing performance with deep functional and technical expertise, while accelerating time-to-market and operating efficiencies at scale through Data and Technology, Next Generation Content Services, Digital Marketing Services & Customer Engagement and Media Growth Services.Role requires Digital Marketing Ads & Promotion creation/designSet of markup symbols or codes inserted in a file intended for display on a World Wide Web browser page. It describes the structure of text-based information in a document by denoting certain text as links, headings, paragraphs and lists as well as to supplement that text with interactive forms, embedded images and other objects--typically for developing web pages. What are we looking for Proficiency in HTML and CSS:Strong knowledge and hands-on experience in coding responsive HTML email tem-plates that render consistently across various email clients and devices.Email Design Best Practices:Understanding of email design principles, user experience (UX) considerations, and email deliverability best practices.Testing and Troubleshooting:Experience in testing emails across different devices and email clients to identify and resolve rendering issues.Attention to Detail:A keen eye for detail to ensure accuracy and consistency in coding and email rendering.Email Automation:Familiarity with email automation tools and processes, including journey-based emails and triggered campaigns.Graphic Design:Basic graphic design skills to assist in creating visual elements for email templates.SQL:Understanding of SQL queries to work with data within SFMC s Data Extensions.A/B Testing:Experience in setting up and analyzing A/B tests to optimize email campaign performance.Accessibility:Awareness of email accessibility best practices to ensure emails are inclusive and compliant with ac-cessibility standards. Roles and Responsibilities: In this role you are required to do analysis and solving of increasingly complex problems Your day to day interactions are with peers within Accenture You are likely to have some interaction with clients and/or Accenture management You will be given minimal instruction on daily work/tasks and a moderate level of instruction on new assignments Decisions that are made by you impact your own work and may impact the work of others In this role you would be an individual contributor and/or oversee a small work effort and/or team Please note that this role may require you to work in rotational shifts Qualification Any Graduation

About The Role Skill required: Marketing Operations - Hyper Text Markup Language (HTML) Designation: Digital Content Management Specialist Qualifications: Any Graduation Years of Experience: 4 to 7 years About Accenture Combining unmatched experience and specialized skills across more than 40 industries, we offer Strategy and Consulting, Technology and Operations services, and Accenture Song all powered by the worlds largest network of Advanced Technology and Intelligent Operations centers. Our 699,000 people deliver on the promise of technology and human ingenuity every day, serving clients in more than 120 countries. Visit us at www.accenture.com What would you do Help balance increased marketing complexity and diminishing marketing resources. Drive marketing performance with deep functional and technical expertise, while accelerating time-to-market and operating efficiencies at scale through Data and Technology, Next Generation Content Services, Digital Marketing Services & Customer Engagement and Media Growth Services.Role requires Digital Marketing Ads & Promotion creation/designSet of markup symbols or codes inserted in a file intended for display on a World Wide Web browser page. It describes the structure of text-based information in a document by denoting certain text as links, headings, paragraphs and lists as well as to supplement that text with interactive forms, embedded images and other objects--typically for developing web pages. What are we looking for Proficiency in HTML and CSS:Strong knowledge and hands-on experience in coding responsive HTML email tem-plates that render consistently across various email clients and devices.Email Design Best Practices:Understanding of email design principles, user experience (UX) considerations, and email deliverability best practices.Testing and Troubleshooting:Experience in testing emails across different devices and email clients to identify and resolve rendering issues.Attention to Detail:A keen eye for detail to ensure accuracy and consistency in coding and email rendering.Email Automation:Familiarity with email automation tools and processes, including journey-based emails and triggered campaigns.Graphic Design:Basic graphic design skills to assist in creating visual elements for email templates.A/B Testing:Experience in setting up and analyzing A/B tests to optimize email campaign performance.Accessibility:Awareness of email accessibility best practices to ensure emails are inclusive and compliant with ac-accessibility standards. Roles and Responsibilities: In this role you are required to do analysis and solving of moderately complex problems May create new solutions, leveraging and, where needed, adapting existing methods and procedures The person would require understanding of the strategic direction set by senior management as it relates to team goals Primary upward interaction is with direct supervisor May interact with peers and/or management levels at a client and/or within Accenture Guidance would be provided when determining methods and procedures on new assignments Decisions made by you will often impact the team in which they reside Individual would manage small teams and/or work efforts (if in an individual contributor role) at a client or within Accenture Please note that this role may require you to work in rotational shifts Qualification Any Graduation

Role & responsibilities We are looking candidate as Regional sales head in Hyderabad location for Boiler manufacturing Client. Must Have - Product knowledge of Boiler or Heat Exchanger or Compressor or Pressure valves or similer Key Responsibilities: Sales Strategy and Planning: Develop and implement regional sales strategies aligned with overall company objectives, including sales targets, market penetration plans, and customer acquisition strategies. Business Development: Identify and pursue new business opportunities within the region, including new applications, products, and markets. Sales Team Leadership: Manage, motivate, and guide the regional sales team, providing coaching, training, and performance management to ensure team success. Customer Relationship Management: Build and maintain strong relationships with key clients and stakeholders, including large corporate and business houses. Sales Performance Monitoring: Track and analyze sales performance against targets, identify areas for improvement, and implement corrective actions. Market Analysis and Intelligence: Monitor market trends, competitor activities, and customer needs to inform sales strategies and product development. Financial Management: Contribute to the development and management of the regional sales budget, ensuring efficient resource allocation and cost management. Reporting and Communication: Provide regular reports on sales performance, market trends, and competitor activities to senior management. Preferred candidate profile

Role & responsibilities Design and develop ASME-compliant pressure vessels and cryogenic tanks (Liquid Nitrogen, Liquid Oxygen, LNG, Ehane, Hydrogen and Ammonia). Perform storage tanks, pressure vessels and Cryogenic tank designs per API 650 , 620 , 653, ASME Codes. Design of cryogenic tanks include outer tank, Inner tank, Insulation, Thermal corner protections, Roof plates, roof platforms, pipe supports, anchors etc. Perform structural analysis and stress calculations for pressure vessels and Cryo tanks using Finite Element Analysis (FEA) tools like Ansys etc. Perform vessel designs using PV Elite, Compress softwares. Check detailed engineering drawings, bill of materials (BOMs), and specifications using CAD software. Ensure all designs meet ASME, API, and other relevant international standards. Stay updated with emerging technologies and advancements in the pressure vessel and cryogenic tank industry. Preferred candidate profile Bachelors , masters degree or PhD in mechanical engineering or a related field. Minimum of 5 years of experience in designing Storage tanks, pressure vessels, and cryogenic tanks. Strong proficiency in FEA tools such as ANSYS, Abaqus, or equivalent software. Experience with CAD software for checking the drawings. Knowledge of material selection, welding techniques, and fabrication processes for pressure vessels and Cryogenic tanks. Understanding of industry codes and regulations such as ASME, API 650/620 Strong problem-solving skills and ability to conduct root cause analysis. Excellent communication and collaboration skills to work with cross-functional teams. Ability to manage multiple projects and meet tight deadlines.

Fabrication process knowledge Identifying, qualifying, and securing business opportunities Open to field visits, Should interact with clients and understand their requirements Generate leads from the domestic markets Required Candidate profile Background from Distillation / pressure vessel fabrication / oil & gas industry is a MUST Understanding client needs and offering solutions and support Good English communication and negotiation skill

ASME Boiler & Pressure Vessel (BPV) Code inspections of pressure equipment—boilers, pressure vessels, piping, welding, testing—to ensure full compliance with ASME, National Board, and applicable jurisdictional regulations Roles and Responsibilities Conduct shop and field inspections (internal/external) at critical stages of fabrication and assembly . Witness hydrostatic/pneumatic/proof tests and non-destructive examinations (NDE) as required nsure proper calibration and verification of inspection and test equipment Maintain the ASME Inspector Diary noting daily inspections, findings, and witnessing events Confirm use of valid ASME BPV Code editions, materials certifications (MTRs), metallurgical traceability, and quality records Review and verify engineering drawings, specifications, and design calculations against code requirements Verify WPS, PQR, welder/operator qualifications and conformance of repairs to the ASME Code Identify, document, and report nonconforming conditions. Ensure corrective actions are implemented and closed per the quality program Verify that all ASME BPV Code conditions are satisfied before applying the Ustamp and ensure correct application of nameplates and National Board registration marks. Attend joint reviews with Certificate Holder and AI Supervisors as needed

Role & responsibilities Meet targets that have been set in the Annual Business Plan for Heating SBU for the region. Attending sales meetings & negotiations with customers. Understanding client requirement and sharing information with Proposal/back end team to device best and customized solution, tender/ inquiry evaluation. Track & report sales and marketing activities on a decided periodic basis. Analysis of Orders won and lost and implement learning and follow best practices. Engage in techno - commercial discussions with clients, consultants, EPC contractors for business development in respective regions. Tracking Competition strategy and device counter for same. Achieving sales target for assigned territory. Actively work on building the brand and image of Thermax Build and maintain a detailed, active customer database. Build and manage relationships with large corporate and business houses. Coordination with Peers from other divisions/regions and maximize cross sale opportunities. Business development through new applications/FOAK products. Preferred candidate profile Functional: Knowledge of basic engineering equipment and processes Good presentation & analytical skills Effective communication skills Clear & strong orientation towards results, targets and deadlines Willing to travel extensively to achieve targets set Sharp commercial acumen and high technical uptake Product and Project Sales profile will be added advantage. Behavioral: Smart, enthusiastic, proactive and good leadership skills Motivated by achievement and accomplishment High customer orientation Ability to handle pressure and perform in the face of it Ability to network with various contact points, internal and external, build and nurture relationships Please share your profiles to srinivasan@leadhr.net & 7200184394

DEKRA India Pvt. Ltd. is a group company of DEKRA SE. DEKRA is one of the worlds leading professional safety firms, headquartered in Stuttgart, Germany. With over 45,000 employees in 50 countries, DEKRA has been active in the field of safety since 1925. DEKRA India Pvt. Ltd. with offices in Delhi, Mumbai, Pune and Hyderabad offers an exciting & stimulating work environment and an opportunity for rapid career progression. We provide our employees with regular training, knowledge and the encourage them to implement original and unique solutions. Our compensations match the best in the industry. Design Reviewer DEKRA (India) Pvt. Ltd is looking for Competent and Qualified Expert for Design Review of Pressure Vessels, Boilers, and other Mechanical Components. Location is in Mumbai/Pune/Delhi. As Design Reviewer your job functions would primarily be To perform Design Review of Pressure Equipment/Vessel as per various codes and regulations e.g., Pressure Equipment Directive (PED) of European Union (EU), ASME, IBR & PESO. To perform review of Technical File before submitting to Customer / NoBo Experience: 10 - 15 years of hands-on Knowledge and Experience in the following areas Review of Drawings and Design Calculations of Pressure Equipment as per PED, ASME, IBR and PESO. (MUST) Material Inspections as per EN and ASME Standards. (Not Must but Preferred) Fabrication, Welding and NDT as per EN and ASME Standards. (Not Must but Preferred) Thorough understanding of design related requirements of various codes and standards including but not limited to PED, ASME, IBR, PESO etc. Educational Qualifications: Diploma or B-Tech in Mechanical / Metallurgy Specialization / Expertise and Experience in Design Engineering Welding (CSWIP / AWS) and NDT qualifications (as per ASNT / ISO 9712) preferred. Work experience with a Notified Body (NoBo) or a Pressure Equipment Manufacturer. Salary: Negotiable.,

Pump manufacturing Expeditor ,Rotary equipment, Flow Serve Pump, global supply chain satisfy APQP/PPAP processes, Witness pressure tests as per ITP,NDE Inspection shock absorber, water pumps, CNC, VMC and HMC

Familiar with mechanical design of pressure vessels, road tankers and heat exchangers Preparation of Equipment Layout Support Fabrication Drawings with Bill of Materials GA Drawings of Pump skids, Piping Skids Process and instrumentation diagrams Required Candidate profile ITI, or Diploma with 2 years’ experience in Gas Piping fabrication industry is preferred. JOB Location: Wai (Preferred candidate nearby locations only)

Job Title Senior Engineer Location Bangalore About Us Ingersoll Rand is a global provider of mission-critical flow creation, life science and industrial solutions. Ingersoll Rand s Global Engineering & Technology Center (GEC) in Bangalore, A GREAT PLACE TO WORK CERTIFIED WORKPLACE is driven by an ownership mindset and entrepreneurial spirit, has been a beacon of innovation for over 19 years, embodying our purpose to Make Life Better for our employees, customers, shareholders and the planet. The Engineering & Technology center has expertly supported a diverse range of industrial products, offering deep expertise in core and digital engineering space. By cultivating a sense of inclusion, belonging and respect, and a collaborative culture, the GEC has fostered the most talented and capable engineers, thereby playing a pivotal role in driving Ingersoll Rand s purpose and strategic focus areas. Job & Division Summary: The candidate will support NPD, Lifecycle and i2V (innovate to Value) Engg. projects for Industrial Air Compressors, as required by Product / site teams in EMEIA. Responsibilities Execute engineering work in alignment with ongoing projects, ensuring technical, time, and Quality requirements. The candidate will apply Mechanical Design of static components & sub-assemblies used in the Packaging of Industrial Air Compressors using calculations, standards etc. and create 3D CAD assemblies and drawings for manufacture. This includes creating Large, 3D Sheet metal, Piping Assemblies for Compressor Packages & Subsystems as well as Casting, Machining component & assembly level drawings. Prepare engineering BoMs for ECR & ECN processes in Windchill PLM Engage with key Global stakeholders and meet the business partner s expectations. Flexible Travel as on required to global location as on need basis. Mechanical design calculations to verify existing designs or select new ones Develop presentation/ documentation material in support of NPD or i2V Design reviews, RCAs etc. Communicate effectively while working remotely with global engineering teams. Mandatory Skills Min. 4 years: Design experience with Compressor / Blower / Vacuum Pump / very similar packaged, rotating equipment. Expertise in Sheet metal, welded & threaded component design - 3+ years of hands-on experience Experience with Compressor Subsystem sizing & selection e.g. Heat exchangers, Dryers, Valves etc. Expertise in Piping design for Pneumatic or Hydraulic systems - 3+ years of hands-on experience Expertise in Large Assembly & Top-down, bottom-up modelling using both CREO 6 (or higher) as well as Inventor 2019 (or higher) CAD platforms, and PLM. Managing project priorities and timelines and stake holder expectations. Desired Skills Working knowledge of GD & T, ASME Y14.5 requirements in Drawings Familiarity with CREO and Inventor, as also with PLM processes in Windchill or Vault or both. Knowledge of ERP processes with SAP or Oracle will be an advantage. Knowledge of Pneumatic and Hydraulic Piping, pressure vessels & fittings standards is desirable. Fundamental understanding of mechanics of materials, structures and its application to product design and function Experienced in Mechanical design of parts or subsystems as per International Standards, Data handbooks etc. Strong individual contributor with ability to collaborate with Cross-functional teams as required. Education and Experience B.E / B.Tech / Diploma in Mechanical, Automobile Engineering (Full time course) M.Tech in Machine Design / Design Engg. (preferable, not mandatory) 6 ~ 10 years of overall experience with NPD, Lifecycle Engg. or VAVE of Packaged Compressors and /or similar Heavy mechanical equipment. Excellent communication skills in verbal and written English is necessary. Proactive, self-motivated individual with the ability to prioritize multiple tasks and manage time. Conversant with Microsoft Office tools - Word; Excel; PPT. Flexible to travel within India / overseas for short durations, based on business need. What we Offer We are all owners of the company! Stock options(Employee Ownership Program) that align your interests with the companys success. Yearly performance-based bonus, rewarding your hard work and dedication. Leave Encashments Maternity/Paternity Leaves Employee Health covered under Medical, Group Term Life & Accident Insurance Employee Assistance Program Employee development with LinkedIn Learning Employee recognition via Awardco Collaborative, multicultural work environment with a team of dedicated professionals, fostering innovation and teamwork. Special Accommodation If you are a person with a disability and need assistance applying for a job, please submit a request . Lean on us to help you make life better We think and act like owners. We are committed to making our customers successful. We are bold in our aspirations while moving forward with humility and integrity. We foster inspired teams. Colorado Resident? Bicycle rights prism poutine austin. Drinking vinegar gluten-free iceland, typewriter farm-to-table selfies XOXO food truck four loko. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request and a member of our team will contact you.

Authorized Inspector - HSB India Company HSB Location Pune , India Graduate Engineer with minimum of 5 years experience in pressure vessels / boilers manufacturing companies. Qualified as Authorized Inspector with AI Commission from National Board. Monitors Fabricator, Installer, or Repairer s Quality Control Program to determine adherence to that system and in turn to ASME or NBIC requirements. Reviews and approves/rejects procedures and personnel qualifications for welding and non-destructive examination. Verifies through a review of documentation, witnessing of inspections and tests, and certification that items inspected comply with ASME Code or NBIC requirements Reviews and approves/rejects specifications, calculations, and drawings for each item inspected to assure Code compliance. Maintains bound diary of inspection activities in order to document inspections performed and to show status of items, for use as necessary by replacement inspectors, and to National Board. Interfaces with client s personnel in a professional manner to develop and maintain good working relationships. Generates weekly reports to apprise the company of expenses, hours worked and production progress in accordance with written instructions and policies. Approves revision to Fabricator, Installer or Repairer s Quality Control manual and participates in ASME, National Board, or Jurisdictional Joint Reviews.

Job purpose / Objective The purpose of the position is to Oversee and manage the Operation & Maintenance of Mechanical Facilities and utility equipments to ensure that the mechanical systems run smoothly and efficiently to ensure compliance to safety and regulatory standards. Coordinate and oversee the work of external contractors, vendors, and service providers, ensuring that contracted work is performed to the required standards.it also involves overseeing the team of oil management systems, overseeing material handling equipment, and ensuring proper functioning of areas such as the diesel yard, gas yard, LN yard, and Taxi operations. Job Title: Group Leader - Mechanical Services in Facilities & Mechanical Services Key Responsibilities: 1. Mechanical operation Systems and Asset Maintenance. Establish & sustain Utility maintenance management process, prepare contingency plan & execute, evaluate the life cycle of the equipments & prepare investment plan for 3-5 years. Ensuring the uninterrupted supply of utilities for production MAE. Oversee day-to-day O&M of mechanical utilities, HVAC, compressed air, boilers, pumps, and other equipment. Develop preventive and predictive maintenance schedules to ensure equipment uptime and longevity. Implement continuous improvement initiatives to enhance system performance and reliability. 2. Contractor and Vendor Management Supervise and coordinate the work of external contractors and service providers. Ensure all outsourced services are performed according to contract terms and quality standards. Review and approve maintenance scopes, service contracts, and work permits. 3. Compliance and Safety Management Ensure strict adherence to all safety, environmental, and regulatory requirements for mechanical systems. Monitor compliance in licensed areas (diesel yard, gas yard, LN yard), ensuring documentation and safety measures are maintained. Implement risk assessments, safety audits, and emergency response protocols for mechanical operations. 4. Utility & Oil Management Oversee lubrication and oil management systems , ensuring proper storage, usage, and disposal in accordance with environmental norms. Monitor utility consumption and propose optimization measures to reduce costs and environmental impact. 5. Material Handling Equipment Oversight Manage maintenance and safe operation of material handling equipment such as forklifts, cranes, and hoists. Ensure operator training, routine inspections, and certifications are up to date. 6. Company owned Vehicle and Taxi Management and Support Services Oversee the scheduling, maintenance, and compliance of company taxi operations. Ensure vehicle safety, driver management, and coordination with HR/admin functions. 7. Leadership and Team Development Lead a team of mechanical engineers, technicians, and support staff. Foster a culture of safety, reliability, and accountability within the team. Provide training, mentorship, and performance evaluations. 8. Liasoning and Statutory Compliance Coordinate with relevant stakeholders to ensure Legal compliances for maintenance of Boilers, Pressure vessels, Gas/Fuel storages etc 9. Project Management Implement project management approach for upgradation of utilities & support MAE relocation activities ensuring timely completion of projects with key deliverables etc Key results: Utility Asset performance (MTTR, MTBF, equipment up-time) and Availability for production process Zero incident and accident, Zero legal non-compliance Energy efficiency ratio, Benchmarking kW/CFM, kW/TR, Investment realization, High Response and Resolution ICSS survey, excellent collaboration internal and external customers Innovation and strategic thinking Qualifications Bachelor s or Master s degree in Mechanical Engineering or related field. 10 to 12 years of experience in mechanical operations and maintenance, preferably in industrial or facilities management settings. Proven experience in leading multi-disciplinary teams and managing vendor contracts. Strong knowledge of safety and regulatory compliance in licensed mechanical areas. Experience in handling utilities (compressed air, chilled water, HVAC, etc.) and material handling equipment. Exposure to SAP, CMMS, BMS, SCADA, Power-Bi or similar maintenance management systems is preferred.

Minimum Degree in Mechanical/ Production Engineering Minimum 5 Years Experience as a Welding Engineer in the Field Fabrication & Welding Experience in U-stamp audit Complying with the requirements of Quality control Manual, ASME codes and Customer specifications Good Knowledge of ASME-IX Knowledge required in International codes such as ASME, API, TEMA etc Preparation and Approval of welding procedure specification (WPS), Procedure Qualification record (PQR), and Welder & Welding operator performance qualification record (WPQ). Supervision and Qualifying the Welding procedures Preparation of Weld plan as per approved Drawing, Applicable codes and specification. Preparation of TPS for welding consumables. Preparation and maintain Welder Continuity log Preparation and issue Qualified Welders List based on Welder’s Continuity Log Provide resolution to Non-conformities arising in welding, in consultation with MQC Overall Supervision of welding activities at Shop floor Additional qualifications required ASNT Level II in RT, UT, PT & MT. Good knowledge of MS Office (Excel, Word, PPT)

pressure vessels manufacturing ,fabrication standards ASME, PED, DIN AWS . Vendor development, Cost and budget calculation knowledge, NDT awareness. Latest welding technology & all welding process like GTAW ,SAW ,SMAW, FCAW, GMAW

Job Title: Sr. Integrity Engineer Location: Bangalore, KA Job Type: Full time Permanent Job Requirements This position is a mechanical integrity technical position for fixed equipment in support of petrochemical facility This position provides technical support to the client with a focus on managing the risk based inspection program, troubleshooting, asset improvement, and technology selection Provide strong technical leadership in Inspection/Corrosion Management for Oil & Gas upstream/downstream assets Provide technical solution in upstream/downstream Asset Integrity Has ability to create innovative solutions /automations/ methodologies to build a differentiation for Quest Global Integrity assessment/assurance activities like FFS, Corrosion Evaluations and Remaining Life Studies Drive and manage Integrity Engineers to execute the workflows with Quality at scale Provide pre-sales support for new business deals and post-sales support for the new projects assigned Drive core team members to recruit skilled resources or train internal resources to achieve the targets Act as a bridge between customer, sales organization and global technical teams Lead Develop, nurture and manage global customer relationships and drive strategic partnering initiatives to address unique business situations and complex technology needs Review technical scoping, estimation, fitment and feasibility studies, mapping customer expectations and solution design, prepared by Program Managers and Project Leader Degradation evaluations related to pressure equipment, heat exchangers, piping circuits, fired equipment, flares, above ground storage tanks, and/or pressure relief devices. Monitoring and surveillance of integrity parameters to ensure reliable operations. Troubleshooting, root cause analysis, and integrity recommendation stewardship. Bad actor identification and analysis to reduce equipment downtime. Data analytics, digital tools/ technologies and operationalize upgraded work practices through digital transformation. Overall integrity effectiveness and management which includes, criticality assessments, consequence/ complexity rating of fixed equipment, development of fit-for-purpose risk based strategies, setting optimum task intervals including considerations to local regulations/ statutory requirements, timely review of inspection findings, and ever-greening of strategies. Work Experience Engineering degree (Mechanical/Materials or Chemical) 7 to 15 years of oil gas experience in related industry (refining/petrochemical/LNG/oil & gas) Should have sound knowledge on Oil & Gas upstream and downstream business in the following areas - Risk Based Inspection methodologies - Fixed equipment inspection tasks/ procedures - Inspection Optimization - Piping Circutization/TML development - API Damage Mechanisms of Refinery/Chemicals - In-service inspection of all types of fixed equipment - Knowledge of materials and standards - Knowledge of corrosion & welding - Knowledge of NDTs -Thickness inspection management and analysis - Corrosion management and analysis - Inspection plan development/ optimization. - Knowledge of software (APM Meridium/Pestra/Credo, etc.) - Ability to lead teams - Excellent communication Should have working knowledge of oil and gas plant operations Should have exposure to Operating condition Safety, SHE risks, spill/ safety incident and equipment failure opportunities Should have Knowledge of various roles and responsibilities of engineers working in the oil and gas field/site Should have knowledge of corrective and preventative maintenance strategy Should have knowledge of International standards in design, quality, and procedures for approved equipment Working knowledge in key sections of ASME Sec Div. 1/2, ASME Sec V, ASME Sec IX, ASME Sec Il, ASME B31.3/ B31.1/ B31.4/ B31.8, ASME PCC-2 Field in-service inspection and repair of pressure equipment, heat exchangers, piping systems, pressure relief devices and above ground storage tanks in operating unit

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to support our Quality Assurance and Quality Control operations. The ideal candidate will have 3-7 years of experience in fabrication and inspection of filtration systems, pressure vessels, and related process equipment. The role involves hands-on inspection, quality documentation, coordination with third-party inspection agencies, and ensuring compliance with industry standards. Key Responsibilities: Conduct in-process and final inspections of pressure vessels, filters, strainers, and associated fabrication work. Review and interpret engineering drawings, WPS/PQR, and material specifications for compliance. Prepare and maintain quality documentation , including inspection reports, test certificates, traceability records, and material test reports (MTRs). Coordinate with third-party inspection agencies (TPI) and clients during stage and final inspections. Support NDT activities including radiography, dye penetrant testing, ultrasonic testing, etc. Verify compliance with ASME, PED, IBR, and other applicable standards and codes. Participate in internal audits and assist in preparing for customer audits and QA documentation. Maintain calibration records and ensure availability of required inspection instruments. Raise non-conformance reports (NCRs) and work with production and engineering to implement corrective actions. Ensure the implementation of quality systems and continuous improvement practices across the shop floor. Qualifications & Skills: Diploma/Bachelors degree in Mechanical Engineering or equivalent 3–7 years of experience in Quality Control in a pressure vessel/fabrication-based manufacturing industry Sound knowledge of ASME Section VIII, PED, IBR , and other fabrication standards Familiarity with welding processes, NDT methods, and documentation requirements Proficient in MS Office and documentation tools Strong attention to detail and communication skills Ability to interpret technical drawings and specifications Preferred Skills: Certification in welding inspection (e.g., CSWIP, AWS-CWI) is a plus Experience working with ERP or quality management systems Exposure to Oil & Gas, Power, or Chemical process equipment inspection

We are seeking a detail-oriented and technically capable Design Engineer with 4-8 years of experience in designing filtration systems and pressure vessels. The ideal candidate will have a strong foundation in process and mechanical design, proficiency in AutoCAD, and experience supporting both pre-sales and post-sales engineering activities. Key Responsibilities: Prepare and review GA drawings, fabrication drawings , calculations and BOMs for filtration systems and pressure vessels. Perform process calculations including flow rate, pressure drop, and basic sizing based on client inputs and industry standards. Support vessel and component design in compliance with ASME, PED, and other applicable codes. Collaborate with the sales and applications teams during proposal development and customer technical clarifications. Assist in the development of technical documentation such as O&M manuals, test procedures, and compliance forms. Engage in customer discussions to resolve design queries and obtain approvals. Ensure that designs are practical, cost-effective, and aligned with production capabilities. Coordinate with internal teams including production, quality, and procurement to ensure engineering deliverables are met on schedule. Maintain accurate project records and revisions of drawings. Stay current with industry best practices, engineering tools, and standards. Qualifications & Skills: Bachelors degree in Mechanical or Chemical Engineering 4-8 years of relevant experience in design of filtration systems, pressure vessels, or similar process equipment Proficient in AutoCAD , Solidworks MS Office, and familiarity with design standards such as ASME Section VIII, PED, DIN Working knowledge of process fundamentals related to filtration applications Strong communication and documentation skills Ability to multitask and manage design responsibilities across multiple projects Positive attitude with a team-oriented approach and attention to detail Preferred Skills: Exposure to ERP systems and engineering document control Experience working with Oil & Gas, Power, Fertilizer, or Chemical industry clients Knowledge of fabrication and manufacturing processes

A person with Diploma in mechanical engineering /metallurgy background with minimum Ultrasonic Testing (UT) & Radiographic Testing (RT) level II qualification and having good knowledge of NDE techniques. Thorough knowledge of NDE techniques, UT in particular is required. The person shall also have good hands-on experience in Ultrasonic inspection of welds preferably of pressure vessel. Knowledge of advanced NDE methods of PAUT and TOFD is considered added advantage. Person to be familiar with Pressure Vessel manufacturing and NDE. Knowledge of ASME codes and standards is desirable. Job Description include: Performing Ultrasonic inspection of welds of pressure vessels and other components. Preparation of reports. Preparation of technique sheets, procedures and calibration block drawings. Radiographic Testing Film review, techniques sheet review and procedure preparation. Overall NDE planning and execution of NDE activities. Interaction and coordinating with customers.