1209 Machinery Jobs - Page 32

Complete inventory of uniforms and linens. Conduct monthly inventory of laundry supplies. Report faulty equipment, maintenance needs, and safety hazards to manager/supervisor. Train employees on all laundry procedures, including safety procedures and equipment operation. Verify that laundry requests are completed for each department as needed. Operate and monitor washing, dry cleaning, and drying machinery. Inspect linens and terry for damage. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Speak with others using clear and professional language; prepare and review written documents accurately and completely. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. . Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: At least 1 year of supervisory experience. License or Certification: None .

Role & Operate and monitor pharmaceutical manufacturing machines (e.g. granulation, compression, coating, capsule filling). Maintain cleanliness and hygiene (as per GMP norms) in the manufacturing area. Assist in line clearance, material movement, and documentation work. responsibilities Preferred candidate profile

Design efficient production processes and workflows Ensure quality standards and machinery performance Analyze production data for improvements Coordinate with maintenance and operations teams

Conduct preventive and corrective maintenance activities to ensure the efficient and reliable operation of equipment and machinery Troubleshoot and diagnose problems and develop and execute maintenance plans to minimise downtime and disruptions Required Candidate profile Analyse data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance Collaborate with production teams, management and supplier.

Purpose of Position: Engineer Production role will be responsible for executing production plan with efficient utilization of resources (Manpower, Machinery) aligned with Material planning team. Align CFT to achieve key matrices of Safety, Quality, OTD, Cost and Productivity. Key Responsibilities: Meeting the production plan and ensure schedule adherence on a consistent basis. Focusing on maintaining and improving the safety systems available in shop floor. Conduct the DM (daily management) meeting reviewing Safety, Quality. Delivery and Productivity metrics with the site leadership Maintaining the 5S system available in shop floor. Maintaining the adherence of Quality standards. Monitoring the production/ assembling processes. Participating in MRB (Material review board) and act. Managing the daily production plan by hourly scorecard and should have end to end ownership in their work area. Initiating action for day-to-day failures in DM board (Daily management board) @ shop floor level. Productivity improvement by process improvement. Plan availability of production consumables, fixtures and optimize costs. Ensuring the Shopfloor adherence to processes and close the audit findings. Shift operations planning. Operators mentoring and Performance management process. Ensuring valid SOP, process training and validation for operators by coordinating with ME & QA Managing the crisis on manpower absent and machine failure. Communicating the management inputs to the operators. Co-ordinating with other department for smooth flow in shop floor. Posting produced Finished goods against production order in SAP Flexible to work across 3 shifts when needed. Education & Experience:The ideal candidate will have Total Experience in years: >5 Graduation/ Degree : BE/B.Tech in Mechanical or Electronics communication Engineering Post-Graduation/ PGDM : N/A. Mandatory Certifications Required: ISO 45001:2018 / ISO 9001:2015/ ISO 14001:2015 Other preferred courses/ certifications: Microsoft Office, Exposure to Power BI and SQL.

Roles and Responsibilities -Follow up with vendors to ensure timely & quality wise delivery of ordered material. -Negotiation with vendors for rates, payment terms, policy. -Co-ordination with Design and Production for all technical requirements. Required Candidate profile Floating inquiry to vendors and getting techno-commercial offers. Maintaining professional relationship with Vendors. Co-ordinate with CHA (Agent) for all import shipment.

Career Area: Manufacturing : Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you'rejoining a global team who cares not just about the work we do but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don'tjust talk about progress and innovation here we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. JOB PURPOSETo supervise a staff responsible for providing the most efficient, economical and timely Maintenance services required to support the manufacturing and utility operations. JOB DUTIES:This is a supervisory position responsible for providing the most appropriate Plant Engineering & Maintenance services to support manufacturing. Included in these duties are Preventive and Predictive maintenance services, electrical/electronic, systems integration and other services needed to support the operation. Directs a staff capable of providing needed services and utilizes appropriate expertise to assign work. Considers manpower requirements for each project and utilizes proper engineering resources to provide service. Provides guidance and support to staff personnel assigned specific portions of project and coordinates project to ensure completion as scheduled. Resolves problems in Maintenance services the most economical and efficient systems deciding what or which Spares and services should be purchased. Acts as a trouble-shooter and investigates and determines causes for failure, lack of efficiency and need for repairing or improving equipment. Analyzes problems, discusses with other technical personnel and determines most cost-effective method to resolve problem. Assigns work according to expertise and follows projects to ensure satisfactory completion. Ensures proper selection, direction, development and motivation of all personnel to maintain an effective and efficient work force capable of meeting objectives. Ensures government related compliance, proactive planning to ensure remain facility compliance with regulations. Adheres to established standards, policies and practices relating to quality, cost reduction, safety, hazardous materials, ergonomics, affirmative action, etc. in performing assigned duties. The position supervises or manages a work unit of primarily management and salaried employees where planning, scheduling, monitoring, and reviewing work of subordinates is required. The position is responsible for expense budgets, capital forecasts and expenditures, and all personnel issues in the area including performance evaluations of subordinates. The position often confronts complex issues and problems that require careful analysis and diagnosis. Problems are often unique, and solutions can require original approaches. The incumbent may modify existing approaches or develop new solutions. The incumbent establishes and then monitors general policies and guidelines for projects under his/her control, to ensure specific management goals are met and desired results are achieved. The position impacts key quality goals including Continuous Improvement, Delivery Timeliness, Equipment Accuracy, Operational Efficiency, Cost Savings, Process Capability, Part Quality, ISO and Class A Certification, etc. BACKGROUND/EXPERIENCE: Requires Bachelor of Engineering (full time) degree with experience of at least 15 years gained through practical experience on a variety of staff and supervisory assignments. An overall knowledge of Maintenance services manufacturing operations, processes, machines, equipment and systems is essential. Requires the ability to plan and organize as well as communicate with other technical personnel. Posting Dates: June 16, 2025 - June 24, 2025 Caterpillar is an Equal Opportunity Employer. Not ready to applyJoin our Talent Community.

Experience Required : 20+ Years Salary Budget : 30 LPA Working Days : Monday to Saturday Job Purpose The Sr. Manager Operations will be responsible for overseeing the end-to-end operations of the manufacturing facilities. The role demands a strategic and hands-on leader who can ensure operational efficiency, cost-effectiveness, safety, and compliance while aligning plant performance with broader organizational objectives. Key Roles & Responsibilities 1. Strategic Planning & Leadership Develop and implement strategic initiatives to drive efficiency, productivity, and profitability. Align plant operations with organizational goals both short-term and long-term. Lead capacity expansion, modernization, and infrastructure development projects. 2. Operations Management Supervise daily manufacturing operations ensuring high-quality output and timely deliveries. Optimize the use of manpower, materials, and machinery for maximum productivity. Define and monitor KPIs to enable data-driven continuous improvement. 3. Financial Management Prepare, manage, and monitor plant budgets for cost optimization. Analyze operational costs and implement strategies for improved profitability. 4. Safety & Compliance Enforce strict safety standards and ensure a zero-incident workplace. Ensure full compliance with legal, environmental, and regulatory standards. 5. Team Management Lead, mentor, and motivate cross-functional teams and plant managers. Foster a culture of accountability, continuous learning, and operational excellence. Identify skill gaps and implement training and development programs. 6. Continuous Improvement Drive Lean Manufacturing, Six Sigma, and other industry best practices. Promote innovation and technology adoption for improved operational outcomes. Qualifications & Experience Education : Bachelor s degree in Engineering / Industrial Management or related field. MBA preferred. Experience : 20+ years in manufacturing/plant operations, including 10+ years in a senior leadership capacity. Proven track record of driving operational excellence and scaling manufacturing capabilities. Strong expertise in Lean Manufacturing, Six Sigma, and process improvement. Excellent leadership, communication, and analytical skills. Financial acumen with experience in budget management and cost control. Job Location: Mira Road

Job Purpose Produces seals using compression molding technology and performs preparatory task for elastomeric seal production as per standard operating procedures Must possess a clear understanding of general math & have the ability to read, write & comprehend written and spoken English or Hindi. Ability to comprehend technical drawings, BOM (bill of material), operation & maintenance procedures, quality & safety documents. Must have experience operating production machineries for producing rubber or flexible seals. Hands on work experience in operating compression/injection molding press machines will be an added advantage. Must be familiar with hot extrusion methods and machineries. Must posses hands on experiencing in handling rubber extrusion machines. (Hot/Cold). Must be experienced in handling 48 or above size two roll rubber mill. Must have good understanding about all potential hazards linked with rubber milling process. You are meant for this job if: ITI in Mechanical/ Fitter / Rubber Technology / Plastic Technology/ Foundry / Machinist OR Diploma in Mechanical / Rubber Technology / Plastic Technology / Production trade. Minimum 1 year of experience in production line as an operator for handling rubber products machineries e.g. compression molding press, injection molding press, rubber mill, rubber extrusion machine etc. OR Minimum 1 year of experience in production line as an operator for handling plastic injection molding machineries e.g. injection molding press, mold curing shop, mold maintenance, extrusion machine etc. Skills

B.E. - Mechanical Engineer with 5 to 8 Years of experience as Assembly Engineer in Machinery / Heavy Machinery / Packaging Manufacturing Industry. Able to assemble machine on his own independently. Knowledge of AutoCAD. Good Computer Knowledge. Required Candidate profile Experience in Machinery Assembly. Plan & implement assembly schedules effectively. Be able to adapt & follow SOPs related to machine assembly. Good English Communication Skills. Perks and benefits Negotiable - Depending Upon Candidate & Experience

Responsibilities & Key Deliverables Ensure compliance to system and processes in respect to areas in the department to deliver customer and market desirables. Benchmarking and implementation of world class technology for manufacturing. Plan and ensure optimum utilisation of man and assets. Initiating and Driving Cost Reduction Initiatives. Preparing and Maintaining Monthly MIS. Sound knowledge in CNC machines/PLC/Engine Assembly machines. Sound knowledge in testbed systems like Water circulation, Fuel system, IASYS software and Dynalec controls etc. CBM and TBM methodology for improving machine availability. Knowledge and hand s on experience of EHS and OHSAS. Implementing Low cost automation for improving productivity. Initiatives and improvements to have better machine availability. Adherence of TPM methodology. Corrective and Preventive Maintenance. MFMEA for machine cause identification and rectification. Breakdown reduction approach by using ECRS methodology. Quality Concerns resolution by QC Story methodology. Actively participating in QCRT committee. Inspire, lead and ensure healthy relation at all times with customer, supplier and employees within and outside department. To have better employee engagement in the department for fetching optimum results. Grooming and Enhancing Technical and function skills of officer through training. ABC analysis of spares and machines. Spare parts planning and procurement. Budget planning (Capital as well as Revenue) and execution. Responsiblefor keeping budget under control. Resource planning for the department Preferred Industries Automobile Education Qualification Bachelors of Technology; Diploma in Mechanical; Diploma in Mechatronics; Diploma in Electronics; Bachelors of Technology in Mechanical; Bachelors of Technology in Mechatronics; Bachelors of Technology in Electronics; Bachelor of Engineering General Experience If BE 08 - 12 yrs. If Diploma 12 - 16 yrs Critical Experience System Generated Core Skills 7 QC Tools Analytical Thinking Budgeting & Costing CNC Machine Communication Skills Conveyor Systems Customer Satisfaction Service Orientation Customer Sensitivity Equipment Handling & Maintenance Equipment Maintenance Equipment Handling Microsoft Office People Management Presentation Skills SAP Compliance Management Continuous Improvement Benchmarking Process Knowledge - Manufacturing Cost Management Programmable Logic Controller (PLC) Process Knowledge - Assembly Fuel System Condition Based Maintenance (CBM) Time-Based Maintenance (TBM) Preventive Maintenance (PM) Capability Building Occupational Health & Safety (OHS) Industrial Automation Total Productive Maintenance (TPM) Machinery Failure Mode and Effects Analysis (MFMEA) QC Story Relationship Management Employee Engagement Resource Management Training & Development Spare Parts Planning (SPP) Resource Planning System Generated Secondary Skills

Responsibilities & Key Deliverables Ensure compliance to system and processes in respect to areas in the department to deliver customer and market desirables. Benchmarking and implementation of world class technology for manufacturing. Plan and ensure optimum utilisation of man and assets. Initiating and Driving Cost Reduction Initiatives. Preparing and Maintaining Monthly MIS. Sound knowledge in CNC machines/PLC/Engine Assembly machines. Sound knowledge in testbed systems like Water circulation, Fuel system, IASYS software and Dynalec controls etc. CBM and TBM methodology for improving machine availability. Knowledge and hand s on experience of EHS and OHSAS. Implementing Low cost automation for improving productivity. Initiatives and improvements to have better machine availability. Adherence of TPM methodology. Corrective and Preventive Maintenance. MFMEA for machine cause identification and rectification. Breakdown reduction approach by using ECRS methodology. Quality Concerns resolution by QC Story methodology. Actively participating in QCRT committee. Inspire, lead and ensure healthy relation at all times with customer, supplier and employees within and outside department. To have better employee engagement in the department for fetching optimum results. Grooming and Enhancing Technical and function skills of officer through training. ABC analysis of spares and machines. Spare parts planning and procurement. Budget planning (Capital as well as Revenue) and execution. Responsiblefor keeping budget under control. Resource planning for the department Preferred Industries Automobile Education Qualification Bachelors of Technology; Diploma in Mechanical; Diploma in Mechatronics; Diploma in Electronics; Bachelors of Technology in Mechanical; Bachelors of Technology in Mechatronics; Bachelors of Technology in Electronics; Bachelor of Engineering General Experience If BE 08 - 12 yrs. If Diploma 12 - 16 yrs Critical Experience System Generated Core Skills 7 QC Tools Analytical Thinking Budgeting & Costing CNC Machine Communication Skills Conveyor Systems Customer Satisfaction Service Orientation Customer Sensitivity Equipment Handling & Maintenance Equipment Maintenance Equipment Handling Microsoft Office People Management Presentation Skills SAP Compliance Management Continuous Improvement Benchmarking Process Knowledge - Manufacturing Cost Management Programmable Logic Controller (PLC) Process Knowledge - Assembly Fuel System Condition Based Maintenance (CBM) Time-Based Maintenance (TBM) Preventive Maintenance (PM) Capability Building Occupational Health & Safety (OHS) Industrial Automation Total Productive Maintenance (TPM) Machinery Failure Mode and Effects Analysis (MFMEA) QC Story Relationship Management Employee Engagement Resource Management Training & Development Spare Parts Planning (SPP) Resource Planning System Generated Secondary Skills

Title: Rotating Equipment Specialist OVERVIEW KBR s history is built on the pioneers that set the standard across a variety of industries over the last century. Today, we continue that legacy by developing groundbreaking solutions for government and industry clients. We deliver science, technology and engineering solutions to governments and companies around the world Our team comprise approximately 29, 000 people globally, with customers in more than 80 countries and operations in 40 countries. KBR is proud to work with its customers across the globe to provide technology, value-added services, and long- term operations and maintenance services to ensure consistent delivery with predictable results. At KBR, We Deliver Proud History Bright Future KBR is committed to creating safe, collaborative work environments, where all ideas, views and input are respected and considered, regardless of race, religion or gender identity. INCLUSION AND DIVERSITY At KBR, we are passionate about our people, sustainability and our Zero Harm culture. We are at the heart of our commitment to and ongoing journey toward being a more inclusive and diverse company. This commitment is central to our team of teams philosophy and fosters an environment of real collaboration across cultures and locations. Our individual differences and perspectives bring enhanced value to our teams and help us develop solutions for the most challenging problems. We understand that by embracing those differences and working together, we are more innovative, more resilient and safer. We are making big strides in creating a more inclusive and diverse workforce, where all ideas and viewpoints are welcome and encouraged. We Deliver Together WORK LIFE BALANCE KBR provides excellent family-friendly benefits for team members like Remote Working Opportunities, Flextime, supportive Leave Policies and benefits. EQUAL OPPORTUNITY FOR ALL JOB TITLE: Rotating Equipment Specialist REPORTS TO: HOD - Machinery JOB LOCATION: Gurgaon, India POSITION SUMMARY: Functions as a technical specialist who would be responsible for the technical quality of the Data Sheets, Specifications, and Technical Requisitions for Rotating Equipment and Packaged Equipment. POSITION DESCRIPTION: Selection & application, preparation of Data Sheets, Specifications and Technical Requisitions, technical evaluation and Supplier document reviews, participation in inspection & testing, Post Erection Inspections, Commissioning and Field Troubleshooting as required for proprietary Rotating and Packaged Equipment for various KBR technologies. Prepare estimates for new KBR proposals. Assist with estimating staffing and schedules technical communications with clients. Under broad direction, functions as a technical specialist who makes decisions and recommendations that are recognized as authoritative and have a far reaching impact on extensive engineering and related activities of the company. Negotiates critical and controversial issues with top-level engineers and officers of other organizations and companies. Shall have active role in training of new personnel to the industry and KBR. Candidate shall be managing direct reports, establishing individual performance goals and objectives and reviewing performance against objectives. Maintains a safe working environment, ensuring compliance with all governmental regulations and corporate safety guidelines. Ensures that all personnel assigned to the operations receive appropriate safety training and adhere to all safety standards. MINIMUM REQUIREMENTS: Should be a first-class graduate in Mechanical Engineering with relevant professional experience of 10 - 12 years in selection & application, detailed engineering of Pumps, compressors, steam and gas turbines, packaged equipment n hydrocarbon down-stream industry - with technology/EPC companies, refining, and/or coal gasification, chemical industries. Experience in chemical, refining, and/or synthesis gas industries. Familiarity with industry standards for rotating equipment: API, ISO, NEMA, ASME, IEEE, IEC, ALPEMA, PIP etc Should have experience of preparing Technical Requisitions, technical evaluation and Supplier document reviews, participation in inspection, testing & commissioning as required for Rotating Equipment and Packaged Equipment, Preparation of estimates for new proposals, estimation of staffing & schedules etc. Experience in an operating company with packaged and rotating equipment used in KBR technologies: compressors, pumps, steam and gas turbines, packaged equipment, etc will be considered as an advantage. Must have strong communications skills - both verbal and written, which will be used within KBR and with external suppliers and clients. Candidate should be willing to travel domestically or internationally. KEY RELATIONSHIPS: Manages key business relationships with clients and with Technology Business Unit Managerial teams in India and Houston.

B.E. - Mechanical Engineer with 10 to 12 Years of experience as Assembly Engineer in Machinery / Heavy Machinery / Packaging Manufacturing Industry. Able to assemble machine on his own independently. Knowledge of AutoCAD. Good Computer Knowledge. Required Candidate profile Experience in Machinery Assembly. Plan & implement assembly schedules effectively. Be able to adapt & follow SOPs related to machine assembly. Good English Communication Skills. Perks and benefits Negotiable - Depending Upon Candidate & Experience

Education Qualification : Engineer - B.E / B.Tech / MCA Role Overview: The professional will be responsible for analyzing, designing, and testing automated machinery and processes in order to complete exact tasks. Job Responsibilities: 1. Working with the developers to ensure high quality build automation and deployment input to class leading data platform solutions. 2. Ensuring that platforms and data solutions can be deployed and operated in a highly repeatable and predictable manner through interaction and collaboration with relevant vendor and customer stakeholders. 3. Defining relevant solution deployment architectures and data environment platform design. 4. Deploying and managing multiple environments to support rapid, agile development approaches including demonstration environments. 5. Production of DevOps specifications. 6. Documentation of solutions (for example, data models, deployment architectures configurations, and set-up). 7. Working within a project management/agile delivery methodology in a leading role as part of a wider team. 8. Collaborate and liaise with other customer stakeholders/end users in the software development lifecycle - PMs, BAs, testing etc. 9. Provide effective knowledge transfer and upskilling to relevant customer personnel to ensure an appropriate level of future self-sufficiency.

KPMG entities in India are professional services firm(s). These Indian member firms are affiliated with KPMG International Limited. KPMG was established in India in August 1993. Our professionals leverage the global network of firms and are conversant with local laws, regulations, markets, and competition. KPMG has offices across India in Ahmedabad, Bengaluru, Chandigarh, Chennai, Gurugram, Hyderabad, Jaipur, Kochi, Kolkata, Mumbai, Noida, Pune, Vadodara, and Vijayawada. KPMG entities in India offer services to national and international clients in India across sectors. We strive to provide rapid, performance-based, industry-focused, and technology-enabled services, which reflect a shared knowledge of global and local industries and our experience of the Indian business environment. 5+ years of relevant experience required. He should have at least 2 EtoE implementation experiences in S4HANA SAP PM Senior Consultant is responsible for design and development of IT solutions for Work Management (Plant Maintenance) and Supply Chain functions. He will provide subject matter expertise for SAP interfacing with other applications of IT solutions to assure that best practices are implemented. Provide clients with full life-cycle project implementation consulting expertise including assessments, blueprinting, system build, testing and go-live stabilization. Experience creating As-Is, To-be process flows, gap analysis and preparation of function specifications. Build Functional Designs for SAP Plant Maintenance processes based on business requirements SAP for Plant Maintenance implementation and support projects. Education : Diploma in Bachelor s degree or higher in Information Technology, Business, Engineering, or a related field BE/BTech/MBA/MCA Full-Time Education SAP Certification EOE KI : Responsibilities for Internal Candidates Have extensive knowledge of facility/plant repair and maintenance Have extensive knowledge in the use of all hand and power tools to construct, renovate and repair facilities and equipment. Works as part of a team maintaining all facilities and equipment needed to support ongoing research efforts. Work requires up to 100% night work supporting research efforts as part of an experimental crew Planned preventative maintenance activities on various CNC machinery and other process equipment Delivering quality workmanship in terms of time, accuracy, and job feedback. Accurately assessing and communicating fault diagnostic issues and corrective actions to the supervision team.

SUMMARY Under limited supervision designs, develops and maintains test procedures, tester hardware and software for electronic circuit board production. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Review circuit board designs for testability requirements. Support manufacturing with failure analysis, tester debugging, reduction of intermittent failures and downtime of test equipment. Prepare recommendations for testing and documentation of procedures to be used from the product design phase through to initial production. Generate reports and analysis of test data, prepares documentation and recommendations. Review test equipment designs, data and RMA issues with customers regularly. Design, and direct engineering and technical personnel in fabrication of testing and test control apparatus and equipment. Direct and coordinate engineering activities concerned with development, procurement, installation, and calibration of instruments, equipment, and control devices required to test, record, and reduce test data. Determine conditions under which tests are to be conducted and sequences and phases of test operations. Direct and exercise control over operational, functional, and performance phases of tests. Perform moderately complex assignments of the engineering test function for standard and/or custom devices. Analyze and interpret test data and prepares technical reports for use by test engineering and management personnel. Develop or use computer software and hardware to conduct tests on machinery and equipment. Perform semi-routine technique development and maintenance, subject to established Jabil standards, including ISO and QS development standards. May provide training in new procedures to production testing staff. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS Bachelors of Science in Electronics or Electrical Engineering from four-year college or university preferred; or related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to walk, and to lift and carry PC s and test equipment weighing up to 50 lbs. Specific vision abilities required by this job include close vision and use of computer monitor screens a great deal of time. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Individual s primary workstation is located in the office area, with some time spent each day on the manufacturing floor. The noise level in this environment ranges from low to moderate.

1. Production Planning & Control Develop and implement production schedules in line with sales forecasts and customer requirements. Allocate resources effectively to meet production targets. Monitor production KPIs such as output, downtime, efficiency, and waste reduction. 2. Team Management Supervise and coordinate the activities of the production team including engineers, supervisors, and machine operators. Provide training and development to ensure team competency. Enforce discipline, safety, and adherence to company policies. 3. Quality Assurance Ensure all machinery produced meets technical and quality standards (ISO, BIS, etc.). Collaborate with the Quality Control team to implement and monitor quality systems. Investigate and resolve production issues and quality complaints. 4. Process Improvement Implement lean manufacturing, 5S, and Kaizen practices to improve operational efficiency. Identify bottlenecks and suggest/implement corrective actions. Participate in cost reduction initiatives without compromising product quality. 5. Coordination & Reporting Coordinate with R&D, design, procurement, and maintenance departments. Maintain regular production reports and present them to upper management. Liaise with clients for technical support and customizations when required. Role & responsibilities Preferred candidate profile

Omega Inspection & Analytical Laboratory is looking for Operator to join our dynamic team and embark on a rewarding career journey Operate machinery, equipment, or systems according to established procedures to ensure smooth and efficient production or service delivery Monitor equipment performance, perform routine checks, and troubleshoot minor issues to prevent downtime Maintain safety and quality standards by adhering to operational guidelines and reporting malfunctions promptly Keep accurate logs of activities, maintenance, or output Coordinate with team members and supervisors to ensure workflow continuity Participate in training sessions to stay updated with operational techniques and safety protocols Maintain cleanliness and organization of the work area

Start work with take 5. Checking of all press machine & its function. Hydro lick oil Level & its Leakage. Top force seal checking & condition. Reliving operator Observation & checking at your side. conditions of Previous material (Quality) & try to resolve the Running issue (Thickness Variation, Slurry Leakage, Operation related issue). Checking to trolley condition i.e. (trolleys condition will be ok). Proper training given to press Helper (safety related, press machine related Awareness etc). Good Coordination with inter-departments Providing necessary& safety related training to Press Machine Helper. Basic Knowledge on TPM Implementation of safety protocols Maintaining Shopfloor 5S. Compliances of Internal and external audits Knowledge on ISO/IMS standards

Visit client sites for installation and commissioning of Strapack machines. Perform preventive and breakdown maintenance. Diagnose faults, replace components, and test machine functionality. Provide on-site training to machine operators and supervisors. Service Reporting & Documentation Fill job cards and service reports post each visit. Capture and upload service data in Zoho FSM or assigned app. Take before/after photos or videos as needed for service records. Customer Interaction Explain issues, service actions, and preventive tips to customers. Maintain a professional and polite approach on client sites. Escalate unresolved issues promptly to Service Head. Inventory & Spares Carry necessary tools and spares for service visits. Coordinate with the central team for spare part requirements. Maintain accountability for tools and inventory issued. Compliance & Safety Follow all safety protocols during machine handling and servicing. Ensure machines are fully operational and safe before handover. Requirements Eligibility Criteria Education : ITI / Diploma / B.E. in Mechanical, Electrical, or Mechatronics. Experience : Minimum 1\u20133 years of relevant experience in industrial machine servicing. Hands-on experience in packaging or automation machinery preferred. Skills Required : Strong mechanical/electrical diagnostic skills Field servicing discipline Basic English and Hindi communication Benefits Other Details Job Type : Full-Time, Field Role Travel Requirement : 80\u2013100% (PAN India) Evaluation : Based on service closure rate, punctuality, and customer feedback Benefits & Growth Plan Allowances Travel Allowance : Reimbursed as per approved company slab for outstation visits. Food Allowance : Reimbursed as per approved company slab for outstation visits. Stay Allowance : Lodge stay covered or reimbursed as per grade norms. Career Growth Path Year Position Key Focus Year 1 Trainee Technician Basic machine servicing, shadow learning, SOP training Year 2 Jr. Technician Independent handling of Strapack machine servicing Year 4 Sr. Technician Lead technician for AMC clients and high-value sites

Job Title Assistant Facility Manager Job Description Summary Job Description [Please delete this section before finalizing the Job Requisition: Below is an example Job Description for this Job Profile, and may need to be updated to reflect the specific responsibilities of this role. Please also ensure that you validate the selection of the Job Profile and placement of this Position in the Job Architecture before finalizing.]ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Ensure the day-to-day operations of the facility(s) or campus, including janitorial, life-safety, engineering, site services, and general maintenance are implemented and carried out in a manner consistent with C&W policies and client directives. Ensure all contracts are reviewed on a regular basis and are bid out as required and confirm invoices match contract pricing Supervise all maintenance programs relating to the interior and exterior conditions and appearance of the properties Under the direction of the Facility Manager, respond promptly to requests for building maintenance, repairs, cleaning needs, etc. from building occupants and for the implementation of ongoing contract programs to address and resolve needs and problems Compile information necessary to ensure all site-specific documentation and reports are completed accurately and on time, including (and as applicable): Property Information Book, Site Operating Manual, Emergency Procedures Manual, IIPP Manual, Local Code Compliance Log, ADA Compliance Log, OSHA Log, Safety Meeting Log, Elevator Logs, Janitorial Log, Purchase Order Log, Vendor Certificates of Insurance, As-built Drawings, IIPP Manual, Paid Invoices File, General Files, Contract Files, Annual Property Conditions and Year- end Performance Report and other reports and documentation as required Prepares budgets, financial reports (monthly and quarterly), contracts, expenditures and purchase orders related to the facility(s) or complex as directed Assist in providing information and reports necessary for the development of capital budgets for the facility. This includes contributions towards a five-year plan of maintenance, facility improvement, and cost reduction initiatives Collect, analyze and prepare reports of such statistical data as may be required to provide accurate and current assessment of facility management objectives Expected to be thoroughly familiar with the management contract, vendor agreements, and other building/facility contracts and all requirements contained therein Monitor and ensure that tenants and vendors comply with insurance requirements and coordinate all claims as required Proactively inspect the facility, systems, rooms, common areas, etc. and report back any findings or issues to the Facility ManagerKEY COMPETENCIES 1. Communication Proficiency (oral and written)2. Technical Proficiency3. Problem Solving/Analysis4. Leadership5. Teamwork Orientation6. Relationship Management7. Financial ManagementIMPORTANT EDUCATION Associate s degree in facilities management, building, business or other related field required Bachelor s degree preferredIMPORTANT EXPERIENCE A minimum of 3-5 years relevant experience, preferably in commercial or industrial real estate with facility management experience required Experience in maintenance, construction, engineering and all facets of property operation and building management preferred CMMS/Work Order Management experience is preferredADDITIONAL ELIGIBILITY QUALIFICATIONS Certified Facility Manager (CFM), International Facilities Management Association (IFMA), Building Owners and Managers Association (BOMA) industry certifications recommended; other Engineering, Business or technical training or certifications a plus Ability to read and understand construction specifications and blueprints Proficient in understanding management agreements and contract language Skilled in Building Management Systems maintenance and monitoring Excellent computer and systems knowledge; Strong literacy in Microsoft Office Suite (MS Word, Excel, PowerPoint) Strong discipline of financial management including financial tracking, budgeting and forecasting Knowledge of Financial Systems (Yardi a plus)WORK ENVIRONMENT This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. May be required to travel outside between properties in varying weather conditions.PHYSICAL DEMANDSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.While performing the duties of this job, the employee is regularly required to communicate with others and exchange accurate information; operate a computer and other office productivity machinery; move about the workplace; remain in a stationary position for 50-75% of the time; and extend hands and arms in any direction.AAP/EEO STATEMENTC&W provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, C&W takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated.OTHER DUTIESThis job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.Note: This job description includes the core responsibilities for C&W. These duties may have slight modifications based on the regional location. INCO: Cushman & Wakefield

This scope covers high-tech intelligent sorter and conveyors and other all Material Handling Equipment s and Sort slides including Carts, Cages, Trolleys and Hand Pallet Trucks (CCTH). This also covers control and related hardware, software handling such as PLC, HMI, SCADA, VFD s etc. Ability to problem solve PLC code and complex fieldbus IO and SCADA systems. Understanding of Warehouse Control Systems and Telegrams. Experience either building, commissioning or problem-solving Electrical Controls and Instrumentation Panels. Ability to understand integrated MHE conveyor systems within the FC and the systems that interact outside of the FC. Ability to understand flow of processes. Understanding of Industrial communication protocols like ProfiBus, ProfiNet, Ethernet IP, and demonstrable ability to problem solve those systems. Experience of Barcode recognition technology. Experience Reading and Updating Electrical and Controls Schematics and Documentation, SOP s and VSOP s, Ability to analyse metrics and data and identify system and machine optimization opportunities Experience of Change Management processes. Work within a shift team and take the lead in resolution of controls related issues and improvements. Experience of commissioning special purpose machinery. Working knowledge of Machine Safety Regulations and Safe Working Practices. Basic understanding of IT systems like IP Networking, Server Architecture, SQL Databases. Experience working within Controls or Electrical Projects as part of a team. Basic Qualifications & Experience Min Qualification B.E. or B.Tech or Diploma in Electrical Engineering or Mechanical Engineering or Mechatronics Engineering or Industrial Automation Required Experience 1 to 3 years of working experience with Manufacturing or Service or Machine developers or warehouse industries. PLC programming and implementation experience with one of the following: Siemens S7, Allen-Bradley, Mitsubishi, Omron, etc. Project management, organization and problem-solving skills Good written and verbal communication skills. Ability to be able to operate with minimal supervision

Role purpose - Leads employees using machinery or equipment to assist with all manufacturing activities of a plant or production process, including production, materials, health & safety, quality control, and other steps along a production line. Operations Management Provide operational support services and sometimes act as first-line contact of a transactional operations area. Involves using existing systems and protocols. Operating Machine or Equipment Operate complex machines and systems, adjusting processes to optimize quality and productivity. Also responsible for generating solutions to complex inefficiencies. Production Planning Contribute data and information to production plans. Run reports, check accuracy, and distribute information. Leadership and Direction Coordinate a team while performing routine work. Equipment Changeover Help to changeover and conduct inspections of equipment with guidance. Equipment Total Productive Maintenance Troubleshoot and diagnose equipment for emergency repairs and carry out preventive maintenance routines. Work Scheduling and Allocation Organize own work schedule in order to get the job done, coordinating with support services and assigning short-term tasks to others if necessary. Health, Safety and Environment Follow the organizations Health, Safety and Environment (HS&E) policies, procedures and mandatory instructions; to identify and mitigate risks, and to safeguard the environment and the wellbeing of oneself and others. Quality Conduct complex analyses, quality tests and inspections that require a high level of independent judgment. Performance Management Prioritize own workflow and ensure work is completed to the required standards of quality and timeliness; use performance management systems to improve personal performance. Organizational Capability Building Provide coaching to team members to develop their skills. Operational Compliance Develop working knowledge of the organizations policies and procedures and of regulatory codes and codes of conduct relevant to own work, adhering to mandatory procedures to ensure own work is undertaken to the required standards. Internal Communications Use the internal communications system to access specific information. Improvement/Innovation Implement improvements and provide feedback on them. Use change management systems and protocols to provide routine supportive services. Skills Planning and Organizing Works without supervision and provides technical guidance when required on planning, organizing, prioritizing and overseeing activities to efficiently meet business objectives. Verbal Communication Uses clear and effective verbal communications skills without supervision and provides technical guidance when required on expressing ideas, requesting actions and formulating plans or policies. Health and Safety Applies comprehensive knowledge and skills to independently manage and apply safe systems of work while providing guidance and training to others. Policy and procedures Works without supervision and provides technical guidance when required on developing, monitoring, interpreting and understanding policies and procedures, while making sure they match organizational strategies and objectives. Action Planning Works without supervision and provides technical guidance when required on developing appropriate plans or performing necessary actions based on recommendations and requirements. Review and Reporting Works with guidance (but not constant supervision) to review and create relevant, lucid and effective reports. Equipment Utilization Uses comprehensive knowledge and skills to act independently while guiding and training others on optimizing the utilization of production plant, equipment and materials. Masters Service Conversations Works at an intermediate level to navigate customer conversations by leveraging the four parts of a service conversation: open, learn, reply, and close. Typically works with guidance. Education: Diploma or Equivalent Experience: Minimum 2-3 Years

Job Requirements Safety Deliver Health & Safety objectives in line with company Must Win Battles and ensure that site procedures are strictly followed by the team and contractors in line with site/Company standards and safety improvement plans. Planning: To set up and manage the Maintenance Department with a long term view of continuous improvement. To review internal performance and strategy in order to optimize the plant performance and efficiency. Predict the anticipated consumptions & purchasing requirements. Ensure adherence to Effective Maintenance Planning , preventive (SEF s & WP) Co-ordinate maintenance engineers efforts to make sure machinery / equipment is kept up to reliability and condition standards Identify areas for improvement and assign resources /time to address Contact and schedule contract resources and extra resourcing as needed To formulate and establish optimum spares holding levels To formulate and establish annual budgets for department. To formulate and develop capital expenditure plans for maintenance / replacement future investment needs. Define the needs, forward purchasing requirements and liaise with purchasing department. Monitor and record the variance of all maintenance budgets Oversee the installation, testing, operation, maintenance, and repair of facilities and production equipment. MWBs/Core Values Staff. Ensure the Maintenance Department is adequately resourced to allow the maintenance Day / Shift schedules to be maintained at all times. Define, implement and sustain an effective Maintenance Organisation Manage the Maintenance team To provide tight control and coordination of the development of all engineers To enhance the workforce training development and skill levels Ensure employees receive the appropriate training, with the appropriate modules, including 5S, TPM, 6 sigma, Kaizen, OEE. To establish and define training needs; to coordinate the training to ensure trainer and trainee understand and know the expectation/requirement of the training activity To measure the value and effectiveness of training provision To ensure the trainer has the required skills to train. To provide direct training to trainee as required. Taking into account the needs for shift cover define the roster and crewing levels to allow all operations to operate on time. Define and coordinate any overtime or as appropriate, the use of temporary/ agency workers Coordinate the placing of temporary workers, as necessary, with the employment agencies and HR dept Recruit employees; assign, direct, and evaluate their work; and oversee the development and maintenance of staff competence. Lean & 5S Initiatives Development of Lean systems and structures to aid and facilitate efficient maintenance process. Development of modern management techniques (Lean systems, value stream mapping, Kanban etc). Decide the necessary corrective actions and implement them to achieve all KPIs. Define and implement suggestions to improve the OEE of each line/function. All audits and controls for systems of work are executed at the desired frequency. Collaborate with the other departments: Operations, Purchasing, Sales, Engineering. Develop and implement reliability systems including preventive and condition monitoring activities to improve plant reliability. Customer & Quality Support the Customer focused vision of the Company. Maintain the fundamentals; Quality System, ISO 9001:2015 , Environmental standards, Health & Safety standards. Actively participate in new product release process to ensure manufacturing is capable to achieve required specification and ensure ongoing Continuous Improvement / line efficiencies. Make sure quality assurance procedures are respected. Ensure non-conforming machinery / testing equipment are properly maintained. Take part in process improvement, equipment development and investments:- Technical Norm Performance and Reporting The manufacturing / engineering standards are respected . Monitor the maintenance engineers performance with regard to MRP and technical norm performance for downtime and yield and other KPIs. Monitor for incorrect performance reporting. Take all required actions to correct and then prevent inaccurate reporting. Establish rules and procedures for this. Organise the maintenance schedule to optimise manning / equipment / cost Ensure adequate personnel cover for all aspects of maintenance operations. In case of process drift, define corrective actions. Analyse the daily report (24 hours) and maintain management reporting protocols and reports Produce the required management reports. Review / report on KPI performance and identify areas to improve. Act upon these improvements via the maintenance team and other resources. Take into account all the KPI Indicators which the department impacts (workflow, spare parts, workshop, lubrication, breakdown management, equipment reliability etc) develop strategies for improvement and implement. Process and analyse the data; report on developments and findings. Propose corrective actions as necessary during Morning Meeting. Take decisions within his field of remit, while keeping plant manager informed of the activities. Ensure budget constraints are respected. Make and implement improvement proposals. Develop the practice of Continuous Improvement throughout areas of responsibility. Data and records Development of continuous improvement processes (OEE). Develop and maintain accurate written procedures for the department and ensure these are followed. Report on the performance losses / Break Downs and implement corrective actions. All equipment has appropriate records, manuals, certification, PUWER assessments etc. These records are kept up-to-date and are current. Ensure all modifications to plant and process equipment are recorded, approved and compliant with all standards, follow MOC (Management of Change) Process, follow internal and external regulations. Hygiene of Internal External Areas associated to your Responsibility & Waste Control The plant is a safe environment to work in The plant hygiene is maintained to high standards at all times. Change work ethic and culture towards a principle of self-starting and continuous improvement behaviour. Undertake regular plant tours. Ensure 5S & cleanliness procedures in the work shop are adhered to. React to any drift; liaise with shop floor to maintain standards. Direct and facilitate the resources to ensure standards are maintained. Ensure equipment is fit for purpose. Propose new measures to take away drift in behavior. Management activity: The company policies are distributed and explained to all personnel. Employees are competent and motivated. Any fall in standards is arrested and rectified immediately. Make improvement proposals. Give opinion on the performance of engineers. Propose sanctions. Motivate employees. Act as an interface role. Support Management. Participate within Plant Management - operations, quality meetings etc. Participate in the implementation of corrective actions. OTHERS Develop and implement strategies that accelerate and improve current maintenance practices and processes to improve equipment performance, reliability and lower repair costs. Initiate, implement, and manage the plant maintenance programs based on best practices in our industry, with an emphasis on equipment condition inspections, planning/scheduling, high quality maintenance repairs, and safety, health & environmental policies and procedures. Analyze operational data and equipment performance history to deliver improvements in critical maintenance related metrics including: unplanned downtime, PM compliance, schedule compliance, Mean-Time-Between-Failures, and maintenance related costs. Coordinate with cross-functional departments (Engineering, R&D, Supply Chain, etc) to ensure operational effectiveness in life cycle cost considerations in equipment procurement activities. Develop and deliver comprehensive maintenance and reliability tactical training to maintenance resources. Leverage company subject matter experience/experts to advance current maintenance and reliability efforts through enhanced communication and best practice sharing by driving their application. Partner with worldwide operations group to coordinate maintenance activities in support of operational excellence. Regularly respond with advice to maintenance/equipment related questions, ensure access to up-to-date maintenance/operating procedures, and facilitate strong team communications activities. Establish, maintain, and leverage value from a computerized maintenance management system (CMMS) for tracking work orders, planned/predictive maintenance. Identify required equipment and process upgrades and effectively manage associated projects. Ensure accuracy in spare parts inventory and develop system as appropriate.