107 Iso 26262 Jobs - Page 4

Responsibilities: • Embedded Software Development in C • Design and development of software based on Autosar architecture • Integration & verification of the developed SW components • Debugging and error analysis • Create design documents • Participate in Design & Code reviews Qualifications: • University degree in Electrical/Electronic engineering, Computer Science or similar • Minimum 5 years of Embedded Software Development experience in Automotive Domain • Proficient in C programming • Strong working experience on AUTOSAR architecture (DIAG & COMM) • Good knowledge of vehicle networks: CAN, Ethernet, FlexRay. • Working knowledge of ISO26262, ASPICE • Familiar with tools like DaVinci Conf...

Role & responsibilities Responsible for development of customer specific embedded software architecture for Electric Control Units:• Definition and Maintenance of Software Architectures of Climate Control Systems.• Collaboration with Customers and internal Stakeholders to create technical • Realization Concepts following Software Requirements • Performing Software Safety analysis according to ISO26262 • Performing Software quality to meet desired SPICE level. • Being aware and applying state of the art software architecture methodologies • Active participation and responsibility in each phase of projects from start to production Preferred candidate profile Well versed in AUTOSAR components' ...

Must have experience safety and diagnosis calibration domain diagnostic tools and software (CANalyzer, Diagnostic Link, INCA), functional safety standards (ISO 26262) safety analysis techniques (FMEA, FTA), ECUs,, diagnostic protocols ( OBD-II, UDS). Required Candidate profile Min 8 years of experience in Powertrain (engine or transmission) safety and diagnosis calibration domain Min 2 year of experience to manage complete project delivery. Should be BE/B Tech /ME/ M. Tech

The task is to develop the Safety concepts for these safety-related system functions for MCUs. Create hazard assessment and risk analysis (HARA). Perform IP, SoC, DFEMA. Develop FuSa Level3 software for MCU. System knowledge ASIL B, C or D system. Required Candidate profile SEOOC(Safety Element Out of Context), FFI (Freedom From Interference) FIT(Failure Intime) Rate Functional Safety Certified – Level 1 / Level 2 / Level 3

Role & responsibilities Minimum of 2 to 5 years of experience in wiring harness design, with at least 2 years working in electric vehicle or automotive design in Schematics.. Proven experience with the design and development of electrical systems and wiring harnesses for vehicles (Conventional or EV, Hybrid, PHEV, Commercial vehicle or passenger vehicle ). Ensure wiring harness designs comply with all relevant standards, regulations, and best practices, including ISO 26262 (Functional Safety) and ISO 9001 or IATF 16949 (Quality Management). Use advanced CAD software - Capital XC to design and model wiring harnesses, ensuring high-quality designs Resource Design: Expertise in wiring harness d...

Responsibilities: Conduct comprehensive safety assessments and risk analyses for automotive systems, components, and manufacturing processes to identify potential hazards and ensure compliance with safety standards. Develop, implement, and continuously improve safety protocols, procedures, and guidelines in alignment with industry regulations such as ISO 26262, OSHA, and company policies. Investigate safety-related incidents, near-misses, and failures; perform root cause analysis and recommend corrective and preventive actions to mitigate future risks. Collaborate with cross-functional teams including design, manufacturing, and quality assurance to integrate safety features into product deve...

1. At least 8 years of embedded firmware development experience and proven expertise in C programming and embedded software design best practices. 2. Strong experience with RTOS (FreeRTOS, Zephyr, OpenBSW, or similar) including task scheduling and memory management. 3. Proficiency in shared memory architectures, synchronization primitives, and inter-core communication. 4. Strong understanding of microcontrollers (ARM Cortex-M/R/A series), bootloaders, and peripherals. 5. Hands-on experience with communication protocols: SPI, I2C, UART, CAN, Ethernet 6. Proficient with debugging tools: JTAG, SWD, oscilloscopes, and network analyzers 7. Familiarity with embedded safety/security standards (ISO ...

Role: Electric Vehicle Powertrain System Engineer Responsibilities: Understand electrical architecture of HEV/EV Define the system diagram of the EV Powertrain system Define the controller architecture, interfaces (electrical and physical), and functions for powertrain system of EV Define the high level and detailed requirements for powertrain systems and controls for EV, including sizing requirements Develop the powertrain functions and software, including logic development, MIL evaluation, HIL evaluation and vehicle level validation using MBD approach Develop diagnostics for powertrain controllers Implement ISO 26262 Functional Safety requirements Functional Testing, System/Component Bench...

Role: Hybrid and Electric Vehicle Traction Motor/Inverter Control Engineer Responsibilities: Define HEV/EV Traction Inverter Electrical System Architecture Drives functions and Control algorithms such as State transition Diagram Conditions, Torque control (Protection restriction), Thermal behavior estimations management, Vehicle Adhesion Controls Inverter Controls Software Verification and Validation ISO 26262 compliance for Traction Inverter ECU, DFMEA Work with System team to identify the electrical interfaces calibration Functional Testing, System/Component Benchmarking Technical/ Functional: Knowledge of Power electronics in Electric Vehicle and its Components Knowledge of Electric drive...

Understand electrical architecture of HEV/EV Understand the high-level performance requirements of vehicle Define the IO operation for torque control and torque control flow Define the target torque control requirements Define the torque damping control requirements Define the torque limitation control requirements Define the torque control requirements for advanced functions such as one-pedal drive and e-4WD implementations Develop the concept and details of drive modes and pedal maps Develop the detailed functions and logic for various torque control strategies Develop the controller functions and software, including logic development, MIL evaluation, HIL evaluation and vehicle level valid...

Electric Vehicle Charging System & Controls Engineer Responsible for the development, design, and implementation of EV charging system & controls Understand EV charging system, different methods/modes & its associated components (connectors, cable etc.) Knowledge of EV charging protocols (viz., CHAdeMO, CCS2) and experience of implementation Define the high level and detailed requirements for charging systems and controls for EV Integration of Charging functions with electric vehicle control unit Develop the charging functions and software, including logic development, MIL evaluation, HIL evaluation and vehicle level validation Functional Testing, System/Component Benchmarking, and database ...

My profile - linkedin.com/in/yashsharma1608 only those who can come walkin on 5th july - banglore Role - Android Developer (Kotlin programming) Experience - 6+ Years Client - MBRDI Location- Bangalore [on-site] Budget - 13L [Max] Job Description: (Kotlin Programming)" "Kotlin Programming: Strong experience in Kotlin, specifically for Android development. Static Code Analysis (SCA): Hands-on experience with SonarQube, including writing custom rules and plugins. SCA Framework Development: Ability to design and maintain a scalable SCA framework tailored for Android projects. Automotive Compliance Standards: * Understanding of MISRA guidelines (adapted for Kotlin). * Familiarity with ISO 26262 (...

Key Responsibilities: System Architecture Design: Develop and define scalable and robust architectures for automotive infotainment systems, ensuring seamless integration of hardware and embedded firmware components. Cross-Functional Collaboration: Work closely with hardware engineers, firmware developers, software teams, and validation specialists to ensure cohesive system development and integration. Technical Leadership: Provide guidance and establish best practices in system design, overseeing the selection of technologies, microcontrollers, operating systems, and communication protocols. Compliance and Standards: Ensure all designs comply with automotive industry standards, safety regula...

Roles and Responsibilities: Skillset: Good understanding of ISO 26262. Road vehicles - Functional safety and its methodologies Should have worked for minimum 2-3 years in Automotive Functional Safety Knowledge of Functional Safety life cycle as per ISO26262 Hazard analyses Risk Assessment Functional Safety requirements Technical Safety requirements Safety at Software Hardware Level Should have experience of working on safety analysis like FMEA (Failure Modes and Effect Analysis), FTA (Fault Tree Analysis), DFA (Dependent Failure Analysis) for system / software / hardware Should have experience of Hardware Architecture metrics (FMEDA) and PMHF analysis as per ISO26262 requirements. Experience...

Looking for 5+ years of experience in automotive industry Main tasks Plan SQA activities aligning with project plan and timing. Set performance metrics Identify and meet stakeholders: software project manager, component owners, software developers, software testers, software process leads, etc Conduct reviews of software work products and deliverables for the software developed in house Conduct reviews of software work products delivered by suppliers Support ECU owners during joint reviews with suppliers Track deliverables and monitor and measure the quality of the software, updating and analysing metrics Identify and track gaps and defects in the software work products Identify and address ...

Job Title: Senior Cybersecurity Engineer Location: Bangalore Department: Engineering & Product Development Experience: 8-10 Years Compensation: 25-30 LPA Job Description: AutoSec Innovation is building next-generation Automotive cybersecurity solutions and products. Were looking for a technically strong and self-motivated Engineer who can drive the design, implementation, and mentoring activities across CyberSecurity, AUTOSAR, Functional Safety, and Embedded domains for ECUs like IVI, Telematics, and Infotainment, ADAS. This role is for a hands-on leader who will own technical architecture decisions, oversee a Engineering team and collaborate closely with business and delivery to help build ...

Role Responsibilities: Lead architectural design and evolution of the Robofit Test Framework Mentor a 15+ member development team across regions Collaborate with stakeholders to align solutions with business and technical goals Ensure compliance with ASPICE, ISO 26262, and cybersecurity standards Key Deliverables: Deliver a scalable and robust Python-based test automation framework Implement cost-effective, high-quality solutions within automotive industry standards Drive team capability building and mentorship initiatives Integrate cybersecurity testing methodologies including fuzz and penetration testing

We are looking for an Immediate joiners only. Must Have: Strong hands-on experience in Embedded C programming. Experience with Bootloader development . Proficiency in CAN , UDS , and J1939 protocols. Experience working with low-level driver development . Nice to Have: Exposure to AUTOSAR or other automotive software architectures. Familiarity with software testing frameworks for embedded systems. Experience in tools like Vector CANoe , CANalyzer , or similar.

About the team : Be part of a dynamic team developing cutting-edge automotive software aligned with ISO 26262, ASPICE, and MISRA C standards. We're looking for a skilled Embedded Software Engineer with expertise in AUTOSAR BSW, Bootloader, and Automotive Cybersecurity. What you can look forward to as AUTOSAR Developer (m/f/d): Integrate AUTOSAR Crypto modules (CSM, CryIf, Crypto), vHSM modules, updater, and Escrypt drivers Analyze security requirements and derive PSW requirements. Design and implement code per AUTOSAR and coding standards. Own modules and coordinate with architects, integrators, and validation teams. Follow QAC, Polyspace, code reviews, unit and developer testing. Your Profi...

Role & responsibilities 1.Software design and development as per AUTOSAR architecture. 2.Embedded C with good Application software development experience for Li+, Na+ battery packs. 3.Experience in handling functional safety software development as per ISO26262 standards 4.Should have experience in developing software CAN, UDS, LIN, (As per J1939) 5.Should have involved in defining software product, variant software management Preferred candidate profile

About ZF ZF is a global technology company that supplies systems for passenger cars, commercial vehicles, and industrial technology, driving the next generation of mobility. Our innovative solutions enable vehicles to see, think, and act across four key technology domains: Vehicle Motion Control, Integrated Safety, Automated Driving, and Electric Mobility. We offer comprehensive product and software solutions for both established vehicle manufacturers and emerging transport and mobility service providers. ZF electrifies a wide range of vehicle types, contributing to reduced emissions, climate protection, and enhanced safety in mobility. About the Role: We are seeking a highly skilled and mot...

Role & responsibilities Job Title: Mix Signal ASIC/IC Functional safety engineer/manager Job location: Bangalore Work mode: Hybrid Mode of employment: Permanent / Direct Company Payroll OVERVIEW: Seeks a dynamic and experienced Mix Signal ASIC/IC Functional Safety Engineer & Manager to join the Sensor Global Quality Engineering Center within its Sensors Quality Organization. This role focuses on ensuring the compliance to Functional Safety requirements of sensor products from project definition to production release for Automotive and Industrial & Transportation (ICT) markets. This role will engage with various Engineering Centers of Expertise and manufacturing plant globally. It is a strate...

Looking for 5+ years of experience in automotive industry Main tasks Plan SQA activities aligning with project plan and timing. Set performance metrics Identify and meet stakeholders: software project manager, component owners, software developers, software testers, software process leads, etc Conduct reviews of software work products and deliverables for the software developed in house Conduct reviews of software work products delivered by suppliers Support ECU owners during joint reviews with suppliers Track deliverables and monitor and measure the quality of the software, updating and analysing metrics Identify and track gaps and defects in the software work products Identify and address ...

Role Overview As Senior Manager, Test Automation, you will lead thedevelopment of the software infrastructure used for testing Aevas nextgeneration 4D LiDAR sensors. You will oversee the development of the entiretest software stack used for firmware, perception, components and systemtesting. You will also work with cross-functional teams to drive software andfeature development and testing, ensuring complete test coverage throughout theproduct life cycle. What you'll be doing: Lead, mentor, and develop a team of skilled engineers dedicated to designing, implementing and maintaining automated test infrastructure Architect, design, and develop a robust and scalable Python and C++ based softwar...

We are seeking a highly experienced Functional Safety Expert with a strong automotive background to join our team as a Product Manager. The ideal candidate will have over 12 years of experience in functional safety and a proven track record in managing automotive products. This role requires a deep understanding of automotive safety standards, exceptional leadership skills, and the ability to drive product development from concept to launch. Key Responsibilities: Lead Functional Safety Initiatives: Oversee and manage all functional safety activities for automotive products, ensuring compliance with ISO 26262 and other relevant standards. Product Management: Define product vision, strategy, a...