DESCRIPTION The Security Manager is responsible for the Cybersecurity tasks related to a single development project. This includes: • Analysis of Cybersecurity Requirements provided by the OEM; • Providing a first point of contact for all engineering related cybersecurity questions referred to the project; • Development of the Cybersecurity specific work products for the project (Item Definition, Threat Assessment and Risk Analysis, Cybersecurity Concept, Cybersecurity Case) according to the PDP; • Maintenance of Cybersecurity specific work products over the whole project lifecycle; • Analysis of potential threat scenarios and vulnerabilities and coordination of remediation actions for the security incident response; • Support in developing a cybersecurity fortified system- and software architecture in cooperation with the System and the SW Architect; • Support of Cybersecurity related testing issues. KEY TASKS The Security Manager is responsible for the execution of the Cybersecurity related process steps in accordance to the PDP in order to assure the product degree of security in compliance with Quality/Costs/Timings. • Development of a Cybersecurity Item Definition according to the PDP; • Evaluation of all Cybersecurity Requirements provided by the OEM; • Ensuring the traceability of all Cybersecurity Requirements; • Conducting the Threat Analysis and Risk Assessment according to the PDP; • Development of a Security Concept according to the PDP; • Creating the Cybersecurity Case document; • Participation in the Change Request Management Process; • Participation in the Configuration Management Process; • Participation in the Problem Resolution Management Process; • Participation in the Project Management Process (especially for planning issues regarding Cybersecurity). The Security Manager is reporting to the Project Manager. GRANTED POWERS The rights and granted powers to the Security Manager are: • Evaluation (Accepting and Rejecting) cybersecurity requirements in coordination with the security officer; • Assessing security risk related to the project; • Selection of security countermeasures for risk mitigation; • Request all relevant information from development departments for the development of the Cybersecurity work products as defined by PDP. TECHNICAL REQUIREMENT In order to fulfill the position appropriately, a candidate for the Security Manager has to provide the following knowledge and abilities: • Knowledge in system architecture in the field of BHTC-products. • Excellent technical knowledge and experience in the development of automotive control units, preferably on the system level. • Cross-departmental methods (hardware, software, mechanics). • Ability to give presentations on cybersecurity to internal and external audiences. • Experiences with embedded systems in the automotive industry. • Profound know-how in the field of cyber security and cryptography, preferably in the context of embedded systems. • Knowledge of cryptographic network protocols and/or IT security. • Knowledge of typical hardware and software security mechanisms preferably used in the environment of automotive ECUs as well as common cryptographic algorithms is desirable. • Knowledge of related standards (UNECE R155, ISO/SAE 21434, ISO 26262, ISO/IEC 15504) • Knowledge of change management. • Knowledge of configuration management. • Knowledge of the BHTC processes. • Special tool knowledge: o MS-Office o DOORS o Configuration management tools (preferably PTC Integrity) o Requirement management: DOORS
Role & responsibilities To provide assistance to KAM and Head- Sales and Marketing in Day-to Day Sales activities. To Support KAM in managing business from assigned customers to meet acquisition and sales goals . To Build BHTC brand at Customer place and build relationship. To follow up with Customer on day-to-day basis for open point closure. To support KAM in Change management Implementation To collect competitor information and market trends. To provide weekly MIS for Plan vs Actual of Parts Sale, Tool and D&D Invoicing To keep a close follow up of Accounts receivables/Pending Payments and share Receivables Ageing report with each KAM. To take regular Payment follow up with the customer & submit all the required documents/Part samples. If required to visit customer end. To raise query in Customer portal regarding payment deduction/Advice /Survey/PO release. To access customer portals for monitoring the GRN Reports, Payment advice, Purchase orders . To upload e-Invoices on Customer Portal wherever applicable To safely store all Commercial Documents like Part, Tool and D&D POs for each project/customer in common folders in an organized manner for easy access to the concerned team members To assist Sales Team in creation of SAP Sales Orders, Scheduling Agreements, PR, Sales register/Customer Aging and SAP related activities. To practice ISO 14001 &TS16949 process in Marketing. To arrange customer/competitor samples for benchmarking. Preferred candidate profile BCOM, Diploma in Engineering, Experience - 2 to 3 years in automobile industry
Role & responsibilities Responsible for development of customer specific embedded software architecture for Electric Control Units:• Definition and Maintenance of Software Architectures of Climate Control Systems.• Collaboration with Customers and internal Stakeholders to create technical • Realization Concepts following Software Requirements • Performing Software Safety analysis according to ISO26262 • Performing Software quality to meet desired SPICE level. • Being aware and applying state of the art software architecture methodologies • Active participation and responsibility in each phase of projects from start to production Preferred candidate profile Well versed in AUTOSAR components' design with strong experience in embedded 'C' coding. Good system level knowledge.• Strong understanding of AUTOSAR architecture and concepts - BSW, RTE and SWC.• Proven experience with automotive SPICE standards. • Must have understanding of various SW BSW modules (Com/Memory/Watchdog/ IO/ Diagnostic Stack etc.). • Must have knowledge of configuration and implementation MCAL drivers (DIO/ADC /I2C/EEPROM/PWM/CAN/LIN etc.). • Must have knowledge of Software Development life cycle, proven experience with Automotive Software development. • Knowledge of Rhapsody and UML will be an added advantage. • Outstanding Communication and problem-solving skills.
Role & responsibilities Over 3 years of experience in Atlassian Jira administration, including workflow and field customization. Proficient in Groovy for Jira scripting and automation with ScriptRunner Experience in JavaScript, Java is advantageous Good experience with JQL Experience with A SPICE is an advantage. Skilled in integrating innovative methods and automation into Jira processes. Open, communicative team player with experience working in global teams. Basic knowledge of agile frameworks, with practical experience in Scrum and Kanban. Strong English communication skills for global training and documentation. Supporting the Project Teams in preparing project reports and dashboards to track project progress and performance metrics. Support the development of Jira. Assist in maintaining PMO standards, best practices, and methodologies in Jira to improve project efficiency and quality. Provide training and guidance on PMO processes in Jira and tools to project team members as needed. Ensure consistent and transparent communication with stakeholders on project status, risks, and changes within Jira. Preferred candidate profile Problem-solving and analytical skills. Adaptability to work in a fast-paced environment. Proactive and willing to take initiative. Flexible and willing to adjust responsibilities to align with developing business needs
Role & responsibilities - Creating the directive-compliant product- and part structure in the CAD for the functional module (Modular, ready to change, ..) Developing of design solution corresponding to the specification requirements in co-ordination with the ME (concept responsibility) and the SDE Integrate and guide Engineering Service (ES) for the functional module Verification and tracking of the functional module design regarding function, robustness and manufacturability (Tolerance evaluations, FEM, Light simulation, Mold Flow,) Assisting in the schedule tracking of the work packages of the concerned functional module Assisting in the specification documentation in Doors related to the functional module Communication of design changes related to the basic concept (allocation status) with the ME and SDE related to the functional module Assisting during the creation of the FMEA for the functional module area Assisting during the creation / maintenance of the part history for 2D/3D-Data for the functional module Assisting during the creation and maintenance of the BOM for the functional module Content preparation of the mechanical proportion of 3D/2D Design reviews for the functional module Supporting of all development activities of the opto-mechanical systems on the functional module level Preferred candidate profile - Command on CAD-Programs (e. g. CATIA and/or UG) 3D Competency in mechatronic, plastic technology, metal technology, automobile Basic knowledge in light technology, plastic tools, spraying process, electronics-hardware, circuit connectors, PCB technology, Vehicle climate control and quality. Basic knowledge of the specified characteristics of design materials (Material and additives, metals, contact materials) regarding production tolerances, surfaces- and friction characteristics, shrinkage, warping, hardness and strength etc. Basic knowledge of the surface technology (Varnishing, lasering, galvanization, foil technology, etc.) Basic knowledge in the sensors (e.g. detection of angle of rotation, switching function, non-contact actuation) Experience in the product data management (PDM) Core-competencies: CATIA / UG MS-Office DOORS / Change (Basic knowledge) PDM / Team center
Role & responsibilities The System Engineer is responsible for analyzing the customer requirements and transforming the system requirements into a suitable form in order to be able to develop the system. This includes: Structuring and analyzing the customer requirements and other valid documents Creating the System Requirements Specification Keep all system requirements documents up to date The System Architect is responsible to develop the system architecture based on the system requirements specification. This includes: Development of system elements based on the system requirements; Specifying interfaces between the system elements; Decomposing the system requirements into suitable domain requirements. Preferred candidate profile In order to fulfill the position appropriately, a candidate for the System Engineering shall have following knowledge and abilities: Deep technical knowledge and experience in the development of automotive control units/products, preferably on the system level Deep knowledge in requirements engineering Experience in the creation of requirement specifications General knowledge in control unit system tests, change and configuration management Knowledge in system architecture Knowledge of (sub-) systems (like SW, HW and Mechanical) and their interfaces Practical experience in architecture design Ability to abstractly describe complex coherences High communicative competences Experienced in model-development for complex systems: SA/SD (structured requirement analysis and structured design) UML (structure diagram) Special tool knowledge: MS-Office DOORS Rhapsody Configuration management tools (preferably PTC Integrity).
Role & responsibilities Responsible for SW-HW project management including Planning, monitoring & execution of HW-SW development in projects. Reporting of the progress of the project. Responsible for meeting Project timeline & meeting budgeted investment. Implementation and validation of requirements. Leading the development and integration of the hardware- and software-system while respecting the required maturity level Change management: Asses and implement HW- and SW-change requests Preferred candidate profile Core competences in electronics, software, automotive development 3 - 5 years in Software- Hardware project management Being competent and confident in dealing with customers General knowledge of the area project management, change management and personnel management Knowledge of Requirements management & analysis, HW-SW-system design and system test, Configuration management Hands on tool knowledge for MS-Office, Project-planning tool (e.g. MS-Project), Microsoft SharePoint, SAP (basic knowledge) etc. are desired Should have knowledge of Configuration management tools like MKS and DOORS Perks and benefits 8 days work from home per month Free access to LinkedIn Learning Canteen Facility that takes care of breakfast, lunch and snacks Workshops like customer engagement, German Literacy Program, First time managers, Advanced Excel, Finance for Non Finance etc.
Role & responsibilities Software Developer will be responsible for Analysis of requirements, implementation, testing and documentation of Automotive Software components (Diagnostic) Responsible for maintaining quality of Software deliverables & Review. Candidate will be involved in entire Software development Life cycle. Preferred candidate profile Well versed in C coding according to Misra standards, must have Automotive experience CAN/LIN communication knowledge. Good understanding in SDLC. Self-driven, Motivated. Hands on experience in Embedded Software Development, Embedded C. Should know Software Development life cycle. Experience in AUTOSAR with Diagnostic Error Manager and DCM implementation. Working knowledge of Automotive Communication Protocol like CAN, LIN and Diagnostics (ISO 14229, UDS on CAN/K-line). Transport Protocol Standards (ISO 15765) Experience with Vector tools like CANoe, CANalyzer, Geny, CANdela, ODX, Vector Davinci Developer, Vector Configurator Pro etc. Experience with VW Specification would be added advantage.
Role & responsibilities Acting as SPOC on behalf of the company being fully accountable and empowered to drive the project to success, respecting the quality management system and PDP (including roles & responsibilities, processes, methods and tools). Single point of contact for Program & cascade customer requirements to Project Team. Responsible of all aspects of Project Delivery execution for a specific customer, from RFI/RFQ to Launch and up to final hand-over to series quality team. It covers creating long term customer intimacy at several management levels through achieving customer satisfaction and establishing strong relationship. Accountable for negotiating the scope of new business with customer. Create customer-focused strategies and value propositions. Leading national and international projects and being accountable for cost, schedule, technology, quality and stakeholders acceptance throughout the product development process (PDP), including acquisition, development and series phase. Leading the project to a technical and commercial success based on the project contract, applying BHTC project management methods and best practices along the PDP considering the BHTC quality management system. Make and enforce sound decisions, to meet the project goals, applying BHTC decision - making guidelines. Assemble project team, in coordination with the functional department heads and create team spirit as well as assigning work to the project team, coordinating and prioritizing the execution of workpackages and tasks according project goals. Perform self - assessments to proactively and foresighted minimize uncertainties and risk to pass the gate reviews and obtain approvals from the Steering Committee for alternative solutions, continuously optimize and improve all aspects of the project. Manage change requests and claims ensuring proper communication, comprehensive impact analysis, fitting implementation planning and prioritized execution. Build a trustful and reliable environment, promoting required awareness and ensuring correct, timely and transparent communication based on an auditable documentation. Encourage, consolidate and optimize the project business case in coordination with the departments, obtaining the total release and ensuring compliance with requirements for R&D and investment budgets and product margin. Prepare and conduct necessary and regular internal and external status meetings for internal stakeholders as well as customers and suppliers, if necessary with the participation of departments. Experience with different customers (OEM's) national & international Preferred candidate profile Product development cycle of automotive Climate control panels, Basic design elements of Haptics, HW/SW & Optics, validation, Quality issues. Product development cycle of automotive infotainment Display, Basic design elements of HW & Optics, validation, Quality issues. Experience with hardware and software-based products both in development and production environments. Manage JIRA project configurations, boards, and workflows to support clear visibility and accountability across engineering, design, QA, and marketing.