5199 Circuit Jobs

The Opportunity Design authority for an engineering discipline with low to medium complexity. Complete assignments on small projects or portions of larger projects, cost-effectively and in accordance with contract specifications, quality standards and safety requirements. Based on technical specification from end customers and inputs from OU Engineering team, prepare Protection & Principle SLD, Schematics, Power supply scheme, Substation layouts – plan & sections, Standard technical specifications for major equipment, R&D activities to improve the work process, Comparison between AIS, GIS & PASS solution, Cost comparison between different solutions, Bill of materials, RFQs, vetting of vendor offers, engg hours estimation, technical risk assessment and opportunity evaluation etc. How You’ll Make An Impact Design authority for all engineering activities for assignments on projects classified as Low and Medium engineering complexity. Support Project Manager for any technical issues. SPOC with customer for Engineering activities of the project. Participate in customer meetings, act on customer needs, expectations and improve customer experience. Lead, supervise and coordinate engineering project team: scope, schedule & progress, approvals, budget, targets, resource load & cost-to-complete [Engineering Meetings / Engineering Review]. Ensure Engineering processes are applied and if needed agree on scaling with Engineering Manager. Conduct Engineering Project Reviews and report progress and cost-to-complete to Engineering- and Project Manager and establishes contacts with suppliers for technical support, to improve material quality and/or to decrease costs. Technical Obtains prototype product and develops technical tests. Ensure the deliveries as per schedule and carry out regular reviews Having Primary / Secondary design expertise and able to deliver transmission and distribution projects and preparing standards and focus on continuous improvements both technically and functionally Check if quality process is applied by all contributing engineering parties. Escalate to QA/QC. and track and handle technical issues and follow up. Handle clarification where more than one domain/function/party is concerned plus those topics that cannot be allocated to an engineering domain. Initiate mitigation of possible responsibility gaps in the project team. Coach and develop project engineers / designers to deliver their maximum potential, plan the skill development needs for the engineers Identify, track, clarify & drive project change cases that relate to engineering scope. Support claim preparation (client & supplier). Initiate and drive corrective actions. Collect and consolidate project risks and opportunities from engineering team, technical, but as well related to engineering progress, information/data availability and assumptions taken. Define, coordinate & take proactive actions to mitigate risks and lead to opportunities. Follow-up. Take calculated risk in pursuit of results and speed Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background Should have Bachelors Engineering in Electrical. Should have 10-12 years' experience. Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc and knowledge of HV grid power systems. Good understanding of civil and structural design elements of substations, such transformer bunds, cable troughs, ducts, support structures, substation access roads, etc. and prepare, review and validate Bill of material for tenders or projects based on requirement. Know-how on design calculations related to Primary Engineering and grounding system design, drawings and Bill of Materials. Proficiency in required CAD design tools (Autodesk Revit, 3D competence preferred) and proficiency in required Engineering calculation tools. Knowledge of relevant international standards ex. IEEE, IEC etc. and knowledge in substation tendering and project engineering activities (technical & commercial) Individual contributor using in-depth knowledge in a specific area to execute complex or specialized projects / challenges often thinking independently to challenge traditional solutions and comprehensive knowledge of related disciplines in the organization and works independently, applying established standards. Strong communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams. Attention to detail and a commitment to delivering high-quality digital solutions. Hitachi Energy is a global technology leader in electrification, powering a sustainable energy future through innovative power grid technologies with digital at the core. Over three billion people depend on our technologies to power their daily lives. With over a century in pioneering mission-critical technologies like high-voltage, transformers, automation, and power electronics, we are addressing the most urgent energy challenge of our time – balancing soaring electricity demand, while decarbonizing the power system. Headquartered in Switzerland, we employ over 50,000 people in 60 countries and generate revenues of around $16 billion USD. We welcome you to apply today.

The Opportunity Responsibilities may include Managing projects / processes, working independently with limited supervision. Coaching and reviewing the work of lower-level professionals. Problems faced are difficult and sometimes complex. How You’ll Make An Impact Primary Engineering Deliverables. Experience in handling complete Engineering deliverables for AIS & GIS projects, Exposure to International experience & Standards IEC, IEEE & AS. Substation layouts and section drawings, Grounding system drawings, Lightning system design, drawings, Cable routings, Cable tray routings, Clearance drawings. Understanding of auxiliary design aspects of substations, such as LVAC / LVDC supplies, Cable sizing, Battery & Battery Charger Sizing, etc. Technical data sheets verification of primary equipment. Knowledge of primary equipment, such as circuit breakers, disconnectors, earthing switches, instrument transformers, power transformers, etc. Vendor Offer Evaluations. FAT / SAT of primary equipment, system as and when needed. Technical risk and opportunity assessment and validation Innovative ideas to reduce Engineering effort. Plan, implement, review and continuously improvise quality system & follow Opex initiatives. Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background Bachelors Engineering /Diploma in Electrical. Should have 7-10 years of experience. Proficiency in required CAD design tools (BIM Tools, BIM 360, Navisworks, Microstation / AutoCAD, AutoCAD REVIT, 3D competence). Knowledge of relevant international standards ex. IEEE, IEC,etc Knowledge in substation tendering and project engineering activities (technical & commercial). Individual contributor using in-depth knowledge in a specific area to execute complex or specialized projects / challenges often thinking independently to challenge traditional solutions. Comprehensive knowledge of related disciplines in the organization. Works independently, applying established standards. Excellent English speaker, good communication skills. Dynamic and Proactive, willing to grow in the organization. Team player, ready to play the role across the different countries. Hitachi Energy is a global technology leader in electrification, powering a sustainable energy future through innovative power grid technologies with digital at the core. Over three billion people depend on our technologies to power their daily lives. With over a century in pioneering mission-critical technologies like high-voltage, transformers, automation, and power electronics, we are addressing the most urgent energy challenge of our time – balancing soaring electricity demand, while decarbonizing the power system. Headquartered in Switzerland, we employ over 50,000 people in 60 countries and generate revenues of around $16 billion USD. We welcome you to apply today.

Job Title: Restaurant Operations Manager Location: Thalassa, Siolim, Goa Industry: Hospitality / Fine Dining / Nightlife Employment Type: Full-Time Reporting To: General Manager / Ownership About Thalassa: Thalassa is Goa’s premier Greek restaurant and nightlife destination, famous for its sunset views, signature Mediterranean cuisine, and high-energy nightlife in Siolim. As we continue to expand our legacy, we are looking for a passionate and disciplined Restaurant Operations Manager to uphold and elevate our guest experience and operational standards. Position Summary: As the Restaurant Operations Manager , you will oversee the end-to-end restaurant and bar operations, manage service quality, maintain brand SOPs, and ensure all departments function smoothly. You will be the key point of contact for internal coordination, guest satisfaction, and operational profitability. Key Responsibilities:Operational Oversight: Manage day-to-day operations across FOH (Service, Bar, Reservations) and BOH (Kitchen, Stewarding). Lead shift briefings and ensure shift handovers are documented properly. Ensure smooth coordination between kitchen, service, and bar teams. Supervise night operations, especially during weekends and live events. Team Management: Lead and manage a team of 60–80 staff, including captains, stewards, bartenders, and hostesses. Monitor performance, attendance, grooming, and discipline. Drive daily briefings, training programs, and service upgrades. Guest Experience & Service: Maintain high standards of service, ambience, and hygiene. Personally handle VIP guests, complaints, and special events. Conduct floor walk-throughs to ensure tables, bar counters, and guest zones are managed proactively. Inventory, Compliance & Finance: Manage stock controls, wastage monitoring, and vendor coordination. Ensure compliance with licenses, FSSAI, excise, fire safety, and local regulations. Maintain daily sales reports, expense trackers, and coordinate with the Accounts team for vendor payments and monthly P&L. Event & Coordination: Collaborate with events and marketing teams for theme nights, DJ line-ups, and private bookings. Maintain coordination with kitchen and bar teams for set menus and special service protocols. KPIs (Key Performance Indicators): Guest Satisfaction Score (Google / Zomato / TripAdvisor ratings): Minimum 4.5+ average Table Turnover Efficiency: 3x per table per evening during peak season Staff Attendance & Retention: Maintain below 5% monthly absenteeism Cost Control Metrics: Maintain F&B cost within target (e.g., Food – 28–32%, Liquor – 18–22%) Complaint Resolution Time: 90% complaints addressed within 10 minutes Inventory Variance: Keep shrinkage below 2% Revenue Targets: Achieve monthly targets as set by Management based on seasonality Qualifications & Requirements: Graduate/Diploma in Hotel Management or equivalent. Minimum 5–7 years of experience in high-volume F&B or nightlife venues. Previous experience in Goa’s hospitality/nightlife circuit is preferred. Strong knowledge of service SOPs, POS systems (e.g., PetPooja, POSist), and inventory tools. Proficiency in English; Hindi and Konkani are advantageous. Should be flexible with late-night shifts, weekends, and holidays. Job Types: Full-time, Permanent Pay: ₹60,000.00 - ₹70,000.00 per month Benefits: Food provided Health insurance Provident Fund Work Location: In person

Involving in EMI/EMC tests external facility PCB Card Assembled for SMD & LEADED type components Cable Harness Wiring preparation as per Document. PTFE Wires, Potting & Conformal Coating Activities. Hi-Reliable soldering, SMDS components & De-Soldering. Crimping of wires, RF Semi-rigid cables work, Chip Components IC’s Soldering. Circular and D Type, Nicomatic, Airborne Connectors Crimping. Soldering Micro switches, Solenoid valves, wire Pull Testing. Electricals cable harness inspection like continuity, Retention and insulation. Inspection of Integrated cable harness in the section according to the routing diagram. Assembling, evaluating, testing, and maintaining electrical or electronic wiring, equipment, appliances, and apparatus. Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus. Constructing and fabricating parts, using hand tools and specifications. Reading and interpreting electrical and electronic circuit blueprints, diagrams, and schematics. Advising management on continued use of unsuitable equipment, appliances, and apparatus. Job Type: Full-time Pay: From ₹30,000.00 per month Benefits: Provident Fund Work Location: In person Expected Start Date: 18/08/2025

We are seeking an experienced and passionate Laptop Chip Level and Hardware Faculty to join our technical education team. The ideal candidate will have in-depth knowledge of laptop motherboard repair, chip-level diagnostics, and general hardware troubleshooting, with a strong interest in teaching and mentoring students. Key Responsibilities: Teach chip-level and hardware repair for laptops and desktops, including motherboard diagnosis, BGA rework, BIOS programming, and power section troubleshooting. Develop and deliver engaging theoretical and practical lessons. Create course materials, presentations, assignments, and assessments. Guide students through hands-on training sessions with live cases. Required Skills and Qualifications: Diploma/Degree in Electronics, Computer Hardware, or a related field. Minimum 2–5 years of practical experience in chip-level servicing and laptop hardware. Strong knowledge of laptop architecture, SMD soldering/disordering, multimeter/oscilloscope usage, and circuit-level fault finding. Prior experience in teaching or training is preferred but not mandatory. Good communication and interpersonal skills. Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Language: English (Preferred) Work Location: In person

Job Summary: We are looking for a proactive and detail-orientated Testing Engineer (Embedded Product) to join our electronics product development team. The ideal candidate will have hands-on experience in hardware testing, debugging, and documentation and be capable of collaborating across cross-functional teams to ensure quality and reliability. Key Responsibilities: Develop and execute hardware test plans for prototypes and production units Perform testing and diagnostics using tools such as multimeters, oscilloscopes, and power supplies Collaborate with design and production teams to identify and troubleshoot hardware issues Create detailed test documentation: reports, test cases, summaries, and failure analyses Contribute to production and operator documentation, including SOPs and work instructions Recommend design or process improvements based on test findings Maintain records of testing outcomes and support quality control initiatives Stay updated on electronics testing standards and tools Requirements: Diploma or Degree in Electronics Engineering or related discipline 1–3 years of experience in hardware testing, validation, or production support Strong understanding of circuit-level testing and test equipment usage Basic debugging and fault analysis skills Familiarity with documentation practices for test and production processes Working knowledge of MS Office and basic documentation tools Excellent time management, teamwork, and problem-solving skills Good to Have: Experience with in-circuit testing (ICT), functional testing, or automated test setups Exposure to IoT or embedded hardware systems Basic understanding of production lines and quality control systems Multilingual skills (English, Hindi, Malayalam, Tamil) Job Types: Full-time, Permanent Benefits: Health insurance Application Question(s): How many years of experience do you have in embedded product testing? Language: English (Preferred) Work Location: In person Speak with the employer +91 8589874131

Job Summary: We are seeking a skilled Electrical Engineer with 3 to 5 years experience to design, develop, and maintain electrical systems and components to required specifications. The ideal candidate should ensure projects are completed safely, on time, and within budget. Job Description: Design and develop electrical systems for commercial and residential buildings. Prepare detailed electrical drawings using AutoCAD, Revit, or similar tools. Perform load calculations, cable sizing, panel schedules, and circuit layouts. Ensure designs comply with local codes, safety standards, and energy efficiency guidelines. Collaborate with architects, mechanical engineers, and project managers on site coordination. Conduct site inspections and resolve electrical issues during construction. Prepare BOQs, technical specifications, and reports for tenders and procurement. Key Responsibilities: Design and develop electrical systems and components. Conduct feasibility studies and cost analysis. Develop and test prototypes. Prepare technical drawings and specifications. Ensure compliance with electrical safety standards and codes. Troubleshoot and resolve electrical issues. Collaborate with mechanical engineers and other departments. Supervise and guide technicians during installation and maintenance. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹45,000.00 per month Education: Bachelor's (Preferred) Work Location: In person

Are you a highly motivated, creative individual and passionate about working with electrical components or equipment? Would you like to be a part of our team? Join our team! Baker Hughes is the leading energy technology company, who delivers across the energy value chain through our market-leading business segments. Built on a century of experience and conducting business in over 120 countries. Our innovative technologies and services are taking energy forward! Making it safer, cleaner and more efficient for people and the planet. Partner with the best The Engineer provides direction and assistance to work group in order to meet assigned objectives. In this role he/she will execute, with guidance from senior engineering resources, the analysis, design, test, or integration required to define and support for assigned instruments such as smart positioners, electronic assemblies or systems that meet business standards and product requirements. As an Electronic Hardware Design Engineer, you will be responsible for: Maintain sustenance of global product definition required to define and support control valve instruments and accessories, assemblies or systems that meet corporate engineering standards and New Product Introduction program requirements. To handle the electronic element/component obsolescence and work with software team. Prepare and present technical data in design reviews to chief/principal engineers and global engineering approval committees. Collaborate with external contract manufacturers to resolve technical throughput concerns. Document the work in PLM, eDRB and other corporate document repositories Participate on teams assigned to address specific organizational initiatives such as cost out, design automation using Microsoft VBA/scripts. Work on CAD packages and ERP such as Solidworks, SAP. Prepare invention disclosures to protect the technology that provides a competitive advantage to the business Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures. Fuel your passion! To be successful in this role you will: Have a bachelor’s degree in Electronics/Instrumentation Engineering from an accredited college or university with 2-5 years of experience in Electronic Hardware Design Engineer field. Have a knowledge in Electronic hardware design, Analog circuit design, PCB layout, Field Instrumentation, HART protocol etc. Good to have an experience in automation using LabVIEW/PLC coding Have a knowledge of mechanical/hydraulic/electrical control systems Work in a way that works for you We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. Working flexible hours - flexing the times when you work in the day to help you fit everything in and work when you are the most productive Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect. Contemporary work-life balance policies and wellbeing activities Comprehensive private medical care options Safety net of life insurance and disability programs Tailored financial programs Additional elected or voluntary benefits About Us: We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner and more efficient for people and the planet. Join Us: Are you seeking an opportunity to make a real difference in a company that values innovation and progress? Join us and become part of a team of people who will challenge and inspire you! Let’s come together and take energy forward. Baker Hughes Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. R152303

Gurgaon 1 5 to 8 years Full Time We are looking for a highly skilled DevOps Engineer to support and optimize the deployment, scalability, and reliability of our cloud-based microservices architecture. The ideal candidate will have hands-on experience with containerized deployments, Kubernetes, monitoring tools, JVM tuning, and performance optimization. Responsibilities / Scope of Work: Docker Deployment & Optimization Create Dockerfiles and multi-stage builds for Java, Node, and Angular apps. Set up Docker Compose for local development. Optimize image size and performance. System Design for Microservices Design infrastructure architecture for microservices-based applications. Define service communication patterns (sync/async, service mesh, etc.). Ensure fault-tolerance and high availability. Kubernetes (K8s) Deployment Configure deployments, StatefulSets, Services, and Ingress. Implement horizontal/vertical pod autoscaling . Set up Helm charts for reusable deployment patterns. Load Balancing and API Gateway Configure NGINX and Spring Cloud Gateway for internal and external traffic routing. Implement rate limiting, circuit breakers, and routing policies. NGINX Web Server Configuration Set up web servers for micro frontends and static content. Configure SSL, gzip compression, and custom headers. Auto-scaling and Resource Optimization Configure auto-scaling policies based on CPU, memory , or custom metrics. Analyze and tune resource limits/requests for performance and cost. Monitoring & Alerting Integrate Prometheus and Grafana to monitor: JVM heap usage GC activity CPU, memory, and network metrics Application-level metrics (via Micrometre or custom exporters) Set up alerts (e.g., Slack, Email, and Pager Duty). JVM Performance Tuning Analyze GC logs and memory usage in containerized environments. Optimize JVM options (-Xms, -Xmx, GC, etc.). Integrate VisualVM or JFR in CI/CD diagnostics.

Job Description: Safety Officer Position Overview: The Safety Officer is responsible for implementing safety policies, conducting risk assessments, and providing training to employees to maintain a safe work environment. Key Responsibilities: 1. Safety Compliance and Monitoring Conduct regular Safety Audits to ensure adherence to safety standards and statutory regulations. Ensure implementation of all EHS (Environment, Health & Safety) protocols within the warehouse. Maintain and regularly update the EHS Board with relevant safety statistics, alerts, and updates. 2. Reporting and Documentation Prepare and present the Monthly ASM (Audit and Safety Meeting) Report to clients and management. Compile and submit Thermography Reports for electrical safety assessments. Generate and maintain RCCB (Residual Current Circuit Breaker) Test Reports to verify equipment safety. Create comprehensive Monthly Safety Presentations for review meetings. 3. Training and Awareness Conduct Safety Induction Programs for all new joiners to familiarize them with safety protocols. Provide regular Safety Training Sessions for employees across departments. Participate in and lead Morning DWM (Daily Work Management) meetings to address daily safety concerns. 4. Incident Preparedness and Risk Management Plan and execute Mock Drills to assess emergency response readiness. Proactively resolve customer queries related to safety concerns. 5. Continuous Improvement Promote and implement Kaizen initiatives for ongoing improvement in safety practices. Work closely with the Maintenance Team to address and rectify safety hazards. 6. Coordination and Communication Act as a liaison between internal teams and external stakeholders regarding safety matters. Ensure effective communication of safety standards and updates across all levels. Job Type: Full-time Pay: ₹35,000.00 - ₹38,000.00 per month Benefits: Food provided Health insurance Provident Fund Work Location: In person

The opportunity Contribute significantly to successful project results in technology and/or product development by identifying, proposing and implementing innovative solutions. Use unique technical knowledge to oversee development tasks. How You’ll Make An Impact Demonstrate advanced expertise in technologies, tools, and methodologies within your specialization by addressing complex industrial challenges and staying updated through external technology reviews. Offer technical leadership in transformer insulation design for R&D projects, supporting innovation and providing guidance throughout various project phases, including design clarification, simulation, and troubleshooting. Develop new ideas and contribute to multiple technology initiatives by leveraging your knowledge of dielectrics and insulation. Conduct feasibility studies, propose technical solutions, design innovative products, and simulate their performance. Communicate insights through detailed reports, specifications, and participation in educational programs, ensuring effective knowledge transfer. Assess and enhance production processes by proactively identifying improvement areas and provide expert support to factories. Collaborate globally with research scientists, technology centers, technology managers, and engineers across different facilities, strengthening both internal and external partnerships, including with customers and academic institutions. Lead the advancement of transformer insulation design tools, from creating technical requirements to supporting software development and testing solution quality. Formulate clear, actionable recommendations for the business, and ensure that findings are shared and documented effectively. Participate in product and technology development projects, ensuring they are delivered on time and within budget. Take on key project roles, including sub-project leadership, to align activities with R&D objectives. Engage actively in engineering networks to deepen your expertise and increase your professional visibility. Recognize the significance of intellectual property to the organization by contributing to IP discussions, preparing clearance reports, and identifying potential risks in R&D activities. Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Your Background MS or PhD Engineer in High Voltage Engineering or Power System engineering. Minimum 10 years of proven experience on using simulation tools (Ansys, Elecnet, COMSOL etc..) and preferably have experience in designing and FEM based simulations. Strong understanding of electrical engineering principles, including electromagnetics, dielectrics and circuit analysis Expertise in characterizing and modeling the dielectric properties of various materials, including permittivity, permeability, and loss tangent. Deep understanding of Power Transformer insulation design, insulation materials and testing techniques. Familiarity with international standards like IEEE, ANSI, and IEC, related to transformers and their components Knowledge of CAD modelling software (CREO) Solid understanding of the standard body of knowledge in the relevant technical field and solid technical proficiency. Willingness to travel to factories when needed Strong verbal and written communication skills in English. Hitachi Energy is a global technology leader in electrification, powering a sustainable energy future through innovative power grid technologies with digital at the core. Over three billion people depend on our technologies to power their daily lives. With over a century in pioneering mission-critical technologies like high-voltage, transformers, automation, and power electronics, we are addressing the most urgent energy challenge of our time – balancing soaring electricity demand, while decarbonizing the power system. Headquartered in Switzerland, we employ over 50,000 people in 60 countries and generate revenues of around $16 billion USD. We welcome you to apply today.

The opportunity Electrical designers focus on transformer component designs Bushing & Tap changer in coordination with global Hitachi Energy factory based on the marketing & purchase order requirement. Electrical Design of transformer component designs will be responsible for the Preparation of Customer documents, Manufacturing drawings, Bills of materials, etc. How You’ll Make An Impact The successful candidate will be the part of an International Design and Engineering Team heavily specialized in transformer components design covering a US factory. Responsible for the design and development of power transformer components. Responsible for the Preparation of Customer documents, Manufacturing drawings, Bills of materials, etc. Coordinating his/her design activities within a worldwide factory network. Participation in internal design concept reviews. Influence specification at the tender and pre-tender stage, through conceptual discussions. Design as per Market and Sales Strategy to meet the market needs. Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Your Background Bachelor’s degree in electrical engineering. 4 – 8 years’ experience working in Electrical design for Bushings or Tap changers or related to power systems. Experience in Power Transformer engineering is an additional advantage. Experience with IEEE is an additional advantage. Understanding of Bushing or Tap Changer Design, Thermal and Dielectrics performances, short circuit forces, and other mechanical & electrical properties. Experience in FEA or software development would be advantageous. Experience with Microsoft Office and tools. Experience in Microsoft office and tools. Ability to speak with and work together with the technical teams in different parts of the world. Hitachi Energy is a global technology leader in electrification, powering a sustainable energy future through innovative power grid technologies with digital at the core. Over three billion people depend on our technologies to power their daily lives. With over a century in pioneering mission-critical technologies like high-voltage, transformers, automation, and power electronics, we are addressing the most urgent energy challenge of our time – balancing soaring electricity demand, while decarbonizing the power system. Headquartered in Switzerland, we employ over 50,000 people in 60 countries and generate revenues of around $16 billion USD. We welcome you to apply today.

Job Opening: Mechanical Assembly Fitter Location: Badkhal Lake Chowk, Faridabad (HR)-121001 Job Type: Full-time Salary Range: ₹15,000 – ₹30,000 (Based on skills and experience) Experience Required: Minimum 2–3 years Qualification: ITI or Diploma in Mechanical or relevant field Job Responsibilities: Read and interpret mechanical drawings and machine assembly diagrams. Understand tolerances and fits according to ISO standards. Knowledge of various engineering materials. Read and interpret pneumatic and hydraulic circuit diagrams. Perform quality inspection of machine parts as per drawings and defined tolerances. Carry out machine assembly as per technical drawings and standards. Install and commission machines at customer locations according to their specifications. Obtain MOM (Minutes of Meeting) sign-off post successful project completion. Lead small teams during projects, ensuring coordination and productivity. Use precision quality tools such as: Digital Vernier Caliper, Digital Micrometer, Height Gauge, Dial Test Indicator, Puppy Dial, Slip Gauge, Angle Protractor. Modify parts using tool room equipment like M1TR, Surface Grinder, etc. Ensure project completion within deadlines. Maintain effective communication with internal team members and customers. Requirement: Strong mechanical aptitude. Attention to detail with quality and precision. Good communication and teamwork skills. Must have worked with SPM machines in past Must have worked on AutoCAD and SolidWork software. Job Type: Full-time Pay: ₹15,000.00 - ₹30,000.00 per month Benefits: Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

Company Description HUSL The Fitness Club is equipped with the most advanced performance equipment and powered by TECHNOGYM. Our facilities feature technology to track your progress and offer a next-generation group studio experience. We are dedicated to providing innovative and superior fitness experiences to our members. Role Description This is a full-time on-site role for a Gym Trainer located in Panchkula. The Gym Trainer will be responsible for providing personal training sessions, fitness instruction, and circuit training. The role involves creating customized training programs, offering nutritional guidance, and conducting sports coaching. The Gym Trainer will be expected to motivate and assist clients in reaching their fitness goals. Qualifications Skills in Nutrition and providing dietary guidance Experience in Personal Training and creating customized workout plans Proficient in Fitness Instruction and conducting Circuit Training Sports Coaching skills Strong communication and interpersonal skills Ability to work in a team and independently Relevant certifications in fitness or personal training are preferred Prior experience in a similar role is a plus

We are seeking an experienced Electrical Engineer with a strong technical background in electrification work for government buildings. The ideal candidate will be responsible for overseeing internal and external electrical installations, as well as coordinating with contractors, design teams, and subcontractors. Key Responsibilities Installing, maintaining, and repairing electrical control, wiring, and lighting systems. Reading technical diagrams and blueprints. Performing general electrical maintenance. Inspecting transformers, circuit breakers, and other electrical components. Troubleshooting electrical issues using appropriate testing devices. Following National Electrical Code state and local building regulations. Repairing and replacing equipment, electrical wiring, and fixtures. Maintaining good knowledge of heating and air conditioning systems as well as various testing equipment. Qualification ITI or Diploma with 2 to 4 years experience in construction field Job Type: Full-time Pay: ₹12,000.00 - ₹15,000.00 per month Benefits: Food provided Health insurance Provident Fund Work Location: Remote

Job Title: Electronics and Radio Design Engineer Location: Noida Job Summary: We are looking for a motivated Electronics and Radio Design Engineer to join our innovative team. The intern will support the design, development, and testing of electronic circuits, radio frequency (RF) systems, especially software-defined radios, and firmware for cutting-edge products developed for the Indian Army. This role offers hands-on experience in RF circuit design, antenna systems, microcontroller programming, and embedded systems, providing a unique opportunity to contribute to mission-critical technologies. Key Responsibilities: Collaborate in prototyping and debugging hardware to ensure functionality, signal integrity, and performance in radio and embedded systems. Development and testing of our own Radio systems/upgrades to existing radio modules Assist in creating and maintaining technical documentation, including schematics, RF performance reports, test results, and user manuals. Assist in the design and development of RF circuits, antenna systems, and PCBs Conduct research and evaluation of electronic components, RF modules, sensors, and communication modules for project requirements. Perform testing and validation of RF circuits, electronic systems, and PCBs using tools such as network analyzers, multimeters, oscilloscopes, and signal generators. Support the development and testing of communication protocols, including UART, SPI, I2C, CAN, and wireless protocols like LoRa, Zigbee, or Bluetooth. Stay updated with emerging trends in RF design, wireless communication, and embedded systems technologies. Qualifications: Degree in Electronics Engineering, Electrical Engineering, Telecommunications, or a related field. Good working Experience at least 1.5+yrs experience of electronic circuit design, RF principles and schematic capture. Experience with working as well as design of SDR Experience with RF and microwave components, such as amplifiers, filters, mixers, and oscillators. Experience with RF link budget, RF PCB Design, Antenna Design, selection of RF components Hands-on in RF lab equipments (e.g., spectrum analyzers, network analyzers) and debugging tools (e.g., oscilloscopes, multimeters, logic analyzers) Experience with EMI/EMC analysis is an advantage. Familiarity with microcontroller programming (e.g., Arduino, STM32, ESP32). Strong analytical and problem-solving skills with an interest in RF and wireless communication systems. Good communication and teamwork abilities Job Type: Full-time Pay: Up to ₹600,000.00 per year Benefits: Health insurance Leave encashment Paid sick time Provident Fund Work Location: In person

Mott MacDonald is a global engineering, management, and development consultancy committed to delivering impactful work that shapes the future. We are a team of over 20,000 experts working across the world in more than 50 countries. We are proud to be part of an ever-changing global industry, delivering transformative work that’s defining our future. It’s our people who power that performance. As an employee-owned business, we invest in creating a space for everyone to feel safe and valued and empowered with the right tools and support. Whether you want to pursue excellence in your specialism or broaden your experience with flexible roles across our business, you’ll be connected to a community of global experts championing you to be your best. Join us and shape your story with Mott MacDonald, where everyone has the opportunity to be brilliant . Main Purpose of the Job: To undertake Instrumentation Related Engineering activities in an engineering consultancy organization. Key Responsibilities/Duties Should be able to plan work and meet deadlines and manage priorities. Should check work assigned to lower-level Designers or CAD Technicians/Drafters for technical quality, accuracy, and compliance of discipline standards. Able to perform inter disciplines co-ordination, if any. Should provide design sketches/technical guidance utilizing theoretical and practical design knowledge for drawing/model preparation by lower-level Designers or CAD Technicians. Able to read circuit diagrams for Elect. MCC and Valves operations, etc. Familiar for selection of Instrument type based on service & material. Preparation of Data Sheets for various Field Instruments. Preparation of schematics, wiring diagram, field wiring diagram, installation drawing, cable schedule, junction box drawing, as-built drawing, etc Estimate bill of material, MTO, free issue materials, erection bulks such as tubes, fittings, cables, cable trays, conduits, junction box etc. Hands on Experience Cable lengths and sizes calculation, Cable tray sizing design. Preparation of cable tray layouts. Software Skills Expertise with Ms office & Ms Excel towards various formula’s, pivot table, etc. Familiar with NAVIS / Revit or any 3D environment will be an added advantage. Familiar with Instru-cal shall be an added advantage. Essential Candidate Requirements: Graduate Instrumentation Engineer. BE (Full Time) with industrial experience in Design Consultancy / EPCM for Chemical, Fertilizer, Pharmaceutical sector. Flexible working At Mott MacDonald, we support our staff to create work-life balance which works for them and welcome candidates looking for career flexibility. We are open to discussing flexible working at interview stage. Our Benefits Package Is Designed To Enhance Your Experience Agile working Critical illness and compassionate leave Paternity Leave Group term life insurance, and Group medical insurance coverage Career mobility options Short and Long-term global employment opportunities Global collaboration and knowledge sharing Location(s): Mumbai, MH, IN Contract Type: Permanent Work Pattern: Full Time Market: Energy Discipline: Energy Job Ref: 9782 Recruiter Contact: Shweta Sharma

Key Responsibilities · Candidates preferably from the electronics having minimum experience of 2-3 yrs. · Design and develop PCB layouts using Altium Software based on circuit schematics and engineering input. · Work with engineers to optimize board layout for signal integrity, thermal performance, and manufacturability. · Ensure PCB designs comply with industry standards, internal guidelines. · Experience with multi-layer PCB designs. · Generate and maintain all design documentation including Gerber files, BOMs, fabrication and assembly drawings. · Collaborate with mechanical, firmware, and manufacturing teams throughout the product development lifecycle. · Support prototype and production builds, including working with PCB fabrication and assembly vendors. Implement design changes and resolve any issues during prototyping and production stages. Stay current with the latest PCB design trends and technologies. · Ensure proper component placement for thermal and electrical performance. Required Qualifications · Diploma or Bachelor’s degree in Electronics Engineering, Electrical Engineering, or a related field. · 3+ years of experience in PCB design. · Proficiency with PCB design tools such as Altium, OrCAD, Eagle, KiCad, or similar. · Strong understanding of PCB fabrication and assembly processes. · Knowledge of EMC/EMI design considerations and signal integrity practices. · Familiarity with high-speed, analog, and mixed-signal design. · Ability to read and interpret schematics, datasheets, and technical documentation. · Strong attention to detail, problem-solving skills, and teamwork capabilities. Job Type: Full-time Pay: ₹40,000.00 - ₹45,000.00 per month Benefits: Paid sick time Provident Fund Application Question(s): How much experience do you have in PCB Designing? How many layers of PCB have you designed? Work Location: In person

· Design and develop power electronics hardware including power supplies, MPPT controllers, and battery charging systems. · Create schematics and PCB layouts (up to 4 layers) using tools such as Altium , OrCAD, Eagle, etc. · Candidate must have strong knowledge in electronic component selection. · Deep understanding of power converter topologies : buck, boost, fly back, AC-DC converter, DC-DC converter, etc. · Hands-on experience with on-grid inverters including design, testing, and troubleshooting of inverter hardware. · Handle new product development independently including hardware design and prototyping. · Perform testing and validation of new designs to ensure performance and reliability. · Debug and troubleshoot hardware and PCB-level issues during development and testing. · Conduct magnetic component calculations (transformers, inductors, etc.) as part of the power circuit design. · Use lab equipment such as CRO, LCR meter , power analyzers, etc., for measurements and validation. · Maintain design documentation and BOMs. Required Qualifications · Bachelor’s degree or diploma in Electronics Engineering. · Minimum 3 years of experience in power electronics hardware. · Proficiency in schematic capture and PCB layout tools. · Good knowledge of digital and analog circuit design . · Familiarity with power components : MOSFETs, IGBTs, gate drivers, transformers, etc. · Experience in working with DC-DC, AC-DC converters , battery chargers, or solar MPPT systems. · Hands-on experience with test and measurement instruments . · Strong debugging and analytical skills. Job Type: Full-time Pay: ₹60,000.00 - ₹65,000.00 per month Benefits: Paid sick time Provident Fund Work Location: In person

Job Title: Senior Designer – M&E Based at our office in Ahmedabad, India – Full-Time, Permanent About the Company Crayside Consulting India is the Indian arm of the UK-headquartered Crayside Consulting Group, a specialist in engineering design, high voltage power systems, earthing, lightning protection, and associated project consultancy. The India office supports major infrastructure projects across the UK and Europe, working closely with UK-based teams. Based in Ahmedabad, Crayside India is a strategic engineering and delivery hub, contributing to the group’s long-term global delivery model with a focus on design innovation and technical excellence. Website: https://craysideconsulting.in Job Overview: We are seeking an experienced Senior Designer to join our MEP team. You will be responsible for preparing accurate electrical CAD layouts and BIM-ready documentation for UK and European projects, working closely with engineers across India and the UK. Key Responsibilities CAD Draft and Revit model layouts for lighting, cable trays, raw power, earthing, LPS, and ELV (IT/security systems) with minimal design input. Prepare schematic wiring diagrams and circuit schedules Work within AutoCAD and Revit to develop and update 2D/3D design deliverables Maintain drawing and model standards aligned with UK project requirements Coordinate with engineers and other disciplines for clash detection and design consistency Support development of standard templates and libraries for CAD/Revit MEP Required Skills & Qualifications ITI or Diploma/BE in Electrical Engineering 5–8 years of drafting experience in MEP design consulting or architectural firms Proficiency in AutoCAD (latest version); working knowledge of Revit is essential Strong grasp of electrical systems fundamentals and UK/IS standards Excellent communication and coordination skills for working in multidisciplinary teams Electrical design software knowledge like Relux, Dialux EVO, Amtech, EOM Preferred: Candidates from Gujarat or willing to relocate Salary & Benefits - We offer a competitive salary and benefits package, along with the opportunity to work with a talented and passionate team in a rapidly growing subsidary. If you have a passion for innovation and a drive to succeed, we would love to hear from you. If you are a motivated, detail-oriented individual with a passion for design engineering and project coordination, we encourage you to apply for this exciting opportunity. Job Type: Full-time Benefits: Provident Fund Ability to commute/relocate: Sola, Ahmedabad, Gujarat: Reliably commute or planning to relocate before starting work (Preferred) Application Question(s): What is your notice period from your current job? What is your Current and Expected Salary? Experience: Electrical engineering: 4 years (Required) Language: English (Required) Location: Sola, Ahmedabad, Gujarat (Preferred) Work Location: In person

Should be Passionate about teaching. Good Communication skill is a must. Basic knowledge of IT Skills is a must. Adopt the philosophy Learn -Unlearn & Relearn. Ability to create a healthy nurturing environment Block Coding Application Making Circuit Making Knowledge of Microcontroller – Arduino etc. Knowledge of 3D Printer Knowledge of STEM Education Job Type: Full-time Pay: Up to ₹27,000.00 per month Work Location: In person

JOB DESCRIPTION: 1. Milkoscreen Instrument - Service 2. Trail & Demo 3. Installation & Training to customers 4. Exhibition Participation 5. Preventive maintenance and Breakdown 6. Target Achievement as per KRA/KPI 7. Travel to customer sites as required for on-site troubleshooting, maintenance, and support Key Skills required : 1. Electronics Tool handling 2. Basic Electronics 3. Soldering & Component Handling 4. Troubleshooting & Fault Finding 5. Circuit tracing Soft skill also required: MS-Excel, MS-Office, Computer Proficiency, etc. Non-Technical Skills required : 1. Good Communication Skill 2. Customer Handling 3. Ready for extensive travelling (In case required-Across India) 4.Report preparation and data entry for ongoing trials and service calls. 5.Reminder for Service contract expiry and renewal 6.Deliver a high level of Customer Satisfaction as well as achieve/exceed the financial target through promotion of AMC & Sale of spares. Experience: 0-7 yrs Education Required: Diploma/B. Tech/BE in (Electronics /Instrumentation/ Electrical) Location: Palanpur, Gujarat Job Type: Full-time Job Types: Full-time, Permanent Pay: ₹16,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Health insurance Internet reimbursement Leave encashment Provident Fund Education: Diploma (Preferred) Willingness to travel: 100% (Preferred) Work Location: Remote

Candidate should be an ITI ( Electrical) with 03 to 06 years working experience Ready to shift to Jaipur Candidate should have a sound knowledge of below mentioed JD Installing, maintaining, and repairing electrical control, wiring, and lighting systems. Reading technical diagrams and blueprints. Performing general electrical maintenance. Inspecting transformers, circuit breakers, and other electrical components. Troubleshooting electrical issues using appropriate testing devices. Repairing and replacing equipment, electrical wiring, and fixtures. Following National Electrical Code state and local building regulations. Performing circuit breaker corrective maintenance. Maintaining good knowledge of heating and air conditioning systems as well as various testing equipment. Salary Range will be 25000 to 28000 CTC per Month If any interested can drop their CV on deepak.singh@rsitl.in or Whatsapp on 9571711978 Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹28,000.00 per month Work Location: In person

Research collators need to have at least five years of proven competitive quizzing experience and should have won a fair number of quizzes in the college circuit and at the national quizzing scene. The position would be on “work from home” basis and can be taken as a part time job. Remuneration would be at par with industry standards. Mail us your CV and if its impressive enough we, will revert.

Vodafone Idea Limited is an Aditya Birla Group and Vodafone Group partnership. It is India’s leading telecom service provider. The Company provides pan India Voice and Data services across 2G, 3G and 4G platform. With the large spectrum portfolio to support the growing demand for data and voice, the company is committed to deliver delightful customer experiences and contribute towards creating a truly ‘Digital India’ by enabling millions of citizens to connect and build a better tomorrow. The Company is developing infrastructure to introduce newer and smarter technologies, making both retail and enterprise customers future ready with innovative offerings, conveniently accessible through an ecosystem of digital channels as well as extensive on-ground presence. The Company is listed on National Stock Exchange (NSE) and Bombay Stock Exchange (BSE) in India. We're proud to be an equal opportunity employer. At VIL, we know that diversity makes us stronger. We are committed to a collaborative, inclusive environment that encourages authenticity and fosters a sense of belonging. We strive for everyone to feel valued, connected and empowered to reach their potential and contribute their best. VIL's goal is to build and maintain a workforce that is diverse in experience and background but uniform in reflecting our Values of Passion, Boldness, Trust, Speed and Digital. Consequently, our recruiting efforts are directed towards attracting and retaining best and brightest talents. Our endeavour is to be First Choice for prospective employees. VIL ensures equal employment opportunity without discrimination or harassment based on race, colour, religion, creed, age, sex, sex stereotype, gender, gender identity or expression, sexual orientation, national origin, citizenship, disability, marital and civil partnership/union status, pregnancy, veteran or military service status, genetic information, or any other characteristic protected by law. VIL is an equal opportunity employer committed to diversifying its workforce. Role TM – Service Operations Job Level/ Designation M1 Function / Department Technology Location Hyderabad Job Purpose Circle TES Service operation is responsible for Customer Life cycle management. This role will be accountable for enterprise customer service operation along with agreed KPI – MTTR (240Min.), Fault rate (<=10 %) & Circuit uptime (99.5%) along with life cycle management. Schedule regular review meetings with MS partner, 3rd party vendor, NOC & Business team for service improvement plan & ensure customer deliverables as per agreement. Key Result Areas/Accountabilities Accountable for end to end Enterprise customer experience management at circle. Acts as a SPOC to manage escalation for all Service Operations and maintain committed SLA’s of uptime for enterprise customers. Lead a team that delivers and maintains fixed line services as per committed TAT and SLA’s for Enterprise customers. Undertaking service improvement plans to .provide customer circuit uptime improvement in a timely manner Governance of MS partner & Off-net service providers Engagement with cross functional team as well as NOC team Maintenance, Tracking and release of AMC POs for 3rd party and circle vendors Different type of network consolidation project execution as per given timeline HSW & PTW compliance Core Competencies, Knowledge, Experience Different type of UBR product knowledge & hands on experience ECI & Huawei NMS knowledge is must Different type of IP device hands on experience like – CISCO, Nokia & Huawei (CCNA/CCNP) Core Competencies, Knowledge, Experience B.Tech in ECE/EEE 2 - 5 years of Telecom domain experience in field projects & operations. Experience of working in a Telecom service delivery / Operations function Experience with Data Networking platforms and Enterprise products & services. Vodafone Idea Limited (formerly Idea Cellular Limited) An Aditya Birla Group & Vodafone partnership