11418 Qc Jobs - Page 49

Complete Production Responsibility Position Overview We are seeking a dynamic and experienced Assistant Manager - Production at the level of Shift Incharge with complete responsibility for production operations. This critical role requires hands-on leadership in pharmaceutical manufacturing, ensuring optimal production efficiency, quality compliance, and team performance. The successful candidate will be responsible for end-to-end production management, from raw material utilization to finished product dispatch. Location: India Employment Type: Full-time, Permanent Reporting To: Production Manager Team Size: 15-25 people production team Key Responsibilities Production Operations Management Take full ownership of all production activities Ensure seamless production flow from raw material receipt to finished goods Monitor and optimize production schedules to meet daily/weekly targets Coordinate with all shifts for smooth handover and continuity Manage production line changeovers and setup activities efficiently Manufacturing Excellence Oversee pharmaceutical manufacturing processes including dispensing, mixing, granulation, compression, coating, and packaging Ensure optimal equipment utilization and minimize downtime Monitor critical process parameters and maintain process control Implement continuous improvement initiatives to enhance productivity Manage production scheduling and resource allocation effectively Batch Management Review and approve batch manufacturing records (BMR) Ensure accurate batch documentation and record maintenance Monitor in-process controls and sampling procedures Coordinate with QC for timely release of batches Manage batch reconciliation and yield optimization Quality Assurance & Compliance cGMP Compliance Ensure strict adherence to current Good Manufacturing Practices (cGMP) Maintain cleanroom protocols and environmental monitoring Implement and monitor Standard Operating Procedures (SOPs) Conduct regular compliance audits and corrective actions Ensure proper documentation and record-keeping practices Quality Management Monitor product quality parameters and specifications Coordinate with Quality Control and Quality Assurance departments Implement corrective and preventive actions (CAPA) as required Ensure proper handling and storage of raw materials and finished products Maintain traceability and batch genealogy records Regulatory Compliance Ensure compliance with Drug Controller General of India (DCGI) regulations Maintain EU-GMP, WHO-GMP, and other international standards as applicable Support regulatory inspections and audits Implement regulatory updates and changes in manufacturing practices Team Leadership & Management People Management Lead and motivate a team of production operators, technicians, and support staff Conduct shift briefings and communicate daily objectives and priorities Provide on-the-job training and skill development for team members Manage attendance, performance, and disciplinary actions as required Foster a positive work environment promoting teamwork and collaboration Performance Management Set clear performance expectations and KPIs for team members Conduct regular performance reviews and provide constructive feedback Recognize and reward outstanding performance Address performance issues and implement improvement plans Support career development and succession planning Safety & Environment Management Occupational Health & Safety Ensure compliance with all safety protocols and procedures Conduct safety briefings and promote safety awareness Investigate accidents and incidents, implement corrective measures Maintain safety equipment and emergency response procedures Achieve zero-accident targets and promote safety culture Environmental Compliance Monitor environmental parameters and waste management Ensure proper disposal of pharmaceutical waste Implement environmental sustainability initiatives Maintain compliance with pollution control board requirements Monitor water and energy consumption optimization Equipment & Maintenance Management Equipment Operations Ensure proper operation and maintenance of manufacturing equipment Coordinate with maintenance team for preventive and corrective maintenance Monitor equipment performance and identify improvement opportunities Maintain equipment logs and performance records Maintenance Coordination Schedule and coordinate maintenance activities with minimal production impact Ensure availability of critical spare parts and consumables Monitor equipment efficiency and OEE (Overall Equipment Effectiveness) Support equipment qualification and validation activities Implement predictive maintenance strategies Planning & Coordination Production Planning Participate in daily production planning meetings Coordinate with Planning department for material requirements Monitor inventory levels and ensure material availability Optimize production sequences and batch sizes Manage production priorities and urgent requirements Cross-functional Coordination Coordinate with Quality Control for sampling and testing Liaise with Warehouse for material receipt and dispatch Work with Engineering for technical support and improvements Collaborate with other shifts for seamless operations Support Supply Chain for delivery commitments Required Qualifications Educational Background Essential : Bachelor's degree in Pharmaceutical Sciences, Other Science Streams, Chemical Engineering, or related field Preferred : Master's degree in Pharmaceutical Technology, Industrial Pharmacy, or MBA Experience Requirements Minimum Experience : 5-8 years in pharmaceutical manufacturing operations Leadership Experience : At least 2-3 years in supervisory or team leadership roles Industry Experience : Solid oral dosage form or injectable manufacturing experience Shift Management : Previous experience in shift operations and 24/7 manufacturing environment Regulatory Experience : Exposure to regulatory inspections and compliance requirements Technical Competencies Manufacturing Processes : Deep understanding of pharmaceutical manufacturing processes and equipment Quality Systems : Thorough knowledge of cGMP, ISO standards, and quality management systems Equipment Knowledge : Familiarity with tablet compression, coating, packaging, and related equipment Documentation : Proficiency in batch record review, deviation handling, and GMP documentation Problem Solving : Strong analytical and troubleshooting skills for production issues Leadership & Management Skills Team Leadership : Proven ability to lead and motivate production teams Communication : Excellent verbal and written communication skills in English and Hindi Decision Making : Ability to make quick decisions under pressure Conflict Resolution : Skills in handling team conflicts and personnel issues Training : Experience in conducting training and development programs Job Types: Full-time, Permanent, Fresher Pay: ₹50,000.00 - ₹70,000.00 per month Benefits: Commuter assistance Education: Bachelor's (Required) Experience: pharmaceutical production: 2 years (Required) Production management: 2 years (Preferred) Work Location: In person

Job Title: Production Manager – Sterile Injectable Manufacturing Location: Ankleshwar, Gujarat Salary: Up to ₹15-18 LPA (Based on Experience) Industry: Pharmaceutical Manufacturing Employment Type: Full-Time, Permanent Position Summary: We are hiring a Production Manager to lead and optimize sterile injectable production (ampoule, vial, and lyophilization lines) at our Ankleshwar facility. The ideal candidate will ensure seamless operations while maintaining cGMP compliance, timely delivery, and continuous improvement in productivity. Key Responsibilities: Develop and implement annual production plans for ampoule, vial, and lyophilized vial lines. Monitor daily production output, yield, and OEE; implement timely corrective actions to meet performance targets. Ensure strict compliance with SOPs, safety norms, and regulatory standards (FDA, WHO-GMP). Supervise the preparation, validation, and auditing of Batch Manufacturing Records (BMR) and Batch Packing Records (BPR). Liaise with QC/QA teams for in-process checks, documentation review, and batch release activities. Lead a team of supervisors and operators; conduct regular training, performance evaluations, and skills enhancement programs. Champion continuous improvement initiatives such as 5S, Kaizen, and Six Sigma to reduce rejections and machine downtime. Qualifications & Experience: Bachelor’s or Master’s degree in Pharmaceutical Technology, Chemistry, or related field. Minimum 8 years of experience in sterile injectable production, with at least 3 years in a managerial role . Mandatory: Hands-on experience in liquid ampoule, liquid vial, and lyophilized vial manufacturing lines. Strong leadership, problem-solving, and communication skills are essential. With Regards, Himani(HR) 9377165778 Job Types: Full-time, Permanent Pay: ₹100,000.00 - ₹150,000.00 per month Work Location: In person

Position: Quality Engineer Location: Kathwada GIDC, Ahmedabad – 382430 Industry: Plastic Processing Machinery / Manufacturing Experience: 1+ Year (Experience with all quality instruments required) Job Responsibilities: Perform quality checks using various measuring instruments (Vernier, Micrometer, Height Gauge, Dial Gauge, etc.) Inspect incoming, in-process, and final-stage products Maintain proper QC documentation and reports Coordinate with production and design teams to resolve quality issues Ensure adherence to quality standards and company policies Requirements: Diploma / BE in Mechanical or relevant field Minimum 1 year of hands-on experience with quality instruments Good understanding of engineering drawings and tolerances Strong attention to detail and documentation Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Leave encashment Provident Fund Schedule: Day shift Supplemental Pay: Overtime pay Yearly bonus Education: Diploma (Preferred) Experience: Quality Engineer: 1 year (Preferred) Location: Kathwada, Ahmedabad, Gujarat (Preferred)

1.1 Review of supplier test report / certificate against drawings / specifications for all raw material. 1.2 Inspection of Semi-finished, finished, outsourced incoming material. 1.3 Tagging (accepted, rework, rejected) on QC approved materials. 1.4 Communication to purchase, vendors, stores, planning about the quality status of the material. 1.5 Raising of non-conformance report in case of any quality related issues. 1.6 Conducting in process inspection of materials as per drawing and updating and reporting the status. 1.7 Emailing to purchase department and vendor in case of any quality issues and sending non-conformance report. 1.8 Conducting final inspection and preparation of final inspection report. 1.9 Ensure ISO Related work is done effectively. Example - To Prepare Documents, Check Sheet, Reports. 1.10 To put entry into the ERP for the job cards raised for QC approval. 1.11 To raise deviation report after consulting Quality Manager. 1.12 Maintaining Quality Report files. 1.13 Establishing and Implementing SOPs within the department. 1.14 Preparation of monthly MIS / KRA sheet to the management 1.15 Maintaining and improving departmental safety and 5S. 1.16 Develop and implement quality assurance programs, policies, and procedures. 1.17 Monitor and audit all processes that impact quality, identifying and addressing potential issues. 1.18 Collecting and reviewing quality data to identify further scope of improvement in processes and product. 1.19 Manage and motivate a team of QA professionals, providing guidance and training. 1.20 Communication with various departments, vendors, management to ensure quality is maintained effectively and efficiently throughout the supply chain. 1.21 Ensure product quality standards w.r.t legal or statutory requirements are met and in alignment with regulatory requirement. Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹30,000.00 per month Benefits: Food provided Health insurance Paid sick time Provident Fund Work Location: In person

1) Client Company : Pharma Company 2) Position : Production Head 3) Experience Required : 10+ Years 4) Salary Negotiable : 15 LPA As Per Interview 5) Job Location : Ankleshwar 6) Job Description : Must have experience in sterile injectable manufacturing.  Develop & execute annual production plans for ampoule, vial and lyophilization lines  Monitor daily output, yield and OEE; implement corrective actions to meet targets  Ensure strict adherence to SOPs, safety rules and regulatory guidelines (FDA, WHO- GMP)  Oversee preparation, validation and periodic audit of Batch Manufacturing Records (BMR) and Batch Packing Records (BPR)  Coordinate with QC/QA for in-process checks, record reviews and batch release  Manage team of supervisors & operators; conduct training, performance reviews and skill development  Drive continuous improvement (5S, Kaizen, Six Sigma initiatives) to reduce rejects and downtime From Sneha HR 8487085519 Job Type: Full-time Pay: ₹95,000.00 - ₹125,000.00 per month Work Location: In person

Key Responsibilities: Daily Operations: Supervise and coordinate the activities of production workers. Ensure production schedules are met in a timely and cost-effective manner. Allocate tasks to workers and manage workflow on the production floor. Quality Assurance: Monitor output to ensure quality standards are met. Address product defects and initiate corrective actions when necessary. Work closely with the QA/QC team to maintain standards. Team Leadership: Train, coach, and evaluate production staff. Promote a culture of teamwork, accountability, and safety. Resolve employee issues or escalate as needed. Process & Efficiency Improvement: Recommend and implement improvements to production processes. Monitor machine utilization, minimize downtime, and optimize efficiency. Support lean manufacturing and continuous improvement initiatives. Health & Safety: Enforce compliance with health and safety regulations. Conduct safety checks and ensure proper use of PPE and equipment. Report and investigate accidents or unsafe practices. Reporting: Maintain accurate production records, including shift reports and downtime logs. Communicate production updates and challenges to management. Participate in daily production meetings. Job Types: Full-time, Permanent Pay: ₹18,000.00 - ₹20,000.00 per month Schedule: Day shift Shift availability: Day Shift (Preferred) Work Location: In person

Key Responsibilities: Production Planning & Execution: Develop daily, weekly, and monthly production schedules. Ensure optimal resource utilization (manpower, materials, machines). Monitor production to ensure targets and deadlines are met. Quality & Compliance: Ensure products meet quality standards and regulatory requirements. Implement and maintain standard operating procedures (SOPs). Collaborate with the QA/QC team to resolve quality issues promptly. Team Management: Lead and supervise production staff; ensure proper training and development. Promote a culture of safety, accountability, and continuous improvement. Monitor workforce performance and handle disciplinary actions if required. Cost Control & Efficiency: Identify areas for cost savings and process improvements. Reduce waste and downtime; improve machine utilization. Monitor production costs and adjust workflows as needed. Health, Safety & Environment (HSE): Ensure compliance with safety standards and regulations. Conduct regular safety audits and risk assessments. Promote a safe working environment. Reporting & Communication: Maintain production logs and reports. Liaise with procurement, maintenance, logistics, and quality teams. Provide regular updates to senior management. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹35,000.00 per month Schedule: Day shift Work Location: In person

1. Coordination across all disciplines. 2. Quality Assurance & Quality Control across all stages of Procurement & Production. 3. Preparing WPS and PQR and update and train the welders. 4. Documentation and Report Preparation as per ISO Standard and Customer requirements. 5. Performing QA/QC activities at all group units, including those currently at Makarpura and Por. Currently, your reporting and office is at the Makarpura unit, but this may change from time to time. We will reimburse the additional transportation cost on an actual basis if required. 6. Implementation and Maintaining ISO and other quality management system as per standard and Customer requirements. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Paid sick time Paid time off Provident Fund Education: Bachelor's (Preferred) Experience: Total Work: 2 years (Preferred) Work Location: In person

Key and Knowledge Required - Knowledge of Blanding - Knowledge of Review document of qc and production - review of BMR - Knowledge of Deviation - Knowledge of Incident - Knowledge of CAPA - Knowledge of APQR and Trend - Preparation of document like BMP, MPR, Raw Data sheet etc .... Contact Information : Dipak Patel QA head Email: HR@nexuspharma.com Please note physical interview Compulsory, No telephonic interview Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Education: Bachelor's (Preferred) Experience: total work: 2 years (Preferred) Work Location: In person

Ensuring Product Quality: QC Engineers are responsible for ensuring that products meet specified quality standards and customer expectations throughout the manufacturing process. Developing and Implementing Quality Control Systems: They play a crucial role in developing and implementing quality control systems, procedures, and processes to ensure consistency and adherence to standards. Conducting Inspections and Testing: QC Engineers conduct thorough inspections and tests on raw materials, components, and finished products to identify any defects or deviations from specifications. Analyzing Data and Identifying Issues: They analyze data from inspections and tests to identify trends, root causes of quality problems, and areas for improvement. Implementing Corrective and Preventive Actions: QC Engineers work with cross-functional teams to implement corrective and preventive actions to address identified quality issues and prevent recurrence. Documentation and Reporting: They maintain detailed records of inspections, tests, and corrective actions, and prepare reports to document quality performance and identify areas for improvement. Collaborating with Teams: QC Engineers collaborate with various departments, including production, engineering, and supply chain, to ensure that quality standards are met throughout the entire process. Staying Updated: They stay current with industry trends, new technologies, and regulatory requirements related to quality control to continuously improve processes and procedures. Job Types: Full-time, Fresher Pay: ₹17,000.00 - ₹22,136.10 per month Benefits: Health insurance Work Location: In person

Key Responsibilities: Monitor and inspect all civil and passive infrastructure works including tower foundation, erection, shelter installation, DG, and battery setup to ensure compliance with quality standards. Conduct regular site quality audits and inspections during and after installation activities. Verify workmanship, materials, and installation practices as per standard operating procedures (SOPs), project specifications, and IS/BS/IEC codes. Ensure proper documentation of test reports, inspection checklists, and quality records. Assist in developing and implementing site-specific Quality Assurance/Quality Control (QA/QC) plans. Coordinate with site engineers, contractors, and vendors to resolve quality issues. Report non-conformities and ensure corrective/preventive actions are implemented effectively. Maintain records of material approvals, calibration certificates, and compliance reports. Provide training or guidance to site teams on quality protocols and best practices. Ensure adherence to health, safety, and environment (HSE) standards during inspections. Required Skills & Competencies: In-depth knowledge of telecom passive components (e.g., towers, shelters, earthing systems, power systems). Strong understanding of QA/QC procedures, audit practices, and technical specifications. Familiar with national and international quality standards in telecom infrastructure. Ability to read and interpret technical drawings and specifications. Proficient in preparing site reports and maintaining quality documentation. Strong communication, analytical, and problem-solving skills. Qualifications & Experience: Diploma/Bachelor’s degree in Civil/Electrical Engineering or related field. 2–5 years of experience in telecom infrastructure quality assurance, preferably in passive telecom works. Familiarity with telecom infrastructure projects Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹35,000.00 per month Benefits: Health insurance Paid sick time Provident Fund Schedule: Day shift Morning shift Application Question(s): Do you know about foundation strengthening? How many total years of experience in Telecom- Passive? Do you know about NDT? Do you know about SST, BFS? Experience: Quality assurance: 4 years (Required) Work Location: In person

Job Title Production Assistant Manager – Galvanizing Location Sikandrabad, Uttar Pradesh Department Production / Operations – Galvanizing Division Reports To Production Manager / Plant Head Job Purpose To assist in managing and optimizing the galvanizing production line to achieve quality, productivity, safety, and cost targets while ensuring compliance with industry standards and certifications (ISO 9001, IATF‑16949, AS9100D, ISO‑14001, ISO 45001). Key Responsibilities Production Management Supervise day-to-day operations of the galvanizing process line for pipes, tubes, and structural products. Ensure production targets (MT/day) are met as per the schedule. Coordinate with planning and dispatch teams to meet delivery commitments. Quality Assurance Monitor coating thickness, zinc adhesion, and surface finish to meet product specifications. Implement corrective actions for quality deviations in coordination with QA/QC teams. Maintain records for traceability and audits. Process & Equipment Optimization Monitor bath temperature, flux quality, and zinc consumption for optimal efficiency. Assist in preventive maintenance planning and breakdown management with the maintenance team. Recommend process improvements to reduce costs and wastage. Safety & Compliance Ensure adherence to EHS (Environment, Health & Safety) guidelines. Train operators and workers in safe galvanizing practices. Ensure compliance with statutory and ISO standards. People Management Lead and guide shift supervisors and shop-floor operators. Conduct on-the-job training to upgrade workforce skills. Maintain discipline and resolve operational conflicts. Required Skills & Competencies Strong knowledge of hot-dip galvanizing process and surface treatment techniques. Understanding of production planning, cost control, and lean manufacturing principles. Ability to read and interpret engineering drawings and process sheets. Proficient in MS Office, ERP/SAP production modules. Leadership, decision-making, and problem-solving skills. Qualifications & Experience Education: Diploma / B.Tech in Mechanical / Metallurgy / Production Engineering. Experience: 5–8 years in steel tube/pipe manufacturing, with at least 3 years in galvanizing operations. Preferred: Experience in large-scale, ISO-certified manufacturing setups. Key Performance Indicators (KPIs) Production volume vs. target. Rejection rate / quality compliance. Zinc consumption efficiency. Downtime hours (equipment and process-related). Safety incidents. How to Apply Send your updated resume to: resume@theactivegroup.in For Immediate Inquiries, Contact: 63588 12301 | 99045 82301 Job Type: Full-time Pay: ₹80,000.00 - ₹120,000.00 per month Benefits: Health insurance Provident Fund Schedule: Day shift Work Location: In person

Job Description: We are looking for an experienced and resourceful Production Manager to lead the production operations in our high-fashion garment manufacturing unit . The ideal candidate must have strong industry knowledge, hands-on production expertise, and access to a reliable network of suppliers, vendors, and job workers to ensure timely and high-quality output. Key Responsibilities: Plan, schedule, and oversee the complete production cycle – from sampling to final dispatch Manage and coordinate with internal teams (cutting, stitching, finishing, QC) and external job workers Ensure timely procurement of fabrics, trims, and other materials through trusted industry contacts Maintain high standards of quality control and garment finishing Monitor production costs, timelines, and efficiency Address any production bottlenecks or delays proactively Ensure compliance with safety, labor, and environmental regulations Work closely with design and merchandising teams to align production with seasonal timelines Job Type: Full-time Pay: ₹29,900.00 - ₹42,800.00 per month Benefits: Cell phone reimbursement Schedule: Day shift Supplemental Pay: Yearly bonus Experience: Manufacturing: 3 years (Required) Work Location: In person

the quality of leather bag samples during the development phase. This role ensures all samples meet design specifications, brand standards, and functional requirements. The position also coordinates between designers, production teams, suppliers, and clients to ensure smooth communication and timely sample delivery. Key Responsibilities: Quality Control Duties:  Inspect leather bag samples at each stage (cutting, stitching, assembly, finishing).  Check quality of raw materials (leather, lining, hardware, threads).  Compare final samples with tech packs, design sketches, and specifications.  Identify defects, inconsistencies, or deviations in sample construction.  Provide feedback to pattern makers, tailors, and production staff for corrections.  Approve or reject samples before they are sent to clients or buyers. Coordination Duties:  Act as a liaison between design, sampling, and production teams.  Track sample development timelines and ensure deadlines are met.  Schedule fittings or reviews with design and merchandising teams.  Maintain sample records, QC reports, and sample development logs.  Coordinate with raw material vendors for timely supply during sampling.  Assist in communicating changes in design or construction methods.  Arrange dispatch of approved samples to clients or buyers. Qualifications:  Bachelor’s degree or diploma in Leather Technology, Industrial Engineering, or related field.  3-5 years of experience in leather goods manufacturing [Bags & Wallets]. Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹30,000.00 per month Benefits: Health insurance Paid sick time Provident Fund Work Location: In person

1. Perform routine inspections and tests on raw materials, in-process goods, and finished products 2. Maintain accurate records of inspections, tests, and corrective actions. 3. Identify areas of process variation and work with production teams to correct deviations. 4. Support audits—internal, customer, and regulatory—by providing QC data and documentation. Job Type: Full-time Pay: ₹10,000.00 - ₹15,000.00 per month Benefits: Leave encashment Provident Fund Work Location: In person

Job Title Project Coordinator Job Description Summary Preparation and implementation of QA/QC policies and procedures Carry out audits for ISO 9001, 14001 and OHSAS 18001 and recommend the necessary corrective actions and measures Job Description Project Coordinator This role is responsible for the implementation and maintenance of the quality management system. About the Role: Monitor policies and procedures and report any areas where improvement is required Assist the Project/Construction Managers in reviewing the contractor’s specific quality plans and produce recommendations Ensure timely and effective resolution for QA or QC issues, in coordination with Construction Manager/Consultant/Department Head Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site. Carry out inspection and checking for all quality related procedures in the site and ensure activity at the site are as per approved method statement and inspection test plan. Coordinate with the contractor’s representative and Site Engineer in charge for inspection and meeting about quality problems including the closure of Non-Compliance Report. Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and Site Instruction, SI. Responsible for the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations. Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project. Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP. Liaise with Contractors quality Engineer for submission of material submittals to Consultant. About You: B.E Civil with 5 to 10 years of experience of QA/QC in construction industry Technical awareness of civil, electro-mechanical, and architectural works Excellent organizational and motivational skills Outstanding attention to detail and observation ability Exceptional communication and interpersonal abilities Why join Cushman & Wakefield? As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from; Being part of a growing global company; Career development and a promote from within culture; An organisation committed to Diversity and Inclusion We're committed to providing work-life balance for our people in an inclusive, rewarding environment. We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program. We have a vision of the future, where people simply belong. That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, sex, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us. INCO: “Cushman & Wakefield”

NEED A CIVIL - QC IN-CHARGE (CIVIL) FOR OUR SITE Experience : 8-10 Years Work Location : Barwani - M.P. Education : Diploma/B.E Civil Job Description Key Responsibilities : Conducts inspections, tests materials, and enforces compliance with specifications and codes. With 8–10 years’ experience, they lead the QA/QC team, maintain documentation, coordinate with clients and contractors, and drive continuous improvement in construction quality and safety practices. With 8–10 years’ experience, they lead the QA/QC team, maintain documentation, coordinate with clients and contractors, and drive continuous improvement in construction quality and safety practices. Job Type: Full-time Pay: ₹30,000.00 - ₹40,000.00 per month Benefits: Food provided Provident Fund Schedule: Day shift Education: Diploma (Preferred) Experience: total work: 8 years (Preferred) Work Location: In person Speak with the employer +91 9274698906

Job Description Designation - Tender Executive (Female Candidate Preferred) Roles & Responsibilities - Daily Browsing of Tenders and Circulations of Tenders. To coordinate, prepare and compile bid submission documents in relation to tendering/bidding activities, tender questionnaires and pre-qualifications. To monitor and ensure that tender submission due dates are strictly adhered to, including the checking, binding, packing and preparation of outgoing submissions. To ensure that tender submissions are standardized in terms of format, font, logo, etc. and in line with customers tender requirements. Keeping a Follow up of Tender Registration & Payments in various Govt. Department. To organize and harness the efforts of all involved departments relating to tendering/bidding activities and contract review. To coordinate customer’s bid requirements within the various departments such as planning, QA/QC, HSE, Engineering, Production, etc., collate and compile all queries and requests for additional information for communication to customers. Should be responsible to handle tenders published. Support and prepare proposal documentation and compliance. Desired Skills - Excellent letter drafting skills is a must. Having good experienced in Government E-Market Place and business opportunities in the form of Government bids and tenders through GEM/ E-Procurement Portal. Practical experience in a similar position advantageous. Should know English & Hindi typing. Should have basic working knowledge of MS office suite. Education - Bachelor’s degree in any stream. Experience - 1 year of experience in relevant field. Timings - 10:00 AM – 6:30 PM Job Types: Full-time, Permanent Pay: ₹12,000.00 - ₹18,000.00 per month Benefits: Provident Fund Schedule: Day shift Morning shift Expected Start Date: 11/08/2025

Job Title: QA Manual Tester Experience: 2 Years Location: Encanto Technologies, 305-308, Commerce House Building, Indore Employment Type: Full-time Joining: Immediate Joiner Preferred ________________________________________ About the Company: Encanto Technologies is a growing IT services company based in Indore, focused on delivering high-quality software development and testing solutions. We believe in a performance-driven work culture and a collaborative environment. ________________________________________ Key Responsibilities: Understand business requirements and translate them into detailed test cases and scenarios Perform manual testing of web and mobile applications Report bugs clearly and concisely using bug-tracking tools Perform regression, integration, functional, and user acceptance testing Work closely with developers and business analysts to ensure timely and accurate delivery Document test results and maintain test logs Identify gaps in test coverage and proactively improve test processes ________________________________________ Required Skills: Minimum 2 years of experience in manual testing Strong understanding of the software testing life cycle (STLC) Experience in writing clear, concise, and comprehensive test cases Familiarity with bug tracking tools like Jira, Bugzilla, or similar Basic knowledge of SQL and database validation Good communication skills and attention to detail Ability to work independently and as part of a team To Apply: Send your resume to hr@encantotek.com Job Type: Full-time Pay: ₹15,000.00 - ₹20,000.00 per month Benefits: Leave encashment Schedule: Day shift Education: Bachelor's (Required) Experience: Manual Testing : 1 year (Required) QA/QC: 1 year (Required) Language: English (Required) Location: New Palasia, Indore, Madhya Pradesh (Required) Work Location: In person Speak with the employer +91 9753711340 Application Deadline: 25/08/2025 Expected Start Date: 25/08/2025

Job Title Project Engineer Job Description Summary Preparation and implementation of QA/QC policies and procedures Carry out audits for ISO 9001, 14001 and OHSAS 18001 and recommend the necessary corrective actions and measures Job Description Asst. Manager / Sr. Engineer / Engineer – QA/QC This role is responsible for the implementation and maintenance of the quality management system. About the Role: Preparation and implementation of QA/QC policies and procedures Carry out audits for ISO 9001, 14001 and OHSAS 18001 and recommend the necessary corrective actions and measures Monitor policies and procedures and report any areas where improvement is required Assist the Project/Construction Managers in reviewing the contractor’s specific quality plans and produce recommendations Ensure timely and effective resolution for QA or QC issues, in coordination with Construction Manager/Consultant/Department Head Perform all daily inspection and test of the scope and character necessary to achieve the quality of construction required in the drawings and specifications for all works under the contract performed ON or OFF site. Carry out inspection and checking for all quality related procedures in the site and ensure activity at the site are as per approved method statement and inspection test plan. Coordinate with the contractor’s representative and Site Engineer in charge for inspection and meeting about quality problems including the closure of Non-Compliance Report. Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents. Responsible for the closure of Non-conformance, NCR and Site Instruction, SI. Responsible for the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations. Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project. Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP. Liaise with Contractors quality Engineer for submission of material submittals to Consultant. About You: B.E Civil with 5 to 10 years of experience of QA/QC in construction industry Technical awareness of civil, electro-mechanical, and architectural works Excellent organizational and motivational skills Outstanding attention to detail and observation ability Exceptional communication and interpersonal abilities Why join Cushman & Wakefield? As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from; Being part of a growing global company; Career development and a promote from within culture; An organisation committed to Diversity and Inclusion We're committed to providing work-life balance for our people in an inclusive, rewarding environment. We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program. We have a vision of the future, where people simply belong. That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, sex, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us. INCO: “Cushman & Wakefield”

Job Title Senior Project Manager Job Description Summary This role is responsible for planning, organizing, and managing resources to ensure that projects are completed on time, within budget, and to the required quality standards. Construction Project Engineers work closely with architects, contractors, and other stakeholders to ensure that projects are executed according to plan. Job Description Sr. Engineer This role is responsible for planning, organizing, and managing resources to ensure that projects are completed on time, within budget, and to the required quality standards. Construction Project Engineers work closely with architects, contractors, and other stakeholders to ensure that projects are executed according to plan. About the Role: Monitor progress of work with respect to Master project schedule Monitoring the execution of work at site to ensure alignment to the drawings and specification. Timely reminders to all contractors about the delays in schedule Ensuring the workability and adherence to standards in the work statement/methodologies submitted by contractors for each item of work and ensuring the alignment to the same at site. Responsible for all site work related documentation for the assigned items of work. Anticipate and flag imminent bottlenecks. Take steps to avoid delays. Furnish necessary reports of critical activities and super critical activities to client. Advice contractors in enhancing the resource productivity by implementing various work study techniques. Monitor procurement of materials, equipment and labour by contractors with respect to the time schedule and advise them suitable measures for improvement. Administration of all contracts, and assistance in resolution of differences and disputes, if any, arising during the duration of contract. Assisting QA/QC – in – charge in ensuring all quality parameters are met. Assisting the safety team in implementing the safety standards at site; provide all support for making job safety analysis. Escalating to project manager about all abnormal developments with respect to progress of work, safety, quality, resources etc Clarifies specification and continuously liaise with accountable Project Manager internal. Monitors construction activity, schedule, milestone and adherence to budgets and initiates actions to minimize non-conformance cost. Provide cost saving solutions and negotiate contractor change orders. Manages the project’s risk management process. Implementation of systems requirements in the installation and test plans of the Contractor for the detailed planning and construction phase until final takeover is completed. Ensure project construction & safety management plan are fully implemented. About You: B.E Civil with 5 to 10 years of experience in buildings. Technical awareness of civil, electro-mechanical, and architectural works Excellent organizational and motivational skills Outstanding attention to detail and observation ability Exceptional communication and interpersonal abilities Why join Cushman & Wakefield? As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from; Being part of a growing global company; Career development and a promote from within culture; An organisation committed to Diversity and Inclusion We're committed to providing work-life balance for our people in an inclusive, rewarding environment. We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program. We have a vision of the future, where people simply belong. That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, sex, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us. INCO: “Cushman & Wakefield”

Location: Greater Noida Company: Dew Projects & Chemicals Pvt. Ltd. About Us: Dew Projects & Chemicals Pvt. Ltd. is a leading company in the water and wastewater treatment industry, specializing in innovative and sustainable chemical solutions. Our R&D and manufacturing facilities focus on high-quality chemical formulations and process optimization. Job Summary: We are seeking a detail-oriented and highly motivated Chemist to join our team. The successful candidate will be responsible for conducting chemical analyses and experiments in support of product development, quality control, and regulatory compliance. This role requires a strong background in analytical chemistry, problem solving skills, and the ability to work both independently and in a collaborative environment. Key Responsibilities: • Conduct qualitative and quantitative chemical analyses or experiments in laboratories. • Prepare test solutions, compounds, and reagents for laboratory procedures. • Analyze organic and inorganic compounds to determine chemical and physical properties. • Maintain accurate records of all experiments, results, and procedures. • Ensure all work complies with safety regulations and industry standards. • Collaborate with cross-functional teams including R&D, production, and QA/QC departments. • Calibrate and maintain laboratory instruments and equipment. • Assist in the development of new products or formulations. • Prepare technical reports and documentation for regulatory submissions or audits. Qualifications: • Bachelor’s degree or higher in Chemistry, Biochemistry, or a related field. • Proven experience in a laboratory environment (1-2 years preferred). • Proficient in using laboratory equipment and analytical techniques such as titration, spectroscopy UV • Strong understanding of safety procedures and chemical handling protocols. • Excellent problem-solving, organizational, and communication skills. • Knowledge of GLP, GMP, ISO standards, or other regulatory requirements is a plus. Preferred Skills: • Familiarity with statistical analysis and quality control tools. • Ability to work under pressure and manage multiple priorities. • Open to travel (After training- 10 to 15 days a month, company shall take care of all expenses) We look forward to welcoming motivated individuals eager to gain practical experience !

Description Summary of the role The successful candidate will be aligned with our Finance Operations – Global Accounts Receivable team and will be responsible for accounts receivable, customer queries and dispute resolution. You will be responsible for Cash Applications where in you need to have extensive knowledge and ability to perform day-to-day operations while maintaining SLA’s. Solving queries related to cash applications and coordination with customers is required. You should have a basic level understanding of O2C process, specifically cash application process involving research and application of unapplied cash, reconciliation of account, processing emails related to remittance advice from customers, etc. Responsibilities As part of our commitment to your development, you will also gain exposure in cross-functional and process improvement projects, and your core responsibilities will include following: Ensure timely closure of payments with high degree of accuracy Respond to customer queries through call and/or email Research unapplied payments and work with customer to identify the root cause and resolve open issues on account Work with internal teams to drive process improvements and resolve escalations and discrepancies on customer account Provide growth ideas for process standardization and automation through JDI/Kaizen projects Perform complex reconciliations on customer payments Perform QC and conduct refresher trainings with the team on best practice sharing Highlight and address issues with the technical teams related to the discrepancies with the ERP system Job requirements Must be fluent in German language skills Excellent written and verbal communication skills with strong customer service focus Ability to prioritize, multi-task and work with minimal supervision Drive for continuous learning and self-development Flexibility to change as per the changing requirements of the business Minimum 1-2 years experience in O2C domain, preferably cash application or Customer Service Intermediate knowledge of Excel – including working with pivot & formulas Flexible to work in late evening/night shifts Basic Qualifications Graduation or a Master’s Degree in Accounting/Finance or a related field. Previous experience 1-2 Years, preferably in Account Receivables, Collections, Dispute Management, Customer Service, or other customer facing role B2 level certification for language roles (German) Preferred Qualifications Previous experience 1-2 Years, preferably in Account Receivables, Collections, Dispute Management, Customer Service, or other customer facing role B2 level certification for language roles (German) Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Company - ADCI - Maharashtra Job ID: A3050637

Job Description Act as the key account manager in the team to the global stakeholders, developing internal client relationship (with global offices) based upon partnership and trust . Oversee key strategic client projects & all the requests. Work closely with GATEway PEM, Engineering Manager, Quality Assurance Manager and other senior personnel in ensuring the work is carried out to achieve the desired outcomes. Be responsible for ensuing operational dashboards are set up on a live basis for departmental monitoring. Impart training to the leaders & other team members; be the de facto chief for ensuring company culture. Shall actively helm Business Strategy and Development responsibilities for the Department. Attend and manage the project kick-off calls and other Client calls. Foster top performance and growth for your employees via excellent mentorship and leadership . Lead your team to deliver impeccable quality and client value . Report periodically to the internal stakeholders on the business performance and parameters. Ensure a L&D program is set up and implemented. Ensure and implement a robust client care program. Ensure and implement a QA / QC program. Ensure the department is in the forefront of digital transformation and automation. Qualifications & Requirements 15+ years of progressive experience in the construction industry, with a strong portfolio of Indian and international projects. Proven ability to confidently lead high-level client meetings, offering strategic insights and fostering long-term relationships. Holds a degree in Engineering; additional industry certifications are highly desirable. Should be an excellent communicator verbally and in writing Expert in building strong relationships with your team and clients through a shared purpose and sense of openness and fun. Have strong operational management experience in a dynamic environment Adept at developing and executing a professional, process-driven approach to all departmental functions and deliverables. Ability to work and delegate the work to a team and engage in ensuring optimum team productivity. Possess in-depth knowledge of how to define processes and improvise all the activities towards the quality deliverables Ability to manage team of multiple Estimators & Leaders Proficient in Client interactions and focussing on Client relationship building. Have the ability for generating innovation and solution-oriented approaches. About Us As a Gateway (PM) at IPS, you will lead highly experienced, culturally diverse, and passionate teams nurturing a strong social dynamic and a shared sense of achievement. We will empower, support, and enable you to take real responsibility in your role so that you can take charge of your career progression with us. You will be mentored and supported by industry / organization leaders and given the tools to grow. For us, lasting trusted relationships are everything, both with our teams and our clients.

Position: Hardware Product Manager Location: Ahmedabad Experience: 5+ years of experience in electronics product development or QA/testing in IoT or embedded hardware domains CTC: 8-9 LPA Key Responsibilities ● Production Oversight & QA/QC Management ○ Own the full hardware production lifecycle, from prototype validation to final production QA before shipping. ○ Ensure strict adherence to Standard Operating Procedures (SOPs) and quality benchmarks across every production batch. ○ Lead in-house electronics and production hardware testing – including PCB validation, component-level checks, and functional on-device verifications. ● Hardware & Embedded Systems Testing ○ Debug firmware on embedded systems (C/C++ and Python) and support real-time validation. ○ Perform rigorous on-device testing for hardware-software integration, edge-case simulations, and the product’s environmental resilience. ● Cross-Functional Coordination ○ Act as the bridge between R&D and Production teams—ensuring smooth handover and documentation of SOPs, Test Procedures, firmware versions, and calibration standards. ○ Collaborate with Hardware Support and Project teams to log, investigate, and resolve product issues and close customer feedback loops. ● Leadership & Team Management ○ Lead the Hardware QA and Production Testing Team with ownership, clarity, and accountability. ○ Establish a culture of discipline, traceability, and continuous improvement in production workflows. ○ Develop internal knowledge bases, SOPs, and training modules for the product onboarding. Eligibility & Requirements ● B.Tech/B.E/M.E in Electronics, Electrical, or Instrumentation. ● 5+ years of experience in electronics product development or QA/testing in IoT or embedded hardware domains. ● Proficient in Embedded C/C++, Python, and the use of hardware testing tools. ● Experience with version control systems (e.g., Git) and product release workflows. ● Proven skills in hardware diagnostics, debugging, and test report generation. ● Strong understanding of quality assurance practices, environmental testing procedures, and certification requirements. ● Excellent communication in English—both verbal and written. If your profile is matching with the requirement & if you are interested for this job, please share your updated resume with details of your present salary, expected salary & notice period.