3599 Piping Jobs - Page 50

Carry out planned and unplanned maintenance programs for the various systems such as (not limited to) the following : Communicate with engineering management and team leader with regards to possible improvements to increase efficiency Co-ordinate and inform engineering management and team leader of any disruptions to service of any kind Always implement safe work practices, efficient methods, proper preventative maintenance and repair Develop skills through training and hands on experience Comply with hotel and department policies and procedures at all times. Relevant Degree or Diploma

What’s The Role As an Associate Engineer – Reliability PEI, you will involve preparing and validating RBI data sheets, identify corrosion issues, and support inspections during maintenance. It includes creating maintenance task lists, supporting projects, and ensuring high-quality data. Your role also involves helping technical specialists, maintaining error-free data, participating in standardization efforts, and preparing inspection reports. Additionally, it requires interacting with site engineers, assisting with site documents, responding to data inquiries, and engaging with stakeholders to improve processes and data quality. What You’ll Be Doing Preparation of RBI data sheets, converting process flow diagram into material selection diagrams, identifying corrosion loops, identifying integrity operating windows and operating parameters from corrosion monitoring framework, preparing corrosion loop descriptions and tags, identification of dominant failure modes & damage mechanism, knowledge of RBI procedures. Support Inspection supervision of static equipment during asset Turnarounds. Ensure Data validation of all the templates, create automation tools in order to expedite the process and speedy implementation. Review error log sheet, finding solutions and implement the same for maintaining high quality data uploads in the system. Creating equipment specific task lists for preventive, corrective and shutdown maintenances of the static equipment like Vessels, Columns, Heat Exchangers etc, Support projects, maintenance & improvements activities performed at the operating units, manufacturing sites, chemical plants, supply chain and distribution locations. Enable the assigned asset operating units, manufacturing sites, chemical plants, supply chain and distribution locations and its on-site employees in producing and compiling high value maintenance information and data, as measured by improvement trends in data quality. Support the Technical Specialists and other engineers performing primary functions, with scope covering technical data and documents of the operating units, manufacturing sites, chemical plants, supply chain and distribution locations. This role is expected to help ensure: Data Maintenance for the site is performed error-free and within assigned controls (Clean the Stream). Assurance projects to extract, mine, clean, track, trend, analyze, or report are agreed with the site within local quality improvement plans. Provision, as a technical specialist, for Technical Support that enables the Site to leverage the benefits of utilizing the Engineering Tools to the fullest extent. Participation in Group and Operational Excellence (OE) team efforts to Standardize processes, tools, benchmarks, standards and best practices. The role may also be assigned as part of the Site Team or Project Team working under an Engineer- Reliability Static. Preparation of RBI data sheets, converting process flow diagram into material selection diagrams, identifying corrosion loops, identifying integrity operating windows and operating parameters from corrosion monitoring framework, preparing corrosion loop descriptions and tags, identification of dominant failure modes & damage mechanism, knowledge of RBI procedures. Support asset inspection activities during Turnarounds and other Major maintenance activities. Primary responsibility in Preparation, cleansing, validation of inspection data for w-IMS deployment in the designated/assigned OUs, RBI data preparation. Support in End-to-End RBI Assessment and implementation for Upstream/IG/Downstream sites within Shell using w-IMS tool. Preparation Inspection reports, analyzing the corrosion management framework, population of w-IMS templates. Create the Inspection, CAIR, RBI Re-assement & corrosion monitoring schedules based on the PEI methodology and align with maintenance plans and items in CMMS. Interact and communicate with the site inspection/integrity engineers to deliver the inspection work orders in CMMS. Assist the Team Leads/Technical Specialist to develop, maintain and manage the Site Reference Document along with the Assets/operating units. Assist the Team Lead/Technical Specialist in responding to inquiries related to the data and its functionality or use in a technical support function; including training site staff in ERPs or use of Request Tools, running pilot tests and demonstrations, increasing awareness of ERP functionality (e.g. using Measurement Points more effectively.) This Technical Support function includes supporting team leads and other staff on migration efforts. Other back up accountabilities, as follows: Engagement with the Site stakeholders such as Requestors and Approvers to communicate plans, obtain feedback, and solicit improvements. Assist the team leads/project focal to standardize processes, tools, methods, procedures as directed (Ex: Improving the data quality standards and best practices). Network with counterparts and other levels of organization across the different data centers. What You Bring University Degree in Engineering or Equivalent Engineering discipline At least 3 years of experience in Oil & Gas/ Petrochemicals or relevant field. Experience working in Inspection Management systems such as w-IMS and CMMS systems like SAP is desired API 510 or API 570 (at least 1) experience working with those standards is desired Field experience in inspection processes, corrosion monitoring and related technical know-how, knowledge of various NDT processes, inspection management plans, piping integrity and maintenance of static equipment like pressure vessels, heat exchangers etc, & knowledge in Risk Based Inspection (RBI) Methodology – API 570, 580, 510, 571 and 581. Field experience in conducting corrosion monitoring inspection, wall thickness measurements, CUI, and experience in fabric maintenance/different types of insulation and installation techniques. Preparation of work packs and procedures related to MMI. Experience in maintaining Downstream/Upstream/IG Asset hierarchy, EDW, AIM-EDMS, SPI Intools, IDMS, WIMS is preferred. Professional Engineering certification (API RBI-580/581/570/510 etc.) and ASNT LEVEL II is desirable. Proficiency in SAP PM/MM module, MS Excel, MS Access, AutoCAD, AutoPlant, and other design/drafting software is highly desirable. Effective communication, stakeholder management skills, and knowledge of Lean Six Sigma CI methodology are necessary. Virtual working experience is highly desirable. Other Skills: Developed engagement and communication skills, knowledge of technical data processes, Shell’s physical processing assets, and associated operating processes. Ability to handle complexity and detail, prioritize tasks, and ensure delivery. Flexible, adaptable, with initiative, analytical capabilities, and problem-solving skills. What We Offer You bring your skills and experience to Shell and in return you work with talented, committed people on one of the most important challenges facing our planet. You’ll have the opportunity to develop the skills you need to grow in an environment where we value honesty, integrity, and respect for one another. You’ll be able to balance your priorities as you become the best version of yourself. Progress as a person as we work on the energy transition together. Continuously grow the transferable skills you need to get ahead. Work at the forefront of technology, trends, and practices. Collaborate with experienced colleagues with unique expertise. Achieve your balance in a values-led culture that encourages you to be the best version of yourself. Join an organisation working to become one of the most diverse and inclusive in the world. We strongly encourage applicants of all genders, ages, ethnicities, cultures, abilities, sexual orientation, and life experiences to apply. Grow as you progress through diverse career opportunities in national and international teams. Gain access to a wide range of training and development programmes.

Job Summary: We are seeking a detail-oriented and proactive HVAC Purchase Engineer to handle procurement activities related to HVAC systems, including ducting, piping, chillers, VRV/VRF units, air handling units (AHUs), ventilation systems, and related electrical and mechanical components. The ideal candidate should have solid technical knowledge and strong negotiation skills to ensure cost-effective and timely procurement aligned with project requirements. Key Responsibilities: Understand HVAC project requirements and prepare Bill of Materials (BOM) and procurement plans accordingly. Source and evaluate suppliers and subcontractors for HVAC components and equipment. Obtain and analyze quotations, prepare comparison sheets, and negotiate for best prices and terms. Raise Purchase Orders (POs), ensure compliance with technical specifications and terms. Track and monitor material delivery schedules and coordinate with project and site teams. Maintain vendor records and track performance based on cost, quality, and delivery timelines. Liaise with stores and project teams to manage inventory and resolve delivery issues or material discrepancies. Coordinate with consultants and project managers for approvals and technical clarifications. Ensure procurement activities follow company policies and quality standards. Key Skills: Good knowledge of HVAC systems and components (chillers, VRV, AHUs, FCUs, ducting, etc.) Familiarity with procurement processes and vendor management Strong negotiation and communication skills Proficiency in MS Office, AutoCAD (basic understanding), and ERP systems (if applicable) Ability to read technical drawings and specifications Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹25,000.00 per month Schedule: Day shift Evening shift Morning shift Work Location: In person

n HVAC draftsman creates technical drawings to support the implementation of HVAC systems in buildings. They work closely with engineers and project stakeholders to translate HVAC design concepts into detailed drawings. Their responsibilities may include: Preparing shop drawings and MEP coordination layouts Preparing fresh air, exhaust air, and chilled water schematic layouts Preparing detail BOQs Preparing coordination drawings for internal and external sites, as well as plant rooms Preparing building duct work drawings Working on site piping layouts Drafting design scopes for kitchen appliances Heat load calculation Duct sizing Pipe sizing Ahu, Fcu, Axial fan, Chiller, Pump, Indoor units selection Pump header selection Parking ventilation Lift lobby ventilation Staircase ventilation VRV Dawing layout Chiller, AHU, FCU piping Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹30,000.00 per month Schedule: Day shift Evening shift Morning shift Supplemental Pay: Overtime pay Education: Diploma (Preferred) Experience: total work: 2 years (Required) Work Location: In person

Job Description - Purchase Manager Suitable candidates with 10 to 15 years of experience in the procurement of construction materials across various engineering disciplines, including Civil, Mechanical, Structural, Electrical, HVAC, Fire Fighting, Piping, and Safety items, to submit their applications. The construction materials such as, but not limited to, Structure steel, TMT, Aluminium works, cleaning agent, etc Candidates must possess a comprehensive understanding of the Bill of Quantities (BOQ) and relevant specifications issued by the client/owner. Construction materials must be sourced from approved vendors, ensuring that the quality aligns with the requirements of the client or owner. Proficiency in negotiation and the ability to engage constructively with approved vendors to obtain competitive pricing is essential. It is important to note that the candidates should be knowledgeable about current market prices for a wide range of construction items. Interested individuals are encouraged to apply. The remuneration will be commensurate with standards within the construction industry. Job Type: Full-time Pay: ₹35,000.00 - ₹45,000.00 per month Education: Bachelor's (Required) Experience: Accounts Executive : 4 years (Required) Work Location: In person

Company Description Deltaflow Solutions Pvt. Ltd. is a leader in thermoplastic and stainless steel piping systems, specialized application fluid handling solutions for critical industries. Established in 2003, we have over two decades of deep engineering expertise in designing, supplying, and executing reliable, corrosion-resistant, and high-purity piping systems globally. Our solutions are trusted by industries such as semiconductor fabs, solar cell production, pharmaceuticals, green hydrogen, speciality chemicals, and microelectronics. At Deltaflow, we deliver engineered solutions defined by purity, precision, and performance, backed by proven expertise. Role Description This is a full-time on-site role for a Technical Sales Engineer, located in Pune. The Technical Sales Engineer will be responsible for meeting sales targets by identifying and reaching out to potential clients, providing technical support, and conducting detailed sales presentations. The role involves maintaining customer relations, understanding client needs, and recommending suitable solutions from our product range. This position also requires collaboration with the engineering team to ensure customer requirements are met efficiently. Qualifications Technical Sales and Sales experience Technical Support and Sales Engineering skills Excellent Communication skills Ability to understand and explain technical products and concepts Experience in the fluid handling or piping system industry is a plus Bachelor's degree in Engineering, Technical Sales, or related field Strong problem-solving abilities and customer-focused mindset

Bachelor's degree in engineering, construction, or similar. Passport. Experience in a similar role. Sound knowledge of Piping Engineering, construction, and design. Great leadership and organizational skills. Superb project management skills. Ability to apply logical and critical thinking skills to projects. Great written and verbal communication skills. A willingness to learn. Drawing up work schedules and communicating any adjustments to crew members and clients. Gathering data, compiling reports and delivering presentations to relevant stakeholders. Delegating tasks and scheduling meetings and training sessions where required. Completing quality assurance and providing feedback to the team. Job Type: Full-time Pay: ₹20,000.00 - ₹45,000.00 per month Benefits: Food provided Provident Fund Schedule: Day shift Fixed shift Monday to Friday Work Location: In person Expected Start Date: 11/07/2025

Job Description Summary About our business GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification segments and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world’s challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. At GE Vernova, our Hydro Power division stands at the forefront of the hydroelectricity generation industry. We are dedicated to designing, manufacturing, and installing cutting-edge equipment for hydroelectric power plants, as well as servicing and refurbishing existing facilities to ensure optimal performance and longevity. Our turbines and generators account for over 25% of the total installed hydropower capacity worldwide. With a dynamic team of 3,600 professionals spread across more than 30 countries, we have the energy to change the world. Be part of a team that is not only shaping the energy landscape but also contributing to a more sustainable planet. Join us and make a difference with GE Vernova’s Hydro Power business division! Read more on www.gevernova.com About Position Responsible of Hydro Generator Auxiliaries Systems design on a given project. Execute process design engineering activities, perform calculation to size systems and associated equipment. Responsible to specify the components and main equipment of these systems, and ensure the technical follow-up of these equipment, making sure that there are delivered with highest level of quality, on-time and with full compliance to laws and directives. Collaborate and extend support to cross functional team for smooth interface and technical management. Job Description Roles and Responsibilities Understand, define the scope plan aligned with project contract specification and lead execution using technical guidelines, design reviews and taking into account the feedback from experiences and learnings. Make contract analysis, project planning, identify risk & opportunities and conceptual design & layout in project. Prepare technical queries, contract deviation request, assist in responses to client queries. Perform Basic Design, calculations, create P&ID and procurement specifications for Generator Auxiliary Systems (Heat exchangers, thrust bearing oil injection, Oil mist exhaust, Braking and Jacking system, Mist & dust extraction system, Firefighting system and their piping’s layout) Organize design review meeting at BD and DD stage. Responsible for the timely releases of the engg. documents for assembly & manufacturing and material lists related to auxiliary systems. Lead the interface management topics with other engg. cross-functions. Manage and execute work-packages with Product definition team. Contribute to lesson learned records in the appropriate tools to improve the equipment specifications management. Manage non-conformity reports, supplier deviation requests of Aux. system. Be involved in root cause analysis or PSR (8D, 5 Why’s, etc…) when a problem statement is raised inside engineering (for instance for analysis of CoPQ), Apply the ideas and concepts of reliability, quality, safety and cost. Accountabilities Execute with required Quality, within budget and specified lead times. Measurement On time delivery, Quality, Cost (components, engg hours) Educational Requirements : B. E. (Mechanical) or Higher At least 6 years of design experience in Auxiliary systems for Hydro Generator and Turbine with total desired experience of more than 9 years. Basic knowledge in following engineering disciplines: layout & arrangement, mechanical & electrical design, piping design, P&ID diagram, instrumentation, and control; Detailed knowledge of Hydro power plant operation; Good knowledge of Hydro Generator and Turbine Products and their design standards; Software familiarity: CAD tools - AUTOCAD and UG NX, MS Office, PLM (CORELLA); Strong technical and scientific know-how and willingness to continuously extend and develop it; Strong oral and written communication skills in English Behavioral and Technical Skills / Competencies Proactive, understanding of urgency, self-driven; Strong analytical & critical thinking skills; Good communication and leadership skills; Continuous improvement mindset; Ability to work in team, willingness to learn and adapt to the needs of the organization; Manage activity in multicultural and global environment What Do We Offer? Environment: A multicultural & diverse environment with an enthusiastic team and supportive leaders. We have a pleasant and modern work infrastructure at our offices Opportunities: We offer career growth opportunities, professional and personal trainings Benefits: We offer a competitive salary with multiple benefits like subsidized meals, medical, accidental & life insurance coverage. We provide home office opportunity and flexible working hours (subject to business and HR approval) Work model: hybrid (3 days office) Inclusion & Diversity: At GE Vernova, we believe in the value of your unique identity, background, and experiences. We are committed to fostering an inclusive culture, where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Please click here to learn more: www.gevernova.com/sustainability/thrive Additional Information Relocation Assistance Provided: Yes

Company Overview: Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, turboexpanders, services, and solutions for the liquefied natural gas (LNG), liquefied hydrogen (LH2), and industrial gases industries. Applications include fueling stations, marine engines, peak shaving, power generation, virtual pipelines, carbon capture, geothermal power and well stimulation. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with $1.5 B USD in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange. Job Overview: To ensure the piping integrity, safety, and efficiency of engineering projects through accurate analysis, design, and optimization of piping systems, while adhering to industry standards, codes, project specifications, regulatory requirements, and best practices. The requirements listed below represent the knowledge, skills, and abilities necessary for this role. Responsibilities: Essential Functions: Responsibilities: Piping Analysis and Piping Design: Utilize CAESAR II software for pipe stress analysis and AutoCAD for design of Piping Layout. Well verse with Piping Design calculations for Pipe sizing, Pipe thickness, Pressure & Temperature drop, Material selection, Valve selection, PMS development and Support selection. Develop piping designs that meet safety, stability, and performance requirements while optimizing material usage and construction costs. Modelling and Simulation: Create accurate 3D models of structures and piping systems within the respective software environments, considering geometry, material properties, loads, and boundary conditions. Perform simulations and analyses to predict the behaviour of Piping arrangement, including deflections, stresses, and dynamic response. Perform simulation for Nozzle load compliance (Centrifugal pumps, Compressor, Turbine and Process Vessels), Float check, CG balance, Safety Valve popup, Quick closing valve effect on software and ensure code compliance. Code Compliance: Ensure that piping designs comply with relevant codes, standards, and regulations applicable to the project contract, location and type of system. Prepare load cases to simulate various operating conditions like Sustain, Operating, Occasional. Well verse with Static & Dynamic stress analysis for cases like – Wind, Seismic, Snow and Surge Stay updated on industry codes and standards related to piping engineering to ensure compliance with the latest requirements. Well verse with local and international design Codes & Standards such as ASME B31.3, ASME B31.3, API, NFPA, AS & NR codes. Interdisciplinary Coordination: Collaborate with designers & Customer, other engineering disciplines, project managers, Production team, Purchase and stakeholders to integrate piping & process requirements with overall project goals and constraints. Coordinate with process, civil, mechanical, and other engineers to ensure that piping designs are compatible and properly integrated within the overall project. Technical Documentation: Prepare detailed engineering drawings like calculations, stress reports, stress isometrics and specifications documenting the piping analysis and design process. Prepare Specification for specialty items like Expansion Bellow, Spring supports, Struts and dampeners. Offer review and clear for manufacturing. Perform piping design calculation (spreadsheet based) Communicate design decisions, recommendations, and results to Lead Engineer or reporting manager, and other project stakeholders. Quality Assurance: Conduct quality checks on pipe stress models, analysis results, and design outputs to ensure accuracy, consistency, and compliance with project requirements and industry standards. Review overall system ensuring suitability of Mechanical strength and system integration Review and verify the work of other engineers or team members to ensure that designs meet quality and performance objectives. Authorities: Design Approval: Authority to design and approve piping stress model and systems within defined limits of complexity and budget Review and Sign-Off: Authority to review and sign off design calculations, stress reports, vendor documents and related documentation before submission for regulatory approvals or client review. Client Interaction: Authority to interact with clients to discuss project requirements, provide technical advice, and address any concerns or modifications needed. Compliance Enforcement: Authority to enforce compliance with industry standards, codes, and regulatory requirements within the scope of the projects they handle. Supervisory Responsibility: Supervisory responsibilities for a Piping Analysis Engineer may include guiding and mentoring junior engineers, coordinating project tasks, third party vendor management and ensuring technical accuracy in analysis and design projects. Work Environment: The work environment for a Piping Analysis Engineer typically involves office settings, though some fieldwork or site visits may be necessary for project assessments or client meetings. The work may involve collaborating with multidisciplinary teams, including civil engineers, mechanical engineers, and project managers. Additionally, they spend a significant amount of time utilizing specialized software, conducting analysis, preparing reports, and communicating with designers and Project managers. Physical Demands: Physical demands for a Piping Analysis Engineer are typical of office-based professional roles, with minimal physical exertion but potential for occasional travel and extended computer use. Qualifications: Education, Experience and Skills: Bachelor’s degree in mechanical engineering, or equivalent field. Total 8 to 12 years of experience with minimum 5 year exp. in Piping design & Piping stress analysis. Familiarity with local and international standards, codes, and regulations applicable to piping engineering and design. Proficiency in relevant software tools: Proficiency in CAESAR II Piping analysis software. Proficiency in AutoCAD design software. Understanding of PV Elite software is desirable. Strong analytical and problem-solving skills for interpreting engineering requirements and solving complex technical challenges. Knowledge of piping codes, regulations, and industry standards. Well-versed with international codes like ASME B31.3, API, NFPA, AS, NR etc. Excellent communication skills for collaborating with multidisciplinary teams, clients, and stakeholders. Attention to detail and ability to produce accurate engineering drawings, reports, and technical documentation. Relevant certifications or training on CAESAR II / PV Elite / Ansys software may be beneficial, demonstrating proficiency in using these tools for engineering analysis and design. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Electrical Design Engineer 1-5 years Qualification & Experience: BE/BTech in Electrical & Electronics Engineering or Diploma in Electrical Engineering Must have the experience of working with a consultancy firm or with an industry independently handling the design of the entire electrical installation for manufacturing industry, especially pharmaceuticals with complete knowledge of HT and LT. Coordinating with customer / internal teams for requirement gathering and carrying out load calculations. Preparation and submission of drawings required for statutory approvals to clients. Sizing of electrical equipment like HT & LT Switchgear, Transformers, DG sets, Cables, Main LT panels, PCC Panels, MCC Panels, Reactor/Capacitor Panels, UPS etc. Must be able to prepare tender documents and techno-commercial offers for new projects. Job Description: Carry out the load calculations of electrical systems for manufacturing plant / R&D centers with specialization in pharmaceuticals etc. Preparation of concept design and SLD Designing of power house and entire distribution system from HT incoming to lowest level of distribution. Selection of light fittings and accessories like Clean Room Light Fittings, Flame Proof light fittings, Light fittings for commercial space, Switches & Sockets etc. Designing of lighting taking into consideration the required lux level as per standards and requirement document and preparation of lighting layout. Designing of power circuits and preparation of power layouts. Coordinate with other stake holders like HVAC, Piping, Civil, Clean Room Panel team to provide/take necessary inputs during design stage. Finalize the size and specifications for all the electrical equipment like HT & LT Switchgear, Transformers, DG sets, Cables, Main LT panels, PCC Panels, MCC Panels, Reactor/Capacitor Panels, UPS etc. Preparation of BOQ with specifications and tender documents for complete electrical installation including electrical panels Designing of all the Low Voltage Systems like Fire Alarm System, Access Control System, CCTV, Door Interlock System and Voice & Data etc. Visit site and provide site clearance when required during execution. Other Skills required: Should make all necessary drawings using AutoCAD at reasonably good speed. Must have good communications skills and should be willing to travel when needed for client meetings/technical meetings. Should be a self-motivated personality with growth aspirations. Professionals with Pharmaceutical Industry experience will be given preference. Design knowledge of BMS (Building Management System) and EMS is desirable.

Job Title: PPH Fabricator Department: Production / Fabrication Reports To: Production Manager / Fabrication Head Experience: 3+ years in PPH fabrication or similar role Job Description: We are looking for a skilled PPH Fabricator with hands-on experience in high-quality welding, cutting, bending, and fabrication of plastic processing equipment. The ideal candidate should have expertise in handling PPH (Polypropylene Homopolymer) material and working on industrial products such as blower tanks, piping systems, banders, pressure vessels, filters, and fume hoods. Key Responsibilities: Perform PPH welding, hot gas welding, butt welding, and fusion welding as per design requirements. Cut, bend, and shape plastic sheets and components using proper tools and machinery. Fabricate and assemble blower tanks, piping lines, vessels, filters, banders, and fume hoods as per drawing/specification. Read and interpret technical drawings, blueprints, and fabrication layouts. Ensure all fabricated components meet quality and dimensional standards. Operate and maintain fabrication tools and equipment. Conduct fit-up, finishing, and leak testing of tanks and piping assemblies. Follow safety and quality protocols during all fabrication processes. Work closely with the QA/QC team and report any non-conformities. Maintain daily production records and material usage reports. Key Skills Required: Proficient in PPH welding techniques Knowledge of plastic fabrication tools and machines Skilled in cutting, bending, and assembly work Ability to handle PPH sheets, rods, and pipes Good understanding of industrial drawings and process equipment Experience in fabricating custom tanks, vessels, and chemical process units Educational Qualification: ITI / Diploma in Mechanical / Plastic Fabrication or equivalent Certification in plastic welding is an added advantage Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹60,000.00 per month Benefits: Provident Fund Schedule: Day shift Morning shift Work Location: In person

Must have working knowledge on Static Equipment/ Pressure Vessel such as Boilers, Heat Exchangers, Columns, storage tanks etc. Piping arrangements, piping isometrics, plot plan, equipment layout, piping class definition etc. Materials take-off, material specifications, valve material specifications, data sheets, vendor proposals Well conversant with ASME sections like Sec-II, Sec VIII Div-1, TEMA and B31.3 code calculations Stress analysis on joints, holes, vents, PRD & pipe supports. Should be able to perform the Stress calculations, MSOT and MAWP calculations for piping and pressure equipment. Should be able to model pressure vessel and heat exchangers in design software for analysis/ assessment. Should be conversant with code applicability and material selection criteria. Desired skills: Familiarity with industry codes such as ASME 31.3, Sec-II, Sec-V, Sec-VIII Div.1 & Div.2, Sec-IX, API-510, API-570, API for valves and commonly used ASME, API & ASTM codes. Hands on experience on tools such as PV-Elite, Plant Manager, CAESAR II, Navisworks, Smart Plant Review, Nozzle Pro, etc. – (Must know at least two mentioned in the list) Demonstrated organizational, coordination, planning, interface and technical judgment skills. Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities. Good leadership, influencing, and interpersonal skills. Excellent communication skills and ability to read, write, and speak English. Good to have skills: Experience in live Plant Operations will be an additional advantage. Industry type Oil & Gas Department Production, Manufacturing & Engineering Role Engineering - Other Role category Engineering Employment type Full Time, Permanent Job Types: Full-time, Permanent Pay: ₹103,000.00 - ₹110,000.00 per month Benefits: Life insurance Provident Fund Schedule: Day shift Work Location: In person

Shift (10 Hours) Kandla Gujarat India Surveyor - Piping Inspection Engineering Job Description Conduct inspection of piping, modular structures, and steel fabrication Ensure quality standards and compliance throughout fabrication stages Interpret fabrication drawings and align inspection processes Collaborate with QA/QC and production teams to resolve non-conformities Offered Salary ₹62,000.00 - ₹70,000.00 Required Experience 8 Yr(s) - 10 Yr(s) Jobs Position Information Position: Surveyor - Piping Inspection Min. Qualification Diploma Date Posted July 93, 2025

Posted Date : 08 Jul 2025 Function/Business Area : Manufacturing Location : Jamnagar Job Responsibilities : . To carry out detailed engineering as per codes standards, statutory requirements and best engineering practices. To issue accurate deliverables such as Feasibility report, Cost Estimates, Drawing Reports, Troubleshooting & recommendations, procurement documents, vendor documents Review Report. Ensuring proposed schemes are safe, technically feasible, and economical Inspection and testing Detailed engineering (Piping, Equipment & Structural) as per codes standards, statutory requirements and best engineering practices. Creation of Spare part drawings for in house shop manufacturing, tendering and import substitution. Following all the procedures of QMS, EMS and ensure adherence to current practices. Maintaining QMS/EMS documents and records in electronic medium Ensuring Proper Job allocation based on available man power resources and priority of jobs. Engineering decisions during in-house detailed engineering. Engineering decision while working with external detailed engineering contractors for major jobs. Education Requirement : Bachelor's Degree in Mechanical Engineering Experience Requirement : Knowledge of Static Equipment Design Engineering and Piping Engineering. At least three years relevant experience of working in EPC field. Knowledge and hands on experience on Design software will be added advantage Skills & Competencies : Analytical ability Self-Starter Proactive Good interpersonal skills Communication skills Decision-making ability Problem analyzing & solving ability .

Job Description Position: Welding Engineer Location: Silvassa /Project Site Department: Engineering / Maintenance Job Summary: We are seeking an experienced Welding Engineer to support our dairy automation projects. The ideal candidate will be responsible for developing and optimizing welding processes, ensuring the quality of stainless steel welding used in dairy equipment, and maintaining compliance with food-grade industry standards. This role requires expertise in sanitary welding, stainless steel fabrication, and process piping to support the production of high-quality dairy processing systems. Key Responsibilities: Develop, implement, and optimize welding procedures for stainless steel fabrication used in dairy processing equipment. Ensure all welding work complies with food-grade industry standards such as 3A Dairy Standards, ASME BPE, and AWS D18.1 for sanitary welding . Select appropriate welding techniques (TIG, MIG, orbital welding, etc.) and materials for dairy industry applications. Conduct welding inspections and ensure adherence to strict hygiene and quality control standards. Collaborate with design, production, and automation teams to improve welding processes for dairy machinery and piping systems. Train and guide welders in sanitary welding best practices, emphasizing smooth welds to prevent contamination. Monitor welding performance and address any defects or non-compliance issues through corrective actions. Maintain detailed records of welding procedures, material certifications, and inspection reports. Ensure compliance with GMP (Good Manufacturing Practices), HACCP, and other food safety regulations related to welded components. Required Qualifications: Bachelor’s degree in Welding Engineering, Mechanical Engineering, Metallurgy, or a related field . 4-5Years of experience in welding engineering, preferably in the dairy, food, or pharmaceutical industry . Strong expertise in welding stainless steel (SS304 & SS316L) and sanitary piping systems. Knowledge of TIG welding, orbital welding, and non-destructive testing (NDT) methods . Familiarity with sanitary design principles and food safety requirements . Ability to interpret welding codes and standards such as ASME BPE, AWS D18.1, and 3A Sanitary Standards . Strong problem-solving skills and ability to work in a fast-paced production environment. Experience with welding automation and robotic welding is a plus. Preferred Qualifications: Certified Welding Engineer (CWE) or Certified Welding Inspector (CWI) . Experience in dairy plant equipment fabrication (e.g., milk tanks, pasteurizers, piping, and CIP systems). Knowledge of corrosion resistance, heat treatment, and material selection for dairy applications . If you have the required expertise and want to be part of a team shaping the future of dairy automation, we encourage you to apply! Job Type: Full-time Pay: ₹300,000.00 - ₹600,000.00 per year Benefits: Health insurance Paid time off Provident Fund Schedule: Day shift Rotational shift Supplemental Pay: Yearly bonus Ability to commute/relocate: Vapi, Gujarat: Reliably commute or planning to relocate before starting work (Required) Education: Bachelor's (Required) Experience: 6years: 3 years (Required) Work Location: In person Application Deadline: 15/07/2025 Expected Start Date: 15/07/2025

Diploma / BE/B.Tech in Civil Engg. with 1-2 years exp. Food and Accommodation free Knowledge of building construction & related work, study of drawing. Survey, maps, topographical reports. Assess strength of soil, steel, cement, concrete. foundation. Estimation of labour, material & equipment required for project. MEP work (pumps/panels/internal piping/AC/sanitary/electrical etc.). Monitor contract labour work progress, maintaining standards, quality & safety. Keeping records of construction e.g. drawings, invoices, measurement sheets, challans, schedules etc. JCB / Excavator / Tractor log book, working efficiency. Random witness of the work & surveillance, Preparation / checking of measurement sheets, & calculation, documentation and reporting to Engineer / Project Manager. Collaborates with architect, consultant, contractors, vendors, workmen etc. Job Type: Full-time Pay: From ₹13,000.00 per month Benefits: Provident Fund Schedule: Day shift Rotational shift Work Location: In person

Role & responsibilities Attend to periodic and breakdown maintenance of all equipment and machinery. Identify critical parameters and design a checklist to ensure periodic inspection and smooth operation. Coordinate with Operations and Maintenance teams to facilitate the monitoring of daily and weekly maintenance activities EAM Implementation. Train operators to maintain equipment by cleaning, oiling, and greasing it. Diagnose faults, repair them, and return equipment to operational service Study the historical pattern of failures and accordingly incorporate a mitigation plan into the PMMS checklist. Conduct a Root Cause Analysis and promote a culture of change to eliminate operational malpractices. Identify critical spares based on lead times, price, and delivery, and maintain adequate inventory levels. Optimize equipment maintenance costs. Ensure 100% use of required PPEs Adhere to Work permit system. Adhere to MOC system Managing and reporting safety incidents. Ensure Cleanliness and orderliness Reduce mean Time between Failures (MTBF) and reduce cost of maintenance. Track all expenses directly related to equipment. Identify performance indicators for effectiveness of PPM in terms of failure reduction and cost of maintenance. Maintain historical records of equipment/vessels. Coordinate with OEMs for AMCs and enhance effectiveness of AMCs.

We have an urgent requirement for Piping Layout Engineer (Oil And Gas/ Chemical Industry) at Delhi Location (MNC Client). Job Type:- Permanent Client Payroll (MNC) Experience – 8 To 15 yrs in Oil and Gas/ Chemical Plants Piping Layout Engineering Qualification :- BE Mechanical. Job Profile :- 1) Preparation/ Review of Equipment Layout, Piping Layout. Should have experience in :- * Pipe Routing:- Pump, Heat Exchanger, Vessel, Colum, Pipe Rack as per P&ID. 2) Experience in Pipe Support, Special Pipe Supports, Piping GAD, Piping Isometric etc. 3) MTO 4 Can guide Junior Engineer and Designer. 5) Experience in Stress Analysis and 3D Modelling will be considered as an additional advantage.

We are looking for a highly experienced pipeline engineer to design and develop a variety of pipeline systems for our clients. In this role, you will design new pipelines, install and construct pipe infrastructure, and perform maintenance and repairs to existing pipelines. To be a successful pipeline engineer, you should be mathematically minded and highly accurate in your work. Skilled pipeline engineers should possess excellent analytical thinking and problem-solving abilities. Pipeline Engineer Responsibilities Meeting with clients to define pipeline requirements. Conducting site surveys and research to determine pipeline specifications and placement as well as pump sizes. Preparing and presenting technical materials such as cost estimates, pipeline layouts, and flow simulations. Calculating project requirements such as materials, budget, and time. Creating and developing digital designs such as pipeline maps, blueprints, and mechanical diagrams. Overseeing the construction and installation process of pipeline infrastructure and systems. Managing the project workflow and budget. Performing quality control assessments and ensuring that the pipelines comply with all technical and safety regulations. Performing maintenance, repairs, and upgrades to pipelines, as needed. Keeping up to date with the latest advancements in design software, technical standards, and construction techniques. Pipeline Engineer Requirements Bachelor's degree in civil, mechanical, or structural engineering. Professional Engineer (P.E.) license. A minimum of four years of experience as a pipeline engineer or similar. Proficiency in mechanical design software such as AutoCAD and Pipeline Studio. Excellent knowledge of PHSMA regulations. Experience with pipeline construction techniques such as welding, excavation, and assembly. Exceptional project management and organizational skills. Strong communication and leadership abilities. Willingness to travel and work in harsh weather conditions. This job is provided by Shine.com

We are looking for a highly experienced pipeline engineer to design and develop a variety of pipeline systems for our clients. In this role, you will design new pipelines, install and construct pipe infrastructure, and perform maintenance and repairs to existing pipelines. To be a successful pipeline engineer, you should be mathematically minded and highly accurate in your work. Skilled pipeline engineers should possess excellent analytical thinking and problem-solving abilities. Pipeline Engineer Responsibilities Meeting with clients to define pipeline requirements. Conducting site surveys and research to determine pipeline specifications and placement as well as pump sizes. Preparing and presenting technical materials such as cost estimates, pipeline layouts, and flow simulations. Calculating project requirements such as materials, budget, and time. Creating and developing digital designs such as pipeline maps, blueprints, and mechanical diagrams. Overseeing the construction and installation process of pipeline infrastructure and systems. Managing the project workflow and budget. Performing quality control assessments and ensuring that the pipelines comply with all technical and safety regulations. Performing maintenance, repairs, and upgrades to pipelines, as needed. Keeping up to date with the latest advancements in design software, technical standards, and construction techniques. Pipeline Engineer Requirements Bachelor's degree in civil, mechanical, or structural engineering. Professional Engineer (P.E.) license. A minimum of four years of experience as a pipeline engineer or similar. Proficiency in mechanical design software such as AutoCAD and Pipeline Studio. Excellent knowledge of PHSMA regulations. Experience with pipeline construction techniques such as welding, excavation, and assembly. Exceptional project management and organizational skills. Strong communication and leadership abilities. Willingness to travel and work in harsh weather conditions. This job is provided by Shine.com

Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Assistant Manager-Design (NASH) Location: Pune, India About Us NASH is the one of the major Brand of Ingersoll Rand & market-leading manufacturer of highly engineered liquid ring vacuum pump, compressors and Centrifugal systems as well as Dry vacuum systems that stand out through their high reliability and low total cost of ownership. Nash is a leading provider of vacuum solutions, serving chemical, petroleum, power, paper, mining, environmental, food, and wastewater treatment industries. For more than a century, we have been trusted by customers for delivering quality, reliability, value, and performance. Through our family of trusted brands, including NASH & GARO, Nash can provide a comprehensive range of single and two stage liquid ring vacuum pumps and compressors, dry pumps, steam ejectors, and engineered systems for industrial applications. Job Summary This position will be responsible for all the post order ETO project Design activities of NASH Liquid Ring Vacuum Pump & compressor Packages. Also to support Europe/other global customer wherever required. Key Responsibilities Responsible for all the NASH ETO project’s engineering and Design activities for the Liquid Ring Vacuum Pump/Compressor Packages. Responsible for detailed study of client’s specification/project specifications, job specific requirements, process datasheets, PFD, PID, API specification etc. and implement the same during the project Engineering and Design. Creation and PLM release of 3D parts/assemblies, Isometric, 2D drawings, Piping and technical documentation as per Ingersoll-Rand standards. Attend the HAZOP/SIL study,3D modelling review etc. during the project execution & getting necessary approval from the customer. Delivery of components, assembly, or system-level design tasks and participation in design and project reviews. Implementation of best engineering practices during the package design & manufacturing Visiting to customer place for technical discussion for concluding the issues during the project execution and getting necessary approvals. Essential Skills Strong experience with CAD modeling software (Inventor, and AutoCAD). Knowledge of auxiliary equipment Such as Heat Exchanger, Pressure vessel, Valves, Gear Box, Separators, ejectors etc. Knowledge of Dimensional Standard for Flanges, Fittings and Valves as per ASME, DIN etc. Coordination and communication between Project Engineer and cross function Team. Hands on experience with large assembly drawings, isometric drawings, GAD, P&ID, Bill of material, can read and understand data sheets Wiring Diagram, etc. Key Competencies Experience in Oil & Gas /Chemical complex ETO package handling experience. Experience in industries related to rotating equipment, compressors, blowers, fans, pumps, gearboxes, oil & gas, machine building, or any industries involving large rotating equipment. Ability to multitask and communicate with cross-functional teams, suppliers, and clients. Excellent communication skills in English. Candidates who have detailed knowledge on process, PFD, P&ID, API specifications and experience in core project engineering of rotating packages for Oil & Gas will be an added advantage. Basic Qualifications & Experience Bachelor’s degree in chemical/mechanical engineering with minimum 5 years of relevant experience in rotating equipment & packages project engineering and design activities. Travel & Work Arrangements/Requirements Fully office based, 10% travel across India. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit www.IRCO.com.

We are looking for a highly experienced pipeline engineer to design and develop a variety of pipeline systems for our clients. In this role, you will design new pipelines, install and construct pipe infrastructure, and perform maintenance and repairs to existing pipelines. To be a successful pipeline engineer, you should be mathematically minded and highly accurate in your work. Skilled pipeline engineers should possess excellent analytical thinking and problem-solving abilities. Pipeline Engineer Responsibilities Meeting with clients to define pipeline requirements. Conducting site surveys and research to determine pipeline specifications and placement as well as pump sizes. Preparing and presenting technical materials such as cost estimates, pipeline layouts, and flow simulations. Calculating project requirements such as materials, budget, and time. Creating and developing digital designs such as pipeline maps, blueprints, and mechanical diagrams. Overseeing the construction and installation process of pipeline infrastructure and systems. Managing the project workflow and budget. Performing quality control assessments and ensuring that the pipelines comply with all technical and safety regulations. Performing maintenance, repairs, and upgrades to pipelines, as needed. Keeping up to date with the latest advancements in design software, technical standards, and construction techniques. Pipeline Engineer Requirements Bachelor's degree in civil, mechanical, or structural engineering. Professional Engineer (P.E.) license. A minimum of four years of experience as a pipeline engineer or similar. Proficiency in mechanical design software such as AutoCAD and Pipeline Studio. Excellent knowledge of PHSMA regulations. Experience with pipeline construction techniques such as welding, excavation, and assembly. Exceptional project management and organizational skills. Strong communication and leadership abilities. Willingness to travel and work in harsh weather conditions. This job is provided by Shine.com

We are looking for a highly experienced pipeline engineer to design and develop a variety of pipeline systems for our clients. In this role, you will design new pipelines, install and construct pipe infrastructure, and perform maintenance and repairs to existing pipelines. To be a successful pipeline engineer, you should be mathematically minded and highly accurate in your work. Skilled pipeline engineers should possess excellent analytical thinking and problem-solving abilities. Pipeline Engineer Responsibilities Meeting with clients to define pipeline requirements. Conducting site surveys and research to determine pipeline specifications and placement as well as pump sizes. Preparing and presenting technical materials such as cost estimates, pipeline layouts, and flow simulations. Calculating project requirements such as materials, budget, and time. Creating and developing digital designs such as pipeline maps, blueprints, and mechanical diagrams. Overseeing the construction and installation process of pipeline infrastructure and systems. Managing the project workflow and budget. Performing quality control assessments and ensuring that the pipelines comply with all technical and safety regulations. Performing maintenance, repairs, and upgrades to pipelines, as needed. Keeping up to date with the latest advancements in design software, technical standards, and construction techniques. Pipeline Engineer Requirements Bachelor's degree in civil, mechanical, or structural engineering. Professional Engineer (P.E.) license. A minimum of four years of experience as a pipeline engineer or similar. Proficiency in mechanical design software such as AutoCAD and Pipeline Studio. Excellent knowledge of PHSMA regulations. Experience with pipeline construction techniques such as welding, excavation, and assembly. Exceptional project management and organizational skills. Strong communication and leadership abilities. Willingness to travel and work in harsh weather conditions. This job is provided by Shine.com

We are looking for a highly experienced pipeline engineer to design and develop a variety of pipeline systems for our clients. In this role, you will design new pipelines, install and construct pipe infrastructure, and perform maintenance and repairs to existing pipelines. To be a successful pipeline engineer, you should be mathematically minded and highly accurate in your work. Skilled pipeline engineers should possess excellent analytical thinking and problem-solving abilities. Pipeline Engineer Responsibilities Meeting with clients to define pipeline requirements. Conducting site surveys and research to determine pipeline specifications and placement as well as pump sizes. Preparing and presenting technical materials such as cost estimates, pipeline layouts, and flow simulations. Calculating project requirements such as materials, budget, and time. Creating and developing digital designs such as pipeline maps, blueprints, and mechanical diagrams. Overseeing the construction and installation process of pipeline infrastructure and systems. Managing the project workflow and budget. Performing quality control assessments and ensuring that the pipelines comply with all technical and safety regulations. Performing maintenance, repairs, and upgrades to pipelines, as needed. Keeping up to date with the latest advancements in design software, technical standards, and construction techniques. Pipeline Engineer Requirements Bachelor's degree in civil, mechanical, or structural engineering. Professional Engineer (P.E.) license. A minimum of four years of experience as a pipeline engineer or similar. Proficiency in mechanical design software such as AutoCAD and Pipeline Studio. Excellent knowledge of PHSMA regulations. Experience with pipeline construction techniques such as welding, excavation, and assembly. Exceptional project management and organizational skills. Strong communication and leadership abilities. Willingness to travel and work in harsh weather conditions. This job is provided by Shine.com

About Us: We are a leading engineering firm specializing in the design and construction of state-of-the-art HVAC systems and controlled environments. We are committed to delivering innovative and efficient solutions for our clients in the pharmaceutical, biotechnology, semiconductor, and other high-tech industries. We are currently seeking a highly motivated and experienced HVAC and Cleanroom Design Engineer to join our dynamic team. Job Summary: The HVAC and Cleanroom Design Engineer will be a key member of our project team, responsible for the design, engineering, and cost estimation of HVAC and cleanroom systems. The ideal candidate will have a strong background in mechanical engineering, a deep understanding of cleanroom standards, and proven experience in delivering cost-effective and compliant designs. Key Responsibilities: System Design and Engineering: Develop detailed HVAC and cleanroom system designs, including airflow diagrams, piping and instrumentation diagrams (P&IDs), and ductwork and piping layouts. Perform heating, ventilation, and air conditioning (HVAC) load calculations to determine system capacity and specifications. Select appropriate HVAC equipment, such as air handling units (AHUs), chillers, boilers, and fans, based on project requirements and energy efficiency goals. Design critical environments to meet specific ISO 14644 classifications, ensuring proper air change rates, pressure cascades, and filtration levels (HEPA/ULPA). Prepare comprehensive design documentation, including technical specifications, drawings, and schedules using AutoCAD, Revit, and other design software. Cost Estimation and Budgeting: Develop accurate and detailed cost estimates for HVAC and cleanroom projects, including equipment, materials, labor, and subcontracted services. Analyze project specifications and drawings to identify potential cost-saving opportunities and value engineering options. Prepare and present budget proposals to project managers and clients. Track project costs and provide regular updates on budget adherence. Standards and Compliance: Ensure all designs comply with relevant industry standards and regulations, including but not limited to: ISO 14644: Cleanrooms and associated controlled environments. ASHRAE: Standards for ventilation, energy efficiency, and indoor air quality. SMACNA: Sheet Metal and Air Conditioning Contractors' National Association standards for ductwork construction. Good Manufacturing Practices (GMP): As applicable to pharmaceutical and biotech facilities. Stay current with the latest advancements in HVAC technology, cleanroom design, and industry best practices. Project Collaboration and Support: Collaborate effectively with architects, structural engineers, electrical engineers, and other project stakeholders to ensure an integrated and coordinated design. Provide technical support and guidance to the construction and commissioning teams. Review and approve submittals from vendors and subcontractors. Participate in project meetings and site inspections as required. Qualifications and Skills: Bachelor's degree in Mechanical Engineering or a related field. Proven experience in HVAC system design, with a strong portfolio of cleanroom projects. In-depth knowledge of cleanroom design principles, including contamination control, airflow dynamics, and filtration. Demonstrated experience in cost estimation and budgeting for mechanical systems. Proficiency in AutoCAD, Revit, and HVAC load calculation software. Thorough understanding of relevant industry standards (ISO 14644, ASHRAE, SMACNA, GMP). Excellent analytical, problem-solving, and decision-making skills. Strong communication and interpersonal skills, with the ability to work effectively in a team environment. What We Offer: Competitive salary and benefits package. Opportunities for professional development and career growth. A collaborative and innovative work environment. The chance to work on challenging and rewarding projects that make a difference.