1627 Chemical Jobs - Page 5

Ensure cost effective process development. Ensure that laboratory work is carried out in a safe manner Ensure that the R&D unit complies with relevant statutes. Ensure that knowledge generated is captured in an easily retrievable form Ensure that all data captured in the PLM system Execution of experimental work for the assigned project as per plan. Interpretation of experimental results and propose directions for further work Troubleshoot the problems in process development. Interact with the analytical division for the analysis. Record the experimental observations. Follow safety practices and procedures. Follow the practices and procedures as laid down by statutes. Follow systems for knowledge capture. Follow PLM system and guideline

key position in the world s largest Container shipping company. You will have challenging opportunities to contribute with and develop your A competencies on technically advanced vessels with the best and latest machinery. You will also have the chance to influence and optimize efficiency and procedures in line with increasing empowerment of our vessels. Key responsibilities Perform engine room watch-keeping duties when required Perform work routines in his/her area of responsibility and as directed by the Chief Engineer and/or Second Engineer Maintain generator engines and fuel injection equipment as required by the PMS and as directed by the Chief Engineer and Second Engineer Ensure that the generator engines are well maintained for optimum performance and fuel consumption. Report any breakdown, failure or deviation to the Chief Engineer and Second Engineer Check stock of Generator and fuel injector spare parts to ensure minimum requirements is kept at all times Maintain order and cleanliness in the generator engine room(s) and in other work areas Perform routine and maintenance activities, including breakdown maintenance, as directed by the Chief Engineer and/or Second Engineer Ensure chemicals are used safely and as per Material Safety Data Sheet instruction Instruct and supervise in the use of safety, environmental protection, firefighting and lifesaving equipment Understand the importance of briefing and debriefing to ensure efficient teamwork. Supervision of personnel in his/her charge including: o Orientation. o Health and safety. o Environmental protection. o Use of manuals and procedures. Proper use of tools and equipment. o Standard maintenance and operating practices. Ensure work and rest hour planning is done regularly and requirements are complied with. Bring any challenges in rest hour compliance to the attention of the Second Engineer

About the Role: Actively engage in initial design development of MEP Services and assess constructability of the design. Review legal and statutory compliance of design and follow up on obtaining approvals in time. Co-ordinate with all disciplines of Services Design Ensure Contractors submit shop drawings and obtain approval. Ensure conditions of approvals are implemented at site during execution in a timely and sequential manner. Execute services work as per the drawings, specification in line with schedule and quality. Provide value addition in the selection of vendors & local material supply vendors in line with the agreed procurement process with the Client. Responsible for installation, testing and commissioning of equipment related to all service (Electrical/HVAC/Plumbing ,Firefighting) Manage handovers, ensuring that all works are complete as per vendor contracts, receipt of all relevant documents like manuals and test certificates, as built drawings. Initiate Training to taking over team through Contractor, Consultants About You: B.E BE Electrical/Mech with 8 to 10 years of experience particularly in warehouse / industrial / chemical plant projects. Technical awareness of civil, electro-mechanical, and architectural works Excellent organizational and motivational skills Outstanding attention to detail and observation ability Exceptional communication and interpersonal abilities

A key position in the world s largest Container shipping company. You will have challenging opportunities to contribute with and develop your competencies on technically advanced vessels with the best and latest machinery. You will also have the chance to influence and optimize efficiency and procedures in line with increasing empowerment of our vessels. Key responsibilities Perform engineer room watch-keeping duties when required. Maintenance of all machineries on deck and engine room in his / her area of responsibility as required by the PMS and as directed by Chief Engineer. Management of stores, spares, lube oils and chemicals including monitoring the consumption,inventory management to ensure minimum requirements are met and checking deliveries against advice from suppliers. Duties of Environmental officer as required by ISO 14001 standards including development of objectives and targets, training of other officers and ratings, and record keeping. Maintaining order and cleanliness in the engine room. To instruct and supervise on the vessel in the use of safety, environmental protection, fire fighting, first aid and lifesaving equipment. Preparing and monitoring work plans for other engineers and engine ratings. Periodically monitor the work / rest hour planning for all engineers and engine ratings to ensure that the rest hour requirements are being complied with. Ensure that his / her individual work and rest hour planning is done on an ongoing basis and rest hour requirements are complied with to avoid fatigue. Motivation of engineers and crew, and creation of a safe working environment on board including optimal utilization of resources allocated. Using the least hazardous chemicals and ensuring that chemicals are used in a safe and responsible way Issuing appropriate orders and instructions in a clear and simple manner. Understand the importance of briefing and debriefing to ensure efficient teamwork. Training of supervised personnel which includes: 1. Orientation. 2. Health and safety. 3. Environmental protection. 4. Use of manuals and procedures. 5. Proper use of tools and equipment. 6. Standard maintenance and operating practices. Develop the skills and confidence of the more junior members of the

Experience in Process Industries, oil & gas, chemical, power plant or other similar industries as a Piping engineer, design engineer, project engineer, or similar roles related to Loading arms, Blowers, fans, pumps, turbines, generators or any rotating equipment. Mandatory Skills 4+ Years of Hands-on experience in General Arrangement Drawing (GAD) and engineering BOM release using PLM, large assembly drawings, data sheets and P&ID 3+ years of CAD experience in Inventor and Vault is a must. 2+ years of experience in Piping design, routing and isometric Drawings generation. Experience in interpreting Scope of Work and create a detailed project planning activities Min 2+ year of hands-on experience. Desired skills: Piping selection for LNG & HPNG, refinery, gases and chemical industry is preferred Knowledge of Hydraulic piping and fittings Understanding of API, ATEX, Pressure equipment directives standards Ability to multitask and communicate with cross-functional teams, suppliers, and clients. Good communication skills in English. Knowledge of standards such as API 619, ASME B16.5, Sec 8, Div 1& 2 is desirable.

Ensure safety of self and others including machines, equipment, etc. at office, at customer s place or anywhere as the case may be. Ensure customer s satisfaction by way of providing quality services, good behavior or any other means. Adhere to grooming code and use proper uniform as per company policy. Check your schedule for the day at the commencement of work and attend the jobs as per given time schedule. Ensure proper record keeping by way of documentation or the new systems if any introduced by the company. Ensure SCP is used for all jobs assigned. Select correct preparation & add accurate quantity of preparation by selecting appropriate UOM (Unit of measurement). Generate service leads at every possible opportunity. Keep your bag ready with correct working equipment and chemical / material for the day s job. Ensure proper behavior, discipline while on duty at the office, at customer s place or anywhere as the case may be. Reporting at customers premises in time in a presentable manner. Introduce yourself and present your identity card after greetings. Inspect the premises that are to be treated for the pest problems being faced by the customer. Deliver the service as per findings of the inspection, training given as per our PMP and as per instruction given by OE. Ensure proper & optimum usage of chemicals issued, reduce wastage and avoid misuse of the same. Clean the premises if service generates any residue like dust and spillages. Inform customers about Do s and Don ts about pest and pest prevention measures. Obtain a job completion signature from customers before leaving Record chemicals consumed for the respective service / job wise. Maintain (minor repairing) own equipment and ensure cleanliness of the same. Use proper PPEs as recommended per type of job. Handle chemicals as per safety policy. Strictly adhere to the safety instructions wherever given. Help in BTL activity while on the job. Reporting any new developments / changes found in the market and any other related information on Pest Management during regular or monthly operations meetings. Ensure carrying of Inspect-kit and use them at appropriate places. Do not take alcohol, prohibited drugs, pan, gutka etc. and do not smoke while on duty.

Ensure safety of self and others including machines, equipment, etc. at office, at customer s place or anywhere as the case may be. Ensure customer s satisfaction by way of providing quality services, good behavior or any other means. Adhere to grooming code and use proper uniform as per company policy. Check your schedule for the day at the commencement of work and attend the jobs as per given time schedule. Ensure proper record keeping by way of documentation or the new systems if any introduced by the company. Ensure SCP is used for all jobs assigned. Select correct preparation & add accurate quantity of preparation by selecting appropriate UOM (Unit of measurement). Generate service leads at every possible opportunity. Keep your bag ready with correct working equipment and chemical / material for the day s job. Ensure proper behavior, discipline while on duty at the office, at customer s place or anywhere as the case may be. Reporting at customers premises in time in a presentable manner. Introduce yourself and present your identity card after greetings. Inspect the premises that are to be treated for the pest problems being faced by the customer. Deliver the service as per findings of the inspection, training given as per our PMP and as per instruction given by OE. Ensure proper & optimum usage of chemicals issued, reduce wastage and avoid misuse of the same. Clean the premises if service generates any residue like dust and spillages. Inform customers about Do s and Don ts about pest and pest prevention measures. Obtain a job completion signature from customers before leaving Record chemicals consumed for the respective service / job wise. Maintain (minor repairing) own equipment and ensure cleanliness of the same. Use proper PPEs as recommended per type of job. Handle chemicals as per safety policy. Strictly adhere to the safety instructions wherever given. Help in BTL activity while on the job. Reporting any new developments / changes found in the market and any other related information on Pest Management during regular or monthly operations meetings. Ensure carrying of Inspect-kit and use them at appropriate places. Do not take alcohol, prohibited drugs, pan, gutka etc. and do not smoke while on duty.

- Growing business through the development of new leads and new contacts - Building business relationships with current and potential clients - Attending networking events to attract and retain clients - Developing and executing sales and marketing strategies to grow business - Oversee the sales process to attract new clients. - Work with technical, dispatch, Manufacturing, accounting team members to identify and manage sales activity on time. - Maintain fruitful relationships with clients and address their needs effectively. - Research and identify new market opportunities. - Prepare CRF for new projects and follow-up this new projects with technical and clients. - Maintain and track fresh desk tickets for any projects ongoing with existing and new clients. - Foster a collaborative environment within the organization. - Developing and executing sales plans to meet and exceed monthly and quarterly sales goals - Maintaining and updating sales, marketing and business development documentation - Assisting with marketing and promotional projects - Collaborating with management on sales goals - Support the team with other responsibilities as required - Identifying new revenue opportunities

Work on Automation and semi Automation of plants and equipment’s. Siemens PLC programming. Wincc, Tia Portal, S-1200, S-1400. Should handle projects like water, beverage, chemical, ETP, Distilleries, Milk, Juice, ethanol, oil, etc. Required Candidate profile PLC & SCADA program development as per process requirement. Cold loop & and hot loop testing of PLC & MCC panel, Ready to travel Perks and benefits Alt Saturday Off, Overall Allowances for Traveling

Operate and monitor washing, dry cleaning, and drying machinery, including adding chemicals and cleaning lint traps. Identify stained or damaged items and determine status for repair, spot treatment, rewash, or discard. Inspect cleanliness of articles removed from the washer, dryer, or dry-cleaning machines and place in clean linen carts. Set dryers to designated times and temperatures based on fabrics contained in load. Remove lint and debris from dryer screens, dry cleaning filters, and drain trap after each load. Fold cleaned articles into designated size, either by hand or using folding machine. Maintain accurate records of items laundered. Follow all company safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors. PREFERRED QUALIFICATIONS Education: No high school diploma or G.E.D. equivalent. Related Work Experience: No related work experience. Supervisory Experience: No supervisory experience. License or Certification: None .

Select how often (in days) to receive an alert: Select how often (in days) to receive an alert: Senior Executive - Process Kandla, GJ, IN, 370140 State : Gujar t (IN-GJ) Country : India (IN) Requisition Number : 41105 Role Purpose Statement: To Maintain to shift activity for edible oil refinery, Hydrogenation and fractionation plant operation. To reduce repairs & maintenance cost. Maintain Safety frequency & severity Index as per Company Target. To maintain consumption of utilities, chemical & manpower as per the budgeted figures. To reduce variable cost at processing centers refinery / boiler house against budgeted nos. To increase the efficiency of each section by better output and reduced down time. To improve process activities by adopting Kaizen in the work area. Daily MIS report generation. Review refinery standards and process optimization. Bakery blend making & Tank farm operation. SAP knowledge & 5S trained. Knowledge and Skills: Continious Improvement Good team Coordinaiton Technical: Soya and palm oil processing, fractination, Hydrogenation, Chemical Interestrification, Multi stock D.O, Separators, Acid Oil and Knowledge of SAP preferable. Knowledge of R&M, FSSAI, Inventory Management, Manpower Management, Legal Compliances etc. B.Tech in oil technology/ Chemical engineering 5+ years in Edible oil Refinery Chemical Engineer, Refinery, Sustainable Agriculture, Engineer, HVAC, Engineering, Energy, Agriculture, Operations

Role Summary: As a Field Service Rep, you are responsible for coordinating with customers in field issues, warranty complaints and resolutions. You will carry out and support site commissioning, service and repair jobs at customer sites. This position will be based at Vadodara QRC. Responsibilities: Perform in-house and on-site repairs and service activities Assess mechanical problems and take actions to resolve promptly. Work side-by-side with our customer s personnel as required. Oversee the full cycle of repair: disassembly, cleaning, inspection, repair, and assembly. Ensure that equipment is installed successfully and on schedule. Check equipment prior to start-up and assess start-up performance. Monitor the maintenance and performance of Flowserve equipment. Train customers in the proper procedures for operating and maintaining Flowserve products. Collaborate effectively with the supporting organizations of Flowserve, including the customer service, and sales engineering. Maintain and submit organized, accurate records, including daily reports, jobs quoted, jobs performed, and time and materials charged. Knowledgeable about the industrial applications and operations of pumps, turbines, compressors, seals, actuators, or any rotary equipment. Other duties as assigned. Requirements: Mechanical/Production Engineer with 5-7 years of relevant experience Experience with installing, maintaining mechanical equipment Experience with repairing pump equipment, installing mechanical seals Proven ability to correctly read and interpret blueprints, engineering drawings, and schematics Must be a self-starter with good follow-through, capable of working independently with little supervision Proficiency in Outlook, Word, and Excel Able to travel throughout India Able to work overtime as required to minimize impact on customers Physical activity is required, including frequent lifting up to 50 pounds / 25kg, ascending/descending ladders and staircases, and climbing and reaching in, under, and around large equipment, often outside year-round. Preferred Experience / Skills: Strong verbal and written communication skills Proficient in Microsoft Office, including Word Able to work well with a team Knowledge of AutoCAD, Solid Works or any technical drawing tools are a plus Experience serving customers in oil & gas, power, chemical, water and other general industries Willingness to travel as needed to customer sites

Designation: International Marketing Executive Qualification:B.Com, BBA or any Graduate Experience: 1 to 7 Years CTC: 30k to 60 k Location: satelite , Ahmedabdad Industry: Pharma,chemical, API Required Candidate profile Candidate must have experience in international marketing, selling or business development

Understanding of the Hydrogen value chain and market; identifying and understanding key technology, cost, demand and production trends domestically and globally; business planning, development of business roadmap, customer profiling, customer requirements, interactions with potential customers; attending various conferences, webinars, talking to various people in Hydrogen sector; etc. Major Accountabilities: To track latest industry developments in New Energies sector To gather information from news articles, research papers, analyst reports; synthesize and present this information in a cohesive way To attend various webinars, conferences and share key learnings To skim through literature and undertake secondary research to better understand technology, risk and other project related aspects To derive key insights/findings from various ongoing work streams and present the essence of the matter in a short and cohesive way To think through and present key takeaways on various business strategy activities To collate, synthesize and circulate newsletters on new energies industry developments To monitor raw material and finished goods prices on a timely basis

Understanding of the Hydrogen value chain and market; identifying and understanding key technology, cost, demand and production trends domestically and globally; business planning, development of business roadmap, customer profiling, customer requirements, interactions with potential customers; attending various conferences, webinars, talking to various people in Hydrogen sector; etc. Major Accountabilities: To track latest industry developments in New Energies sector To gather information from news articles, research papers, analyst reports; synthesize and present this information in a cohesive way To attend various webinars, conferences and share key learnings To skim through literature and undertake secondary research to better understand technology, risk and other project related aspects To derive key insights/findings from various ongoing work streams and present the essence of the matter in a short and cohesive way To think through and present key takeaways on various business strategy activities To collate, synthesize and circulate newsletters on new energies industry developments To monitor raw material and finished goods prices on a timely basis

Understanding of the Hydrogen value chain and market; identifying and understanding key technology, cost, demand and production trends domestically and globally; business planning, development of business roadmap, customer profiling, customer requirements, interactions with potential customers; attending various conferences, webinars, talking to various people in Hydrogen sector; etc. Major Accountabilities: To track latest industry developments in New Energies sector To gather information from news articles, research papers, analyst reports; synthesize and present this information in a cohesive way To attend various webinars, conferences and share key learnings To skim through literature and undertake secondary research to better understand technology, risk and other project related aspects To derive key insights/findings from various ongoing work streams and present the essence of the matter in a short and cohesive way To think through and present key takeaways on various business strategy activities To collate, synthesize and circulate newsletters on new energies industry developments To monitor raw material and finished goods prices on a timely basis

Understanding of the Hydrogen value chain and market; identifying and understanding key technology, cost, demand and production trends domestically and globally; business planning, development of business roadmap, customer profiling, customer requirements, interactions with potential customers; attending various conferences, webinars, talking to various people in Hydrogen sector; etc. Major Accountabilities: To track latest industry developments in New Energies sector To gather information from news articles, research papers, analyst reports; synthesize and present this information in a cohesive way To attend various webinars, conferences and share key learnings To skim through literature and undertake secondary research to better understand technology, risk and other project related aspects To derive key insights/findings from various ongoing work streams and present the essence of the matter in a short and cohesive way To think through and present key takeaways on various business strategy activities To collate, synthesize and circulate newsletters on new energies industry developments To monitor raw material and finished goods prices on a timely basis

A Manager of Health, Safety, Environment, and Sustainability (HSEF) is a senior-level role within an organization responsible for overseeing and managing health, safety, environmental, and sustainability initiatives This role plays a critical part in creating and maintaining a safe and sustainable work environment while ensuring compliance with relevant regulations Here's an overview of the responsibilities and qualifications associated with the role of a Manager of HSEF: Role Overview: HSEF Strategy: Develop, implement, and communicate the organization's health, safety, environmental, and sustainability strategies and policies Compliance: Ensure that the organization complies with all relevant health, safety, environmental, and sustainability regulations, standards, and laws Risk Assessment: Conduct risk assessments to identify potential hazards and environmental impacts within the workplace and develop strategies to mitigate them Incident Management: Manage and investigate incidents, accidents, and near-miss events Develop action plans to prevent recurrence Safety Training: Develop and implement safety training programs for employees to promote safe practices and behaviors Environmental Management: Oversee environmental programs, including waste management, emissions reduction, and sustainability initiatives such as energy conservation and carbon footprint reduction Health and Wellness: Promote employee health and wellness programs, including ergonomic assessments and mental health support Emergency Preparedness: Develop and maintain emergency response and evacuation plans to ensure employee safety during emergencies

We are actively looking for credible team members who would be primarily responsible for: To understand experimental technique, require for the carrying out the experimental work in the laboratory. Knowledge of using laboratory equipment. Understanding of chemical hazards and compatibility. Knowledge of new experimental process as per finalize procedure. To understand the laboratory process of said experiment. Execution of laboratory documentation in RD. Essential Knowledge and understanding of laboratory technique. Knowledge and handling of Laboratory instruments like overhead stirrer, heating mental, oil bath etc. Understanding and handling of synthesis laboratory practices. Basic knowledge of SAP- module Basic knowledge of ISO 9001, ISO 14001 and OHSAS 18001 Management systems Educational Requirements: M.Sc. Organic Chemistry Experience required: Minimum 3-5 Years of experience in handling of Research laboratory in chemical field.

We are actively looking for credible team members who would be primarily responsible for: To understand experimental technique, require for the carrying out the experimental work in the laboratory. Knowledge of using laboratory equipment. Understanding of chemical hazards and compatibility. Knowledge of new experimental process as per finalize procedure. To understand the laboratory process of said experiment. Execution of laboratory documentation in RD. Essential Knowledge and understanding of laboratory technique. Knowledge and handling of Laboratory instruments like overhead stirrer, heating mental, oil bath etc. Understanding and handling of synthesis laboratory practices. Basic knowledge of SAP- module Basic knowledge of ISO 9001, ISO 14001 and OHSAS 18001 Management systems Educational Requirements: M.Sc. Organic Chemistry Experience required: Minimum 3-5 Years of experience in handling of Research laboratory in chemical field.

We are actively looking for credible team members who would be primarily responsible for: To understand experimental technique, require for the carrying out the experimental work in the laboratory. Knowledge of using laboratory equipment. Understanding of chemical hazards and compatibility. Knowledge of new experimental process as per finalize procedure. To understand the laboratory process of said experiment. Execution of laboratory documentation in RD. Essential Knowledge and understanding of laboratory technique. Knowledge and handling of Laboratory instruments like overhead stirrer, heating mental, oil bath etc. Understanding and handling of synthesis laboratory practices. Basic knowledge of SAP- module Basic knowledge of ISO 9001, ISO 14001 and OHSAS 18001 Management systems Educational Requirements: M.Sc. Organic Chemistry Experience required: Minimum 3-5 Years of experience in handling of Research laboratory in chemical field.

We are actively looking for credible team members who would be primarily responsible for: To understand experimental technique, require for the carrying out the experimental work in the laboratory. Knowledge of using laboratory equipment. Understanding of chemical hazards and compatibility. Knowledge of new experimental process as per finalize procedure. To understand the laboratory process of said experiment. Execution of laboratory documentation in RD. Essential Knowledge and understanding of laboratory technique. Knowledge and handling of Laboratory instruments like overhead stirrer, heating mental, oil bath etc. Understanding and handling of synthesis laboratory practices. Basic knowledge of SAP- module Basic knowledge of ISO 9001, ISO 14001 and OHSAS 18001 Management systems Educational Requirements: M.Sc. Organic Chemistry Experience required: Minimum 3-5 Years of experience in handling of Research laboratory in chemical field.

A Manager of Health, Safety, Environment, and Sustainability (HSEF) is a senior-level role within an organization responsible for overseeing and managing health, safety, environmental, and sustainability initiatives This role plays a critical part in creating and maintaining a safe and sustainable work environment while ensuring compliance with relevant regulations Here's an overview of the responsibilities and qualifications associated with the role of a Manager of HSEF: Role Overview: HSEF Strategy: Develop, implement, and communicate the organization's health, safety, environmental, and sustainability strategies and policies Compliance: Ensure that the organization complies with all relevant health, safety, environmental, and sustainability regulations, standards, and laws Risk Assessment: Conduct risk assessments to identify potential hazards and environmental impacts within the workplace and develop strategies to mitigate them Incident Management: Manage and investigate incidents, accidents, and near-miss events Develop action plans to prevent recurrence Safety Training: Develop and implement safety training programs for employees to promote safe practices and behaviors Environmental Management: Oversee environmental programs, including waste management, emissions reduction, and sustainability initiatives such as energy conservation and carbon footprint reduction Health and Wellness: Promote employee health and wellness programs, including ergonomic assessments and mental health support Emergency Preparedness: Develop and maintain emergency response and evacuation plans to ensure employee safety during emergencies

Candidate should be proficient in Piping Materials with experience in engineering consultancy on industrial design projects like chemical, pharmaceutical, bulk drugs, etc. Comprehension of client / project requirements for timely completion and submission of project deliveries. Possess good knowledge of Codes like ASME B31.3, ASME B31.12, ASME B31.1, related ASTM / API / BS standards and application of these requirements in projects. Possess good knowledge of piping material selection and developing piping service class index in consultation with process engineer. Preparation of Piping specifications for metallic piping, non-metallic piping and lined piping Preparation of Pipe wall thickness calculations including external pressure calculation, branch chart calculations and line blanks. Development of project standards, technical specifications for piping materials with minimum supervision. Preparation of Valve Material Specifications Preparation of datasheets for all piping special items like special valves, strainers, traps, sight glass, bellows, hoses, etc. Preparation of RFQs for piping bulk items, valves, specialty items, etc Carrying out technical evaluation of vendor offers against RFQs for all piping material; preparation of both technical evaluation and commercial comparison; Preparation of technical bid study reports for valves, piping specialties, etc. Check and review vendor documents & drawings for valves & piping specialties. Assisting in all interfacing, engineering, and construction groups in the area of piping material. Able to resolve all piping material related issues in project. Advising on all technical deviations of piping material proposed by vendors, site contractors. Identifying deviations in job scope and estimating magnitude of changes Assuring that quality control procedures are adhered for the assigned work. Ensuring smooth communication flow, both verbal and written, is maintained within Piping Engineering and other design, engineering, and purchasing disciplines. Extraction and handling Piping MTO for the project. Preparation of Cost estimation for Piping bought items as well as for construction related activities like Equipment Erection, Piping fabrication - erection works, thermal insulation & Painting works. Preparation of Technical specifications for Equipment erection, Piping fabrication Works Preparation of Piping MTO & Inch Dia / Inch Metre reports Preparation of Technical specifications for Thermal Insulation & Painting Works Estimation of Insulation & Painting Bill of Material. Candidate Specification: Qualified BE / ME in Mechanical from a reputed university / institute Experience in Engineering Consultancy firms, with Chemical Industry / Pharmaceutical Industry background. Knowledge of software such as AutoCAD, MS Office Should be dedicated and with good problem-solving ability. Should have high work ethics and act responsibly. Should be flexible or adaptable to change. Should be a resourceful team player with good communication and inter-personal skills, analytical understanding and visualization skills. Should be able to learn new procedures quickly and an develop new systems as required. Role: Construction Engineering - Other Industry Type: Engineering & Construction Department: Construction & Site Engineering Employment Type: Full Time, Permanent Role Category: Construction Engineering Education UG: Any Graduate PG: Any Postgraduate

In fast changing markets, customers worldwide rely on Thales. Thales is a business where brilliant people from all over the world come together to share ideas and inspire each other. In aerospace, transportation, defence, security and space, our architects design innovative solutions that make our tomorrows possible. Experience: 3yrs-6yrs Technical skills : Experience competence in metallic or non-metallic materials, composites and chemical products. Experience with international materials and processes standards (ISO, EN, MIL ). Experience in environmental regulations like REACh or RoHS regulations applicable to chemical products, electronic and mechanical components. Competences in Excel (pivot table, vertical search ). Knowledge in a field of database and management of huge volume of parts would be advantageous. Python Programming Job responsibilities will include: Controlling and validating environmental data collection and maintenance on all types of components in the corporate database Controlling and validating data on chemical mixtures. Querying/Surveying components manufacturers for data collection Performing data consolidations and communicating summary results Analyzing obsolescence risks of the chemical components You will be responsible for commitment in terms of deadlines, high quality and reliability