18 Cfbc Jobs

Responsibilities: * Collaborate with project team on site planning execution and erection Erection. * Ensure compliance with safety standards during erection process. * Oversee boiler installation at thermal power plants. Provident fund Health insurance Annual bonus Office cab/shuttle

Responsibilities: * Collaborate with project team on site planning execution and erection Erection. * Ensure compliance with safety standards during erection process. * Oversee boiler installation at thermal power plants. Provident fund Health insurance Annual bonus Office cab/shuttle

Operate, monitor, and troubleshoot plant systems through the Distributed Control System Analyze mechanical system data from DCS to identify trends, anomalies, or performance issues.

Role & responsibilities : The 2nd Class Boiler Operator is responsible for the safe and efficient operation, maintenance, and monitoring of steam boilers and associated systems in a chemical manufacturing environment. The role ensures uninterrupted steam supply to critical plant processes, while adhering to safety and environmental compliance standards. Key Responsibilities: Operate, monitor, and maintain high-pressure boilers, feedwater systems, and auxiliary equipment. Perform routine inspections and log boiler performance data (e.g., pressure, temperature, fuel consumption). Maintain proper water treatment levels, blowdowns, and chemical dosing to prevent scale and corrosion. Respond promptly to alarms and emergencies; conduct troubleshooting and corrective actions. Start-up and shut-down boiler systems following standard operating procedures (SOPs). Report any irregularities or mechanical issues to maintenance and supervisors. Ensure compliance with all statutory requirements including safety, emissions, and boiler codes. Coordinate with process departments for steam demand requirements. Assist in maintenance and minor repairs of boiler and utility systems. Maintain cleanliness and housekeeping in the boiler room and surrounding areas. Qualifications and Experience: Certification: Valid 2nd Class Boiler Attendant Certificate issued by the appropriate boiler inspectorate. Experience: Minimum 25 years in boiler operation, preferably in the chemicals or similar process industry. Knowledge: Strong understanding of steam systems and boiler operations. Familiar with chemical plant safety procedures (HAZOP, MSDS, etc.). Basic knowledge of mechanical and instrumentation systems. Key Skills: Attention to detail and safety consciousness Basic troubleshooting and analytical skills Teamwork and communication Ability to follow SOPs and operational guidelines Familiarity with SCADA/PLC systems is an advantage Working Conditions: Rotating shifts (including nights and weekends) Exposure to high temperature, noise, and chemical environments PPE compliance mandatory at all times JOB LOCATION : KHARAGPUR

Role & responsibilities : The 2nd Class Boiler Operator is responsible for the safe and efficient operation, maintenance, and monitoring of steam boilers and associated systems in a chemical manufacturing environment. The role ensures uninterrupted steam supply to critical plant processes, while adhering to safety and environmental compliance standards. Key Responsibilities: Operate, monitor, and maintain high-pressure boilers, feedwater systems, and auxiliary equipment. Perform routine inspections and log boiler performance data (e.g., pressure, temperature, fuel consumption). Maintain proper water treatment levels, blowdowns, and chemical dosing to prevent scale and corrosion. Respond promptly to alarms and emergencies; conduct troubleshooting and corrective actions. Start-up and shut-down boiler systems following standard operating procedures (SOPs). Report any irregularities or mechanical issues to maintenance and supervisors. Ensure compliance with all statutory requirements including safety, emissions, and boiler codes. Coordinate with process departments for steam demand requirements. Assist in maintenance and minor repairs of boiler and utility systems. Maintain cleanliness and housekeeping in the boiler room and surrounding areas. Qualifications and Experience: Certification: Valid 2nd Class Boiler Attendant Certificate issued by the appropriate boiler inspectorate. Experience: Minimum 2-5 years in boiler operation, preferably in the chemicals or similar process industry. Knowledge: Strong understanding of steam systems and boiler operations. Familiar with chemical plant safety procedures (HAZOP, MSDS, etc.). Basic knowledge of mechanical and instrumentation systems. Key Skills: Attention to detail and safety consciousness Basic troubleshooting and analytical skills Teamwork and communication Ability to follow SOPs and operational guidelines Familiarity with SCADA/PLC systems is an advantage Working Conditions: Rotating shifts (including nights and weekends) Exposure to high temperature, noise, and chemical environments PPE compliance mandatory at all times JOB LOCATION : KHARAGPUR

Ability to handle all operational activities in boiler, turbine and related auxiliaries. Cold, warm, hot, extreme hot startup, shutdown and emergancy handling of unit with SOP's

Role & responsibilities Perform boiler operation from field and adjust operational parameters to maintain desired output and safety levels. Conduct regular inspections and troubleshooting to ensure optimal performance and reliability of boiler operations. Collaborate with maintenance teams to address repairs and modifications. Maintain accurate records of boiler field operations. Take appropriate actions as per instructions of Panel Operator and Shift in charge in case of emergency. Startup / Shutdown as per operating procedures.

Operate, monitor, and troubleshoot plant systems through the Distributed Control System Analyze mechanical system data from DCS to identify trends, anomalies, or performance issues.

Job Overview: We are seeking a qualified and experienced Power Plant Engineer to join our team. The ideal candidate will have a B.E/B.Tech degree and substantial hands-on experience in a 500 MW or similar capacity power plant. You will be responsible for ensuring disciplined operations, maintaining safety standards, and optimizing productivity while managing quality, time, and costs. Key Responsibilities: Operational Management: Oversee the on and off-shift operations of various boiler systems, including CFBC and AFBC units, ensuring compliance with standard operating procedures. Facilitate Operations & Maintenance (O&M) activities using protocols such as work permit systems, positive isolation, and ESI/ENSAFE safety measures. Safety Compliance: Ensure adherence to safety protocols related to protections and interlocks for both boilers and turbines. Conduct monthly safety meetings and daily toolbox talks to promote a culture of safety and enhance 5S standards. Equipment Management: Troubleshoot issues related to turbines and boilers, effectively resolving problems that cause tripping with relevant departments. Prepare boilers for light-up, hydraulic tests, and ensure safe startup/shutdown of the thermal power plant. Emergency Response: Manage emergencies such as blackouts, turbine trips, and boiler trips, ensuring swift resolution. Project Operations: Handle complete project operations, including planning, resource utilization, operation, maintenance, and manpower management. Coordinate with various departments to ensure smooth operations and job distribution. Performance Analysis: Analyze generation reports and prepare follow-up schedules during plant shutdowns. Monitor and optimize the performance of parallel operation controls for multiple generation units. Construction Planning: Oversee utility gallery construction planning, cable gallery erection, and installation of utility gas and water supply lines. Manage the lifting schemes, manpower distribution, and job alignment with vendor workforces. Documentation and Reporting: Prepare and maintain operational documentation, including fault analysis and job reports. Qualifications: Bachelors degree in Engineering (B.E/B.Tech) in Mechanical, Electrical, or related field. Minimum 6 to 16 years of experience in power plant operations or maintenance, specifically in a 500 MW or similar capacity facility. Strong understanding of power generation processes, equipment, and systems. Familiarity with safety regulations and best practices in power plant operations. Proficiency in relevant engineering software and tools. Excellent problem-solving skills and ability to work under pressure. Strong communication and teamwork abilities.

Role & responsibilities Manage the operations of boiler from DCS control panels. Monitor control panel data and alarms, taking corrective actions as needed to maintain safe and efficient operations. Startup / Shutdown as per operating procedures. Instruct and interact clearly with field operators for making necessary changes in the field and co-ordinate with shift engineer, and for proper line up and related safety aspects. Record boiler parameters and other necessary data. Provide back up to turbine field officer on Turbine DCS when turbine field officer is on field round. Preferred candidate profile Knowledge of boiler DCS operation. Knowledge of CFBC Boiler. Knowledge of boiler parameters, interlocks, water chemistry, etc. Knowledge of equipment startup/ shutdown, maintenance and troubleshooting. Knowledge of turbine interlocks.

Job Overview: We are seeking a qualified and experienced Power Plant Engineer to join our team. The ideal candidate will have a B.E/B.Tech degree and substantial hands-on experience in a 500 MW or similar capacity power plant. You will be responsible for ensuring disciplined operations, maintaining safety standards, and optimizing productivity while managing quality, time, and costs. Key Responsibilities: Operational Management: Oversee the on and off-shift operations of various boiler systems, including CFBC and AFBC units, ensuring compliance with standard operating procedures. Facilitate Operations & Maintenance (O&M) activities using protocols such as work permit systems, positive isolation, and ESI/ENSAFE safety measures. Safety Compliance: Ensure adherence to safety protocols related to protections and interlocks for both boilers and turbines. Conduct monthly safety meetings and daily toolbox talks to promote a culture of safety and enhance 5S standards. Equipment Management: Troubleshoot issues related to turbines and boilers, effectively resolving problems that cause tripping with relevant departments. Prepare boilers for light-up, hydraulic tests, and ensure safe startup/shutdown of the thermal power plant. Emergency Response: Manage emergencies such as blackouts, turbine trips, and boiler trips, ensuring swift resolution. Project Operations: Handle complete project operations, including planning, resource utilization, operation, maintenance, and manpower management. Coordinate with various departments to ensure smooth operations and job distribution. Performance Analysis: Analyze generation reports and prepare follow-up schedules during plant shutdowns. Monitor and optimize the performance of parallel operation controls for multiple generation units. Construction Planning: Oversee utility gallery construction planning, cable gallery erection, and installation of utility gas and water supply lines. Manage the lifting schemes, manpower distribution, and job alignment with vendor workforces. Documentation and Reporting: Prepare and maintain operational documentation, including fault analysis and job reports. Qualifications: Bachelors degree in Engineering (B.E/B.Tech) in Mechanical, Electrical, or related field. Minimum 6 to 16 years of experience in power plant operations or maintenance, specifically in a 500 MW or similar capacity facility. Strong understanding of power generation processes, equipment, and systems. Familiarity with safety regulations and best practices in power plant operations. Proficiency in relevant engineering software and tools. Excellent problem-solving skills and ability to work under pressure. Strong communication and teamwork abilities.

To coordinate shift activity of all power plants comprising of AFBC, WHRB & TFH boilers and 12 MW turbine along with oil & gas fired DG sets and their auxiliaries. monitor performance of unit, analyse deviation for correction, maintain plant efficiency levels, achieving operational excellence in order to maintain uninterrupted power supply to smelter. To implement HSE standard at site and implement SOPs. To handle operational emergencies. Achieving monthly, quarterly and annual targets for power generation through daily monitoring of shift operations Conducting daily plant performance review and analysis with respect to performance indicators such as Plant Heat Rate (PHR), Auxiliary Power Consumption (APC), specific water consumption, specific oil consumption and Non-Coal Cost (NCC) through and implementing Corrective and Preventive Action (CAPA) Implementing all SOPs related to operations of Turbines, Boilers, and auxiliaries Managing waste disposal Maintaining stipulated ash levels in the ash silos by evacuation through operation Ensuring hopper evacuation, bottom ash and fly ash conveying system availability, transportation of ash Controlling resource wastage and improving plant efficiency by monitoring defects notified by shift engineers and correcting the same. Plant emergency handling Islanding operations of unit, black out restoration and revival of unit Maintenance Facilitating availability and reliability of all equipment by partnering maintenance teams in implementation of shutdown, preventive, predictive schedules and breakdown maintenance activities. Giving inputs for planning and budgeting with respect to all technical up gradation and maintenance for the next financial year and implementing budget through meticulous planning of daily operations. Achieving cost saving without compromising delivery by driving continuous process improvement across area of operation. Implementing Safety & Sustainability standards and developing safety mechanism to achieve zero reported incident.

We have been mandated by a large global conglomerate in metal & mines business Position: Manager - Power Plant Project (Mechanical) Experience : 10+ Years Location: Chaliyama Educational Qualification- Diploma / B.Tech /B.E in Mechanical Engineering Job Purpose: The Incumbent will manage all mechanical aspects of the 35MW captive power plant project, including planning, execution, installation, commissioning, and handover, ensuring timely delivery, quality standards, and compliance with regulatory requirements. Key Responsibilities : Project : Lead the mechanical project planning and execution for the captive power plant. Prepare detailed project schedules, work breakdown structures, and resource allocation for mechanical works. Coordinate with consultants, vendors, contractors, and internal teams for timely project execution. Review mechanical designs and drawings to ensure compliance with project specifications and standards. Oversee the procurement of mechanical equipment and materials in coordination with the purchase team. Supervise erection, installation, alignment, and commissioning of mechanical systems such as cfbc, whrb, turbines, pumps, compressors, piping, cooling towers, and other balance of plant (BoP) systems. Ensure all mechanical installations meet design intent and quality standards. Troubleshoot technical issues during installation and commissioning phases. Team Management & Coordination: Manage and mentor mechanical engineers, supervisors, and contractors involved in project activities. Coordinate with electrical, civil, and instrumentation teams to ensure project integration. Documentation & Reporting: Prepare and present regular project updates, progress reports, and risk assessments to senior management. Maintain complete documentation of mechanical systems, tests, and commissioning records. Experience: 10+ years of experience in mechanical project execution in the power or energy sector, with at least 5 years in captive power projects. Strong understanding of mechanical equipment used in power plants (cfbc, wrhb, turbines) Proficiency in reading and interpreting P&IDs, GA drawings, and engineering documents Experience in greenfield or brownfield captive power plant projects Hands-on involvement in erection and commissioning of major power plant equipment Knowledge of energy efficiency, reliability, and cost control practices in power Plant Project.

Position - Boiler Commissioning Experience - 10 - 20 Years Education - B.Tech Mechanical Must have Experience for Boiler commissioning like CFBC and Oil & Gas Fired Boilers Location - Site (Pan India).

- Able to handle O&M Projects across India - Able to provide the manpower as and when required - New mobilizations and client handling - Should have knowledge about the AHP, CHP , BTG - Manpower arrangement and recruitment - Shutdown Planning

Key Responsibilities: Boiler Operations: Operate, monitor, and control boiler systems through the Distributed Control System (DCS) to ensure smooth and efficient performance. System Monitoring: Continuously monitor boiler parameters such as pressure, temperature, fuel consumption, and alarms to identify and address any deviations. Troubleshooting: Diagnose and resolve technical issues, ensuring minimal downtime and optimal performance of the boiler systems. Start-Up and Shutdown: Execute safe start-up and shutdown procedures for boilers, adhering to established guidelines and protocols. Having knowledge about power operations especially Boiler Operations.

Having knowledge about power operations especially turbine operations Key Responsibilities: Turbine Operations: Operate and monitor turbine equipment and auxiliary systems through the DCS panel to maintain optimal performance. Monitoring: Continuously observe and analyze plant parameters, alarms, and trends to ensure smooth and efficient turbine operation. Troubleshooting: Identify abnormalities or operational issues, take corrective actions, and report deviations to the shift supervisor/manager. Start-Up and Shutdown: Execute safe start-up, shutdown, and emergency operations of turbine systems in accordance with standard operating procedures.

Engineer / Senior Engineer - Power Plant.. ABG85505 Chemicals Gujarat Posted On 22 Apr 2025 End Date 06 May 2025 Required Experience 4 - 7 years ShareApply Basic Section No. Of Position 1 Grade 11 Level Engineer Organisational BUSINESS Chemicals BUSINESS_UNIT-1 Grasim Chlor Alkali BUSINESS_UNIT-2 GCA - Veraval BUSINESS_UNIT-3 GCA - Veraval DEPARTMENT-1 Power Plant (I) Country India State Gujarat Worksite IR, Veraval Industry Power & Energy Function Engg, Main & Utility Services Skills Skill Instrumentation DCS PLC Troubleshooting Familiarity with ISO Standards PSM Instrument Control Electronic Instrumentation Minimum Qualification Bachelor Of Engineering Bachelor Of Technology CERTIFICATION No data available About The Role Working experience in the maintenance and troubleshooting of DCS / PLC systems , including Honeywell EPKS C200 and Emerson OCR-1100 platforms. Hands-on experience with Continuous Emission Monitoring Systems (SOx-NOx, SPM analyzers) ensuring accurate emissions monitoring and environmental compliance. Skilled in managing field instrumentation such as pH, Conductivity, Silica analyzers, control valves, switches, and SMART transmitters (Emerson/Yokogawa). Strong background in Turbine Governing System , including Woodward systems, and vibration monitoring using Bently Nevada/ Shinkawa systems. Specialized in CFBC Boiler and Steam Turbine Generator (STG) instrumentation maintenance and performance optimization. Proficient in preventive, shutdown, and breakdown maintenance planning, ensuring minimal downtime and maximum equipment reliability. Experienced in inventory management, spare parts planning , and maintenance budget execution for cost-effective operations. Competent in SAP for maintenance documentation and workflow tracking; skilled in MS Office for reporting and analysis. In-depth understanding of ISO standards , WPM (Work Permit Management) , and PSM (Process Safety Management) for safe and compliant plant operations. Adept at working in cross-functional teams, ensuring high standards of operational efficiency, safety, and regulatory compliance