Welder/Fabricator/molder

1. Molding & Fabrication

o Carry out molding, lamination, and finishing of FRP (Fiber Reinforced

Plastic) products as per design, drawing, or instructions.

o Prepare molds, apply release agents, and lay-up FRP materials (resin,

fiberglass mat, woven roving, etc.) as required.

o Ensure proper curing, trimming, drilling, and finishing of molded components.

2. Material Handling

o Handle and mix resins, catalysts, and other chemicals with accuracy and

safety.

o Ensure correct ratios and techniques are followed to maintain product strength

and durability.

3. Quality Assurance

o Inspect finished products for surface finish, dimensions, and defects.

o Perform necessary touch-ups, repairs, or reinforcements.

o Follow quality standards and report deviations.

4. Maintenance & Housekeeping

o Maintain cleanliness of tools, molds, and work area.

o Carry out basic maintenance of FRP equipment and tools.

5. Health & Safety

o Follow all safety protocols while handling resins, catalysts, and cutting tools.

o Use PPE (gloves, masks, safety glasses, etc.) as per company standards.

o Ensure safe disposal of FRP waste and chemicals.

Skills & Competencies Required:

 Knowledge of FRP molding, lamination, and finishing techniques.

 Understanding of resin systems, curing times, and chemical safety.

 Ability to read and follow technical drawings and work instructions.

 Attention to detail and commitment to quality.

 Physical fitness to handle manual fabrication work.

Work Conditions:

 Workshop / site-based role, exposure to chemicals and dust.

 Requires use of PPE at all times.

 May involve overtime based on project deadlines.

1. Fabrication & Assembly

o Fabricate, cut, bend, and assemble Mild Steel (MS) structures, tanks,

frames, and equipment as per approved drawings and specifications.

o Perform welding (MIG, TIG, Arc) and grinding to achieve required joints and

finishes.

o Ensure proper alignment, fitting, and accuracy during fabrication and erection.

2. Material Handling

o Read and interpret fabrication drawings, cutting lists, and BOQs.

o Measure, mark, and cut MS sheets, pipes, channels, and angles using

appropriate tools and machines.

o Handle material safely with cranes, hoists, or manual equipment.

3. Welding & Finishing

o Carry out welding works on MS components with proper electrodes and

consumables.

o Conduct surface preparation including grinding, sanding, or cleaning before

finishing.

o Apply protective coatings (primer, red oxide, epoxy, etc.) where required.

4. Quality Assurance

o Inspect joints, dimensions, and finishes to meet quality standards.

o Repair defects such as cracks, porosity, or misalignment.

o Maintain records of fabricated parts and assemblies.

5. Health & Safety

o Follow all safety protocols while handling welding, cutting, and heavy

materials.

o Use PPE (helmet, gloves, safety glasses, welding mask, etc.) at all times.

o Ensure safe housekeeping in the fabrication area.

Skills & Competencies Required:

 Strong knowledge of MS fabrication techniques and welding methods.

 Ability to read and interpret technical drawings and fabrication layouts.

 Skilled in operating cutting torches, grinders, and welding machines.

 Good teamwork and ability to coordinate with supervisors and site engineers.

 Commitment to quality and precision in work.

Work Conditions:

 Workshop and site-based role.

 Exposure to welding fumes, sparks, and noise.

 Requires use of PPE and adherence to safety standards.

 May involve overtime and working at heights depending on project needs.

Key Responsibilities:

1. Fabrication & Assembly

 Fabricate, cut, bend, and assemble Stainless Steel (SS) components, tanks, vessels,

piping, and structures as per drawings and specifications.

 Carry out precision fabrication to maintain dimensional accuracy and required surface

finish.

 Fit, align, and tack-weld parts before final welding.

2. Welding & Finishing

 Perform welding operations (TIG, MIG, or Argon welding) on stainless steel

materials.

 Ensure clean welds without cracks, porosity, or discoloration.

 Carry out polishing, buffing, or passivation for hygienic and corrosion-resistant finish,

especially for food-grade or water-treatment applications.

3. Material Handling & Preparation

 Interpret fabrication drawings and cutting lists.

 Measure, mark, and cut SS sheets, rods, and pipes using plasma cutters, shears, or

grinders.

 Handle and store SS materials properly to avoid contamination or surface damage.

4. Quality Control

 Inspect welds, joints, and surface finishes to meet industry and client standards.

 Maintain tolerances as per design specifications.

 Conduct leak tests for tanks/piping where required.

5. Safety & Compliance

 Follow all safety protocols during welding, grinding, and cutting.

 Use PPE (welding mask, gloves, apron, safety glasses, etc.) at all times.

 Ensure compliance with workplace safety and quality standards.

Skills & Competencies Required:

 Expertise in SS fabrication and TIG welding.

 Ability to read and interpret technical drawings and fabrication layouts.

 Knowledge of different grades of stainless steel (304, 316, etc.) and their applications.

 Precision, attention to detail, and finishing skills.

 Ability to work independently or in a team on site or workshop.

Work Conditions:

 Workshop and site-based role.

 Exposure to welding arc, heat, and metal dust.

 Requires strict use of PPE and adherence to safety procedures.

 May require overtime or site visits based on project needs.

Job Types: Full-time, Permanent

Pay: ₹8,086.00 - ₹31,408.76 per month

Benefits:

• Health insurance
• Life insurance
• Paid sick time
• Provident Fund

Work Location: In person