Senior Civil Engineer

·      Planning of upcoming activities. ·      Schedule of overall project. ·      Guide to all engineer and supervisor about execution. ·      Check all DWG and revised DWG. ·      Co-ordinate with client project engineer and general manager related all upcoming activities and DWG, differences in DWGs. ·      Co-ordinate with client general manager related all site issues (quality, quantity, checking, etc.) ·      Identify problems on site and resolve it with client general manager. ·      Make & maintain manpower report and daily progress report. ·      Found differences between old and revised DWG. ·      Randomly checked all docs related site execution (once in weekly) ·      Randomly checked all safety docs (once in weekly) ·      Randomly checked house keeping all site and colony (once in weekly) ·      Every day records and take follow up from engineers related daily project progress ·      Every day take follow up from safety officer & engineer’s related material requirement. ·      Shuttering material should be clean before fitting (Mivan shuttering) ·      Shuttering material surface should be clean & provide oil sufficient for smooth surface ·      Shuttering fitting should be proper and provide sufficient support for vertical as well as horizontal element. ·      If require extra support re check shuttering material and provide sufficient support. ·      Check all column’s plumb before and after casting ·      Mark 1mt LVL on every column which are casted ·      Required column cap (TOPI) in every casted column at slab shuttering LVL ·      Each floor stair and lift should be in priority ·      Refer and discussed each and every DWG of slab before start work with p.m. ·      Take all DWG and read it before start work. Take hard copy if possible, take soft copy in AUTO-CAD file format. ·      Make sure about supporting before casting ·      Be present on TBT and inform all Forman’s regarding further and daily routine activities. ·      Make list and mark in no of column which is ready for cast with qty. ·      Shuttering material stacking properly ·      Removed all shuttering material from slab surface after completing D-shuttering of slab ·      Supervisor (casting supervisor) send you casting column no list after completing casting. It’s useful for de-shuttering work and record it. ·      Calculate QTY for casting which are ready to be cast. Its list out and send to supervisor, client engineer and p.m. ·      All steel checks ·      Before column fitting check ring size & hook of ring ·      Check column’s steel vertical no of bars, laps required. ·      Mark column no on DWG which is ready for shuttering ·      After checking of column by client engineer, mark on DWG and sent it to shuttering engineer. ·      Make sure and checked column and slab before client’s engineer checked. ·      Give Information to F.M. of column steel, typical column. ·      Give proper guidance to fm. About stair, lift and cut out steel details ·      Check cutting length if there are issues or wastages then discussed with p.m. and client engineer. ·      Check laps in Column vertical bar no one laps more than 50 mm of required lap. ·      No one lap of vertical bar in slab area ·      Be present on TBT and inform all Forman’s regarding further and daily routine activities. ·      Make list and mark in no of column which is ready for shuttering. ·      Steel material stacking properly ·      Removed all steel material from slab surface after completing steel work of slab ·      Steel QTY should be calculate before 20 days of slab casting. ·      Inform p.m. about Steel QTY for next month requirement before 20 days. ·      Always feed no of Forman and agency owner and Holt on them.