65 Jobs in Oragadam, Chennai, Tamil Nadu

Maintenance Technician – Plastics Injection Molding (Minimum 3 Years Experience) – Roles and Responsibilities A Maintenance Technician in a plastics injection molding company is responsible for the maintenance, repair, and troubleshooting of injection molding machines, molds, and auxiliary equipment to ensure uninterrupted production and machine reliability. The role requires a minimum of 3 years of experience specifically in maintenance within a plastic injection molding manufacturing environment. Key Responsibilities: Machine Maintenance: Perform preventive and breakdown maintenance on plastic injection molding machines (e.g., Haitian, Arburg, JSW, etc.) including hydraulic, pneumatic, and mechanical systems. Auxiliary Equipment Maintenance: Maintain and troubleshoot auxiliary equipment like mold temperature controllers (MTC), hot runner systems, hopper dryers, chillers, cooling towers, and compressors. Mold Setup Support: Assist in mold loading/unloading, ensure proper alignment, and maintain mold cooling/heating systems during production runs. Electrical Maintenance: Handle basic electrical tasks such as sensor replacement, heater band checks, panel wiring, motor control, and PLC I/O diagnostics related to molding equipment. Daily Machine Checklists: Carry out and record daily machine checklists, monitor machine performance, and take proactive action to prevent unplanned stoppages. Spare Parts & Tools Management: Ensure proper handling, storage, and inventory tracking of spares and maintenance tools used in molding equipment. Root Cause Analysis: Identify root causes of recurring breakdowns and work on long-term solutions to increase equipment uptime and efficiency. Safety & Housekeeping: Adhere to safety protocols while performing maintenance tasks and maintain cleanliness in the machine and utility areas. Process Improvement: Support continuous improvement initiatives to optimize machine performance, reduce downtime, and increase equipment lifespan. Job Type: Full-time Pay: ₹25,000.00 - ₹35,000.00 per month Benefits: Food provided Health insurance Work Location: In person

Requisition ID: 39260 Job Location(s): Oragadam, IN Employment Type: Full Time Segment: Group Functions CFO Job Function: Information Technology Work Location Type: Hybrid Job Description Danfoss Group IT & Digital is seeking an experienced and passionate Cloud Architect (infrastructure) with a focus on public cloud and platform engineering to join our Infrastructure Architecture team. You will play a key role in designing, building, and maintaining our hybrid and multi cloud infrastructure architecture, ensuring it is scalable, secure, reliable, and optimized for the developer experience. You will work closely with other engineers, architects, and stakeholders to develop and implement cloud platform services that meet the needs of our business. As a part of the Platform engineering journey, you are a vital part of the team, as we implement a multi and hybrid cloud approach based on AWS, Azure, GCP and private cloud. Job Responsibilities In your daily job you will: Analyze the current state, design, and develop architecture road maps for future implementation Collaborate with cross-functional teams to understand business and application requirements then translate them into scalable and secure cloud solutions. Drive our adoption of Cloud technologies by designing and implementing a hybrid cloud architecture according to industry standards and best practices. Stay up to date on the latest cloud technologies and approaches related to platform engineering. Advocate for developer-centric infrastructure and tooling. Background & Skills Your profile: The perfect candidate should have worked as a cloud architect for 3-5 year and have the following skills: Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams. Excellent written and oral English language skills. Consulting and technical skills to deliver exceptional customer service. Sound knowledge in enterprise architecture frameworks such as TOGAF In depth knowledge of the major cloud providers (Azure, GCP and AWS) Experienced in cloud adoption frameworks (CAF) or similar. Strong understanding of cloud security best practices. Experience with Infrastructure as Code tools such as Terraform. Danfoss – Engineering Tomorrow At Danfoss, we are engineering solutions that allow the world to use resources in smarter ways - driving the sustainable transformation of tomorrow. No transformation has ever been started without a group of passionate, dedicated and empowered people. We believe that innovation and great results are driven by the right mix of people with diverse backgrounds, personalities, skills, and perspectives, reflecting the world in which we do business. To make sure the mix of people works, we strive to create an inclusive work environment where people of all backgrounds are treated equally, respected, and valued for who they are. It is a strong priority within Danfoss to improve the health, working environment and safety of our employees. Following our founder’s mindset “action speaks louder than words”, we set ourselves ambitious targets to protect the environment by embarking on a plan to become CO2 neutral latest by 2030. . Danfoss engineers solutions that increase machine productivity, reduce emissions, lower energy consumption, and enable electrification. Our solutions are used in such areas as refrigeration, air conditioning, heating, power conversion, motor control, industrial machinery, automotive, marine, and off- and on-highway equipment. We also provide solutions for renewable energy, such as solar and wind power, as well as district-energy infrastructure for cities. Our innovative engineering dates back to 1933. Danfoss is family-owned, employing more than 39.000 people, serving customers in more than 100 countries through a global footprint of 95 factories.

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are seeking a multidisciplinary engineer with hands-on experience in industrial automation , including robotics integration , machine vision systems , SPM design , and electromechanical systems . The ideal candidate will work on designing, developing, installing, and maintaining automated equipment and systems across the production environment. Key Responsibilities: 1. Industrial Automation & Robotics Design, integrate, and program industrial robots (e.g FANUC, Kawasaki). Develop PLC and HMI logic for automated systems (Omron, Panasonic, Mitsubishi, etc.). Commission robotic systems including EOAT (End of Arm Tooling) and safety systems. 2. Vision Systems Integrate machine vision systems (e.g. Cognex, Keyence, Omron,Luster) for quality inspection and part verification. Configure lighting, optics, and image processing logic. Debug and troubleshoot vision inspection failures and optimize reliability. 3. Special Purpose Machines (SPM) Participate in mechanical and electrical design of custom SPMs. Collaborate with fabrication, assembly, and commissioning teams. Conduct root cause analysis and continuous improvements on deployed SPMs. 4. Electrical Engineering Design electrical control panels, wiring diagrams, and layouts. Select components such as drives, relays, contactors, and sensors. Ensure compliance with safety and industry standards (CE,ISO). 5. Mechanical Engineering Support 3D modeling and drafting of automation fixtures and assemblies (using SolidWorks, AutoCAD, etc.). Perform tolerance stack-ups and mechanical FEA (if applicable). Evaluate pneumatics, hydraulics, actuators, and mechanical motion systems. 6. Project & Cross-Functional Collaboration Coordinate with production, maintenance, quality, and external vendors. Ensure timely project execution, cost control, and documentation. Support training and handover to operations/maintenance teams. Required Qualifications: Bachelor’s degree in Electrical / Mechanical / Mechatronics / Automation Engineering . 7to 12 years of experience in industrial automation or related field. Hands-on experience in PLC/HMI programming, robot integration, and machine vision systems. Solid understanding of control systems, sensors, servo motors, and actuators. Proficiency in CAD software (SolidWorks, AutoCAD Electrical, EPlan, etc.). Soft Skills: Strong problem-solving skills and troubleshooting mindset. Ability to manage multiple priorities and projects. Effective communication and teamwork abilities. Basic computer skills (MS Office, data entry, reporting) Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are seeking a skilled and motivated Technician with hands-on experience in industrial automation , vision systems , SPM , electrical , and mechanical systems . The role involves installation, maintenance, troubleshooting, and improvement of automated machinery and production systems. Key Responsibilities: 1. Industrial Automation: Install, calibrate, and maintain PLC-based automation systems. Troubleshoot issues related to sensors, actuators, drives (VFD/Servo), and controllers. Read and interpret electrical and control schematics. Assist in programming and debugging PLCs (Siemens, Allen Bradley, Mitsubishi, etc.). 2. Vision Systems: Install and configure industrial vision systems (Cognex, Keyence, etc.). Calibrate lenses, lighting, and image-processing software for quality inspection. Troubleshoot and optimize vision system performance. 3. Special Purpose Machines (SPM): Assemble, install, and commission special purpose machines. Perform mechanical and electrical integration of SPM. Support production trials and provide on-site troubleshooting. 4. Electrical Work: Panel wiring, field wiring, and cable routing as per electrical drawings. Install and maintain industrial electrical components: relays, contactors, switches, transformers, etc. Perform preventive and breakdown maintenance of electrical systems. 5. Mechanical Work: Assemble mechanical parts and subsystems based on CAD drawings. Diagnose mechanical issues in automation equipment (e.g., alignment, wear). Perform basic machining, fitting, and adjustments. Qualifications: Diploma/ITI in Electrical, Mechanical, Mechatronics, or Automation Engineering. 2–7 years of hands-on experience in automation, SPM, and vision systems. Skills Required: Working knowledge of PLCs and HMI programming (basic level acceptable). Familiarity with industrial safety standards. Strong troubleshooting and root-cause analysis skills. Ability to read and interpret electrical and mechanical drawings. Knowledge of pneumatic and hydraulic systems (preferred). Basic computer skills (MS Office, data entry, reporting) Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

Technical communication window for customers. Accountable for customer approvals on DFM (Process / Fixture), DOE, FMEA & Part Qualification Reports within stipulated timeline. WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Main Responsibility Key Contributor in Fixture Design and Process Parameter reviews to ensure meeting part specifications. Initiate & conduct DOE studies to determine optimum process & part condition. Identify early & actively involve resolving technical issues that arise during the development process. Ensure Parameter tweaking methods positively resolve the part issues to meet target schedule. Responsible for dimension / cosmetic waiver reports as per customer expectation. Arrange for customer build demand (Secondary Process such as Sandblast, ultra sonic Cleaning, and Lapping Process). Validate reports from Design, QA & Engineering Departments which need to be sent to customers. Authenticate Process Validation methods and get approval from end customer. Proper feedback reports for customer's 3D Cad & 2D Drawing (FIT check / Tolerance) Effectively collaborate with cross functional teams like tooling / quality / production to complete the tasks. Ensure & Monitor Process buy-off procedures meet the customer standards. Maintain error reports & prepare lesson learned report. Closely work with the Program Manager to accomplish jobs on time. Requirements Degree / Diploma in Mechanical Engineering, Manufacturing Engineering. Minimum 2 years’ Experience in Sandblast, Ultrasonic Cleaning & Lapping Process. Strong in Precision component manufacturing and fabrication techniques. Experienced in Product development stages / Program Management. Essential Working Skill in 3d modeling software’s like SolidWorks / Pro-E / AutoCAD Able to work in MS-Office tools => Excel & Power point. Hands on Experience in Sandblast, Ultrasonic Cleaning, Lapping & Part Qualification procedures. Familiar with Quality Equipment and its usage (OMM/CMM). Working English communication. (Read / Write / Listen & Speak) Data analytical skills. “Can Do” Attitude & Problem Solving. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are seeking a skilled and detail-oriented Manufacturing Engineer to oversee and optimize the ultrasonic cleaning process used in our production line. The ideal candidate will ensure efficient, safe, and high-quality cleaning of parts/components through the ultrasonic cleaning systems. Key Responsibilities: Develop, implement, and optimize ultrasonic cleaning processes for metal, plastic, or composite components. Maintain appropriate cleaning chemicals, frequencies, power settings, and cycles for different product requirements. Collaborate with design, quality, and production teams to establish cleaning specifications and standards. Set up and validate ultrasonic cleaning machines and equipment. Monitor process performance and adjust parameters to ensure consistent cleanliness and minimal residue or contamination. Conduct root cause analysis and resolve issues related to cleaning defects or equipment malfunctions. Train operators and technicians on cleaning processes, maintenance routines, and safety practices. Maintain documentation for standard operating procedures (SOPs), work instructions, and quality reports. Work closely with the quality assurance team to meet internal and customer cleanliness standards (e.g., particle count, surface residue). Recommend improvements in process flow, equipment layout, and automation for increased efficiency. Coordinate with vendors for procurement and maintenance of ultrasonic cleaning equipment. Qualifications: Diploma or bachelor’s degree in mechanical engineering, Manufacturing Engineering, or related field. 2–5 years of experience in a manufacturing environment with exposure to cleaning or surface preparation processes. Hands-on experience with ultrasonic cleaning systems and related equipment (e.g., filtration, rinsing, drying units). Knowledge of cleaning chemistry, materials compatibility, and surface finish standards. Familiarity with ISO 16232, VDA 19 or other cleanliness evaluation standards is an advantage. Strong problem-solving, documentation, and communication skills. Experience with lean manufacturing and continuous improvement tools (5S, Kaizen, FMEA, etc.) preferred. Desirable Skills: Understanding of part contamination sources and mitigation. Familiarity with automation or robotics used in cleaning lines. Basic knowledge of PLC or control systems related to ultrasonic cleaners. Ability to interpret engineering drawings and cleanliness requirements. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are seeking a skilled Lathe Manufacturing Engineer to oversee and optimize the operation, programming, and process development of CNC and conventional lathe machines. The candidate will be responsible for improving productivity, ensuring part quality, and supporting production through robust machining processes and tooling. Key Responsibilities: Develop and optimize CNC turning processes for precision components (tool paths, cycle time, surface finish, tolerance control). Create and modify CNC programs (Fanuc, Siemens, Mitsubishi, etc.) and validate first-off parts. Select appropriate tools, inserts, holders, and cutting conditions for turning operations. Conduct time studies and improve cycle time (CT) by adjusting RPM, feed rate, and depth of cut. Resolve machining issues including chatter, tool wear, runout, and dimension deviations. Collaborate with design, quality, and production teams to ensure manufacturability. Support new product development (NPD) by defining turning process plans and tooling. Implement best practices in workholding, tool life monitoring, and coolant management. Conduct root cause analysis for part defects and drive corrective actions. Support TPM and preventive maintenance schedules related to lathe equipment. Maintain detailed documentation ( SOPs, process sheets, inspection reports ). Required Skills: In-depth knowledge of CNC lathe operations (2-axis to multi-axis, sliding head, etc.) Hands-on experience with insert grades, tool selection, and cutting data optimization. Knowledge of G-code, M-code, and CNC programming. Experience with process improvement tools (Lean, Kaizen, 5S, etc.) Ability to interpret mechanical drawings, GD&T, and tolerance stack-up. Familiarity with inspection methods using Vernier, Micrometer, CMM, etc. Educational Qualification: Diploma / B.E. / B.Tech in Mechanical Engineering or Production Engineering Preferred Qualifications (Optional): Experience with Tsugami, Citizen, Star, or similar machines. Knowledge of CAM software (Espirit or Similar) Exposure to automation in turning (robot loading, bar feeder, etc.) Knowledge of ERP systems for job routing and tool tracking. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Purpose: To set, operate, and maintain CNC sliding head lathes to produce precision components as per engineering drawings and specifications, ensuring high quality and production efficiency. Key Responsibilities: Machine Setting: Set up and adjust sliding head CNC lathes for new production batches. Load correct programs and fine-tune offsets for optimal machining. Select and install appropriate tools, collets, and fixtures. Conduct first-off inspection and ensure parts meet dimensional accuracy. Operation: Operate machines to produce parts per schedule. Monitor machine operation and part quality during production runs. Maintain cycle time, tool life, and part consistency. Adjust machine settings in-process as needed. Maintenance and Troubleshooting: Perform routine maintenance (coolant top-up, cleaning, basic lubrication). Troubleshoot minor machine or tooling issues. Report major faults or breakdowns to the maintenance team. Quality and Documentation: Perform in-process and final inspection using micrometres, vernier callipers, and other precision instruments. Maintain production and inspection records. Follow quality and safety protocols as per company standards. Process Improvement: Suggest improvements to reduce cycle time and tool wear. Support continuous improvement and 5S practices on the shop floor. Required Skills and Qualifications: ITI / Diploma in Mechanical or Production Engineering. 2+ years hands-on experience in setting and operating sliding head lathes (e.g., Citizen, Tsugami, Star). Strong knowledge of G-code and CNC program understanding. Ability to read and interpret engineering drawings. Skilled in using measurement instruments like micrometres, vernier callipers, dial gauges. Basic knowledge of tool geometries and insert selection. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Purpose: To manage and optimize ultrasonic cleaning processes used in the preparation of precision components by ensuring cleanliness standards, process stability, and production efficiency are consistently achieved. Key Responsibilities: 1. Production Operations: Supervise daily ultrasonic cleaning operations and manpower. Ensure all components are cleaned as per standard operating procedures (SOPs). Monitor cleaning cycle parameters such as temperature, time, frequency, and detergent concentration. Maintain cleanliness levels as per industry or customer-specified requirements (e.g., particle count, NVR limits). 2. Process Control & Optimization: Establish and maintain process parameters for different product families. Continuously monitor and improve cleaning cycle efficiency, chemical usage, and water consumption. Develop and implement process improvements to reduce cycle time, reject rate, and chemical costs. Validate new processes or materials before production scale-up. 3. Equipment Maintenance: Coordinate with maintenance for periodic servicing and preventive maintenance of ultrasonic tanks and related equipment (e.g., RO units, filters, dryers). Monitor equipment health and troubleshoot any abnormalities (e.g., heating failure, cavitation issues, or transducer damage). 4. Quality & Documentation: Ensure cleaning validation records, process logs, and inspection reports are properly maintained. Support quality audits and implement corrective actions related to cleaning issues. Coordinate with the Quality team for cleanliness testing (e.g., gravimetric analysis, Millipore testing). 5. EHS & Compliance: Ensure proper handling and disposal of chemicals and waste water as per safety and environmental guidelines. Train operators on chemical handling, PPE usage, and emergency procedures. Implement and enforce 5S and safe work practices in the cleaning area. Required Skills and Qualifications: Diploma / B.E / B. Tech in Mechanical / Chemical / Production Engineering. 2+ years of experience in ultrasonic cleaning or similar surface treatment processes. Good understanding of ultrasonic cleaning principles, chemical compatibility, and contamination control. Experience working with RO/DI water systems, dryers, and filtration systems. Ability to interpret cleanliness specifications and inspection standards. Desirable Skills: Experience in medical, aerospace, or semiconductor industry cleaning standards. Knowledge of ISO 14644 (cleanroom), ISO 16232 (cleanliness in automotive), or similar cleanliness standards. Basic knowledge of Lean Manufacturing and Six Sigma tools. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Purpose: To lead and manage the protective filming and packing processes to ensure products are delivered damage-free and meet quality standards. Responsible for developing and optimizing protective film application and packing methods for delicate or high-precision components. Key Responsibilities: Process Planning & Execution: Develop standard operating procedures (SOPs) for protective film application and packing. Ensure correct selection and usage of protective films based on surface type (mirror finish, coated surfaces, etc.). Implement best practices for wrapping, cushioning, and boxing to prevent transit damage. Quality Control: Ensure no surface damage (scratches, dents, or stains) during film application or packing. Perform in-process and post-process inspections. Lead investigations for any damage claims and implement corrective actions. Material Management: Coordinate with procurement for timely availability of protective films, packing foams, bubble wraps, tapes, and boxes. Evaluate and suggest cost-effective packing solutions without compromising protection quality. Team Management: Supervise operators and contract labour involved in protective filming and packing. Train staff on handling fragile/critical parts and maintaining cleanliness during the process. Process Improvement: Continuously evaluate and improve protective film techniques to reduce time and increase efficiency. Collaborate with R&D or design to improve product-packaging compatibility. Implement lean manufacturing practices in packing areas. Compliance & Documentation: Maintain documentation of all packing standards and inspection records. Ensure compliance with ESD, RoHS, export regulations, and customer-specific packing standards. Qualifications & Skills: Education: Diploma/Degree in Mechanical, Industrial, or Production Engineering. Experience: 2–5 years of experience in protective film application, cleanroom packing, or precision parts packaging. Technical Skills: Familiarity with cleanroom practices (if applicable). Knowledge of surface-sensitive material handling. Basic CAD or drawing interpretation skills. Soft Skills: Attention to detail Team leadership Problem-solving and decision-making Good communication and coordination skills Preferred Industry: Precision manufacturing, semiconductor, medical devices, electronics, automotive components, or similar fields involving delicate product handling. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are seeking an experienced and detail-oriented Manufacturing Engineer to manage and optimize the lapping process for achieving precision surface finish and flatness on critical components. The role involves development, troubleshooting, and continuous improvement of lapping operations to meet tight dimensional tolerances and surface quality specifications. Key Responsibilities: Develop and optimize lapping processes to achieve desired flatness, parallelism, and surface finish (e.g., Ra, Sa). Select appropriate lapping machines (single side), abrasives (diamond, aluminium oxide, SiO2 etc.), and consumables (lapping plates, slurries, carriers). Design and implement process parameters such as pressure, speed, slurry flow rate, and cycle time. Evaluate incoming component condition and define pre-lapping/post-lapping requirements. Create and maintain process documentation, SOPs, work instructions, and quality records. Troubleshoot lapping defects (e.g., scratches, waviness, taper, inconsistent finish) and implement corrective actions. Coordinate with QA to ensure part compliance to specifications using tools like surface profilometers, flatness gauges, and optical flats. Conduct trials and validations for new components and new product introduction (NPI). Work with suppliers for sourcing and maintaining lapping equipment and consumables. Drive continuous improvement projects to improve yield, reduce cycle time, and minimize rework. Train operators and technicians on process control, maintenance, and safety. Qualifications: Diploma or bachelor’s degree in mechanical engineering, Production Engineering, or related field. 2–5 years of hands-on experience in lapping or surface finishing processes. Strong knowledge of lapping machines (Lapmaster, Hyder or equivalent). Experience in working with tight tolerances for flatness (<5 μm), thickness, and Ra/Sa surface finish (<0.05 µm). Familiarity with surface measurement techniques (optical profilometers, interferometers, micrometers, dial indicators). Understanding of material removal rate (MRR) behaviour in fine finishing processes. Experience with hard-to-machine materials ( stainless steel, carbide, etc.) is a plus. Preferred Skills: Knowledge of CMP (Chemical Mechanical Polishing) or polishing processes is a must. Familiarity with lean manufacturing tools (5S, Kaizen, Root Cause Analysis). Exposure to working in cleanroom or high-precision environments (e.g., medical, optics, aerospace). Strong analytical, documentation, and communication skills. Ability to interpret engineering drawings, GD&T, and surface finish specifications. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are looking for a technically skilled Manufacturing Engineer to manage and optimize laser-based manufacturing processes such as laser cutting, marking, welding, engraving, or drilling. The candidate will be responsible for process development, machine setup, quality assurance, and continuous improvement initiatives related to laser operations. Key Responsibilities: Develop, implement, and optimize laser processes (cutting, marking, welding, or drilling) based on product and material requirements. Define process parameters (power, frequency, speed, focus, gas type, etc.) to meet part specifications. Program and operate laser systems (e.g., fiber laser & CO₂ laser). Analyse part designs to ensure laser feasibility and recommend modifications for manufacturability. Ensure process stability, repeatability, and quality through validation and control plans. Conduct root cause analysis of process defects (e.g., burns, incomplete cuts, poor marking contrast) and implement corrective actions. Collaborate with design, quality, and production teams to achieve throughput, yield, and cleanliness targets. Maintain SOPs, process documentation, and machine maintenance records. Support introduction of new products or components involving laser technology. Coordinate with machine and software vendors for installation, training, and support. Implement continuous improvement initiatives to reduce cycle time, cost, and scrap. Qualifications: Diploma or bachelor’s degree in mechanical engineering, Mechatronics, Manufacturing Engineering, or a related field. 2–5 years of hands-on experience in laser processing in a manufacturing environment. Proficiency in laser technologies (fibre, CO₂, or solid-state), laser optics, and beam delivery systems. Experience with laser machines from brands such as Trumpf, IPG, Coherent, Han’s Laser, or similar. Understanding of materials interaction with laser (metals, plastics). Knowledge of CAD/CAM software and CNC programming for laser systems. Familiarity with quality inspection methods related to laser processing (microscopy, profilometry, visual inspection). Strong problem-solving skills, attention to detail, and ability to work cross-functionally. Preferred Skills: Experience with automation or robotics in laser work cells. Basic understanding of laser safety (Class 1–4 laser systems) and implementation of protective measures. Knowledge of lean tools (Kaizen, 5S, SPC, FMEA, etc.). Exposure to cleanroom or precision manufacturing environments (if applicable). Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Purpose To manage and optimize the lapping process in the production line, ensuring surface finish, flatness, and dimensional accuracy of precision components while maintaining productivity and quality standards. Key Responsibilities Plan, monitor, and execute lapping operations based on production schedules. Set up and operate lapping machines (manual, semi-automatic, and fully automatic). Ensure proper selection and usage of lapping consumables such as abrasives, slurry, and conditioning rings. Establish and maintain process parameters to achieve desired Ra (surface finish), flatness, and parallelism. Troubleshoot lapping-related issues, including surface finish variations, loading patterns, and material wear. Coordinate with quality and R&D departments for process improvements and validation trials. Maintain machine health through routine checks, preventive maintenance, and service coordination. Train and guide lapping machine operators and shop floor technicians. Ensure adherence to safety standards and 5S practices. Prepare and maintain daily production, downtime, and quality reports. Work closely with tool room and fixture development teams to ensure fixturing adequacy. Key Skills & Competencies Strong understanding of lapping processes, surface metrology, and material removal mechanisms Knowledge of lapping materials : diamond slurry, alumina, silicon carbide, etc. Familiar with surface measurement equipment (profilometers, optical flat, interferometers, etc.) Ability to analyze data for continuous improvement (SPC, root cause analysis, etc.) Hands-on with precision parts, especially in automotive, aerospace, semiconductor, or medical industries Basic knowledge of ISO 9001 / IATF 16949 quality systems Qualification & Experience Diploma / BE / B.Tech in Mechanical, Production, or Manufacturing Engineering 2–6 years of experience in lapping or fine finishing operations Experience with double-sided or single-sided lapping machines (eg. Lapmaster, Speedfam, Hyder) is preferred Preferred Add-ons Exposure to flatness and mirror-finish requirements Knowledge in lapping automation or integration with upstream/downstream processes Familiarity with lean manufacturing and OEE tracking Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are looking for a well-organized and proactive engineer to manage the CNC tool store and tool inventory system , ensuring smooth and efficient tool availability for CNC machines. The role includes tool procurement planning, stock control, issuing/receiving tools, and coordination with production and maintenance teams to reduce downtime and tool-related issues. Key Responsibilities: Tool & Store Management: Maintain inventory of cutting tools, inserts, holders, collets, sleeves, gauges, and fixtures. Issue and receive tools based on production requirements using proper documentation. Track tool consumption, life, and usage per machine/component. Ensure proper storage, labelling, and handling of tools to prevent damage. Coordinate with Purchase/vendors for tool procurement and regrinding services. Maintain regrinding cycles, tool sharpening records, and scrap tool tracking. Maintain minimum stock levels and initiate timely reordering of tools. Monitor tool cost per component and suggest cost-saving alternatives. Process & Technical Support: Work closely with CNC programming and production teams to ensure correct tooling as per the process plan. Update and control master tool list, tool drawings, and technical datasheets. Assist in tool trial and validation for new components. Monitor tool performance and suggest changes for productivity improvement (tool life, cycle time). Record tool breakage and analyses root cause for improvements. Manage offline tool presetting if applicable. System & Documentation: Use ERP/MES/tool management software for issuing, tracking, and reporting tool data. Generate reports on tool usage, tool life, tool cost, and pending procurement. Implement 5S and safety practices in the tool store area. Maintain tool room logbooks, calibration records for gauges, and equipment audits. Qualifications: Diploma or bachelor’s degree in mechanical / production engineering. 2–5 years of experience in tool store/tool management in a CNC machining environment. Knowledge of CNC tools, insert grades, tool holders, and tool identification. Familiarity with machining processes: turning, milling, drilling, boring, tapping, etc. Ability to read and understand tooling diagrams and machining drawings. Experience with ERP software or digital tool management systems (e.g., Zoller, TDM, WinTool) is a plus. Preferred Skills: Knowledge of tool costing, vendor management, and regrinding practices. Experience with tool presetters or offline tool setting systems. Understanding of cutting tool technologies (ISO coding, grades, coatings). Proficiency in MS Excel, inventory tracking systems, and report generation. Good organizational and communication skills. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

WAKIN for a F2F interview on 21th July - 25th July between 10AM IST - 3:30PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Summary: We are seeking a skilled Esprit CAM Programmer and CAD Fixture Designer to support CNC machining operations by generating toolpaths using Esprit CAM software and designing precision work holding fixtures in CAD. The candidate should have experience with multi-axis CNC machining and fixture development for high-accuracy and complex components. Key Responsibilities: CAM Programming (Esprit): Develop and optimize 2D/3D CNC programs using Esprit CAM software for turning, milling, and multi-axis machines. Select appropriate cutting tools, speeds, feeds, and strategies based on material, machine, and component geometry. Simulate and validate NC programs for accuracy, collision detection, and machining efficiency. Collaborate with production and tool room teams for program implementation and troubleshooting on shopfloor. Support cycle time reduction, tool life optimization, and machining consistency. Fixture Design (CAD): Design and model work holding fixtures for CNC machining (jigs, soft jaws, clamping systems) using CAD software (e.g., SolidWorks, AutoCAD, or Fusion 360). Ensure fixture designs meet GD&T requirements, rigidity, accessibility for tools, and minimal part deformation. Generate 2D manufacturing drawings and BOM for in-house or external manufacturing. Coordinate with toolroom or external suppliers for fixture fabrication and validation. Support NPI (New Product Introduction) by designing fixtures for prototype and production batches. Process & Documentation: Maintain revision control and file management for CAM programs and fixture CAD files. Document setup sheets, tool lists, fixture drawings, and operation sequences. Participate in design for manufacturability (DFM) reviews and process planning. Provide training/support to CNC machine operators for setup and running new programs or fixtures. Qualifications: Diploma or bachelor’s degree in mechanical / production / Tool Engineering. 2–5 years of hands-on experience in CNC programming using Esprit CAM software. Experience in fixture design for precision machining using CAD tools (SolidWorks, AutoCAD, etc.). Strong understanding of GD&T, CNC machine kinematics, and machining fundamentals. Exposure to multi-axis machining (3-axis, 4-axis, 5-axis, or mill-turn) is preferred. Familiarity with various materials (aluminium, Stainless steel, titanium, etc.) and machining strategies. Preferred Skills: Knowledge of simulation tools within Esprit for collision and toolpath validation. Understanding of CNC setup procedures, tool presetting, and fixture validation. Exposure to lean practices and continuous improvement in machining. Basic knowledge of ERP or CAM file management systems. Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

PSP Nursing College is a distinguished institution dedicated to excellence in nursing education and healthcare training. As a constituent unit of PSP Hospital and the Apollo Group of Educational Institutions , the college benefits from a strong foundation of clinical expertise, academic excellence, and a commitment to community health. Approved by the Government of Tamil Nadu and recognized by the Tamil Nadu Nurses and Midwives Council . PSP Nursing College fosters a culture of discipline, compassion, and professional growth, preparing students to become competent, ethical, and compassionate nursing professionals ready to serve in diverse healthcare settings both in India and abroad. The Principal of the Nursing College is responsible for the overall leadership, strategic planning, academic integrity, and operational management of the institution. The Principal is expected to adhere to and implement the policies and strategic directives set forth by the management. Job Type: Full-time Pay: ₹85,000.00 - ₹100,000.00 per month Benefits: Food provided Paid sick time Work Location: In person Application Deadline: 24/07/2025 Expected Start Date: 24/07/2025

WAKIN for a F2F interview on 15th July - 17th July between 9AM IST - 12PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Title​ Automation Senior Engineer - Metal Injection Molding (MIM) ​ Experience : 8 to 15 years ​ Key Responsibilities​ Design, develop, and implement automation solutions for MIM production lines, ensuring compliance with ISOand IATF standards.​ Optimize automation systems for improved efficiency, yield, and reliability.​ Collaborate with cross-functional teams and ensure machine availability and achive KPI Target OEE,MTTR,MTBF. ​ Troubleshoot and resolve automation-related issues,maintain the Critical spare availability PM plan vs actual.​ Develop and maintain automation standards, best practices, and documentation (e.g., SOPs, work instructions).​ Requirements​ Experience in automation engineering, control systems, and robotics(Fanuc ,Kawasaki, Star) in MIM or similarindustries.​ Proficiency in automation controls (e.g., PLC, HMI, DRIVE,AOI,Vision system,SPM Machines ).​ Strong understanding of MIM process, automation principles, and regulatory requirements (ISO 9001, IATF16949).​ Experience with quality management systems (QMS) and compliance.​ Leadership and mentoring skills.​ Preferred Qualifications​ Proficiency in MS office ,Autocad ​ Experience with Industry 4.0 technologies (e.g., IoT, AI, machine learning) in MIM.​ Familiarity with simulation and modeling tools.Key Documents- ISO 9001 (Quality Management System)- IATF16949 (Automotive Quality Management System)- SOPs (Standard Operating Procedures)- Work instructions-Quality records and documentation​ Job Types: Full-time, Permanent Pay: ₹800,000.00 per year Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Work Location: In person

The Candidate have to meet customer get order for company , convening customer and influence the customer making order process for our company , finding new customer for our company , maintain existing customer for business development , have to meet customer in around chennai limit ( particularly wind mill , automobile industry Job Type: Full-time Pay: ₹20,000.00 - ₹25,000.00 per month Work Location: In person

Assistant manager marketing male candidate require for Fasteners company , one of the leading fasteners company in Tamil Nadu , require experience candidate for Chennai region , candidate should know basic knowledge about ( nut , bold wasser and other fasteners material knowledge ) the candidate should have good presentation skill , negotiation skill , ready to meet new customer for business development , knowing customer database , coordinating with other team member , Job Types: Full-time, Permanent Pay: ₹18,000.00 - ₹27,000.00 per month Benefits: Cell phone reimbursement Food provided Health insurance Leave encashment Provident Fund Education: Bachelor's (Preferred) Experience: Marketing: 10 years (Preferred) Client Management: 8 years (Preferred) Order picking and follow up: 8 years (Preferred) Work Location: In person

Dianaa hardware is the TVS business partner doing fastener business in chennai area currently we require Dispatch coordinator for chennai branch nature of the job driver coordination , inventory follow up , picker coordination , purchase coordination , Material follow up, bill check , vehicle follow up , Dispatch plan Job Type: Permanent Pay: ₹15,000.00 - ₹22,000.00 per month Benefits: Cell phone reimbursement Leave encashment Paid sick time Paid time off Work Location: In person

Job Title: Quality Inspector Location: Maraimallai Nagar, Chennai Experience: 0 – 1 Year Qualification: BE / Diploma / ITI in Mechanical or Automobile Engineering Gender: Male candidates only Joining: Immediate joiners preferred Job Description: We are looking for a motivated and detail-oriented Quality Inspector to join our team at our manufacturing facilities located in Vallam and Ambattur, Chennai. The ideal candidate will be responsible for ensuring products meet quality and safety standards through visual and dimensional inspections. Key Responsibilities: Perform visual and dimensional inspections of components and finished products Conduct in-process and final inspections to ensure compliance with standards Prepare and maintain MIS reports related to quality control activities Work closely with production and quality teams to resolve non-conformities Ensure proper documentation of inspection results and deviations Coordinate with cross-functional teams for continuous quality improvement Skills Required: Knowledge of visual & dimensional inspection techniques Ability to prepare and analyze MIS reports Strong team coordination and communication skills Basic computer proficiency (MS Excel, Word) Additional Information: Canteen facility available Opportunity to work in a dynamic and growing manufacturing environment Hands-on training provided for freshers Interested candidates can apply immediately. Join us to build a career in quality assurance and manufacturing excellence! Contact us on -8888621510, 89561 55495, 89567 84628,7722092712 Job Type: Full-time Pay: ₹15,000.00 - ₹20,000.00 per month Work Location: In person

Job Summary: The ETP/STP Operator manages the daily operation and maintenance of effluent and sewage treatment systems, ensuring wastewater is treated in compliance with environmental standards and safety regulations. Key Responsibilities: Operate and monitor treatment plant equipment and processes. Perform regular inspections, troubleshooting, and maintenance of machinery. Handle chemicals and ensure proper dosing for treatment. Collect samples and perform basic water quality tests. Maintain records and ensure compliance with environmental regulations. Adhere to safety protocols in the workplace. Qualifications: High school diploma or equivalent (vocational training preferred). 1-3 years of experience in wastewater treatment. Basic knowledge of water treatment processes and safety standards. Certification in wastewater treatment may be preferred. Physical Requirements: Ability to work in various environments and lift heavy objects. Working Conditions: Full-time position with shift work, including weekends and holidays. Job Type: Full-time Pay: ₹15,000.00 - ₹18,000.00 per month Benefits: Food provided Health insurance Leave encashment Provident Fund Work Location: In person

WAKIN for a F2F interview on 15th July - 17th July between 9AM IST - 12PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Title-​ Graduate Engineering Trainee (GET) Experience : Fresher Job Description: We are seeking a motivated and enthusiastic Graduate Engineer Trainee (GET) to join our engineering team. The GET will be responsible for assisting in various engineering projects, gaining hands-on experience, and contributing to the development of innovative solutions. Key Responsibilities: Assist in the design, development, and testing of engineering projects. Collaborate with senior engineers to analyze project requirements and specifications. Participate in project planning and execution, ensuring adherence to timelines and budgets. Conduct research and analysis to support engineering decisions. Prepare technical documentation and reports. Participate in team meetings and contribute ideas for process improvements. Support the engineering team in troubleshooting and resolving technical issues. Qualifications: Bachelor’s degree in Engineering - BE / BTech (Mechanical, Electrical, Civil, or related field). Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Proficiency in engineering software and tools (e.g., CAD, MATLAB). Willingness to learn and adapt in a fast-paced environment. CTC: BE- 23,958 CTC, 20000TH Job Types: Full-time, Permanent Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Schedule: Fixed shift Supplemental Pay: Performance bonus Yearly bonus Education: Bachelor's (Preferred) Work Location: In person

WAKIN for a F2F interview on 15th July - 17th July between 9AM IST - 12PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Meet - Sanjay - HR Job Title​ Automation Senior Engineer - Metal Injection Molding (MIM) ​ Experience : 8 to 15 years ​ Key Responsibilities​ Design, develop, and implement automation solutions for MIM production lines, ensuring compliance with ISOand IATF standards.​ Optimize automation systems for improved efficiency, yield, and reliability.​ Collaborate with cross-functional teams and ensure machine availability and achive KPI Target OEE,MTTR,MTBF. ​ Troubleshoot and resolve automation-related issues,maintain the Critical spare availability PM plan vs actual.​ Develop and maintain automation standards, best practices, and documentation (e.g., SOPs, work instructions).​ Requirements​ Experience in automation engineering, control systems, and robotics(Fanuc ,Kawasaki, Star) in MIM or similarindustries.​ Proficiency in automation controls (e.g., PLC, HMI, DRIVE,AOI,Vision system,SPM Machines ).​ Strong understanding of MIM process, automation principles, and regulatory requirements (ISO 9001, IATF16949).​ Experience with quality management systems (QMS) and compliance.​ Leadership and mentoring skills.​ Preferred Qualifications​ Proficiency in MS office ,Autocad ​ Experience with Industry 4.0 technologies (e.g., IoT, AI, machine learning) in MIM.​ Familiarity with simulation and modeling tools.Key Documents- ISO 9001 (Quality Management System)- IATF16949 (Automotive Quality Management System)- SOPs (Standard Operating Procedures)- Work instructions-Quality records and documentation​ Job Types: Full-time, Permanent Pay: ₹800,000.00 per year Benefits: Commuter assistance Food provided Health insurance Paid sick time Provident Fund Schedule: Fixed shift Supplemental Pay: Performance bonus Yearly bonus Work Location: In person

Manufacturing Engineer Job Description: WAKIN for a F2F interview on 15th July - 17th July between 9AM IST - 12PM IST at TDConnex , Greenbase Industrial and Logistics Parks, Hiranandani Parks, GB-180B, via, Thriveni Nagar, Vadakkupattu, Oragadam, Tamil Nadu 603204. Develop new processes, assess and document new processes. Implement and evaluate changes to existing processes designed to improve product quality, productivity and overall equipment efficiency. · Provide technical leadership and mentorship to process technicians, operators and other molding personnel. · Develop and maintain process documentation ensuring that processes and procedures are clearly stated and understandable for all employees. Provide technical support/solutions to manufacturing processes, improve yield and throughput, drive cost reduction activities and improve on part quality. · Demonstrated ability to start-up, operate and shut down process related equipment. Must be able to work independently on new process development as well as troubleshooting current production issues. · Work with equipment and material vendors to resolve machine and material issues. · Monitor and report issues with injection molds, make recommendations for refurbishment based on production factors such as cycles, process capability and tooling history. · Interact with customers to resolve issues and provide new project updates. · Implement technical solutions including statistical methodology to meet customer cost, quality, and delivery expectations Job Types: Full-time, Permanent Pay: ₹400,000.00 - ₹700,000.00 per year Benefits: Commuter assistance Food provided Health insurance Leave encashment Life insurance Paid sick time Provident Fund Schedule: Fixed shift Supplemental Pay: Performance bonus Yearly bonus Work Location: In person