46 Jobs in Jhagadia, Gujarat

Structure Zircon_MPP Job posted on Aug 01, 2025 Employee Type Full Time Experience range (Years) 3 years - 6 years

Structure Construction 2_Construction Team 3 Job posted on Aug 01, 2025 Employee Type FTE Experience range (Years) 3 years - 10 years

1. Execute the synthetic route for the target molecules under the supervision of Executive. 2. Log the readings and observations and analyses the results and note down in Lab note book 3. Report the observations, results and conclusions co-ordinate with subordinates and HOD. 4. Take part in the R&D Review meetings and give suggestions/solutions for next steps to be taken. 5. Maintain R&D apparatus and equipment in good condition 6. Calibrate/ Verification the instruments and testing apparatus. 7. Maintain the R&D records as per requirements. 8. Observe safety practices for handling of hazardous chemicals Job Type: Full-time Pay: ₹25,000.00 - ₹30,000.00 per month Benefits: Food provided Health insurance Leave encashment Provident Fund Experience: total work: 2 years (Preferred) Work Location: In person

Sub Function/POD Zone 2 Quality_Team 2 Job posted on Aug 01, 2025 Employee Type Full Time Experience range (Years) 2 years - 14 years

* Prefer experience API/Pharma/Chemical industries in R&D department. Qualification - ITI LACP Job Type: Full-time Pay: ₹15,000.00 - ₹24,000.00 per month Benefits: Food provided Health insurance Leave encashment Provident Fund Experience: total work: 2 years (Preferred) Work Location: In person

* Prefer API & chemical experience candidates. * Procure Raw Material Items. * Receive indents from Users. * Floating inquiries to vendors for new items & preparing quotation comparisons. * Negotiate the best rate with different vendors. * Prepare and send purchase orders to vendors and ensure material availability at right time. * Co-Ordination with Stores for GRN. Job Type: Full-time Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Food provided Health insurance Leave encashment Provident Fund Experience: total work: 2 years (Preferred) Work Location: In person

Structure Amber_CaCl2 Job posted on Jul 30, 2025 Employee Type Full Time Experience range (Years) 3 years - 5 years

MAIN PURPOSE OF ROLE Develop and implement production plans to maximize the use of the organization's resources and meet established production specifications and schedules, volume, cost, and wastage targets, and quality standards. MAIN RESPONSIBILITIES Use engineering plans, contracts, and production specifications to produce schedules and production plans and estimate the human resources, tools, and equipment needed to manufacture products. Monitor production activity and analyze production data so that the flow of materials is timed meet production requirements. Adjust schedules to accommodate backlogs, design changes, and material or labor shortages. Prepare work orders for production or purchase requests based on production schedules. Evaluate production specifications and plant capacity data to determine manufacturing processes and calculate machine and operator loads. QUALIFICATIONS Education Associates Degree (± 13 years) Experience/Background No Experience

MAIN PURPOSE OF ROLE Develop and implement production plans to maximize the use of the organization's resources and meet established production specifications and schedules, volume, cost, and wastage targets, and quality standards. MAIN RESPONSIBILITIES Use engineering plans, contracts, and production specifications to produce schedules and production plans and estimate the human resources, tools, and equipment needed to manufacture products. Monitor production activity and analyze production data so that the flow of materials is timed meet production requirements. Adjust schedules to accommodate backlogs, design changes, and material or labor shortages. Prepare work orders for production or purchase requests based on production schedules. Evaluate production specifications and plant capacity data to determine manufacturing processes and calculate machine and operator loads. QUALIFICATIONS Education Associates Degree (± 13 years) Experience/Background No Experience

Structure Zircon_MPP Job posted on Jul 25, 2025 Employee Type Full Time Experience range (Years) 2 years - 5 years

Structure Technology Pilot Plant_APTIC Job posted on Jul 25, 2025 Employee Type Full Time Experience range (Years) 2 years - 6 years

Dental Vacancy Available Hello everyone, We have a dentist vacancy at our clinic. Accomodation provided for out of town candidates ocation:Modern Denticare Timings: 9.30 AM to 5.30 PM sition: Dentist alary: As per discussion Interested candidates, please contact me at 8160743318 Kindly share this with anyone who may be looking for an opportunity. Thank you! Job Type: Full-time Pay: ₹8,763.80 - ₹42,528.38 per month Work Location: In person

Sub Department Amber_CaCl2 Job posted on Jul 24, 2025 Employee Type Full Time Experience range (Years) 3 years - 6 years

Department Ruby_Mechanical Operations Job posted on Jul 23, 2025 Employee Type Full Time Experience range (Years) 2 years - 12 years Mechanical Operations Executive Ruby

Department Zircon_MPP Job posted on Jul 22, 2025 Employee Type Full Time Experience range (Years) 2 years - 4 years

Structure Zircon_MPP Job posted on Jul 22, 2025 Employee Type Full Time Experience range (Years) 2 years - 5 years

Structure Utility Zone 2_Central Utilities Job posted on Jan 16, 2025 Employee Type Full Time Experience range (Years) 3 years - 10 years Please enter job description

Team Leader Process Job Id: 11414 City: Jhagadia, Gujarat, India Department: GF - 1 Function: Manufacturing Employee Type: Permanent Full Time Seniority Level: Executive Description: Production: 1.1 As per PTF , make day wise/weekly wise production plan,Inform to PI/SI for the plan,Circulate the soft copy to planner and seniors 1.2 Discuss with Seniors & QA person, Isolate failure batch, Implementation of cottection action with MOC, Do CAPA with QA person and submit report, Closing NCR in SAP 1.3 To resolve breakdowns in minimum time, Inform seniors, Make alternate arrangements, Guide PI/SI - for procedure, if in odd hours - coordinate with Eng. Team & resolve issue in person, Issue permit, do Entry & closing of SAP notification, to do CAPA with Eng. Team 1.4 Monitor BCT of bottleneck stages, Make action plans and discuss with seniors 1.5 To Prepare action plan to overcome changes & meet targets, Reschedule RM/PM, Seeking help from technical dept. & seniors 1.6 To Plan for rework in godown as per requirement, like lebelling, sealing, attending leakage 1.7 To Monitor the out put per shift. If any deviation discussion with PI/SI for action plan 1.8 To Monitor RM & PM stock in Physical/SAP on daily basis. Frequent follow up with planner for RM/PM items availability.. 1.9 To minimise Change over time, Conduct SMED with help of Maxpro+ team 1.10 To conduct performance and safety dialog,keep record and data entry 1.11 Take General plant rounds 2 times in day and filling checklist, Guide PI/SI for any abnormality to correct, Plant round with Seniors / Induction 1.12 Provide all the production data and communicate abnormalities & critical issues (if any) to HOD Quality: 2.1 Ensure on time receipt of results for SFG & FG, for any deviation resolve the problem 2.2 To Check logsheets and inform Operators related issues regarding batch failure and to execute reprocessing instructions received from Plant Incharge 2.3 To do logsheet checking,followup with operator for section,DCS operation , process parameter monitoring 2.4 To participate in RCA as and when requiredTo ensure best quality products are produced without any batch failure and to ensure compliance. Safety: To ensure Safest workplace and Safety in each operation of Plant and Ensure compliance with safety regulations and promote a safe working environment for all employees. Housekeeping & TQM: To ensure best housekeeping as per standards of 5S. Activity Involved in driving the TQM Culture in the plant. Manpower: To manage manpower and ensure efficient work from them. Responsible for yield improvement projects, cost optimization, reduction in breakdown, capacity utilization improvement, batch time cycle reduction, improvement in planning and working. Participation in DWM, 5S, AM, ensure ZLD and other parameters pertaining to operational efficiency.

Jhagadia Factory, Jhagadia, Gujarat, India Department Chem_QAC&PEG_PEG Job posted on Jul 16, 2025 Employment type Employee Key Responsibilities: Team Leadership and Management: Lead, mentor, and manage a team of process engineers. Provide guidance, training, and performance feedback to team members. Foster a collaborative and productive work environment. Conduct performance evaluations and identify areas for professional development. Process Design and Optimization: Design, develop, and optimize chemical manufacturing processes. Conduct feasibility studies and process simulations. Select and specify equipment and instrumentation for chemical production facilities. Develop and implement standard operating procedures (SOPs) for chemical production. Troubleshoot and resolve issues that arise during chemical manufacturing processes. Safety and Compliance: Ensure compliance with all relevant environmental, health, and safety (EHS) regulations. Develop and implement safety procedures for individuals working with dangerous chemicals. Conduct risk assessments and process simulations. Ensure processes are designed to minimize waste and environmental impact. Collaboration and Communication: Collaborate with cross-functional teams, including R&D, production, quality assurance, and maintenance. Communicate effectively with all stakeholders, including senior management, team members, and external vendors. Prepare detailed reports and presentations on process performance and improvements. Process Improvement and Innovation: Identify opportunities for process improvement and cost reduction. Implement best practices in process engineering, such as Six Sigma and Lean Manufacturing. Stay up-to-date on the latest advancements in chemical engineering and process optimization. Drive continuous improvement initiatives to enhance efficiency, quality, and safety. Project Management: Manage project timelines and budgets for process engineering projects. Ensure projects are delivered on time and within budget. Monitor and track project progress and performance.

Job title : Manager - Instrumentation and Electricals Entity : Evonik Specialty Silica India Pvt. Ltd. work location : Jhagadia, Gujarat Purpose of the Position: Safe and efficient management of preventive maintenance & breakdown of instruments and electrical equipments through effective engineering norms of ESSIPL to meet or exceed maintenance requirements. Communicating with authorities and complying with all associated legal requirements. Co-ordinating with regional PT Team for implementation of best maintenance practices like Risk Based Maintenance (RBM), EPS in Instrumentation and Electrical streams. Digitalization initiatives like OT security, and act as LOSC. Key Responsibilities: Management of Departmental Activities for Instrumentation and Electrical side. Handling and ensuring compliance related to Nucleonic Gauge (Should have completed Training through A.E.R.B./BARC) Work as Radiological Safety Officer for Organization. Ensure timely compliance of Instrumentation ( Weights and Measure Metrology related, GPCB related, etc.) Ensure timely compliance of Electrical (Annual Inspection, DG set registration & Duty filing, Communication with DGVCL/GETCO, Etc.) Experience on Rockwell Automation PLC System (Control Logix, PLANT PAX, FT BATCH, SCADA AND LOGIC programming development) . Experience of SAP and SAP Plant Maintenance module. ( Notification, Work Order management). Experience on filter press Hydraulic system, Spray Dryer Burner System, Boiler Burner and safety interlocking system. Ensure timely calibration of field instruments, MCI and various measuring instruments. Ensure timely attendance to break-down and emergency repair jobs. Guide subordinates to repair the equipment and keep it ready to use as per requirement. Ensure proper and safe operation of equipments used during maintenance and calibration. Install, commission and validate new equipment. Instrument and Electrical related Mechanical support designing, fabrication through vendor. Sizing and Selection of proper instrument (knowledge of Mass Flow meter, Pressure transmitter, Thermocouple, Magnetic Flowmeter, pH Meter, Turbidity meter, Conductivity meter, Ozone Generator, Weighing system, Etc) Telephone EPBX programming, Configuration, CCTV Configuration Etc. Contract man power planning, assigning them jobs daily and ensuring safe maintenance. Plan, schedule and carry out shut down maintenance jobs. Support in controlling maintenance cost, analyzing breakdown, Prepare CAPA, diagnosing, identifying the root cause and implementing the actions. Coordination with external vendors and other departments and sustain team work. Carry out cost estimate for equipment maintenance, repair and replacement. Attend assigned EHSQ and GMP related actions. Meet the applicable EHS legal and Evonik requirements. To ensure safe maintenance through adherence to the EHS policy, Life Saving Rules, Work Permit, use of Personal Protective Equipments, Management of Change, Pre-Job Plan, Incident Reporting, EHS procedures etc. Prepare and maintain documents like Equipment History Card, Maintenance Checklist, Reports to Management, Standard Practice Instruction, ISO related etc. Communication with authority and compliance of legal requirements. Active participation in conceptualization to execution to commissioning of projects. Ensure availability of spares by working with Purchase department and Engineering Stores by implementing Min/Max system for spares. Preparation of Appropriation Request for major expenditures. Responsible for imparting training on SAP Maintenance Module to all new joiners of the department. Digitalization initiatives like OT security including global policy/standard implementation, act Education & Experience Required : B.E. / B.Tech. – Instrumentation or Electronics & Communication with 10-12 years of experience in maintenance of plant. Additional requirements - Training cum Certification- course on Radiation Safety Aspects of Nucleonic Gauges. Active registration on ELORA AERB Website for Radiation Professional. Additional skills and abilities required for this position Man-power management. Fluency in English, Gujarati and Hindi language. Experience in SAP is preferred. PLC programming Your Application To ensure that your application is proceeded as quickly as possible and to protect the environment, please apply online via our careers portal . Further information about Evonik as Employer can be found at https://careers.evonik.com . Please address your application to the Talent Acquisition Manager, stating your earliest possible starting date and your salary expectations. Your Talent Acquisition Manager: Sagar Khedekar Company is Ev Spec Silica India

Join Envalior – Imagine The Future! Are you passionate about pioneering change in a constantly evolving environment? At Envalior, we are seeking a talented Master Production Scheduler to join our dynamic team. At Envalior, the future of high-performance materials isn't just being shaped; it's being pioneered. A belief in fostering an environment where every voice is heard and ideas are valued is integral to our culture. Empowerment is the driving force behind our pioneering spirit, allowing our teams to take initiative, explore new solutions, and revel in the thrill of constant innovation. Join us and be a part of a team committed to making a positive impact—where safety, sustainability, collaboration, and empowerment intersect to drive innovation. Requirements A. Detailed Scheduling 1.Provide 2 days firm + 2 days tentative planning to Production. 2.To ensure proper optimization of capacity / resources. 3.Work along with Production Manager to reduce changeovers 4.Maximize lot-sizes without incurring obsolescence. 5.Monitor actual production planning Vs S&OP planning. 6.Discuss & resolve any issues in good coordination with Technology & Quality. B. Market Commitments 1. Providing Order confirmation to every order entered in SAP system within 1 working day. 2. Going back to the customer service team in case of Eventualities / Unexpected delays against commitments. 3. Try & expedite production with respect to the back orders list towards better customer satisfaction. The Ideal Candidate: Commerce or Science Graduate with knowledge of Production Planning. Excellent Analytical, Inter-personal & communication skills with good judgement & problem solving attitude. Good knowledge of ERP systems – SAP – SD & PP module - Essential Plus 3 years of experience in Supply Chain function specialising in Production Planning / Customer service. Working Experience on PP module / Capacity Planning modules of SAP. Benefits Competitive Compensation Join us at Envalior and enjoy competitive compensation packages, inclusive of a global bonus program and individual performance bonuses, ensuring your hard work is recognized and rewarded. Comprehensive Benefits Your well-being matters to us. At Envalior, we provide an array of benefits supporting your financial security, health, and overall well-being. This includes retirement plans, health programs, life insurance, and comprehensive medical care. Work-Life Balance & Flexibility Maintain a healthy balance between work and personal life with Envalior's commitment to supporting your schedule. Training & Development Opportunities At Envalior, your growth matters. We encourage and invest in your professional and personal development. We support our employees in their growth and personal development through ongoing investment in their knowledge and skills via training, coaching, and mentoring. Diversity & Inclusion At Envalior, our people drive our success, so it’s only right that we provide a diverse and inclusive working environment and foster a culture of belonging, openness, and respect. We value diversity as a cornerstone of our success. We are committed to nurturing and empowering every individual to reach their full potential. APPLY NOW! Ready to pioneer change with Envalior? Join us in our mission to drive innovation, sustainability, and excellence. Apply today and become a part of our transformative journey towards a more sustainable future. Submit your application online by sending your CV and motivation letter in English through our career portal. If you have any questions, feel free to connect directly with our recruiter at [email protected] Envalior is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. If you need assistance or an accommodation due to a disability, you may contact us at [email protected] . OUR HERITAGE With a combined heritage of over 100 years, Envalior brings together two established global materials players: DSM Engineering Materials and LANXESS High Performance Materials. Our unique combined portfolio of longstanding material-, application-, and design expertise enables our customers to develop and launch sustainable future-proof designs. Envalior is the brand new materials powerhouse that was Launched in early 2023. We aim to be a global leader in sustainable and high-performance engineering materials. We imagine the future by shaping the world of today and tomorrow. We’re conscious that this is both a privilege and a responsibility – so, when we imagine the future, we’re guided by our key values to help us create a better world.

Structure Jade_Spl. Chlorination Job posted on Jul 05, 2025 Employee Type Full Time Experience range (Years) 2 years - 10 years Please enter job description

Structure Jade_CaCl2 Job posted on Sep 01, 2022 Employee Type Full Time Experience range (Years) 3 years - 6 years Shift Incharge

Position : Account Officer Location : Jhagadia Experience : 2 - 5 Years Industries : Chemical Responsibilities: Accounting Work Sales and Dispatch of Material, Internal Material Shifting Challan Bill Booking in SAP HANA 4 Prepare Sales Invoice, Internal Transfer Material Challan Along With E-Invoice, Away bill LR and COA Bill like Capital Good, RM Service, Rent, Fabrication, etc. Transportation , Labour BILL Etc Coordinate with Transporter for arrange Vehicle as per Planning Given by Production Team and Sales Team Vendor Reconciliation Make Also Scrap Invoice along with TCS SO Must be Knowledge of TCS,TDS ETC. Coordinate with HO Team Regarding Payment Bill Booking Etc Freight Charge Monthly Provision of Bills & Freight bills Booking Like DGVCL, Gujarat Gas Labour Bill, Transportation Coordinate with Sales Team and Production Team. Query of Bill Coordinate with Purchase a Team. Freight Bill Tracking with PO and Must Knowledge of GST,TDS and TCS Sale PO Tracking and Reconciliation with Sales Team Maintain Bill Record at Site (Scanning of Bill) Make sales and Internal Unit Material Shifting Record Required Skills Must have strong fluent English & good communication skill Commercial awareness. Interpersonal skills Teamwork Required Qualification: - B.Com/M.Com Job Types: Full-time, Fresher Pay: ₹25,000.00 - ₹30,000.00 per month Benefits: Health insurance Paid sick time Provident Fund Schedule: Day shift Work Location: In person

Structure Zone 2 Safety_Team 1 Job posted on Jun 30, 2025 Employee Type Full Time Experience range (Years) 0 - 0 Coordinate for the external and internal safety audit. Ensure all the statutory documents are well maintained and updated as & when required. Provide technical support to division safety team w.r.t. fire installation, audits and safety training. Coordinate with corporate affairs team w.r.t. statutory compliance. Prepare and implement various safety training modules as per the site requirements. Prepare and implement internal safety audits as per the site requirements. Ensure compliance of GFR, PESO, Poison license & relevant statutory requirement. Safety inventory management. To drive safety initiave at site level. Leading the safety programmes like national safety week, fire safety week, road safety week etc. Ensure fire tender checklists all implemented and team ready at any point of time for emergency handling. Supervise the work of subordinates, company’s employees & contract workers with respect to safety Carry out periodic inspection of the site to identify the unsafe conditions/practices and report the same to concerned functions for corrective actions Ensure JSA(Job Safety Analysis)/ Permit to Work System is strictly implemented in the factory Ensure that necessary monitoring and measurement of HSE performance parameters is carried out Appropriate investigation and reporting of OH&S (Occupational hazards and safety) incidents, transport incidents and implementation of corrective actions Ensure effective maintenance of firefighting and other safety appliances, calibration of all personal gas monitors, Maintain checklist of firefighting & emergency equipments and ensure that appropriate and adequate PPEs (Personal protective equipment) are made available to the employees Coordinate with all central safety committee members for compliance of points discussed in monthly safety committee meeting Prepare monthly safety performance report and present it in monthly safety committee meeting Ensure that on-site emergency plan is updated periodically and ensure adequate training is provided to the ERT (Emergency response team) on a regular basis Employees working at factory are trained and mock drills are carried out periodically to evaluate the effectiveness of emergency preparedness Impart SCBA training (Self-contained breathing apparatus) to ERT team on regular basis Conduct JSA (Job safety analysis), PSSR (Pre startup safety review), What IF, RCA (Root cause analysis) etc. as and when required