780 I2C Jobs - Page 29

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: 5 to 15 years of experience in Silicon characterization or silicon validation Expertise in the PnP characterization of SoC, PLL, Oscillators, etc. Firmware Development on multi-core microcontrollers or processors (ARM/RISC-V or similar) Experience working in a laboratory environment, familiarity with using lab equipment such as logic analyzers, spectrum analyzers, oscilloscopes, function generators, etc. Knowledge of electrical engineering fundamentals including CMOS device operation and characteristics Good understanding of semiconductor technology, solid state device physics and submicron FET architectures Good Experience in Python scripting Exposure to automated characterization flows to maximize use of equipment Initiative (self-motivated, self-confident, self-driven, self-learning, always striving for excellence) Good analytical skills and problem solver. Minimum Qualifications: "¢ Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience.

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: Experience of 3 - 5 years on any Embedded processor with proficiency in C/C++ programming, computer architecture, operating systems and some of the below areas: Knowledge of multi-threaded programming. Strong software debugging skills in real time operating systems. Audio use cases (e.g. playback, recording and streaming, etc.). Voice use cases (e.g. CS and PS calls). Audio/speech pre/post processing (e.g. Echo cancellation, Noise suppression, Audio Effects) Audio/speech compression standards (e.g. MP3, AAC etc.). Expertise in working with tools and techniques used on Audio HAL/Userspace/Frameworks (e.g. Trace32, JTAG, etc.). Audio Interfaces like I2S, HDMI, SPDIF Responsibilities:Responsibilities include developing Audio HAL/userpsace/enhancing the framework/drivers for new use cases, drivers for audio interfaces, drive design discussions across teams, SW maintenance. Minimum Qualifications: "¢ Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 4+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 3+ years of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. "¢ 2+ years of work experience with Programming Language such as C, C++, Java, Python, etc. This challenging job involves design, development and implementation of SW for audio/voice use cases in user space Audio HAL. The use cases span across smart phones, smart speakers, media boxes and a wide range of other smart devices. It requires gaining in depth understanding of the Audio architecture, various audio interfaces like I2S, HDMI, SPDIF etc, pre/post processing modules, Voice Activation and encoders/decoders for speech/audio. It provides opportunity to interact with Hardware, HLOS, Audio Tuning teams located globally. This position requires the candidate to design, implement, integrate and commercialize various software modules. Responsibilities also include requirements analysis, software maintenance and troubleshooting of audio framework, audio HAL, and drivers. Please apply if interested and prepared for this exciting but challenging opportunity This challenging job involves design, development and implementation of SW for audio/voice use cases on Qualcomm platforms. The use cases span across smart phones, smart speakers, media boxes and a wide range of other smart devices. It requires gaining in depth understanding of the Audio HAL/frameworks architecture, proprietary RTOS on DSP, DSP framework for audio/voice, various audio interfaces like I2S, HDMI, SPDIF etc, pre/post processing modules, Voice Activation and encoders/decoders for speech/audio.

Key Responsibilities Quality Assurance Leadership: Lead the software QA team in planning, designing, and executing test strategies for embedded systems across all phases of the Software Testing Life Cycle (STLC). Identify, analyze, and resolve software defects to enhance product quality using agile methodologies. Provide technical guidance and training to team members on test plan preparation, test case generation, and debugging techniques. Testing & Validation: Perform functional, integration, and system-level testing for embedded software, focusing on automotive ECUs, Battery Management Systems (BMS), or ignition control systems. Validate software performance using tools like CANalyzer, CANoe, PCAN Explorer, and Pico Scope, ensuring compliance with protocols such as CAN, J1939, SPI, and UART. Conduct hardware-software integration testing and debug issues using tools like DSO, function generators, and DMM. Documentation & Reporting: Document the engineering process, including System Requirement Specifications (SRS), DFMEA, test cases, test reports, and requirement traceability matrices. Use bug tracking tools (e.g., JIRA) to log defects, track resolutions, and provide detailed quality reports to stakeholders. Finalize new products by providing actionable feedback to the design and development teams. Process Improvement: Develop and maintain test setups, test plans, and standard operating procedures to ensure consistent quality standards. Leverage 7 QC tools and analytical skills to improve testing processes and reduce defects. Collaborate with cross-functional teams to ensure alignment between design, development, and quality goals. Project Support: Support the testing of embedded systems for automotive applications (e.g., BMS, ignition systems, or starter generators) and industrial products. Assist in environmental, mechanical, electrical disturbance, and EMI/EMC testing per ISO/IEC and CISPR standards. Contribute to new product development by reviewing specifications, evaluating components, and ensuring manufacturability. Qualifications Education: Bachelors degree in Electronics Engineering, Electrical Engineering, or a related field from a recognized university. Experience: Minimum of 6-8 years of experience in embedded software testing, with at least 3-5 years in a lead or supervisory role. Proven expertise in automotive embedded systems (e.g., ECU, BMS, ignition systems) and communication protocols (CAN, J1939, SPI, UART, I2C, RS485). Technical Skills: Proficiency in testing tools such as CANalyzer, CANoe, PCAN Explorer, Bus Master, JIRA, and Pico Scope. Experience with IDEs like CodeWarrior (10.5/10.6), CS++, and MPLAB IDE, and basic knowledge of Embedded C. Familiarity with test equipment like DSO, function generators, DMM, and sensors (NTC, Hall effect, CT/PT). Knowledge of Matlab Simulink for simulation and testing (preferred). Soft Skills: Strong leadership and team management abilities to lead small teams independently. Excellent problem-solving, debugging, and analytical skills. Effective communication skills to collaborate with cross-functional teams and provide technical training. Certifications/Training (Preferred): Certification in Embedded Systems, Automation, or Software Testing (e.g., ISTQB). Training in CAN protocol, BMS testing, or EMI/EMC standards. Key Competencies Expertise in black-box, unit, and integration testing for embedded systems. Ability to manage agile workflows and deliver high-quality software under tight deadlines. Proactive approach to detecting and resolving defects while ensuring compliance with industry standards.

Excellent command over programming languages C, C++. Excellent Control over Operating systems principles (Linux, VxWorks, QNX) Experience in programming in a multi-thread/multi-process environment Proficiency with Linux, Jira and Inter-process communication Design and implement tools to accelerate software system development and debug environments Participate and support in fixing issues arising from customer sites Analyze system scalability, interworking issues and perform root cause analysis of system issues Design and implement built-in diagnostics and test codes to help reliability and supportability Experience of development of distributed architecture systems with intercommunication. Communication over various physical layer devices like Serial, Ethernet, 1553, CAN, NMEA, ModBus, etc Knowledge of IP protocols, VLANs and Ethernet switching Hands-on software development experience in large complex software systems Excellent analytical, integration and debugging skills are necessary Very Good oral and written communication and multitasking skills are expected.

Qualification: Bachelor or Master of E&E Engineering, E&TC Engineering, or equivalent with design background 5-9 years of experience in Product development Technical Requirements: Programming Tools: STM Cube IDE / STM 32, TouchGFX Protocols: SPI, I2C, BLE, ADC, DAC, UART, USB, Ethernet, PCIe, etc. Development Process: Agile, SCRUM, V Model, etc Tools: Embedded C, C++, MATLAB, Simulink EDA and PCB Design: Dip Trace, Eagle, Altium Protocols: SPI,I2C, UART, USB, Ethernet etc Responsibilities: Logical algorithm for system architecture design and development. Develop and optimise firmware for STM32 microcontrollers, focusing on efficient and reliable operation of Medical Equipment components and systems. Design and implement motion controller firmware to ensure accurate and precise motion control for diagnostic instruments, utilising your expertise in motor control techniques. Collaborate with cross-functional teams including hardware engineers, software developers, and medical experts to design, develop, and test embedded software solutions Implement SPI and UART communication protocols to facilitate seamless communication between various components of the diagnostic devices. Proficiency in debugging tools: Using debuggers, oscilloscopes, logic analyzers, and JTAG for troubleshooting and optimization. Own SDLC Process and Embedded Electronics design life cycle process of new, existing medical equipments and its technology while focusing on product design, on-time updates & problem solving. Interact with clinicians, third-party vendors, manufacturers, sub-contractors, and direct reports to develop collaborative plans and complete projects. Experience: Experience in the Embedded software design lifecycle for sub-systems, comprising of high- speed electronics, High Speed integrated interfaces, and traceability to design requirements. Proficiency in communication protocols such as SPI and UART, with the ability to design and implement reliable communication interfaces. Experience working with real-time operating systems (RTOS) for embedded systems, ensuring timely and deterministic execution of tasks. Familiarity with medical device development standards and regulations (e.g., ISO 13485, IEC 62304) is a plus. Detail-oriented approach to writing clean, organised, and well-documented code. Prior experience in the medical device industry is advantageous but not mandatory. Role Type: Full Time, In-office, based out of our office in Bhiwadi. Should be ready to move anywhere in India or abroad. Should be ready to visit to Suppliers / Vendors and Customers if needed

Senior Developer Embedded Software Experience:- 4-9 years Roles and Responsibilities Experience in design and development with structured Software. Development Life Cycle for embedded applications Proficiency in C language or assembly programming, Micro controller, Micro Processor. Preferably experience of working and understanding in metering domain Proficiency in development processes, tools/IDE (KEIL, IAR, Eclipse) & test automation Unit testing skill Interface RS485, RS232, SPI, I2C, USB, LCD, Keypad, Flash, EEPROM Coding Standards and MISRA rules preferable Knowledge of ARM / MIPS / Coldfire / MSP430 / DSPIC / 8051 and other popular processor Experience of working on communication products based on GPRS, ZIGBEE, ZWAVE, Ethernet, Power line communication, DLMS, MODBUS Sound Knowledge on MISRA Guidelines Desired Candidate Profile Understand improvement requirement and develop improvement solution & package, according to technical specifications / high level solution design Responsible to carry out effective and timely unit testing, in order to, deliver first time right solutions Development of automation framework / compiler / emulators to speed up business delivery cycle in NPI programs Proficiency in developing embedded software design with high reusability using relevant tools and BSM or flow diagram Job Benefits & Perks Amazing work life balance and lifetime learning opportunity Please share your profile with hussaina.barkat@securemeters.com

Exp in microcontroller circuit design, ADE, PWM, TIMERS, GPIO, CANBUS 2. OB, SPI, WDG using various sensors, Motor controller drive (BLDC, PMSM), Product Highspeed board, exp. in power electronics, Analog, Digital, Mixed signal design, EMI/EMC & BOM Required Candidate profile BE in Electronics/instrumentation, Minimum 2 to 3 years of exp.

Roles : IoT/Embedded Security Engineer Location: Whitefield Bangalore Position Overview: We are seeking a highly skilled and motivated IoT / Embedded Security Engineer to join our team. The ideal candidate must have a strong background in IoT / embedded systems security, with a proven track record in identifying vulnerabilities and implementing robust security measures. Roles and Responsibilities: Conduct security assessments and risk analysis of embedded medical devices. Develop and implement security protocols and solutions for medical devices. Design and execute penetration testing and vulnerability assessments. Research and stay updated on emerging threats, vulnerabilities, and security trends in IoT and embedded systems. Collaborate with cross-functional teams to integrate security measures into the development lifecycle of products. Provide technical guidance and support to internal teams on security best practices. Participate in the design and architecture of secure IoT and embedded systems. Mandatory Skills: Bachelor's or Master's degree in Electrical Engineering, Computer Science or Electronic field. Proven experience (5 years) in IoT and embedded systems security. Strong knowledge of IoT protocols (e.g., UART, I2C, JTAG, MQTT, CoAP, HTTP) and embedded system architecture Experience with reverse engineering ARM/MIPS/x86 code architecture. Hands on with hardware attacks such as PCB reversing, Component identification,Side channel attacks,memory extraction methods. Knowledge of radio frequency (RF) protocols and related security implications such as BLE, WIFI, LoRa,DSP, SDR, etc. Understanding of industrial IoT (IIoT) security considerations. Experience with various hardware security assessment tools/frameworks. Familiarity with hardware security concepts such as secure boot, encryption, and secure firmware updates. Proficiency in programming languages commonly used in embedded systems (C/C++, Python). Proactive, problem-solver and the ability to work independently and within a team. Good to Have: Understanding of cryptographic algorithms and protocols. Knowledge of exploit development techniques, buffer overflows, and other memory corruption vulnerabilities applicable to embedded systems. Knowledge of secure coding practices and principles specific to embedded systems, including memory management and input validation. Familiarity with regulatory compliance and standards in IoT security. Any certification in IoT security, Embedded device security or similar, is a plus. Notice Period- Immediate Joiner to 15 Days Maximum Interested candidates kindly share your updated cv at sanchit@mounttalent.com

Project Role :Software Development Engineer Project Role Description :Analyze, design, code and test multiple components of application code across one or more clients. Perform maintenance, enhancements and/or development work. Must have skills :Advanced Embedded System Engineering Good to have skills :Linux,C++ Programming Language Minimum 10+ year(s) of experience is required Educational Qualification :Any Engineering degree Key Reponsibilities :Proficient in Embedded System design development, System Architecture Design:Collaborate with cross-functional teams, including engineers, product managers, and stakeholders, to define the overall system architecture for automotive software Requirements Analysis:Analyze and understand the functional and technical requirements of automotive systems and translate them into software architecture and design specifications Proficient in Architecting end to end Embedded product Experience in Embedded Software Development using C/C/CPP; RTOS; developing Software for Electronic Control units Experience in Yocto, Embedded Linux Technical Experience :Free RTOS Good knowledge on connectivity protocols like BT, WiFi Experience working with Micro-controllers/processors Good experience in Requirement elicitation, deriving system requirements to software requirements Commitment to quality and high standards Knowledge of Requirements DOORS/Polarion etc and Configuration Management Tools git, SVN, etc Knowledge in Agile based development methodology. Knowledge in complete V-model for ECU Development project. Knowledge in Telematic Control Unit. Knowledge on Touch GFXGood knowledge of the ISO26262 functional safety standards and implementation in compliance with the chosen standards. Professional Attributes :Should be project lead

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Advanced Embedded System Engineering Good to have skills : NA Minimum 5 year(s) of experience is required Educational Qualification : This position requires a BS in engineering with knowledge of materials science Summary :As an Application Lead in Custom Software Engineering, you will be responsible for leading the development of advanced embedded system engineering solutions. Your typical day will involve utilizing your expertise in advanced embedded system engineering to design and implement innovative solutions for our clients in Bengaluru. Roles & Responsibilities: Lead the development and deployment of advanced embedded system engineering solutions for our clients. Collaborate with cross-functional teams to design and implement innovative solutions that meet client requirements. Provide technical leadership and guidance to junior team members. Stay updated with the latest advancements in advanced embedded system engineering and integrate innovative approaches for sustained competitive advantage. Professional & Technical Skills: Must To Have Skills:Expertise in Advanced Embedded System Engineering. Strong understanding of software engineering principles and practices. Experience with programming languages such as C, C++, and Assembly. Experience with microcontroller architectures such as ARM, AVR, and PIC. Experience with communication protocols such as SPI, I2C, and UART. Additional Information: The candidate should have a minimum of 5 years of experience in Advanced Embedded System Engineering. The ideal candidate will possess a strong educational background in Computer Science, Electrical Engineering, or a related field, along with a proven track record of delivering impactful solutions. This position is based at our Bengaluru office. Qualification This position requires a BS in engineering with knowledge of materials science

Project Role : Application Developer Project Role Description : Design, build and configure applications to meet business process and application requirements. Must have skills : React.js Good to have skills : NA Educational Qualification : 15 Project Role :Application Developer Project Role Description :Design, build and configure applications to meet business process and application requirements. Must have Skills :React.jsGood to Have Skills : Job Requirements :Key Responsibilities :Lead the design development and implementation of highquality applications using Reactjs Collaborate with crossfunctional teams to ensure timely delivery of applications that meet business requirements Provide technical guidance and mentorship to team members ensuring adherence to best practices and standards Identify and mitigate technical risks ensuring the stability and scalability of applications Technical Experience :Professional and Technical Skills Proficiency in Reactjs Strong understanding of Front End Development best practices and standards Professional Attributes :Good Communication skills Educational Qualification:15 Additional Information : Qualification 15

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Oracle Financials Cloud Good to have skills : NA Minimum 3 year(s) of experience is required Educational Qualification : Minimum 15 years of fulltime education Summary :As an Application Lead for Oracle Financials Cloud, you will be responsible for leading the effort to design, build, and configure applications. You will act as the primary point of contact and work with cross-functional teams to ensure successful project delivery. Your typical day will involve utilizing your expertise in Oracle Financials Cloud to provide technical guidance and support to the team. Roles & Responsibilities: Lead Oracle Finance Module for large implementation projects Ability to drive client design sessions, understand data migration requirements and provide conversion architecture and roadmap Plan and execute the various steps in conversions extractions, validations, transformations, load and reconciliation Lead application configurations and client workshops Professional & Technical Skills: Must To Have Skills:Expertise in Oracle Financials Cloud. Good to have AR, AP, GL, Intercompany, FA, Tax modules Ability handle one or more complete process flows P2P, I2C, R2R Excellent Communication Skills, Stakeholder Management is essential for this role Qualification Minimum 15 years of fulltime education

Design verification plans and develop, maintain UVM testbench components. Gain a deep understanding of the design and testbench under your responsibility. Build UVM testbenches, including writing tests, sequences, checkers, scoreboards, and verification/coverage plans. Take ownership of task definition, effort estimation, and progress tracking. Contribute to the improvement and evolution of GPU verification methodologies. Take ownership of coverage closure and provide verification metric reports. About you You\u0027ll have: Experience in developing and maintaining verification components. Strong proficiency in SystemVerilog, UVM, and constrained-random verification methodologies. Skilled in debugging and identifying root causes of issues. Effective communication of technical issues, both verbally and in writing. You might also have: Knowledge of Graphics, GPU, CPU, or SoC architectures. Experience with broader verification technologies, including formal property-based verification (FPV). Proficiency in coding and scripting using Python, TCL, Perl, SystemC, or C++

About The Role : The main responsibilities of the job includes: Define, develop, and perform functional validation for GPUs in post-silicon environment, focusing on validation of PCIe in the context of discrete GPU. The job requires: Ability to capture analyzer traces and debug, ability to use exerciser for compliance. Ability to debug CV5 compliance issues. Ability to understand high-level spec and correspondingly develop test plan, test content and debug scripts, etc. Driving PO execution and debugs. Familiarity with compliance workshop and ability to debug issues across multiple hosts. Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. Minimum Qualifications: Bachelor's degree in Computer Engineering, Computer Science, Electrical Engineering, or related STEM degree plus 8+ years of industry experience, OR Master's degree in Computer Engineering, Computer Science, Electrical Engineering, or related STEM degree plus 6+ years of industry experience The years of experience mentioned above must include: PCIe post-silicon validation. Debugging PCIe functional and compliance issues Preferred Qualifications: Experience in driving post-silicon validation as technical lead Experience in GPU post-silicon validation Experience in engaging activities in compliance workshop. Inside this Business Group The Client Computing Group (CCG) is responsible for driving business strategy and product development for Intel's PC products and platforms, spanning form factors such as notebooks, desktops, 2 in 1s, all in ones. Working with our partners across the industry, we intend to deliver purposeful computing experiences that unlock people's potential - allowing each person use our products to focus, create and connect in ways that matter most to them. As the largest business unit at Intel, CCG is investing more heavily in the PC, ramping its capabilities even more aggressively, and designing the PC experience even more deliberately, including delivering a predictable cadence of leadership products. As a result, we are able to fuel innovation across Intel, providing an important source of IP and scale, as well as help the company deliver on its purpose of enriching the lives of every person on earth.

Job Overview: As an Automotive Embedded Developer/Specialist, you will be responsible for designing, developing, testing, and maintaining embedded software for automotive systems. You will collaborate with cross-functional teams to ensure the successful integration of software components into the overall vehicle architecture. Your work will contribute to the development of cutting-edge automotive technologies, ensuring safety, reliability, and performance. Responsibilities: Design and implement embedded software solutions for automotive applications, considering safety, real-time constraints, and performance requirements. Develop low-level software components for microcontrollers, processors, and other embedded systems. Develop AUTOSAR BSW modules in compliance with project requirements. Implement Firmware for communication protocols (CAN, LIN, SPI, UART, Ethernet, etc.) for seamless interaction between embedded systems in the vehicle. Analyze and understand software requirements, specifications, and system architecture to create efficient and effective embedded solutions. Collaborate with hardware engineers and system architects to integrate software components into the overall vehicle system. Conduct thorough testing, debugging, and validation of embedded software to ensure functionality and reliability. Implement safety-critical software features and adhere to automotive safety standards (ISO 26262). Create and maintain detailed documentation, including design documents, code comments, and test plans. Work closely with cross-functional teams, including hardware engineers, system engineers, and quality assurance teams, to achieve project goals. Experience: 3-8 Years Qualifications: Bachelor's or higher degree in Computer Science, Electronics, Electrical Engineering, or related field. Proven experience in embedded software development, preferably in the automotive industry. Hands-on experience with AUTOSAR BSW development. Hands-On experience with Autosar Mode Management (ECUM, BSWM, CanIF, CanNM, CanSM). Hands-on Experience or Knowledge of Boot Loader software development. Proficiency in programming languages such as C and assembly language. Familiarity with embedded systems, microcontrollers, and real-time operating systems (RTOS). Strong hands on experience in automotive communication protocols (CAN, LIN, Ethernet). Understanding of automotive safety standards (ISO 26262) and cybersecurity principles. Strong problem-solving skills and attention to detail. Excellent communication and collaboration skills. Experience with Configuration& Requirement Management tools Experience with Automotive testing tools like INCA, CANalyser and UDE Strong debugging skills and the ability to use tools like oscilloscopes and JTAG debuggers Good knowledge on SW & MISRA warnings Good exposure for ASPICE standards Perks and benefits: Medical insurance Coverage of INR 5,00,000 Personal Accident Coverage of INR 25,00,000 Employee Provident Fund Employee Gratuity

Project Role : Application Lead Project Role Description : Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have skills : Edge Computing Good to have skills : Python (Programming Language) Minimum 12 year(s) of experience is required Educational Qualification : BE /BTech in MLAI or BE /BTech in any stream Post Graduation in MLAI Project Role :Application Lead Project Role Description :Lead the effort to design, build and configure applications, acting as the primary point of contact. Must have Skills :Edge Computing, SSI: NON SSI:Good to Have Skills :SSI:Python (Programming Language), C++ Programming Language NON SSI :Job Requirements :Key Responsibilities : Proficient in Python/Go languages for versatile programming. Strong foundation in Embedded Linux (C/C++/Python) on various Embedded Linux platforms (Yocto, ROS, Ubuntu). Comprehensive knowledge of AI/ML frameworks for Edge Gateway Devices. Skilled in Connected Device Semantics, Streaming Data Analytics, and hands-on experience with Azure Stack Edge/AWS Snowball Edge for Edge computing solutions.Technical Experience :-Proficiency in architecting Mass OTA & FOTA solutions with either custom or OSS.-Practical experience in implementing Edge Model Monitoring & Management.-Expertise in defining Device Control and Security Lockdown policies for Edge Devices, specifically tailored for Yocto/Ubuntu/Android/Windows IoT Core. Professional Attributes :Must have good communications skills and ability to manage the team membersMust be able to produce clear and concise documentation including requirements documents, design specs, status reports, system documentation and emails Must have proven track record of technical leadership roles delivering sEducational Qualification:BE /BTech in MLAI or BE /BTech in any stream Post Graduation in MLAIAdditional Info :Connected Device Streaming data analytics Experience in Azure Stack Edge or AWS Snowball Edge Qualification BE /BTech in MLAI or BE /BTech in any stream Post Graduation in MLAI

SUMMARY Order - to - Cash Processor Our client, a global professional services company, is seeking a detail-oriented and organized professional to join their team as an Order-to-Cash Processor. The successful candidate will be responsible for efficiently managing the entire Order-to-Cash process, ensuring timely order processing, accurate invoicing, and prompt collection of payments. This role requires a strong background in order fulfillment, billing, and accounts receivable management. Responsibilities Order Processing: Receive and review customer orders for accuracy and completeness. Coordinate with various departments to ensure timely and accurate order fulfillment. Generate and validate invoices based on the orders processed. Invoicing: Create and distribute invoices to customers in accordance with established billing cycles. Verify billing details, pricing, and terms to ensure accuracy. Address any discrepancies or issues with invoices promptly. Accounts Receivable: Monitor and track customer payments to ensure timely collection. Investigate and resolve payment discrepancies or issues. Generate and analyze aging reports to identify overdue accounts. Customer Communication: Communicate with customers regarding order status, billing inquiries, and payment reminders. Provide excellent customer service and address customer concerns or inquiries. Credit Management: Assess and review customer creditworthiness. Establish and monitor credit limits for customers. Collaborate with the credit department to manage credit-related issues. Documentation: Maintain accurate and up-to-date records of customer transactions and interactions. Ensure compliance with company policies and regulatory requirements. Requirements Requirements: At least 1 year of relevant experience in Order To Cash (OTC). Qualification: Any Graduate. Work location- Noida, UP Benefits Salary 25K CTC Both way cab PF+ESI Cab Facility

About The Role : Experience in Automotive embedded software development Excellent C++ 11/14 programming skills Excellent Knowledge of Adaptive Autosar Layered Architecture and Function Clusters Experience in Adaptive Autosar BSW stack integration, configuration and developing adaptive applications Experience with Board Bringup, integrating and configuring Bootloaders Experience with working on Building and Configuring RTOS/OS such as QNX/Linux Primary Skills: Adaptive Autosar Advance c++ (11,14,17) Linux Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications.1. Applies scientific methods to analyse and solve software engineering problems.2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance.3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers.4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectations for the applicable role, as defined in Professional Communities.5. The software engineer collaborates and acts as team player with other software engineers and stakeholders. Skills (competencies) Verbal Communication C++ Linux

About The Role : At least 8-9 years of experience in Autosar development Min 8-9 years experience working with Classic AUTOSAR software development. Classic Autosar experience on minimum two stacks CAN / Ethernet / Diag / NVM / others. Experince in braking system. Proficiency in C/C++ programming in a multi-process, multi-threaded development environment Primary Skills: Embedded Software development Classic Autosar Proficiency in C/C++ programming Breaking System Secondary Skills: Enterprise architecture Design architecture Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications.1. Applies scientific methods to analyse and solve software engineering problems.2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance.3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers.4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectations for the applicable role, as defined in Professional Communities.5. The software engineer collaborates and acts as team player with other software engineers and stakeholders. About The Role : - Grade Specific Has very deep understanding of software development principles and technical proficiency. Masters all phases of the software development lifecycle and drives innovation and industrialization. Works on highly complex tasks and problems and drives technical decisions at a high level. Clear evidence of thought leadership in the market. Builds, educates and integrates effective teams. Focuses on developing long term partnerships with clients. Takes full responsibility for outcomes. Has strong understanding of contractual, financial and technical considerations. Exhibits strong commercial management skills. Takes a high degree of responsibility and ownership of people issues. Skills (competencies) Verbal Communication

About The Role : At least 8+ years of experience in Embedded SW development / architecture Min 5 years experience working with Classic or Adaptive AUTOSAR software architecture design Classic Autosar experience on minimum two stacks CAN / Ethernet / Diag / NVM / others. Adaptive Autosar experience on minimum two SWCL COM / DM / EM / PER / others Proficiency in C/C++ programming in a multi-process, multi-threaded development environment Primary Skills: Adaptive Autosar Proficiency in C/C++ programming Rhapsody Enterprise architecture Design architecture Works in the area of Software Engineering, which encompasses the development, maintenance and optimization of software solutions/applications.1. Applies scientific methods to analyse and solve software engineering problems.2. He/she is responsible for the development and application of software engineering practice and knowledge, in research, design, development and maintenance.3. His/her work requires the exercise of original thought and judgement and the ability to supervise the technical and administrative work of other software engineers.4. The software engineer builds skills and expertise of his/her software engineering discipline to reach standard software engineer skills expectations for the applicable role, as defined in Professional Communities.5. The software engineer collaborates and acts as team player with other software engineers and stakeholders. Skills (competencies) Verbal Communication C++ Linux

Kindly share the resume to suhasini.swamy@quest-global.com Job Requirements: Good team player and must be able to work independently. Take the ownership and lead in team building, design, development/porting & validation of system software (Linux, RTOS, Android etc.) in target board. Provide technical inputs to prepare project scope, schedule and cost etc. Guide and mentor the technical leads to deliver commitments on time with Quality. Provide technical solutions for the team Interact with customers on the project technical aspects and prepare and present the project technical progress Co-ordinate and collaborate with onsite support members and communicate the requirements to the offshore team Enhance customer satisfaction by ensuring appropriate engagement Predict project risks and develop mitigation plans Work Experience: Strong C/C++ programming skills Experience in SoC and microcontroller architecture. Good exposure to Linux kernel and driver architecture. Good knowledge in Android internals, Android framework, services, HAL etc. Strong understanding in bootloaders. Experience in RTOS and bare metal firmware design and development activities. Expertise in board bring up, device driver development, interrupt handling etc. Experience in IPs like DMA, CAN, UART, I2C, PCIE, Ethernet, USB, Camera, Display etc. Good debugging skill. Experience in performance and power optimization Experience in Automotive domain. Experience in virtual platform and digital twin. Experience in hypervisors Experience in AutoSAR. Electronics knowledge and basic trouble shooting skills on hardware development boards. • Experience using test equipment to debug the hardware software interface.

1. Position 1: Software Design Engineer Location: Bangalore Professional Skills Required: C Concepts & Programming, OS Concepts, Computer Architecture/Organization, Networking (TCP&UDP/OSI Model), debug/problem solving skills Desired Skill Set: Linux, Device Drivers, embedded protocols (eg: SPI,I2C etc), RTOS Concepts Job Description: Requirements gathering Design and Reviews Standalone SW bring up/porting Linux onto different platforms Various driver porting/development and testing along with application Good documentation skills for creating documents like requirements/design etc documents. Co-ordinate with Lead and other team members to deliver the work on time 2. Position 2: Senior Software Design Engineer. Location: Bangalore Professional Skills Required: Linux, Device Drivers, embedded protocols (eg: PCIe, SPI, I2C etc), RTOS Concepts and Processor Knowledge Job Description: Requirements gathering Design and Reviews Standalone SW bring up/porting Linux/RTOS onto different platforms Various driver porting/development and testing along with application Good documentation skills for creating documents like requirements/design etc documents Co-ordinate with Lead and other team members to deliver the work on time

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: Additional About The Role : As verification engineer candidate will be responsible to manage UFS/Ethernet/PCIe/high speed IP verification at one or more SoC (System On Chip) during project work. Responsibilities : Understand the design specification and implementation, define the verification scope, develop test plans, tests, and the verification infrastructure and verify the correctness of the design. Responsible to implement and analyze system Verilog assertion and coverage(code, toggle, functional) . Work alongside other members of the verification team to analyze, develop and execute verification test cases and able to provide relevant solution to issue. Collaborate with architects, designers, and pre and post silicon verification teams to accomplish your tasks. Adhere to quality standards and good test and verification practices. B.E/B. Tech/M.E/M. Tech in electronics with 5+ year experience in verification domain. Prior work experience on IP level or Soc level. Prior work on UFS (Universal Flash Storage),Ethernet and PCIe Protocol is desirable. Good understanding of processor based Soc level verification which includes native ,Verilog ,system Verilog and UVM mix environment. Hand on experience with verification tools such as VCS, waveform analyzer and third party VIP integration (such as Synopsys VIPs). Hands on experience in UVM. C/C++ ,System Verilog verification language. Good understanding of AXI-AMBA protocol variants. Can work with scripting language (shell, Makefile, Perl ) Strong understanding of design concepts and ASIC flow. Good problem solving , analytical and debugging skill is must. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 8+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 7+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 6+ years of Hardware Engineering or related work experience. Applicants : Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies : Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Candidates with 0.6 - 2 years of experience in US mortgage specializing in Active or Default servicing jobs. (Specifically towards Tax, Cashiering, Pre Foreclosure, Foreclosure, Bankruptcy, Loss Mitigation, and Default Claims areas) Fresher with good analytic and communication skills can be considered Good typing speed Willingness to learn, is trainable and is a problem solver Attention to detail- Has to be accurate on numbers and deliver tasks assigned in timely manner Willing to work in night shifts (US hours) About The Role : Role Purpose The purpose of the role is to provide effective technical support to the process and actively resolve client issues directly or through timely escalation to meet process SLAs Do Support process by managing transactions as per required quality standards Fielding all incoming help requests from clients via telephone and/or emails in a courteous manner Document all pertinent end user identification information, including name, department, contact information and nature of problem or issue Update own availability in the RAVE system to ensure productivity of the process Record, track, and document all queries received, problem-solving steps taken and total successful and unsuccessful resolutions Follow standard processes and procedures to resolve all client queries Resolve client queries as per the SLAs defined in the contract Access and maintain internal knowledge bases, resources and frequently asked questions to aid in and provide effective problem resolution to clients Identify and learn appropriate product details to facilitate better client interaction and troubleshooting Document and analyze call logs to spot most occurring trends to prevent future problems Maintain and update self-help documents for customers to speed up resolution time Identify red flags and escalate serious client issues to Team leader in cases of untimely resolution Ensure all product information and disclosures are given to clients before and after the call/email requests Avoids legal challenges by complying with service agreements Deliver excellent customer service through effective diagnosis and troubleshooting of client queries Provide product support and resolution to clients by performing a question diagnosis while guiding users through step-by-step solutions Assist clients with navigating around product menus and facilitate better understanding of product features Troubleshoot all client queries in a user-friendly, courteous and professional manner Maintain logs and records of all customer queries as per the standard procedures and guidelines Accurately process and record all incoming call and email using the designated tracking software Offer alternative solutions to clients (where appropriate) with the objective of retaining customers and clients business Organize ideas and effectively communicate oral messages appropriate to listeners and situations Follow up and make scheduled call backs to customers to record feedback and ensure compliance to contract /SLAs Build capability to ensure operational excellence and maintain superior customer service levels of the existing account/client Undertake product trainings to stay current with product features, changes and updates Enroll in product specific and any other trainings per client requirements/recommendations Partner with team leaders to brainstorm and identify training themes and learning issues to better serve the client Update job knowledge by participating in self learning opportunities and maintaining personal networks Deliver No Performance Parameter Measure 1 Process No. of cases resolved per day, compliance to process and quality standards, meeting process level SLAs, Pulse score, Customer feedback 2 Self- Management Productivity, efficiency, absenteeism, Training Hours, No of technical training completed Candidates with 0.6 - 2 years of experience in US mortgage specializing in Active or Default servicing jobs. (Specifically towards Tax, Cashiering, Pre Foreclosure, Foreclosure, Bankruptcy, Loss Mitigation, and Default Claims areas) Fresher with good analytic and communication skills can be considered Good typing speed Willingness to learn, is trainable and is a problem solver Attention to detail- Has to be accurate on numbers and deliver tasks assigned in timely manner Willing to work in night shifts (US hours)

Skills : Strong understanding for the BSW layer modules such as comm stack, diag stack, NVM, CDD etc. Good understanding of MBD tool for application SW development such as Matlab/Simulink. Hands on experience in Application and Base software integration using Vector tool chains (Davinci). Work experience with projects adhering to ISO26262 and ASPICE is a must. Experice in Development using Embedded C/C++, Expericed in static analysis and component level testing Skilled in code reviews, code styling and quality checks, understanding of the coding guidelines for C and C++ for Embedded applications Strong skills in Understanding of compliers and debugging on virtual and real (HW) targets Sound understanding of embedded microcontrollers Skilled using AUTOSAR Configuration and Development tools and adating the SIPs for the project needs Tools: Mandatory: Experience in requirements engineering tool (Ex. Polarion), ALM tool (Ex. JIRA), Embedded C,C++, BSW Implementation, Firmware and low level device drivers, Vector DaVinCi Configurator and Developer, VectorCast for Unit Testing, Polyspace or something similar, Lauterbach Debugger or any other debugger, Strong Debugging skills Good to Have: Infineon Aurix, AZURE DevOps (CI/CD),