125 Board Bringup Jobs - Page 4

Responsibilities: 1. Product Delivery ownership of Board Support Packages and driver development. 2. BSP and Drivers development for Linux on Renesas, NXP and TI Platforms. 3. Design and implementation of system recovery module 4. Board bring up, Schematic review and working with h/w team on new board design. 5. Debug and troubleshoot BSP and Driver level issues. Should be familiar with hardware debugging. 6. Ability to work on applications will be an advantage Requirement: Relevant experience of 5+ years in Embedded Linux Development. Hands on Software Development experience in C/C++. Experience in Linux BSP Development for different platforms Experience in Embedded Development in C, C++ & Python Linux Kernel internals, Device driver implementation. Hands on experience with Yocto for atleast two commercial products Experience in initial board bring up on new hardware, preferably for Renesas, NXP, TI etc. processors. Experience in Customization bootloader and Linux operating system for embedded platforms. Experience in porting board support packages from reference platform. Experience writing custom device drivers and related SDKs/APIs. Candidate should be fully conversant in studying hardware schematics, component/module datasheets. Candidate should be fully conversant in using test equipments like CRO, logic analyzers, data loggers etc. Review of hardware schematics and support the hardware design with low- level software components. Experience with software firmware verification and testing and generating high quality documentation of the design and test results. Candidate should be fully conversant with preparing and understanding pin-muxing arrangements of the hardware Candidate should have worked on IIC, SPI, UART, RTC, Ethernet, Flash, DDR RAM and other high-speed digital interfaces.

Job Description : Linux Kernel Device driver development Audio, Camera, Graphics, Display. Board bring up, Kernel Migration and Migration. Hardware configuration and performance tuning. Skills Required : Seasoned embedded systems engineer - with focus on Linux, QNX, system side, drivers framework and low level embedded experience. Strong C and assembly programming skills Understanding of ARM architecture. Hands on troubleshooting issues on Hardware. Experience on writing BSP without any references Experience on designing & implementation of driver frameworks without GPL references. Strong communication and inter-personal skills. Proficient in multi-threaded programming and middleware solution development on Android environment. Strong in fundamentals of IPC and OS concepts. Creative problem-solver capable of creating and reproducing complex software defects. Good experience in Linux internals (QNX IVI Car preferred) OS build, System level debugging

Responsibilities: * Collaborate with cross-functional teams on product development * Design, test & troubleshoot hardware solutions * Select components & manage BOMs

Roles and Responsibilities Design, develop, test, and maintain embedded software for various applications using C/C++ programming languages. Collaborate with cross-functional teams to identify requirements and implement solutions that meet customer needs. Develop device drivers for Linux devices and perform board bring-up activities using U-Boot. Troubleshoot issues related to Linux kernel programming and provide technical support as needed. Participate in code reviews to ensure high-quality standards are met. Desired Candidate Profile 2-5 years of experience in Embedded Software Engineering with expertise in BSP (Board Support Package), Device Driver Development, Linux Device Driver, Linux Internals, Linux Kernel Programming. Bachelor's degree in Computers or Electrical field; Master's degree preferred. Strong understanding of Linux Kernel concepts such as system calls, file systems, I/O operations etc. Interested Candidates share Resume to Prasadkaruturi@Mirafra.com

About Mistral: Mistrals software team is equipped to handle the challenging software requirements of state-of-the-art applications in consumer, industrial, aerospace and defense domain. Our teams expertise encapsulates the gamut of software development services including low-level software (assembly language), Firmware, Device Drivers, Board Support Packages to Middleware and Application Development for different hardware architectures and Embedded Linux, VxWorks, Android OS. Ideal key skills match with the below details: Protocol : I2C,SPI,Flash,UART, Ethernet, MIL1553, ARINC429, RS422,RS485 Tools : Xilinx SDK, Eclipse, Vitis, Quartus Prime, CCS Micro Controller: STM32, TI MCU, PIC Microprocessor: Xilinx (Zynq, MPSOC, RFSOC), PowerPC, Intel Atom, TI Sitara, GUI : QT/LabVIEW/Python OS: Windows, Linux, VxWorks, Peta Linux Mandatory Key skills: Firmware engineer, protocols, micro-controller, micro processor, MIL1553, ARINC429 Experience Range: 2 to 6 years Work Location: Bangalore

We are looking for a skilled Linux Kernel + Bootloader professional with 4 to 6 years of experience. The ideal candidate will have expertise in Linux Kernel, C, Bootloader, U-boot, Embedded board bringup, and Shell scripting. This position is located in Bangalore. Roles and Responsibility Design, develop, and test Linux kernel modules and drivers. Develop and maintain bootloader code for various platforms. Collaborate with cross-functional teams to integrate Linux kernel and bootloader components. Troubleshoot and debug issues related to Linux kernel and bootloader. Optimize system performance and ensure high-quality code. Participate in code reviews and contribute to improving overall code quality. Job Strong knowledge of Linux kernel development and architecture. Proficiency in C programming language and shell scripting. Experience with bootloader development and embedded systems. Familiarity with U-boot and other relevant technologies. Excellent problem-solving skills and attention to detail. Ability to work collaboratively in a team environment.

Project Engineer (Design) - Traction Power Supply Systems - Rail Electrification We are looking for a Project Engineer (Design) Traction Power Supply Systems Rail Electrification . Meeting the need for smart-mobility solutions We are making the lives of people who travel easier and more enjoyable while constantly developing new, intelligent mobility solutions. Your new tasks Exciting and future oriented Design responsibility for complete DC Traction Power Supply Equipment within a project with reference to ANSI/IEEE Standards. Preliminary and detail design of DC Traction Power Supply (TPS) substations for electrical railway system. Preparation of detailed electrical engineering drawings of electrical systems and components incl. SLD, general arrangement drawings and overviews, bill of materials, etc. Technical design interface between sub-systems of all DC Traction Power Supply Equipment within the substation review and release of complete DC substation design in each project phase Technical management, planning and controlling of own engineering work package Interaction with sales departments and project management during both, the bid phase, and the project realization phase Technical clarifications with sub-suppliers abroad. Technical support of the manufacturing and the commissioning engineers concerning analysis of technical problems and answering of technical inquiries Participation in technical liaison meetings with customers, suppliers, and Siemens internal departments overseas Your qualification Well-grounded and adequate Design responsibility for complete DC Traction Power Supply Equipment within a project with reference to ANSI/IEEE Standards. Preliminary and detail design of DC Traction Power Supply (TPS) substations for electrical railway system. Preparation of detailed electrical engineering drawings of electrical systems and components incl. SLD, general arrangement drawings and overviews, bill of materials, etc. Technical design interface between sub-systems of all DC Traction Power Supply Equipment within the substation review and release of complete DC substation design in each project phase Technical management, planning and controlling of own engineering work package Interaction with sales departments and project management during both, the bid phase, and the project realization phase Technical clarifications with sub-suppliers abroad. Technical support of the manufacturing and the commissioning engineers concerning analysis of technical problems and answering of technical inquiries Participation in technical liaison meetings with customers, suppliers, and Siemens internal departments overseas

Responsibilities: * Develop platform software using C++ and Linux kernel. * Implement board bring-up with bootloader and networking protocols. * Design device drivers for telecom/ISP industry devices.

Responsibilities: * Design, select components, bring up boards, troubleshoot issues * Collaborate with cross-functional teams on DFM & analog circuit design * Create schematics, mixed signal designs, BOMs

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: HW Preferred Qualifications: Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 1+ year of experience with circuit design (e.g., digital, analog, RF). 1+ year of experience utilizing schematic capture and circuit simulation software. 1+ year of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc. Principal Duties and Responsibilities: Applies Hardware knowledge to assist in the planning, optimization, verification, and testing of electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems. Provides support for the integration of features and functionality into hardware designs in line with proposals or roadmaps. Assists in conducting simulations and analyses of designs as well as with the implementation of designs with the best power, performance, and area. Collaborates with team members to assist in the implementation of new requirements and incorporation of the latest test solutions in the production program to improve the yield, test time, and quality. Assists in the evaluation, characterization, and development of manufacturing solutions for leading edge products in processes and bring up product to meet customer expectations and schedules. Assists in the evaluation of reliability for materials, properties, and techniques and brings innovation, automation, and optimization to maximize productivity. Assists in the assessment of common design features to identify potential flaws, compatibility issues, and/or compliance issues. Writes technical documentation for Hardware projects. Level of Responsibility: Works under supervision. Decision-making affects direct area of work and/or work group. Requires verbal and written communication skills to convey basic, routine factual information. Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. Preferred Qualifications: Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 8+ years of Hardware Engineering or related work experience. 2+ years of experience with circuit design (e.g., digital, analog, RF). 2+ years of experience utilizing schematic capture and circuit simulation software. 2+ years of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc. 1+ year in a technical leadership role with or without direct reports. Principal Duties and Responsibilities: Leverages advanced Hardware knowledge and experience to plan, optimize, verify, and test critical electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems. Integrates complex features and functionality into hardware designs in line with proposals or roadmaps for complex products. Conducts complex simulations and analyses of designs as well as implements designs with the best power, performance, and area. Collaborates with cross-functional teams (e.g., design, verification, validation, software and systems engineering, architecture development teams, etc.) to implement new requirements and incorporate the latest test solutions in the production program to improve the yield, test time, and quality. Evaluates, characterizes, and develops the novel manufacturing of solutions for leading edge products in the most advanced processes and bring-up product to meet customer expectations and schedules. Evaluates reliability of critical materials, properties, and techniques and brings innovation, automation, and optimization to maximize productivity. Evaluates complex design features to identify potential flaws, compatibility issues, and/or compliance issues. Writes detailed technical documentation for complex Hardware projects. Level of Responsibility: Works independently with minimal supervision. Provides supervision/guidance to other team members. Decision-making is significant in nature and affects work beyond immediate work group. Requires verbal and written communication skills to convey complex information. May require negotiation, influence, tact, etc. Has a moderate amount of influence over key organizational decisions.

Job Area: Engineering Group, Engineering Group > Software Engineering General Summary: 10+ years of experience in the embedded domain to design, develop and support software solutions on multi-core ARM (V7A or V8A)/CPUs, Strong C/C++ programming skills. Embedded Platforms experience including low-level firmware, kernel (Linux or QNX), Hypervisor/Virtualization and user-space components. Design and development of software for heterogeneous compute platforms consisting of ARMs, GPUs, DSPs, and specialized hardware accelerators in an embedded SoC systems with J-TAG or ICE debuggers. Experience in real-time SW development for embedded products. Hands-on experience using JTAG to debug real-time problems Hands-on experience using different version control systems like perforce, GIT Expertise in Development of PCI RC/EP Device Driver. Expertise in writing kernel space device drivers in areas of MMU, Power(clocks/thermal). Solid understanding of Linux/QNX boot flow on embedded systems. Solid understanding of computer system architecture (core, cache, memory models, bus architecture, etc.). Experience in Board Bring-up, Device drivers, peripheral buses (SPI, I2C, USB), Memory controller DDR, eMMC, UFS and Performance. Solid understanding of different debug methods offered by Linux Kernel/QNX. Motivated self-starter with excellent verbal and written communication skills, demonstrated ability to work with engineers/partners/customers across different geographies. Hands-on technical lead who is not hesitant to dig into the details where needed to get first-hand knowledge of the issues and play an active and personal role in steering team success Collaborate with internal teams and external partners on analysis and debugging. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field.

Person at this position takes ownership of a module and associated quality and delivery. Person at this position provides instructions, guidance and advice to team members to ensure quality and on time delivery. Person at this position is expected to be able to instruct and review the quality of work done by technical staff. Person at this position should be able to identify key issues and challenges by themselves, prioritize the tasks and deliver results with minimal direction and supervision. Person at this position has the ability to investigate the root cause of the problem and come up alternatives/ solutions based on sound technical foundation gained through in-depth knowledge of technology, standards, tools and processes. Person has the ability to organize and draw connections among ideas and distinguish between those which are implementable. Person demonstrates a degree of flexibility in resolving problems/ issues that atleast to in-depth command of all techniques, processes, tools and standards within the relevant field of specialisation. Roles & Responsibilities Responsible for requirement analysis and feasibility study including system level work estimation while considering risk identification and mitigation. Responsible for design, coding, testing, bug fixing, documentation and technical support in the assigned area. Responsible for on time delivery while adhering to quality and productivity goals. Responsible for traceability of the requirements from design to delivery Code optimization and coverage. Responsible for conducting reviews, identifying risks and ownership of quality of deliverables. Responsible for identifying training needs of the team. Expected to enhance technical capabilities by attending trainings, self-study and periodic technical assessments. Expected to participate in technical initiatives related to project and organization and deliver training as per plan and quality. Expected to be a technical mentor for junior members. Person may be given additional responsibility of managing people based on discretion of Project Manager. Education and Experience Required Engineering graduate, MCA, etc Experience: 5-8 years Competencies Description KERNEL AND DRIVERS - LINUX Engineer is one who has done one or more of the following on Embedded Linux: design, development/customization, bug fixing/sustenance who is familiar with one or more of the following Linux Kernel configuration;board bring up;device tree; porting/adapting device drivers; For Android specialization, following will be additional : Android patches/configuration; Android architecture Platforms- Mandatory to have worked on one or more of the following: Embedded Linux; ARMEmbedded Linux; x86/Intel Atom Technology Standard- NA Tools- Mandatory to have worked on one or more of the following Lauterbach; Build system-Makefile; Gerrit; Git Languages- Mandatory to have worked on one or more of the following C Specialization- POWER MANAGEMENT, PERIPHERALS, MEDIA , DISPLAY , CONNECTIVITY , DATA PROTOCOL, SECURITY, PERFORMANCE, ANDROID, CARRIER GRADE PLATFORM

FREE RTOS, SAFE RTOS, YOCTO LINUX Configuration, Setup, SW bring up Firmware bring up, driver development Application bring up, SW development experience in C, C++ Experienced in automotive embedded software development and validation Experience in virtual ECU development, SW bring up and validation Experience in using vECU tools from Level 1 to Level 3 AUTOSAR based vECU configuration and setup Good development experience in middleware, driver, HW abstraction layer Simulation of middleware, driver layer codes for testing of application layer Creation of software in Loop validation environment Validation of ECU SW against requirements Managing a group of technical team members and at the same time delivering technically Calibration, data management, AVL CRETA A2L, HEX file handling knowledge Electric and non electric powertrain knowledge MKS Integrity & CANape tool experience

Role & responsibilities Embedded C/C++ developers Firmware engineers (bootloaders, BSP) Linux kernel or driver developers SoC or board bring-up engineers Hardware-interfacing library developers This role is focused on developing libraries that interface directly with hardware, which implies deep involvement with: Device drivers Board Support Packages (BSP) Embedded libraries Possibly diagnostic tools or hardware abstraction layers Preferred candidate profile

1. Position 1: Software Design Engineer Location: Bangalore Professional Skills Required: C Concepts & Programming, OS Concepts, Computer Architecture/Organization, Networking (TCP&UDP/OSI Model), debug/problem solving skills Desired Skill Set: Linux, Device Drivers, embedded protocols (eg: SPI,I2C etc), RTOS Concepts Job Description: Requirements gathering Design and Reviews Standalone SW bring up/porting Linux onto different platforms Various driver porting/development and testing along with application Good documentation skills for creating documents like requirements/design etc documents. Co-ordinate with Lead and other team members to deliver the work on time 2. Position 2: Senior Software Design Engineer. Location: Bangalore Professional Skills Required: Linux, Device Drivers, embedded protocols (eg: PCIe, SPI, I2C etc), RTOS Concepts and Processor Knowledge Job Description: Requirements gathering Design and Reviews Standalone SW bring up/porting Linux/RTOS onto different platforms Various driver porting/development and testing along with application Good documentation skills for creating documents like requirements/design etc documents Co-ordinate with Lead and other team members to deliver the work on time

Job Title: Sr. Project Engineer/ Lead Engineer Experience: 3 to 7 years Location: Chennai, India Company: e-con Systems India Pvt Ltd About Us e-con Systems is a leading product-based company specializing in end-to-end embedded vision solutions. With pioneering contributions like the worlds first UVC-compatible USB 3.0 camera and the first standalone stereo camera, we continue to innovate for a global OEM customer base. Join us to engineer the future of vision technology. Qualifications Bachelor's or Master's degree in Electronics/Electrical Engineering 3 to 7 years of relevant experience in hardware product development Key Skills Strong fundamentals in electronics – transistors, op-amps, etc. Experience in DC-DC Power Supply design Expertise in High-Speed Design – both single-ended and differential signals Proficient in digital board design using microcontrollers/microprocessors Good exposure to: Interfaces : USB, UART, SPI, I2C, MIPI CSI, SDIO, RGMII, LVDS, GMSL, Ethernet Design Analysis : Load, timing, thermal Testing & Validation of hardware designs Familiar with tools like: Schematic entry – OrCAD PCB design – Allegro Gerber viewers – Any standard viewer Practical understanding of physical layer-level debugging Working knowledge of PCB layer stack-up , signal integrity, thermal simulation Understanding of EMI/EMC standards and compliance testing – ESD, EFT, RE, CE, RS, etc. Prior team handling or mentoring experience is a plus Roles & Responsibilities Collaborate with leads/customers to gather hardware requirements Evaluate and select appropriate components Perform detailed design analysis – thermal, timing, power Design schematics and generate optimized BOMs Coordinate with the PCB team to ensure: EMI/EMC and DFM guidelines are followed Oversee board bring-up, testing, and design validation Perform pre-compliance testing for EMI/EMC in external labs Facilitate handoff to production with proper documentation Plan production-level test strategies and support test jig development Resolve production-related technical issues post-deployment

Post : Hardware Engineer SE Job Description A senior hardware engineer shall be responsible for owning hardware designs from its early requirements stage to the production stages. Responsibilities start with requirements gathering, its documentation, architect designs to meet the requirement, Capturing the schematics, Review of schematics, Working with the layout team, BoM optimisation, Prototyping, Bring up of interfaces and debugging of boards. Electrical validation of signals Mandatory Skills Knows professional schematics design tools like - Altium Designer, Orcad Proficient with operating lab equipment like - DMM, DSO Experience with taking on projects from the Requirements stage to Prototyping Strong Circuits design and debugging skills (Opamp, Logic Gates ADC UART, I2C, SPI) Ability to work as a leader and a team player. Good Communication and Documentation Skills Nice to have RF design Analog design Thermal design Familiar with Simulation tools SCM Coordination Customer Interaction Soldering skills required for reworks FPGA and High speed design skills will be appreciated Experience with handling production orders About GadgEon: Gadgeon Smart Systems is an end-to-end Product Engineering and IoT Solution Development Partner in the Digital Transformation Journey of our customers. We are an ISO 9001:2015 certified company. Established in 2011 and has over 70+ satisfied customers across the USA, Europe, Australia, Middle East, and India. Gadgeon-Europe started its operations in 2019 to cater to the specific demands of our European customers. We are proud to have a track record of very low talent attrition over the years. Our extensive experience in end-to-end IoT, IIoT, M2M technologies, network/communication technologies, application management, cloud, analytics, and automation frameworks enable our customers in building new business models and realizing value from their IoT and digital transformation journey. Please go through the following link for details regarding GadgEon. https://www.gadgeon.com/about-us/

Roles & Responsibilities Supporting in development of new product, re-design and value engineering of existing products. Execute VAVE study and identify the cost out opportunities which are quality neutral. Design schematic of digital, mix signal & power electronics circuits to meet the requirement. PCBA prototyping, board bring-up and test, debug. Create the design documents, validation and test plan mapping to the requirements. Provide detailed requirement for FCT of PCBA to make sure meet design requirement. Essential Skills: Analog Precision amplifiers, Thermocouples and RTD, Pressure and flow sensors, High speed ADC and DAC. Power LDOs, Switching regulators, High voltage circuits and AC-DC converters. Communication/Data interface SPI, I2C, LVDS, USB, Ethernet Processor ARM processor family, FPGA and CPLD Component Engineering Component life cycle and RoHS, Reach compliance. Full time experience in digital and analog hardware design with advanced microcontroller, FPGA/CPLD, high speed ADC and DAC. Good experience with PCBA process and board bringup. Strong knowledge in alternate design analysis/part substitute for cost out ideas including design analysis for functional, quality and reliability. Experience in practices for Design for Test (DFT) and Design for Manufacturing (DFM). Proficient in test and debugging instruments like DSO, logic analyzer, spectrum analyzer and EMI/EMC test simulators. Hands on experience on EDA Tools like Altium, OrCAD and Mentor Graphics etc.

Please give a brief description of the duties and responsibilities for this job: Assist with Full Cycle Electronic development, from Concept to Hardware implementation and Revision/Modification, including Costing, Project Planning, and Project Supervision. Good Experience in PCB Schematic and Layout tool, Hands-on Exp in Altium is Mandatory. Might have worked at least with Two Microcontroller platform, Renesas or Microchip Platform is preferred. Create Product Specifications and Statements of Work based on Customer Requirements. Design and Develop Electronic Circuitry and Hardware along with test and Applications Software for Embedded Controls to meet regulatory Agency Safety Requirements. Sufficiently test all New Board Designs ensuring Total Performance and Product Success. Investigate Problems and Requirements of Projects and Develop plans for solutions. Analyse and recommend solutions to Circuit and Control issues and challenges. Document all Procedures for installation and maintenance for full Functionality. Assist with preparing BoM (bills of materials), Test Plans, Instructions, and Procedures. Research and select Components, Circuitry, and Topologies for Projects. Direct Schematic Captures and Printed Circuit Board Layout Processes for Electronic Designs. Participate in FMEA, DFMEA, and Design Reviews. Provide support to Production and Service Technicians as needed/able. List the skills and capabilities required of the person entering this position: Bachelors degree in electrical/Electronic Engineering, master’s in electrical/Electronic also preferred, not Mandatory Experience in Altium PCB design is preferred Proven successful experience in designing Hardware and Software for Embedded electronics controls using C/C++ is beneficial Exposure to Power Electronics and/or Power Supply Design is an Added Advantage Excellent Communication and Interpersonal skills Experience with Communications such as RS-485, Ethernet, and Wi-Fi Proficient Skills in MS Word, Excel, PowerPoint, and Outlook List the education level and/or certification and training requirements, as well as years of experience BE/BTech in Electronics/Electronics & Communication/Electrical & Electronics with min.10 years of Experience in Hardware Embedded Design and Development. Master’s in electrical/Electronic also preferred, not mandatory.

Job Role: Technical Lead - Embedded/Linux Systems Experience: 7+ Years Location: Bangalore Key Skills: Embedded Linux, kernel internals, device drivers Programming in C/C++, Python, and Bash Yocto, Buildroot, CMake Debugging with GDB, strace, perf Real-time systems, multithreading, synchronization Strong understanding of Git workflows and SoC-level architecture Key Responsibilities: Lead the development of embedded Linux platforms including bootloaders, kernel, middleware, and system services Oversee board bring-up, device driver integration, and low-level debugging Optimize CPU, memory, power, and boot-time performance Implement security patches and maintain system robustness Mentor engineers and uphold coding standards Collaborate cross-functionally with QA, hardware, and software teams

Drive and manage R&D initiatives in the Hardware team. Ensure that the Design and Quality standards are defined and executed. Be the key source to close all the dependencies from the CFTs. Role & responsibilities : Ensure that the external dependencies raised by CFTs, or external teams are addressed promptly. Participate in field issues reported, conclude and communicate the action points and root cause with team. Participate in preparing harness drawings, BOM, ECNS and other production and field issues root cause analysis documents. Participate the validation and testing activities for modules, PCBAs, communication performance and products. Participate and contribute to local procurements for R&D initiatives. Skills : Strong in electronics fundamentals, understanding schematics Experience in working with Serial protocols such as RS422/485, I2C, SPI, UART etc. Experience in working with Microcontrollers and Compute modules. Qualifications: BE / Diploma in Electronics and communication / telecommunication.

• Experience in design, development & testing • Experience in hardware designs and its concepts schematic, circuit design, component selection, Digital circuit interface • Experience in hardware tools like Altium & Board Bring up Required Candidate profile • Schematic PCB design, PCBA testing, Soldering hands on experience, various electronics instrument handling • Experience in oscilloscope & SMT Component • Experience in hardware tools like Altium

you will: Develop and integrate products deployed by leading service providers worldwide. Collaborate with a vibrant, BU-wide technical community to exchange ideas and innovate on next-generation technology. Explore opportunities for personal growth while mentoring colleagues and working on cutting-edge technologies. As a key member of this team, you will: Work alongside seasoned engineers to architect, design, and develop some of routers and solutions for the world's largest service provider, web centers, and enterprises. Contribute to the evolution of these systems to support exciting new customer business paradigms. Interact and collaborate with some of the finest talent in the industry, making work both fun and challenging. Engage with other groups such as Product Management, Marketing, Sales, Customer Support, and Advanced Services. Who You Are: You possess: In-depth knowledge of C and a solid understanding of Python. Extensive experience in a Unix/Linux-based development environment. Excellent coding, automation, and debugging skills. Strong teamwork and communication skills. Familiarity with hardware architectures such as PCI, PCIe, DMA, I2C, SPI , NPUs/DPUs and processors like x86, AMD, and ARM . Experience with board bringup is a plus. Experience with emerging technologies such as AI/ML and cloud computing is a plus. Experience and Qualifications: Experience: 9 to 12 years in embedded firmware development. Education: BE/B.Tech/ME/M.Tech/MS in CS/EE/IT/ECE, MCA, or similar education. Proven ability to derive design and code based on technical standards and write comprehensive, focused design documents. Experience in developing software/firmware for networking equipment. Excellent knowledge of software architecture and system design.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. Preferred Qualifications: Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 8+ years of Hardware Engineering or related work experience. 2+ years of experience with circuit design (e.g., digital, analog, RF). 2+ years of experience utilizing schematic capture and circuit simulation software. 2+ years of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc. 1+ year in a technical leadership role with or without direct reports. Principal Duties and Responsibilities: Leverages advanced Hardware knowledge and experience to plan, optimize, verify, and test critical electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems. Integrates complex features and functionality into hardware designs in line with proposals or roadmaps for complex products. Conducts complex simulations and analyses of designs as well as implements designs with the best power, performance, and area. Collaborates with cross-functional teams (e.g., design, verification, validation, software and systems engineering, architecture development teams, etc.) to implement new requirements and incorporate the latest test solutions in the production program to improve the yield, test time, and quality. Evaluates, characterizes, and develops the novel manufacturing of solutions for leading edge products in the most advanced processes and bring-up product to meet customer expectations and schedules. Evaluates reliability of critical materials, properties, and techniques and brings innovation, automation, and optimization to maximize productivity. Evaluates complex design features to identify potential flaws, compatibility issues, and/or compliance issues. Writes detailed technical documentation for complex Hardware projects. Level of Responsibility: Works independently with minimal supervision. Provides supervision/guidance to other team members. Decision-making is significant in nature and affects work beyond immediate work group. Requires verbal and written communication skills to convey complex information. May require negotiation, influence, tact, etc. Has a moderate amount of influence over key organizational decisions.