226 Rhino Jobs - Page 6

- Use software to create detailed 2D or 3D designs for complex projects. - Collaborate with others to establish timelines and budgets, as well as solve problems. - Knowledge of jewelry industry. - Ability to analyze data and situation and come up with creative solutions. - Keep up to date on industry standards. - Must have hand on Rhino & Matrix software. - Also, needs to ensure that the cost of the cad department is maintained as per the budget. -To focus on production efficiency for the entire team of professional designers and ensure workflow runs smoothly -To build standard CAD processes, and review outputs.

Role Purpose The purpose of this role is to design, develop and troubleshoot solutions/ designs/ models/ simulations on various softwares as per clients/ project requirements Do 1. Design and Develop solutions as per clients specifications Work on different softwares like CAD, CAE to develop appropriate models as per the project plan/ customer requirements Test the protype and designs produced on the softwares and check all the boundary conditions (impact analysis, stress analysis etc) Produce specifications and determine operational feasibility by integrating software components into a fully functional software system Create a prototype as per the engineering drawings & outline CAD model is prepared Perform failure effect mode analysis (FMEA) for any new requirements received from the client Provide optimized solutions to the client by running simulations in virtual environment Ensure software is updated with latest features to make it cost effective for the client Enhance applications/ solutions by identifying opportunities for improvement, making recommendations and designing and implementing systems Follow industry standard operating procedures for various processes and systems as per the client requirement while modeling a solution on the software 2. Provide customer support and problem solving from time to time Perform defect fixing raised by the client or software integration team while solving the tickets raised Develop software verification plans and quality assurance procedures for the customer Troubleshoot, debug and upgrade existing systems on time & with minimum latency and maximum efficiency Deploy programs and evaluate user feedback for adequate resolution with customer satisfaction Comply with project plans and industry standards 3. Ensure reporting & documentation for the client Ensure weekly, monthly status reports for the clients as per requirements Maintain documents and create a repository of all design changes, recommendations etc Maintain time-sheets for the clients Providing written knowledge transfer/ history of the project Deliver No. Performance Parameter Measure 1. Design and develop solutions Adherence to project plan/ schedule, 100% error free on boarding & implementation, throughput % 2. Quality & CSAT On-Time Delivery, minimum corrections, first time right, no major defects post production, 100% compliance of bi-directional traceability matrix, completion of assigned certifications for skill upgradation 3. MIS & Reporting 100% on time MIS & report generation Mandatory Skills: Delivery(RPA). Experience1-3 Years.

Role Purpose The purpose of this role is to design, develop and troubleshoot solutions/ designs/ models/ simulations on various softwares as per clients/ project requirements Do 1. Design and Develop solutions as per clients specifications Work on different softwares like CAD, CAE to develop appropriate models as per the project plan/ customer requirements Test the protype and designs produced on the softwares and check all the boundary conditions (impact analysis, stress analysis etc) Produce specifications and determine operational feasibility by integrating software components into a fully functional software system Create a prototype as per the engineering drawings & outline CAD model is prepared Perform failure effect mode analysis (FMEA) for any new requirements received from the client Provide optimized solutions to the client by running simulations in virtual environment Ensure software is updated with latest features to make it cost effective for the client Enhance applications/ solutions by identifying opportunities for improvement, making recommendations and designing and implementing systems Follow industry standard operating procedures for various processes and systems as per the client requirement while modeling a solution on the software 2. Provide customer support and problem solving from time to time Perform defect fixing raised by the client or software integration team while solving the tickets raised Develop software verification plans and quality assurance procedures for the customer Troubleshoot, debug and upgrade existing systems on time & with minimum latency and maximum efficiency Deploy programs and evaluate user feedback for adequate resolution with customer satisfaction Comply with project plans and industry standards 3. Ensure reporting & documentation for the client Ensure weekly, monthly status reports for the clients as per requirements Maintain documents and create a repository of all design changes, recommendations etc Maintain time-sheets for the clients Providing written knowledge transfer/ history of the project Deliver No. Performance Parameter Measure 1. Design and develop solutions Adherence to project plan/ schedule, 100% error free on boarding & implementation, throughput % 2. Quality & CSAT On-Time Delivery, minimum corrections, first time right, no major defects post production, 100% compliance of bi-directional traceability matrix, completion of assigned certifications for skill upgradation 3. MIS & Reporting 100% on time MIS & report generation Mandatory Skills: Payroll(IT). Experience1-3 Years.

Job Description for Research Associate Role In this role you will work across different projects to assess a building material's impact on energy and comfort performance along with facilitating new product development with BU teams. You will primarily use simulation software and onsite measurements to quantify the product's performance. We are looking for professionals who are self-motivated, can independently design and plan experiments, good in data analysis and preparing report for internal teams and external clients. The domain expertise is required in the following areas: daylighting, thermal and energy assessment through simulations and onsite measurements, MATLAB/Python basic knowledge, data monitoring and visualization. Key Accountabilities Perform climate analysis and understand the outdoor conditions for Indian, European and American cities Conduct whole building simulations that quantify energy consumption, thermal comfort and visual comfort in different building types, such as, offices, residences, hotels, hospitals, etc. Data analysis of simulation outputs using appropriate tools and compare it with various international or local standards like ASHRAE, ECBC, NBC etc. Prepare a standardized report of the analysis and use appropriate infographics to showcase the result effectively Work with the in-house team to optimize the simulation process and reduce the overall time of analysis and report generation Support Glass and Gypsum R&D teams for developing arguments to support products prescription Support BU R&D teams in new products developments Conduct onsite measurements for multi-comfort (thermal, visual, AQ, acoustics) assessment inside buildings The candidate should be enthusiastic to explore and develop new products leveraging publication, journals and university collaboration Preferred candidate profile Master's degree or equivalent in Building Science/Energy Efficiency/Thermal/Mechanical/Instrumentation / Civil /Architecture. Prior knowledge of building science principles, multi-comfort parameters and international and local standards (like ASHRAE, ECBC, NBC etc.) Proficiency in software, such as, Design Builder, Rhino, Grasshopper, Ladybug, Diva, LightStanza, Oneclick is a must Knowledge of tools like AutoCAD and Sketchup is highly desirable Should have excellent written and verbal communication skills and must be well organized and punctual Experience with data acquisition, instrument control, and instrumentation configurations would be an add-on Knowledge of post processing software related to big-data like MATLAB and MS excel

Skill required: Marketing Operations - Operations Management Designation: PPSM Associate Qualifications: Any Graduation Years of Experience: 1 to 3 years About Accenture Combining unmatched experience and specialized skills across more than 40 industries, we offer Strategy and Consulting, Technology and Operations services, and Accenture Song all powered by the worlds largest network of Advanced Technology and Intelligent Operations centers. Our 699,000 people deliver on the promise of technology and human ingenuity every day, serving clients in more than 120 countries. Visit us at www.accenture.com What would you do This role ensures smooth and Client compliant running of P2P processes across Global Marketing and GAM teams. What are we looking for Education:High-school diploma or equivalentExperience Managing business and financial data, working with business systems and processes Managing time, prioritisation of workload, and stakeholders Significant experience in P2P process and SAP systems Ability to work both in a team and independently Previous experience in a global functional and geographic matrix organisation.Skills & CompetenciesStrong data management skillsHighly proficient with MS Excel (pivot tables, lookups, formatting, calculations)Proficiency in use of business systems SAP, PRL, RRV, FIORI, ARAVO (CCD)Familiarity with Finance core processes accruals, GRIRSelf-starting; can prioritise own workload and manage stakeholders expectationsMeticulous attention to detail, including when delivering under time pressureHolds others to account for following Client processesProject & Relationship Management (Skilful)Market Understanding (Skilful)Performance Monitoring (Skilful)Continuous Improvement (awareness) Roles and Responsibilities: To support Global Marketing & GAM in P2P ProcessesThe raising and receipting POsEnsuring POs are raised against correct cost centres, IO codes & GL codes.Tracking of POs and maintaining reports to provide info on all POs raised, working with Finance team and giving visibility to marketing teams to support budget management.Resolving issues with POs as highlighted by the lubes query tracker, working with vendors, procurement and budget holders to ensure issues that may prevent payment of invoices are resolved within payment terms.Problem solving role involves seeking solutions outside of own remit and liaising with numerous other teams (Finance, Procurement, GBS)Continuous improvement in reporting to ensure it meets the needs of budget holders and increases visibility and tracking of ASP spendResponsible for managing issues related to mismatches between goods receipt and invoice receipt as detailed on the GRIR reports.Responsible for setting up new vendors and amending vendor details in the SAP system, liaising with budget holder, vendor, procurement, CCD team to ensure all relevant documents and approvals correctManaging payment schedules, monthly fees and subscriptions and arranging upfront and advance paymentsProvide ongoing training and support to the budget holders on the correct ways of working to ensure compliance to Company Policy.Responsible for keeping the P2P procedures up to date and published on the GlobalMarketing SharePoint site and maintaining the P2P SharePoint site and other digital interfaces, as assigned Responsible for reporting breaches of company policy Qualification Any Graduation

Job Summary: We are seeking a results-driven professional with a proven track record of success in the exhibitions/trade fair industry. The ideal candidate possesses a deep understanding of market trends, coupled with operational skills, to maximize revenue growth and capitalize on variety of opportunities in this dynamic and competitive sector. Functions : 3D & Technical Design: Create 2D floor plans and 3D models of exhibition layouts using design software (AutoCAD, SketchUp, 3ds Max, Rhino, etc.). Ensure designs comply with venue regulations, safety codes, and accessibility standards. Design: Develop creative concepts and themes for exhibition marketing and Visitor promotion . Liaise with internal teams (sales, marketing, production) to understand and fulfil event requirements. Design and Develop HTML/E-mailers. Project Coordination: Work closely with Hall Directors / managers, fabricators, and AV teams to ensure accurate implementation. Conduct site visits and on-site supervision during installation. Reviewing Vendor Documentation, Material & Vendor Coordination: Eye to details on vendor documentation and selection . Select materials, finishes, and graphics in collaboration with the teams. Coordinate with external vendors for printing, fabrication, and logistics for Domestic and International Exhibitions. Logistics and On-Site Management: Understand the process from Internal stake holders and educate the same to Exhibitors and Site Handling Agency. Oversee on-site event setup and dismantling activities. Ensure smooth flow of operations on event days, resolving any issues promptly. Health & Safety Compliance: Ensure events comply with health, safety, and fire regulations. Prepare risk assessments and health & safety documentation when needed. Skills & Competencies: Proficiency in CAD and 3D design software (AutoCAD, SketchUp, Adobe Creative Suite, Coral Draw, Photoshop etc.) Strong spatial and visual design skills. Knowledge of materials, fabrication methods, and exhibition technologies. Knowledge of Vendor selection and management. Excellent communication and presentation skills. Strong organizational and time-management abilities. Understanding of branding and marketing principles. Ideally have experience in handling exhibitions / events with an excellent understanding relating to the exhibition/event industry. Conversant with Business applications software such as MS Word, Excel, Power Point internet and ability to prepare presentations/ fact sheets/agenda points for meeting. Work Environment: Office-based role with frequent on-site work at exhibition venues. Requires travel and availability to work evenings/weekends during events. Physically active during event setup and dismantling periods. Reports to: HOD-Trade Fairs Qualifications : Bachelors degree in any of the related field. 2-7 years of experience in exhibition, event, or spatial design roles. Location : Bangalore The following additional Perks and Benefits are Borne by the organization and not part of the CTC : Gratuity and Superannuation. Insurance: Group Medical Insurance and Group Personal Accident Policy. Long-term Employee Recognition Benefit

Job Title: Senior Architect Minimum experience : 4-6 years Location : Bandra Kurla Complex WORK WITH ONE OF THE TOP ARCHITECTURAL FIRM OF THE COUNTRY. SALARY - Depending on the role /designation and experience). Contact - 022 66223306 / 022 66223330 Whatsapp - 8850488582 Email - hr1@toa.org.in Job Description : We are looking for a passionate and skilled Senior Architect to join our innovative team. The ideal candidate will have 4 to 6 years of experience and a strong proficiency in architectural software, contributing to a variety of exciting projects. Key Responsibilities: 1. Design Support: Collaborate with Junior Architects to design and develop architectural projects, ensuring creative and technical excellence. 2. Documentation: Prepare and revise architectural drawings, models, and presentations that effectively communicate design intent. 3. Site Analysis: Conduct site visits to assess conditions and document findings to inform project development. 4. Regulatory Research: Investigate building codes, zoning regulations, and industry trends to ensure compliance and best practices. 5. Team Collaboration: Work closely with engineers, contractors, and clients to facilitate effective communication and project execution. 6. Project Documentation: Maintain thorough project documentation, including design revisions, notes, and reports. 7. Participation: Engage in design meetings and presentations, sharing insights and contributing to collaborative efforts. 8. Continuous Learning: Stay informed about the latest software and technologies in the architectural field. Software Skills: 1. Proficient in Autodesk Revit, Rhino, AutoCAD, and SketchUp. 2. Strong knowledge of Adobe Creative Suite (Photoshop, InDesign, Illustrator). 3. Familiar with Building Information Modeling (BIM) and Microsoft Office. 4. Technical Expertise: Solid understanding of building codes, zoning regulations, and construction methods. 5. Soft Skills: Excellent communication, teamwork, and problem-solving abilities. 6. Work Style: Ability to perform well in a fast-paced and collaborative environment. Preferred Qualifications: 1. Certifications: LEED AP or WELL AP certification is a plus. 2. 3D Visualization: Experience with 3D modeling and visualization tools (e.g., Rhino, V-Ray). 3. Sustainability Knowledge: Familiarity with sustainable design principles and practices. 4. AI Tools: Experience with AI software (e.g., Houdini, MidJourney) is advantageous.

Role Overview Duroflex is looking for a Product Engineer Design & Documentation to support the end-to- end product development lifecycle, from design documentation to manufacturing execution. The ideal candidate will have strong technical expertise in furniture/mattress design, proficiency in CAD software, and experience in working with cross-functional teams to bring innovative products to market. Key Responsibilities 1. Design & Product Documentation Create and maintain detailed product design documentation, engineering drawings, and specifications. Ensure accuracy in Bill of Materials (BOMs) and technical documentation for manufacturing. 2. Technical Support for Product Development Collaborate with design and R&D teams to translate concepts into manufacturable products. Assist in the development and prototyping of new furniture/mattress designs. 3. Manufacturing Coordination & Process Optimization Work closely with vendors and in-house production teams to ensure smooth product execution. Develop assembly instructions and quality control parameters to maintain production efficiency. 4. Material & Process Expertise Strong understanding of materials like wood, engineered wood, upholstery, foams, and fabrics. Knowledge of sheet metal processing, woodworking techniques, and upholstery manufacturing. 5. Reverse Engineering & Continuous Improvement Conduct reverse engineering studies to improve product designs and optimize costs. Implement design modifications to enhance functionality and durability. 6. Cross-Functional Collaboration & Compliance Coordinate with supply chain, marketing, and operations teams to align product development with business objectives. Ensure adherence to safety, compliance, and quality standards in product designs. 7. Prototyping & Validation Oversee prototyping and validation processes, ensuring designs meet functional and aesthetic standards. Participate in frequent site visits to monitor production and resolve design challenges. Education: B.E/B.Tech in Mechanical Engineering, Industrial Design, or a related field. Experience: 4-6 years in furniture/mattress design and engineering. Software Proficiency: AutoCAD, SolidWorks, Rhino, SketchUp. Industry Experience: Furniture & mattress manufacturing (preferred from Urban Ladder, Wakefit, Nilkamal, Home Centre, or similar). Soft Skills: Strong analytical skills, cross-functional collaboration, and problem-solving abilities.

Undertaking Rhino CAD jewelry assignments Support Rhino CAD for customers in India Undertaking Training assignments in CAD all India Required Candidate profile Knowledge of Rhino 8 for Jewelry Experience of min 2 years Knowledge of Rendering software Training experience will be beneficial

We are looking for a Jewellery Design Intern to support our design team in creating elegant, contemporary pieces that align with Wahe Jewellerys brand aesthetic. The ideal candidate should have a strong sense of design, creativity, and attention to detail, along with basic knowledge of jewellery materials and manufacturing processes. Responsibilities include assisting in sketching new designs, creating digital mockups, researching trends, and coordinating with the production team. Proficiency in design tools like CorelDRAW, Rhino, or Illustrator is preferred. This internship offers hands-on experience in a fast-growing D2C jewellery brand and exposure to both creative and commercial aspects of jewellery design. Location- Remote,Delhi NCR,Bengaluru,Chennai,Pune,Kolkata,Ahmedabad,Mumbai, Hyderabad

We are looking for a Jewellery Design Intern to support our design team in creating elegant, contemporary pieces that align with Wahe Jewellerys brand aesthetic. The ideal candidate should have a strong sense of design, creativity, and attention to detail, along with basic knowledge of jewellery materials and manufacturing processes. Responsibilities include assisting in sketching new designs, creating digital mockups, researching trends, and coordinating with the production team. Proficiency in design tools like CorelDRAW, Rhino, or Illustrator is preferred. This internship offers hands-on experience in a fast-growing D2C jewellery brand and exposure to both creative and commercial aspects of jewellery design. Locations : Mumbai, Delhi / NCR, Bengaluru , Kolkata, Chennai, Hyderabad, Ahmedabad, Pune, Remote.

Work with Us. Change the Word. At AECOM, we're deivering a better word. Whether improving your commute, keeping the ights on, providing access to cean water, or transforming skyines, our work heps peope and communities thrive. We are the word's trusted infrastructure consuting firm, partnering with cients to sove the word’s most compex chaenges and buid egacies for future generations. There has never been a better time to be at AECOM. With acceerating infrastructure investment wordwide, our services are in great demand. We invite you to bring your bod ideas and big dreams and become part of a goba team of over 50,000 panners, designers, engineers, scientists, digita innovators, program and construction managers and other professionas deivering projects that create a positive and tangibe impact around the word. We're one goba team driven by our common purpose to deiver a better word. Join us. Must have good experience deivering Landscape Design/ Pubic Ream projects in the private or pubic sectors. Must be famiiar with design, tender and construction processes. Internationa experience of the UK, Midde East or APAC regions wi be considered an added advantage. Must be proficient in design detaiing and construction techniques. Must be proficient in, but not imited to, AutoCAD, Revit, Adobe Creative Suite (photoshop, InDesign and Iustrator), MS Office, SketchUp, Rhino and rendering softwares ike Lumion/ Enscape/ Twinmotion. Advanced experience of BIM reated software in Landscape Design/ Infrastructure works wi be considered an added advantage. Candidate shoud be abe to assign work to junior team members and BIM technoogists. Use business reated software independenty with abiity to guide junior team members. Candidates shoud demonstrate competency in softwares, cear communications skis to gain understanding of the required tasks, quick and a methodica decision-making approach for the design & reated tasks. Assist in the production of drawings incuding pans, grading, section, eevations, perspective, 3D mode and reports. Quaifications A Masters degree in Landscape Architecture from universities of Internationa repute wi be an added advantage Appicants are required to have between 7-10 years of experience in reevant fied . Bacheor’s degree hoders in Landscape Architecture or Architecture wi be considered, if they can showcase reevant experience in Landscape Design project stages incuding design, documentation and site impementation Chartered candidates sha have an added advantage Additiona Information At AECOM, our Freedom to Grow phiosophy supports fexibiity and baance to hep our peope thrive. As part of this approach, we ask a hybrid empoyees to work from an AECOM office at east three days per week.

We are looking for a CAD Designer Intern to assist our jewellery design team in translating creative concepts into precise digital designs ready for prototyping and production. The role involves working on 2D and 3D CAD models, rendering designs, and collaborating with the design and manufacturing teams to ensure technical accuracy. The ideal candidate should have basic knowledge of software like Rhino, Matrix, or JewelCAD, along with an understanding of jewellery components, proportions, and materials. This internship offers hands-on experience in the product development process at a fast-growing contemporary jewellery brand. Location: Remote- Bengaluru,Hyderabad,Delhi / NCR,Chennai,Pune,Kolkata,Ahmedabad,Mumbai

Human-Centered Design: Lead the conceptualization of bio-acquisition wearable devices, including EEG headsets and BCI systems, focusing on ergonomics, usability, and user comfort. Experience-Led Design: Craft intuitive physical interactions through refined form, texture, and touchpoints that enhance the overall user experience, especially in long-term or repeated-use scenarios. User Research & Ergonomic Validation: Conduct interviews, ergonomic assessments, and usability testing tailored for wearables that interface with the human body, ensuring accurate sensor placement and comfort. Design Language & CMF Strategy: Define design languages and CMF strategies aligned with technical performance (e.g., sensor conductivity, material flexibility) and brand vision. 3D Modeling & Prototyping: Create high-fidelity CAD models and physical prototypes for rapid iteration, considering fit, skin contact, and sensor integration for bio-signal capture. Mechanical Design & DFM: Engineer components and assemblies for manufacturability, with attention to tolerances critical for sensor accuracy and user comfort. Materials & Process Engineering: Select biocompatible and high-performance materials suitable for biosignal acquisition, including skin-safe plastics and flexible mechanical structures. Creative Engineering Solutions: Address unique design constraints posed by human-machine interfaces with innovative, scalable, and user-safe solutions. Cross-Functional Collaboration: Work with neuroscientists, industrial designers, firmware engineers, and manufacturing partners to ensure product feasibility and performance. Vendor & Production Liaison: Coordinate with vendors to manage prototyping and scaling of components involving bio-acquisition hardware (e.g., electrodes, sensors, housings). Technical Documentation: Produce comprehensive documentation and specifications supporting compliance, reliability, and repeatable performance of sensor-integrated wearables. Quality & Compliance: Define and execute testing protocols for biosignal fidelity, mechanical durability, and compliance with relevant medical or wellness device standards. Requirements Education: Bachelors or Masters degree in Industrial Design, Mechanical Engineering, Product Design, Mechatronics, or a closely related field or equivalent practical experience. Experience: Minimum 4 years of experience in developing physical products, with strong preference for work in bio-acquisition wearables, medical devices, or BCIs. Portfolio: A strong portfolio demonstrating end-to-end product developmentincluding contributions to mechanically sound, sensor-integrated, and production-ready wearable solutions. Technical Tools: Expertise in SolidWorks, Fusion 360, or Rhino; rendering with KeyShot or Blender; and proficiency with Adobe Creative Suite and 3D prototyping techniques (e.g., 3D printing, CNC). Manufacturing Expertise: Proven experience with DFM/DFA, plastic injection molding, sheet metal, tolerancing, and assembly techniques suitable for precision fit around the human body. Wearable Ergonomics: In-depth understanding of ergonomic principles, sensor placement, and human-machine interaction specific to head-mounted or biosignal-based devices. Team Collaboration: Strong history of working closely with engineering, neuroscience, and industrial design teams to translate design intent into manufacturable, high-performance products. Problem Solving: Methodical, iterative approach to design challengesbalancing user needs, technical feasibility, and regulatory considerations. Manufacturing Interface: Experience liaising with vendors and suppliers for wearable and sensor-integrated component production, managing risk and ensuring quality. Communication: Excellent skills in presenting design rationale, engineering trade-offs, and user research findings to multidisciplinary stakeholders. Bonus Qualifications Biosignal Product Experience: Prior work in bio-acquisition products such as EEG, EMG, ECG, or other physiological monitoring devices is a significant advantage. Leadership Potential: Demonstrated initiative, decision-making ownership, and a vision to grow into lead design or product leadership roles. Innovative Mindset: Passion for creating cutting-edge, ergonomic, and reliable wearable technology that blends seamlessly into users lives while delivering measurable impact.

Project Role : Application Developer Project Role Description : Design, build and configure applications to meet business process and application requirements. Must have skills : SAP S/4HANA Embedded Production Planning and Detailed Scheduling (EPPDS) Good to have skills : NAMinimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary Experience in Production Planning and Detailed Scheduling in SAP S/4HANA embedded PP/DS Planning Demand in the Supply Chain Roles & ResponsibilitiesExperience in Production Planning and Detailed Scheduling in SAP S/4HANA embedded PP/DS.- Expected to be an SME.- Collaborate and manage the team to perform.- Responsible for team decisions.- Engage with multiple teams and contribute on key decisions.- Provide solutions to problems for their immediate team and across multiple teams.- Facilitate knowledge sharing sessions to enhance team capabilities.- Monitor project progress and ensure timely delivery of application features. Professional & Technical Skills: Production Planning Results Evaluation:Production Planning executing and evaluating the Planning Run Results with Alerts Planning Procedure:Configuring Basic Parameters for Planning / Executing the Production Planning Run / Planning a Product Using the Planning Procedure Order Creation with Product Heuristics:Using Demand Management in PP/DS / Planning Make-to-Order Production Using PP/DS / Using Firming in PP/DS / Configuring Product Heuristics Scheduling in Production Planning:Determining the Source of Supply of the Order / Scheduling Operations with the Strategy Profile / Scheduling a Planned Order for Production Pegging in Production Planning:Configuring Dynamic and Fixed Pegging Scheduling Operations with the Detailed Scheduling Planning BoardPlanning Production with Detailed Scheduling Strategies and Heuristics / Managing Setup Times with the Setup Matrix / Managing Scheduling with the PP/DS Optimizer. Qualification 15 years full time education

Manage, organise, plan and lead a team of expert testing & instrumentation engineers for successful fulfillment of project requirements for various clients in the domains of Vehicle Dynamics, Brakes, NVH testing and training services under the supervision of the Head of Chassis & Active Safety. Perform dynamic tests on proving grounds and public roads as required for passenger cars and light commercial vehicle's projects independently Perform dynamic test data analysis, mainly through in-house developed software's include pre/post processing of the experimental data to check the vehicle dynamics behavior of the tested vehicle and being able to explain the root of the phenomena happening independently. Demonstrate, present and justify technical decisions based on test & report data to internal teams & clients for vehicle attribute development under the guidance of the Head of Chassis & Active Safety. Manage client interaction, client project reporting and support with sales presentations under the supervision of the Head of Chassis & Active Safety. Ensure occupational health and safety and IDIADA quality process is adhered to at all times in the department under the guidance of the Head of Chassis & Active Safety. Train and develop a team of vehicle dynamics instrumentation and test engineers to meet IDIADA global testing standards and monitor skill matrix and technical competency development

Position Specification Aliens Group Pvt. Ltd. Junior Architect, Hyderabad Private and Confidential ABOUT ALIENS GROUP is a premium real estate player based out of Hyderabad and poised to dominate real estate market with a land bank of 1500+ acres land to transform the way we live by matching it up with global standards and deliver exceptional quality of living spaces governed by our idea of intelligent living. Founded in 2004 with the visionary zeal of transforming Hyderabads landscape, Aliens Group has achieved spectacular feat in real estate industry. Headquartered in Hyderabad, Aliens Group includes companies such as Aliens Infra Tech Pvt. Ltd. and Aliens Developers. Having successfully executed multiple projects such as Sweet Home Venus, Fast Track, Aliens Blend, Aliens Valley, Aliens Elite etc., Aliens Group has lived up to its name and reputation and made a mark for itself by winning multiple accolades. Some of its flagship ongoing projects such as Aliens Space Station and Aliens Hub are one-of-its kind developments in Indian housing and living space. Delivering a world-class living experience, projects from Aliens are making living an intelligent and effortless experience. Every living space is designed to optimise its performance through the linkage and cross-section of sustainable architecture, modern technology and a joyful user experience. Undoubtedly, Aliens is paving way for re-defining living experience in India in commensuration to that of the best liveable cities in the world. 2 Private and Confidential The Role We, at Aliens are looking for an enthusiastic and dynamic Architect as part of our team with strong professional experience in all aspects of designing, drafting, working on residential projects, landscape designing, planning, budgeting, and execution for interior design projects. The incumbent will be responsible for creating a project plan that includes detailed layouts, technical models and drawings, and estimates for time, cost, materials, and equipment. S/he will be required to consult with the client regarding their available space, needs, and style preferences and monitor progress for all aspects of the project and ensure efficient, accurate, and cost-effective implementation of the project plan. The incumbent would work in a high- paced team environment with multiple team members. S/he would be based in Hyderabad and would report to the Interiors-Head. Key Responsibilities 1. Responsible for creating natural and built environments that are aesthetically pleasing as well as practical. 2. Responsible for delivering best in class architect designs and execute the same aesthetically. 3. Responsible for coordinating and liaising with appropriate stakeholders for efficient delivery of designs. 4. Well versed with compliances and ensure effective budgeting while conceptualizing and delivering their designs. Key skills: Interior Designing, Design, Real Estate, Interiors, Concept Design, Architecture, Quantity Estimation, Photoshop, Illustrator, InDesign, VRAY, AutoCAD, Lumion, Sketchup Candidate Profile Specifically, the candidate should have: 1. B.Arch degree in Architect Design or similar from NIRF ranked institute/ stellar academic record (Tier I / II). 2. Theoretical and professional working experience in architectural drawing, quantity estimation, concept design. 3. Technical skills and the ability to use design tools such as AutoCAD, Revit, Sketchup, Lumion, V-Ray, Photoshop, Illustrator, InDesign etc. would be an added advantage. 3 Private and Confidential

Job Description Designer BIM (Tekla Concrete) – Bridges and Civils Job location (Country/City) India: Gurugram / Noida We invite you to bring your strong knowledge of Tekla & Autocad(2d & 3d) into play as you coordinate with Project Managers, Engineers and other Technicians for the technical delivery of a wide range of engineering drawings (on Bridges, Marine and Tunnels) for projects of varying complexity. To succeed in this role, you must have a Diploma in Civil Engineering or ITI. Are you our new Designer BIM - Bridges & Civils? Click the apply button to send your application. Inviting bright minds Do you want to push the boundaries of your profession and develop your excellence in an open, collaborative and empowering culture? We work to create a sustainable future and our inspiring projects and innovative solutions strive to set the standard among our peers. You will join a global company that has been growing successfully since its founding in 1945. Together, we lead and leave positive impact on societies, companies and people around the world. You will join our REC department As our new Designer BIM - – Bridges & Civils you will be part of a world-class , i nnovation-driven engineering design center owned by an independent trust and its employees. REC is a highly sophisticated center of engineering excellence and is based in our India head office in Gurgaon /Noida . Working in partnership with all our established offices globally, the Ramboll Engineering Centre (REC) is a center for excellence in design by offering optimized solutions to the rest of the organization. Your key tasks and responsibilities will be: Deliver quality components of Projects and gain knowledge towards competence enhancement of knowledge Will coordinate with Project Managers and/or Engineers for drafting work in a given project. Will work on 3D models & detailed drawings for a range of projects and mentor other members of the drafting team in accomplishing complex tasks. Is responsible for technical correctness (checking) and timely delivery of the drawings and 3D Tekla model Will assist the project team in developing/implementing CAD /BIM standards. Will assist in improving the efficiency and productivity of the CAD team Communicates the training and development needs to his supervisor Exercises self-discipline and work ethics Respect and follow company policies and procedures Welcome to our Transport division Ramboll is a global transportation consultancy, and we work on some of the biggest and most innovative infrastructure projects in the world. We are close to 3,000 bright minds working within Transport worldwide, creating practical, sustainable and economic solutions for national transport authorities, private contractors and municipalities alike. How to apply Apply online. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application. Qualification Your starting point for constant growth From the moment you join Ramboll, we will support your personal and professional development so that you grow with the company. For this role, we believe your starting point is: Diploma in Civil Engineering or ITI Trained Professional with 3+ years of professional experience. Candidates with B. Tech will have an edge over the others. Knowledge of Tekla is desirable, knowledge of European standards would be desirable, Knowledge of advanced Tekla modeling and drawing tools like template settings and custom components would be desirable with scripting experience in Rhino-Grasshopper Hands-on experience with various types of Bridges Should have knowledge of concrete detailing standards. Must have experience on an international project Self-motivated, team player and able to work independently with minimum supervision Flexible attitude, in an environment with frequently changing deadlines can be relied on to meet deadlines. Personal qualities that will help you succeed in this role include - Strong knowledge of Tekla and good level of written and spoken English. Additional Information

Responsibilities: * Documentation for Certification (eg: IGBC, LEED, GRIHA, ...Any other) * Project Assessement and coordination * Handhold project certification * Site visits

Require a candidate who have knowledge of CAD designing . Candidate must have Jewellery background . Attention to detail with excellent visualizing skills . The ideal candidate will be responsible for creating quality CAD designs for jewellery pieces Required Candidate profile Proficiency in industry-specific CAD software 4 to 6 years of hands-on experience as a CAD Designer in the Gems & Jewellery industry Ability to manage multiple projects and deliver within deadlines.

Position: 3D Visualizer Location: Gurugram Experience: Minimum 6 years Qualification: Any Graduate/ Post-graduate Roles/Responsibilities: Basic architectural 3D and high-end interiors essential; product development & modelling preferred. Must have worked with HNI clients. End-to-end project handling- concept, presentation, mood boards, 3D development, client handling, interior design, material knowledge. Software- Max, Photoshop & Sketchup (3D) with V-ray essential, Rhino is an added advantage. If interested, kindly share your CV at anjali.sharma@manpower.co.in. Thanks & Regards Anjali Sharma Associate Consultant ManpowerGroup ManpowerGroup Services India Pvt. Ltd. anjali.sharma@manpower.co.in www.manpowergroup.com

Role: WSP are looking for an Engineer to join our iCRC UK Building Specialists team. Part of WSP iCRC UK’s Specialists Group – our Wind Engineering team provides specialised wind engineering services in support of all the major multi-disciplinary projects of the business and is also uniquely positioned to offer independent and unbiased technical advice directly to end clients. Our Wind Engineering team has access to an extensive network of trusted and high-quality boundary layer wind tunnel facilities which, often combined with WSP’s in-house CFD modelling experts, are used to support its consultancy services. The team is highly client-focused and prides itself on delivering high technical quality on landmark projects to tight timescales and to a high degree of customer satisfaction. Responsibilities: Perform wind climate analysis studies. Perform desktop studies. Design wind tunnel experiments and liaise with model makers. Post-process and interpret wind tunnel data. Technical report writing and preparation of presentation documents. Contribute to the R&D activities of the Wind Engineering team. Work on defined tasks under the close supervision of an Associate. Work along-side the CFD team as / when required. Collaborate with our structural / mechanical / faade engineering teams as / when required. Attend client meetings as / when required. Attend wind tunnel tests / workshops as / when required. Personal development (e.g. technical knowledge and other relevant skills / attributes). Mandatory skills: Familiarity with a wide range of experimental wind tunnel testing techniques as well as with data analysis techniques for unsteady & bluff body aerodynamics. Previous boundary layer wind tunnel testing experience ( 5 years) specifically in relation to wind effects on building structures. Familiarity with various building codes and their application within the context of wind engineering. Proficiency in Python. Proficiency in usage of various CAD software, particularly Rhino 3D. Attention to detail, and the ability to adapt to the level of quality and accuracy expected by the team in the preparation of various reports, technical notes and presentations. Excellent problem-solving ability, striking a good balance between application of complex academic principles and practical engineering applications. Able to independently and pro-actively seek solutions to problems faced in day-to-day tasks.

Responsibilities: * Prepare working drawings & detail drawings using AutoCAD & REVIT. * Collaborate with design team on product development. * Manage project timelines & budgets. * Present designs at client meetings.

Role & responsibilities Design Responsibilities: Develop, revise, and finalize design concepts based on project requirements or client needs. Create detailed technical drawings, 3D models, and specifications using CAD or design software. Ensure designs meet functional, aesthetic, and production feasibility standards. Collaborate with stakeholders to refine design concepts and materials. Stay updated with industry trends, materials, and technology to improve design processes. PPAP Production Responsibilities: Coordinate with production teams to ensure designs are executed accurately and efficiently. Monitor production schedules and workflow to ensure deadlines are met. Solve problems that arise during production, such as material shortages or technical issues. Implement quality control measures and support continuous improvement initiatives. Liaise with vendors and suppliers regarding material sourcing and prototyping. Maintain documentation for designs, revisions, and production processes.

Duties include planning, developing architectural designs, collaborating with engineers & designers, managing projects, and ensuring compliance with regulations. Close cooperation with clients to create functional and aesthetically pleasing buildings