Relay Testing Engineer

Siemens

4 - 8 years

7 - 9 Lacs

navi mumbai

Posted:1 week ago| Platform:

Apply

Skills Required

testing and commissioning relay testing micom s1 studio areva relay pt abb relay siemens relay power transformers ct transformer testing digsi protection relay pcm omicron cmc 356

Work Mode

Work from Office

Job Type

Full Time

Job Description

About the job:

Engineer- Relay Testing

Navi Mumbai - Direct Contract for 1 year

Job requirements

Relay Testing Knowledge on software like MICOM S1 Studio, DIGSI and PCM for extracting and analysing of Disturbance Records and Events Log of AREVA, SIEMENS and ABB make relays.
Knowledge of Transformer Testing (Tan-Delta Testing, Winding Resistance Test, Vector Group Test, Oil Test, Ratio Test and Partial Discharge Test).
Knowledge of in Reactor Testing (Tan Delta Testing, Winding Resistance Test, Insulation Resistance Test, Oil Test, Partial Discharge test and Reactance Measurement Test).
Knowledge of CT & PT Testing (Winding Resistance Test, Insulation Resistance test, Ratio Test, Polarity Test and Primary Injection Test).
Sub-stations 220KV/33KV/6.6KV/415V, electrical distribution system, Audit, Legal, Safety, Meetings with Siemens Back office, Kaizen & improvement, Client Handling, Site team Handling

Experience Requirements:

Knowledge in softwares like Wavewin32, Micom S1 Agile, PCM 600, Archive Crawler, Archive Reporter, System Configuration Editor (SCE), System Maintenance Tool (SMT), Computer Maintenance Tool (CMT) and Omicron Test Universe.
Knowledge on Line Protection (Distance Relay), Reactor Protection (Differential, Backup Impedance & REF), Transformer Protection (Differential, REF, Bucholtz, Oil Surge Relay, Pressure Relief Valve, On Load tap Changer, Off Load Tap Changer, Overcurrent and Earth Fault includes HV, IV & LV) and Bus Bar Protection (Differential).
Worked on Omicron CPC 100, CPC 356 and CP TD 12/15.
Relay operation and trouble Shooting of Siemens (7SJ62, 7SJ64), Micom (P132, P141), GE and ABB Numerical relays
Relay testing by using Omicron CMC 356 and Megger MPRT 8430
Knowledge on software like MICOM S1 Studio, DIGSI and PCM for extracting and analysing of Disturbance Records and Events Log of AREVA, SIEMENS and ABB make relays.
Knowledge on testing of Voltage chords and power chords of protection relays include Siprotec 7sj6221/7sj6222, Areva P132/ P141 and ABB Ref 615 and analysing the fault and reporting it to client.
Experience in HT Breaker Operation, Maintenance, Servicing, Troubleshooting & Testing in 6.6KV SF6 & 6.6 KV VCB Breaker Make Siemens, ABB & Areva
Operation and maintaining of Transformers 2 MVA, 2.5 MVA, 20 MVA & 27 MVA make Voltamp
Planning & Performance of daily / monthly / annual maintenance of breakers, 6.6 KV VCB (Siemens), ACB (Siemens), Capacitor Banks, Battery chargers and battery banks and VFD panels
Should have an ability to identify and troubleshoot the malfunctions, replacing parts and components.
Should be familiar with safety procedures while carrying out electrical work
Keep good Coordination and Communication, good relationship with Team members and Client
Should be familiar with Report preparation MIS, Root Cause Analysis, PPT & Excel.
Supported operation team on all erection, commissioning, testing & maintenance related issues.
Knowledge of Current Control Unit (CCU) used for WTI, OTI, OLTC Tap Position reporting to SCADA.
Knowledge on 220kV Switchyard, 33kV ABB GIS and 33 kV/ 6.6 kV/ 415 V AIS Substations
Knowledge on Ethernet Switch (EFS), Ethernet Cable (RJ45), Fibre Optic Patch cable (Armored & Un Armored), Coaxial Cable (GPS) and Fibre Optic TCP/IP Ring.
Knowledge on Synchronism check parameters.
Knowledge on Tie Protection i.e. Local Breaker Backup (LBB).
Knowledge on Auto-Recloser, SF6 gas Lockout, Phase Discrepancy, SF6 gas Alarm, CB closing Interlocks, Control Switching Device Interlocks (RPH3) and emergency CB tripping conditions.
Analyzing the cause and effect of faults through Disturbance Records & Events Log extracted from the Relay and preparing Root Cause Analysis and submitting to client.
Knowledge of Transformer Testing (Tan-Delta Testing, Winding Resistance Test, Vector Group Test, Oil Test, Ratio Test and Partial Discharge Test).
Knowledge of in Reactor Testing (Tan Delta Testing, Winding Resistance Test, Insulation Resistance Test, Oil Test, Partial Discharge test and Reactance Measurement Test).
Knowledge of CT & PT Testing (Winding Resistance Test, Insulation Resistance test, Ratio Test, Polarity Test and Primary Injection Test).

Qualification Requirements

You should have minimum 5 years’ experience preferably in with bachelor’s degree in electrical engineering or Diploma in electrical with 8 years of experience .
Experience in maintenance of electrical systems of Refinery, Petrochemicals, Fertilizer industry is an added advantage.
Shall be able to join within One month from the date of Offer.
Shall have the Supervisory license for HT/LT systems.

More Jobs at Siemens

Process Expert - Opportunity to Cash

Bengaluru, Karnataka

Experience: Not specified

Salary: Not disclosed

Process Expert - Site Installation

Bengaluru, Karnataka

Experience: Not specified

Salary: Not disclosed

Process Expert - Testing and Commissioning

Bengaluru, Karnataka

Experience: Not specified

Salary: Not disclosed

Business Administration - Proj Exc Commercial

Bengaluru, Karnataka

Experience: Not specified

Salary: Not disclosed

EHS Country Head

Mumbai, Maharashtra, India

5 - 5 yrs

Salary: Not disclosed

Mock Interview

Practice Video Interview with JobPe AI

Start Job-Specific Interview

Start Your Job Search Today

Browse through a variety of job opportunities tailored to your skills and preferences. Filter by location, experience, salary, and more to find your perfect fit.