139 Mitsubishi Plc Jobs

Knowledge: Machine Testing and Commissioning Knowledge in Automation Field Troubleshooting for SPM Knowledge about Pneumatic, Hydraulic, PLC, Servo, Vision, Robot, SCADA and other control systems Knowledge about electrical diagrams, product manuals, machine manuals Good Communication Skills. Electrical Controls Design. On time support to Customer during MQ1/MQ2 Process. Willing to Travel Team competency mapping Guidance to the team This job is responsible for: Understanding the design and receiving the PDRN file document from Controls Design dept. Examine the PDRN file and ensure all the documents are received as per intended purpose and make MOM. Offline Program preparation (PLC/HMI etc.) and ready before Power ON. Offline Testing (PLC/HMI/Servo/Printer/Load cell/LVDT etc.) and prepare the Special Device Testing document. Coordinating with SCADA/ROBOT/VISION Team and provide Tags for doing the offline program Power ON and do the IO check & safety Validation and document it. Dry Run (Manual/Step/Auto Mode running the machine without customer components) and Poka yoke/Cycle time/Data log & Traceability/Key deliverables from customer need to be achieved 100%. Troubleshooting of Pneumatic, Hydraulic, PLC, Servo, Vision, Robot, SCADA and other control systems. Auto mode testing with component along with Mechanical team. Pre MQ1 check List need to be prepared and shared to customer before their visit. Do the MQ1 along with mechanical & customer and get the MQ1 Signed off copy as per time line. Prepare and share RCA report and Lesson learnt documents with respect Failure and repeated issues. Machine Installation and commissioning at site Do the MQ2 along with mechanical & customer and get the MQ2 Signed off copy as per time line. Prepare the Machine Manual (Trouble Shooting and HMI Navigation) and give it to Controls Design Dept. Handover the Project to After Sales and service dept. after the MQ2 Signed off Team support and guidance

You will be responsible for: - Working with automation protocols such as OPC UA and MQTT - Programming robotics using languages like C++ and Python - Utilizing Mitsubishi PLC, Kinco HMI, Vision camera, and LabVIEW for programming - Implementing machine learning frameworks like TensorFlow and PyTorch Your main duties will include leading Industry 4.0 initiatives to enhance automated machines and digitalization. You will also oversee maintenance operations, ensure equipment reliability, and optimize plant performance. Qualifications: - Minimum of 8 years of experience in a similar role within the Industry 4.0 or related field - Educational background in Engineering This is a full-time, permanent position with a day shift schedule from Monday to Friday. The preferred education level is a Bachelor's degree. Experience with Selenium is also preferred. Work Location: In person,

Looking for a PLC Programmer (2 to 4 yrs) with hands-on experience in SPM automation, PLC logic, HMI/SCADA, machine commissioning, and panel wiring. Skills: Siemens/Mitsubishi/Delta PLCs. Contact: Arun - 7395997274.

Job Title: Sr. Engineer Automation Job Description: We are looking for a technically strong and self-driven Sr. Engineer Automation to join our team. The ideal candidate will be responsible for the design, development, and execution of industrial automation projects. This includes leading electrical & control teams and developing automation concepts in coordination with cross-functional teams (CFT). Responsibilities: Lead automation projects and coordinate with cross-functional teams PLC programming (Ladder/Structured Text) using at least two of the following: Siemens (TIA Portal), Allen Bradley (Studio 5000), Mitsubishi (GX Works2/3), Omron (Sysmac Studio), Schneider (SoMachine) Electrical product selection based on application Hands-on with communication protocols : Ethernet/IP, Modbus, CIP, Profinet, Profibus HMI and SCADA design and integration I/O list, control loop, and logic diagram preparation Experience with ASRS , warehouse automation, WMS Working knowledge of Industry 4.0, IoT, Server & SQL integration Familiarity with servo tuning and industrial robots (advantageous) Maintain proper documentation (manuals, diagrams, licenses) Support team performance, goal-setting, and development Technical Skill Highlights: Must-Have: PLC Programming (at least 2 brands) HMI design Electrical product specification & selection Concept development and machine building Nice-to-Have (Optional): Electrical CAD Python / JavaScript / C for control systems Experience with SCADA, industrial robot programming SQL database interfacing Key Skills: PLC Programming, CIP, Profinet, SCADA, Communication Protocols, Industrial Automation, IOT, HMI, Servo Tuning, WMS, ASRS, Electrical Design Education Required: B.Tech (Electrical Engineering) B.E. (Electrical & Instrumentation Engineering)

Role & responsibilities Develop, modify, and troubleshoot PLC programs (e.g., Siemens, Allen-Bradley, Mitsubishi, or others depending on project requirements). Design and configure HMI screens for machine and process control (e.g., Wonderware, WinCC, FactoryTalk View, etc.). Collaborate with cross-functional teams (mechanical, electrical, production) to define automation requirements and implement solutions. Support the commissioning and startup of automation systems at customer or plant sites. Diagnose and resolve automation issues to minimize downtime and ensure system reliability. Prepare and maintain documentation, including control system architecture, wiring diagrams, and program backups. Follow safety protocols and comply with industry standards during installation and maintenance. Assist senior engineers with system design, testing, and validation procedures. Preferred candidate profile Experience with SCADA systems. Basic knowledge of robotics or motion control. Familiarity with ISO, GMP, or other quality standards (depending on industry).

Role & responsibilities -Knowledge of Fanuc & Panasonic Robot Knowledge & Hands on experience of Programming of Mitsubishi PLC & Keyence PLC Knowledge & Hand Experience of Programming of Mitsubishi & Keyence HMI Knowledge CC-Link Communication & it's working Knowledge of SAP-PM Module Preferred candidate profile Automotive Company Perks and benefits: Canteen Facility & Trasport Facility.

Role & responsibilities : Ensuring the Execution of PM as per Plan. Implements of Kaizens, poka yoke for down time, Cost reduction & quality improvement. Reduction in spare parts cost. Root cause analysis & implementing of actions. Hand on experience and technical skill weld shop-Seam & Spot welding machine, Robotic MIG & Spot welding cell for trouble shooting. Knowledge of IATF, EMS/OHS & SAP Requirements. Responsible for reducing down time and power cost in weld shop area. Attend the breakdown in Weld shop & CED Area. PLC & HMI fault analysis Mitsubishi preferred. Read & understanding of Electrical drawing & Circuit

Role & responsibilities • Ensure compliance with safety regulations, industry standards, and company policies. • Diagnose equipment faults, troubleshoot problems, and develop solutions to prevent recurring issues. • Develop and maintenance of PC based machines and test equipment. • Understanding pneumatic and hydraulic systems. • Perform routine and corrective maintenance, including repairs, replacements, and upgrades, to ensure equipment operates efficiently and reliably. • Machine cycle time reduction, production line automation, machine uptime improvements • Staying up to date with the latest technological advancements and best practices. • Strong understanding of mechanical, electrical as well as familiarity with various equipment types for automation and robotics. • Providing hands-on technical assistance and troubleshooting for equipment, systems, or machinery. • Leading and assisting with installations, commissioning, and upgrades of equipment or systems. • Identifying, diagnosing, and resolving complex technical issues. • Supervise maintenance staff, provide technical guidance, and train them on equipment operation and maintenance procedures. Please share your resume to srinivasan@leadhr.net & contact at 7200184394 Thanks & Regards N.Srinivasan Sr Manager Recruitment LEAD HR SERVICES PVT LTD No.11,Unit 502 504, 5th Floor, Challa Mall ,Thiyagaraya Road T. Nagar, Chennai - 600017. Landmark: Opp. to Globus Showroom Mobile – 7200184394 Mail – srinivasan@leadhr.net Web - www.leadjobs.in

Role & responsibilities 1. Proficiency in PLC programming languages and software, such as ladder logic, structured text, or function block diagrams. 2. Strong knowledge of industrial automation, control systems, and HMI development. 3. Familiarity with various PLC brands and models, such as Omron, Mitsubishi, Siemens, Allen-Bradley, Schneider Electric, etc. 4, Knowledge of communication protocols and networking in an industrial environment 5, Competency in independently designing, programming, and executing projects 6, Problem-solving skills and the ability to diagnose and resolve issues with automation systems Preferred candidate profile Immediate joiners are preferred

Job Description: - Well versed knowledge of PLC programming. PLC like Siemens, Allan Bradly, Mitsubishi. (Siemens Must) Offline and Online programming for power train SPM machines. Softwares like TIA portal, Siemens Safety PLC, Sinamic drives. Experience on different protocols like Profibus, Profinet, RS232, CC links etc. Should be well versed in development of code from scratch till final installation and proving. Understanding of electrical drawings Eplan P8-2.8. LabVIEW and Visual basic knowledge will be appreciated Individual handling of project in Controls perspective. Team oriented and good communication skill in terms of project handover and training. Please visit company website for more details www.jendamark.in

Motion based application designs, builds, and maintains software applications, translating client needs into functional software, while also testing, debugging, and documenting the applications.

You will be responsible for designing, developing, and commissioning PLC and HMI/SCADA solutions for our clients Siemens, AllenBradley, Mitsubishi ,Delta ,Siemens WinCC, FactoryTalk View & RSLogix5000 Mail to: Svsivaram@svue tech Call 9346660109 Required Candidate profile Bachelor’s degree in Electrical/Electronics/Instrumentation Engineering (B.Tech/BE). 3–5 years of handson experience in PLC/HMI/SCADA programming and commissioning. Ladder Logic, (FBD), (ST), SFC.

DESIGNATION AVP - Automation EXPECTATIONS We are seeking a strategic, technically sound, and hands-on Automation Leader to head automation initiatives across our three business divisions Coil Springs, Disc Springs, and Fasteners. The candidate will be responsible for driving innovation, improving process efficiency, solving quality challenges, and reducing manpower dependency by identifying and implementing intelligent automation solutions (both new and retrofitting existing machinery). QUALIFICATION BE / Diploma in Electronics, Electrical, Mechanical, Mechatronics, Instrumentation, Robotics EXPERIENCE 10-20 YRS SKILLS Technical: 1) Lead design and implementation of Special Purpose Machines (SPMs) and production lines. 2) Expertise in PLC, HMI programming, and control system integration (Siemens, Mitsubishi, Allen Bradley preferred). 3) Oversight of electrical and mechanical design, including control panel design and safety compliance. 4) Exposure to SCADA, IoT, and Industry 4.0 solutions will be an added advantage. 5) Hands-on experience with robotics, vision systems, pick-and-place units, and miniature component handling preferred. 6) Evaluate and retrofit existing machinery for automation. 7) Strong vendor network for SPM development and automation component sourcing. 2) Managerial: Visionary leadership and project management capability Strong analytical, commercial, and contractual awareness Excellent verbal and written communication Experience in leading cross-functional teams Vendor development and negotiation skills Fluent in English and Hindi/Marathi (preferred) Other : PLC, HMI, and SCADA programming Electrical and mechanical design of SPMs Pneumatics, hydraulics, servo systems Robotics and vision systems Industrial networking, sensors, and automation hardware Strong knowledge of fasteners or miniature component automation is highly desirable Project & Stakeholder Management: Create project budgets, timelines, and ROI analysis for automation projects. Ensure end-to-end execution of projects design, prototyping, testing, implementation, and handover. Conduct feasibility studies and process audits before proposing solutions. Monitor project KPIs uptime, cycle time, manpower reduction, and quality improvement. Maintain documentation, compliance, and safety standards LOCATION Near Thane-Bhiwandi Company Bus facility available from Thane, Kalyan, Dombivali, Badlapur, Virar. Canteen facility available

In-depth knowledge of PLC& HMI Programming with diverse Development Tools for software Design.Understand Requirements & translate in Application.Evaluate Existing Applications to Reprogram,Update & add new features.Troubleshoot & Debug Applications. Perks and benefits PF, Leave encashment, Bonus, Health Insurence

Key Skills- 1. Knowledge of weld shop domain 2. Mig welding, spot welding 3. Able to handle junior manpower. 4. Knowledge of PLC 5. Knowledge of Spare part Management 6. Knowledge of Robotics abnormalities

PLC Programmer in the machine building industry is responsible for developing, integrating and troubleshooting PLC, HMI, and SCADA programs for automation systems. The role involves wiring supervision, control panel testing and machine commissioning.

VMC Programmer Preferred candidate should have 5+ experience in very strong knowledge in 3D CNC programming in Mastercam/Powermill for precision components manufacturing for Aerospace, Medical Industry. Responsibilities for CNC Programmer Technical Roles Read technical drawings and set up the machines in accordance with the drawings. Use computer software Mastercam/Power mill to model cutting paths and program for 3-Axis and 4-Axis machines. Load 4 machines with programs for 24 hours running. Perform inline quality assurance tests to ensure products meet design specifications. Adjust machine cutting paths or settings to optimize production while maintaining quality. Consider tools required to cut particular materials and program machines accordingly. Troubleshoot and resolve problems with machines as they arise. Must have strong attention to detail. Work independently and closely follow directions is essential. Should be positive at work and professional attitude is expected. Should be available to work weekends and overtime as and when required. Supervisory Responsibility --Supervise the operators and guide them with optimum machine setting and operations. --Train new employees on VMC machine operations and programs. Growth opportunities --Involve and implement continuous improvements in quality and productivity. --Develop a assistant programmer for you to take next level responsibilities.

Key Skills: PLC Programming, MTTR, MTTB, Mitsubishi PLC, Delta, Maintenance, Breakdown About The Role : PLC Scada Programming, OR PLC Programming, Electrical equipment Maintenance, Doing root cause (Why Why analysis) analysis and manual check to identify defect/abnormality. Restoring the defective parts & removing the abnormalities Preparing for daily review meeting to discuss the maintenance issue. Taking machine trail and handover the machine for production. Coordinating with service engineers for execution of NPD & Improvement with ME Team for machine shifting activity Should have departmental discussion on issues /its resolution so that it should communicated to all concern for effective closure and no repetitions Following the prevent maintenance as per annual plan Analyzing the previous history of equipment before taking it for PM. Doing manual inspection of machine & equipment as per the Preventive Maintenance check sheet on daily & weekly basis. Restoring the defective parts & removing the abnormalities & taking corrective measures proactively. Inspect the machine equipments spare parts from time to time as per TBM calendar Verifying the equipment and spare part as per shelf life to analysis its condition Doing condition-based maintenance to increase the life of the equipment & continuous monitoring the equipment. Maintaining predictive maintenance/activity report Conducting quarterly preventive maintenance to avoid future breakdown Identifying critical and non-critical spare parts Maintaining the inventory of spare parts as per the lead time required to procure particular spare part. Reducing the inventory of parts and material by identifying and replacing with common part instead of using different parts. Identify the low cost & long-life parts & materials to reduce the cost of material and parts. Take follow up with Purchase department for timely availability of spare part Issuing spare part from Stores & installing the spare part Check Daily breakdown report & update in SAPt Maintaining preventive maintenance check sheet, machine history card, updating TBM calendar, predictive maintenance documentation 5s Audit documentation & pre and post report Suggesting kaizen for improvement & implementation Giving training to casual labor/apprentice

Job Title: Assistant Manager CNC Maintenance Department: Engineering / Maintenance Location: Mumbai Reports To: Manager & Senior Manager - Maintenance Qualification: B.E./B.Tech Mechanical / Electrical / Mechatronics Experience: 5+ years in CNC maintenance (preferably in manufacturing, precision engineering, or tooling environment) Job Purpose: To ensure optimal performance, uptime, and reliability of CNC machinery through preventive and corrective maintenance, supporting uninterrupted production and minimizing downtime. Key Responsibilities: • Maintenance Planning & Execution: 1. Plan and execute preventive, predictive, and breakdown maintenance for CNC machines (e.g., VMC, HMC, turning centers, wire-cut, EDM). 2. Maintain and update maintenance logs, history cards, and service records. • Troubleshooting & Repairs: 1. Diagnose mechanical, electrical, and PLC faults on CNC machines. 2. Coordinate with OEMs and vendors for complex issues and spare part procurement. • Performance Monitoring: 1. Monitor machine performance using TPM/OEE metrics and take corrective actions. 2. Conduct root cause analysis (RCA) for frequent or major breakdowns and implement CAPA. • Process & System Improvement: 1. Support upgrades or retrofits of CNC equipment. 2. Recommend improvements for energy efficiency, machine life, and tooling compatibility. • Team & Compliance: 1. Guide and train junior technicians. 2. Ensure adherence to safety, 5S, and ISO/TPM/Lean practices in the maintenance area. Key Skills & Competencies: • In-depth knowledge of CNC machine operations, controls (Fanuc, Siemens, Mitsubishi), and mechanics. • Hands-on experience with hydraulic, pneumatic, lubrication, and electrical systems. • Familiar with TPM principles, maintenance KPIs, and continuous improvement methodologies. • Good communication and vendor coordination skills. • Analytical mindset with problem-solving abilities. Desirable Qualifications (Optional): • Certification in CNC programming or maintenance. • Exposure to Industry 4.0 tools or CMMS systems

Proficiency in Mitsubishi PLC, particularly with Q Seriesand FX5U Series. Skilled in servo operation, with expertise in position andtorque modes. Experience working with motion cards. Required Candidate profile The candidate should be willing to relocate near our company location.

Company Name: Pioneer Machine & Automation Pvt. Ltd Location: NCR (Ghaziabad) /Pune Notice Period: Can join as soon as possible Experience: 3 to 10 years Job Title: Engineer / Senior Engineer / Team Lead - Industrial Automation Job Summary: We are looking for experienced professionals with a strong background in PLC Programming, Robot Programming, HMI Configuration, Servo Motors & Drives, VFDs, and other industrial automation applications. The ideal candidate will be responsible for project execution, commissioning, and troubleshooting automation systems across multiple industries, ensuring high-quality work and customer satisfaction. Roles & Responsibilities: PLC Programming, HMI Configuration, Servo Drives, VFDs, and Power Supplies (SMPS) for industrial automation projects. Installation, wiring, integration, and commissioning of automation components. Handling automation applications across Automobile, FMCG, Pharma, Sorting Systems, Textile, and other industries. Managing projects independently from concept to final execution. Ensuring quality control in field wiring and instrument installations. Diagnosing and resolving technical issues to keep equipment operational. Training and guiding technicians on system setup and maintenance. Preparing and cross-checking electrical drawings as per client requirements. Preferred Skills & Expertise: Project handling experience in Special Purpose Machines (SPM), Robotics, and Factory Automation. Strong programming skills in Special Purpose Machines, Robotics Cells, and Assembly Lines. Experience in project management and service support. Good communication and troubleshooting skills. Additional Preferred Qualifications: Knowledge of .NET (VB.NET or C#.NET) is an added advantage. Robotic Simulation experience is an added advantage. Qualifications Required: B.Tech / B.E in Electrical / Instrumentation / Electronics Engineering. How to Apply: Interested candidates can directly apply through Naukri or send their resumes to arpana@pmalgroup.com or WhatsApp their CV to 08826990159.

Location : Neemrana Qualification : Diploma/B.Tech Electrical/Electronics Experience :min 4 years Designation :Engineer/ Sr. Engineer JOB DESCRIPTION : Should have technical knowledge of various Electrical Automation Siemens, Omron, Mitsubishi systems. 1. To plan yearly/monthly preventive maintenance activities for the smooth & reliable operation . 2. To ensure availability of critical/normal spares with required inventory levels. 3. To Carry out activities for internal Quality Audits & ISO Audits. 4. To prepare MTTR/MTBF & machine history data for weekly/monthly MIS. 5. To lead & assign job/activities to subordinates & provide them resources to carry out these activities. 6. To prepare Ringi for new spare procurement & their sign off/negotiations accordingly. 7. To maintain services for new machine installation & commissioning details . 8. To have cross functional team interactions & support for line Poka Yoke & improvements. Knowledge, Skills, Abilities (KSAs) required to successfully perform the job: Knowledge about various Electrical/Electronic/Mechanical machines & systems . Skills: Should have skills of integrated maintenance with manual/automatic systems & their theoretical basics. Should be competent working under a time bound situation. Abilities: Should have good abilities in Computers like Excel , Power point , MS Word etc. Should be able to lead team meetings & job allocation to subordinates. Should be able to work as per the lay down systems of the company which includes the ISO/Process knowledge. Technical/Function Competencies : 1. Should have Technical knowledge of various Electrical/Mechanical/Pneumatic/Hydraulic systems. 2. Should be able to define the root cause of machine/equipment failure. 3. Should be able to define the alternate solution for critical equipment’s. 4. Should be able to plan/arrange required spares/equipment’s for smooth plant operation. 5. Should be able to perform preventive maintenance activities in the plant. 6. Should have able to guide subordinates & impart technical trainings to them.

Execute monthly and weekly preventive maintenance plan. Critical spare inventory management. Handle breakdown maintenance related to PLC and Drives Handle Programming PLC,Servo & VFDs-(Omron,Mitsubishi,Delta etc.) Prepare CAPA for machine breakdown and finalise with reporting manager Maintain Critical Spare part list and inventory for critical machines Handle day to day functioning & maintenance of utility. Handle fabrication related activities Act as a member of CFT for Erection, commissioning and installation of new machines Act as a CFT member in movement and installation of machines in case of relayouting Electricity generation & consumption data collection and reporting Execute electricity conservation measures as per guidance Ensure complaince to IATF & EHS audit requirements Training of manpower and maintaining updated skill matrix Grievance Handling SGA, Kaizen and 5s Experience: 6-10 Years Education: Bachelor of Technology(Mechanical,Electrical,Electrical & Elecronics,Electronics & Communication,Instrumentation) Industry-Automobile/Autocomp

Job Roles & Responsibilities: Person should have worked in plant maintenance or machine building - and hand on experience in SPM, automatic machines, automatic assembly lines, and machine maintenance. Person should be able to work in shift time and attend automatic m/c's & automatic assembly lines. Electrical breakdown & preventive maintenance. Hands on experience of machine electrical control panel's wiring and panel building. Hands on experience of programming of PLC system, HMI, Servo etc. Hands on experience in Pneumatic system like air cylinders, Solenoid valves etc. Specific Skills Set: Industrial automation and control, PLC Programming. If interested, please share below details in reply to this email along with your resume. Current CTC: Expected CTC: Notice Period: Ok to relocate Faridabad, If Shortlisted: Are you ok for signing up a two year contract(Permanent): Current Location: Total no. Of years of experience: Qualification: Please mail resume on hrd10@polymedicure.com

Role & responsibilities Automation Engineer Insmart Systems Experienece : 5 - 10 years Location: Hyderabad Job description Role : Automation Engineer Industry Type :Industrial Equipment / Special Machinery Manufacturing Department: R&D/ Production, Manufacturing & Engineering Employment Type : Fulltime Role Category : Automation Engineering Key Result Areas: Ontime completion of error free programming in PLC (Mitsubishi/Siemens) and SCADA development (Siemens) Maintaining proper revision history. Maintaining Backup. Developing, commissioning and maintenance. Travel to site as and when needed for commissioning and trouble shooting Documentation and SOP preparation Responsibilities: Design,Develop and create HMI screens, databases, alarms, and events to meet the operational requirements of Insmart Develop PLC ladder logic programs for machines. Design, code, and test control programs to meet the requirements defined by SCADA Admin for the control system. Interpret field electrical diagrams Design and create programs within SCADA system that interface with internal and external data sources Create a work environment that is consistent with the Companys Purpose, Vision & Core Values Trouble shoot and provide solutions. Required Candidate profile B Tech/ BE Mechanical Engineering or Electrical or Electronics Engineering with more than5 years of PLC ladder logic development and scada programming skills Proactive to take initiative in addressing and solving issues Proficient to advanced computer skills with Microsoft Office Proficient experience working on computer system hardware, and operating system software. Proficient in VBS, XML, C#, and VBA. Proficient working knowledge of Instrumentation, Flow Computers wiring, configuration, and programming. Excellent verbal and written communication skills; effectively converse with all levels of the company, customers, business associates Professional integrity and accountability Work in fast-paced, collaborative environment Ready to travel 20 days per month at a stretch to industry belts and other remote areas. Preferred candidate profile Education: UG : B.Tech/B.E. - Electronics/Telecommunication, Instrumentation, Mechanical, Metallurgy, Mining Key Skills SCADA Designing HMI Programming Mitsubishi Plc Industrial Automation HMI Siemens PLC PLCProgramming Automation Engineering Scada Programming SCADA