15 Iec 61850 Jobs

This is a full-time role with our global engineering/EPC organization. Key Responsibilities: Planning, Design review, and Monitoring - Plan Engineering deliverables and prepare Master Drawing List (MDL), monitor Engineering progress of projects and take proactive actions to complete SCADA designs on or before of Schedule. Provide Value Engineering and Optimization ideas, Conduct workshops for implementation Bring/Knowledge in best practices in Design and Engineering aspects Review the SCADA scope conceptual, outline and detailed design Carry out design review of documents/ drawings Ensure compliance with the design with client requirements, applicable codes, and regulations. Interface with the other disciplines such as Signaling, Power supply Authority, Rolling stock, Power supply contractors, SCADA Vendors etc. Review of drawings and designs submitted by contractors and consultants. Review equipment vendors drawings/documents. Candidate should also be able to guide the design team to review the equipment vendors drawings. Detail Engineering - Prepare design/drawings related to SCADA/SAS systems for RSS/AMS/TSS/ASS, OCC/BCC etc. RSS/TSS/AMS/ASS - Prepare SCADA network diagram, and bill of materials (BOMs). Significant experience in building complete SCADA Systems for conception to set up/ development/implementation/rollout of SCADA facilities at RSS, TSS, SP, SSP substations (RTUs, Transducers, Transformer cards IEDs etc.). Candidate should have rich knowledge of RTUs/SAS Systems running on SPORT and IEC-60870-5-104 Protocol, monitoring/control centers (RCC/OCC) and Redundant Data communication setup. Knowledge of RSS/ASS/TSS Panel, interlocking, Interface with database of SCADA, Knowledge of IEC 60870-5-104 and IEC 61850, MODBUS, IEC-60870-5-101 protocols, Distribution Management System (DMS), Video Surveillance System (CCTV) & Access Control System (Intruder Detection System), Familiar with Control and Protection panel Circuit Diagram. Knowledge of NIST 800-82 standards, ICS Cybersecurity and Networking Infrastructure for SCADA System. Candidate leads the specification and deployment of solutions within the SCADA business and continually refine best practice. Assists the bid team in their need to offer and provide cost efficient systems. Design of complete SCADA System and Substation Automation System (SAS). Design of SCADA/SAS detailed design, SCADA BOQ, IO Lists, SCADA/SAS Drawings, Interface Design documents. Provide technical support for SCADA Projects within the business. Provide technical support to the site execution and commissioning team as and when required. Review the Vendors technical documents and BOQ. Design Management and Technical Leadership Leading a mid-size team of design engineers/ draughts person and developing the team to take up challenging assignments Provide technical guidance to the site engineering team and coordinate with client (Metro/PMC/Railway) for approval of design drawings. Develop operation and maintenance plans and standard operating procedures; prepare O&M manuals and may conduct on-site training of personnel. Capable of leading a team and handling multiple projects/ multiple activities. Review the workload with individual engineer/ sub-team and manpower planning Knowledge and exposure Should have sound knowledge of Indian Railway ACTM & RDSO Standard and latest development in RSDO/IR/Metro Experience working with RVNL/CORE/PGCIL/Metros/DFCCC/RRTS Pre-Bid Design: - Study of tender documents and to prepare technical queries Working out optimized BOQs, comparison with client provided quantities and helping the BD team in putting the most competitive bid. Evaluation of Technical offers. Review of tender BOQ prepared by team, critically analyze, and provide guidance to the team Taking lead in any technical discussion with customer or Vendor. Preparing management report on engineered quantity and participate in tender discussion with management. Key Competencies: Experience in detail design of SCADA system for AC/DC Traction Power System including Aux. Power. Experience in Detail design/ pre-bid engineering of SCADA/SAS, OCC/BCC. Candidate with experience in Metro OHE/Railways will be preferred Thorough understanding of different OCS systems like 25kV AC, 750/1500V DC, 33kV Aux. power etc. Experience in detail engineering of complete SCADA/SAS system for GIS substation/TSS/ASS will be preferred Knowledge of various standards like, IEC, EN, ISO, Indian standards etc. Knowledge of Protection Relays, BCPU/BCU, SCADA Integration/Testing & commissioning, CRP etc. of systems. Desired qualification: BE/B. Tech/ME/M. Tech in Electrical/Electronic Engineering Experience required: 10-15 Years for B-Tech./ 8-12 years for M-Tech Reports to - Group Head/LEAD Engineering Services Show more Show less

Looking for challenging roleIf you really want to make a difference - make it with us Can we energize society and fight climate change at the same time At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world's energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you A snapshot of the day We are seeking a highly skilled and experienced Substation Control and Protection - Testing and Commissioning Engineer to join our team. The ideal candidate will be responsible for the testing, commissioning, and troubleshooting of substation control and protection systems to ensure their proper functioning and reliability. The candidate should have strong technical capabilities, excellent problem-solving skills, and the ability to work effectively in a team environment. Conduct testing and commissioning activities for substation control and protection systems, including relay testing, scheme testing, and protection coordination studies. Configuration, parametrization, goosing, interoperability, and integration of Protection IEDs with SAS systems. The design, engineering and implementation of substation protection systems to optimize monitoring, control, and protection functions within electrical substations. Responsible for preparation & approval of engineering document like FDS, SLD, PSLD, Signal List, Bill of Materials, General Arrangements (internal & External), Panel heat load calculation. Preparation of Testing & Commissioning documents such as FAT, SAT, Test Reports, and Schedule Plans. Troubleshoot and resolve complex technical issues related to substation control and protection systems. Collaborate with other engineering teams to ensure seamless integration of substation control and protection systems with overall substation design. Provide technical support and training to junior engineers and field personnel. Experience in supporting the factory during manufacturing, mounting of equipment & wiring, testing and pre-FAT test & FAT witness. Knowledge in cubicle AC & DC load calculation Selection of suitable equipment/material. Your new role - challenging and future- oriented: In-depth knowledge of substation control and protection systems, including relay settings, protection schemes, and control logic. Strong understanding of substation automation systems, networking and protocols, such as IEC 61850, Modbus TCP/IP. Knowledge of Process Bus Technology. Experience with substation testing equipment, such as relay test sets, power system simulators, and fault recorders. Proficiency in analyzing and interpreting relay and protection coordination studies. Familiarity with substation design standards and regulations. Parameterization, testing and commissioning of IEDs like Protection relays and Bay Control Units (BCUs). Experience with protection & control equipment and solutions preferably from Siemens, Alstom, SEL, GE, Hitachi, ABB make IEDs. Retrofitting and troubleshooting of Protection IEDs, including the replacement of CRPs. Willingness to travel as the role demands a minimum of 50-70% travel overseas. Knowledge of Major AIS & GIS components like Circuit breakers, Isolators, CSD, PDM & Interlocks scheme. Knowledge of Transformers/Reactors & associated Conditional Monitoring Devices etc. (Preferred) Planning and execution of training courses and customer presentations. Software Skills: Proficiency in using substation testing software, such as Omicron Test Universe, Doble Protection Suite, or similar. More weightage for candidates with hand on experience in substation automation software and protocols, including SAS systems and communication protocols (e.g., Modbus, DNP3). We don't need superheroes, just super minds: This position requires a bachelor's degree or equivalent with background in Electrical Engineering. Bachelor's degree in electrical engineering or related field. 3-6years of experience in testing and commissioning of substation control and protection systems. Professional certifications, such as Certified Relay Technician (CRT) or Certified Protection Professional (CPP), are desirable. More weightage for candidates with hand on experience in Global Project handling. Soft Skills Excellent Communication (Both written & verbal) & Inter-personal Skills. Critical thinking, reasoning and problem solving are an essential part of this position. Enjoys learning new things and build knowledge base in new area. Enjoys working in Team environments, Exhibits collaboration in multiple stake holder interactions. Adaptive and eager to learn and work on new technologies. Innovative, self-driven, and disciplined. Strong analytical ability and problem-solving skills

Can we energize society and fight climate change at the same time At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world's energy systems. Their spirit fuels our mission. Substation Automation Engineer We are seeking a skilled Substation Automation Engineer with expertise in designing and implementing automation systems for electrical substations. The ideal candidate will be responsible for developing and integrating advanced technologies to enhance the monitoring, control, and protection of substation equipment. The candidate should possess a strong understanding of software systems, implementation, and maintenance of advanced automation systems for electrical substations. The successful candidate will be responsible for leveraging their knowledge and experience in substation automation design to enhance the operational efficiency and reliability of substations. This role requires a strong understanding of various technologies and software systems, as well as the ability to collaborate effectively with cross-functional teams and stakeholders. oriented: The design, engineering and implementation of substation automation systems to optimize monitoring, control, and protection functions within electrical substations. Responsible for preparation & approval of engineering document like FDS, System Architecture, Signal List, Bill of Materials, General Arrangements (internal & External), Panel heat load calculation. Preparation of Testing & Commissioning documents such as FAT, SAT, Test Reports, and Schedule Plans. Knowledge of PC Networking, switch, router, GPS, Firewall, Cyber Security Substation Automation: Process Level, Bay Level, Control Level OS and Tools: Windows, PC Applications, PC communication, serial/ IP networking. Debugging tools: Mods can, IEC Tester, IED Scout, Wireshark Integrate intelligent electronic devices (IEDs), RTUs (Remote Terminal Units), Gateways, and human-machine interface (HMI) systems to enable remote monitoring and control capabilities. Develop and configure communication networks and protocols, such as IEC 61850, IEC60870-5-101/103/104, DNP3, OPC and Modbus TCI/IP to facilitate seamless data exchange and interoperability Knowledge of Process Bus Technology. Experience in IO Mapping with respect to the scheme drawings/troubleshoot of database issues in SAS system / RTU based system. (Know-how) Develop and maintain standardized parameterization procedures for substation automation equipment to optimize performance and interoperability Collaborate with engineering teams to ensure accurate and efficient parameterization of substation automation systems Stay updated with industry standards and technological advancements in substation automation design and implementation Work experience on Siemens SICAM (PAS, Toolbox, WinCC, SCC) solution, Hitachi Micro SCADA, GE DS AGILE) Planning and execution of training courses and customer presentations. Willingness to travel as the role demands a minimum of 50-70% travel overseas. We don't need superheroes, just super minds: Bachelor's degree in electrical engineering or a related field 5 to 8 years of experience in substation automation design and implementation Proficiency in software systems such as SAS, RTU programming, HMI development, and networking protocols Strong knowledge of substation automation principles and communication protocols (e.g., IEC 61850, IEC-101/104 DNP3, Modbus TCP/IP) In-depth understanding of substation parameterization and additionally configuration for IEDs and control systems Experience in developing and implementing standardized parameterization procedures for substation automation equipment Soft Skills Excellent Communication (Both written & verbal) & Inter-personal Skills. Critical thinking, reasoning and problem solving are an essential part of this position. Enjoys learning new things and build knowledge base in new area. Enjoys working in Team environments, Exhibits collaboration in multiple stake holder interactions. Adaptive and eager to learn and work on new technologies. Innovative, self-driven, and disciplined. Strong analytical ability and problem-solving skills. Ability to manage multiple projects and prioritize tasks effectively We've got quite a lot to offer. How about you This role is based at Site (Pune). You'll also get to visit other locations in India and beyond, so you'll need to go where this journey takes you. In return, you'll get the chance to work with teams impacting entire cities, countries - and the shape of things to come. We're Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow.

Hiring Firmware/SCADA Engineer (3–4 yrs exp) for BESS. Responsibilities: EMS design, PCS/SCADA/BMS integration, control strategies, HIL testing, troubleshooting & documentation. Req: BE/B.Tech, SCADA/EMS exp, Modbus, IEC 61850 & grid code expertise.

Responsible for designing, testing, commissioning, and maintaining power system protection schemes to ensure safe and reliable operation of MV/HV networks. Proficiency in ETAP, DIgSILENT, or ASPEN; relay configuration tools (SEL, Siemens, ABB). Required Candidate profile Bachelor’s degree in electrical engineering (Power Systems preferred). Develop single line diagram using industry-std tools, Develop RTU config and SDACA and integration testing for EMS substation.

Job Description Summary Job Description Roles And Responsibilities Function Integration of IEDs with various protocols, Configure, Test/Validate, trouble shoot the SAS database. Release technical design drawings, documents and database to Internal Test team for inspection. Co-ordinate with stakeholders like FAT team for internal validation and participate in customer FAT as required. Provide support to the service team to resolve technical issues and snag lists. Co-ordinate with Product Line for closure of technical issues in design, FAT & SAS commission. Share Return of Experience across the team & implement the applicable RoEs in design phase. Study of Technical Specification, Contract/customer requirements, technical inputs Prepare the DCS Design Concept, Design strategy, List of deliverables, finalise bill of quantity/ budget man-days, identify risk & mitigation plan based on the products & tender documents. Finalize IEDs, Bought-on-Job materials and raise purchase requisition to meet the delivery schedule. Preparation & Validation of Technical Design, Engineering Documents / Drawings, Sub Station IO List. Visit/Attend Customer discussions to secure document approvals, prepare compliance to customer observation/comments as required. Manage technical interface with sub suppliers & partners. Technical support for project at ITO stage. Travel for customer visit / site if required. Adhere to all safe working procedures in accordance with EHS instructions. Time schedule & On Time delivery Participate with Engineering Leader / Project Manager and finalize deliverables and project plan Manage design time spent on relevant activities Ensure on-time delivery of Quality design deliverables On weekly basis provide Team lead and /or PM with project reviews Project strategy, risk management, Process & Tools Follow project strategy & highlight scope or design changes (data for claims, VO) Propose quality & cost-effective solutions. Track, manage & mitigate identified or potential deviations / risks. Comply with GE Quality Procedures, work instructions and process for seamless project execution. Anticipate and mitigate delivery issues and recommend change Qualification Bachelors degree in electrical & Electronics or Electrical Engineering or equivalent. Relevant field experience of 3 to 5 years in SAS Engineering/Commissioning. Independent to handle the project Engineering, Customer discussion/approvals, Test, validate & troubleshoot the SAS products/system. Broad knowledge on Substation Automation System Engineering, Communication architecture, Industrial protocols like IEC 61850, Modbus, T104, Network concepts (Layer-2 &3), Process bus based Digital Substation, Automation and control system standards and regulatory compliance. Experience to integrate IEDs of multiple vendors like Hitachi, Siemens, SE, SEL; DCS/Network Troubleshoot tools. Expertise in cybersecurity best practices and security hardening techniques for industrial control systems. Basic Knowledge on Engineering process, Protection, Commissioning of SAS systems, India region utility/industry practices and standards. Desired Characteristics Strong oral and written communication skills Strong interpersonal and responsive skills Ability to work independent & Problem-solving skills Proficient to Work with cross function teams. Collaboration and Teamwork; Innovation; Convince and Influence Additional Information Relocation Assistance Provided: Yes Show more Show less

Job Description Summary HMI Engineer is responsible for the Development of the Next Generation HMI, work towards to complete the development successfully. Works with global stakeholders and 3rd party HMI vendors to come up with the best system solution for HMI. Job Description Roles and Responsibilities Developing, Deploying of SCADA system. Designing the hardware & software functional specification for the Project. Knowledge in Iconics and PCVue SCADA system & if knowledge is in iFIX, Cimplicity, Intouch SCADA will be added advantage. Work on HMI applications development to meet the customer needs and upcoming cyber requirements. Designing, implementing, and supporting industrial communication networks for control system applications. Supporting Engineering Services field personnel in the technical resolution of field problems. Providing assistance with quality assurance on projects Desired Characteristics Demonstrated experience working with industrial network communication protocols such as OPCUA/DA,IEC 61850, Modbus, TCP/IP, Profibus etc. Experience in configuring interface drivers such as Matrikon drivers will be added advantage. Network Architecture knowledge HMI Server Client Configuration, Redundant Server Configuration. Historian Knowledge, Configuring & knowledge of Alarm Management (Historical, SMS, Email, Voice). Report Generation Knowledge (Shift/Batch/Day) with Backend SQL & MS Access. Strong background in HMI application development for Iconics, PCVue products or any other HMI packages, experience in back-end scripting (VBA Scripting knowledge, C, C++ knowledge added advantage), interface with database such as SQL, MS Access etc. Demonstrated experience in the development and application of virtual machines in a Microsoft Windows operating environment is an added advantage. Strong computer skills: experience setting up Windows based applications such as Windows 10 and above proficiency in standard MS Office applications. Technical skills in HMI design engineering, commissioning experience is added advantage. Knowledge in web HMI. Proven team player with solid cooperation, flexibility and demonstrated capacity to learn complex information quickly. Field experience in related equipment. Good oral and written communication skills. Qualifications/Requirements Bachelors /Masters Degree in relevant engineering or equivalent knowledge / experience with 4+ Years of Experience Significant software development experience for HMI like Iconics, PCvue, Ifix, Cimplicity. Additional Information Relocation Assistance Provided: Yes Show more Show less

Khatib & Alami Hiring for Sr. Engineer / Sr. Project Engineer Protection and Control (Substation Design) Location: Bangalore Design Center Department: Power and Renewables Transmission Reporting To: Associate Principal / Director Power and Renewables Job Summary: We are looking for a skilled Sr. Engineer/Sr. Project Engineer Protection and Control with strong expertise in Substation Design (up to 400kV, AIS & GIS) to join our Infrastructure Division. The role involves delivering high-quality protection and control designs, leading project design teams, managing client coordination, and ensuring adherence to budgets and schedules for international Transmission & Distribution projects. Key Responsibilities: Lead and deliver Secondary design engineering for substations (SLDs, CT/VT, interlocks, SCADA, SAS, protection). Perform CT/VT sizing, relay setting calculations, SCADA/SAS integration. Prepare technical specifications, review vendor documents, and ensure design compliance. Coordinate with global K&A teams and clients to ensure timely, high-quality project delivery. Provide support for proposals, resource planning, and man-hour estimation. Qualifications & Skills: Education: B.E./B.Tech or M.E./M.Tech in Electrical Engineering. Experience: Sr. Project Engineer: 1216 years Sr. Engineer/Project Engineer: 812 years Gulf region substation experience is a plus. Technical Skills: Strong understanding of Substation Design (AIS & GIS up to 400kV) Familiarity with IEC, IEEE, SEC, Aramco standards Tools: AutoCAD, MS Office, PowerPoint, ETAP (basic) Protocols: IEC 61850, DNP, Modbus, GOOSE, TCP/IP Soft Skills: Excellent communication, leadership, and problem-solving skills Preferred Background: Experience in working with utilities, EPCs, or design consultancies in the T&D domain. Knowledge of protection coordination, SAS systems, SCADA RTU upgrades, and telecom system extensions.

Job Description for Sales Executive- Substation Automation System (SAS) Job Overview: We are seeking a motivated and technically sound Sales/Proposal Engineer for our Substation Automation System (SAS) division. The candidate will be responsible for preparing detailed technical and commercial proposals for utility, industrial, and infrastructure customers. This is an in-office role based in Kharghar, Navi Mumbai. Key Responsibilities: 1. Proposal & Offer Preparation: Study customer specifications and tender documents related to Substation Automation (IEC 61850-based systems, RTUs, HMIs, SCADA). Prepare techno-commercial offers including BOMs, solution architectures, and cost sheets. Coordinate with OEMs and internal teams for pricing and technical clarifications. 2. Customer Communication: Interact with customers via email/phone to understand exact technical requirements. Provide pre-bid clarifications, deviations, and compliance statements. 3. Documentation & Records: Maintain records of submitted offers, revisions, and communication trails. Create proposal templates, datasheets, and system architectures in line with company standards. 4. Product & Solution Knowledge: Understand SAS components: IEDs, Gateways, HMI/SCADA software (e.g., Siemens SICAM, Zenon COPADATA), protocols (IEC 61850, Modbus, DNP3). Stay updated with competitor solutions and market trends. 5. Coordination & Internal Support: Work closely with Sales, Engineering, and Procurement teams for complete proposal lifecycle. Support sales executives in pricing justification and technical backup during negotiations. Qualifications & Skills: Education: Diploma/B.E./B.Tech in Electrical / Electronics / Instrumentation / Power Engineering Experience: Minimum 1 to 5 years in Substation Automation / Control & Relay Panels / Protection Systems Technical Skills: Knowledge of IEC 61850 architecture and SCADA systems Experience in preparing proposals, BOQs, compliance sheets Proficiency in MS Excel, Word, AutoCAD (basic level), and email communication Soft Skills: Strong written and verbal communication Attention to detail and structured documentation Time management and ability to handle multiple inquiries Compensation: Based on experience and interview performance Includes fixed CTC + performance-based incentives Interested candidates can email on [HIDDEN TEXT] or call on 73049 95406

Associate Software and OS Principal Engineer will be part of Automation Engineering team. This role will act as a key expert for OS Software engineering team and guide / assist for developing software for next generation products like Remote Terminal Unit (RTU) and other Lucy Automation products for Distribution Automation utilizing the skills, tools, and processes within the global team. This role will guide in interpreting customer requirements, filed applications and testing and certification requirements. Job Context: The duties and responsibilities of the Associate Software and OS Principal Engineer Maintain high standards of software quality within the team by establishing good practices and habits. Identify and encourage areas for software growth and improvement within the team. Review source code, procedures, manuals and other documentation on the status, operation, and maintenance of software. Assist with the development of software product documentation. Collaborate with other software, hardware and ATE developers in the team and at other sites to plan, design, develop, test, and maintain Automation product software releases. Maintain high degree of integrity and traceability for software updates and changes. Provide technical leadership to team members through coaching and mentorship. Assist in the collection, documentation and interpretation of users requirements, development of user stories, estimates and work plans. Review and guide design, development, and unit test applications in accordance with established standards. Participate in peer-reviews of solution designs and related code. Package and support deployment of releases through proper channels and checks. Identify standard legal and regulatory compliance requirements for products and guide the team in achieving those. Identify additional verification and validation tests to enhance reliability of automation products. Be part of technical discussions with internal and external customers as and when needed. Assist in RCA of field issues, 8D improvements and identifying and implementing corrective and preventive actions. Qualifications, Experience, & Skills: Minimum Graduate degree in a relevant subject (Electronic Engineering or equivalent). Minimum 12 to 18 years of hands-on engineering experience in similar industry / domain. Associate Software and OS Principal Engineer at Lucy Electric is innovative, flexible, methodical, patient, logical, enthusiastic, and open to new ideas. He/she will work in teams and enjoy learning and sharing knowledge. Job-Specific Skills: Essential strengths: C++ programming languages GNU tool chain (GCC, GDB, Cross Compiler, JTAG) Linux, Yacto ARM architecture. Development of Embedded real time applications Source code management tools like GIT, Subversion (SVN), SourceSafe Unit testing methodology Familiarity with bug tracking and traceability tools like OpenProject, JIRA, Bugzilla UML (Unified Modelling Language) XML or HTML Eclipse IDE (Integrated Development Environment) Continuous Integration tools such as Jenkins, Hudson Protocols such as IEC 104/101/103, Modbus Serial/TCP IP, DNP3 Serial/TCP IP, IEC 61850, HTTP, and protocol test tools Desirable strengths: Real time operating systems Multiprocessor software architecture Device drivers like CAN bus, I2C, SPI, Ethernet, Serial XML Schema design XSLT (XML Transformations) Unit testing frameworks such as C++ Unit Behavioral Competencies: Good interpersonal skills with a pleasant and can-do attitude Willingness to work and thrive in professional team. Ability to cope with work pressures and go the extra mile.

Sr Cyber Security Engineer will be part of the Automation Engineering team, developing the cyber security software for next-generation Remote Terminal Unit (RTU) and other Lucy Automation products for Distribution Automation utilizing the skills, tools, and processes within the global team. Sr Cyber Security Engineer will provide technical and team leadership through coaching and mentorship. Description of the Accountability Design, implement and test Cyber Security software for our range of RTU s and other Lucy Automation products, Design reviews, Strict version control Cyber Security Software Documentation, Content for User Documentation, Prepare and maintain Test specifications and Conformance Test cases Guide/supervise the preparation of Conformance test set up and carry out testing as per the test plan Capture, document and report test results and observations Trouble shooting and hands on build-up/repair/rework of engineering samples and Test Set ups Coordinate and deliver in cooperation with other project teams, assist with project planning and reporting Job Context Developed Cyber Security features for Automation product. Provide technical leadership to teammates through coaching and mentorship. Maintain high standards of software quality within the team by establishing good practices and habits. Identify and encourage areas for growth and improvement within the team. Collaborate with other site software developers to plan, design, develop, test, and maintain Automation product software releases. Assist in collecting and documenting users requirements, developing user stories, estimates and work plans. Prepare reports, manuals and other documentation on softwares status, operation and maintenance. Assist with the development of product documentation. Design, develop, and unit test applications in accordance with established standards. Participate in peer-reviews of solution designs and related code. Package and support deployment of releases. Work with teammates in the migration of legacy applications to current technologies. Develop, refine, and tune integrations between applications. Analyse and resolve technical and application problems. Assess opportunities for application and process improvement and prepare documentation of rationale to share with team members and other affected parties. Adhere to high-quality development principles while delivering solutions on-time and on-budget. Provide third-level support to business users. Research and evaluate a variety of software products QUALIFICATIONS, EXPERIENCE, & SKILLS: Graduate in Electronics Engineering or equivalent Minimum 7-9 years of working experience in similar industry Essential strengths: C and C++ programming languages GNU toolchain (GCC, GDB, Cross Compiler, JTAG) Linux, Yacto ARM architecture Development of Embedded real-time applications Source code management tools like GIT, Subversion(SVN), SourceSafe Unit testing methodology Familiarity with bug tracking and traceability tools like OpenProject, JIRA, Bugzilla UML (Unified Modelling Language) XML or HTML Eclipse IDE (Integrated Development Environment) Continuous Integration tools such as Jenkins, Hudson Knowledge of Role Based User Account Management (UAM) integrated with the Web Server. Cyber Security knowledge IEC 62351, NERCIP, encryption algorithms, IEEE 1686 Protocols such as IEC 104/101/103, Modbus Serial/TCP IP, DNP3 Serial/TCP IP, IEC 61850, HTTP and protocol test tools Desirable strengths: CMake (Cross-platform Makefile generator) Design using State Machines, State Machine tools such as SMC Code quality analysis tools such as Klocwork, Lint, LDRA, MISRA Firmware, Configuration and Patch management. Real-time operating systems Multiprocessor software architecture Device drivers like CAN bus, SPI, I2C, SPI, Ethernet, Serial XML Schema design and XSLT (XML Transformations) Unit testing frameworks such as C++ Unit Inter-process communication using Zero MQ Behavioral Competencies: Good interpersonal skills with a pleasant and can-do attitude Willingness to work and thrive in a professional team Ability to cope with work pressures and go the extra mile

Verification & validation of substation automation products. Participate in test core team workshop to understand the product test requirements and performs software/domain test activities on system/product projects, including design, coding, and black box testing of software modules in line with the quality management system Develop new and adaptive design of test cases for system and product requirements. Report & verify the test defect logs captured during the testing phase of the assigned product. Partner well with a variety of different product stakeholder groups, including management at different levels, business analysts and developer s community. Technically responsible to ensure the mutual consistency and efficient integration of the several subsystems in modular, easy-to-maintain and extendible software that meets the product specification. Requirements Bachelor or master s degree in Electrical / Electronic Engineering with 3-8 years of practical experience in Substation Automation. Experience in Substation Automation protocols like IEC 60870-5-101/104, DNP 3.0, IEC 61850 is must. Working knowledge in PRP/HSR, PTP, SNTP, SNMP is required. Working knowledge of tools such as TFS, ALM, Test management system etc Knowledge on various Test automation tools and scripting (Python, C#) Knowledge on OOPS concept and Robot automation framework will be added advantage

We are seeking an experienced Project Manager to lead and oversee power transmission and automation projects, ensuring successful execution from initiation to completion. The ideal candidate will be responsible for managing project scope, budget, schedules, and technical deliverables while coordinating with stakeholders, engineering teams, vendors, and regulatory bodies. Key Responsibilities Lead and manage high-voltage power transmission and automation projects, including substation automation, SCADA, EMS/DMS, and protection systems. Develop project plans, schedules, and risk management strategies to ensure timely and cost-effective execution. Oversee the design, procurement, installation, testing, and commissioning of transmission and automation systems. Coordinate with utilities, regulatory agencies, EPC contractors, and vendors to ensure compliance with technical and safety standards. Ensure adherence to industry standards such as IEEE, IEC, NERC, and ISO for power system operations. Lead project progress reviews, risk assessments, and change management processes. Manage project documentation, contracts, and reporting to stakeholders. Ensure proper integration of SCADA, automation, and protection systems with existing infrastructure. Implement HSE (Health, Safety & Environment) best practices to ensure workplace safety and regulatory compliance. Provide leadership and mentorship to project teams, ensuring alignment with company goals. Required Qualifications 10-15 years or more of experience in managing power transmission and automation projects. Strong knowledge of high-voltage substations, transmission lines, SCADA, and automation technologies. Experience in project planning, budgeting, scheduling, and contract management. Familiarity with SCADA/DMS systems, automation protocols (IEC 61850, DNP3, Modbus), and grid protection schemes. Excellent leadership, communication, and stakeholder management skills. Proficiency in project management tools (MS Project, Primavera, SAP, etc.). Ability to handle multiple projects in a fast-paced environment. Preferred Qualifications Experience working with utilities, EPC contractors, or power system integrators. Knowledge of cybersecurity best practices for power system automation. Strong analytical and problem-solving skills for grid modernization and automation projects Experience working with utilities, EPC contractors, or power system integrators, Knowledge of cybersecurity best practices for power system automation, Strong analytical and problem-solving skills for grid modernization and automation projects, Lead and manage high-voltage power transmission and automation projects, including substation automation, SCADA, EMS/DMS, and protection systems, Develop project plans, schedules, and risk management strategies to ensure timely and cost-effective execution Location : Sahibabad / Himachal (Shimla, Hamirpur & Paonta Sahib)

A snapshot of the day We are seeking a highly skilled and experienced Substation Control and Protection - Testing and Commissioning Engineer to join our team. The ideal candidate will be responsible for the testing, commissioning, and troubleshooting of substation control and protection systems to ensure their proper functioning and reliability. The candidate should have strong technical capabilities, excellent problem-solving skills, and the ability to work effectively in a team environment. Conduct testing and commissioning activities for substation control and protection systems, including relay testing, scheme testing, and protection coordination studies. Configuration, parametrization, goosing, interoperability, and integration of Protection IEDs with SAS systems. The design, engineering and implementation of substation protection systems to optimize monitoring, control, and protection functions within electrical substations. Responsible for preparation & approval of engineering document like FDS, SLD, PSLD, Signal List, Bill of Materials, General Arrangements (internal & External), Panel heat load calculation. Preparation of Testing & Commissioning documents such as FAT, SAT, Test Reports, and Schedule Plans. Troubleshoot and resolve complex technical issues related to substation control and protection systems. Collaborate with other engineering teams to ensure seamless integration of substation control and protection systems with overall substation design. Provide technical support and training to junior engineers and field personnel. Experience in supporting the factory during manufacturing, mounting of equipment & wiring, testing and pre-FAT test & FAT witness. Knowledge in cubicle AC & DC load calculation Selection of suitable equipment/material. oriented: In-depth knowledge of substation control and protection systems, including relay settings, protection schemes, and control logic. Strong understanding of substation automation systems, networking and protocols, such as IEC 61850, Modbus TCP/IP. Knowledge of Process Bus Technology. Experience with substation testing equipment, such as relay test sets, power system simulators, and fault recorders. Proficiency in analyzing and interpreting relay and protection coordination studies. Familiarity with substation design standards and regulations. Parameterization, testing and commissioning of IEDs like Protection relays and Bay Control Units (BCUs). Experience with protection & control equipment and solutions preferably from Siemens, Alstom, SEL, GE, Hitachi, ABB make IEDs. Retrofitting and troubleshooting of Protection IEDs, including the replacement of CRPs. Willingness to travel as the role demands a minimum of 50-70% travel overseas. Knowledge of Major AIS & GIS components like Circuit breakers, Isolators, CSD, PDM & Interlocks scheme. Knowledge of Transformers/Reactors & associated Conditional Monitoring Devices etc. (Preferred) Planning and execution of training courses and customer presentations. Software Skills: Proficiency in using substation testing software, such as Omicron Test Universe, Doble Protection Suite, or similar. More weightage for candidates with hand on experience in substation automation software and protocols, including SAS systems and communication protocols (e.g., Modbus, DNP3). We dont need superheroes, just super minds: This position requires a bachelors degree or equivalent with background in Electrical Engineering. Bachelors degree in electrical engineering or related field. 3-6years of experience in testing and commissioning of substation control and protection systems. Professional certifications, such as Certified Relay Technician (CRT) or Certified Protection Professional (CPP), are desirable. More weightage for candidates with hand on experience in Global Project handling. Soft Skills Excellent Communication (Both written & verbal) & Inter-personal Skills. Critical thinking, reasoning and problem solving are an essential part of this position. Enjoys learning new things and build knowledge base in new area. Enjoys working in Team environments, Exhibits collaboration in multiple stake holder interactions. Adaptive and eager to learn and work on new technologies. Innovative, self-driven, and disciplined. Strong analytical ability and problem-solving skills

Essential Responsibilities: Working knowledge of Transmission & distribution networks (from Low Voltage to Extra High voltage (132kV or upwards) specially in protection & control system designing. Develop and design Control & Protection systems for HV/EHV substations and power plants, ensuring reliable operation Prepare the technical design documents, including electrical schemes, wiring diagrams, single line diagrams, panel front views, panel layouts, cable schedules, interlocking schemes and technical specifications. Analyzing the results which are obtained from the power system simulation software. Review the technical design of the Control & Protection System drawings, detailed specification etc. with the customers for acceptance. Utilize simulation tools for protection coordination, such as DIgSILENT, to enhance protection design precision. Prepare scheme based on knowledge of protection system technologies and automation system technologies, for facilitating new connections as well as Network Upgrades along with other Design Teams for finalizing the technical specifications covering Functional requirements, Ratings and parameters, Compliance standards, Interface requirements etc. Calculate the equipment sizing circuit brakers, capacitors, conductors, cable etc. Present the technical design of the primary system drawings, detailed specification etc. with the customers and stakeholders for approval. Summarizing the technical results and technical report preparation and working with clients to finalise the Vendor Tender Documentations and technical interactions. Possess sufficient knowledge and/or experience to work safely in an HV/EHV substation, adhering to HSE regulations and industry standards such as OSHA or equivalent guidelines to mitigate risks and ensure compliance. Possess familiarity with industry standards and codes such as IEC, IEEE, and local regulations. Implement adherence to international standards such as IEC 61850, IEEE standards, and NERC CIP for cybersecurity compliance. Ensure all engineering documentation such as basic design documents, system configurations, and standard operating procedures are accurate. Provide technical support to site teams during testing and commissioning works to ensure proper functionality of protection & control systems within high & extra high voltage networks. Work closely with project managers, secondary design engineers, civil design engineers and other stakeholders to ensure seamless integration of primary systems/equipment. Job Description Protection & Control Engineer _ENWMCL Requisite work experience and skill set: A minimum of 5 years of hands-on experience with specific focus in HV/EHV substations, lines, switchgears, power plants etc. Knowledge of Transmission & Distribution UK GRID Code/ Standards Prior experience working with utilities in the UK or Europe, providing familiarity with regional regulations and operational practices. Has experience of protection equipment such as protection relays, BCU (Bay Control Unit), trip relays, AVR etc. Knowledge of IEC61850 protocol for substation control & protection system. Familiarity with relevant drawing standards such as IEC61082-1 and IEC60617. Proficiency in primary equipment sizing such as Aux. TR, Diesel Gen, cable etc. Familiarity with factory and site acceptance tests from design to approval phase Good communication and report writing skills, Team Handling skills & Project Managementskills.